A multi functional wood dehumidification dryer has been developed recently. The dryer can carry out air dehumidification by using only one refrigeration system, in which heat supplying and moisture air are exhausted ...A multi functional wood dehumidification dryer has been developed recently. The dryer can carry out air dehumidification by using only one refrigeration system, in which heat supplying and moisture air are exhausted by changing the position of several air dampers. In this paper, the work principles and characteristics of the dehumidification dryer are introduced, and the testing results about the thermal engineering performance of the dehumidification dryer, as well as the experiment results of drying several species of lumbers are expounded.展开更多
Multi-functional Al-matrix composites with high volume fraction （55%-57%） of SiC particles are produced with the new pressureless infiltration fabrication technology. X-ray detection and microscopic observation disp...Multi-functional Al-matrix composites with high volume fraction （55%-57%） of SiC particles are produced with the new pressureless infiltration fabrication technology. X-ray detection and microscopic observation display the composites which are macroscopically homogeneous without porosity. The investigation further reveals that the SiC/Al composites possess low density （2.94 g/cm^3）, high elastic modulus （220 GPa）, prominent thermal management function as a result of low coefficient of thermal expansion （8 × 10^4 K^-1） and high thermal conductivity （235 W/（m.K）） as well as unique preventability of resonance vibration. By adopting a series of developed techniques, the multi-functional SiC/Al composites have managed to be made into near-net-shape parts. Many kinds of precision components of space-based optomechanical structures and airborne optoelectronic platform have been turned out. Of them, several typical products are being under test in practices.展开更多
The excessive expansion of urbanized areas has resulted in haphazard land utili- zation, immoderate consumption of superior agricultural land and water resources, significant fragmentation of agricultural landscape, a...The excessive expansion of urbanized areas has resulted in haphazard land utili- zation, immoderate consumption of superior agricultural land and water resources, significant fragmentation of agricultural landscape, and gradual deterioration of the agro-ecological en- vironment. Combined, these factors cause poor land use efficiency. Under these circum- stances, comprehensively assessing land use efficiency for urban agriculture is a key issue in land use research. Currently, evaluation methods for agricultural land use efficiency narrowly concentrate on aspects of economic input and output. However, urban agro-ecosystems can provide diverse economic, social, and ecological services and functions. In particular, the social and ecological services and functions originating from agricultural land, which have a higher value than economic services, play a significant role in ensuring regional social, eco- logical, and environmental security. However, recent research has rarely taken these benefits into consideration. Therefore, land use value has been greatly underestimated, which has resulted in mishandled and poor land use policies. In this study, we apply Landsat imagery and social and economic statistical data for the Xi＇an metropolitan zone （XMZ） to investigate agricultural multi-functionality. We develop an evaluation framework for urban agricultural land use efficiency and identify agro-ecosystem services and functions as important outputs from agricultural land. The land use efficiency of urban agriculture is then evaluated using ecosystem services models, providing a mechanism for assessing spatial-temporal changes in land use efficiency in the XMZ from 1999 to 2015. Four important conclusions are reached from this analysis. First, the rapid urbanization and agricultural transformation from traditional cereal cultivation to modern urban agriculture has resulted in steadily increasing costs, out- puts, and land use efficiency of urban agriculture. The total output value increased 41% and land use efficiency per hectare increased by 33.13% on average. Second, the spatial patterns of comprehensive output and land use efficiency were dominated by economic outputs from agricultural land. Areas near cities, which are dominated by orchard and arable land, provide more economic functions. These areas support and regulate services due to the transforma- tion from extensive cereal production to intensive modern urban agriculture; therefore, they have higher output value and land use efficiency. In contrast, areas distant from cities, towns, and high traffic roads, namely, remote rural areas, provide more support and regulating ser- vices, but have relatively lower economic function due to inaccessibility tO urban markets and slow agricultural transformation. Therefore, these areas have lower output value and land use efficiency. The spatial change in agricultural output and land use efficiency in urban areas is strongly dependent on the degree of urbanization and agricultural transformation. Third, the total output value and land use efficiency of urban agriculture measured with our approach are much higher than evaluations using traditional methods. However, the spatial patterns measured using the two approaches are in agreement. The evaluation framework integrates ecological services and economic and social functions into a comprehensive output from agricultural land. This approach is more methodical and accurate for evaluating the compre- hensive efficiency of land use based on quantities and spatial scale because they are at the pixel scale. Finally, the evaluation results have important implications for enhancing current agricultural subsidies and even implementing ecological payment policies in China. Most importantly, they can be directly applied to agricultural transformation regulations, decision-making, and guidance for rational land utilization.展开更多
