In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been...In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been constructed.Thus basing understanding of thecharacteristics of a control dynamics system on its measured procedure will simplify thedecision method of movement stability problems.展开更多
In order to analyze the mechanism of continental strong shocks from the angle of crustal movement using the data of repeated geodetic survey, this paper has proposed a physical method; it analyzes the mechanism of den...In order to analyze the mechanism of continental strong shocks from the angle of crustal movement using the data of repeated geodetic survey, this paper has proposed a physical method; it analyzes the mechanism of density change due to the occurrence of strong shocks by use of the physical quantity that reflects the time change of crustal density. (1) The general theory of the time change of density in the earth’ s interior and the theory of the time change of single layer density have been introduced, and an algorithm of stepwise iteration has been proposed; (2) The effect of the change of single layer density caused by fault dislocation has been analyzed in brief; (3) The characteristics of the time change of crustal density in the south of the seismogenic region before the 1996 Lijiang earthquake with M_L =7.0 have been studied; (4) The precursor model or causal mechanism of strong shocks possibly existing in the time change of crustal density has been investigated preliminarily.展开更多
In order to study mechanical stress on root from orthodontic tooth movement by sliding mechanics, a 3-dimensional finite element model incorporating all layers of a human mandibular dental arch with orthodontic applia...In order to study mechanical stress on root from orthodontic tooth movement by sliding mechanics, a 3-dimensional finite element model incorporating all layers of a human mandibular dental arch with orthodontic appliance has been developed to simulate mechanical stress on root from the orthodontic tooth movement. Simulated orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis was applied to the crown of the teeth. The finite element analysis showed when orthodontic forces were applied to the tooth, the stress was mainly concentrated at the neck of the tooth decreasing uniformly to the apex and crown. The highest stress on the root was 0.621 N/mm^2 for cervical margin of the canine, and 0.114 N/mm^2 for apical region of the canine. The top of canine crown showed the largest amount of displacement （2.417 μm）, while the lowest amount of displacement was located at the apical region of canine （0.043 μm）. In conclusion, this model might enable one to simulate orthodontic tooth movements clinically. Sliding force at 2 N is ideal to ensure the bodily orthodontic tooth movement. The highest stress concentration in the roots was always localized at the cervical margin when orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis, so there may be the same risk of root resorption when orthodontic force of 2 N at 0, 30 and 45 degree was used in clinic cases.展开更多
Based on flux-based formulation, a nodeless variable element method is developed to analyze two-dimensional steady-state and transient heat transfer problems. The nodeless variable element employs quadratic interpolat...Based on flux-based formulation, a nodeless variable element method is developed to analyze two-dimensional steady-state and transient heat transfer problems. The nodeless variable element employs quadratic interpolation functions to provide higher solution accuracy without necessity to actually generate additional nodes. The flux-based formulation is applied to reduce the complexity in deriving the finite element equations as compared to the conventional finite element method, The solution accuracy is further improved by implementing an adaptive meshing technique to generaie finite element mesh that can adapt and move along corresponding to the solution behavior. The technique generates small elements in the regions of steep solution gradients to provide accurate solution, and meanwhile it generates larger elements in the other regions where the solution gradients are slight to reduce the computational time and the computer memory. The effectiveness of the combined procedure is demonstrated by heat transfer problems that have exact solutions. These problems tire： （a） a steady-state heat conduction analysis in a square plate subjected to a highly localized surface heating, and （b） a transient heat conduction analysis in a long plate subjected to moving heat source.展开更多
This paper describes a new technology for solonchak soil reclamation in which surface flood irrigation of fresh water and pumped wells drainage of salty groundwater are combined. The comprehensive investigation of wat...This paper describes a new technology for solonchak soil reclamation in which surface flood irrigation of fresh water and pumped wells drainage of salty groundwater are combined. The comprehensive investigation of water and salt movement has been conducted through field test, laboratory simulation and numerical calculation. The dependence of desalination on irrigation water quantity, drainage quantity, leaching time and other parameters is obtained based on the field tests. The entire desalination process under the flood-irrigation and well-drainage operations was experimentally simulated in a vertical soil column. The water and salt movement has been numerically analysed for both the field and laboratory conditions. The present work indicates that this new technology can greatly improve the effects of desalination.展开更多
