Acoustic Mode Analysis(AMA)for aero-engines can offer valuable insights for the design of silent engines as well as for fault diagnosis.Commonly,this is done in the(spatial)Fourier domain,necessitating the use of mult...Acoustic Mode Analysis(AMA)for aero-engines can offer valuable insights for the design of silent engines as well as for fault diagnosis.Commonly,this is done in the(spatial)Fourier domain,necessitating the use of multiple uniformly spaced microphones to ensure adequate resolution.Recent works show that sub-Nyquist estimation is feasible using sparse reconstruction frameworks,although such modelling generally introduces an estimation bias that has to be compensated for.Moreover,there is a growing interest in monitoring mode amplitude over continuous time,as it can offer crucial insights for diagnosing operational conditions.In this work,we introduce a Block Orthogonal Matching Pursuit(BOMP)method for continuous time mode analysis,exploiting the underlying structural sparsity of the signal model.Specifically,the(pseudo)‘0ànorm penalty is employed to induce sparsity in the wavenumber domain,whereas a block structure is imposed as a constraint to monitor the amplitude variation in the time domain.The effectiveness of the BOMP is evaluated using both numerical simulations and experimental measurements,indicating the proposed method's preferable performance as compared to the classic Least Absolute Shrinkage and Selection Operator(LASSO)and Orthogonal Matching Pursuit(OMP)methods.展开更多
Purpose:To evaluate the effects of healthcare failure mode and effect analysis(FMEA)on the prevention of deep venous thrombosis(DVT)in elderly patients undergoing femoral fracture surgery.Methods:Eighty elderly patien...Purpose:To evaluate the effects of healthcare failure mode and effect analysis(FMEA)on the prevention of deep venous thrombosis(DVT)in elderly patients undergoing femoral fracture surgery.Methods:Eighty elderly patients undergoing femoral fracture surgery who did not apply FMEA in Suzhou BenQ Medical Center from June 1,2022 to May 31,2023 were selected as the control group.According to the equal group experiment method,80 elderly patients who were managed using FMEA from June 1,2023 to May 31,2024 were selected as the FMEA group.The control group received traditional nursing management,while the FMEA group applied FMEA to analyze failure causes,calculate Risk Priority Numbers(RPNs),identify failure modes with higher RPNs,analyze the influencing factors,develop improvement measures,and optimize processes.The RPN values and the incidence of DVT,as well as nursing satisfaction scores,were compared in the two groups.Results:Compared with the control group,the total RPN values of the FEMA group decreased significantly,with a reduction rate of 87.0%.Besides,the incidence of DVT was 1.3%in the FMEA group,lower than 10.0%in the control group(8/80).What’s more,the patients in the FMEA group were more satisfied with the nursing service compared with the patients in the control group.Conclusion:The application of the FMEA in elderly patients undergoing femoral fracture surgery has demonstrated its potential to prevent the incidence of DVT,lower RPN values,and improve nursing satisfaction.展开更多
We present the numerical simulation results of a model granular assembly formed by spherical particles with tIertzian interaction subjected to a simple shear in the athermal quasi-static limit. The stress-strain curve...We present the numerical simulation results of a model granular assembly formed by spherical particles with tIertzian interaction subjected to a simple shear in the athermal quasi-static limit. The stress-strain curve is shown to separate into smooth, elastic branches followed by a subsequent plastic event. Mode analysis shows that the lowest-frequency vibrational mode is more localized, and eigenvalues and participation ratios of low- frequency modes exhibit similar power-law behavior as the system approaches plastic instability, indicating that the nature of plastic events in the granular system is also a saddle node bifurcation. The analysis of projection and spatial structure shows that over 75% contributions to the non-affine displacement field at a plastic instability come from the lowest-frequency mode, and the lowest-frequency mode is strongly spatially correlated with local plastic rearrangements, inferring that the lowest-frequency mode could be used as a predictor for future plastic rearrangements in the disordered system jammed marginally.展开更多
The failure modes and effects analysis （FMEA） is widely applied in manufacturing industries in various phases of the product life cycle to evaluate the system, its design and processes for failures that can occur. T...The failure modes and effects analysis （FMEA） is widely applied in manufacturing industries in various phases of the product life cycle to evaluate the system, its design and processes for failures that can occur. The FMEA team often demonstrates different opinions and these different types of opinions are very difficult to incorporate into the FMEA by the traditional risk priority number model. In this paper, for each of the Occurrence, Severity and Detectivity parameters a fuzzy set is defined and the opinion of each FMEA team members is considered. These opinions are considered simultaneously with weights that are given to each individual based on their skills and experience levels. In addition, the opinion of the costumer is considered for each of the FMEA parameters. Then, the Risk Priority Numbers （RPN） is calculated using a Multi Input Single Output （MISO） fuzzy expert system. The proposed model is applied for prioritizing the failures of Peugeot 206 Engine assembly line in IKCo （Iran Khodro Company）.展开更多