Metal-organic frameworks（MOFs） are a unique class of porous crystalline materials that have shown promise for a wide range of applications. MOFs have been explored as a new type of heterogeneous catalytic materials,...Metal-organic frameworks（MOFs） are a unique class of porous crystalline materials that have shown promise for a wide range of applications. MOFs have been explored as a new type of heterogeneous catalytic materials, because of their high surface area, uniform and tunable pores, facile functionalization and incorporation of catalytic active sites. The use of multi-functional sites MOF materials as catalysts for synergistic catalysis and tandem reactions has attracted increasing attention. In this review, we aim to introduce the construction of bi-or multi-functional MOF catalysts with cooperative or cascade functions via post-synthetic modification（PSM）.展开更多
To fulfill the demands for higher quality,efficiency and flexibility in aviation industry,a multi-functional end effector is designed to automate the drilling and riveting processes in assembling carbon fiber reinforc...To fulfill the demands for higher quality,efficiency and flexibility in aviation industry,a multi-functional end effector is designed to automate the drilling and riveting processes in assembling carbon fiber reinforced polymer(CFRP)and aluminum components for a robotic aircraft assembly system.To meet the specific functional requirements for blind rivet installation on CFRP and aluminum materials,additional modules are incorporated on the end effector aside of the basic processing modules for drilling.And all of these processing modules allow for a onestep-drilling-countersinking process,hole inspection,automatic rivet feed,rivet geometry check,sealant application,rivet insertion and installation.Besides,to guarantee the better quality of the hole drilled and joints riveted,several online detection and adjustment measures are applied to this end effector,including the reference detection and perpendicular calibration,which could effectively ensure the positioning precision and perpendicular accuracy as demanded.Finally,the test result shows that this end effector is capable of producing each hole to a positioning precision within ±0.5 mm,aperpendicular accuracy within 0.3°,a diameter tolerance of H8,and a countersink depth tolerance of±0.01 mm.Moreover,it could drill and rivet up to three joints per minute,with acceptable shearing and tensile strength.展开更多
BACKGROUND: In the early period of orthotopic liver transplantation (OLT), initial poor graft function (IPGF) is one of the complications which leads to primary graft non-function (PGNF) in serious cases. This study s...BACKGROUND: In the early period of orthotopic liver transplantation (OLT), initial poor graft function (IPGF) is one of the complications which leads to primary graft non-function (PGNF) in serious cases. This study set out to establish the clinical risk factors resulting in IPGF after OLT. METHODS: Eighty cases of OLT were analyzed. The IPGF group consisted of patients with alanine aminotransferase (ALT) and/or aspartate aminotransferase (AST) above 1500 IU/L within 72 hours after OLT, while those in the non-IPGF group had values below 1500 IU/L. Recipient-associated factors before OLT analyzed were age, sex, primary liver disease and Child-Pugh classification; factors analyzed within the peri-operative period were non-heart beating time (NHBT), cold ischemia time (CIT), rewarming ischemic time (RWIT), liver biopsy at the end of cold ischemia; and factors analyzed within 72 hours after OLT were ALT and/or AST values. A logistic regression model was applied to filter the possible factors resulting in IPGF. RESULTS: Donor NHBT, CIT and RWIT were significantly longer in the IPGF group than in the non-IPGF group; in the logistic regression model, NHBT was the risk factor leading to IPGF (P < 0.05), while CIT and RWIT were possible risk factors. In one case in the IPGF group, PGNF appeared with moderate hepatic steatosis. CONCLUSIONS: Longer NHBT is an important risk factor leading to IPGF, while serious steatosis in the donor liver, CIT and RWIT are potential risk factors.展开更多
This paper presents a two-phase genetic algorithm (TPGA) based on the multi- parent genetic algorithm (MPGA). Through analysis we find MPGA will lead the population' s evol vement to diversity or convergence accor...This paper presents a two-phase genetic algorithm (TPGA) based on the multi- parent genetic algorithm (MPGA). Through analysis we find MPGA will lead the population' s evol vement to diversity or convergence according to the population size and the crossover size, so we make it run in different forms during the global and local optimization phases and then forms TPGA. The experiment results show that TPGA is very efficient for the optimization of low-dimension multi-modal functions, usually we can obtain all the global optimal solutions.展开更多
Orthomorphic permutations have good characteristics in cryptosystems. In this paper, by using of knowledge about relation between orthomorphic permutations and multi-output functions, and conceptions of the generalize...Orthomorphic permutations have good characteristics in cryptosystems. In this paper, by using of knowledge about relation between orthomorphic permutations and multi-output functions, and conceptions of the generalized Walsh spectrum of multi-output functions and the auto-correlation function of multi-output functions to investigate the Walsh spectral characteristics and the auto-correlation function characteristics of orthormophic permutations, several results are obtained.展开更多
