We present the approaches to implementing the k-√k L turbulence model within the framework of the high-order discontinuous Galerkin(DG)method.We use the DG discretization to solve the full Reynolds-averaged Navier-St...We present the approaches to implementing the k-√k L turbulence model within the framework of the high-order discontinuous Galerkin(DG)method.We use the DG discretization to solve the full Reynolds-averaged Navier-Stokes equations.In order to enhance the robustness of approaches,some effective techniques are designed.The HWENO(Hermite weighted essentially non-oscillatory)limiting strategy is adopted for stabilizing the turbulence model variable k.Modifications have been made to the model equation itself by using the auxiliary variable that is always positive.The 2nd-order derivatives of velocities required in computing the von Karman length scale are evaluated in a way to maintain the compactness of DG methods.Numerical results demonstrate that the approaches have achieved the desirable accuracy for both steady and unsteady turbulent simulations.展开更多
This paper examines the performance of an atmospheric general circulation model (AGCM) developed at the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of ...This paper examines the performance of an atmospheric general circulation model (AGCM) developed at the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics (LASG/IAP). It is a spectral model truncated at R42(2.8125°long×1.66°lat) resolution and with nine vertical levels, and referred to as R42L9/LASG hereafter. It is also the new version of atmospheric component model R15L9 of the global ocean-atmosphere-land system (GOALS/LASG). A 40-year simulation in which the model is forced with the climatological monthly mean sea surface temperature is compared with the 40-year (1958-97) U.S. National Center for Environmental Prediction (NGEP) global reanalysis and the 22-year (1979-2000) Xie-Arkin monthly precipitation climatology. The mean DJF and JJA geographical distributions of precipitation, sea level pressure, 500-hPa geopotential height, 850-hPa and 200-hPa zonal wind, and other fields averaged for the last 30-year integration of the R42L9 model are analyzed. Results show that the model reproduces well the observed basic patterns, particularly precipitation over the East Asian region. Comparing the new model with R15L9/LASG, the old version with coarse resolution (nearly 7.5°long×4.5°lat), shows an obvious improvement in the simulation of regional climate, especially precipitation. The weaknesses in simulation and future improvements of the model are also discussed.展开更多
Paleoclimate simulations usually require model runs over a very long time. The fast integration version of a state-of-the-art general circulation model （GCM）, which shares the same physical and dynamical processes b...Paleoclimate simulations usually require model runs over a very long time. The fast integration version of a state-of-the-art general circulation model （GCM）, which shares the same physical and dynamical processes but with reduced horizontal resolution and increased time step, is usually developed. In this study, we configure a fast version of an atmospheric GCM （AGCM）, the Grid Atmospheric Model of IAP/LASG （Institute of Atmospheric Physics/State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics）, at low resolution （GAMIL-L, hereafter）, and compare the simulation results with the NCEP/NCAR reanalysis and other data to examine its performance. GAMIL-L, which is derived from the original GAMIL, is a finite difference AGCM with 72 × 40 grids in longitude and latitude and 26 vertical levels. To validate the simulated climatology and variability, two runs were achieved. One was a 60-year control run with fixed climatological monthly sea surface temperature （SST） forcing, and the other was a 50-yr （1950-2000） integration with observational time-varying monthly SST forcing. Comparisons between these two cases and the reanalysis, including intra-seasonal and inter-annual variability are also presented. In addition, the differences between GAMIL-L and the original version of GAMIL are also investigated.The results show that GAMIL-L can capture most of the large-scale dynamical features of the atmosphere, especially in the tropics and mid latitudes, although a few deficiencies exist, such as the underestimated Hadley cell and thereby the weak strength of the Asia summer monsoon. However, the simulated mean states over high latitudes, especially over the polar regions, are not acceptable. Apart from dynamics, the thermodynamic features mainly depend upon the physical parameterization schemes. Since the physical package of GAMIL-L is exactly the same as the original high-resolution version of GAMIL, in which the NCAR Community Atmosphere Model （CAM2） physical package was used, there are only small differences between them in the precipitation and temperature fields. Because our goal is to develop a fast-running AGCM and employ it in the coupled climate system model of IAP/LASG for paleoclimate studies such as ENSO and Australia-Asia monsoon, particular attention has been paid to the model performances in the tropics. More model validations, such as those ran for the Southern Oscillation and South Asia monsoon, indicate that GAMIL-L is reasonably competent and valuable in this regard.展开更多
