Wireless Sensor Network(WSNs)consists of a group of nodes that analyze the information from surrounding regions.The sensor nodes are responsible for accumulating and exchanging information.Generally,node local-ization...Wireless Sensor Network(WSNs)consists of a group of nodes that analyze the information from surrounding regions.The sensor nodes are responsible for accumulating and exchanging information.Generally,node local-ization is the process of identifying the target node’s location.In this research work,a Received Signal Strength Indicator(RSSI)-based optimal node localization approach is proposed to solve the complexities in the conventional node localization models.Initially,the RSSI value is identified using the Deep Neural Network(DNN).The RSSI is conceded as the range-based method and it does not require special hardware for the node localization process,also it consumes a very minimal amount of cost for localizing the nodes in 3D WSN.The position of the anchor nodes is fixed for detecting the location of the target.Further,the optimal position of the target node is identified using Hybrid T cell Immune with Lotus Effect Optimization algorithm(HTCI-LEO).During the node localization process,the average localization error is minimized,which is the objective of the optimal node localization.In the regular and irregular surfaces,this hybrid algorithm effectively performs the localization process.The suggested hybrid algorithm converges very fast in the three-dimensional(3D)environment.The accuracy of the proposed node localization process is 94.25%.展开更多
Wireless sensor nodes have the advantage of being low-cost,easily deployed and of good mobility.If deployed in an underground mine with existing underground transmission systems a wireless sensor network can improve t...Wireless sensor nodes have the advantage of being low-cost,easily deployed and of good mobility.If deployed in an underground mine with existing underground transmission systems a wireless sensor network can improve the collection of information.To get good transmission performance for 2.4 GHz wireless sensor nodes at the working face we calculated the reflection properties of electromagnetic waves from a flat metal plate.Using the cascade impedance method(CIM),we studied transmission attenuation and compared the results to actual tests.The results show that the effective transmission distance of 2.4 GHz wireless sensor nodes meets the stipulations of the ZigBee protocol.展开更多
The wireless sensor network （WSN） consists of sensor nodes that interact with each other to collectively monitor environmental or physical conditions at different locations for the intended users. One of its potenti...The wireless sensor network （WSN） consists of sensor nodes that interact with each other to collectively monitor environmental or physical conditions at different locations for the intended users. One of its potential deployments is in the form of smart home and ambient assisted living （SHAAL）to measure patients or elderly physiological signals, control home appliances, and monitor home. This paper focuses on the development of a wireless sensor node platform for SHAAL application over WSN which complies with the IEEE 802.15.4 standard and operates in 2.4 GHz ISM （industrial, scientific, and medical） band. The initial stage of SHAAL application development is the design of the wireless sensor node named TelG mote. The main features of TelG mote contributing to the green communications include low power consumption, wearable, flexible, user-friendly, and small sizes. It is then embedded with a self-built operating system named WiseOS to support customized operation. The node can achieve a packet reception rate （PRR） above 80% for a distance of up to 8 m. The designed TelG mote is also comparable with the existing wireless sensor nodes available in the market.展开更多
The rapid expansion of Internet of Things(IoT)devices deploys various sensors in different applications like homes,cities and offices.IoT applications depend upon the accuracy of sensor data.So,it is necessary to pred...The rapid expansion of Internet of Things(IoT)devices deploys various sensors in different applications like homes,cities and offices.IoT applications depend upon the accuracy of sensor data.So,it is necessary to predict faults in the sensor and isolate their cause.A novel primitive technique named fall curve is presented in this paper which characterizes sensor faults.This technique identifies the faulty sensor and determines the correct working of the sensor.Different sources of sensor faults are explained in detail whereas various faults that occurred in sensor nodes available in IoT devices are also presented in tabular form.Fault prediction in digital and analog sensors along with methods of sensor fault prediction are described.There are several advantages and disadvantages of sensor fault prediction methods and the fall curve technique.So,some solutions are provided to overcome the limitations of the fall curve technique.In this paper,a bibliometric analysis is carried out to visually analyze 63 papers fetched from the Scopus database for the past five years.Its novelty is to predict a fault before its occurrence by looking at the fall curve.The sensing of current flow in devices is important to prevent a major loss.So,the fall curves of ACS712 current sensors configured on different devices are drawn for predicting faulty or non-faulty devices.The analysis result proved that if any of the current sensors gets faulty,then the fall curve will differ and the value will immediately drop to zero.Various evaluation metrics for fault prediction are also described in this paper.At last,this paper also addresses some possible open research issues which are important to deal with false IoT sensor data.展开更多
With the requirements of multimedia service increasing in people＇ s life, sensor modules such as microphone, camera are added in the smart home＇ s sensor network, and the acquisition and processing of a large amount...With the requirements of multimedia service increasing in people＇ s life, sensor modules such as microphone, camera are added in the smart home＇ s sensor network, and the acquisition and processing of a large amount of information media such as audio, image and video is becoming a significant characteristics of smart home. The paper focuses on solving the following technical problems： the building of Zigbee multimedia network, the Design and selection of multimedia sensor node. These provide the basic network platform and the core technical support for the building of smart home.展开更多
