In modern industrial design trends featuring with integration,miniaturization,and versatility,there is a growing demand on the utilization of microstructural array devices.The measurement of such microstructural array...In modern industrial design trends featuring with integration,miniaturization,and versatility,there is a growing demand on the utilization of microstructural array devices.The measurement of such microstructural array components often encounters challenges due to the reduced scale and complex structures,either by contact or noncontact optical approaches.Among these microstructural arrays,there are still no optical measurement methods for micro corner-cube reflector arrays.To solve this problem,this study introduces a method for effectively eliminating coherent noise and achieving surface profile reconstruction in interference measurements of microstructural arrays.The proposed denoising method allows the calibration and inverse solving of system errors in the frequency domain by employing standard components with known surface types.This enables the effective compensation of the complex amplitude of non-sample coherent light within the interferometer optical path.The proposed surface reconstruction method enables the profile calculation within the situation that there is complex multi-reflection during the propagation of rays in microstructural arrays.Based on the measurement results,two novel metrics are defined to estimate diffraction errors at array junctions and comprehensive errors across multiple array elements,offering insights into other types of microstructure devices.This research not only addresses challenges of the coherent noise and multi-reflection,but also makes a breakthrough for quantitively optical interference measurement of microstructural array devices.展开更多
The multiplexing ability of a novel multiplexing fiber Bragg grating （FBG） method based on Optical Time Domain Reflecto meter （OTDR） and Time Division Multiplexing TDM technologies has been theoretically analyzed ...The multiplexing ability of a novel multiplexing fiber Bragg grating （FBG） method based on Optical Time Domain Reflecto meter （OTDR） and Time Division Multiplexing TDM technologies has been theoretically analyzed and studied. This method permits the interrogation of hundreds of identical FBGs with low reflectivity in a single fiber, making the FBG sensors more applicable in the aerospace health monitoring engineering. The analysis shows that the multiplexing ability can be greatly improved if the FBG reflectivity is sufficiently low. And hence, an inexpensive large-scale distributed sensing system based on this method can be realized, When evaluating the multiplexing ability of this system, we propose for the first time that the interference effect of multi-reflections among FBGs should be taken into consideration.展开更多
We report the design of a novel multiband metamaterial bandpass filter （BPF） in the terahertz （THz）-wave region. The designed BPF is composed of a metal-dielectric-metal sandwiched structure with three nested ring...We report the design of a novel multiband metamaterial bandpass filter （BPF） in the terahertz （THz）-wave region. The designed BPF is composed of a metal-dielectric-metal sandwiched structure with three nested rings on the top surface and a cross structure on the bottom surface. Full-wave simulation results show that the designed BPF has three transmission peaks at frequencies of 0.42, 1.27, and 1.86 THz with transmission rates of-0.87,-1.85, and-1.83 dB, respectively. Multi-reflection interference theory is introduced to explain the transmission mechanism of the designed triple-band BPF. The theoretical transmission spectrum is in good agreement with the full-wave simulated results. The designed BPF can maintain a stable performance as the incident angle varies from 0 to 30 for both transverse electric and transverse magnetic polarizations of the incident wave. The designed BPF can be potentially used in THz devices due to its multiband transmissions, polarization insensitivity, and stable wide-angle response in the THz region.展开更多
Magnetic shielding of grain-oriented silicon steel was investigated. Ball scribing with spacing of 2 to 16 mm was performed at peak flux densities of 8.0 mT to 1.3 T. Magnetic shielding efficiency was calculated, incl...Magnetic shielding of grain-oriented silicon steel was investigated. Ball scribing with spacing of 2 to 16 mm was performed at peak flux densities of 8.0 mT to 1.3 T. Magnetic shielding efficiency was calculated, including absorption, reflection and inner multi-reflection shielding efficiencies. Magnetic shielding efficiency （MSE） increase ratios after different scribing spacing were compared, and thickness requirement to achieve absorption shielding of 50 dB was also calculated. The results show that magnetic shielding efficiencies of C711 and H668 silicon steels increase by 4.79 and 3.15 dB respectively after scribing of 16 mm. Before scribing, shielding efficiency of H668 steel was higher than that of C711 steel, while after scribing, both absorption and shielding efficiency gaps were largely abridged between C711 and H668 steels. Plate thickness of C711 steel could be reduced from 3.18 mm without scribing to 2. 20 mm after scribing of 16 mm. There is no apparent thickness reduction at lower flux densities; while the peak flux density is above 0.3 T, the shielding effect becomes apparent, and the thickness could be reduced from 2.28 mm without scribing to 1.70 mm with scribing spacing of 16 ram. Magnetizing process and its effect on variation of magnetic shielding were also analyzed.展开更多
