The commercialization of solid oxide fuel cells depends on the cathode,which possesses both high catalytic activity and a thermal-expansion coefficient(TEC)that aligns with the electrolyte.Although the cobalt-based ca...The commercialization of solid oxide fuel cells depends on the cathode,which possesses both high catalytic activity and a thermal-expansion coefficient(TEC)that aligns with the electrolyte.Although the cobalt-based cathode La_(0.6)Sr_(0.4)CoO_(3)(LSC)offers excellent catalytic performance,its TEC is significantly larger than that of the electrolyte.In this study,we mechanically mix Sm_(0.2)Ce_(0.8)O_(2−δ)(SDC)with LSC to create a composite cathode.By incorporating 50wt%SDC,the TEC decreases significantly from 18.29×10^(−6) to 13.90×10^(−6) K^(−1).Under thermal-shock conditions ranging from room temperature to 800℃,the growth rate of polarization resistance is only 0.658%per cycle,i.e.,merely 49%that of pure LSC.The button cell comprising the LSC-SDC composite cathode operates stably for over 900 h without Sr segregation,with a voltage growth rate of 1.11%/kh.A commercial flat-tube cell(active area:70 cm^(2))compris-ing the LSC-SDC composite cathode delivers 54.8 W at 750℃.The distribution of relaxation-time shows that the non-electrode portion is the main rate-limiting step.This study demonstrates that the LSC-SDC mixture strategy effectively improves the compatibility with the electrolyte while maintaining a high output,thus rendering it a promising commercial cathode material.展开更多
Composite cathodes integrating Ni-rich layered oxides and oxide solid electrolytes are essential for highenergy all-solid-state lithium-ion batteries(ASSLBs),yet interfacial degradation during high-temperature co-sint...Composite cathodes integrating Ni-rich layered oxides and oxide solid electrolytes are essential for highenergy all-solid-state lithium-ion batteries(ASSLBs),yet interfacial degradation during high-temperature co-sintering(>600℃)remains a critical challenge.While surface passivation strategies mitigate reactions below 400℃,their effectiveness diminishes at elevated temperatures due to inability to counteract Li^(+)concentration gradients.Here,we introduce in situ lithium compensators,i.e.,LiOH/Li_(2)CO_(3),into NCM-LATP composite cathodes to dynamically replenish Li^(+)during co-sintering.These additives melt to form transient Li^(+)-rich phases that back-diffuse Li^(+)into NCM lattices,suppressing layered-to-rock salt transitions and stabilizing the interface.Quasi in situ XRD confirms retention of the layered structure at temperature up to 700℃,while electrochemical tests demonstrate a reversible capacity of 222.2 mA h g^(-1)—comparable to NCM before co-sintering—and an impressive 65.3% capacity retention improvement over100 cycles.In contrast,uncompensated cathodes exhibit severe degradation to 96.5 mA h g^(-1)due to Li depletion and resistive Li-Ti-O interphases.This strategy integrates sacrificial chemistry with scalable powder-mixing workflows,achieving a 93.4% reduction in interfacial impedance.By addressing Li^(+)flux homogenization and structural stability,this work provides a practical pathway toward industrialscale fabrication of high-performance ASSLBs.展开更多
The insulating nature and dissolution of vanadium-based oxides in aqueous electrolytes result in low capacity and lifespan during charge/discharge process, which is unable to meet the demands for the development and a...The insulating nature and dissolution of vanadium-based oxides in aqueous electrolytes result in low capacity and lifespan during charge/discharge process, which is unable to meet the demands for the development and application of high-energy-density aqueous zinc-ion batteries(AZIBs). Herein, a novel V_(2)O_(5-x)@C composite cathode consisting of conductive carbon coatings with abundant oxygen vacancies is specifically designed through plasma-enhanced chemical vapor deposition(PECVD) method. As expected,the ideal microstructure of V_(2)O_(5-x)@C cathode enables large specific surface areas, fast electron/ion diffusion kinetics, and superior interfacial stability, which can realize outstanding cycling stability and electrochemical performance. Consequently, the V_(2)O_(5-x)@C composite cathode delivers a high reversible rate capacity of 130.6 mAh/g at 10 A/g and remains 277.6 mAh/g when returned to 1 A/g. In addition, the Zn//V_(2)O_(5-x)@C full cell can stably cycle for 1000 cycles with a high initial specific capacity of 149.2 m Ah/g,possessing 83.8% capacity retention at 5 A/g. The process of constructing a conductive layer on the surface of cathode materials while increasing oxygen vacancies in the structure through PECVD provides new insight into the design of high-performance cathode materials for AZIBs.展开更多
In electrolyte melts containing K at low temperature, the penetrative and migratory path of alkali metals （K and Na） in pitch, furan, phenolic aldehyde and epoxy based TiB2-C composite cathodes during the electrolys...In electrolyte melts containing K at low temperature, the penetrative and migratory path of alkali metals （K and Na） in pitch, furan, phenolic aldehyde and epoxy based TiB2-C composite cathodes during the electrolysis process were studied by EDS and self-made modified Rapoport apparatus. The electrolysis expansion rates, the diffusion coefficients of the alkali metals and the corrosion rates of the composite cathode were also calculated and discussed. The results show that no matter what kind of binder is used, alkali metals have the same penetrative path in composite cathodes：firstly in pore, then in binder and finally in carbonaceous aggregates. K and Na penetrate into both binder and carbonaceous aggregates, which leads to the expansion of composite cathodes, and K has stronger penetration ability than Na. Electrolysis expansion rate of resin based composite cathode is smaller than that of pitch based composite cathodes, and so do the diffusion coefficient and corrosion rate. Resin based composite cathode has better resistance ability to the penetration of alkali metals than pith based composite cathode, and phenolic aldehyde based composite cathode exhibits the strongest resistance ability. The penetration rate, the diffusion coefficient of alkali metals in phenolic aldehyde based TiB2-C composite cathode and the corresponding corrosion rate are 4.72 mm/h, 2.24×10^-5 cm^2/s and 2.31 mm/a, respectively.展开更多