Target motion modes have a close relationship with the relative orientation of missile-totarget in three-dimensional highly maneuvering target interception. From the perspective of relationship between the sensor coor...Target motion modes have a close relationship with the relative orientation of missile-totarget in three-dimensional highly maneuvering target interception. From the perspective of relationship between the sensor coordinate system and the target body coordinate system, a basic model of sensor is stated and the definition of relative angular velocity between the two coordinate systems is introduced firstly. Then, the three-dimensional analytic expressions of relative angular velocity for different motion modes are derived and simplified by analyzing the influences of target centroid motion, rotation around centroid and relative motion. Finally, the relationships of the relative angular velocity directions and values with motion modes are discussed. Simulation results validate the rationality of the theoretical analysis. It is demonstrated that there are significant differences of the relative orientation in different motion modes which include luxuriant information about motion modes. The conclusions are significant for the research of motion mode identification,maneuver detection, maneuvering target tracking and interception using target signatures.展开更多
BACKGROUND Utilizing failure mode and effects analysis(FMEA)in operating room nursing provides valuable insights for the care of patients undergoing radical gastric cancer surgery.AIM To evaluate the impact of FMEA on...BACKGROUND Utilizing failure mode and effects analysis(FMEA)in operating room nursing provides valuable insights for the care of patients undergoing radical gastric cancer surgery.AIM To evaluate the impact of FMEA on the risk of adverse events and nursing-care quality in patients undergoing radical surgery.METHODS Among 230 patients receiving radical cancer surgery between May 2019 and May 2024,115 were assigned to a control group that received standard intraoperative thermoregulation,while the observation group benefited from FMEA-modeled operating room care.Clinical indicators,stress responses,postoperative gastroin-testinal function recovery,nursing quality,and the incidence of adverse events were compared between the two groups.RESULTS Significant differences were observed in bed and hospital stay durations between the groups(P<0.05).There were no significant differences in intraoperative blood loss or postoperative body temperature(P>0.05).Stress scores improved in both groups post-nursing(P<0.05),with the observation group showing lower stress scores than the control group(P<0.05).Gastrointestinal function recovery and nursing quality scores also differed significantly(P<0.05).Additionally,the incidence of adverse events such as stress injuries and surgical infections varied notably between the groups(P<0.05).CONCLUSION Incorporating FMEA into operating room nursing significantly enhances patient care by improving safety,expediting recovery,and reducing healthcare-associated risks.展开更多
Failure mode and effect analysis(FMEA)is a preven-tative risk evaluation method used to evaluate and eliminate fail-ure modes within a system.However,the traditional FMEA method exhibits many deficiencies that pose ch...Failure mode and effect analysis(FMEA)is a preven-tative risk evaluation method used to evaluate and eliminate fail-ure modes within a system.However,the traditional FMEA method exhibits many deficiencies that pose challenges in prac-tical applications.To improve the conventional FMEA,many modified FMEA models have been suggested.However,the majority of them inadequately address consensus issues and focus on achieving a complete ranking of failure modes.In this research,we propose a new FMEA approach that integrates a two-stage consensus reaching model and a density peak clus-tering algorithm for the assessment and clustering of failure modes.Firstly,we employ the interval 2-tuple linguistic vari-ables(I2TLVs)to express the uncertain risk evaluations provided by FMEA experts.Then,a two-stage consensus reaching model is adopted to enable FMEA experts to reach a consensus.Next,failure modes are categorized into several risk clusters using a density peak clustering algorithm.Finally,the proposed FMEA is illustrated by a case study of load-bearing guidance devices of subway systems.The results show that the proposed FMEA model can more easily to describe the uncertain risk information of failure modes by using the I2TLVs;the introduction of an endogenous feedback mechanism and an exogenous feedback mechanism can accelerate the process of consensus reaching;and the density peak clustering of failure modes successfully improves the practical applicability of FMEA.展开更多
[Objective] This study was to provide basis for the scientific management of land use in Haihe River Basin （HRB） through the quantitative exploration of the land use conversion, changes of intensity and spatial dist...[Objective] This study was to provide basis for the scientific management of land use in Haihe River Basin （HRB） through the quantitative exploration of the land use conversion, changes of intensity and spatial distribution in this region. [Method] With the support of remote sensing technology and geographic information technology, the land use maps of the study area in 40 years （1970-2010） were in- terpreted and plotted. Four kinds of tupu, namely, land use change tupu, process tupu, arising tupu and evolution mode tupu were built through the spatial overlay of the land use maps to analyze the change rules of land use patterns. [Result] The conversion of arable land to construction land was the main characteristics of land use changes in HRB for the 40 years; the area of non-stable region accounted for 35% of the total, indicating that the land use changed remarkably, thus, it was nec- essary to strengthen the scientific land management in HRB; the new conversions to all land use patterns were all the lowest in 1980-1990, indicating that land use changed slowly during this period. [Conclusion] The results indicate that, compared with conventional transfer matrix method, geo-information tupu has obvious advantage in analyzing land use changes that it can demonstrate the spatial distribution of interest region, display the multi-dimensional spatial information.展开更多