A simple design of broadband metamaterial absorber（MA） based on resistive film is numerically presented in this paper.The unit cell of this absorber is composed of crossed rectangular rings-shaped resistive film,die...A simple design of broadband metamaterial absorber（MA） based on resistive film is numerically presented in this paper.The unit cell of this absorber is composed of crossed rectangular rings-shaped resistive film,dielectric substrate,and continuous metal film.The simulated results indicate that the absorber obtains a 12.82-GHz-wide absorption from about 4.75 GHz to 17.57 GHz with absorptivity over 90% at normal incidence.Distribution of surface power loss density is illustrated to understand the intrinsic absorption mechanism of the structure.The proposed structure can work at wide polarization angles and wide angles of incidence for both transverse electric（TE） and transverse magnetic（TM） waves.Finally,the multi-reflection interference theory is involved to analyze and explain the broadband absorption mechanism at both normal and oblique incidence.Moreover,the polarization-insensitive feature is also investigated by using the interference model.It is seen that the simulated and calculated absorption rates agree fairly well with each other for the absorber.展开更多
The influence of the gap on the absorption performance of the conventional split ring resonator(SRR) absorber is investigated at microwave frequencies. Our simulated results reveal that the geometry of the square SRR ...The influence of the gap on the absorption performance of the conventional split ring resonator(SRR) absorber is investigated at microwave frequencies. Our simulated results reveal that the geometry of the square SRR can be equivalent to a Jerusalem cross(JC) resonator and its corresponding metamaterial absorber(MA) is changed to a JC absorber. The JC MA exhibits an experimental absorption peak of 99.1% at 8.72 GHz, which shows an excellent agreement with our simulated results. By simply assembling several JCs with slightly different geometric parameters next to each other into a unit cell, a perfect multi-band absorption can be effectively obtained. The experimental results show that the MA has four distinct and strong absorption peaks at 8.32 GHz, 9.8 GHz, 11.52 GHz and 13.24 GHz. Finally, the multi-reflection interference theory is introduced to interpret the absorption mechanism.展开更多
基金Supported by National Natural Science Foundation of China(Grant Nos.52375414,52075100)Shanghai Science and Technology Committee Innovation Grant of China(Grant No.23ZR1404200).
文摘In modern industrial design trends featuring with integration,miniaturization,and versatility,there is a growing demand on the utilization of microstructural array devices.The measurement of such microstructural array components often encounters challenges due to the reduced scale and complex structures,either by contact or noncontact optical approaches.Among these microstructural arrays,there are still no optical measurement methods for micro corner-cube reflector arrays.To solve this problem,this study introduces a method for effectively eliminating coherent noise and achieving surface profile reconstruction in interference measurements of microstructural arrays.The proposed denoising method allows the calibration and inverse solving of system errors in the frequency domain by employing standard components with known surface types.This enables the effective compensation of the complex amplitude of non-sample coherent light within the interferometer optical path.The proposed surface reconstruction method enables the profile calculation within the situation that there is complex multi-reflection during the propagation of rays in microstructural arrays.Based on the measurement results,two novel metrics are defined to estimate diffraction errors at array junctions and comprehensive errors across multiple array elements,offering insights into other types of microstructure devices.This research not only addresses challenges of the coherent noise and multi-reflection,but also makes a breakthrough for quantitively optical interference measurement of microstructural array devices.
