Spaceborne antennas are essential for remote sensing,deep-space communication,and Earth observation,yet their trajectory planning is complicated by nonlinear base-manipulator coupling and antenna flexibility.To addres...Spaceborne antennas are essential for remote sensing,deep-space communication,and Earth observation,yet their trajectory planning is complicated by nonlinear base-manipulator coupling and antenna flexibility.To address these challenges,this paper proposes a multi-objective trajectory optimization framework.The system dynamics capture both nonlinear rigid-flexible coupling and antenna deformation through a reduced-order formulation.To enhance discretization efficiency,a predictive-terminal hp-adaptive pseudospectral method is employed,assigning collocation density based on task-phase characteristics:finer resolution is applied to dynamic segments requiring higher accuracy,especially near the terminal phase.This enables efficient transcription of the continuous-time problem into a Nonlinear Programming Problem(NLP).The resulting NLP is then solved using a multi-objective optimization strategy based on the nondominated sorting genetic algorithm II,which explores trade-offs among antenna pointing accuracy,energy consumption,and structural vibration.Numerical results demonstrate that the proposed method achieves a reduction of approximately 14.0% in control energy and 41.8%in peak actuation compared to a GPOPS-II baseline,while significantly enhancing vibration suppression.The resulting Pareto front reveals structured trade-offs and clustered solutions,offering robust and diverse options for precision,low-disturbance mission planning.展开更多
Autonomous connected vehicles(ACV)involve advanced control strategies to effectively balance safety,efficiency,energy consumption,and passenger comfort.This research introduces a deep reinforcement learning(DRL)-based...Autonomous connected vehicles(ACV)involve advanced control strategies to effectively balance safety,efficiency,energy consumption,and passenger comfort.This research introduces a deep reinforcement learning(DRL)-based car-following(CF)framework employing the Deep Deterministic Policy Gradient(DDPG)algorithm,which integrates a multi-objective reward function that balances the four goals while maintaining safe policy learning.Utilizing real-world driving data from the highD dataset,the proposed model learns adaptive speed control policies suitable for dynamic traffic scenarios.The performance of the DRL-based model is evaluated against a traditional model predictive control-adaptive cruise control(MPC-ACC)controller.Results show that theDRLmodel significantly enhances safety,achieving zero collisions and a higher average time-to-collision(TTC)of 8.45 s,compared to 5.67 s for MPC and 6.12 s for human drivers.For efficiency,the model demonstrates 89.2% headway compliance and maintains speed tracking errors below 1.2 m/s in 90% of cases.In terms of energy optimization,the proposed approach reduces fuel consumption by 5.4% relative to MPC.Additionally,it enhances passenger comfort by lowering jerk values by 65%,achieving 0.12 m/s3 vs.0.34 m/s3 for human drivers.A multi-objective reward function is integrated to ensure stable policy convergence while simultaneously balancing the four key performance metrics.Moreover,the findings underscore the potential of DRL in advancing autonomous vehicle control,offering a robust and sustainable solution for safer,more efficient,and more comfortable transportation systems.展开更多
Task scheduling in cloud computing is a multi-objective optimization problem,often involving conflicting objectives such as minimizing execution time,reducing operational cost,and maximizing resource utilization.Howev...Task scheduling in cloud computing is a multi-objective optimization problem,often involving conflicting objectives such as minimizing execution time,reducing operational cost,and maximizing resource utilization.However,traditional approaches frequently rely on single-objective optimization methods which are insufficient for capturing the complexity of such problems.To address this limitation,we introduce MDMOSA(Multi-objective Dwarf Mongoose Optimization with Simulated Annealing),a hybrid that integrates multi-objective optimization for efficient task scheduling in Infrastructure-as-a-Service(IaaS)cloud environments.MDMOSA harmonizes the exploration capabilities of the biologically inspired Dwarf Mongoose Optimization(DMO)with the exploitation strengths of Simulated Annealing(SA),achieving a balanced search process.The algorithm aims to optimize task allocation by reducing makespan and financial cost while improving system resource utilization.We evaluate MDMOSA through extensive simulations using the real-world Google Cloud Jobs(GoCJ)dataset within the CloudSim environment.Comparative analysis against benchmarked algorithms such as SMOACO,MOTSGWO,and MFPAGWO reveals that MDMOSA consistently achieves superior performance in terms of scheduling efficiency,cost-effectiveness,and scalability.These results confirm the potential of MDMOSA as a robust and adaptable solution for resource scheduling in dynamic and heterogeneous cloud computing infrastructures.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
In a wide range of engineering applications,complex constrained multi-objective optimization problems(CMOPs)present significant challenges,as the complexity of constraints often hampers algorithmic convergence and red...In a wide range of engineering applications,complex constrained multi-objective optimization problems(CMOPs)present significant challenges,as the complexity of constraints often hampers algorithmic convergence and reduces population diversity.To address these challenges,we propose a novel algorithm named Constraint IntensityDriven Evolutionary Multitasking(CIDEMT),which employs a two-stage,tri-task framework to dynamically integrates problem structure and knowledge transfer.In the first stage,three cooperative tasks are designed to explore the Constrained Pareto Front(CPF),the Unconstrained Pareto Front(UPF),and theε-relaxed constraint boundary,respectively.A CPF-UPF relationship classifier is employed to construct a problem-type-aware evolutionary strategy pool.At the end of the first stage,each task selects strategies from this strategy pool based on the specific type of problem,thereby guiding the subsequent evolutionary process.In the second stage,while each task continues to evolve,aτ-driven knowledge transfer mechanism is introduced to selectively incorporate effective solutions across tasks.enhancing the convergence and feasibility of the main task.Extensive experiments conducted on 32 benchmark problems from three test suites(LIRCMOP,DASCMOP,and DOC)demonstrate that CIDEMT achieves the best Inverted Generational Distance(IGD)values on 24 problems and the best Hypervolume values(HV)on 22 problems.Furthermore,CIDEMT significantly outperforms six state-of-the-art constrained multi-objective evolutionary algorithms(CMOEAs).These results confirm CIDEMT’s superiority in promoting convergence,diversity,and robustness in solving complex CMOPs.展开更多