The three-dimensional free vibration analysis of a multi-directional func- tionally graded piezoelectric （FGP） annular plate resting on two parameter （Pasternak） elastic foundations is investigated under different...The three-dimensional free vibration analysis of a multi-directional func- tionally graded piezoelectric （FGP） annular plate resting on two parameter （Pasternak） elastic foundations is investigated under different boundary conditions. The material properties are assumed to vary continuously along the radial and thickness directions and have exponent-law distribution. A semi-analytical approach named the state space based differential quadrature method （SSDQM） is used to provide an analytical solution along the thickness using the state space method （SSM） and an approximate solution along the radial direction using the one-dimensional differential quadrature method （DQM）. The influence of the Winkler and shear stiffness of the foundation~ the material property graded variations, and the circumferential wave number on the nomdimensional natural frequency of multi-directional FGP annular plates is studied.展开更多
In this paper, the definition of multl-output partially Bent functions is presented and some properties are discussed. Then the relationship between multi-output partially Bent functions and multi-output Bent function...In this paper, the definition of multl-output partially Bent functions is presented and some properties are discussed. Then the relationship between multi-output partially Bent functions and multi-output Bent functions is given in Theorem 4, which includes Walsh spectrum expression and function expression. This shows that multi-output partially Bent functions and multi-output Bent functions can define each other in principle. So we obtain the general method to construct multi-output partially Bent functions from multi-output Bent functions.展开更多
To improve image quality under low illumination conditions,a novel low-light image enhancement method is proposed in this paper based on multi-illumination estimation and multi-scale fusion(MIMS).Firstly,the illuminat...To improve image quality under low illumination conditions,a novel low-light image enhancement method is proposed in this paper based on multi-illumination estimation and multi-scale fusion(MIMS).Firstly,the illumination is processed by contrast-limited adaptive histogram equalization(CLAHE),adaptive complementary gamma function(ACG),and adaptive detail preserving S-curve(ADPS),respectively,to obtain three components.Then,the fusion-relevant features,exposure,and color contrast are selected as the weight maps.Subsequently,these components and weight maps are fused through multi-scale to generate enhanced illumination.Finally,the enhanced images are obtained by multiplying the enhanced illumination and reflectance.Compared with existing approaches,this proposed method achieves an average increase of 0.81%and 2.89%in the structural similarity index measurement(SSIM)and peak signal-to-noise ratio(PSNR),and a decrease of 6.17%and 32.61%in the natural image quality evaluator(NIQE)and gradient magnitude similarity deviation(GMSD),respectively.展开更多
In this paper, a new algorithm for solving multi-modal function optimization problems-two-level subspace evolutionary algorithm is proposed. In the first level, the improved GT algorithm is used to do global recombina...In this paper, a new algorithm for solving multi-modal function optimization problems-two-level subspace evolutionary algorithm is proposed. In the first level, the improved GT algorithm is used to do global recombination search so that the whole population can be separated into several niches according to the position of solutions; then, in the second level, the niche evolutionary strategy is used for local search in the subspaces gotten in the first level till solutions of the problem are found. The new algorithm has been tested on some hard problems and some good results are obtained.展开更多
We present definitions of the correlation degree and correlation coefficient of multi-output functions. Two relationships about the correlation degree of multi-output functions are proved. One is between the correlati...We present definitions of the correlation degree and correlation coefficient of multi-output functions. Two relationships about the correlation degree of multi-output functions are proved. One is between the correlation degree and independency, the other is between the correlation degree and balance. Especially the paper discusses the correlation degree of affine multioutput functions. We demonstrate properties of the correlation coefficient of multi-output functions. One is the value range of the correlation coefficient, one is the relationship between the correlation coefficient and independency, and another is the sufficient and necessary condition that two multi-output functions are equivalent to each other.展开更多
The spatial structures of China’s Major Function Zoning are important constraining indicators in all types of spatial planning and key parameters for accurately downscaling major functions.Taking the proportion of ur...The spatial structures of China’s Major Function Zoning are important constraining indicators in all types of spatial planning and key parameters for accurately downscaling major functions.Taking the proportion of urbanization zones,agricultural development zones and ecological security zones as the basic parameter,this paper explores the spatial structures of major function zoning at different scales using spatial statistics,spatial modeling and landscape metrics methods.The results show:First,major function zones have spatial gradient structures,which are prominently represented by latitudinal and longitudinal gradients,a coastal distance gradient,and an eastern-central-western gradient.Second,the pole-axis system structure and core-periphery structure exist at provincial scales.The general principle of the pole-axis structure is that as one moves along the distance axis,the proportion of urbanization zones decreases and the proportion of ecological security zones increases.This also means that the proportion of different function zones has a ring-shaped spatial differentiation principle with distance from the core.Third,there is a spatial mosaic structure at the city and county scale.This spatial mosaic structure has features of both spatial heterogeneity,such as agglomeration and dispersion,as well as of mutual,adjacent topological correlation and spatial proximity.The results of this study contribute to scientific knowledge on major function zones and the principles of spatial organization,and it acts as an important reference for China’s integrated geographical zoning.展开更多