Vapor-grown carbon fibers （VGCFs） were introduced as conductive additives for sulfur-multiwalled carbon nanotubes （S-MWCNTs） composite cathode of lithium-sulfur batteries. The performance of S-MWCNTs composite cat...Vapor-grown carbon fibers （VGCFs） were introduced as conductive additives for sulfur-multiwalled carbon nanotubes （S-MWCNTs） composite cathode of lithium-sulfur batteries. The performance of S-MWCNTs composite cathodes with carbon black and VGCFs as sole conductive additives was investigated using scanning electron microscopy （SEM）, galvanostatic charge-discharge tests and electrochemical impedance spectroscopy （EIS）. The results show that the S-MWCNTs composite cathode with VGCFs displays a network-like morphology and exhibits higher activity and better cycle durability compared with the composite cathode with carbon black, delivering an initial discharge capacity of 1254 mA＆#183;h/g and a capacity of 716 mA＆#183;h/g after 40 cycles at 335 mA/g. The interconnected VGCFs can provide a stable conductive network, suppress the aggregation of cathode materials and residual lithium sulfide and maintain the porosity of cathode, and therefore the electrochemical performance of S-MWCNTs composite cathode is enhanced.展开更多
The structure and characteristic of carbon materials have a direct influence on the electrochemical performance of sulfur-carbon composite electrode materials for lithium-sulfur battery. In this paper, sulfur composit...The structure and characteristic of carbon materials have a direct influence on the electrochemical performance of sulfur-carbon composite electrode materials for lithium-sulfur battery. In this paper, sulfur composite has been synthesized by heating a mixture of elemental sulfur and activated carbon, which is characterized as high specific surface area and microporous structure. The composite, contained 70% sulfur, as cathode in a lithium cell based on organic liquid electrolyte was tested at room temperature. It showed two reduction peaks at 2.05 V and 2.35 V, one oxidation peak at 2.4 V during cyclic voltammogram test. The initial discharge specific capacity was 1180.8 mAh g-1 and the utilization of electrochemically active sulfur was about 70.6% assuming a complete reaction to the product of Li2S. The specific capacity still kept as high as 720.4 mAh g^-1 after 60 cycles retaining 61% of the initial discharge capacity.展开更多
In this paper,we report on the preparation of Li2FeSiO4,sintered Li2FeSiO4,and Li2FeSiO4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries.Spindle-like Li2F...In this paper,we report on the preparation of Li2FeSiO4,sintered Li2FeSiO4,and Li2FeSiO4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries.Spindle-like Li2FeSi04 was synthesized by a facile hydrothermal method with（NH4）2Fe（SO4）2 as the iron source.The spindle-like Li2FeSiO4 was sintered at 600 ℃ for 6 h in Ar atmosphere.Li2FeSiO4-C composite was obtained by the hydrothermal treatment of spindle-like Li2FeSiO4 in glucose solution at 190 ℃ for 3 h.Electrochemical measurements show that after carbon coating,the electrode performances such as discharge capacity and high-rate capability are greatly enhanced.In particular.Li2FeSiO4-C with carbon content of 7.21 wt%delivers the discharge capacities of 160.9 mAh·g-1 at room temperature and 213 mAh·g-1 at45℃（0.1 C）,revealing the potential application in lithium-ion batteries.展开更多
The performance of multi-layer （1 -x）La0.8Sr0.2MnO3/xYSZ graded composite cathodes was studied as electrode materials for intermediate solid oxide fuel cells （SOFC）. The thermal expansion coefficient, electrical c...The performance of multi-layer （1 -x）La0.8Sr0.2MnO3/xYSZ graded composite cathodes was studied as electrode materials for intermediate solid oxide fuel cells （SOFC）. The thermal expansion coefficient, electrical conductivity, and electrochemical performance of multi-layer composite cathodes were investigated. The thermal expansion coefficient and electrical conductivity decreased with the increase in YSZ content. The （1 -x）Lao.sSr0.EMnO3/xYSZ composite cathode greatly increased the length of the active triple phase boundary line （TPBL） among electrode, electrolyte, and gas phase, leading to a decrease in polarization resistance and an increase in polarization current density. The polarization current density of the triple-layer graded composite cathode （0.77 A/cm2） was the highest and that of the monolayer cathode （0.13 A/cm2） was the lowest. The polarization resistance （Rp） of the triple-layer graded composite cathode was only 0.182 Ω·cm2 and that of the monolayer composite cathode was 0.323 Ω·cm2. The power density of the triple-layer graded composite cathode was the highest and that of the monolayer composite cathode was the lowest. The triple-layer graded composite cathode had superior performance.展开更多
The La0.8Sr0.04Ca0.16Co0.6Fe0.4O3-δ (LSCCoF) and La0.9Sr0.1Ga0.8Mg0.2O3 (LSGM) powders were synthesized by glycine-nitrate combustion process and conventional solid-state reaction method, respectively. The LSCCoF-LSG...The La0.8Sr0.04Ca0.16Co0.6Fe0.4O3-δ (LSCCoF) and La0.9Sr0.1Ga0.8Mg0.2O3 (LSGM) powders were synthesized by glycine-nitrate combustion process and conventional solid-state reaction method, respectively. The LSCCoF-LSGM composite cathode material was successfully elaborated and deposited on dense pellets of the LSGM electrolyte by means of slurry spin-coating process. The cathode films with the best surface morphology and microstructure were obtained when the operating parameters fixed as follows: the content of ethyl cellulose which acted as pore former and binder is 10 wt.%, the content of terpineol which acted as modifier is 5 wt.%, the speed of rotation rate is 3200 r/min and the best post-deposition sintering temperature is 1000°C.展开更多
All-solid-state lithium battery(ASLB)based on sulfide-based electrolyte is considered to be a candidate for the next-generation high-energy storage system.Despite the high ionic conductivity of sulfide solid electroly...All-solid-state lithium battery(ASLB)based on sulfide-based electrolyte is considered to be a candidate for the next-generation high-energy storage system.Despite the high ionic conductivity of sulfide solid electrolyte,the poor interfacial stability(mechanically and chemically)between active materials and sulfide solid electrolytes in composite cathodes leads to inferior electrochemical performances,which impedes the practical application of sulfide electrolytes.In the past years,various of strategies have been carried out to achieve an interface with low impedance in the composite cathodes.Herein,a review of recent progress of composite cathodes for all-solid-state sulfide-based lithium batteries is summarized,including the interfacial issues,design strategies,fabrication methods,and characterization techniques.Finally,the main challenges and perspectives of composite cathodes for high-performance all-solidstate batteries are highlighted for future development.展开更多