In the independent electro-hydrogen system(IEHS)with hybrid energy storage(HESS),achieving optimal scheduling is crucial.Still,it presents a challenge due to the significant deviations in values ofmultiple optimizatio...In the independent electro-hydrogen system(IEHS)with hybrid energy storage(HESS),achieving optimal scheduling is crucial.Still,it presents a challenge due to the significant deviations in values ofmultiple optimization objective functions caused by their physical dimensions.These deviations seriously affect the scheduling process.A novel standardization fusion method has been established to address this issue by analyzing the variation process of each objective function’s values.The optimal scheduling results of IEHS with HESS indicate that the economy and overall energy loss can be improved 2–3 times under different optimization methods.The proposed method better balances all optimization objective functions and reduces the impact of their dimensionality.When the cost of BESS decreases by approximately 30%,its participation deepens by about 1 time.Moreover,if the price of the electrolyzer is less than 15¥/kWh or if the cost of the fuel cell drops below 4¥/kWh,their participation will increase substantially.This study aims to provide a more reasonable approach to solving multi-objective optimization problems.展开更多
Community detection is one of the most fundamental applications in understanding the structure of complicated networks.Furthermore,it is an important approach to identifying closely linked clusters of nodes that may r...Community detection is one of the most fundamental applications in understanding the structure of complicated networks.Furthermore,it is an important approach to identifying closely linked clusters of nodes that may represent underlying patterns and relationships.Networking structures are highly sensitive in social networks,requiring advanced techniques to accurately identify the structure of these communities.Most conventional algorithms for detecting communities perform inadequately with complicated networks.In addition,they miss out on accurately identifying clusters.Since single-objective optimization cannot always generate accurate and comprehensive results,as multi-objective optimization can.Therefore,we utilized two objective functions that enable strong connections between communities and weak connections between them.In this study,we utilized the intra function,which has proven effective in state-of-the-art research studies.We proposed a new inter-function that has demonstrated its effectiveness by making the objective of detecting external connections between communities is to make them more distinct and sparse.Furthermore,we proposed a Multi-Objective community strength enhancement algorithm(MOCSE).The proposed algorithm is based on the framework of the Multi-Objective Evolutionary Algorithm with Decomposition(MOEA/D),integrated with a new heuristic mutation strategy,community strength enhancement(CSE).The results demonstrate that the model is effective in accurately identifying community structures while also being computationally efficient.The performance measures used to evaluate the MOEA/D algorithm in our work are normalized mutual information(NMI)and modularity(Q).It was tested using five state-of-the-art algorithms on social networks,comprising real datasets(Zachary,Dolphin,Football,Krebs,SFI,Jazz,and Netscience),as well as twenty synthetic datasets.These results provide the robustness and practical value of the proposed algorithm in multi-objective community identification.展开更多
Federated learning is a distributed framework that trains a centralised model using data from multiple clients without transferring that data to a central server.Despite rapid progress,federated learning still faces s...Federated learning is a distributed framework that trains a centralised model using data from multiple clients without transferring that data to a central server.Despite rapid progress,federated learning still faces several unsolved challenges.Specifically,communication costs and system heterogeneity,such as nonidentical data distribution,hinder federated learning's progress.Several approaches have recently emerged for federated learning involving heterogeneous clients with varying computational capabilities(namely,heterogeneous federated learning).However,heterogeneous federated learning faces two key challenges:optimising model size and determining client selection ratios.Moreover,efficiently aggregating local models from clients with diverse capabilities is crucial for addressing system heterogeneity and communication efficiency.This paper proposes an evolutionary multiobjective optimisation framework for heterogeneous federated learning(MOHFL)to address these issues.Our approach elegantly formulates and solves a biobjective optimisation problem that minimises communication cost and model error rate.The decision variables in this framework comprise model sizes and client selection ratios for each Q client cluster,yielding a total of 2×Q optimisation parameters to be tuned.We develop a partition-based strategy for MOHFL that segregates clients into clusters based on their communication and computation capabilities.Additionally,we implement an adaptive model sizing mechanism that dynamically assigns appropriate subnetwork architectures to clients based on their computational constraints.We also propose a unified aggregation framework to combine models of varying sizes from heterogeneous clients effectively.Extensive experiments on multiple datasets demonstrate the effectiveness and superiority of our proposed method compared to existing approaches.展开更多
The key parameters that characterize the morphological quality of multi-layer and multi-pass metal laser deposited parts are the surface roughness and the error between the actual printing height and the theoretical m...The key parameters that characterize the morphological quality of multi-layer and multi-pass metal laser deposited parts are the surface roughness and the error between the actual printing height and the theoretical model height.The Taguchi method was employed to establish the correlations between process parameter combinations and multi-objective characterization of metal deposition morphology(height error and roughness).Results show that using the signal-to-noise ratio and grey relational analysis,the optimal parameter combination for multi-layer and multi-pass deposition is determined as follows:laser power of 800 W,powder feeding rate of 0.3 r/min,step distance of 1.6 mm,and scanning speed of 20 mm/s.Subsequently,a Genetic Bayesian-back propagation(GB-BP)network is constructed to predict multi-objective responses.Compared with the traditional back propagation network,the GB-back propagation network improves the prediction accuracy of height error and surface roughness by 43.14%and 71.43%,respectively.This network can accurately predict the multi-objective characterization of morphological quality of multi-layer and multi-pass metal deposited parts.展开更多
Vehicle Edge Computing(VEC)and Cloud Computing(CC)significantly enhance the processing efficiency of delay-sensitive and computation-intensive applications by offloading compute-intensive tasks from resource-constrain...Vehicle Edge Computing(VEC)and Cloud Computing(CC)significantly enhance the processing efficiency of delay-sensitive and computation-intensive applications by offloading compute-intensive tasks from resource-constrained onboard devices to nearby Roadside Unit(RSU),thereby achieving lower delay and energy consumption.However,due to the limited storage capacity and energy budget of RSUs,it is challenging to meet the demands of the highly dynamic Internet of Vehicles(IoV)environment.Therefore,determining reasonable service caching and computation offloading strategies is crucial.To address this,this paper proposes a joint service caching scheme for cloud-edge collaborative IoV computation offloading.By modeling the dynamic optimization problem using Markov Decision Processes(MDP),the scheme jointly optimizes task delay,energy consumption,load balancing,and privacy entropy to achieve better quality of service.Additionally,a dynamic adaptive multi-objective deep reinforcement learning algorithm is proposed.Each Double Deep Q-Network(DDQN)agent obtains rewards for different objectives based on distinct reward functions and dynamically updates the objective weights by learning the value changes between objectives using Radial Basis Function Networks(RBFN),thereby efficiently approximating the Pareto-optimal decisions for multiple objectives.Extensive experiments demonstrate that the proposed algorithm can better coordinate the three-tier computing resources of cloud,edge,and vehicles.Compared to existing algorithms,the proposed method reduces task delay and energy consumption by 10.64%and 5.1%,respectively.展开更多