To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed...To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed translation schema（SSDTS）. This method, which is deduced from the syntactic modeling of multi-function radars, considers the probabilities of radar phrases appearance in different radar modes as well as the probabilities of radar word errors occurrence in different radar phrases. It concludes that the proposed method can not only correct the defective radar words by using the stochastic translation schema, but also identify the real radar phrases and working modes of measured emitters concurrently. Furthermore, a number of simulations are presented to demonstrate the identification capability and adaptability of the SSDTS algorithm.The results show that even under the condition of the defective radar words distorted by noise,the proposed algorithm can infer the phrases, work modes and types of measured emitters correctly.展开更多
As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery...As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.展开更多
The binary random in-chain silyl-hydride multi-functionalized poly（styrene/butadiene/isoprene and dimethyl[4-（1-phenylvinyl） phenyl]silane） （PS-DPESiH, PB-DPESiH, PI-DPESiH） copolymers were successfully synthesi...The binary random in-chain silyl-hydride multi-functionalized poly（styrene/butadiene/isoprene and dimethyl[4-（1-phenylvinyl） phenyl]silane） （PS-DPESiH, PB-DPESiH, PI-DPESiH） copolymers were successfully synthesized. These functionalized copo- lymers were prepared in hexane with n-BuLi as the initiator at 50℃ for 4 h. The silyl-hydride groups were introduced into polymer backbones quantitatively by living anionic polymerization. The copolymers were determined through 1H NMR, size exclusion chromatography （SEC） and differential scanning calorimetry （DSC） techniques, while the number of silyl-hych-ide groups was calculated and discussed.展开更多
With the occurrence of burst interference,bit error rate( BER) stability of the wireless communication system( WCS) always degrades significantly. To cope with it,a stability control algorithm is proposed,utilizing th...With the occurrence of burst interference,bit error rate( BER) stability of the wireless communication system( WCS) always degrades significantly. To cope with it,a stability control algorithm is proposed,utilizing the stability theory of switched systems,which is specifically applicable for multi-parameter adaptive WCS with spectrum sensing ability,and it is capable of stabilizing BER within a reasonable range. Firstly,WCS is modeled as a switched system. Then,based on the multi-Lyapunov function,controlling rules are presented to enable the switched system to satisfy stable condition asymptotically. Finally,analysis and numerical simulation results demonstrate that the switched WCS with the proposed controlling rules is superior to conventional power-controlled WCS with or without state feedback control in terms of stability performance.展开更多
The dynamic stiffness method combined with the Fourier transform is utilized to derive the in-plane Green’s functions for inclined and uniformly distributed loads in a multi-layered transversely isotropic（TI）half-s...The dynamic stiffness method combined with the Fourier transform is utilized to derive the in-plane Green’s functions for inclined and uniformly distributed loads in a multi-layered transversely isotropic（TI）half-space.The loaded layer is fixed to obtain solutions restricted in it and the corresponding reactions forces,which are then applied to the total system with the opposite sign.By adding solutions restricted in the loaded layer to solutions from the reaction forces,the global solutions in the wavenumber domain are obtained,and the dynamic Green’s functions in the space domain are recovered by the inverse Fourier transform.The presented formulations can be reduced to the isotropic case developed by Wolf（1985）,and are further verified by comparisons with existing solutions in a uniform isotropic as well as a layered TI halfspace subjected to horizontally distributed loads which are special cases of the more general problem addressed.The deduced Green’s functions,in conjunction with boundary element methods,will lead to significant advances in the investigation of a variety of wave scattering,wave radiation and soil-structure interaction problems in a layered TI site.Selected numerical results are given to investigate the influence of material anisotropy,frequency of excitation,inclination angle and layered on the responses of displacement and stress,and some conclusions are drawn.展开更多
文摘A multi functional wood dehumidification dryer has been developed recently. The dryer can carry out air dehumidification by using only one refrigeration system, in which heat supplying and moisture air are exhausted by changing the position of several air dampers. In this paper, the work principles and characteristics of the dehumidification dryer are introduced, and the testing results about the thermal engineering performance of the dehumidification dryer, as well as the experiment results of drying several species of lumbers are expounded.