TiB2/C cathode composites with various contents of TiB2 were prepared and their characterizations were observed and compared. The expansion of samples due to sodium and bath penetration was tested with a modified labo...TiB2/C cathode composites with various contents of TiB2 were prepared and their characterizations were observed and compared. The expansion of samples due to sodium and bath penetration was tested with a modified laboratory Rapoport apparatus and the appearances of the cut sections of specimens after electrolysis were studied. The results show that the mass of TiB2/C cathode composites with mass fraction of TiB2 less than 70% appreciably increases, but that of the composites with mass fraction of TiB2 more than 70% decreases slightly after being baked. The resistance to sodium and bath penetration of TiB2/C cathode composites increases with the increase of TiB2 content, especially in the composites with high TiB2 content. TiB2/C cathode composites have high resistance to the penetration of sodium and bath as well as good wettability by molten aluminum, and keep integrality and have little change of appearance after electrolysis, which indicates that TiB2/C cathode composites can be used as inert wettable cathode for aluminum electrolysis.展开更多
In situ chemical oxidation polymerization of pyrrole on the surface of sulfur particles was carried out to synthesize a sulfur/polypyrrole （SIPPy） nanocomposite with core-shell structure. The composite was character...In situ chemical oxidation polymerization of pyrrole on the surface of sulfur particles was carried out to synthesize a sulfur/polypyrrole （SIPPy） nanocomposite with core-shell structure. The composite was characterized by elemental analysis, X-ray diffraction, scanning/transmission electron microscopy, and electrochemical measurements. XRD and FTIR results showed that sulfur well dispersed in the core-shell structure and PPy structure was successfully obtained via in situ oxidative polymerization of pyrrole on the surface of sulfur particles. TEM observation revealed that PPy was formed and fixed to the surface of sulfur nanoparticle after polymerization, developing a well-defined core-shell structure and the thickness of PPy coating layer was in the range of 20-30 nm. In the composite, PPy worked as a conducting matrix as well as a coating agent, which confined the active materials within the electrode. Consequently, the as prepared SIPPy composite cathode exhibited good cycling and rate performances for rechargeable lithium/sulfur batteries. The resulting cell containing SIPPy composite cathode yields a discharge capacity of 1039 mAh·g^-1 at the initial cycle and retains 59% of this value over 50 cycles at 0.1 C rate. At 1 C rate, the SIPPy composite showed good cycle stability, and the discharge capacity was 475 mAh·g^-1 after 50 cycles.展开更多
Lithium-sulfur batteries(LSBs),owing to their much higher energy density compared to the traditional lithium-ion battery,are deemed as one of the most promising candidates for the energy storage system.However,several...Lithium-sulfur batteries(LSBs),owing to their much higher energy density compared to the traditional lithium-ion battery,are deemed as one of the most promising candidates for the energy storage system.However,several issues including shuttle effect,lithium dendrites,and volumetric expansion seriously impede the commercial applications of LSBs.One-dimensional carbon materials(1DCMs)have been widely used as the matrix material for LSBs due to their high surface area,superior conductivity,good flexibility,excellent mechanical stability,and functional modifiability.In this review,the recent progress in 1D carbon-based composites as cathode including metal compounds/1DCMs,MOFs/1DCMs,MXenes/1DCMs,and polymers/1DCMs were discussed.Different strategies for polysulfide confinement and analysis of the functions of various components in the composites were summarized detailly.In the end,the current challenges of LSBs were systematically summarized,and the future outlooks were proposed,aiming at providing a comprehensive insight into the design of new host materials for nextgeneration LSBs.展开更多
Sodium-ion batteries have received a surge of interests for the alternatives to lithium-ion batteries due to their abundant reserves and low cost.The quest of reliable and high-performance cathode materials is crucial...Sodium-ion batteries have received a surge of interests for the alternatives to lithium-ion batteries due to their abundant reserves and low cost.The quest of reliable and high-performance cathode materials is crucial to future Na storage technologies.Herein,poly(3,4-ethylenedioxythiophene)(PEDOT)was successfully introduced to NaV3O8 via in situ oxidation polymerization,which can effectively enhance electron conductivity and ionic diffusion of NaV3O8 material.As a result,these NaV3O8@-PEDOT composites exhibit a significantly improved electrochemical performance including cycle stability and rate performance.In particular,NaV3O8@20 wt%PEDOT composite demonstrates better dispersibility and lower charge transfer resistance compared with bare NaV3O8,which delivers the first discharge capacity of 142 mAh-g-1and holds about 128.7 mAh·g-1 after 300 cycles at a current density of 120 mA·g-1.Even at a high current density of 300 mA·g-1,a high reversible capacity of 99.6 mAh·g-1 is revealed.All these consequences suggest that NaV3O8@20 wt%PEDOT composite may be a promising candidate to serve as a high-rate and long-lifespan cathode material for sodium-ion batteries.展开更多