It has been well known that nozzle end-clearances in a Variable Nozzle Turbine（VNT）are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances ar...It has been well known that nozzle end-clearances in a Variable Nozzle Turbine（VNT）are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances are very hard due to thermal expansion. In this paper, both the different sizes of nozzle end-clearances and the various ratios of their distribution at the hub and shroud sides were modelled and investigated by performing 3D Computational Fluid Dynamics（CFD） and Finite Element Analysis（FEA） simulations with a code of transferring the aerodynamic pressure from the CFD results to the FEA calculations. It was found that increasing the size of the nozzle end-clearances divided equally at the hub and shroud sides deteriorates turbine efficiency and turbine wheel reliability, yet increases turbine flow capacity. And, when the total nozzle endclearances remain the same, varying nozzle end-clearances＇ distribution at the hub and shroud sides not only shifts operation point of a VNT turbine, but also affects the turbine wheel vibration stress.Compared with nozzle hub clearance, the shroud clearance is more sensitive to both aerodynamic performance and reliability of a VNT turbine. Consequently, a possibility is put forward to improve VNT turbine efficiency meanwhile decrease vibration stress by optimizing nozzle end-clearances＇ distribution.展开更多
BACKGROUND Craniocerebral injuries encompass brain injuries,skull fractures,cranial soft tissue injuries,and similar injuries.Recently,the incidence of craniocerebral injuries has increased dramatically due to the inc...BACKGROUND Craniocerebral injuries encompass brain injuries,skull fractures,cranial soft tissue injuries,and similar injuries.Recently,the incidence of craniocerebral injuries has increased dramatically due to the increased numbers of traffic accidents and aerial work injuries,threatening the physical and mental health of patients.AIM To investigate the impact of failure modes and effects analysis(FMEA)-based emergency management on craniocerebral injury treatment effectiveness.METHODS Eighty-four patients with craniocerebral injuries,treated at our hospital from November 2019 to March 2021,were selected and assigned,using the random number table method,to study(n=42)and control(n=42)groups.Patients in the control group received conventional management while those in the study group received FMEA theory-based emergency management,based on the control group.Pre-and post-interventions,details regarding the emergency situation;levels of inflammatory stress indicators[Interleukin-6(IL-6),C-reactive protein(CRP),and procalcitonin(PCT)];incidence of complications;prognoses;and satisfaction regarding patient care were evaluated for both groups.RESULTS For the study group,the assessed parameters[pre-hospital emergency response time(9.13±2.37 min),time to receive a consultation(2.39±0.44 min),time needed to report imaging findings(1.15±4.44 min),and test reporting time(32.19±6.23 min)]were shorter than those for the control group(12.78±4.06 min,3.58±0.71 min,33.49±5.51 min,50.41±11.45 min,respectively;P<0.05).Pre-intervention serum levels of IL-6(78.71±27.59 pg/mL),CRP(19.80±6.77 mg/L),and PCT(3.66±1.82 ng/mL)in the study group patients were not significantly different from those in the control group patients(81.31±32.11 pg/mL,21.29±8.02 mg/L,and 3.95±2.11 ng/mL respectively;P>0.05);post-intervention serum indicator levels were lower in both groups than pre-intervention levels.Further,serum levels of IL-6(17.35±5.33 pg/mL),CRP(2.27±0.56 mg/L),and PCT(0.22±0.07 ng/mL)were lower in the study group than in the control group(30.15±12.38 pg/mL,3.13±0.77 mg/L,0.38±0.12 ng/mL,respectively;P<0.05).The complication rate observed in the study group(9.52%)was lower than that in the control group(26.19%,P<0.05).The prognoses for the study group patients were better than those for the control patients(P<0.05).Patient care satisfaction was higher in the study group(95.24%)than in the control group(78.57%,P<0.05).CONCLUSION FMEA-based craniocerebral injury management effectively shortens the time spent on emergency care,reduces inflammatory stress and complication risk levels,and helps improve patient prognoses,while achieving high patient care satisfaction levels.展开更多
This paper aims to solve the resonance failure probability and develop an effective method to estimate the effects of variables and failure modes on failure probability of axially functionally graded material(FGM)pipe...This paper aims to solve the resonance failure probability and develop an effective method to estimate the effects of variables and failure modes on failure probability of axially functionally graded material(FGM)pipe conveying fluid.Correspondingly,the natural frequency of axially FGM pipes conveying fluid is calculated using the differential quadrature method(DQM).A variable sensitivity analysis(VSA)is introduced to measure the effect of each random variable,and a mode sensitivity analysis(MSA)is introduced to acquire the importance ranking of failure modes.Then,an active learning Kriging(ALK)method is established to calculate the resonance failure probability and sensitivity indices,which greatly improves the application of resonance reliability analysis for pipelines in engineering practice.Based on the resonance reliability analysis method,the effects of fluid velocity,volume fraction and fluid density of axially FGM pipe conveying fluid on resonance reliability are analyzed.The results demonstrate that the proposed method has great performance in the anti-resonance analysis of pipes conveying fluid.展开更多
In this study, analytical relations for evaluating the exact solution of natural fre- quency and mode shape of beams with embedded shape memory alloy （SMA） wires are presented. Beams are modeled according to Euler-B...In this study, analytical relations for evaluating the exact solution of natural fre- quency and mode shape of beams with embedded shape memory alloy （SMA） wires are presented. Beams are modeled according to Euler-Bernoulli, Timoshenko and third order beam （Reddy） the- ories. A relation is obtained for determining the effect of axial load generated by the recovery action of pre-strained SMA wires. By defining some dimensionless quantities~ the effect of different me- chanical properties on the frequencies and mode shapes of the system are carefully examined. The effect of axial load generated by SMA wires with buckling load and frequency jump is accurately studied.展开更多