基金Foundation items： High-technology Research and Development Programme of China （2007AA03Z544） Aeronautical Science Foundation of China （20075221001）
文摘Multi-functional Al-matrix composites with high volume fraction （55%-57%） of SiC particles are produced with the new pressureless infiltration fabrication technology. X-ray detection and microscopic observation display the composites which are macroscopically homogeneous without porosity. The investigation further reveals that the SiC/Al composites possess low density （2.94 g/cm^3）, high elastic modulus （220 GPa）, prominent thermal management function as a result of low coefficient of thermal expansion （8 × 10^4 K^-1） and high thermal conductivity （235 W/（m.K）） as well as unique preventability of resonance vibration. By adopting a series of developed techniques, the multi-functional SiC/Al composites have managed to be made into near-net-shape parts. Many kinds of precision components of space-based optomechanical structures and airborne optoelectronic platform have been turned out. Of them, several typical products are being under test in practices.
基金National Natural Science Foundation of China, No.41271550 Humanities and Social Sciences Project of Ministry of Education in the West and the Frontier Areas, No. 12XJC790003
文摘The excessive expansion of urbanized areas has resulted in haphazard land utili- zation, immoderate consumption of superior agricultural land and water resources, significant fragmentation of agricultural landscape, and gradual deterioration of the agro-ecological en- vironment. Combined, these factors cause poor land use efficiency. Under these circum- stances, comprehensively assessing land use efficiency for urban agriculture is a key issue in land use research. Currently, evaluation methods for agricultural land use efficiency narrowly concentrate on aspects of economic input and output. However, urban agro-ecosystems can provide diverse economic, social, and ecological services and functions. In particular, the social and ecological services and functions originating from agricultural land, which have a higher value than economic services, play a significant role in ensuring regional social, eco- logical, and environmental security. However, recent research has rarely taken these benefits into consideration. Therefore, land use value has been greatly underestimated, which has resulted in mishandled and poor land use policies. In this study, we apply Landsat imagery and social and economic statistical data for the Xi＇an metropolitan zone （XMZ） to investigate agricultural multi-functionality. We develop an evaluation framework for urban agricultural land use efficiency and identify agro-ecosystem services and functions as important outputs from agricultural land. The land use efficiency of urban agriculture is then evaluated using ecosystem services models, providing a mechanism for assessing spatial-temporal changes in land use efficiency in the XMZ from 1999 to 2015. Four important conclusions are reached from this analysis. First, the rapid urbanization and agricultural transformation from traditional cereal cultivation to modern urban agriculture has resulted in steadily increasing costs, out- puts, and land use efficiency of urban agriculture. The total output value increased 41% and land use efficiency per hectare increased by 33.13% on average. Second, the spatial patterns of comprehensive output and land use efficiency were dominated by economic outputs from agricultural land. Areas near cities, which are dominated by orchard and arable land, provide more economic functions. These areas support and regulate services due to the transforma- tion from extensive cereal production to intensive modern urban agriculture; therefore, they have higher output value and land use efficiency. In contrast, areas distant from cities, towns, and high traffic roads, namely, remote rural areas, provide more support and regulating ser- vices, but have relatively lower economic function due to inaccessibility tO urban markets and slow agricultural transformation. Therefore, these areas have lower output value and land use efficiency. The spatial change in agricultural output and land use efficiency in urban areas is strongly dependent on the degree of urbanization and agricultural transformation. Third, the total output value and land use efficiency of urban agriculture measured with our approach are much higher than evaluations using traditional methods. However, the spatial patterns measured using the two approaches are in agreement. The evaluation framework integrates ecological services and economic and social functions into a comprehensive output from agricultural land. This approach is more methodical and accurate for evaluating the compre- hensive efficiency of land use based on quantities and spatial scale because they are at the pixel scale. Finally, the evaluation results have important implications for enhancing current agricultural subsidies and even implementing ecological payment policies in China. Most importantly, they can be directly applied to agricultural transformation regulations, decision-making, and guidance for rational land utilization.