The solid-state lithium battery is considered as an ideal next-generation energy storage device owing to its high safety,high energy density and low cost.However,the poor ionic conductivity of solid electrolyte and lo...The solid-state lithium battery is considered as an ideal next-generation energy storage device owing to its high safety,high energy density and low cost.However,the poor ionic conductivity of solid electrolyte and low interfacial stability has hindered the application of solid-state lithium battery.Here,a flexible polymer/garnet solid electrolyte is prepared with poly(ethylene oxide),poly(vinylidene fluoride),Li6.75La3 Zr1.75Ta0.25O12,lithium bis(trifluoromethanesulfonyl)imide and oxalate,which exhibits an ionic conductivity of 2.0 ×10^(-4) S cm^(-1) at 55℃,improved mechanical property,wide electrochemical window(4.8 V vs.Li/Li+),enhanced thermal stabilities.Tiny acidic OX was introduced to inhibit the alkalinity reactions between Li6.75La3 Zr1.75Ta0.25O12 and poly(vinylidene fluoride).In order to improve the interfacial stability between cathode and electrolyte,an Al2 O3@LiNi0.5Co0.2Mn0.3O2 based composite cathode framework is also fabricated with poly(ethylene oxide) polymer and lithium salt as additives.The solid-state lithium battery assembled with polymer/garnet solid electrolyte and composite cathode framework demonstrates a high initial discharge capacity of 150.6 mAh g^(-1) and good capacity retention of 86.7% after 80 cycles at 0.2 C and 55℃,which provides a promising choice for achieving the stable electrode/electrolyte interfacial contact in solid-state lithium batteries.展开更多
Pitch and TiB2/C green composite cathode material were respectively analyzed with simultaneous DSC-TGA, and effects of three baking processes of TiB2/C composite cathode material, i.e. K25, K5 and M5, on properties of...Pitch and TiB2/C green composite cathode material were respectively analyzed with simultaneous DSC-TGA, and effects of three baking processes of TiB2/C composite cathode material, i.e. K25, K5 and M5, on properties of TiB2/C composite cathode material were investigated. The results show that thermogravimetrie behavior of pitch and TiB2/C green composite cathode is similar, and appears the largest mass loss rate in the temperature range from 200 to 600 ℃. The bulk density variation of sample K5 before and after baking is the largest （11.9%）, that of sample K25 is the second, and that of sample M5 is the smallest （6.7%）. The crushing strength of sample M5 is the biggest （51.2 MPa）, that of sample K2.5 is the next, and that of sample K5 is the smallest （32.8 MPa）. But, the orders of the electrical resistivity and electrolysis expansion of samples are just opposite with the order of crushing strength. The heating rate has a great impact on the microstructure of sample. The faster the heating rate is, the bigger the pore size and porosity of sample are. Compared with the heating rate between 200 and 600℃ of samples K25 and K5, that of sample M5 is slower and suitable for baking process of TiB2/C composite cathode material.展开更多
Solid oxide fuel cells （SOFCs） offer high energy conversion, low noise, low pollutant emission, and low processing cost. Despite many advantages, SOFCs face a major challenge in competing with other types of fuel ce...Solid oxide fuel cells （SOFCs） offer high energy conversion, low noise, low pollutant emission, and low processing cost. Despite many advantages, SOFCs face a major challenge in competing with other types of fuel cells because of their high operating temperature. The necessity to reduce the operational temperature of SOFCs has led to the development of research into the materials and fabrication technology of fuel cells. The use of composite cathodes significantly reduces the cathode polarization resistance and expands the triple phase boundary area available for oxygen reduction. Powder preparation and composite cathode fabrication also affect the overall performance of composite cathodes and fuel cells. Among many types of cathode materials, lanthanum-based materials such as lanthanum strontium cobalt ferrite （Lal_xSrxCOl_yFey03_~） have recently been discovered to offer great compatibility with ceria-based electrolytes in performing as composite cathode materials for intermediate- to low-temperature SOFCs （IT-LTSOFCs）. This paper reviews various ceria-based composite cathodes for IT-LTSOFCs and focuses on the aspects of progress and challenges in materials technology.展开更多
A Ti-BN complex cathode is made from Ti and h-BN powders by the powder metallurgy technology, and TiBN coating is obtained by plasma immersion ion implantation and deposition with this Ti-BN composite cathode. The TiB...A Ti-BN complex cathode is made from Ti and h-BN powders by the powder metallurgy technology, and TiBN coating is obtained by plasma immersion ion implantation and deposition with this Ti-BN composite cathode. The TiBN coating shows a self-forming multilayered nanocomposite structure while with relative uniform elemental distributions. High resolution transmission electron microscopy images reveal that the multilayered structure is derived from different grain sizes in the nanocomposite. Due to the existence of h-BN phase, the friction coefficient of the coating is about 0.25.展开更多
The cathode material La1-xSrxCuO3-δ(x=0.15, 0.2, 0.3, 0.4) was synthesized by a sol-gel method. X-ray diffraction reveals that a single phase of perovskite is formed. The investigation of the electrical properties su...The cathode material La1-xSrxCuO3-δ(x=0.15, 0.2, 0.3, 0.4) was synthesized by a sol-gel method. X-ray diffraction reveals that a single phase of perovskite is formed. The investigation of the electrical properties suggests that La0.7Sr0.3CuO3-δ has the highest electrical conductivity. La0.7Sr0.3CuO3-δ powder was mixed with different amount SDC (Sm0.15Ce0.85O1.925) powder (5wt.%-30wt.%) as composite cathodes. Electrochemical properties of the composite cathodes were researched further. Investigation suggests that the addition of appropriate amount SDC to La0.7Sr0.3CuO3-δ can improve the electrochemical properties and obtain better cathodic performance. Using La0.7Sr0.3CuO3-δ-SDC composite materials as a cathode based on SDC electrolyte, higher current density and power density at intermediate temperatures can be obtained.展开更多
A new cathode with Ti2 Ni alloys and Ni/Mo electrocatalyst has been developed for alkaline water electrolysis. The characterization for hydrogen evolution reaction (HER)is carried out in a 30 wt% potassium hydroxide (...A new cathode with Ti2 Ni alloys and Ni/Mo electrocatalyst has been developed for alkaline water electrolysis. The characterization for hydrogen evolution reaction (HER)is carried out in a 30 wt% potassium hydroxide (KOH) solution. The cathode shows a low hydrogen overpotential(η=60 mV at 70℃ in 30 wt% KOH) and ezcellent stability under conditions of continuous electrolysis and intermittent electrolysis with power interruption .展开更多
基金the financial support from the National Natural Science Foundation of China(No.22209191)Ningbo Key R&D Project(No.2023Z155).
