Background: This experiment was conducted to study the effect of different feed enzymes(phytase,xylanase,β-glucanase) on release rate of trace elements(Fe,Cu,Mn and Zn) in 6 commonly used feedstuffs(corn,wheat,barley...Background: This experiment was conducted to study the effect of different feed enzymes(phytase,xylanase,β-glucanase) on release rate of trace elements(Fe,Cu,Mn and Zn) in 6 commonly used feedstuffs(corn,wheat,barley,soybean meal,wheat bran,wheat middlings) by using an in vitro model,simulating the digestive processes in stomach for 2 h and then in small intestine for 6 h at 39 °C.Results: Phytase raised(P < 0.05) the release rate of Cu and Zn in corn,Cu,Zn and Mn in wheat,Cu in barley,Cu,Zn and Mn in soybean meal,Zn,Fe in wheat bran and Zn,Fe,Mn in wheat middlings.The release rate of various trace elements in feedstuffs was increased after xylanase addition.Compared with the control group,the release rate of soluble Cu in corn,wheat,barley and soybean meal,soluble Zn in corn,wheat and wheat middlings and soluble of Mn in corn,wheat,barley and wheat bran increased(P < 0.05) after xylanase treatment.After the treatment of β-glucanase,the release rate of soluble Cu in corn,wheat and wheat bran,soluble Fe in barley,soybean meal and wheat bran and soluble Mn in corn and wheat bran all increased(P < 0.05) compared with the control group.In each feedstuff,after corresponding enzyme treatment,the contents of phytic acid,xylan and β-glucan were significantly lower than those of the control group(P < 0.05).Conclusions: Results showed that bound trace elements in feedstuffs can be released by feed enzymes.It may be necessary to take the trace elements in feedstuffs into account in the actual feed preparation including feed enzymes.展开更多
Real vehicle tracking data play an important role in the research of routing in vehicle sensor networks. Most of the vehicle tracking data, however, were collected periodically and could not meet the requirements of r...Real vehicle tracking data play an important role in the research of routing in vehicle sensor networks. Most of the vehicle tracking data, however, were collected periodically and could not meet the requirements of real-time by many applications. Most of the existing trace interpolation algorithms use uniform interpolation methods and have low accuracy problem. From our observation, intersection vehicle status is critical to the vehicle movement. In this paper, we proposed a novel trace interpolation algorithm. Our algorithm used intersection vehicle movement modeling (IVMM) and velocity data mining (VDM) to assist the interpolation process. The algorithm is evaluated with real vehicle GPS data. Results show that our algorithm has much higher accuracy than traditional trace interpolation algorithms.展开更多
In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the cond...In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the condition of gentle breeze and normal forced ventilation in heading face using the particle tracking technology of computational fluid dynamics(CFD).The results show that air-flowing tendency in the same section presents great comparability in the period of gentle breeze and forced ventilation,and the difference mainly embodies in the different wind velocity.The influence of ventilation on the dispersion of droplets is faint under the gentle breeze condition.The droplet can be evenly distributed around the cutting head.However,under the normal forced ventilation,a large number of droplets will drift to the return air side.At the same time,droplet clusters are predominantly presented in the lower part of windward side and the middle of the leeward side around the cutting head.In contrast,the droplet concentration in other parts around cutting head decreases a lot and the droplets are unable to form close-grained mist curtain.So the dust escape channel is formed.In addition,the simulation results also reveal that the disturbance of air flow on the droplet distribution can be effectively relieved when using ventilation duct with Coanda effect(VDCE).Field experiment results show that the dust suppression efficiency of total dust and respirable dust increases respectively by 10.5%and 9.3%when using VDCE,which proves that it can weaken the influence of airflow on droplet dispersion.展开更多
Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulph...Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation（FGD）-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the p H and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the p H value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO2SO4, H2 Se, and HAs O2 are the aqueous complexes with the highest activities under acidic conditions.The speciation of Zn, Li, and Ni is not affected in spite of p H changes; these elements occur as free cations and associated to SO4 ^2 in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the p H of the FGD-gypsum leachates, which might be associated to the precipitation of Cu Se2 and Mo Se2, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.展开更多