The Fourier p-element method is an improvement to the finite element method,and is particularly suitable for vibration analysis due to the well-behaved Fourier series.In this paper,an iteration procedure is presented ...The Fourier p-element method is an improvement to the finite element method,and is particularly suitable for vibration analysis due to the well-behaved Fourier series.In this paper,an iteration procedure is presented for solving the resulting nonlinear eigenvalue problem.Three types of Fourier version shape functions are constructed for analyzing the circular shaft torsional vibration,the plate in-plane vibration and annular plate flexural vibration modes,respectively. The numerical results show that this method can achieve higher accuracy and converge much faster than the FEM based on polynomial interpolation,especially for higher mode analysis.展开更多
Elementary flux mode （EFM） analysis was used in the metabolic analysis of central carbon metabolism in Saccharomyces cerevisiae based on constructed cellular network. Calculated from the metabolic model, the ethanol...Elementary flux mode （EFM） analysis was used in the metabolic analysis of central carbon metabolism in Saccharomyces cerevisiae based on constructed cellular network. Calculated from the metabolic model, the ethanol-producing pathway No. 37 furthest converts the substrate into ethanol among the 78 elementary flux modes. The in silico metabolic phenotypes predicted based on this analysis fit well with the fermentation performance of the engineered strains, KAM3 and KAMll, which confirmed that EFM analysis is valid to direct the construction of Saccharomyces cerevisiae engineered strains, to increase the ethanol yield.展开更多
Normal mode analysis in dihedral angle space was carried out on two X ray crystal structures and one model structure responded to the same sequence of duplex DNA: d(CGCGAATTCGCG). Comparing these results indicates th...Normal mode analysis in dihedral angle space was carried out on two X ray crystal structures and one model structure responded to the same sequence of duplex DNA: d(CGCGAATTCGCG). Comparing these results indicates that it is reliable and meaningful to carry out normal mode analysis on model structures. The reliability is greater except for the ends of helix.展开更多
Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate compon...Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.展开更多
The multivariate statistical analysis is profitably applicable to the study of conodont multielement taxonomy.R- mode duster analyses of quantitative and 0-1 data are carried out here to classify more than 6000 discre...The multivariate statistical analysis is profitably applicable to the study of conodont multielement taxonomy.R- mode duster analyses of quantitative and 0-1 data are carried out here to classify more than 6000 discrete Lower Triassic conodont specimens belonging to 108 kinds of conodont elements from Western Guangxi . The results of R-mode cluster analysis reveal more directly the relationship among many isolated conodont elements , and they also prove that the results of the logical inference are basically correct,i.e. 108 kinds of conodont elements can be identified into 32 species belonging to 11 genera of conodonts . The application of R- mode duster analysis multielement taxonomy by the method . has brought about 4 significant conclusions , which can be used by conodont researchers as reference .展开更多
In this paper,an efficien formulation based on the Lagrangian method is presented to investigate the contact–impact problems of f exible multi-body systems.Generally,the penalty method and the Hertz contact law are t...In this paper,an efficien formulation based on the Lagrangian method is presented to investigate the contact–impact problems of f exible multi-body systems.Generally,the penalty method and the Hertz contact law are the most commonly used methods in engineering applications.However,these methods are highly dependent on various non-physical parameters,which have great effects on the simulation results.Moreover,a tremendous number of degrees of freedom in the contact–impact problems will influenc thenumericalefficien ysignificantl.Withtheconsideration of these two problems,a formulation combining the component mode synthesis method and the Lagrangian method is presented to investigate the contact–impact problems in fl xible multi-body system numerically.Meanwhile,the finit element meshing laws of the contact bodies will be studied preliminarily.A numerical example with experimental verificatio will certify the reliability of the presented formulationincontact–impactanalysis.Furthermore,aseries of numerical investigations explain how great the influenc of the finit element meshing has on the simulation results.Finally the limitations of the element size in different regions are summarized to satisfy both the accuracy and efficien y.展开更多
Discrete models such as the lumped parameter model and the finite element model are widely used in the solution of soil amplification of earthquakes. However, neither of the models will accurately estimate the natural...Discrete models such as the lumped parameter model and the finite element model are widely used in the solution of soil amplification of earthquakes. However, neither of the models will accurately estimate the natural frequencies of soil deposit, nor simulate a damping of frequency independence. This research develops a new discrete model for onedimensional viscoelastic response analysis of layered soil deposit based on the mode equivalence method. The new discrete model is a one-dimensional equivalent multi-degree-of-freedom（MDOF） system characterized by a series of concentrated masses, springs and dashpots with a special configuration. The dynamic response of the equivalent MDOF system is analytically derived and the physical parameters are formulated in terms of modal properties. The equivalent MDOF system is verified through a comparison of amplification functions with the available theoretical solutions. The appropriate number of degrees of freedom（DOFs） in the equivalent MDOF system is estimated. A comparative study of the equivalent MDOF system with the existing discrete models is performed. It is shown that the proposed equivalent MDOF system can exactly present the natural frequencies and the hysteretic damping of soil deposits and provide more accurate results with fewer DOFs.展开更多