Rapid urbanization in China has led to spatial antagonism between urban development and farmland protection and ecological security maintenance.Multi-objective spatial collaborative optimization is a powerful method f...Rapid urbanization in China has led to spatial antagonism between urban development and farmland protection and ecological security maintenance.Multi-objective spatial collaborative optimization is a powerful method for achieving sustainable regional development.Previous studies on multi-objective spatial optimization do not involve spatial corrections to simulation results based on the natural endowment of space resources.This study proposes an Ecological Security-Food Security-Urban Sustainable Development(ES-FS-USD)spatial optimization framework.This framework combines the non-dominated sorting genetic algorithm II(NSGA-II)and patch-generating land use simulation(PLUS)model with an ecological protection importance evaluation,comprehensive agricultural productivity evaluation,and urban sustainable development potential assessment and optimizes the territorial space in the Yangtze River Delta(YRD)region in 2035.The proposed sustainable development(SD)scenario can effectively reduce the destruction of landscape patterns of various land-use types while considering both ecological and economic benefits.The simulation results were further revised by evaluating the land-use suitability of the YRD region.According to the revised spatial pattern for the YRD in 2035,the farmland area accounts for 43.59%of the total YRD,which is 5.35%less than that in 2010.Forest,grassland,and water area account for 40.46%of the total YRD—an increase of 1.42%compared with the case in 2010.Construction land accounts for 14.72%of the total YRD—an increase of 2.77%compared with the case in 2010.The ES-FS-USD spatial optimization framework ensures that spatial optimization outcomes are aligned with the natural endowments of land resources,thereby promoting the sustainable use of land resources,improving the ability of spatial management,and providing valuable insights for decision makers.展开更多
The rapid growth of mobile and Internet of Things(IoT)applications in dense urban environments places stringent demands on future Beyond 5G(B5G)or Beyond 6G(B6G)networks,which must ensure high Quality of Service(QoS)w...The rapid growth of mobile and Internet of Things(IoT)applications in dense urban environments places stringent demands on future Beyond 5G(B5G)or Beyond 6G(B6G)networks,which must ensure high Quality of Service(QoS)while maintaining cost-efficiency and sustainable deployment.Traditional strategies struggle with complex 3D propagation,building penetration loss,and the balance between coverage and infrastructure cost.To address this challenge,this study presents the first application of a Global-best Guided Quantum-inspired Tabu Search with Quantum-Not Gate(GQTS-QNG)framework for 3D base-station deployment optimization.The problem is formulated as a multi-objective model that simultaneously maximizes coverage and minimizes deployment cost.A binary-to-decimal encodingmechanism is designed to represent discrete placement coordinates and base station types,leveraging a quantum-inspired method to efficiently search and refine solutions within challenging combinatorial environments.Global-best guidance and tabu memory are integrated to strengthen convergence stability and avoid revisiting previously explored solutions.Simulation results across user densities ranging from 1000 to 10,000 show that GQTS-QNG consistently finds deployment configurations achieving full coverage while reducing deployment cost compared with the state-of-the-art algorithms under equal iteration times.Additionally,our method generates welldistributed and structured Pareto fronts,offering diverse planning options that allow operators to flexibly balance cost and performance requirements.These findings demonstrate that GQTS-QNG is a scalable and efficient algorithm for sustainable 3D cellular network deployment in B5G/6G urban scenarios.展开更多
Impinging jet arrays are extensively used in numerous industrial operations,including the cooling of electronics,turbine blades,and other high-heat flux systems because of their superior heat transfer capabilities.Opt...Impinging jet arrays are extensively used in numerous industrial operations,including the cooling of electronics,turbine blades,and other high-heat flux systems because of their superior heat transfer capabilities.Optimizing the design and operating parameters of such systems is essential to enhance cooling efficiency and achieve uniform pressure distribution,which can lead to improved system performance and energy savings.This paper presents two multi-objective optimization methodologies for a turbulent air jet impingement cooling system.The governing equations are resolved employing the commercial computational fluid dynamics(CFD)software ANSYS Fluent v17.The study focuses on four controlling parameters:Reynolds number(Re),swirl number(S),jet-to-jet separation distance(Z/D),and impingement height(H/D).The effects of these parameters on heat transfer and impingement pressure distribution are investigated.Non-dominated Sorting Genetic Algorithm(NSGA-II)and Weighted Sum Method(WSM)are employed to optimize the controlling parameters for maximum cooling performance.The aim is to identify optimal design parameters and system configurations that enhance heat transfer efficiency while achieving a uniform impingement pressure distribution.These findings have practical implications for applications requiring efficient cooling.The optimized design achieved a 12.28%increase in convective heat transfer efficiency with a local Nusselt number of 113.05 compared to 100.69 in the reference design.Enhanced convective cooling and heat flux were observed in the optimized configuration,particularly in areas of direct jet impingement.Additionally,the optimized design maintained lower wall temperatures,demonstrating more effective thermal dissipation.展开更多
Cobalt phosphide has been successfully used as a catalyst in the production of ammonia from nitric acid.Substituting appropriate atoms is expected to further improve its catalytic performance.Owing to the diversity of...Cobalt phosphide has been successfully used as a catalyst in the production of ammonia from nitric acid.Substituting appropriate atoms is expected to further improve its catalytic performance.Owing to the diversity of substituting elements,substitution sites,adsorption sites,and adsorption configurations,extensive time-consuming simulation calculations are required for the high-throughput screening method.Additionally,multi-objective attributes should be considered simultaneously in catalytic design.To tackle this challenge,this paper suggests a multi-objective cobalt phosphide catalytic material design method based on surrogate models.And the effectiveness of the proposed method was validated through comparative experiments.The proposed method led to the discovery of fifteen promising cobalt phosphide catalyst configurations.This study provides a new avenue for expediting the design of catalyst,with the potential for application in other systems.展开更多