In 5G era,it is expected to achieve wireless network coverage including offshore areas.Modeling of marine wireless channels is the basis of constructing a marine communication system.In this paper,a communication scen...In 5G era,it is expected to achieve wireless network coverage including offshore areas.Modeling of marine wireless channels is the basis of constructing a marine communication system.In this paper,a communication scene between an unmanned aerial vehicle(UAV)and a boat is simulated to study the marine wireless channel.Firstly,an improved spatial partitioning ray tracing algorithm is proposed to track the propagation path of electromagnetic waves at sea surface.Secondly,a mobile channel is simulated and modeled based on the track results.Finally,a loss measurement is carried out in the coastal waters based on the simple wireless channel loss measuring platform,and a path loss propagation model is built.Then we compare the actual measurement data with the simulation results and find that the two are have good consistency,which further verifies the reliability of the simulation.展开更多
This study shows that there are two regions with high trace metal concentrations in the Bohai Bay, China. The numerical hydrodynamic model coupled with geochemical analysis was applied to understand the mass transport...This study shows that there are two regions with high trace metal concentrations in the Bohai Bay, China. The numerical hydrodynamic model coupled with geochemical analysis was applied to understand the mass transport and sedimentation in the bay. The modeling results show that the two regions are located within the residual current vortexes. Results from the particle-tracking model indicate that the trace metals released from the land sources enter the regions and take a relatively long residence time in the vortexes. The sediment radionuclide data indicates that the two regions experienced continuous and high sedimentation, and trace metals are prone to deposit in the regions. The correlations among trace metals, residual currents and radionuclides data suggest that the tides are the governing factor controlling the distributions of the trace metals in the bay. The consistence among these results also supports the reliabilities of the numerical simulation results of water and trace metal transport in this study.展开更多
According to the theory of the stochastic trajectory model of particle in the gas-solid two-phase flows, the two-phase turbulence model between the blades in the inner cavity of the FW-Φ150 horizontal turbo classifie...According to the theory of the stochastic trajectory model of particle in the gas-solid two-phase flows, the two-phase turbulence model between the blades in the inner cavity of the FW-Φ150 horizontal turbo classifier was established, and the commonly-used PHOENICS code was adopted to carried out the numerical simulation. It was achieved the flow characteristics under a certain condition as well as the motion trace of particles with different diameters entering from certain initial location and passing through the flow field between the blades under the correspondent condition. This research method quite directly demonstrates the motion of particles. An experiment was executed to prove the accuracy of the results of numerical simulation.展开更多
A novel statistical angle-of-arrival (AOA) model for indoor geolocation applications is presented. The modeling approach focuses on the arrivals of the multipath components with respect to the line-of-sight (LOS) path...A novel statistical angle-of-arrival (AOA) model for indoor geolocation applications is presented. The modeling approach focuses on the arrivals of the multipath components with respect to the line-of-sight (LOS) path which is an important component especially when indoor geolocation applications are considered. The model is particularly important for indoor applications where AOA information could be utilized for tracking indirect paths to aid in precise ranging in harsh and dense multipath environments where LOS path might be blocked due to obstructions. The results have been obtained by a measurement calibrated ray-tracing (RT) tool.展开更多
Refractometric fiber optic sensors have a number of applications in industry due to advantages like remote sensing ability, compact size, easy to fit, etc. A refractometric sensor contains a pair of parallel fibers an...Refractometric fiber optic sensors have a number of applications in industry due to advantages like remote sensing ability, compact size, easy to fit, etc. A refractometric sensor contains a pair of parallel fibers and a gap between the sensor probe and reflector, wherein the liquid whose refractive index is to be measured is filled. This paper describes the importance of mathematical modeling of this sensor. Ray tracing approach is used to model the sensor mathematically. This mathematical model is generalized for any scenario which is useful to avoid tedious trial and error techniques to design the sensor prototype. Mathematical modelling is a useful tool to optimize the gap distance for a detection of refractive index of liquid. The model is developed and analyzed rigorously considering adulteration of diesel by kerosene where refractive index varies from 1.44 to 1.46. Simulation experiments are carried out to optimize the gap distance which is found to be 6.8 mm using both models. Experiments are carried out where sensor probe is fabricated and results are analyzed. It is observed that for suggested gap distance sensor output varies almost linear over the entire range.展开更多