In this paper,we give the homotopy perturbation renormalization group method,this is a new method for turning point problem.Using this method,the independent variables are introduced by transformation without introduc...In this paper,we give the homotopy perturbation renormalization group method,this is a new method for turning point problem.Using this method,the independent variables are introduced by transformation without introducing new related variables and no matching is needed.The WKB approximation method problem can be solved.展开更多
Waves generated by vertical seafloor movements are simulated by use of a fully nonlinear two-dimensional numerical wave tank. In the souree region, the seafloor lifts to a designated height by a generation function. T...Waves generated by vertical seafloor movements are simulated by use of a fully nonlinear two-dimensional numerical wave tank. In the souree region, the seafloor lifts to a designated height by a generation function. The numerical tests show that the linear theory is only valid for estimating the wave behaviors induced by the seafloor movements with a small amplitude, and the fully nonlinear numerical model should be adopted in the simulation of the wave generation by the large amplitude seafloor movements. Without the background surface waves, many numerical tests on the stable maximum elevations η0^max are carried out by beth the linear theory and the fully nonlinear model. The results of two models are compared and analyzed. For the fully nonlinear model, the influences of the amplitudes and the horizontal lengths on η^max are stronger than that of the characteristic duration times. Furthermore, results reveal that there are significant differences be- tween the linear theory and the fully nonlinear model. When the influences of the background surface waves are considered, the corresponding numerical analyses reveal that with the fully nonlinear model the η0^max near-linearly varies with the wave amplitudes of the surface waves, and the η0^max has significant dependences on the wave lengths and the wave phases of the surface waves. In addition, the differences between the linear theory and the fully nonlinear model are still obvious, and these differences are significantly affected by the wave parameters of the background surface waves, such as the wave amplitude, the wave length and the wave phase.展开更多
The intrinsic factors such as the visual constraints, extrinsic such as biomechanics, interface such as the support: the writing, the linguistics, the typography, the sense of progress of the language, have their impa...The intrinsic factors such as the visual constraints, extrinsic such as biomechanics, interface such as the support: the writing, the linguistics, the typography, the sense of progress of the language, have their impact on the habit, and the fittest and particularly the efficiency in reading. We suspect that circuits and zones involved in horizontal orientation “right to the left” are not the same the other way around hanging the linguistic collection. Reading Arabic provided with a specific difference in vocalization proves to be a valuable model verification two major issues which arouse language perception: [lexical processing: is it instantaneous (visual memory) or delayed (memory-tampon)? ···]. And a comparison with other models of language detection mechanisms and brain areas mnemonics which is involved in making information. Results are significatively: children vocalized mode is best seen. It must extend the duration of the mode without vowels. In our opinion, our study is original, and we introduced what a valuable tool in the diagnosis of visual and cognitive strategy by the biotechnology technical based on variations in terms of reading. This opens a horizon of opportunity for the application of the method to the Arabic language to determine the differences in eye size reflecting the effects of task variables in reading and a comparative study of other languages.展开更多
为探究在集散式控制系统(distributed control system,DCS)危险排除过程中控制员不同信息搜索策略对排险任务绩效的影响及认知负荷的中介效应,基于虚拟现实技术、皮肤电采样和眼动追踪技术构建模拟DCS工控平台,招募20名相关专业被试参...为探究在集散式控制系统(distributed control system,DCS)危险排除过程中控制员不同信息搜索策略对排险任务绩效的影响及认知负荷的中介效应,基于虚拟现实技术、皮肤电采样和眼动追踪技术构建模拟DCS工控平台,招募20名相关专业被试参与模拟排险实验并对其认知负荷及排险绩效进行量化,使用眼动轨迹匹配法判断被试的信息搜索模式,研究认知负荷的中介效应及中介机理。研究结果表明:不同信息搜索策略会显著影响任务绩效;认知负荷对该影响的中介效应高达89.66%,表明信息搜索策略主要通过影响认知负荷来间接作用于排险任务绩效,认知负荷越高,任务绩效越低;逻辑系统搜索策略能通过高效图式匹配减少认知资源消耗,显著抑制认知负荷增长,任务绩效表现最佳;空间系统搜索较难抑制认知负荷,任务绩效较差;随机搜索被试认知负荷显著高于其他组,绩效表现最差;此外,不同认知负荷水平下被试的信息搜索策略没有明显转变倾向。研究结果可为DCS控制人员的考核和培训提供理论支撑。展开更多
A mathematical model based on influence function method was established to predict the surface movement and deformation due to underground mining, and the impact on the upper hydraulic facilities in one coal mine was ...A mathematical model based on influence function method was established to predict the surface movement and deformation due to underground mining, and the impact on the upper hydraulic facilities in one coal mine was analyzed used the model. The analysis indicates: the maximum surface subsidence reaches 3.5 m, and the predicted maximum horizontal surface deformation reaches 7.0 mm/m, which would result in crack, deformation and uneven settlement in the soil foundation of the upper hydraulic facilities and influence the quality directly. Therefore, reasonable engineering measurements should be adopted to ensure the safe operation.展开更多
文摘In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been constructed.Thus basing understanding of thecharacteristics of a control dynamics system on its measured procedure will simplify thedecision method of movement stability problems.