基金supported by the National Natural Science Foundation of China (Nos. 21371069 and 21621001)
文摘Metal-organic frameworks（MOFs） are a unique class of porous crystalline materials that have shown promise for a wide range of applications. MOFs have been explored as a new type of heterogeneous catalytic materials, because of their high surface area, uniform and tunable pores, facile functionalization and incorporation of catalytic active sites. The use of multi-functional sites MOF materials as catalysts for synergistic catalysis and tandem reactions has attracted increasing attention. In this review, we aim to introduce the construction of bi-or multi-functional MOF catalysts with cooperative or cascade functions via post-synthetic modification（PSM）.
基金supported by the National Natural Science Foundations of China(Nos.5157051626,51475225)
文摘To fulfill the demands for higher quality,efficiency and flexibility in aviation industry,a multi-functional end effector is designed to automate the drilling and riveting processes in assembling carbon fiber reinforced polymer(CFRP)and aluminum components for a robotic aircraft assembly system.To meet the specific functional requirements for blind rivet installation on CFRP and aluminum materials,additional modules are incorporated on the end effector aside of the basic processing modules for drilling.And all of these processing modules allow for a onestep-drilling-countersinking process,hole inspection,automatic rivet feed,rivet geometry check,sealant application,rivet insertion and installation.Besides,to guarantee the better quality of the hole drilled and joints riveted,several online detection and adjustment measures are applied to this end effector,including the reference detection and perpendicular calibration,which could effectively ensure the positioning precision and perpendicular accuracy as demanded.Finally,the test result shows that this end effector is capable of producing each hole to a positioning precision within ±0.5 mm,aperpendicular accuracy within 0.3°,a diameter tolerance of H8,and a countersink depth tolerance of±0.01 mm.Moreover,it could drill and rivet up to three joints per minute,with acceptable shearing and tensile strength.
基金This study was supported by a grant from the Shanghai Science and Technology Commission Foundation, China(No.O14119002).
文摘BACKGROUND: In the early period of orthotopic liver transplantation (OLT), initial poor graft function (IPGF) is one of the complications which leads to primary graft non-function (PGNF) in serious cases. This study set out to establish the clinical risk factors resulting in IPGF after OLT. METHODS: Eighty cases of OLT were analyzed. The IPGF group consisted of patients with alanine aminotransferase (ALT) and/or aspartate aminotransferase (AST) above 1500 IU/L within 72 hours after OLT, while those in the non-IPGF group had values below 1500 IU/L. Recipient-associated factors before OLT analyzed were age, sex, primary liver disease and Child-Pugh classification; factors analyzed within the peri-operative period were non-heart beating time (NHBT), cold ischemia time (CIT), rewarming ischemic time (RWIT), liver biopsy at the end of cold ischemia; and factors analyzed within 72 hours after OLT were ALT and/or AST values. A logistic regression model was applied to filter the possible factors resulting in IPGF. RESULTS: Donor NHBT, CIT and RWIT were significantly longer in the IPGF group than in the non-IPGF group; in the logistic regression model, NHBT was the risk factor leading to IPGF (P < 0.05), while CIT and RWIT were possible risk factors. In one case in the IPGF group, PGNF appeared with moderate hepatic steatosis. CONCLUSIONS: Longer NHBT is an important risk factor leading to IPGF, while serious steatosis in the donor liver, CIT and RWIT are potential risk factors.
基金Supported by the National Natural Science Foundation of China (70071042,60073043,60133010)
文摘This paper presents a two-phase genetic algorithm (TPGA) based on the multi- parent genetic algorithm (MPGA). Through analysis we find MPGA will lead the population' s evol vement to diversity or convergence according to the population size and the crossover size, so we make it run in different forms during the global and local optimization phases and then forms TPGA. The experiment results show that TPGA is very efficient for the optimization of low-dimension multi-modal functions, usually we can obtain all the global optimal solutions.
