The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the Ca...The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the CaO/SiO_(2)slag mass ratio(C/S ratio)on the dissolution rate of alumina-based refractory ceramics was investigated.The results indicate that the dissolution rate increases with an increase of the C/S ratio and is mainly controlled by diffusion.During the early stage of dissolution,for all C/S ratios,the dissolution process conforms to the classical invariant interface approximation model.During the later stage of dissolution,when the C/S ratio is≥6,the dissolution process is significantly different from the model above because of the formation of a thick interfacial layer,which can be explained by dissolution kinetics.展开更多
A multi-phase slag containing Na2O is potential to efficiently dephosphorize high-P hot metal.After dephosphorization,the generated slag with high P2O5 content is regarded as a P resource.Because P2O5 was mainly conce...A multi-phase slag containing Na2O is potential to efficiently dephosphorize high-P hot metal.After dephosphorization,the generated slag with high P2O5 content is regarded as a P resource.Because P2O5 was mainly concentrated in the 2CaO SiO2-3CaO P2O5 solid solution,the recovery of P from dephosphorization slag primarily depends on the separation of the solid solution from other phases.The distribution ratios of P2O5 between solid solution and liquid phase in the CaOSiO2-FeO-P2O5-Nslag system were investigated.The results indicated that the addition of Na2O facilitated the enrichment of P2O5 in the solid solution because it increased not only the distribution ratio of P2O5 but also the mass fraction of the solid solution.The distribution ratio of P2O5 was independent of the P2O5 content in slag.A higher P2O5 content in slag resulted in higher P2O5 and Na2O contents in the solid solution.The distribution ratio of P2O5 increased with the total Fe content in the liquid phase,regardless of the valence of Fe.An increase in the FeO content in slag brought a higher P2O5 content in the solid solution.As slag basicity increased,the distribution ratio of P2O5 increased,but the P2O5 content in the solid solution decreased.展开更多
SiO2 coated Ce2S3 red pigment was prepared in ethanol/H2O system via sol-gel method and TEOS were used as silica sources. X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy...SiO2 coated Ce2S3 red pigment was prepared in ethanol/H2O system via sol-gel method and TEOS were used as silica sources. X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDX）, UV-visible spectro-photometer and automatic colorimeter were used to investigate the properties of the samples. The results showed that the compact SiO2 film formed on the surface of Ce2S3 pigment at a cerium silicon molar ratio of 2. The thermal stability temperature of Ce2S3 pigment was improved to 450 oC after SiO2 coating. In addition, the color of Ce2S3 pigment was not affected significantly through coating colorless and transparent SiO2 and it could be used as safe red pigment in higher temperature fields.展开更多
基金supported by the National Natural Science Foundation of China(52272022)the Special Project of Central Government for Local Science and Technology Development of Hubei Province(2019ZYYD076)the Innovation and Entrepreneurship Fund of Wuhan University of Science and Technology(D202202171045002669).
文摘The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the CaO/SiO_(2)slag mass ratio(C/S ratio)on the dissolution rate of alumina-based refractory ceramics was investigated.The results indicate that the dissolution rate increases with an increase of the C/S ratio and is mainly controlled by diffusion.During the early stage of dissolution,for all C/S ratios,the dissolution process conforms to the classical invariant interface approximation model.During the later stage of dissolution,when the C/S ratio is≥6,the dissolution process is significantly different from the model above because of the formation of a thick interfacial layer,which can be explained by dissolution kinetics.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51704010,51604003,U1760117)Key Laboratory Open Project Fund of Metallurgical Emission Reduction and Resources Recycling(Anhui University of Technology)Ministry of Education(JKF18-02).
文摘A multi-phase slag containing Na2O is potential to efficiently dephosphorize high-P hot metal.After dephosphorization,the generated slag with high P2O5 content is regarded as a P resource.Because P2O5 was mainly concentrated in the 2CaO SiO2-3CaO P2O5 solid solution,the recovery of P from dephosphorization slag primarily depends on the separation of the solid solution from other phases.The distribution ratios of P2O5 between solid solution and liquid phase in the CaOSiO2-FeO-P2O5-Nslag system were investigated.The results indicated that the addition of Na2O facilitated the enrichment of P2O5 in the solid solution because it increased not only the distribution ratio of P2O5 but also the mass fraction of the solid solution.The distribution ratio of P2O5 was independent of the P2O5 content in slag.A higher P2O5 content in slag resulted in higher P2O5 and Na2O contents in the solid solution.The distribution ratio of P2O5 increased with the total Fe content in the liquid phase,regardless of the valence of Fe.An increase in the FeO content in slag brought a higher P2O5 content in the solid solution.As slag basicity increased,the distribution ratio of P2O5 increased,but the P2O5 content in the solid solution decreased.
基金Project supported by National Science and Technology Support Program(2011BAE30B03)Special Fund from Shaanxi Provincial Department of Education(12JK0467the Graduate Innovation Fund of Shaanxi Universityof Science and Technology for the financial support
文摘SiO2 coated Ce2S3 red pigment was prepared in ethanol/H2O system via sol-gel method and TEOS were used as silica sources. X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDX）, UV-visible spectro-photometer and automatic colorimeter were used to investigate the properties of the samples. The results showed that the compact SiO2 film formed on the surface of Ce2S3 pigment at a cerium silicon molar ratio of 2. The thermal stability temperature of Ce2S3 pigment was improved to 450 oC after SiO2 coating. In addition, the color of Ce2S3 pigment was not affected significantly through coating colorless and transparent SiO2 and it could be used as safe red pigment in higher temperature fields.