Partitioning behavior between amphibole and silicate glass of thirty-three minor and trace elements(Sc,Ti, V, Cr, Co, Rb, Sr, P, Y, Zr, Nb, Cs, Ba, K, La, Ce, Pr,Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, Pb,...Partitioning behavior between amphibole and silicate glass of thirty-three minor and trace elements(Sc,Ti, V, Cr, Co, Rb, Sr, P, Y, Zr, Nb, Cs, Ba, K, La, Ce, Pr,Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, Pb,Th, and U) have been determined experimentally. Products of crystallization of hydrous basalt melts from 0.6 GPa/860 °C up to 2.6 GPa/970 °C were obtained in a multianvil apparatus. Major and trace element compositions of amphibole and glass were determined with a combination of electron microprobe and laser ablation inductively coupled plasma mass spectrometry. The main mineral phase is calcic amphibole, and the coexisting glass compositions are tonalite, granodiorite, and granite. The compatibility of rare earth elements increase at 915 °C and then decrease at 970 °C, but the compatibility of most of these elements shows a continued, significant increase with increasing pressure. For high-field strength elements, large ion lithophile elements, actinide compatibility decrease with increasing temperature or pressure, but transition metals show a continued increase in compatibility within the temperature–pressure conditions. From mathematical and graphical fitting, we determined best-fit values for the ideal ionic radius(r_0, 1.01–1.04 ?), the strain-free partitioncoefficient(D_0, 1.18–1.58), and apparent Young's modulus(E, 142–370 GPa) for the M4 site in amphibole according to the lattice strain model. The D_0^(M4) for rare earth elements rises at 915 °C and then drops at 970 °C at 0.6 GPa.However, the D_0^(M4) values are positively proportional to the pressure for rare earth elements in the amphibole-glass pairs at 0.6–2.6 GPa and 970 °C. Furthermore, the derived best-fit values for r_0^(M4) and E^(M4) are almost constant and trend to increase with rising temperature and pressure,respectively. The partition coefficient is distinctly different for different melt compositions. The rare earth elements become more enriched in amphibole if the quenched glass is granodiorite or granite compared to the tonalitic glasses.展开更多
A rapid and accurate method for two-point ray tracing in horizontally layered velocity model is presented in this paper. Numerical experiments show that this method provides stable and rapid convergence with high accu...A rapid and accurate method for two-point ray tracing in horizontally layered velocity model is presented in this paper. Numerical experiments show that this method provides stable and rapid convergence with high accuracies, regardless of various 1-D velocity structures, takeoff angles and epicentral distances. This two-point ray tracing method is compared with the pseudobending technique and the method advanced by Kim and Baag (2002). It turns out that the method in this paper is much more efficient and accurate than the pseudobending technique, but is only applicable to 1-D velocity model. Kim's method is equivalent to ours for cases without large takeoff angles, but it fails to work when the takeoff angle is close to 90°. On the other hand, the method presented in this paper is applicable to cases with any takeoff angles with rapid and accurate convergence. Therefore, this method is a good choice for two-point ray tracing problems in horizontally layered velocity model and is efficient enough to be applied to a wide range of seismic problems.展开更多
This paper presents a propagation model for land-mobile-satellite (LMS) wideband radio channel in built-up environment. The model characterizes the behavior of the radio channel, under shadowing and multipath effects ...This paper presents a propagation model for land-mobile-satellite (LMS) wideband radio channel in built-up environment. The model characterizes the behavior of the radio channel, under shadowing and multipath effects due to buildings, with variation of the elevation angle of the satellite. The wideband parameters (coherent bandwidth and time delay spreading) for LMS channel, in residential and urban environments, are computed. These parameters can be considered as a measure of the amount of ISI (inter-symbol interference) of the radio channel, which distorts the received signal and accordingly increases the bit error rate. The calculated values for these parameters using our model, show very good agreement with the corresponding measured ones, which accordingly shows the validity of the developed model for radio channel design in satellite mobile communication systems.展开更多