基金Foundation item： National Natural Science Foundation of China （10376001）
文摘The multiplexing ability of a novel multiplexing fiber Bragg grating （FBG） method based on Optical Time Domain Reflecto meter （OTDR） and Time Division Multiplexing TDM technologies has been theoretically analyzed and studied. This method permits the interrogation of hundreds of identical FBGs with low reflectivity in a single fiber, making the FBG sensors more applicable in the aerospace health monitoring engineering. The analysis shows that the multiplexing ability can be greatly improved if the FBG reflectivity is sufficiently low. And hence, an inexpensive large-scale distributed sensing system based on this method can be realized, When evaluating the multiplexing ability of this system, we propose for the first time that the interference effect of multi-reflections among FBGs should be taken into consideration.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11504418,11447033,and 61372048)the Fundamental Research Funds for the Central Universities,China(Grant No.2015XKMS075)
文摘We report the design of a novel multiband metamaterial bandpass filter （BPF） in the terahertz （THz）-wave region. The designed BPF is composed of a metal-dielectric-metal sandwiched structure with three nested rings on the top surface and a cross structure on the bottom surface. Full-wave simulation results show that the designed BPF has three transmission peaks at frequencies of 0.42, 1.27, and 1.86 THz with transmission rates of-0.87,-1.85, and-1.83 dB, respectively. Multi-reflection interference theory is introduced to explain the transmission mechanism of the designed triple-band BPF. The theoretical transmission spectrum is in good agreement with the full-wave simulated results. The designed BPF can maintain a stable performance as the incident angle varies from 0 to 30 for both transverse electric and transverse magnetic polarizations of the incident wave. The designed BPF can be potentially used in THz devices due to its multiband transmissions, polarization insensitivity, and stable wide-angle response in the THz region.
基金Item Sponsored by National Natural Science Foundation of China(51174057,51274062)National High Technology Research and Development Program of China(2012AA03A503)
文摘Magnetic shielding of grain-oriented silicon steel was investigated. Ball scribing with spacing of 2 to 16 mm was performed at peak flux densities of 8.0 mT to 1.3 T. Magnetic shielding efficiency was calculated, including absorption, reflection and inner multi-reflection shielding efficiencies. Magnetic shielding efficiency （MSE） increase ratios after different scribing spacing were compared, and thickness requirement to achieve absorption shielding of 50 dB was also calculated. The results show that magnetic shielding efficiencies of C711 and H668 silicon steels increase by 4.79 and 3.15 dB respectively after scribing of 16 mm. Before scribing, shielding efficiency of H668 steel was higher than that of C711 steel, while after scribing, both absorption and shielding efficiency gaps were largely abridged between C711 and H668 steels. Plate thickness of C711 steel could be reduced from 3.18 mm without scribing to 2. 20 mm after scribing of 16 mm. There is no apparent thickness reduction at lower flux densities; while the peak flux density is above 0.3 T, the shielding effect becomes apparent, and the thickness could be reduced from 2.28 mm without scribing to 1.70 mm with scribing spacing of 16 ram. Magnetizing process and its effect on variation of magnetic shielding were also analyzed.
文摘A simple design of broadband metamaterial absorber（MA） based on resistive film is numerically presented in this paper.The unit cell of this absorber is composed of crossed rectangular rings-shaped resistive film,dielectric substrate,and continuous metal film.The simulated results indicate that the absorber obtains a 12.82-GHz-wide absorption from about 4.75 GHz to 17.57 GHz with absorptivity over 90% at normal incidence.Distribution of surface power loss density is illustrated to understand the intrinsic absorption mechanism of the structure.The proposed structure can work at wide polarization angles and wide angles of incidence for both transverse electric（TE） and transverse magnetic（TM） waves.Finally,the multi-reflection interference theory is involved to analyze and explain the broadband absorption mechanism at both normal and oblique incidence.Moreover,the polarization-insensitive feature is also investigated by using the interference model.It is seen that the simulated and calculated absorption rates agree fairly well with each other for the absorber.
基金Project supported by the National Natural Science Foundation of China （Grant Nos. 10775055 and 11105002） and the Open-end Fund of State Key Laboratory of Structural Analysis for Industrial Equipment, China （Grant No. GZ 1215）.
文摘The influence of the gap on the absorption performance of the conventional split ring resonator(SRR) absorber is investigated at microwave frequencies. Our simulated results reveal that the geometry of the square SRR can be equivalent to a Jerusalem cross(JC) resonator and its corresponding metamaterial absorber(MA) is changed to a JC absorber. The JC MA exhibits an experimental absorption peak of 99.1% at 8.72 GHz, which shows an excellent agreement with our simulated results. By simply assembling several JCs with slightly different geometric parameters next to each other into a unit cell, a perfect multi-band absorption can be effectively obtained. The experimental results show that the MA has four distinct and strong absorption peaks at 8.32 GHz, 9.8 GHz, 11.52 GHz and 13.24 GHz. Finally, the multi-reflection interference theory is introduced to interpret the absorption mechanism.