Wireless sensor networks are extremely vulnerable to various security threats.The intrusion detection method based on game theory can effectively balance the detection rate and energy consumption of the system.The acc...Wireless sensor networks are extremely vulnerable to various security threats.The intrusion detection method based on game theory can effectively balance the detection rate and energy consumption of the system.The accurate analysis of the attack behavior of malicious sensor nodes can help to configure intrusion detection system,reduce unnecessary system consumption and improve detection efficiency.However,the completely rational assumption of the traditional game model will cause the established model to be inconsistent with the actual attack and defense scenario.In order to formulate a reasonable and effective intrusion detection strategy,we introduce evolutionary game theory to establish an attack evolution game model based on optimal response dynamics,and then analyze the attack behavior of malicious sensor nodes.Theoretical analysis and simulation results show that the evolution trend of attacks is closely related to the number of malicious sensors in the network and the initial state of the strategy,and the attacker can set the initial strategy so that all malicious sensor nodes will eventually launch attacks.Our work is of great significance to guide the development of defense strategies for intrusion detection systems.展开更多
Usefulness of sensor network applications in human life is increasing day by day and the concept of wireless connection promises new application areas. Sensor network can be very beneficial in saving human life from t...Usefulness of sensor network applications in human life is increasing day by day and the concept of wireless connection promises new application areas. Sensor network can be very beneficial in saving human life from terrorist attacks causing explosion in certain areas leading to casualties. But realization of the sensor network application in explosive detection requires high scalability of the sensor network and fast transmission of the information through real time monitoring and control. In this paper a novel mechanism for explosive trace detection in any populated area by the use of mobile telephony has been described. The aim is to create a system that will assure common men, local population and above all the nation a secured environment, without disturbing their freedom of movement. It would further help the police in detection of explosives more quickly, isolation of suicide bombers, remediation of explosives manufacturing sites, and forensic and criminal investigation. To achieve this, the paper has projected an idea that can combine the strength of the mobile phones, the polymer sensor and existing cellular network. The idea is to design and embed a tiny cog-nitive radio sensor node into the mobile phone that adapts to the changing environment by analyzing the RF surroundings and adjusting the spectrum use appropriately. The system would be capable of detecting explo-sives within a defined territory. It would communicate the location of the detected explosives to the respec-tive service provider, which in turn would inform the law and enforcement agency or Police.展开更多
With reference to sensor node architectures, we consider the problem of supporting forms of memory protection through a hardware/compiler approach that takes advantage of a low-cost protection circuitry inside the mic...With reference to sensor node architectures, we consider the problem of supporting forms of memory protection through a hardware/compiler approach that takes advantage of a low-cost protection circuitry inside the microcontroller, interposed between the processor and the storage devices. Our design effort complies with the stringent limitations existing in these architectures in terms of hardware complexity, available storage and energy consumption. Rather that precluding deliberately harmful programs from producing their effects, our solution is aimed at limiting the spread of programming errors outside the memory scope of the running program. The discussion evaluates the resulting protection environment from a number of salient viewpoints that include the implementation of common protection paradigms, efficiency in the distribution and revocation of access privileges, and the lack of a privileged (kernel) mode.展开更多
This paper focuses on the key issues of information processing in the new sensing technology-electromagnetic induction tomography and depth theoretical study and experimental simulation have been conducted.In this stu...This paper focuses on the key issues of information processing in the new sensing technology-electromagnetic induction tomography and depth theoretical study and experimental simulation have been conducted.In this study,Labview is used to drive the data acquisition card to control the signal generation and acquisition,and Matlab is used to achieve algorithms such as Fast Fourier Transformation (FFT) algorithm,relevant law algorithm and the classical method algorithm.The simulation results show this software system enables successful digital phase identification and the phase difference resolution of 0.10 can be achieved,which is consistent with theoretical analysis.It can also be seen that software system based on Labview and Matlab is a successful method to identify the phase difference in magnetic induction tomography system,which can meet the measurement needs of sensor nodes,laying the basis for the further development of medical IoT study.展开更多
Sensor networks are regularly sent to monitor certain physical properties that run in length from divisions of a second to many months or indeed several years.Nodes must advance their energy use for expanding network ...Sensor networks are regularly sent to monitor certain physical properties that run in length from divisions of a second to many months or indeed several years.Nodes must advance their energy use for expanding network lifetime.The fault detection of the network node is very significant for guaranteeing the correctness of monitoring results.Due to different network resource constraints and malicious attacks,security assurance in wireless sensor networks has been a difficult task.The implementation of these features requires larger space due to distributed module.This research work proposes new sensor node architecture integrated with a self-testing core and cryptoprocessor to provide fault-free operation and secured data transmission.The proposed node architecture was designed using Verilog programming and implemented using the Xilinx ISE tool in the Spartan 3E environment.The proposed system supports the real-time application in the range of 33 nanoseconds.The obtained results have been compared with the existing Microcontroller-based system.The power consumption of the proposed system consumes only 3.9 mW,and it is only 24%percentage of AT mega-based node architecture.展开更多