基金supported by the National Key R&D Program of China(No.2016YFD0501201)National Natural Sciences Foundation of China(No.31472102,No.31772607)Zhejiang Provincial Key Science Project(No.2015C03006)
文摘Background: This experiment was conducted to study the effect of different feed enzymes(phytase,xylanase,β-glucanase) on release rate of trace elements(Fe,Cu,Mn and Zn) in 6 commonly used feedstuffs(corn,wheat,barley,soybean meal,wheat bran,wheat middlings) by using an in vitro model,simulating the digestive processes in stomach for 2 h and then in small intestine for 6 h at 39 °C.Results: Phytase raised(P < 0.05) the release rate of Cu and Zn in corn,Cu,Zn and Mn in wheat,Cu in barley,Cu,Zn and Mn in soybean meal,Zn,Fe in wheat bran and Zn,Fe,Mn in wheat middlings.The release rate of various trace elements in feedstuffs was increased after xylanase addition.Compared with the control group,the release rate of soluble Cu in corn,wheat,barley and soybean meal,soluble Zn in corn,wheat and wheat middlings and soluble of Mn in corn,wheat,barley and wheat bran increased(P < 0.05) after xylanase treatment.After the treatment of β-glucanase,the release rate of soluble Cu in corn,wheat and wheat bran,soluble Fe in barley,soybean meal and wheat bran and soluble Mn in corn and wheat bran all increased(P < 0.05) compared with the control group.In each feedstuff,after corresponding enzyme treatment,the contents of phytic acid,xylan and β-glucan were significantly lower than those of the control group(P < 0.05).Conclusions: Results showed that bound trace elements in feedstuffs can be released by feed enzymes.It may be necessary to take the trace elements in feedstuffs into account in the actual feed preparation including feed enzymes.
文摘Real vehicle tracking data play an important role in the research of routing in vehicle sensor networks. Most of the vehicle tracking data, however, were collected periodically and could not meet the requirements of real-time by many applications. Most of the existing trace interpolation algorithms use uniform interpolation methods and have low accuracy problem. From our observation, intersection vehicle status is critical to the vehicle movement. In this paper, we proposed a novel trace interpolation algorithm. Our algorithm used intersection vehicle movement modeling (IVMM) and velocity data mining (VDM) to assist the interpolation process. The algorithm is evaluated with real vehicle GPS data. Results show that our algorithm has much higher accuracy than traditional trace interpolation algorithms.
基金supported by the Program for Postgraduates Research Innovation in University of Jiangsu Province of China (No.CXLX13_955)the National Natural Science Foundation of China (No.51104153)
文摘In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the condition of gentle breeze and normal forced ventilation in heading face using the particle tracking technology of computational fluid dynamics(CFD).The results show that air-flowing tendency in the same section presents great comparability in the period of gentle breeze and forced ventilation,and the difference mainly embodies in the different wind velocity.The influence of ventilation on the dispersion of droplets is faint under the gentle breeze condition.The droplet can be evenly distributed around the cutting head.However,under the normal forced ventilation,a large number of droplets will drift to the return air side.At the same time,droplet clusters are predominantly presented in the lower part of windward side and the middle of the leeward side around the cutting head.In contrast,the droplet concentration in other parts around cutting head decreases a lot and the droplets are unable to form close-grained mist curtain.So the dust escape channel is formed.In addition,the simulation results also reveal that the disturbance of air flow on the droplet distribution can be effectively relieved when using ventilation duct with Coanda effect(VDCE).Field experiment results show that the dust suppression efficiency of total dust and respirable dust increases respectively by 10.5%and 9.3%when using VDCE,which proves that it can weaken the influence of airflow on droplet dispersion.
文摘Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation（FGD）-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the p H and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the p H value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO2SO4, H2 Se, and HAs O2 are the aqueous complexes with the highest activities under acidic conditions.The speciation of Zn, Li, and Ni is not affected in spite of p H changes; these elements occur as free cations and associated to SO4 ^2 in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the p H of the FGD-gypsum leachates, which might be associated to the precipitation of Cu Se2 and Mo Se2, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.