基金the State Key Basic Research Project(G1998040703),China.
文摘In order to analyze the mechanism of continental strong shocks from the angle of crustal movement using the data of repeated geodetic survey, this paper has proposed a physical method; it analyzes the mechanism of density change due to the occurrence of strong shocks by use of the physical quantity that reflects the time change of crustal density. (1) The general theory of the time change of density in the earth’ s interior and the theory of the time change of single layer density have been introduced, and an algorithm of stepwise iteration has been proposed; (2) The effect of the change of single layer density caused by fault dislocation has been analyzed in brief; (3) The characteristics of the time change of crustal density in the south of the seismogenic region before the 1996 Lijiang earthquake with M_L =7.0 have been studied; (4) The precursor model or causal mechanism of strong shocks possibly existing in the time change of crustal density has been investigated preliminarily.
文摘In order to study mechanical stress on root from orthodontic tooth movement by sliding mechanics, a 3-dimensional finite element model incorporating all layers of a human mandibular dental arch with orthodontic appliance has been developed to simulate mechanical stress on root from the orthodontic tooth movement. Simulated orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis was applied to the crown of the teeth. The finite element analysis showed when orthodontic forces were applied to the tooth, the stress was mainly concentrated at the neck of the tooth decreasing uniformly to the apex and crown. The highest stress on the root was 0.621 N/mm^2 for cervical margin of the canine, and 0.114 N/mm^2 for apical region of the canine. The top of canine crown showed the largest amount of displacement （2.417 μm）, while the lowest amount of displacement was located at the apical region of canine （0.043 μm）. In conclusion, this model might enable one to simulate orthodontic tooth movements clinically. Sliding force at 2 N is ideal to ensure the bodily orthodontic tooth movement. The highest stress concentration in the roots was always localized at the cervical margin when orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis, so there may be the same risk of root resorption when orthodontic force of 2 N at 0, 30 and 45 degree was used in clinic cases.
文摘Based on flux-based formulation, a nodeless variable element method is developed to analyze two-dimensional steady-state and transient heat transfer problems. The nodeless variable element employs quadratic interpolation functions to provide higher solution accuracy without necessity to actually generate additional nodes. The flux-based formulation is applied to reduce the complexity in deriving the finite element equations as compared to the conventional finite element method, The solution accuracy is further improved by implementing an adaptive meshing technique to generaie finite element mesh that can adapt and move along corresponding to the solution behavior. The technique generates small elements in the regions of steep solution gradients to provide accurate solution, and meanwhile it generates larger elements in the other regions where the solution gradients are slight to reduce the computational time and the computer memory. The effectiveness of the combined procedure is demonstrated by heat transfer problems that have exact solutions. These problems tire： （a） a steady-state heat conduction analysis in a square plate subjected to a highly localized surface heating, and （b） a transient heat conduction analysis in a long plate subjected to moving heat source.
基金The project supported by the National Natural Science Foundation of China
文摘This paper describes a new technology for solonchak soil reclamation in which surface flood irrigation of fresh water and pumped wells drainage of salty groundwater are combined. The comprehensive investigation of water and salt movement has been conducted through field test, laboratory simulation and numerical calculation. The dependence of desalination on irrigation water quantity, drainage quantity, leaching time and other parameters is obtained based on the field tests. The entire desalination process under the flood-irrigation and well-drainage operations was experimentally simulated in a vertical soil column. The water and salt movement has been numerically analysed for both the field and laboratory conditions. The present work indicates that this new technology can greatly improve the effects of desalination.