Predictive maintenance is a vital aspect of the industrial sector,and the use of Industrial Internet of Things(IIoT)sensor nodes is becoming increasingly popular for detecting motor faults and monitoring motor conditi...Predictive maintenance is a vital aspect of the industrial sector,and the use of Industrial Internet of Things(IIoT)sensor nodes is becoming increasingly popular for detecting motor faults and monitoring motor conditions.An integrated approach for acquiring,processing,and wirelessly transmitting a large amount of data in predictive maintenance applications remains a significant challenge.This study presents an IIoT-based sensor node for industrial motors.The sensor node is designed to acquire vibration data on the radial and axial axes of the motor and utilizes a hybrid approach for efficient data processing via edge and cloud platforms.The initial step of signal processing is performed on the node at the edge,reducing the burden on a centralized cloud for processing data from multiple sensors.The proposed architecture utilizes the lightweight Message Queue Telemetry Transport(MQTT)communication protocol for seamless data transmission from the node to the local and main brokers.The broker’s bridging allows for data backup in case of connection loss.The proposed sensor node is rigorously tested on a motor testbed in a laboratory setup and an industrial setting in a rice industry for validation,ensuring its performance and accuracy in real-world industrial environments.The data analysis and results from both testbed and industrial motors were discussed using vibration analysis for identifying faults.The proposed sensor node is a significant step towards improving the efficiency and reliability of industrial motors through realtime monitoring and early fault detection,ultimately leading to minimized unscheduled downtime and cost savings.展开更多
We report a novel battery-less wireless current sensor node without an analog to digital converter (ADC). If a capacitor is charged using a current transformer (CT) and a rectifying circuit, the charging time depends ...We report a novel battery-less wireless current sensor node without an analog to digital converter (ADC). If a capacitor is charged using a current transformer (CT) and a rectifying circuit, the charging time depends on the current flowing through a power line. In the case that the node transmits data every time when voltage of the capacitor exceeds a threshold voltage, we can indirectly measure the current by measuring the transmission intervals. In this method, the circuit of the node can be simplified and power consumption for the wireless transmission can be decreased because the measured current data does not need to be included in the transmitted packet. However, the measurable range is about single digit because the transmission interval decreases suddenly as the current increases. In this work, we have ex- panded the range using one CT, one wireless transmission module, and two charging circuits that include different load resistors connected in series. The results indicated that the measurable range was from 0.5 A to 50 A.展开更多
The wireless sensor network (WSN) is one of the budding exploring areas and fast rising fields in wireless communications. The sensor nodes in the network are generally small-size, low-cost, low-power and multi-functi...The wireless sensor network (WSN) is one of the budding exploring areas and fast rising fields in wireless communications. The sensor nodes in the network are generally small-size, low-cost, low-power and multi-function capabilities. Wireless sensor networks (WSNs) are used for various applications;since numerous sensor nodes are usually deployed on remote and inaccessible places, the employment and preservation should be easy and scalable. Sensor nodes in the field being run out of energy quickly has been an issue and many energy efficient routing protocols have been proposed to solve this problem and preserve the long life of the network. This paper work proposes a hierarchical based node activation routing technique which shows energy efficiency. This technique selects cluster head with highest residual energy in each communication round of transmission to the base station from the cluster heads. Hierarchical based node activation routing technique with different levels of hierarchy simulation results prolongs the lifetime of the network compared to other clustering schemes and communication rounds of simulation increase significantly.展开更多
Advancing technology has enabled the production of smaller, more energy efficient and cheaper electronic components. Therefore, previously existing many computer and electronics science-engineering ideas have become f...Advancing technology has enabled the production of smaller, more energy efficient and cheaper electronic components. Therefore, previously existing many computer and electronics science-engineering ideas have become feasible. One of them is the technology of wireless sensor networks (WSNs), which has become the realization of the necessary technical requirements applicable today with low energy consumption. First, the sensing tasks and the potential sensor networks applications have explored, and reviews of factors influencing the design of sensor networks have provided. Then, the communication architectures for sensor networks have been outlined. PIC-based microcontrollers have used in the design of the sensor nodes. The design of the sensor node has supported with ultra-low power nanowatt technology for very low-cost design. Processing, memory and wireless communication units have integrated on to the sensor nodes and sensors to be used in the designed system which have allowed to be connected to any kind of sensor node. The designed sensor node’s operating system has written with the PIC C language, and PIC operating system has allowed different features such as measuring humidity, temperature, light sensitive and smoke sensor. Computer software has developed for data that can be recorded and monitored from a central location. Decision-making unit has created in the software algorithm and hardware modules for the implementation of decisions taken by the developed sensor nodes. Developed PIC-based sensor nodes have supported a unique voltage unit with renewable energy sources such as solar panel, rechargeable battery, and supercapacitor for energy production and saving. The results of this study are expected to be helpful for the development of WSN especially with renewable energy sources.展开更多
Background With the development of the Internet,the topology optimization of wireless sensor networks has received increasing attention.However,traditional optimization methods often overlook the energy imbalance caus...Background With the development of the Internet,the topology optimization of wireless sensor networks has received increasing attention.However,traditional optimization methods often overlook the energy imbalance caused by node loads,which affects network performance.Methods To improve the overall performance and efficiency of wireless sensor networks,a new method for optimizing the wireless sensor network topology based on K-means clustering and firefly algorithms is proposed.The K-means clustering algorithm partitions nodes by minimizing the within-cluster variance,while the firefly algorithm is an optimization algorithm based on swarm intelligence that simulates the flashing interaction between fireflies to guide the search process.The proposed method first introduces the K-means clustering algorithm to cluster nodes and then introduces a firefly algorithm to dynamically adjust the nodes.Results The results showed that the average clustering accuracies in the Wine and Iris data sets were 86.59%and 94.55%,respectively,demonstrating good clustering performance.When calculating the node mortality rate and network load balancing standard deviation,the proposed algorithm showed dead nodes at approximately 50 iterations,with an average load balancing standard deviation of 1.7×10^(4),proving its contribution to extending the network lifespan.Conclusions This demonstrates the superiority of the proposed algorithm in significantly improving the energy efficiency and load balancing of wireless sensor networks to extend the network lifespan.The research results indicate that wireless sensor networks have theoretical and practical significance in fields such as monitoring,healthcare,and agriculture.展开更多