文摘The commercialization of solid oxide fuel cells depends on the cathode,which possesses both high catalytic activity and a thermal-expansion coefficient(TEC)that aligns with the electrolyte.Although the cobalt-based cathode La_(0.6)Sr_(0.4)CoO_(3)(LSC)offers excellent catalytic performance,its TEC is significantly larger than that of the electrolyte.In this study,we mechanically mix Sm_(0.2)Ce_(0.8)O_(2−δ)(SDC)with LSC to create a composite cathode.By incorporating 50wt%SDC,the TEC decreases significantly from 18.29×10^(−6) to 13.90×10^(−6) K^(−1).Under thermal-shock conditions ranging from room temperature to 800℃,the growth rate of polarization resistance is only 0.658%per cycle,i.e.,merely 49%that of pure LSC.The button cell comprising the LSC-SDC composite cathode operates stably for over 900 h without Sr segregation,with a voltage growth rate of 1.11%/kh.A commercial flat-tube cell(active area:70 cm^(2))compris-ing the LSC-SDC composite cathode delivers 54.8 W at 750℃.The distribution of relaxation-time shows that the non-electrode portion is the main rate-limiting step.This study demonstrates that the LSC-SDC mixture strategy effectively improves the compatibility with the electrolyte while maintaining a high output,thus rendering it a promising commercial cathode material.
基金financially supported by the National Natural Science Foundation of China(52102206)the Natural Science Foundation of Beijing Municipality-Shunyi Innovation Collaborative Joint Fund(L247018)+2 种基金the Natural Science Foundation of Beijing Municipality(2254076 and 2252024)the Central Guidance on Local Science and Technology Development Fund of Hebei Province(246Z4412G)the Fundamental Research Funds for the Central Universities(2025MS022,North China Electric Power University)。
文摘Composite cathodes integrating Ni-rich layered oxides and oxide solid electrolytes are essential for highenergy all-solid-state lithium-ion batteries(ASSLBs),yet interfacial degradation during high-temperature co-sintering(>600℃)remains a critical challenge.While surface passivation strategies mitigate reactions below 400℃,their effectiveness diminishes at elevated temperatures due to inability to counteract Li^(+)concentration gradients.Here,we introduce in situ lithium compensators,i.e.,LiOH/Li_(2)CO_(3),into NCM-LATP composite cathodes to dynamically replenish Li^(+)during co-sintering.These additives melt to form transient Li^(+)-rich phases that back-diffuse Li^(+)into NCM lattices,suppressing layered-to-rock salt transitions and stabilizing the interface.Quasi in situ XRD confirms retention of the layered structure at temperature up to 700℃,while electrochemical tests demonstrate a reversible capacity of 222.2 mA h g^(-1)—comparable to NCM before co-sintering—and an impressive 65.3% capacity retention improvement over100 cycles.In contrast,uncompensated cathodes exhibit severe degradation to 96.5 mA h g^(-1)due to Li depletion and resistive Li-Ti-O interphases.This strategy integrates sacrificial chemistry with scalable powder-mixing workflows,achieving a 93.4% reduction in interfacial impedance.By addressing Li^(+)flux homogenization and structural stability,this work provides a practical pathway toward industrialscale fabrication of high-performance ASSLBs.
基金financially supported by the National Natural Science Foundation of China (No. 52377222)Natural Science Foundation of Hunan Province (No. 2023JJ20064)。
文摘The insulating nature and dissolution of vanadium-based oxides in aqueous electrolytes result in low capacity and lifespan during charge/discharge process, which is unable to meet the demands for the development and application of high-energy-density aqueous zinc-ion batteries(AZIBs). Herein, a novel V_(2)O_(5-x)@C composite cathode consisting of conductive carbon coatings with abundant oxygen vacancies is specifically designed through plasma-enhanced chemical vapor deposition(PECVD) method. As expected,the ideal microstructure of V_(2)O_(5-x)@C cathode enables large specific surface areas, fast electron/ion diffusion kinetics, and superior interfacial stability, which can realize outstanding cycling stability and electrochemical performance. Consequently, the V_(2)O_(5-x)@C composite cathode delivers a high reversible rate capacity of 130.6 mAh/g at 10 A/g and remains 277.6 mAh/g when returned to 1 A/g. In addition, the Zn//V_(2)O_(5-x)@C full cell can stably cycle for 1000 cycles with a high initial specific capacity of 149.2 m Ah/g,possessing 83.8% capacity retention at 5 A/g. The process of constructing a conductive layer on the surface of cathode materials while increasing oxygen vacancies in the structure through PECVD provides new insight into the design of high-performance cathode materials for AZIBs.
基金Project (51304152) supported by the National Natural Science Foundation of ChinaProject (2013JQ7016) supported by the Natural Science Foundation of Shanxi Province,ChinaProject (2013JK0904) supported by Shanxi Provincial Education Department,China
文摘In electrolyte melts containing K at low temperature, the penetrative and migratory path of alkali metals （K and Na） in pitch, furan, phenolic aldehyde and epoxy based TiB2-C composite cathodes during the electrolysis process were studied by EDS and self-made modified Rapoport apparatus. The electrolysis expansion rates, the diffusion coefficients of the alkali metals and the corrosion rates of the composite cathode were also calculated and discussed. The results show that no matter what kind of binder is used, alkali metals have the same penetrative path in composite cathodes：firstly in pore, then in binder and finally in carbonaceous aggregates. K and Na penetrate into both binder and carbonaceous aggregates, which leads to the expansion of composite cathodes, and K has stronger penetration ability than Na. Electrolysis expansion rate of resin based composite cathode is smaller than that of pitch based composite cathodes, and so do the diffusion coefficient and corrosion rate. Resin based composite cathode has better resistance ability to the penetration of alkali metals than pith based composite cathode, and phenolic aldehyde based composite cathode exhibits the strongest resistance ability. The penetration rate, the diffusion coefficient of alkali metals in phenolic aldehyde based TiB2-C composite cathode and the corresponding corrosion rate are 4.72 mm/h, 2.24×10^-5 cm^2/s and 2.31 mm/a, respectively.