The recognition and management of risk in donation process and blood product is critical to ensure donor and patient safety. To achieve this goal, the failure mode and effects analysis (FMEA) is a convenient method;mo...The recognition and management of risk in donation process and blood product is critical to ensure donor and patient safety. To achieve this goal, the failure mode and effects analysis (FMEA) is a convenient method;moreover it was used to prevent the occurrence of adverse events and look at what could go strong at each step. This study aimed to utilize FMEA in central blood bank in Khartoum to evaluate the potential risk and adverse event that may occur during the donation process. According to the severity, occurrence and the detection of each failure mode, the risk priority number (RPN) was calculated to determine which of the failures should take priority to find a solution and applying corrective action to reduce the failure risk. The statistical package for social sciences (SPSS) version 11 was used as descriptive and analytical statistics tool. The FMEA technique provides a systematic method for finding vulnerabilities in a process before they result in an error, and in this study a satisfactory outcome was reached.展开更多
基金supported by the National Natural Science Foundation of China(No.52075414)the China Postdoctoral Science Foundation(No.2021M702595)the China Scholarship Council。
文摘Acoustic Mode Analysis(AMA)for aero-engines can offer valuable insights for the design of silent engines as well as for fault diagnosis.Commonly,this is done in the(spatial)Fourier domain,necessitating the use of multiple uniformly spaced microphones to ensure adequate resolution.Recent works show that sub-Nyquist estimation is feasible using sparse reconstruction frameworks,although such modelling generally introduces an estimation bias that has to be compensated for.Moreover,there is a growing interest in monitoring mode amplitude over continuous time,as it can offer crucial insights for diagnosing operational conditions.In this work,we introduce a Block Orthogonal Matching Pursuit(BOMP)method for continuous time mode analysis,exploiting the underlying structural sparsity of the signal model.Specifically,the(pseudo)‘0ànorm penalty is employed to induce sparsity in the wavenumber domain,whereas a block structure is imposed as a constraint to monitor the amplitude variation in the time domain.The effectiveness of the BOMP is evaluated using both numerical simulations and experimental measurements,indicating the proposed method's preferable performance as compared to the classic Least Absolute Shrinkage and Selection Operator(LASSO)and Orthogonal Matching Pursuit(OMP)methods.
文摘Purpose:To evaluate the effects of healthcare failure mode and effect analysis(FMEA)on the prevention of deep venous thrombosis(DVT)in elderly patients undergoing femoral fracture surgery.Methods:Eighty elderly patients undergoing femoral fracture surgery who did not apply FMEA in Suzhou BenQ Medical Center from June 1,2022 to May 31,2023 were selected as the control group.According to the equal group experiment method,80 elderly patients who were managed using FMEA from June 1,2023 to May 31,2024 were selected as the FMEA group.The control group received traditional nursing management,while the FMEA group applied FMEA to analyze failure causes,calculate Risk Priority Numbers(RPNs),identify failure modes with higher RPNs,analyze the influencing factors,develop improvement measures,and optimize processes.The RPN values and the incidence of DVT,as well as nursing satisfaction scores,were compared in the two groups.Results:Compared with the control group,the total RPN values of the FEMA group decreased significantly,with a reduction rate of 87.0%.Besides,the incidence of DVT was 1.3%in the FMEA group,lower than 10.0%in the control group(8/80).What’s more,the patients in the FMEA group were more satisfied with the nursing service compared with the patients in the control group.Conclusion:The application of the FMEA in elderly patients undergoing femoral fracture surgery has demonstrated its potential to prevent the incidence of DVT,lower RPN values,and improve nursing satisfaction.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11272048 and 51239006the European Commission Marie Curie Actions under Grant No IRSES-294976
文摘We present the numerical simulation results of a model granular assembly formed by spherical particles with tIertzian interaction subjected to a simple shear in the athermal quasi-static limit. The stress-strain curve is shown to separate into smooth, elastic branches followed by a subsequent plastic event. Mode analysis shows that the lowest-frequency vibrational mode is more localized, and eigenvalues and participation ratios of low- frequency modes exhibit similar power-law behavior as the system approaches plastic instability, indicating that the nature of plastic events in the granular system is also a saddle node bifurcation. The analysis of projection and spatial structure shows that over 75% contributions to the non-affine displacement field at a plastic instability come from the lowest-frequency mode, and the lowest-frequency mode is strongly spatially correlated with local plastic rearrangements, inferring that the lowest-frequency mode could be used as a predictor for future plastic rearrangements in the disordered system jammed marginally.
文摘The failure modes and effects analysis （FMEA） is widely applied in manufacturing industries in various phases of the product life cycle to evaluate the system, its design and processes for failures that can occur. The FMEA team often demonstrates different opinions and these different types of opinions are very difficult to incorporate into the FMEA by the traditional risk priority number model. In this paper, for each of the Occurrence, Severity and Detectivity parameters a fuzzy set is defined and the opinion of each FMEA team members is considered. These opinions are considered simultaneously with weights that are given to each individual based on their skills and experience levels. In addition, the opinion of the costumer is considered for each of the FMEA parameters. Then, the Risk Priority Numbers （RPN） is calculated using a Multi Input Single Output （MISO） fuzzy expert system. The proposed model is applied for prioritizing the failures of Peugeot 206 Engine assembly line in IKCo （Iran Khodro Company）.