Healthcare networks are transitioning from manual records to electronic health records,but this shift introduces vulnerabilities such as secure communication issues,privacy concerns,and the presence of malicious nodes...Healthcare networks are transitioning from manual records to electronic health records,but this shift introduces vulnerabilities such as secure communication issues,privacy concerns,and the presence of malicious nodes.Existing machine and deep learning-based anomalies detection methods often rely on centralized training,leading to reduced accuracy and potential privacy breaches.Therefore,this study proposes a Blockchain-based-Federated Learning architecture for Malicious Node Detection(BFL-MND)model.It trains models locally within healthcare clusters,sharing only model updates instead of patient data,preserving privacy and improving accuracy.Cloud and edge computing enhance the model’s scalability,while blockchain ensures secure,tamper-proof access to health data.Using the PhysioNet dataset,the proposed model achieves an accuracy of 0.95,F1 score of 0.93,precision of 0.94,and recall of 0.96,outperforming baseline models like random forest(0.88),adaptive boosting(0.90),logistic regression(0.86),perceptron(0.83),and deep neural networks(0.92).展开更多
Wireless Sensor Networks(WSNs)play a critical role in automated border surveillance systems,where continuous monitoring is essential.However,limited energy resources in sensor nodes lead to frequent network failures a...Wireless Sensor Networks(WSNs)play a critical role in automated border surveillance systems,where continuous monitoring is essential.However,limited energy resources in sensor nodes lead to frequent network failures and reduced coverage over time.To address this issue,this paper presents an innovative energy-efficient protocol based on deep Q-learning(DQN),specifically developed to prolong the operational lifespan of WSNs used in border surveillance.By harnessing the adaptive power of DQN,the proposed protocol dynamically adjusts node activity and communication patterns.This approach ensures optimal energy usage while maintaining high coverage,connectivity,and data accuracy.The proposed system is modeled with 100 sensor nodes deployed over a 1000 m×1000 m area,featuring a strategically positioned sink node.Our method outperforms traditional approaches,achieving significant enhancements in network lifetime and energy utilization.Through extensive simulations,it is observed that the network lifetime increases by 9.75%,throughput increases by 8.85%and average delay decreases by 9.45%in comparison to the similar recent protocols.It demonstrates the robustness and efficiency of our protocol in real-world scenarios,highlighting its potential to revolutionize border surveillance operations.展开更多
Wireless Sensor Networks(WSNs)have emerged as crucial tools for real-time environmental monitoring through distributed sensor nodes(SNs).However,the operational lifespan of WSNs is significantly constrained by the lim...Wireless Sensor Networks(WSNs)have emerged as crucial tools for real-time environmental monitoring through distributed sensor nodes(SNs).However,the operational lifespan of WSNs is significantly constrained by the limited energy resources of SNs.Current energy efficiency strategies,such as clustering,multi-hop routing,and data aggregation,face challenges,including uneven energy depletion,high computational demands,and suboptimal cluster head(CH)selection.To address these limitations,this paper proposes a hybrid methodology that optimizes energy consumption(EC)while maintaining network performance.The proposed approach integrates the Low Energy Adaptive Clustering Hierarchy with Deterministic(LEACH-D)protocol using an Artificial Neural Network(ANN)and Bayesian Regularization Algorithm(BRA).LEACH-D improves upon conventional LEACH by ensuring more uniform energy usage across SNs,mitigating inefficiencies from random CH selection.The ANN further enhances CH selection and routing processes,effectively reducing data transmission overhead and idle listening.Simulation results reveal that the LEACH-D-ANN model significantly reduces EC and extends the network’s lifespan compared to existing protocols.This framework offers a promising solution to the energy efficiency challenges in WSNs,paving the way for more sustainable and reliable network deployments.展开更多
Major consideration dimensions for the physical layer design of wireless sensor network （WSN） nodes is analyzed by comparing different wireless communication approaches, diverse mature standards, important radio fre...Major consideration dimensions for the physical layer design of wireless sensor network （WSN） nodes is analyzed by comparing different wireless communication approaches, diverse mature standards, important radio frequency （RF） parameters and various microcontroller unit （MCU） solutions. An implementation of the WSN node is presented with experimental results and a novel ＂one processor working at two frequencies＂ energy saving strategy. The lifetime estimation issue is analyzed with consideration to the periodical listen required by common WSN media access control （MAC） algorithms. It can be concluded that the startup time of the RF which determines the best sleep time ratio and the shortest backoff slot time of MAC, the RF frequency and modulation methods which determinate the RX and TX current, and the overall energy consumption of the dual frequency MCU SOC （ system on chip） are the most essential factors for the WSN node physical layer design.展开更多
The optimization of network performance in a movement-assisted data gathering scheme was studied by analyzing the energy consumption of wireless sensor network with node uniform distribution. A theoretically analytica...The optimization of network performance in a movement-assisted data gathering scheme was studied by analyzing the energy consumption of wireless sensor network with node uniform distribution. A theoretically analytical method for avoiding energy hole was proposed. It is proved that if the densities of sensor nodes working at the same time are alternate between dormancy and work with non-uniform node distribution. The efficiency of network can increase by several times and the residual energy of network is nearly zero when the network lifetime ends.展开更多
基金appreciation to King Saud University for funding this research through the Researchers Supporting Program number(RSPD2024R918),King Saud University,Riyadh,Saudi Arabia.