基金National Natural Science Foundation of China(Grant number 61971365)National Natural Science Foundation of China(Grant number 61871339)+1 种基金National Natural Science Foundation of China(Grant number 61901403)Xiamen Science and Technology Plan Project(No.3502Z20183008).
文摘In 5G era,it is expected to achieve wireless network coverage including offshore areas.Modeling of marine wireless channels is the basis of constructing a marine communication system.In this paper,a communication scene between an unmanned aerial vehicle(UAV)and a boat is simulated to study the marine wireless channel.Firstly,an improved spatial partitioning ray tracing algorithm is proposed to track the propagation path of electromagnetic waves at sea surface.Secondly,a mobile channel is simulated and modeled based on the track results.Finally,a loss measurement is carried out in the coastal waters based on the simple wireless channel loss measuring platform,and a path loss propagation model is built.Then we compare the actual measurement data with the simulation results and find that the two are have good consistency,which further verifies the reliability of the simulation.
基金financially supported in part by the Key Program of Tianjin Natural Science Foundation(Grant No.16JCZDJC39400)the National Key Research and Development Program of China(Grant No.2016YFC0502204)+1 种基金the National Natural Science Foundation of China(Grant No.21501042)China Scholarship Council
文摘This study shows that there are two regions with high trace metal concentrations in the Bohai Bay, China. The numerical hydrodynamic model coupled with geochemical analysis was applied to understand the mass transport and sedimentation in the bay. The modeling results show that the two regions are located within the residual current vortexes. Results from the particle-tracking model indicate that the trace metals released from the land sources enter the regions and take a relatively long residence time in the vortexes. The sediment radionuclide data indicates that the two regions experienced continuous and high sedimentation, and trace metals are prone to deposit in the regions. The correlations among trace metals, residual currents and radionuclides data suggest that the tides are the governing factor controlling the distributions of the trace metals in the bay. The consistence among these results also supports the reliabilities of the numerical simulation results of water and trace metal transport in this study.
文摘According to the theory of the stochastic trajectory model of particle in the gas-solid two-phase flows, the two-phase turbulence model between the blades in the inner cavity of the FW-Φ150 horizontal turbo classifier was established, and the commonly-used PHOENICS code was adopted to carried out the numerical simulation. It was achieved the flow characteristics under a certain condition as well as the motion trace of particles with different diameters entering from certain initial location and passing through the flow field between the blades under the correspondent condition. This research method quite directly demonstrates the motion of particles. An experiment was executed to prove the accuracy of the results of numerical simulation.
文摘A novel statistical angle-of-arrival (AOA) model for indoor geolocation applications is presented. The modeling approach focuses on the arrivals of the multipath components with respect to the line-of-sight (LOS) path which is an important component especially when indoor geolocation applications are considered. The model is particularly important for indoor applications where AOA information could be utilized for tracking indirect paths to aid in precise ranging in harsh and dense multipath environments where LOS path might be blocked due to obstructions. The results have been obtained by a measurement calibrated ray-tracing (RT) tool.
文摘Refractometric fiber optic sensors have a number of applications in industry due to advantages like remote sensing ability, compact size, easy to fit, etc. A refractometric sensor contains a pair of parallel fibers and a gap between the sensor probe and reflector, wherein the liquid whose refractive index is to be measured is filled. This paper describes the importance of mathematical modeling of this sensor. Ray tracing approach is used to model the sensor mathematically. This mathematical model is generalized for any scenario which is useful to avoid tedious trial and error techniques to design the sensor prototype. Mathematical modelling is a useful tool to optimize the gap distance for a detection of refractive index of liquid. The model is developed and analyzed rigorously considering adulteration of diesel by kerosene where refractive index varies from 1.44 to 1.46. Simulation experiments are carried out to optimize the gap distance which is found to be 6.8 mm using both models. Experiments are carried out where sensor probe is fabricated and results are analyzed. It is observed that for suggested gap distance sensor output varies almost linear over the entire range.