基金supported by the Specialized Research Fund for the Doctoral Program of China Higher Education (No. 20134307110012)the National Natural Science Foundation of China (No. 61101186)
文摘Target motion modes have a close relationship with the relative orientation of missile-totarget in three-dimensional highly maneuvering target interception. From the perspective of relationship between the sensor coordinate system and the target body coordinate system, a basic model of sensor is stated and the definition of relative angular velocity between the two coordinate systems is introduced firstly. Then, the three-dimensional analytic expressions of relative angular velocity for different motion modes are derived and simplified by analyzing the influences of target centroid motion, rotation around centroid and relative motion. Finally, the relationships of the relative angular velocity directions and values with motion modes are discussed. Simulation results validate the rationality of the theoretical analysis. It is demonstrated that there are significant differences of the relative orientation in different motion modes which include luxuriant information about motion modes. The conclusions are significant for the research of motion mode identification,maneuver detection, maneuvering target tracking and interception using target signatures.
文摘BACKGROUND Utilizing failure mode and effects analysis(FMEA)in operating room nursing provides valuable insights for the care of patients undergoing radical gastric cancer surgery.AIM To evaluate the impact of FMEA on the risk of adverse events and nursing-care quality in patients undergoing radical surgery.METHODS Among 230 patients receiving radical cancer surgery between May 2019 and May 2024,115 were assigned to a control group that received standard intraoperative thermoregulation,while the observation group benefited from FMEA-modeled operating room care.Clinical indicators,stress responses,postoperative gastroin-testinal function recovery,nursing quality,and the incidence of adverse events were compared between the two groups.RESULTS Significant differences were observed in bed and hospital stay durations between the groups(P<0.05).There were no significant differences in intraoperative blood loss or postoperative body temperature(P>0.05).Stress scores improved in both groups post-nursing(P<0.05),with the observation group showing lower stress scores than the control group(P<0.05).Gastrointestinal function recovery and nursing quality scores also differed significantly(P<0.05).Additionally,the incidence of adverse events such as stress injuries and surgical infections varied notably between the groups(P<0.05).CONCLUSION Incorporating FMEA into operating room nursing significantly enhances patient care by improving safety,expediting recovery,and reducing healthcare-associated risks.
基金supported by the Fundamental Research Funds for the Central Universities(22120240094)Humanities and Social Science Fund of Ministry of Education China(22YJA630082).
文摘Failure mode and effect analysis(FMEA)is a preven-tative risk evaluation method used to evaluate and eliminate fail-ure modes within a system.However,the traditional FMEA method exhibits many deficiencies that pose challenges in prac-tical applications.To improve the conventional FMEA,many modified FMEA models have been suggested.However,the majority of them inadequately address consensus issues and focus on achieving a complete ranking of failure modes.In this research,we propose a new FMEA approach that integrates a two-stage consensus reaching model and a density peak clus-tering algorithm for the assessment and clustering of failure modes.Firstly,we employ the interval 2-tuple linguistic vari-ables(I2TLVs)to express the uncertain risk evaluations provided by FMEA experts.Then,a two-stage consensus reaching model is adopted to enable FMEA experts to reach a consensus.Next,failure modes are categorized into several risk clusters using a density peak clustering algorithm.Finally,the proposed FMEA is illustrated by a case study of load-bearing guidance devices of subway systems.The results show that the proposed FMEA model can more easily to describe the uncertain risk information of failure modes by using the I2TLVs;the introduction of an endogenous feedback mechanism and an exogenous feedback mechanism can accelerate the process of consensus reaching;and the density peak clustering of failure modes successfully improves the practical applicability of FMEA.
基金Supported by the Key Technology R&D Program of Hebei Province (10277105D)the Funds of the Chinese Academy of Sciences for Key Topics in Innovation Engineering(KSCX-EW-J-5)~~
文摘[Objective] This study was to provide basis for the scientific management of land use in Haihe River Basin （HRB） through the quantitative exploration of the land use conversion, changes of intensity and spatial distribution in this region. [Method] With the support of remote sensing technology and geographic information technology, the land use maps of the study area in 40 years （1970-2010） were in- terpreted and plotted. Four kinds of tupu, namely, land use change tupu, process tupu, arising tupu and evolution mode tupu were built through the spatial overlay of the land use maps to analyze the change rules of land use patterns. [Result] The conversion of arable land to construction land was the main characteristics of land use changes in HRB for the 40 years; the area of non-stable region accounted for 35% of the total, indicating that the land use changed remarkably, thus, it was nec- essary to strengthen the scientific land management in HRB; the new conversions to all land use patterns were all the lowest in 1980-1990, indicating that land use changed slowly during this period. [Conclusion] The results indicate that, compared with conventional transfer matrix method, geo-information tupu has obvious advantage in analyzing land use changes that it can demonstrate the spatial distribution of interest region, display the multi-dimensional spatial information.