A hydraulic power unit （HPU） is the driving ＂heart＂ of deep-sea working equipment. It is critical to predict its dynamic performances in deep-water before being immerged in the seawater, while the experimental tes...A hydraulic power unit （HPU） is the driving ＂heart＂ of deep-sea working equipment. It is critical to predict its dynamic performances in deep-water before being immerged in the seawater, while the experimental tests by simulating deep-sea environment have many disadvantages, such as expensive cost, long test cycles, and difficult to achieve low-temperature simulation, which is only used as a supplementary means for confirmatory experiment. This paper proposes a novel theoretical approach based on the linear varying parameters （LVP） modeling to foresee the dynamic performances of the driving unit. Firstly, based on the varying environment features, dynamic expressions of the compressibility and viscosity of hydranlic oil are derived to reveal the fluid performances changing. Secondly, models of hydraulic system and electrical system are accomplished respectively through studying the control process and energy transfer, and then LVP models of the pressure and flow rate control is obtained through the electro-hydraulic models integration. Thirdly, dynamic characteristics of HPU are obtained by the model simulating within bounded closed sets of varying parameters. Finally, the developed HPU is tested in a deep-sea imitating hull, and the experimental results are well consistent with the theoretical analysis outcomes, which clearly declare that the LVP modeling is a rational way to foresee dynamic performances of HPU. The research approach and model analysis results can be applied to the predictions of working properties and product designs for other deep-sea hydraulic pump.展开更多
To quantify the relationships between rice plant architecture parameters and the corresponding organ biomass, and to research on functional structural plant models of rice plant, this paper presented a biomass-based m...To quantify the relationships between rice plant architecture parameters and the corresponding organ biomass, and to research on functional structural plant models of rice plant, this paper presented a biomass-based model of aboveground architectural parameters of rice （Oryza sativa L.） in the young seedling stage, designed to explain effects of cultivars and environmental conditions on rice aboveground morphogenesis at the individual leaf level. Various model variables, including biomass of blade and blade length, were parameterized for rice based on data derived from an outdoor experiment with rice cv. Liangyou 108, 86You 8, Nanjing 43, and Yangdao 6. The organ dimensions of rice aboveground were modelled taking corresponding organ biomass as an independent variable. Various variables in rice showed marked consistency in observation and simulation, suggesting possibilities for a general rice architectural model in the young seedling stage. Our descriptive model was suitable for our objective. However, they can set the stage for connection to physiological model via biomass and development of functional structural rice models （FSRM）, and start with the localized production and partitioning of assimilates as affected by abiotic growth factors. The finding of biomass-based rice architectural parameter models also can be used in morphological models of blade, sheath, and tiller of the other stages in rice life.展开更多
A new fuzzy modeling method, which based on L - R fuzzy number, is discussed in this paper. First, the fuzzy state equation model is constructed based on fuzzy state variable,fuzzy Input variable and fuzzy output vari...A new fuzzy modeling method, which based on L - R fuzzy number, is discussed in this paper. First, the fuzzy state equation model is constructed based on fuzzy state variable,fuzzy Input variable and fuzzy output variable whkh are represented by L - R fuzzy number. And then, identification of time - varying parameter in this model is discussed further. At the end, a simulated application is given to Indicate the effectiveness of this fuzzy modeling method.展开更多