文摘Wireless Sensor Network(WSNs)consists of a group of nodes that analyze the information from surrounding regions.The sensor nodes are responsible for accumulating and exchanging information.Generally,node local-ization is the process of identifying the target node’s location.In this research work,a Received Signal Strength Indicator(RSSI)-based optimal node localization approach is proposed to solve the complexities in the conventional node localization models.Initially,the RSSI value is identified using the Deep Neural Network(DNN).The RSSI is conceded as the range-based method and it does not require special hardware for the node localization process,also it consumes a very minimal amount of cost for localizing the nodes in 3D WSN.The position of the anchor nodes is fixed for detecting the location of the target.Further,the optimal position of the target node is identified using Hybrid T cell Immune with Lotus Effect Optimization algorithm(HTCI-LEO).During the node localization process,the average localization error is minimized,which is the objective of the optimal node localization.In the regular and irregular surfaces,this hybrid algorithm effectively performs the localization process.The suggested hybrid algorithm converges very fast in the three-dimensional(3D)environment.The accuracy of the proposed node localization process is 94.25%.
基金Project 60774090 supported by the National Natural Science Foundation of China
文摘Wireless sensor nodes have the advantage of being low-cost,easily deployed and of good mobility.If deployed in an underground mine with existing underground transmission systems a wireless sensor network can improve the collection of information.To get good transmission performance for 2.4 GHz wireless sensor nodes at the working face we calculated the reflection properties of electromagnetic waves from a flat metal plate.Using the cascade impedance method(CIM),we studied transmission attenuation and compared the results to actual tests.The results show that the effective transmission distance of 2.4 GHz wireless sensor nodes meets the stipulations of the ZigBee protocol.
基金supported by the Ministry of Higher Education,Malaysia under Grant No.R.J130000.7823.4L626
文摘The wireless sensor network （WSN） consists of sensor nodes that interact with each other to collectively monitor environmental or physical conditions at different locations for the intended users. One of its potential deployments is in the form of smart home and ambient assisted living （SHAAL）to measure patients or elderly physiological signals, control home appliances, and monitor home. This paper focuses on the development of a wireless sensor node platform for SHAAL application over WSN which complies with the IEEE 802.15.4 standard and operates in 2.4 GHz ISM （industrial, scientific, and medical） band. The initial stage of SHAAL application development is the design of the wireless sensor node named TelG mote. The main features of TelG mote contributing to the green communications include low power consumption, wearable, flexible, user-friendly, and small sizes. It is then embedded with a self-built operating system named WiseOS to support customized operation. The node can achieve a packet reception rate （PRR） above 80% for a distance of up to 8 m. The designed TelG mote is also comparable with the existing wireless sensor nodes available in the market.
基金supported by Taif University Researchers supporting Project number(TURSP-2020/347),Taif University,Taif,Saudi Arabia.
文摘The rapid expansion of Internet of Things(IoT)devices deploys various sensors in different applications like homes,cities and offices.IoT applications depend upon the accuracy of sensor data.So,it is necessary to predict faults in the sensor and isolate their cause.A novel primitive technique named fall curve is presented in this paper which characterizes sensor faults.This technique identifies the faulty sensor and determines the correct working of the sensor.Different sources of sensor faults are explained in detail whereas various faults that occurred in sensor nodes available in IoT devices are also presented in tabular form.Fault prediction in digital and analog sensors along with methods of sensor fault prediction are described.There are several advantages and disadvantages of sensor fault prediction methods and the fall curve technique.So,some solutions are provided to overcome the limitations of the fall curve technique.In this paper,a bibliometric analysis is carried out to visually analyze 63 papers fetched from the Scopus database for the past five years.Its novelty is to predict a fault before its occurrence by looking at the fall curve.The sensing of current flow in devices is important to prevent a major loss.So,the fall curves of ACS712 current sensors configured on different devices are drawn for predicting faulty or non-faulty devices.The analysis result proved that if any of the current sensors gets faulty,then the fall curve will differ and the value will immediately drop to zero.Various evaluation metrics for fault prediction are also described in this paper.At last,this paper also addresses some possible open research issues which are important to deal with false IoT sensor data.
文摘With the requirements of multimedia service increasing in people＇ s life, sensor modules such as microphone, camera are added in the smart home＇ s sensor network, and the acquisition and processing of a large amount of information media such as audio, image and video is becoming a significant characteristics of smart home. The paper focuses on solving the following technical problems： the building of Zigbee multimedia network, the Design and selection of multimedia sensor node. These provide the basic network platform and the core technical support for the building of smart home.