文摘In this paper,we give the homotopy perturbation renormalization group method,this is a new method for turning point problem.Using this method,the independent variables are introduced by transformation without introducing new related variables and no matching is needed.The WKB approximation method problem can be solved.
基金supported by the National Science Fund for Distinguished Young Scholars(Grant No.40425015)the Knowledge Innovation Programs of the Chinese Academy of Sciences(Grant No.kzcx2-yw-201).
文摘Waves generated by vertical seafloor movements are simulated by use of a fully nonlinear two-dimensional numerical wave tank. In the souree region, the seafloor lifts to a designated height by a generation function. The numerical tests show that the linear theory is only valid for estimating the wave behaviors induced by the seafloor movements with a small amplitude, and the fully nonlinear numerical model should be adopted in the simulation of the wave generation by the large amplitude seafloor movements. Without the background surface waves, many numerical tests on the stable maximum elevations η0^max are carried out by beth the linear theory and the fully nonlinear model. The results of two models are compared and analyzed. For the fully nonlinear model, the influences of the amplitudes and the horizontal lengths on η^max are stronger than that of the characteristic duration times. Furthermore, results reveal that there are significant differences be- tween the linear theory and the fully nonlinear model. When the influences of the background surface waves are considered, the corresponding numerical analyses reveal that with the fully nonlinear model the η0^max near-linearly varies with the wave amplitudes of the surface waves, and the η0^max has significant dependences on the wave lengths and the wave phases of the surface waves. In addition, the differences between the linear theory and the fully nonlinear model are still obvious, and these differences are significantly affected by the wave parameters of the background surface waves, such as the wave amplitude, the wave length and the wave phase.
文摘The intrinsic factors such as the visual constraints, extrinsic such as biomechanics, interface such as the support: the writing, the linguistics, the typography, the sense of progress of the language, have their impact on the habit, and the fittest and particularly the efficiency in reading. We suspect that circuits and zones involved in horizontal orientation “right to the left” are not the same the other way around hanging the linguistic collection. Reading Arabic provided with a specific difference in vocalization proves to be a valuable model verification two major issues which arouse language perception: [lexical processing: is it instantaneous (visual memory) or delayed (memory-tampon)? ···]. And a comparison with other models of language detection mechanisms and brain areas mnemonics which is involved in making information. Results are significatively: children vocalized mode is best seen. It must extend the duration of the mode without vowels. In our opinion, our study is original, and we introduced what a valuable tool in the diagnosis of visual and cognitive strategy by the biotechnology technical based on variations in terms of reading. This opens a horizon of opportunity for the application of the method to the Arabic language to determine the differences in eye size reflecting the effects of task variables in reading and a comparative study of other languages.
文摘为探究在集散式控制系统(distributed control system,DCS)危险排除过程中控制员不同信息搜索策略对排险任务绩效的影响及认知负荷的中介效应,基于虚拟现实技术、皮肤电采样和眼动追踪技术构建模拟DCS工控平台,招募20名相关专业被试参与模拟排险实验并对其认知负荷及排险绩效进行量化,使用眼动轨迹匹配法判断被试的信息搜索模式,研究认知负荷的中介效应及中介机理。研究结果表明:不同信息搜索策略会显著影响任务绩效;认知负荷对该影响的中介效应高达89.66%,表明信息搜索策略主要通过影响认知负荷来间接作用于排险任务绩效,认知负荷越高,任务绩效越低;逻辑系统搜索策略能通过高效图式匹配减少认知资源消耗,显著抑制认知负荷增长,任务绩效表现最佳;空间系统搜索较难抑制认知负荷,任务绩效较差;随机搜索被试认知负荷显著高于其他组,绩效表现最差;此外,不同认知负荷水平下被试的信息搜索策略没有明显转变倾向。研究结果可为DCS控制人员的考核和培训提供理论支撑。
文摘A mathematical model based on influence function method was established to predict the surface movement and deformation due to underground mining, and the impact on the upper hydraulic facilities in one coal mine was analyzed used the model. The analysis indicates: the maximum surface subsidence reaches 3.5 m, and the predicted maximum horizontal surface deformation reaches 7.0 mm/m, which would result in crack, deformation and uneven settlement in the soil foundation of the upper hydraulic facilities and influence the quality directly. Therefore, reasonable engineering measurements should be adopted to ensure the safe operation.