基金Project(JCYJ20120618164543322)supported by Strategic Emerging Industries Program of Shenzhen,ChinaProject(2013JSJJ027)supported by the Teacher Research Fund of Central South University,China
文摘Vapor-grown carbon fibers （VGCFs） were introduced as conductive additives for sulfur-multiwalled carbon nanotubes （S-MWCNTs） composite cathode of lithium-sulfur batteries. The performance of S-MWCNTs composite cathodes with carbon black and VGCFs as sole conductive additives was investigated using scanning electron microscopy （SEM）, galvanostatic charge-discharge tests and electrochemical impedance spectroscopy （EIS）. The results show that the S-MWCNTs composite cathode with VGCFs displays a network-like morphology and exhibits higher activity and better cycle durability compared with the composite cathode with carbon black, delivering an initial discharge capacity of 1254 mA＆#183;h/g and a capacity of 716 mA＆#183;h/g after 40 cycles at 335 mA/g. The interconnected VGCFs can provide a stable conductive network, suppress the aggregation of cathode materials and residual lithium sulfide and maintain the porosity of cathode, and therefore the electrochemical performance of S-MWCNTs composite cathode is enhanced.
基金supported by the National Key Program for Basic Research of China(No. 2009CB220100)the National 863 Program(No.2007AA03Z226)
文摘The structure and characteristic of carbon materials have a direct influence on the electrochemical performance of sulfur-carbon composite electrode materials for lithium-sulfur battery. In this paper, sulfur composite has been synthesized by heating a mixture of elemental sulfur and activated carbon, which is characterized as high specific surface area and microporous structure. The composite, contained 70% sulfur, as cathode in a lithium cell based on organic liquid electrolyte was tested at room temperature. It showed two reduction peaks at 2.05 V and 2.35 V, one oxidation peak at 2.4 V during cyclic voltammogram test. The initial discharge specific capacity was 1180.8 mAh g-1 and the utilization of electrochemically active sulfur was about 70.6% assuming a complete reaction to the product of Li2S. The specific capacity still kept as high as 720.4 mAh g^-1 after 60 cycles retaining 61% of the initial discharge capacity.
基金supported by the Programs of National 973(2011CB935900)NSFC(21231005)+1 种基金MOE(B12015 and 113016A)the Fundamental Research Funds for the Central Universities
文摘In this paper,we report on the preparation of Li2FeSiO4,sintered Li2FeSiO4,and Li2FeSiO4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries.Spindle-like Li2FeSi04 was synthesized by a facile hydrothermal method with（NH4）2Fe（SO4）2 as the iron source.The spindle-like Li2FeSiO4 was sintered at 600 ℃ for 6 h in Ar atmosphere.Li2FeSiO4-C composite was obtained by the hydrothermal treatment of spindle-like Li2FeSiO4 in glucose solution at 190 ℃ for 3 h.Electrochemical measurements show that after carbon coating,the electrode performances such as discharge capacity and high-rate capability are greatly enhanced.In particular.Li2FeSiO4-C with carbon content of 7.21 wt%delivers the discharge capacities of 160.9 mAh·g-1 at room temperature and 213 mAh·g-1 at45℃（0.1 C）,revealing the potential application in lithium-ion batteries.
基金This project is financially supported by the National Nature Science Foundation of China （No. 90510006）.
文摘The performance of multi-layer （1 -x）La0.8Sr0.2MnO3/xYSZ graded composite cathodes was studied as electrode materials for intermediate solid oxide fuel cells （SOFC）. The thermal expansion coefficient, electrical conductivity, and electrochemical performance of multi-layer composite cathodes were investigated. The thermal expansion coefficient and electrical conductivity decreased with the increase in YSZ content. The （1 -x）Lao.sSr0.EMnO3/xYSZ composite cathode greatly increased the length of the active triple phase boundary line （TPBL） among electrode, electrolyte, and gas phase, leading to a decrease in polarization resistance and an increase in polarization current density. The polarization current density of the triple-layer graded composite cathode （0.77 A/cm2） was the highest and that of the monolayer cathode （0.13 A/cm2） was the lowest. The polarization resistance （Rp） of the triple-layer graded composite cathode was only 0.182 Ω·cm2 and that of the monolayer composite cathode was 0.323 Ω·cm2. The power density of the triple-layer graded composite cathode was the highest and that of the monolayer composite cathode was the lowest. The triple-layer graded composite cathode had superior performance.
基金Project supported by the Natural Science Foundation of Yunnan Province (2009ZC027M)Program for New Century Excellent Talents in University (NCET-07-0387)
文摘The La0.8Sr0.04Ca0.16Co0.6Fe0.4O3-δ (LSCCoF) and La0.9Sr0.1Ga0.8Mg0.2O3 (LSGM) powders were synthesized by glycine-nitrate combustion process and conventional solid-state reaction method, respectively. The LSCCoF-LSGM composite cathode material was successfully elaborated and deposited on dense pellets of the LSGM electrolyte by means of slurry spin-coating process. The cathode films with the best surface morphology and microstructure were obtained when the operating parameters fixed as follows: the content of ethyl cellulose which acted as pore former and binder is 10 wt.%, the content of terpineol which acted as modifier is 5 wt.%, the speed of rotation rate is 3200 r/min and the best post-deposition sintering temperature is 1000°C.