基金National Natural Science Foundation of China(No.61163009)。
文摘Wireless sensor networks are extremely vulnerable to various security threats.The intrusion detection method based on game theory can effectively balance the detection rate and energy consumption of the system.The accurate analysis of the attack behavior of malicious sensor nodes can help to configure intrusion detection system,reduce unnecessary system consumption and improve detection efficiency.However,the completely rational assumption of the traditional game model will cause the established model to be inconsistent with the actual attack and defense scenario.In order to formulate a reasonable and effective intrusion detection strategy,we introduce evolutionary game theory to establish an attack evolution game model based on optimal response dynamics,and then analyze the attack behavior of malicious sensor nodes.Theoretical analysis and simulation results show that the evolution trend of attacks is closely related to the number of malicious sensors in the network and the initial state of the strategy,and the attacker can set the initial strategy so that all malicious sensor nodes will eventually launch attacks.Our work is of great significance to guide the development of defense strategies for intrusion detection systems.
文摘Usefulness of sensor network applications in human life is increasing day by day and the concept of wireless connection promises new application areas. Sensor network can be very beneficial in saving human life from terrorist attacks causing explosion in certain areas leading to casualties. But realization of the sensor network application in explosive detection requires high scalability of the sensor network and fast transmission of the information through real time monitoring and control. In this paper a novel mechanism for explosive trace detection in any populated area by the use of mobile telephony has been described. The aim is to create a system that will assure common men, local population and above all the nation a secured environment, without disturbing their freedom of movement. It would further help the police in detection of explosives more quickly, isolation of suicide bombers, remediation of explosives manufacturing sites, and forensic and criminal investigation. To achieve this, the paper has projected an idea that can combine the strength of the mobile phones, the polymer sensor and existing cellular network. The idea is to design and embed a tiny cog-nitive radio sensor node into the mobile phone that adapts to the changing environment by analyzing the RF surroundings and adjusting the spectrum use appropriately. The system would be capable of detecting explo-sives within a defined territory. It would communicate the location of the detected explosives to the respec-tive service provider, which in turn would inform the law and enforcement agency or Police.
文摘With reference to sensor node architectures, we consider the problem of supporting forms of memory protection through a hardware/compiler approach that takes advantage of a low-cost protection circuitry inside the microcontroller, interposed between the processor and the storage devices. Our design effort complies with the stringent limitations existing in these architectures in terms of hardware complexity, available storage and energy consumption. Rather that precluding deliberately harmful programs from producing their effects, our solution is aimed at limiting the spread of programming errors outside the memory scope of the running program. The discussion evaluates the resulting protection environment from a number of salient viewpoints that include the implementation of common protection paradigms, efficiency in the distribution and revocation of access privileges, and the lack of a privileged (kernel) mode.
文摘This paper focuses on the key issues of information processing in the new sensing technology-electromagnetic induction tomography and depth theoretical study and experimental simulation have been conducted.In this study,Labview is used to drive the data acquisition card to control the signal generation and acquisition,and Matlab is used to achieve algorithms such as Fast Fourier Transformation (FFT) algorithm,relevant law algorithm and the classical method algorithm.The simulation results show this software system enables successful digital phase identification and the phase difference resolution of 0.10 can be achieved,which is consistent with theoretical analysis.It can also be seen that software system based on Labview and Matlab is a successful method to identify the phase difference in magnetic induction tomography system,which can meet the measurement needs of sensor nodes,laying the basis for the further development of medical IoT study.
文摘Sensor networks are regularly sent to monitor certain physical properties that run in length from divisions of a second to many months or indeed several years.Nodes must advance their energy use for expanding network lifetime.The fault detection of the network node is very significant for guaranteeing the correctness of monitoring results.Due to different network resource constraints and malicious attacks,security assurance in wireless sensor networks has been a difficult task.The implementation of these features requires larger space due to distributed module.This research work proposes new sensor node architecture integrated with a self-testing core and cryptoprocessor to provide fault-free operation and secured data transmission.The proposed node architecture was designed using Verilog programming and implemented using the Xilinx ISE tool in the Spartan 3E environment.The proposed system supports the real-time application in the range of 33 nanoseconds.The obtained results have been compared with the existing Microcontroller-based system.The power consumption of the proposed system consumes only 3.9 mW,and it is only 24%percentage of AT mega-based node architecture.
基金This paper is supported by the NCAIRF 079 project fund.The project is funded by National Center of Artificial Intelligence.
文摘Predictive maintenance is a vital aspect of the industrial sector,and the use of Industrial Internet of Things(IIoT)sensor nodes is becoming increasingly popular for detecting motor faults and monitoring motor conditions.An integrated approach for acquiring,processing,and wirelessly transmitting a large amount of data in predictive maintenance applications remains a significant challenge.This study presents an IIoT-based sensor node for industrial motors.The sensor node is designed to acquire vibration data on the radial and axial axes of the motor and utilizes a hybrid approach for efficient data processing via edge and cloud platforms.The initial step of signal processing is performed on the node at the edge,reducing the burden on a centralized cloud for processing data from multiple sensors.The proposed architecture utilizes the lightweight Message Queue Telemetry Transport(MQTT)communication protocol for seamless data transmission from the node to the local and main brokers.The broker’s bridging allows for data backup in case of connection loss.The proposed sensor node is rigorously tested on a motor testbed in a laboratory setup and an industrial setting in a rice industry for validation,ensuring its performance and accuracy in real-world industrial environments.The data analysis and results from both testbed and industrial motors were discussed using vibration analysis for identifying faults.The proposed sensor node is a significant step towards improving the efficiency and reliability of industrial motors through realtime monitoring and early fault detection,ultimately leading to minimized unscheduled downtime and cost savings.