Intelligent production is an important development direction in intelligent manufacturing,with intelligent factories playing a crucial role in promoting intelligent production.Flexible job shops,as the main form of in...Intelligent production is an important development direction in intelligent manufacturing,with intelligent factories playing a crucial role in promoting intelligent production.Flexible job shops,as the main form of intelligent factories,constantly face dynamic disturbances during the production process,including machine failures and urgent orders.This paper discusses the basic models and research methods of job shop scheduling,emphasizing the important role of dynamic job shop scheduling and its response schemes in future research.A multi-objective flexible job shop dynamic scheduling mathematical model is established,highlighting its complex and multi-constraint characteristics under different interferences.A classification discussion is conducted on the dynamic response methods and optimization objectives under machine failures,emergency orders,fuzzy completion times,and mixed dynamic events.The development process of traditional scheduling rules and intelligent methods in dynamic scheduling are also analyzed.Finally,based on the current development status of job shop scheduling and the requirements of intelligent manufacturing,the future development trends of dynamic scheduling in flexible job shops are proposed.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
To expedite the large-scale deployment of driverless taxis and advance the autonomous driving industry,research on the location of integrated parking and charging facilities for driverless taxis has emerged as a signi...To expedite the large-scale deployment of driverless taxis and advance the autonomous driving industry,research on the location of integrated parking and charging facilities for driverless taxis has emerged as a significant issue in urban traffic.This study employs a progressive"preliminary selection-screening-optimal selection"approach for site selec-tion.First,the preliminary selection of parking sites is conducted by clustering various point-of-interest types.Subsequently,a multi-objective site selection model is developed to maximize the coverage of demand points,minimize construction costs,address the lar-gest population demands,and minimize the distance between demand points and candi-date sites.The non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ)is adopted to obtain several Pareto optimal solutions.The evaluation indexes are selected according to opera-tors,users,and the public transport system to estimate the Pareto optimal solutions,and then the final location solution can be obtained.The calculation methods for several key parameters are improved during the modeling process.Location potential and location influence coefficient are selected to adjust the number of driverless taxi parking spaces.Additionally,isochrones drawn based on the actual road network and path planning repre-sent the service range of candidate points.Meanwhile,distance based on actual road net-work rather than Euclidean distance is introduced to calculate the distance between candidate points.Finally,a case study shows that the method proposed in this study could reduce the total initial travel time to reach the demand points by 64%,which is indepen-dent of operational scheduling.展开更多
In this paper,a topology optimization method for coordinated stiffness and strength design is proposed under mass constraints,utilizing the Solid Isotropic Material with Penalization approach.Element densities are reg...In this paper,a topology optimization method for coordinated stiffness and strength design is proposed under mass constraints,utilizing the Solid Isotropic Material with Penalization approach.Element densities are regulated through sensitivity filtering tomitigate numerical instabilities associatedwith stress concentrations.Ap-norm aggregation function is employed to globalize local stress constraints,and a normalization technique linearly weights strain energy and stress,transforming the multi-objective problem into a single-objective formulation.The sensitivity of the objective function with respect to design variables is rigorously derived.Three numerical examples are presented,comparing the optimized structures in terms of strain energy,mass,and stress across five different mathematical models with varying combinations of optimization objectives.The results validate the effectiveness and feasibility of the proposed method for achieving a balanced design between structural stiffness and strength.This approach offers a new perspective for future research on stiffness-strength coordinated structural optimization.展开更多
To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise mode...To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise modeling strategy,cell array operation principle,and Copula theory.Under this framework,we propose a DSM-based Enhanced Kriging(DSMEK)algorithm to synchronously derive the modeling of multi-objective,and explore an adaptive Copula function approach to analyze the correlation among multiple objectives and to assess the synthetical reliability level.In the proposed DSMEK and adaptive Copula methods,the Kriging model is treated as the basis function of DSMEK model,the Multi-Objective Snake Optimizer(MOSO)algorithm is used to search the optimal values of hyperparameters of basis functions,the cell array operation principle is adopted to establish a whole model of multiple objectives,the goodness of fit is utilized to determine the forms of Copula functions,and the determined Copula functions are employed to perform the reliability analyses of the correlation of multi-analytical objectives.Furthermore,three examples,including multi-objective complex function approximation,aeroengine turbine bladeddisc multi-failure mode reliability analyses and aircraft landing gear system brake temperature reliability analyses,are performed to verify the effectiveness of the proposed methods,from the viewpoints of mathematics and engineering.The results show that the DSMEK and adaptive Copula approaches hold obvious advantages in terms of modeling features and simulation performance.The efforts of this work provide a useful way for the modeling of multi-analytical objectives and synthetical reliability analyses of complex structure/system with multi-output responses.展开更多
The uniform design and response surface methodology （RSM） are applied to the multi-objective optimization of a 2-D mixed compression scramjet inlet. The set of experimental design points on the design space is selec...The uniform design and response surface methodology （RSM） are applied to the multi-objective optimization of a 2-D mixed compression scramjet inlet. The set of experimental design points on the design space is selected by the uniform design, and the inlet performance is analyzed by computational fluid dynamics （CFD）. Then complete quadratic polynomial response surface approximation models are constructed based on the performance analysis results and then used to replace theoriginal complex inlet performance model. The optimization is conducted using a multi-objective genetic algorithm NSGA-Ⅱ, and the Pareto optimal solution set is obtained. Results show that the uniform design and RSM can reduce the computational complexity of numerical simulation and improve the optimization efficiency.展开更多
基金supported by the National Natural Science Foundation of China(No.62173107).
