In the field of broadband metamaterial absorbers,most research efforts have focused on optimizing the resonant layers and designing multi-layer structures,but relatively little attention has been paid to the dielectri...In the field of broadband metamaterial absorbers,most research efforts have focused on optimizing the resonant layers and designing multi-layer structures,but relatively little attention has been paid to the dielectric layers themselves.This paper proposed a method using carbonyl iron powder to modify the dielectric layer.This method significantly enhances the electromagnetic wave attenuation capability of the dielectric layer with the X-band range for metamaterial absorbers.A broadband absorber with a reflection loss(RL)of less than-10 dB within the frequency range of 4.98-18 GHz and covering the C,X,and Ku band was designed.This work analyzed the surface current distribution and the power loss distribution to elucidate the absorption mechanism of the absorber.It was found that the modified dielectric layer accounted for more than 30%of the total loss in the 2-18 GHz frequency band,and the effective absorption bandwidth(RL≤-10 dB)was almost twice that of the unmodified dielectric layer.This enhancement in absorption bandwidth is attributed to the introduction of a new electromagnetic wave loss mechanism by carbonyl iron powder.Meanwhile,the absorber exhibited good angular stability,maintaining at least 80%absorption(RL≤-7 dB)in the 7.0-18.0 GHz range even when the incident angle was increased to 60°.The experimental results showed that the measured results matched the simulation results well.Furthermore,compared with other methods for broadening the absorption bandwidth,the metamaterial absorber obtained by this method offers several advantages,including wideband absorption,thin profile,and a simple manufacturing process.This approach provides a new and promising direction for the design of broadband absorbers.展开更多
The integrated structure parts are widely used in aircraft. The distortion caused by residual stresses in thick pre-stretched aluminum plates during machining integrated parts is a common and serious problem. To predi...The integrated structure parts are widely used in aircraft. The distortion caused by residual stresses in thick pre-stretched aluminum plates during machining integrated parts is a common and serious problem. To predict and control the machining distortion, the residual stress distribution in the thick plate must be measured firstly. The modified removal method for measuring residual stress in thick pre-stretched aluminum plates is proposed and the stress-strain relation matrix is deduced by elasticity theory. The residual stress distribution in specimen of 7050T7451 plate is measured by using the method, and measurement results are analyzed and compared with data obtained by other methods. The method is effective to measure the residual stress.展开更多
The introduction of surface engineering is expected to be an effective strategy against fretting damage. A large number of studies show that the low gas multi-component （such as carbon, nitrogen, sulphur and oxygen, ...The introduction of surface engineering is expected to be an effective strategy against fretting damage. A large number of studies show that the low gas multi-component （such as carbon, nitrogen, sulphur and oxygen, etc） thermo-chemical treatment（LTGMTT） can overcome the brittleness of nitriding process, and upgrade the surface hardness and improve the wear resistance and fatigue properties of the work-pieces significantly. However, there are few reports on the anti-fretting properties of the LTGMTT modified layer up to now, which limits the applications of fretting. So this paper discusses the fretting wear behavior of modified layer on the surface of LZ50 （0.48%C） steel prepared by low temperature gas multi-component thermo-chemical treatment （LTGMTT） technology. The fretting wear tests of the modified layer flat specimens and its substrate （LZ50 steel） against 52100 steel balls with diameter of 40 mm are carried out under normal load of 150 N and displacement amplitudes varied from 2 μm to 40 μm. Characterization of the modified layer and dynamic analyses in combination with microscopic examinations were performed through the means of scanning electron microscope（SEM）, optical microscope（OM）, X-ray diffraction（XRD） and surface profilometer. The experimental results showed that the modified layer with a total thickness of 60 μm was consisted of three parts, i.e., loose layer, compound layer and diffusion layer. Compared with the substrate, the range of the mixed fretting regime（MFR） of the LTGMTT modified layer diminished, and the slip regime（SR） of the modified layer shifted to the direction of smaller displacement amplitude. The coefficient of friction（COF） of the modified layer was lower than that of the substrate in the initial stage. For the modified layer, the damage in partial slip regime（PSR） was very slight. The fretting wear mechanism of the modified layer both in MFR and SR was abrasive wear and delamination. The modified layer presented better wear resistance than the substrate in PSR and MFR; however, in SR, the wear resistance of the modified layer decreased with the increase of the displacement amplitudes. The experimental results can provide some experimental bases for promoting industrial application of LTGMTT modified layer in anti-fretting wear.展开更多