文摘We report a novel battery-less wireless current sensor node without an analog to digital converter (ADC). If a capacitor is charged using a current transformer (CT) and a rectifying circuit, the charging time depends on the current flowing through a power line. In the case that the node transmits data every time when voltage of the capacitor exceeds a threshold voltage, we can indirectly measure the current by measuring the transmission intervals. In this method, the circuit of the node can be simplified and power consumption for the wireless transmission can be decreased because the measured current data does not need to be included in the transmitted packet. However, the measurable range is about single digit because the transmission interval decreases suddenly as the current increases. In this work, we have ex- panded the range using one CT, one wireless transmission module, and two charging circuits that include different load resistors connected in series. The results indicated that the measurable range was from 0.5 A to 50 A.
文摘The wireless sensor network (WSN) is one of the budding exploring areas and fast rising fields in wireless communications. The sensor nodes in the network are generally small-size, low-cost, low-power and multi-function capabilities. Wireless sensor networks (WSNs) are used for various applications;since numerous sensor nodes are usually deployed on remote and inaccessible places, the employment and preservation should be easy and scalable. Sensor nodes in the field being run out of energy quickly has been an issue and many energy efficient routing protocols have been proposed to solve this problem and preserve the long life of the network. This paper work proposes a hierarchical based node activation routing technique which shows energy efficiency. This technique selects cluster head with highest residual energy in each communication round of transmission to the base station from the cluster heads. Hierarchical based node activation routing technique with different levels of hierarchy simulation results prolongs the lifetime of the network compared to other clustering schemes and communication rounds of simulation increase significantly.
文摘Advancing technology has enabled the production of smaller, more energy efficient and cheaper electronic components. Therefore, previously existing many computer and electronics science-engineering ideas have become feasible. One of them is the technology of wireless sensor networks (WSNs), which has become the realization of the necessary technical requirements applicable today with low energy consumption. First, the sensing tasks and the potential sensor networks applications have explored, and reviews of factors influencing the design of sensor networks have provided. Then, the communication architectures for sensor networks have been outlined. PIC-based microcontrollers have used in the design of the sensor nodes. The design of the sensor node has supported with ultra-low power nanowatt technology for very low-cost design. Processing, memory and wireless communication units have integrated on to the sensor nodes and sensors to be used in the designed system which have allowed to be connected to any kind of sensor node. The designed sensor node’s operating system has written with the PIC C language, and PIC operating system has allowed different features such as measuring humidity, temperature, light sensitive and smoke sensor. Computer software has developed for data that can be recorded and monitored from a central location. Decision-making unit has created in the software algorithm and hardware modules for the implementation of decisions taken by the developed sensor nodes. Developed PIC-based sensor nodes have supported a unique voltage unit with renewable energy sources such as solar panel, rechargeable battery, and supercapacitor for energy production and saving. The results of this study are expected to be helpful for the development of WSN especially with renewable energy sources.
基金Supported by 2021 Zhanjiang University of Science and Technology"Brand Enhancement Plan"Project:Network Series Course Teaching Team(PPJH202102JXTD)2022 Zhanjiang University of Science and Technology"Brand Enhancement Plan"Project:Network Engineering(PPJHKCSZ-2022301)+1 种基金2023 Zhanjiang Science and Technology Bureau Project:Design and Simulation of Zhanjiang Mangrove Wetland Monitoring Network System(2023B01017)2022 Zhanjiang University of Science and Technology Quality Engineering Project:Audiovisual Language Teaching and Research Office(ZLGC202203).
文摘Background With the development of the Internet,the topology optimization of wireless sensor networks has received increasing attention.However,traditional optimization methods often overlook the energy imbalance caused by node loads,which affects network performance.Methods To improve the overall performance and efficiency of wireless sensor networks,a new method for optimizing the wireless sensor network topology based on K-means clustering and firefly algorithms is proposed.The K-means clustering algorithm partitions nodes by minimizing the within-cluster variance,while the firefly algorithm is an optimization algorithm based on swarm intelligence that simulates the flashing interaction between fireflies to guide the search process.The proposed method first introduces the K-means clustering algorithm to cluster nodes and then introduces a firefly algorithm to dynamically adjust the nodes.Results The results showed that the average clustering accuracies in the Wine and Iris data sets were 86.59%and 94.55%,respectively,demonstrating good clustering performance.When calculating the node mortality rate and network load balancing standard deviation,the proposed algorithm showed dead nodes at approximately 50 iterations,with an average load balancing standard deviation of 1.7×10^(4),proving its contribution to extending the network lifespan.Conclusions This demonstrates the superiority of the proposed algorithm in significantly improving the energy efficiency and load balancing of wireless sensor networks to extend the network lifespan.The research results indicate that wireless sensor networks have theoretical and practical significance in fields such as monitoring,healthcare,and agriculture.