基金Supported by State Key Laboratory of InformationSecurity Opening Foundation(01-02) .
文摘Orthomorphic permutations have good characteristics in cryptosystems. In this paper, by using of knowledge about relation between orthomorphic permutations and multi-output functions, and conceptions of the generalized Walsh spectrum of multi-output functions and the auto-correlation function of multi-output functions to investigate the Walsh spectral characteristics and the auto-correlation function characteristics of orthormophic permutations, several results are obtained.
文摘The three-dimensional free vibration analysis of a multi-directional func- tionally graded piezoelectric （FGP） annular plate resting on two parameter （Pasternak） elastic foundations is investigated under different boundary conditions. The material properties are assumed to vary continuously along the radial and thickness directions and have exponent-law distribution. A semi-analytical approach named the state space based differential quadrature method （SSDQM） is used to provide an analytical solution along the thickness using the state space method （SSM） and an approximate solution along the radial direction using the one-dimensional differential quadrature method （DQM）. The influence of the Winkler and shear stiffness of the foundation~ the material property graded variations, and the circumferential wave number on the nomdimensional natural frequency of multi-directional FGP annular plates is studied.
基金Supported by State Key Laboratory of InformationSecurity Opening Foundation(01-02) the Doctorate Foundation ofInstitute of Information Engineering (YP20014401)HenanInno-vation Project for University Prominent Research Talents(2003KJCX008)
文摘In this paper, the definition of multl-output partially Bent functions is presented and some properties are discussed. Then the relationship between multi-output partially Bent functions and multi-output Bent functions is given in Theorem 4, which includes Walsh spectrum expression and function expression. This shows that multi-output partially Bent functions and multi-output Bent functions can define each other in principle. So we obtain the general method to construct multi-output partially Bent functions from multi-output Bent functions.
基金supported by the National Key R&D Program of China(No.2022YFB3205101)NSAF(No.U2230116)。
文摘To improve image quality under low illumination conditions,a novel low-light image enhancement method is proposed in this paper based on multi-illumination estimation and multi-scale fusion(MIMS).Firstly,the illumination is processed by contrast-limited adaptive histogram equalization(CLAHE),adaptive complementary gamma function(ACG),and adaptive detail preserving S-curve(ADPS),respectively,to obtain three components.Then,the fusion-relevant features,exposure,and color contrast are selected as the weight maps.Subsequently,these components and weight maps are fused through multi-scale to generate enhanced illumination.Finally,the enhanced images are obtained by multiplying the enhanced illumination and reflectance.Compared with existing approaches,this proposed method achieves an average increase of 0.81%and 2.89%in the structural similarity index measurement(SSIM)and peak signal-to-noise ratio(PSNR),and a decrease of 6.17%and 32.61%in the natural image quality evaluator(NIQE)and gradient magnitude similarity deviation(GMSD),respectively.
基金Supported by the National Natural Science Foundation of China (70071042,60073043,60133010)
文摘In this paper, a new algorithm for solving multi-modal function optimization problems-two-level subspace evolutionary algorithm is proposed. In the first level, the improved GT algorithm is used to do global recombination search so that the whole population can be separated into several niches according to the position of solutions; then, in the second level, the niche evolutionary strategy is used for local search in the subspaces gotten in the first level till solutions of the problem are found. The new algorithm has been tested on some hard problems and some good results are obtained.
文摘We present definitions of the correlation degree and correlation coefficient of multi-output functions. Two relationships about the correlation degree of multi-output functions are proved. One is between the correlation degree and independency, the other is between the correlation degree and balance. Especially the paper discusses the correlation degree of affine multioutput functions. We demonstrate properties of the correlation coefficient of multi-output functions. One is the value range of the correlation coefficient, one is the relationship between the correlation coefficient and independency, and another is the sufficient and necessary condition that two multi-output functions are equivalent to each other.