Ni modified layer is prepared on the surface of pure titanium by plasma surface alloying technique. Surface appearance, micro-structure morphology, composition distribution, phase structure and microhardness of Ni mod...Ni modified layer is prepared on the surface of pure titanium by plasma surface alloying technique. Surface appearance, micro-structure morphology, composition distribution, phase structure and microhardness of Ni modified layer are analyzed. Tribological performance and fatigue behaviors of Ni modified layer of pure titanium are observed using Pin-on-disc tribometer and repeated impact test. The results indicate that the surface mean Ni concentration of Ni modified layer is nearly 18% which is composed of TiNi, Ti2Ni and Ti phase. The maximum surface microhardness of Ni modified layer is approximately 580 HV which is almost two-fold of the hardness of the substrate. The wear resistance of Ni modified layer is improved obviously. The wear mechanism of Ni modified layer shows slight abrasion wearing, while pure titanium is abrasion and adhesion wearing. Ni modified layer presents better impact fatigue strength.展开更多
Cu modified layer was prepared on the surface of AISI304 stainless steel by plasma surface alloying technique. The effects of processing parameters on the thickness, surface topography, microstructure and chemical com...Cu modified layer was prepared on the surface of AISI304 stainless steel by plasma surface alloying technique. The effects of processing parameters on the thickness, surface topography, microstructure and chemical composition of Cu modified layer were characterized using glow discharge optical emission spectroscopy （GDOES）, scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The experimental results show that the surface modified layer is a duplex layer （deposited ＋ diffused layer） with thickness of about 26 ktm under the optimum process parameters. The modified layer is mainly composed of a mixture of Cu and expanded austenite phase. The ball-on-disk results show that the modified layer possesses low friction coefficients （0.25） and excellent wear resistance （wear volume 0.005 x 109 um3）. The Cu modified layer is very effective in killing the bacteria S. aureus. Meanwhile, no viable S. aureus is found after 3 h （100% killed） by contact with the Cu alloyed surface.展开更多
基金supported by the Key Research and Development Projects of Shaanxi Province,China(No.2020 ZDGY01-01)the Fundamental Research Funds for the Central Universities,China(No.D5000220202).
文摘In the field of broadband metamaterial absorbers,most research efforts have focused on optimizing the resonant layers and designing multi-layer structures,but relatively little attention has been paid to the dielectric layers themselves.This paper proposed a method using carbonyl iron powder to modify the dielectric layer.This method significantly enhances the electromagnetic wave attenuation capability of the dielectric layer with the X-band range for metamaterial absorbers.A broadband absorber with a reflection loss(RL)of less than-10 dB within the frequency range of 4.98-18 GHz and covering the C,X,and Ku band was designed.This work analyzed the surface current distribution and the power loss distribution to elucidate the absorption mechanism of the absorber.It was found that the modified dielectric layer accounted for more than 30%of the total loss in the 2-18 GHz frequency band,and the effective absorption bandwidth(RL≤-10 dB)was almost twice that of the unmodified dielectric layer.This enhancement in absorption bandwidth is attributed to the introduction of a new electromagnetic wave loss mechanism by carbonyl iron powder.Meanwhile,the absorber exhibited good angular stability,maintaining at least 80%absorption(RL≤-7 dB)in the 7.0-18.0 GHz range even when the incident angle was increased to 60°.The experimental results showed that the measured results matched the simulation results well.Furthermore,compared with other methods for broadening the absorption bandwidth,the metamaterial absorber obtained by this method offers several advantages,including wideband absorption,thin profile,and a simple manufacturing process.This approach provides a new and promising direction for the design of broadband absorbers.
文摘The integrated structure parts are widely used in aircraft. The distortion caused by residual stresses in thick pre-stretched aluminum plates during machining integrated parts is a common and serious problem. To predict and control the machining distortion, the residual stress distribution in the thick plate must be measured firstly. The modified removal method for measuring residual stress in thick pre-stretched aluminum plates is proposed and the stress-strain relation matrix is deduced by elasticity theory. The residual stress distribution in specimen of 7050T7451 plate is measured by using the method, and measurement results are analyzed and compared with data obtained by other methods. The method is effective to measure the residual stress.