基金funded by the Northern Border University,Arar,KSA,under the project number“NBU-FFR-2025-3555-07”.
文摘Healthcare networks are transitioning from manual records to electronic health records,but this shift introduces vulnerabilities such as secure communication issues,privacy concerns,and the presence of malicious nodes.Existing machine and deep learning-based anomalies detection methods often rely on centralized training,leading to reduced accuracy and potential privacy breaches.Therefore,this study proposes a Blockchain-based-Federated Learning architecture for Malicious Node Detection(BFL-MND)model.It trains models locally within healthcare clusters,sharing only model updates instead of patient data,preserving privacy and improving accuracy.Cloud and edge computing enhance the model’s scalability,while blockchain ensures secure,tamper-proof access to health data.Using the PhysioNet dataset,the proposed model achieves an accuracy of 0.95,F1 score of 0.93,precision of 0.94,and recall of 0.96,outperforming baseline models like random forest(0.88),adaptive boosting(0.90),logistic regression(0.86),perceptron(0.83),and deep neural networks(0.92).
基金funded by Sardar Vallabhbhai National Institute of Technology through SEED grant No.Dean(R&C)/SEED Money/2021-22/11153Date:08/02/2022supported by Business Finland EWARE-6G project under 6G Bridge program,and in part by theHorizon Europe(Smart Networks and Services Joint Under taking)program under Grant Agreement No.101096838(6G-XR project).
文摘Wireless Sensor Networks(WSNs)play a critical role in automated border surveillance systems,where continuous monitoring is essential.However,limited energy resources in sensor nodes lead to frequent network failures and reduced coverage over time.To address this issue,this paper presents an innovative energy-efficient protocol based on deep Q-learning(DQN),specifically developed to prolong the operational lifespan of WSNs used in border surveillance.By harnessing the adaptive power of DQN,the proposed protocol dynamically adjusts node activity and communication patterns.This approach ensures optimal energy usage while maintaining high coverage,connectivity,and data accuracy.The proposed system is modeled with 100 sensor nodes deployed over a 1000 m×1000 m area,featuring a strategically positioned sink node.Our method outperforms traditional approaches,achieving significant enhancements in network lifetime and energy utilization.Through extensive simulations,it is observed that the network lifetime increases by 9.75%,throughput increases by 8.85%and average delay decreases by 9.45%in comparison to the similar recent protocols.It demonstrates the robustness and efficiency of our protocol in real-world scenarios,highlighting its potential to revolutionize border surveillance operations.
文摘Wireless Sensor Networks(WSNs)have emerged as crucial tools for real-time environmental monitoring through distributed sensor nodes(SNs).However,the operational lifespan of WSNs is significantly constrained by the limited energy resources of SNs.Current energy efficiency strategies,such as clustering,multi-hop routing,and data aggregation,face challenges,including uneven energy depletion,high computational demands,and suboptimal cluster head(CH)selection.To address these limitations,this paper proposes a hybrid methodology that optimizes energy consumption(EC)while maintaining network performance.The proposed approach integrates the Low Energy Adaptive Clustering Hierarchy with Deterministic(LEACH-D)protocol using an Artificial Neural Network(ANN)and Bayesian Regularization Algorithm(BRA).LEACH-D improves upon conventional LEACH by ensuring more uniform energy usage across SNs,mitigating inefficiencies from random CH selection.The ANN further enhances CH selection and routing processes,effectively reducing data transmission overhead and idle listening.Simulation results reveal that the LEACH-D-ANN model significantly reduces EC and extends the network’s lifespan compared to existing protocols.This framework offers a promising solution to the energy efficiency challenges in WSNs,paving the way for more sustainable and reliable network deployments.
基金The National High Technology Research and Deve-lopment Program of China (863Program) (No.2003AA143040).
文摘Major consideration dimensions for the physical layer design of wireless sensor network （WSN） nodes is analyzed by comparing different wireless communication approaches, diverse mature standards, important radio frequency （RF） parameters and various microcontroller unit （MCU） solutions. An implementation of the WSN node is presented with experimental results and a novel ＂one processor working at two frequencies＂ energy saving strategy. The lifetime estimation issue is analyzed with consideration to the periodical listen required by common WSN media access control （MAC） algorithms. It can be concluded that the startup time of the RF which determines the best sleep time ratio and the shortest backoff slot time of MAC, the RF frequency and modulation methods which determinate the RX and TX current, and the overall energy consumption of the dual frequency MCU SOC （ system on chip） are the most essential factors for the WSN node physical layer design.
基金Project(60873081)supported by the National Natural Science Foundation of ChinaProject(NCET-10-0787)supported by Program for New Century Excellent Talents in UniversityProject(11JJ1012)supported by the Natural Science Foundation of Hunan Province,China
文摘The optimization of network performance in a movement-assisted data gathering scheme was studied by analyzing the energy consumption of wireless sensor network with node uniform distribution. A theoretically analytical method for avoiding energy hole was proposed. It is proved that if the densities of sensor nodes working at the same time are alternate between dormancy and work with non-uniform node distribution. The efficiency of network can increase by several times and the residual energy of network is nearly zero when the network lifetime ends.