基金National Natural Science Foundation of China,No.41630644Innovative Think-tank Foundation for Young Scientists of China Association for Science and Technology,No.DXB-ZKQN-2017-048。
文摘The spatial structures of China’s Major Function Zoning are important constraining indicators in all types of spatial planning and key parameters for accurately downscaling major functions.Taking the proportion of urbanization zones,agricultural development zones and ecological security zones as the basic parameter,this paper explores the spatial structures of major function zoning at different scales using spatial statistics,spatial modeling and landscape metrics methods.The results show:First,major function zones have spatial gradient structures,which are prominently represented by latitudinal and longitudinal gradients,a coastal distance gradient,and an eastern-central-western gradient.Second,the pole-axis system structure and core-periphery structure exist at provincial scales.The general principle of the pole-axis structure is that as one moves along the distance axis,the proportion of urbanization zones decreases and the proportion of ecological security zones increases.This also means that the proportion of different function zones has a ring-shaped spatial differentiation principle with distance from the core.Third,there is a spatial mosaic structure at the city and county scale.This spatial mosaic structure has features of both spatial heterogeneity,such as agglomeration and dispersion,as well as of mutual,adjacent topological correlation and spatial proximity.The results of this study contribute to scientific knowledge on major function zones and the principles of spatial organization,and it acts as an important reference for China’s integrated geographical zoning.
基金supported by the National Natural Science Foundation of China (No. 61002026)
文摘To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed translation schema（SSDTS）. This method, which is deduced from the syntactic modeling of multi-function radars, considers the probabilities of radar phrases appearance in different radar modes as well as the probabilities of radar word errors occurrence in different radar phrases. It concludes that the proposed method can not only correct the defective radar words by using the stochastic translation schema, but also identify the real radar phrases and working modes of measured emitters concurrently. Furthermore, a number of simulations are presented to demonstrate the identification capability and adaptability of the SSDTS algorithm.The results show that even under the condition of the defective radar words distorted by noise,the proposed algorithm can infer the phrases, work modes and types of measured emitters correctly.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2007AA04Z433)Hunan Provincial Natural Science Foundation of China (Grant No. 09JJ8005)Scientific Research Foundation of Graduate School of Beijing University of Chemical and Technology,China (Grant No. 10Me002)
文摘As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.
基金sponsored by the National Natural Science Foundation of China(Nos.21034001,21174021)
文摘The binary random in-chain silyl-hydride multi-functionalized poly（styrene/butadiene/isoprene and dimethyl[4-（1-phenylvinyl） phenyl]silane） （PS-DPESiH, PB-DPESiH, PI-DPESiH） copolymers were successfully synthesized. These functionalized copo- lymers were prepared in hexane with n-BuLi as the initiator at 50℃ for 4 h. The silyl-hydride groups were introduced into polymer backbones quantitatively by living anionic polymerization. The copolymers were determined through 1H NMR, size exclusion chromatography （SEC） and differential scanning calorimetry （DSC） techniques, while the number of silyl-hych-ide groups was calculated and discussed.
基金Supported by the National Natural Science Foundation of China(No.61572254,61301103)
文摘With the occurrence of burst interference,bit error rate( BER) stability of the wireless communication system( WCS) always degrades significantly. To cope with it,a stability control algorithm is proposed,utilizing the stability theory of switched systems,which is specifically applicable for multi-parameter adaptive WCS with spectrum sensing ability,and it is capable of stabilizing BER within a reasonable range. Firstly,WCS is modeled as a switched system. Then,based on the multi-Lyapunov function,controlling rules are presented to enable the switched system to satisfy stable condition asymptotically. Finally,analysis and numerical simulation results demonstrate that the switched WCS with the proposed controlling rules is superior to conventional power-controlled WCS with or without state feedback control in terms of stability performance.
基金National Natural Science Foundation of China under grant No.51578373 and 51578372the Natural Science Foundation of Tianjin Municipality under Grant No.16JCYBJC21600
文摘The dynamic stiffness method combined with the Fourier transform is utilized to derive the in-plane Green’s functions for inclined and uniformly distributed loads in a multi-layered transversely isotropic（TI）half-space.The loaded layer is fixed to obtain solutions restricted in it and the corresponding reactions forces,which are then applied to the total system with the opposite sign.By adding solutions restricted in the loaded layer to solutions from the reaction forces,the global solutions in the wavenumber domain are obtained,and the dynamic Green’s functions in the space domain are recovered by the inverse Fourier transform.The presented formulations can be reduced to the isotropic case developed by Wolf（1985）,and are further verified by comparisons with existing solutions in a uniform isotropic as well as a layered TI halfspace subjected to horizontally distributed loads which are special cases of the more general problem addressed.The deduced Green’s functions,in conjunction with boundary element methods,will lead to significant advances in the investigation of a variety of wave scattering,wave radiation and soil-structure interaction problems in a layered TI site.Selected numerical results are given to investigate the influence of material anisotropy,frequency of excitation,inclination angle and layered on the responses of displacement and stress,and some conclusions are drawn.