基金supported by National Natural Science Foundation of China (Grant No. 50521503)National Basic Research Program of China (973 Program, Grant No. 2007CB714704)National Hi-tech Research and Development Program of China (863 Program, Grant No. 2006AA04Z406)
文摘The introduction of surface engineering is expected to be an effective strategy against fretting damage. A large number of studies show that the low gas multi-component （such as carbon, nitrogen, sulphur and oxygen, etc） thermo-chemical treatment（LTGMTT） can overcome the brittleness of nitriding process, and upgrade the surface hardness and improve the wear resistance and fatigue properties of the work-pieces significantly. However, there are few reports on the anti-fretting properties of the LTGMTT modified layer up to now, which limits the applications of fretting. So this paper discusses the fretting wear behavior of modified layer on the surface of LZ50 （0.48%C） steel prepared by low temperature gas multi-component thermo-chemical treatment （LTGMTT） technology. The fretting wear tests of the modified layer flat specimens and its substrate （LZ50 steel） against 52100 steel balls with diameter of 40 mm are carried out under normal load of 150 N and displacement amplitudes varied from 2 μm to 40 μm. Characterization of the modified layer and dynamic analyses in combination with microscopic examinations were performed through the means of scanning electron microscope（SEM）, optical microscope（OM）, X-ray diffraction（XRD） and surface profilometer. The experimental results showed that the modified layer with a total thickness of 60 μm was consisted of three parts, i.e., loose layer, compound layer and diffusion layer. Compared with the substrate, the range of the mixed fretting regime（MFR） of the LTGMTT modified layer diminished, and the slip regime（SR） of the modified layer shifted to the direction of smaller displacement amplitude. The coefficient of friction（COF） of the modified layer was lower than that of the substrate in the initial stage. For the modified layer, the damage in partial slip regime（PSR） was very slight. The fretting wear mechanism of the modified layer both in MFR and SR was abrasive wear and delamination. The modified layer presented better wear resistance than the substrate in PSR and MFR; however, in SR, the wear resistance of the modified layer decreased with the increase of the displacement amplitudes. The experimental results can provide some experimental bases for promoting industrial application of LTGMTT modified layer in anti-fretting wear.
基金Funded by the National Natural Science Foundation of China (Nos.51071106 and 50671071)the Shanxi Province Natural Science Foundation (No.2008012008-3)+1 种基金the National High-Tech Research and Development Program of China(the 863 Program)(No.2007AA03Z521)Taiyuan Science and Technology Project (No.08121030)
文摘Ni modified layer is prepared on the surface of pure titanium by plasma surface alloying technique. Surface appearance, micro-structure morphology, composition distribution, phase structure and microhardness of Ni modified layer are analyzed. Tribological performance and fatigue behaviors of Ni modified layer of pure titanium are observed using Pin-on-disc tribometer and repeated impact test. The results indicate that the surface mean Ni concentration of Ni modified layer is nearly 18% which is composed of TiNi, Ti2Ni and Ti phase. The maximum surface microhardness of Ni modified layer is approximately 580 HV which is almost two-fold of the hardness of the substrate. The wear resistance of Ni modified layer is improved obviously. The wear mechanism of Ni modified layer shows slight abrasion wearing, while pure titanium is abrasion and adhesion wearing. Ni modified layer presents better impact fatigue strength.
基金Funded by the National Natural Science Foundation of China (No.51171125)the Research Project Supported by Shanxi Scholarship council of China (No.2011-038)+1 种基金the Shanxi Province Science and Technology Key Project(No.20110321051)the Undergraduate Innovation Project of Taiyuan(No.100115101)
文摘Cu modified layer was prepared on the surface of AISI304 stainless steel by plasma surface alloying technique. The effects of processing parameters on the thickness, surface topography, microstructure and chemical composition of Cu modified layer were characterized using glow discharge optical emission spectroscopy （GDOES）, scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The experimental results show that the surface modified layer is a duplex layer （deposited ＋ diffused layer） with thickness of about 26 ktm under the optimum process parameters. The modified layer is mainly composed of a mixture of Cu and expanded austenite phase. The ball-on-disk results show that the modified layer possesses low friction coefficients （0.25） and excellent wear resistance （wear volume 0.005 x 109 um3）. The Cu modified layer is very effective in killing the bacteria S. aureus. Meanwhile, no viable S. aureus is found after 3 h （100% killed） by contact with the Cu alloyed surface.