文摘Spaceborne antennas are essential for remote sensing,deep-space communication,and Earth observation,yet their trajectory planning is complicated by nonlinear base-manipulator coupling and antenna flexibility.To address these challenges,this paper proposes a multi-objective trajectory optimization framework.The system dynamics capture both nonlinear rigid-flexible coupling and antenna deformation through a reduced-order formulation.To enhance discretization efficiency,a predictive-terminal hp-adaptive pseudospectral method is employed,assigning collocation density based on task-phase characteristics:finer resolution is applied to dynamic segments requiring higher accuracy,especially near the terminal phase.This enables efficient transcription of the continuous-time problem into a Nonlinear Programming Problem(NLP).The resulting NLP is then solved using a multi-objective optimization strategy based on the nondominated sorting genetic algorithm II,which explores trade-offs among antenna pointing accuracy,energy consumption,and structural vibration.Numerical results demonstrate that the proposed method achieves a reduction of approximately 14.0% in control energy and 41.8%in peak actuation compared to a GPOPS-II baseline,while significantly enhancing vibration suppression.The resulting Pareto front reveals structured trade-offs and clustered solutions,offering robust and diverse options for precision,low-disturbance mission planning.
基金the Hebei Province Science and Technology Plan Project(19221909D)rincess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R308),Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Autonomous connected vehicles(ACV)involve advanced control strategies to effectively balance safety,efficiency,energy consumption,and passenger comfort.This research introduces a deep reinforcement learning(DRL)-based car-following(CF)framework employing the Deep Deterministic Policy Gradient(DDPG)algorithm,which integrates a multi-objective reward function that balances the four goals while maintaining safe policy learning.Utilizing real-world driving data from the highD dataset,the proposed model learns adaptive speed control policies suitable for dynamic traffic scenarios.The performance of the DRL-based model is evaluated against a traditional model predictive control-adaptive cruise control(MPC-ACC)controller.Results show that theDRLmodel significantly enhances safety,achieving zero collisions and a higher average time-to-collision(TTC)of 8.45 s,compared to 5.67 s for MPC and 6.12 s for human drivers.For efficiency,the model demonstrates 89.2% headway compliance and maintains speed tracking errors below 1.2 m/s in 90% of cases.In terms of energy optimization,the proposed approach reduces fuel consumption by 5.4% relative to MPC.Additionally,it enhances passenger comfort by lowering jerk values by 65%,achieving 0.12 m/s3 vs.0.34 m/s3 for human drivers.A multi-objective reward function is integrated to ensure stable policy convergence while simultaneously balancing the four key performance metrics.Moreover,the findings underscore the potential of DRL in advancing autonomous vehicle control,offering a robust and sustainable solution for safer,more efficient,and more comfortable transportation systems.
文摘Task scheduling in cloud computing is a multi-objective optimization problem,often involving conflicting objectives such as minimizing execution time,reducing operational cost,and maximizing resource utilization.However,traditional approaches frequently rely on single-objective optimization methods which are insufficient for capturing the complexity of such problems.To address this limitation,we introduce MDMOSA(Multi-objective Dwarf Mongoose Optimization with Simulated Annealing),a hybrid that integrates multi-objective optimization for efficient task scheduling in Infrastructure-as-a-Service(IaaS)cloud environments.MDMOSA harmonizes the exploration capabilities of the biologically inspired Dwarf Mongoose Optimization(DMO)with the exploitation strengths of Simulated Annealing(SA),achieving a balanced search process.The algorithm aims to optimize task allocation by reducing makespan and financial cost while improving system resource utilization.We evaluate MDMOSA through extensive simulations using the real-world Google Cloud Jobs(GoCJ)dataset within the CloudSim environment.Comparative analysis against benchmarked algorithms such as SMOACO,MOTSGWO,and MFPAGWO reveals that MDMOSA consistently achieves superior performance in terms of scheduling efficiency,cost-effectiveness,and scalability.These results confirm the potential of MDMOSA as a robust and adaptable solution for resource scheduling in dynamic and heterogeneous cloud computing infrastructures.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
基金supported by the National Natural Science Foundation of China under Grant No.61972040the Science and Technology Research and Development Project funded by China Railway Material Trade Group Luban Company.
文摘In a wide range of engineering applications,complex constrained multi-objective optimization problems(CMOPs)present significant challenges,as the complexity of constraints often hampers algorithmic convergence and reduces population diversity.To address these challenges,we propose a novel algorithm named Constraint IntensityDriven Evolutionary Multitasking(CIDEMT),which employs a two-stage,tri-task framework to dynamically integrates problem structure and knowledge transfer.In the first stage,three cooperative tasks are designed to explore the Constrained Pareto Front(CPF),the Unconstrained Pareto Front(UPF),and theε-relaxed constraint boundary,respectively.A CPF-UPF relationship classifier is employed to construct a problem-type-aware evolutionary strategy pool.At the end of the first stage,each task selects strategies from this strategy pool based on the specific type of problem,thereby guiding the subsequent evolutionary process.In the second stage,while each task continues to evolve,aτ-driven knowledge transfer mechanism is introduced to selectively incorporate effective solutions across tasks.enhancing the convergence and feasibility of the main task.Extensive experiments conducted on 32 benchmark problems from three test suites(LIRCMOP,DASCMOP,and DOC)demonstrate that CIDEMT achieves the best Inverted Generational Distance(IGD)values on 24 problems and the best Hypervolume values(HV)on 22 problems.Furthermore,CIDEMT significantly outperforms six state-of-the-art constrained multi-objective evolutionary algorithms(CMOEAs).These results confirm CIDEMT’s superiority in promoting convergence,diversity,and robustness in solving complex CMOPs.