基金financial support of the National Natural Science Foundation of China (Grant Nos. 41274105 and 41772043)the Joint Research Fund in Huge Scientific Equipment (U1632112) under cooperative agreement between NSFC and CAS+6 种基金the Chinese Academy of Sciences ‘‘Light of West China’’ Program (Dawei Fan, 2017)Youth Innovation Promotion Association CAS (Dawei Fan, 2018)the Strategic Priority Research Program (B) of the Chinese Academy of Sciences (XDB 18010401)the CPSF-CAS Joint Foundation for Excellent Postdoctoral Fellows (Grant No. 2017LH014)China Postdoctoral Science Foundation (Grant No. 2018M631104)the Guizhou Provincial Science and Technology Foundation (20171078)the Guizhou Institute of Technology Foundation (XJGC20130901)
文摘Partitioning behavior between amphibole and silicate glass of thirty-three minor and trace elements(Sc,Ti, V, Cr, Co, Rb, Sr, P, Y, Zr, Nb, Cs, Ba, K, La, Ce, Pr,Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, Pb,Th, and U) have been determined experimentally. Products of crystallization of hydrous basalt melts from 0.6 GPa/860 °C up to 2.6 GPa/970 °C were obtained in a multianvil apparatus. Major and trace element compositions of amphibole and glass were determined with a combination of electron microprobe and laser ablation inductively coupled plasma mass spectrometry. The main mineral phase is calcic amphibole, and the coexisting glass compositions are tonalite, granodiorite, and granite. The compatibility of rare earth elements increase at 915 °C and then decrease at 970 °C, but the compatibility of most of these elements shows a continued, significant increase with increasing pressure. For high-field strength elements, large ion lithophile elements, actinide compatibility decrease with increasing temperature or pressure, but transition metals show a continued increase in compatibility within the temperature–pressure conditions. From mathematical and graphical fitting, we determined best-fit values for the ideal ionic radius(r_0, 1.01–1.04 ?), the strain-free partitioncoefficient(D_0, 1.18–1.58), and apparent Young's modulus(E, 142–370 GPa) for the M4 site in amphibole according to the lattice strain model. The D_0^(M4) for rare earth elements rises at 915 °C and then drops at 970 °C at 0.6 GPa.However, the D_0^(M4) values are positively proportional to the pressure for rare earth elements in the amphibole-glass pairs at 0.6–2.6 GPa and 970 °C. Furthermore, the derived best-fit values for r_0^(M4) and E^(M4) are almost constant and trend to increase with rising temperature and pressure,respectively. The partition coefficient is distinctly different for different melt compositions. The rare earth elements become more enriched in amphibole if the quenched glass is granodiorite or granite compared to the tonalitic glasses.
基金National Natural Science Foundation of China (40074008 and 40134010).
文摘A rapid and accurate method for two-point ray tracing in horizontally layered velocity model is presented in this paper. Numerical experiments show that this method provides stable and rapid convergence with high accuracies, regardless of various 1-D velocity structures, takeoff angles and epicentral distances. This two-point ray tracing method is compared with the pseudobending technique and the method advanced by Kim and Baag (2002). It turns out that the method in this paper is much more efficient and accurate than the pseudobending technique, but is only applicable to 1-D velocity model. Kim's method is equivalent to ours for cases without large takeoff angles, but it fails to work when the takeoff angle is close to 90°. On the other hand, the method presented in this paper is applicable to cases with any takeoff angles with rapid and accurate convergence. Therefore, this method is a good choice for two-point ray tracing problems in horizontally layered velocity model and is efficient enough to be applied to a wide range of seismic problems.
文摘This paper presents a propagation model for land-mobile-satellite (LMS) wideband radio channel in built-up environment. The model characterizes the behavior of the radio channel, under shadowing and multipath effects due to buildings, with variation of the elevation angle of the satellite. The wideband parameters (coherent bandwidth and time delay spreading) for LMS channel, in residential and urban environments, are computed. These parameters can be considered as a measure of the amount of ISI (inter-symbol interference) of the radio channel, which distorts the received signal and accordingly increases the bit error rate. The calculated values for these parameters using our model, show very good agreement with the corresponding measured ones, which accordingly shows the validity of the developed model for radio channel design in satellite mobile communication systems.