基金co-supported by the Natural Science Foundation of Hebei Province of China(No.E2017402135)the Program of Science and Technology Research and Development of Handan of China(No.1621212047-2)
文摘It has been well known that nozzle end-clearances in a Variable Nozzle Turbine（VNT）are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances are very hard due to thermal expansion. In this paper, both the different sizes of nozzle end-clearances and the various ratios of their distribution at the hub and shroud sides were modelled and investigated by performing 3D Computational Fluid Dynamics（CFD） and Finite Element Analysis（FEA） simulations with a code of transferring the aerodynamic pressure from the CFD results to the FEA calculations. It was found that increasing the size of the nozzle end-clearances divided equally at the hub and shroud sides deteriorates turbine efficiency and turbine wheel reliability, yet increases turbine flow capacity. And, when the total nozzle endclearances remain the same, varying nozzle end-clearances＇ distribution at the hub and shroud sides not only shifts operation point of a VNT turbine, but also affects the turbine wheel vibration stress.Compared with nozzle hub clearance, the shroud clearance is more sensitive to both aerodynamic performance and reliability of a VNT turbine. Consequently, a possibility is put forward to improve VNT turbine efficiency meanwhile decrease vibration stress by optimizing nozzle end-clearances＇ distribution.
基金Supported by Basic Research on Medical and Health Application of the People's Livelihood Science and Technology Project of Suzhou Science and Technology Bureau,No.SYS2020102.
文摘BACKGROUND Craniocerebral injuries encompass brain injuries,skull fractures,cranial soft tissue injuries,and similar injuries.Recently,the incidence of craniocerebral injuries has increased dramatically due to the increased numbers of traffic accidents and aerial work injuries,threatening the physical and mental health of patients.AIM To investigate the impact of failure modes and effects analysis(FMEA)-based emergency management on craniocerebral injury treatment effectiveness.METHODS Eighty-four patients with craniocerebral injuries,treated at our hospital from November 2019 to March 2021,were selected and assigned,using the random number table method,to study(n=42)and control(n=42)groups.Patients in the control group received conventional management while those in the study group received FMEA theory-based emergency management,based on the control group.Pre-and post-interventions,details regarding the emergency situation;levels of inflammatory stress indicators[Interleukin-6(IL-6),C-reactive protein(CRP),and procalcitonin(PCT)];incidence of complications;prognoses;and satisfaction regarding patient care were evaluated for both groups.RESULTS For the study group,the assessed parameters[pre-hospital emergency response time(9.13±2.37 min),time to receive a consultation(2.39±0.44 min),time needed to report imaging findings(1.15±4.44 min),and test reporting time(32.19±6.23 min)]were shorter than those for the control group(12.78±4.06 min,3.58±0.71 min,33.49±5.51 min,50.41±11.45 min,respectively;P<0.05).Pre-intervention serum levels of IL-6(78.71±27.59 pg/mL),CRP(19.80±6.77 mg/L),and PCT(3.66±1.82 ng/mL)in the study group patients were not significantly different from those in the control group patients(81.31±32.11 pg/mL,21.29±8.02 mg/L,and 3.95±2.11 ng/mL respectively;P>0.05);post-intervention serum indicator levels were lower in both groups than pre-intervention levels.Further,serum levels of IL-6(17.35±5.33 pg/mL),CRP(2.27±0.56 mg/L),and PCT(0.22±0.07 ng/mL)were lower in the study group than in the control group(30.15±12.38 pg/mL,3.13±0.77 mg/L,0.38±0.12 ng/mL,respectively;P<0.05).The complication rate observed in the study group(9.52%)was lower than that in the control group(26.19%,P<0.05).The prognoses for the study group patients were better than those for the control patients(P<0.05).Patient care satisfaction was higher in the study group(95.24%)than in the control group(78.57%,P<0.05).CONCLUSION FMEA-based craniocerebral injury management effectively shortens the time spent on emergency care,reduces inflammatory stress and complication risk levels,and helps improve patient prognoses,while achieving high patient care satisfaction levels.
基金The funding was provided by Laboratory Fund (Grant No.SYJJ200320).
文摘This paper aims to solve the resonance failure probability and develop an effective method to estimate the effects of variables and failure modes on failure probability of axially functionally graded material(FGM)pipe conveying fluid.Correspondingly,the natural frequency of axially FGM pipes conveying fluid is calculated using the differential quadrature method(DQM).A variable sensitivity analysis(VSA)is introduced to measure the effect of each random variable,and a mode sensitivity analysis(MSA)is introduced to acquire the importance ranking of failure modes.Then,an active learning Kriging(ALK)method is established to calculate the resonance failure probability and sensitivity indices,which greatly improves the application of resonance reliability analysis for pipelines in engineering practice.Based on the resonance reliability analysis method,the effects of fluid velocity,volume fraction and fluid density of axially FGM pipe conveying fluid on resonance reliability are analyzed.The results demonstrate that the proposed method has great performance in the anti-resonance analysis of pipes conveying fluid.
文摘In this study, analytical relations for evaluating the exact solution of natural fre- quency and mode shape of beams with embedded shape memory alloy （SMA） wires are presented. Beams are modeled according to Euler-Bernoulli, Timoshenko and third order beam （Reddy） the- ories. A relation is obtained for determining the effect of axial load generated by the recovery action of pre-strained SMA wires. By defining some dimensionless quantities~ the effect of different me- chanical properties on the frequencies and mode shapes of the system are carefully examined. The effect of axial load generated by SMA wires with buckling load and frequency jump is accurately studied.
文摘The Fourier p-element method is an improvement to the finite element method,and is particularly suitable for vibration analysis due to the well-behaved Fourier series.In this paper,an iteration procedure is presented for solving the resulting nonlinear eigenvalue problem.Three types of Fourier version shape functions are constructed for analyzing the circular shaft torsional vibration,the plate in-plane vibration and annular plate flexural vibration modes,respectively. The numerical results show that this method can achieve higher accuracy and converge much faster than the FEM based on polynomial interpolation,especially for higher mode analysis.