基金sponsored by R&D Program of Beijing Municipal Education Commission(KM202410009013).
文摘In the independent electro-hydrogen system(IEHS)with hybrid energy storage(HESS),achieving optimal scheduling is crucial.Still,it presents a challenge due to the significant deviations in values ofmultiple optimization objective functions caused by their physical dimensions.These deviations seriously affect the scheduling process.A novel standardization fusion method has been established to address this issue by analyzing the variation process of each objective function’s values.The optimal scheduling results of IEHS with HESS indicate that the economy and overall energy loss can be improved 2–3 times under different optimization methods.The proposed method better balances all optimization objective functions and reduces the impact of their dimensionality.When the cost of BESS decreases by approximately 30%,its participation deepens by about 1 time.Moreover,if the price of the electrolyzer is less than 15¥/kWh or if the cost of the fuel cell drops below 4¥/kWh,their participation will increase substantially.This study aims to provide a more reasonable approach to solving multi-objective optimization problems.
文摘Community detection is one of the most fundamental applications in understanding the structure of complicated networks.Furthermore,it is an important approach to identifying closely linked clusters of nodes that may represent underlying patterns and relationships.Networking structures are highly sensitive in social networks,requiring advanced techniques to accurately identify the structure of these communities.Most conventional algorithms for detecting communities perform inadequately with complicated networks.In addition,they miss out on accurately identifying clusters.Since single-objective optimization cannot always generate accurate and comprehensive results,as multi-objective optimization can.Therefore,we utilized two objective functions that enable strong connections between communities and weak connections between them.In this study,we utilized the intra function,which has proven effective in state-of-the-art research studies.We proposed a new inter-function that has demonstrated its effectiveness by making the objective of detecting external connections between communities is to make them more distinct and sparse.Furthermore,we proposed a Multi-Objective community strength enhancement algorithm(MOCSE).The proposed algorithm is based on the framework of the Multi-Objective Evolutionary Algorithm with Decomposition(MOEA/D),integrated with a new heuristic mutation strategy,community strength enhancement(CSE).The results demonstrate that the model is effective in accurately identifying community structures while also being computationally efficient.The performance measures used to evaluate the MOEA/D algorithm in our work are normalized mutual information(NMI)and modularity(Q).It was tested using five state-of-the-art algorithms on social networks,comprising real datasets(Zachary,Dolphin,Football,Krebs,SFI,Jazz,and Netscience),as well as twenty synthetic datasets.These results provide the robustness and practical value of the proposed algorithm in multi-objective community identification.
基金supported by the National Research Foundation of Korea grant funded by the Korea government(RS-2023-00217116)。
文摘Federated learning is a distributed framework that trains a centralised model using data from multiple clients without transferring that data to a central server.Despite rapid progress,federated learning still faces several unsolved challenges.Specifically,communication costs and system heterogeneity,such as nonidentical data distribution,hinder federated learning's progress.Several approaches have recently emerged for federated learning involving heterogeneous clients with varying computational capabilities(namely,heterogeneous federated learning).However,heterogeneous federated learning faces two key challenges:optimising model size and determining client selection ratios.Moreover,efficiently aggregating local models from clients with diverse capabilities is crucial for addressing system heterogeneity and communication efficiency.This paper proposes an evolutionary multiobjective optimisation framework for heterogeneous federated learning(MOHFL)to address these issues.Our approach elegantly formulates and solves a biobjective optimisation problem that minimises communication cost and model error rate.The decision variables in this framework comprise model sizes and client selection ratios for each Q client cluster,yielding a total of 2×Q optimisation parameters to be tuned.We develop a partition-based strategy for MOHFL that segregates clients into clusters based on their communication and computation capabilities.Additionally,we implement an adaptive model sizing mechanism that dynamically assigns appropriate subnetwork architectures to clients based on their computational constraints.We also propose a unified aggregation framework to combine models of varying sizes from heterogeneous clients effectively.Extensive experiments on multiple datasets demonstrate the effectiveness and superiority of our proposed method compared to existing approaches.
基金National Natural Science Foundation of China(52175237)。
文摘The key parameters that characterize the morphological quality of multi-layer and multi-pass metal laser deposited parts are the surface roughness and the error between the actual printing height and the theoretical model height.The Taguchi method was employed to establish the correlations between process parameter combinations and multi-objective characterization of metal deposition morphology(height error and roughness).Results show that using the signal-to-noise ratio and grey relational analysis,the optimal parameter combination for multi-layer and multi-pass deposition is determined as follows:laser power of 800 W,powder feeding rate of 0.3 r/min,step distance of 1.6 mm,and scanning speed of 20 mm/s.Subsequently,a Genetic Bayesian-back propagation(GB-BP)network is constructed to predict multi-objective responses.Compared with the traditional back propagation network,the GB-back propagation network improves the prediction accuracy of height error and surface roughness by 43.14%and 71.43%,respectively.This network can accurately predict the multi-objective characterization of morphological quality of multi-layer and multi-pass metal deposited parts.
基金supported by Key Science and Technology Program of Henan Province,China(Grant Nos.242102210147,242102210027)Fujian Province Young and Middle aged Teacher Education Research Project(Science and Technology Category)(No.JZ240101)(Corresponding author:Dong Yuan).
文摘Vehicle Edge Computing(VEC)and Cloud Computing(CC)significantly enhance the processing efficiency of delay-sensitive and computation-intensive applications by offloading compute-intensive tasks from resource-constrained onboard devices to nearby Roadside Unit(RSU),thereby achieving lower delay and energy consumption.However,due to the limited storage capacity and energy budget of RSUs,it is challenging to meet the demands of the highly dynamic Internet of Vehicles(IoV)environment.Therefore,determining reasonable service caching and computation offloading strategies is crucial.To address this,this paper proposes a joint service caching scheme for cloud-edge collaborative IoV computation offloading.By modeling the dynamic optimization problem using Markov Decision Processes(MDP),the scheme jointly optimizes task delay,energy consumption,load balancing,and privacy entropy to achieve better quality of service.Additionally,a dynamic adaptive multi-objective deep reinforcement learning algorithm is proposed.Each Double Deep Q-Network(DDQN)agent obtains rewards for different objectives based on distinct reward functions and dynamically updates the objective weights by learning the value changes between objectives using Radial Basis Function Networks(RBFN),thereby efficiently approximating the Pareto-optimal decisions for multiple objectives.Extensive experiments demonstrate that the proposed algorithm can better coordinate the three-tier computing resources of cloud,edge,and vehicles.Compared to existing algorithms,the proposed method reduces task delay and energy consumption by 10.64%and 5.1%,respectively.