基金supported by the National Natural Science Foundation of China of China(No.51771076)Innovative Research Groups of the National Natural Science Foundation of China(No.NSFC51621001)+2 种基金the‘‘1000 plan”from Chinese Government,the Guangdong‘‘Pearl River Talents Plan”(No.2017GC010218)the Guangzhou Science and Technology Plan Projects(No.201804010104)the R&D Program in Key Areas of Guangdong Province(No.2020B0101030005)。
文摘All-solid-state lithium battery(ASLB)based on sulfide-based electrolyte is considered to be a candidate for the next-generation high-energy storage system.Despite the high ionic conductivity of sulfide solid electrolyte,the poor interfacial stability(mechanically and chemically)between active materials and sulfide solid electrolytes in composite cathodes leads to inferior electrochemical performances,which impedes the practical application of sulfide electrolytes.In the past years,various of strategies have been carried out to achieve an interface with low impedance in the composite cathodes.Herein,a review of recent progress of composite cathodes for all-solid-state sulfide-based lithium batteries is summarized,including the interfacial issues,design strategies,fabrication methods,and characterization techniques.Finally,the main challenges and perspectives of composite cathodes for high-performance all-solidstate batteries are highlighted for future development.
文摘TiB2/C cathode composites with various contents of TiB2 were prepared and their characterizations were observed and compared. The expansion of samples due to sodium and bath penetration was tested with a modified laboratory Rapoport apparatus and the appearances of the cut sections of specimens after electrolysis were studied. The results show that the mass of TiB2/C cathode composites with mass fraction of TiB2 less than 70% appreciably increases, but that of the composites with mass fraction of TiB2 more than 70% decreases slightly after being baked. The resistance to sodium and bath penetration of TiB2/C cathode composites increases with the increase of TiB2 content, especially in the composites with high TiB2 content. TiB2/C cathode composites have high resistance to the penetration of sodium and bath as well as good wettability by molten aluminum, and keep integrality and have little change of appearance after electrolysis, which indicates that TiB2/C cathode composites can be used as inert wettable cathode for aluminum electrolysis.
基金supported by the Natural Science Foundation of Shaanxi Province,China(2013JM2009)
文摘In situ chemical oxidation polymerization of pyrrole on the surface of sulfur particles was carried out to synthesize a sulfur/polypyrrole （SIPPy） nanocomposite with core-shell structure. The composite was characterized by elemental analysis, X-ray diffraction, scanning/transmission electron microscopy, and electrochemical measurements. XRD and FTIR results showed that sulfur well dispersed in the core-shell structure and PPy structure was successfully obtained via in situ oxidative polymerization of pyrrole on the surface of sulfur particles. TEM observation revealed that PPy was formed and fixed to the surface of sulfur nanoparticle after polymerization, developing a well-defined core-shell structure and the thickness of PPy coating layer was in the range of 20-30 nm. In the composite, PPy worked as a conducting matrix as well as a coating agent, which confined the active materials within the electrode. Consequently, the as prepared SIPPy composite cathode exhibited good cycling and rate performances for rechargeable lithium/sulfur batteries. The resulting cell containing SIPPy composite cathode yields a discharge capacity of 1039 mAh·g^-1 at the initial cycle and retains 59% of this value over 50 cycles at 0.1 C rate. At 1 C rate, the SIPPy composite showed good cycle stability, and the discharge capacity was 475 mAh·g^-1 after 50 cycles.
基金financially supported by the National Natural Science Foundation of China(Nos.51872210,52072274,and 52104309)the Key Program of Natural Science Foundation of Hubei Province,China(No.2017CFA004)+1 种基金the Natural Science Foundation of Hubei Province(No.2021CFB011)the Scientific Research Project of Education Department of Hubei Province(No.D20201103)。
文摘Lithium-sulfur batteries(LSBs),owing to their much higher energy density compared to the traditional lithium-ion battery,are deemed as one of the most promising candidates for the energy storage system.However,several issues including shuttle effect,lithium dendrites,and volumetric expansion seriously impede the commercial applications of LSBs.One-dimensional carbon materials(1DCMs)have been widely used as the matrix material for LSBs due to their high surface area,superior conductivity,good flexibility,excellent mechanical stability,and functional modifiability.In this review,the recent progress in 1D carbon-based composites as cathode including metal compounds/1DCMs,MOFs/1DCMs,MXenes/1DCMs,and polymers/1DCMs were discussed.Different strategies for polysulfide confinement and analysis of the functions of various components in the composites were summarized detailly.In the end,the current challenges of LSBs were systematically summarized,and the future outlooks were proposed,aiming at providing a comprehensive insight into the design of new host materials for nextgeneration LSBs.
基金financially supported by the National Natural Science Foundation of China(Nos.21773057,U1704142 and U1904216)the Postdoctoral Science Foundation of China(No.2017M621833)+2 种基金Zhongyuan Thousand People Plan-The Zhongyuan Youth Talent Support Program(in Science andTechnology)of China(No.ZYQR201810139)the Program for Science and Technology Innovation Talents in Universities of Henan Province,China(No.18HASTIT008)the Fundamental Research Funds in Henan University of Technology(No.2018RCJH01)。
文摘Sodium-ion batteries have received a surge of interests for the alternatives to lithium-ion batteries due to their abundant reserves and low cost.The quest of reliable and high-performance cathode materials is crucial to future Na storage technologies.Herein,poly(3,4-ethylenedioxythiophene)(PEDOT)was successfully introduced to NaV3O8 via in situ oxidation polymerization,which can effectively enhance electron conductivity and ionic diffusion of NaV3O8 material.As a result,these NaV3O8@-PEDOT composites exhibit a significantly improved electrochemical performance including cycle stability and rate performance.In particular,NaV3O8@20 wt%PEDOT composite demonstrates better dispersibility and lower charge transfer resistance compared with bare NaV3O8,which delivers the first discharge capacity of 142 mAh-g-1and holds about 128.7 mAh·g-1 after 300 cycles at a current density of 120 mA·g-1.Even at a high current density of 300 mA·g-1,a high reversible capacity of 99.6 mAh·g-1 is revealed.All these consequences suggest that NaV3O8@20 wt%PEDOT composite may be a promising candidate to serve as a high-rate and long-lifespan cathode material for sodium-ion batteries.