基金Supported by the National Natural Science Foundation of China （No.2002AA647040）
文摘Elementary flux mode （EFM） analysis was used in the metabolic analysis of central carbon metabolism in Saccharomyces cerevisiae based on constructed cellular network. Calculated from the metabolic model, the ethanol-producing pathway No. 37 furthest converts the substrate into ethanol among the 78 elementary flux modes. The in silico metabolic phenotypes predicted based on this analysis fit well with the fermentation performance of the engineered strains, KAM3 and KAMll, which confirmed that EFM analysis is valid to direct the construction of Saccharomyces cerevisiae engineered strains, to increase the ethanol yield.
文摘Normal mode analysis in dihedral angle space was carried out on two X ray crystal structures and one model structure responded to the same sequence of duplex DNA: d(CGCGAATTCGCG). Comparing these results indicates that it is reliable and meaningful to carry out normal mode analysis on model structures. The reliability is greater except for the ends of helix.
基金Supported by National Natural Science Foundation of China(Grant Nos.51135003,51205050,U1234208)Key National Science & Technology Special Project on"High-Grade CNC Machine Tools and Basic Manufacturing Equipments"(Grant No.2013ZX04011011)+1 种基金Research Fund for the Doctoral Program of Higher Education of China(Grant No.20110042120020)Fundamental Research Funds for the Central
文摘Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.
文摘The multivariate statistical analysis is profitably applicable to the study of conodont multielement taxonomy.R- mode duster analyses of quantitative and 0-1 data are carried out here to classify more than 6000 discrete Lower Triassic conodont specimens belonging to 108 kinds of conodont elements from Western Guangxi . The results of R-mode cluster analysis reveal more directly the relationship among many isolated conodont elements , and they also prove that the results of the logical inference are basically correct,i.e. 108 kinds of conodont elements can be identified into 32 species belonging to 11 genera of conodonts . The application of R- mode duster analysis multielement taxonomy by the method . has brought about 4 significant conclusions , which can be used by conodont researchers as reference .
基金supported by the National Science Foundation of China (Grants 11132007,11272203)
文摘In this paper,an efficien formulation based on the Lagrangian method is presented to investigate the contact–impact problems of f exible multi-body systems.Generally,the penalty method and the Hertz contact law are the most commonly used methods in engineering applications.However,these methods are highly dependent on various non-physical parameters,which have great effects on the simulation results.Moreover,a tremendous number of degrees of freedom in the contact–impact problems will influenc thenumericalefficien ysignificantl.Withtheconsideration of these two problems,a formulation combining the component mode synthesis method and the Lagrangian method is presented to investigate the contact–impact problems in fl xible multi-body system numerically.Meanwhile,the finit element meshing laws of the contact bodies will be studied preliminarily.A numerical example with experimental verificatio will certify the reliability of the presented formulationincontact–impactanalysis.Furthermore,aseries of numerical investigations explain how great the influenc of the finit element meshing has on the simulation results.Finally the limitations of the element size in different regions are summarized to satisfy both the accuracy and efficien y.
基金National Natural Science Foundation of China(51208296&51478343)Shanghai Committee of Science and Technology(13231200503)+2 种基金Fundamental Research Funds for the Central Universities(2013KJ095&101201438)Shanghai Educational Development Foundation(13CG17)National Key Technology R&D Program(2012BAK24B04)
文摘Discrete models such as the lumped parameter model and the finite element model are widely used in the solution of soil amplification of earthquakes. However, neither of the models will accurately estimate the natural frequencies of soil deposit, nor simulate a damping of frequency independence. This research develops a new discrete model for onedimensional viscoelastic response analysis of layered soil deposit based on the mode equivalence method. The new discrete model is a one-dimensional equivalent multi-degree-of-freedom（MDOF） system characterized by a series of concentrated masses, springs and dashpots with a special configuration. The dynamic response of the equivalent MDOF system is analytically derived and the physical parameters are formulated in terms of modal properties. The equivalent MDOF system is verified through a comparison of amplification functions with the available theoretical solutions. The appropriate number of degrees of freedom（DOFs） in the equivalent MDOF system is estimated. A comparative study of the equivalent MDOF system with the existing discrete models is performed. It is shown that the proposed equivalent MDOF system can exactly present the natural frequencies and the hysteretic damping of soil deposits and provide more accurate results with fewer DOFs.
文摘The recognition and management of risk in donation process and blood product is critical to ensure donor and patient safety. To achieve this goal, the failure mode and effects analysis (FMEA) is a convenient method;moreover it was used to prevent the occurrence of adverse events and look at what could go strong at each step. This study aimed to utilize FMEA in central blood bank in Khartoum to evaluate the potential risk and adverse event that may occur during the donation process. According to the severity, occurrence and the detection of each failure mode, the risk priority number (RPN) was calculated to determine which of the failures should take priority to find a solution and applying corrective action to reduce the failure risk. The statistical package for social sciences (SPSS) version 11 was used as descriptive and analytical statistics tool. The FMEA technique provides a systematic method for finding vulnerabilities in a process before they result in an error, and in this study a satisfactory outcome was reached.