基金National Natural Science Foundation of China,No.42301470,No.52270185,No.42171389Capacity Building Program of Local Colleges and Universities in Shanghai,No.21010503300。
文摘Rapid urbanization in China has led to spatial antagonism between urban development and farmland protection and ecological security maintenance.Multi-objective spatial collaborative optimization is a powerful method for achieving sustainable regional development.Previous studies on multi-objective spatial optimization do not involve spatial corrections to simulation results based on the natural endowment of space resources.This study proposes an Ecological Security-Food Security-Urban Sustainable Development(ES-FS-USD)spatial optimization framework.This framework combines the non-dominated sorting genetic algorithm II(NSGA-II)and patch-generating land use simulation(PLUS)model with an ecological protection importance evaluation,comprehensive agricultural productivity evaluation,and urban sustainable development potential assessment and optimizes the territorial space in the Yangtze River Delta(YRD)region in 2035.The proposed sustainable development(SD)scenario can effectively reduce the destruction of landscape patterns of various land-use types while considering both ecological and economic benefits.The simulation results were further revised by evaluating the land-use suitability of the YRD region.According to the revised spatial pattern for the YRD in 2035,the farmland area accounts for 43.59%of the total YRD,which is 5.35%less than that in 2010.Forest,grassland,and water area account for 40.46%of the total YRD—an increase of 1.42%compared with the case in 2010.Construction land accounts for 14.72%of the total YRD—an increase of 2.77%compared with the case in 2010.The ES-FS-USD spatial optimization framework ensures that spatial optimization outcomes are aligned with the natural endowments of land resources,thereby promoting the sustainable use of land resources,improving the ability of spatial management,and providing valuable insights for decision makers.
基金supported by the National Science and Technology Council,Taiwan,under Grants 113-2221-E-260-014-MY2 and 114-2119-M-033-001.
文摘The rapid growth of mobile and Internet of Things(IoT)applications in dense urban environments places stringent demands on future Beyond 5G(B5G)or Beyond 6G(B6G)networks,which must ensure high Quality of Service(QoS)while maintaining cost-efficiency and sustainable deployment.Traditional strategies struggle with complex 3D propagation,building penetration loss,and the balance between coverage and infrastructure cost.To address this challenge,this study presents the first application of a Global-best Guided Quantum-inspired Tabu Search with Quantum-Not Gate(GQTS-QNG)framework for 3D base-station deployment optimization.The problem is formulated as a multi-objective model that simultaneously maximizes coverage and minimizes deployment cost.A binary-to-decimal encodingmechanism is designed to represent discrete placement coordinates and base station types,leveraging a quantum-inspired method to efficiently search and refine solutions within challenging combinatorial environments.Global-best guidance and tabu memory are integrated to strengthen convergence stability and avoid revisiting previously explored solutions.Simulation results across user densities ranging from 1000 to 10,000 show that GQTS-QNG consistently finds deployment configurations achieving full coverage while reducing deployment cost compared with the state-of-the-art algorithms under equal iteration times.Additionally,our method generates welldistributed and structured Pareto fronts,offering diverse planning options that allow operators to flexibly balance cost and performance requirements.These findings demonstrate that GQTS-QNG is a scalable and efficient algorithm for sustainable 3D cellular network deployment in B5G/6G urban scenarios.
文摘Impinging jet arrays are extensively used in numerous industrial operations,including the cooling of electronics,turbine blades,and other high-heat flux systems because of their superior heat transfer capabilities.Optimizing the design and operating parameters of such systems is essential to enhance cooling efficiency and achieve uniform pressure distribution,which can lead to improved system performance and energy savings.This paper presents two multi-objective optimization methodologies for a turbulent air jet impingement cooling system.The governing equations are resolved employing the commercial computational fluid dynamics(CFD)software ANSYS Fluent v17.The study focuses on four controlling parameters:Reynolds number(Re),swirl number(S),jet-to-jet separation distance(Z/D),and impingement height(H/D).The effects of these parameters on heat transfer and impingement pressure distribution are investigated.Non-dominated Sorting Genetic Algorithm(NSGA-II)and Weighted Sum Method(WSM)are employed to optimize the controlling parameters for maximum cooling performance.The aim is to identify optimal design parameters and system configurations that enhance heat transfer efficiency while achieving a uniform impingement pressure distribution.These findings have practical implications for applications requiring efficient cooling.The optimized design achieved a 12.28%increase in convective heat transfer efficiency with a local Nusselt number of 113.05 compared to 100.69 in the reference design.Enhanced convective cooling and heat flux were observed in the optimized configuration,particularly in areas of direct jet impingement.Additionally,the optimized design maintained lower wall temperatures,demonstrating more effective thermal dissipation.
基金supported by the Jiangxi Provincial Natural Science Foundation(No.20224BAB212022)Science and Technology Project of Education Department of Jiangxi Province(No.GJJ211435)+3 种基金the National Key Research and Development Program of China(No.2021YFA1400204)the Project of China Postdoctoral Science Foundation(No.2022M712909)the Natural Science Foundation of China(No.21603109)the Henan Joint Fund of the National Natural Science Foundation of China(No.U1404216)。
文摘Cobalt phosphide has been successfully used as a catalyst in the production of ammonia from nitric acid.Substituting appropriate atoms is expected to further improve its catalytic performance.Owing to the diversity of substituting elements,substitution sites,adsorption sites,and adsorption configurations,extensive time-consuming simulation calculations are required for the high-throughput screening method.Additionally,multi-objective attributes should be considered simultaneously in catalytic design.To tackle this challenge,this paper suggests a multi-objective cobalt phosphide catalytic material design method based on surrogate models.And the effectiveness of the proposed method was validated through comparative experiments.The proposed method led to the discovery of fifteen promising cobalt phosphide catalyst configurations.This study provides a new avenue for expediting the design of catalyst,with the potential for application in other systems.