基金Financial supports from the National Natural Science Foundation of China (51575030, 51532002 and 51872027)Beijing Natural Science Foundation (L172023)National Basic Research Program of China (2017YFE0113500)。
文摘The solid-state lithium battery is considered as an ideal next-generation energy storage device owing to its high safety,high energy density and low cost.However,the poor ionic conductivity of solid electrolyte and low interfacial stability has hindered the application of solid-state lithium battery.Here,a flexible polymer/garnet solid electrolyte is prepared with poly(ethylene oxide),poly(vinylidene fluoride),Li6.75La3 Zr1.75Ta0.25O12,lithium bis(trifluoromethanesulfonyl)imide and oxalate,which exhibits an ionic conductivity of 2.0 ×10^(-4) S cm^(-1) at 55℃,improved mechanical property,wide electrochemical window(4.8 V vs.Li/Li+),enhanced thermal stabilities.Tiny acidic OX was introduced to inhibit the alkalinity reactions between Li6.75La3 Zr1.75Ta0.25O12 and poly(vinylidene fluoride).In order to improve the interfacial stability between cathode and electrolyte,an Al2 O3@LiNi0.5Co0.2Mn0.3O2 based composite cathode framework is also fabricated with poly(ethylene oxide) polymer and lithium salt as additives.The solid-state lithium battery assembled with polymer/garnet solid electrolyte and composite cathode framework demonstrates a high initial discharge capacity of 150.6 mAh g^(-1) and good capacity retention of 86.7% after 80 cycles at 0.2 C and 55℃,which provides a promising choice for achieving the stable electrode/electrolyte interfacial contact in solid-state lithium batteries.
基金Project (2005CB623703) supported by the Major State Basic Research and Development Program of ChinaProject (2008AA030502) supported by the National High-Tech Research and Development Program of China
文摘Pitch and TiB2/C green composite cathode material were respectively analyzed with simultaneous DSC-TGA, and effects of three baking processes of TiB2/C composite cathode material, i.e. K25, K5 and M5, on properties of TiB2/C composite cathode material were investigated. The results show that thermogravimetrie behavior of pitch and TiB2/C green composite cathode is similar, and appears the largest mass loss rate in the temperature range from 200 to 600 ℃. The bulk density variation of sample K5 before and after baking is the largest （11.9%）, that of sample K25 is the second, and that of sample M5 is the smallest （6.7%）. The crushing strength of sample M5 is the biggest （51.2 MPa）, that of sample K2.5 is the next, and that of sample K5 is the smallest （32.8 MPa）. But, the orders of the electrical resistivity and electrolysis expansion of samples are just opposite with the order of crushing strength. The heating rate has a great impact on the microstructure of sample. The faster the heating rate is, the bigger the pore size and porosity of sample are. Compared with the heating rate between 200 and 600℃ of samples K25 and K5, that of sample M5 is slower and suitable for baking process of TiB2/C composite cathode material.
基金Project supported by the Universiti Kebangsaan Malaysia (No. UKM-RF-07-FRGS0260-2010)the Malaysia Government for Research Sponsorship (No. OUP-2012-075)
文摘Solid oxide fuel cells （SOFCs） offer high energy conversion, low noise, low pollutant emission, and low processing cost. Despite many advantages, SOFCs face a major challenge in competing with other types of fuel cells because of their high operating temperature. The necessity to reduce the operational temperature of SOFCs has led to the development of research into the materials and fabrication technology of fuel cells. The use of composite cathodes significantly reduces the cathode polarization resistance and expands the triple phase boundary area available for oxygen reduction. Powder preparation and composite cathode fabrication also affect the overall performance of composite cathodes and fuel cells. Among many types of cathode materials, lanthanum-based materials such as lanthanum strontium cobalt ferrite （Lal_xSrxCOl_yFey03_~） have recently been discovered to offer great compatibility with ceria-based electrolytes in performing as composite cathode materials for intermediate- to low-temperature SOFCs （IT-LTSOFCs）. This paper reviews various ceria-based composite cathodes for IT-LTSOFCs and focuses on the aspects of progress and challenges in materials technology.
基金Supported by the Fund of National Key Laboratory of High Power Microwave Technology under Grant No 2014-763.xy.kthe National Natural Science Foundation of China under Grant No 21573054the Joint Funds Key Project of the National Natural Science Foundation of China under Grant No U1537214
文摘A Ti-BN complex cathode is made from Ti and h-BN powders by the powder metallurgy technology, and TiBN coating is obtained by plasma immersion ion implantation and deposition with this Ti-BN composite cathode. The TiBN coating shows a self-forming multilayered nanocomposite structure while with relative uniform elemental distributions. High resolution transmission electron microscopy images reveal that the multilayered structure is derived from different grain sizes in the nanocomposite. Due to the existence of h-BN phase, the friction coefficient of the coating is about 0.25.
文摘The cathode material La1-xSrxCuO3-δ(x=0.15, 0.2, 0.3, 0.4) was synthesized by a sol-gel method. X-ray diffraction reveals that a single phase of perovskite is formed. The investigation of the electrical properties suggests that La0.7Sr0.3CuO3-δ has the highest electrical conductivity. La0.7Sr0.3CuO3-δ powder was mixed with different amount SDC (Sm0.15Ce0.85O1.925) powder (5wt.%-30wt.%) as composite cathodes. Electrochemical properties of the composite cathodes were researched further. Investigation suggests that the addition of appropriate amount SDC to La0.7Sr0.3CuO3-δ can improve the electrochemical properties and obtain better cathodic performance. Using La0.7Sr0.3CuO3-δ-SDC composite materials as a cathode based on SDC electrolyte, higher current density and power density at intermediate temperatures can be obtained.
文摘A new cathode with Ti2 Ni alloys and Ni/Mo electrocatalyst has been developed for alkaline water electrolysis. The characterization for hydrogen evolution reaction (HER)is carried out in a 30 wt% potassium hydroxide (KOH) solution. The cathode shows a low hydrogen overpotential(η=60 mV at 70℃ in 30 wt% KOH) and ezcellent stability under conditions of continuous electrolysis and intermittent electrolysis with power interruption .