基金supported by the National Key Research and Development Program Project(No.2021YFB3301300).
文摘Intelligent production is an important development direction in intelligent manufacturing,with intelligent factories playing a crucial role in promoting intelligent production.Flexible job shops,as the main form of intelligent factories,constantly face dynamic disturbances during the production process,including machine failures and urgent orders.This paper discusses the basic models and research methods of job shop scheduling,emphasizing the important role of dynamic job shop scheduling and its response schemes in future research.A multi-objective flexible job shop dynamic scheduling mathematical model is established,highlighting its complex and multi-constraint characteristics under different interferences.A classification discussion is conducted on the dynamic response methods and optimization objectives under machine failures,emergency orders,fuzzy completion times,and mixed dynamic events.The development process of traditional scheduling rules and intelligent methods in dynamic scheduling are also analyzed.Finally,based on the current development status of job shop scheduling and the requirements of intelligent manufacturing,the future development trends of dynamic scheduling in flexible job shops are proposed.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金supported by the Natural Science Foundation of Hubei Province(No.2024AFB826)the National Natural Science Foundation of China(No.52472329)the Research Project of Philosophy and Social Sciences of Hubei Provincial Education Department(No.22Y030).
文摘To expedite the large-scale deployment of driverless taxis and advance the autonomous driving industry,research on the location of integrated parking and charging facilities for driverless taxis has emerged as a significant issue in urban traffic.This study employs a progressive"preliminary selection-screening-optimal selection"approach for site selec-tion.First,the preliminary selection of parking sites is conducted by clustering various point-of-interest types.Subsequently,a multi-objective site selection model is developed to maximize the coverage of demand points,minimize construction costs,address the lar-gest population demands,and minimize the distance between demand points and candi-date sites.The non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ)is adopted to obtain several Pareto optimal solutions.The evaluation indexes are selected according to opera-tors,users,and the public transport system to estimate the Pareto optimal solutions,and then the final location solution can be obtained.The calculation methods for several key parameters are improved during the modeling process.Location potential and location influence coefficient are selected to adjust the number of driverless taxi parking spaces.Additionally,isochrones drawn based on the actual road network and path planning repre-sent the service range of candidate points.Meanwhile,distance based on actual road net-work rather than Euclidean distance is introduced to calculate the distance between candidate points.Finally,a case study shows that the method proposed in this study could reduce the total initial travel time to reach the demand points by 64%,which is indepen-dent of operational scheduling.
基金funded by National Nature Science Foundation of China(92266203)National Nature Science Foundation of China(52205278)+1 种基金Key Projects of Shijiazhuang Basic Research Program(241791077A)Central Guide Local Science and Technology Development Fund Project of Hebei Province(246Z1022G).
文摘In this paper,a topology optimization method for coordinated stiffness and strength design is proposed under mass constraints,utilizing the Solid Isotropic Material with Penalization approach.Element densities are regulated through sensitivity filtering tomitigate numerical instabilities associatedwith stress concentrations.Ap-norm aggregation function is employed to globalize local stress constraints,and a normalization technique linearly weights strain energy and stress,transforming the multi-objective problem into a single-objective formulation.The sensitivity of the objective function with respect to design variables is rigorously derived.Three numerical examples are presented,comparing the optimized structures in terms of strain energy,mass,and stress across five different mathematical models with varying combinations of optimization objectives.The results validate the effectiveness and feasibility of the proposed method for achieving a balanced design between structural stiffness and strength.This approach offers a new perspective for future research on stiffness-strength coordinated structural optimization.
基金co-supported by the National Natural Science Foundation of China(Nos.52405293,52375237)China Postdoctoral Science Foundation(No.2024M754219)Shaanxi Province Postdoctoral Research Project Funding,China。
文摘To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise modeling strategy,cell array operation principle,and Copula theory.Under this framework,we propose a DSM-based Enhanced Kriging(DSMEK)algorithm to synchronously derive the modeling of multi-objective,and explore an adaptive Copula function approach to analyze the correlation among multiple objectives and to assess the synthetical reliability level.In the proposed DSMEK and adaptive Copula methods,the Kriging model is treated as the basis function of DSMEK model,the Multi-Objective Snake Optimizer(MOSO)algorithm is used to search the optimal values of hyperparameters of basis functions,the cell array operation principle is adopted to establish a whole model of multiple objectives,the goodness of fit is utilized to determine the forms of Copula functions,and the determined Copula functions are employed to perform the reliability analyses of the correlation of multi-analytical objectives.Furthermore,three examples,including multi-objective complex function approximation,aeroengine turbine bladeddisc multi-failure mode reliability analyses and aircraft landing gear system brake temperature reliability analyses,are performed to verify the effectiveness of the proposed methods,from the viewpoints of mathematics and engineering.The results show that the DSMEK and adaptive Copula approaches hold obvious advantages in terms of modeling features and simulation performance.The efforts of this work provide a useful way for the modeling of multi-analytical objectives and synthetical reliability analyses of complex structure/system with multi-output responses.
文摘The uniform design and response surface methodology （RSM） are applied to the multi-objective optimization of a 2-D mixed compression scramjet inlet. The set of experimental design points on the design space is selected by the uniform design, and the inlet performance is analyzed by computational fluid dynamics （CFD）. Then complete quadratic polynomial response surface approximation models are constructed based on the performance analysis results and then used to replace theoriginal complex inlet performance model. The optimization is conducted using a multi-objective genetic algorithm NSGA-Ⅱ, and the Pareto optimal solution set is obtained. Results show that the uniform design and RSM can reduce the computational complexity of numerical simulation and improve the optimization efficiency.