Response surface methodology（RSM） is introduced into corrosion research as a tool to assess the effects of environmental factors and their interactions on corrosion behavior and establish a model for corrosion predi...Response surface methodology（RSM） is introduced into corrosion research as a tool to assess the effects of environmental factors and their interactions on corrosion behavior and establish a model for corrosion prediction in complex coupled environment（CCE）. In this study, a typical CCE, that is, the corrosion environment of pipelines in gas field is taken as an example. The effects of environmental factors such as chloride concentration, pH value and pressure as well as their interactions on critical pitting temperature（CPT） were evaluated, and a quadratic polynomial model was developed for corrosion prediction by RSM. The results showed that the model was excellent in corrosion prediction with R2= 0.9949. CPT was mostly affected by single environmental factor rather than interaction, and among the whole factors, chloride concentration was the most influential factor of CPT.展开更多
In the field of computer graphics, procedural modeling has proven useful for the generation of models of complex realistic objects and environment. In this paper, we present something about the procedural techniques a...In the field of computer graphics, procedural modeling has proven useful for the generation of models of complex realistic objects and environment. In this paper, we present something about the procedural techniques and its application on city modeling.展开更多
By use of self-consistent field Xα scattered-wave (SCF-Xα-SW) method, the electronic structure was calculated for four models of Ti4Al14X (X=Al, Fe, Ni and Cu) clusters. The Ti4Al14X cluster was developed based on L...By use of self-consistent field Xα scattered-wave (SCF-Xα-SW) method, the electronic structure was calculated for four models of Ti4Al14X (X=Al, Fe, Ni and Cu) clusters. The Ti4Al14X cluster was developed based on L12 Al3Ti-base intermetallic compound. The results are presented using the density of states (DOS) and one-electron properties, such as relative binding tendency between the atom and the model cluster, and hybrid bonding tendency between the alloying element and the host atoms. By comparing the four models of Ti4Al14X cluster, the effect of the Fe, Ni or Cu atom on the physical properties of Al3Ti-based L12 intermetallic compounds is analyzed. The results indicate that the addition of the Fe, Ni or Cu atom intensifies the relative binding tendency between Ti atom and Ti4Al14X cluster. It was found that the Fermi level (EF) lies in a maximum in the DOS for Ti4Al14Al cluster; on the contrary, the EF comes near a minimum tn the DOS for Ti4Al14X (X=Fe, Ni and Cu) cluster. Thus the L12 crystal structure for binary Al3Ti alloy is unstable, and the addition of the Fe, Ni or Cu atom to Al3Ti is benefical to stabilize L12 crystal structure. The calculation also shows that the Fe, Ni or Cu atom strengthens the hybrid bonding tendency between the central atom and the host atoms for Ti4Al14X cluster and thereby may lead to the constriction of the lattice of Al3Ti-base intermetallic compounds.展开更多
This study was aimed at establishing allometric models for estimating LA (Leaf Area) of eight Coffea arabica genotypes in Mana district of Jimma Zone Oromia Regional State, South Western Ethiopia (7°46'N, ...This study was aimed at establishing allometric models for estimating LA (Leaf Area) of eight Coffea arabica genotypes in Mana district of Jimma Zone Oromia Regional State, South Western Ethiopia (7°46'N, 36°0'E). Many Methodologies and instruments have been devised to facilitate measurement of leaf area. However, these methods are destructive, laborious and expensive. For modeling leaf area, leaf width, leaf length and leaf area of 1200 leaves (50 leaves for each genotype) was measured for model calibration and the respective measurements on 960 leaves were used for model validation. Linear measurement was taken from leaves and branch diameters of eight genotypes of C. arabica, cultivated in field following a randomized complete blocks design at three altitudes (High, Medium and Low) were evaluated to identify best option for input in the models, and to validate the method to estimate the leaf area. Linear and non-linear models were tested for their accuracy to predict leaf area of the eight C. arabica genotypes. The use of linear model resulted in high accuracy for all of the eight C. arabica genotypes. No significant effect of growing altitude and genotype was obtained among the slopes of the models. Therefore, one single model was fitted to the combined data of all genotypes at all altitudes (LA = 0.6434LW). Comparison between observed and predicted leaf area was made using this model in another independent dataset, conducted for model validation, exhibited a high degree of correlation (r = 0.98 - 0.99, P < 0. 01). The over or under estimation of the leaf area using this model ranges between 0.02% to 1.7% and this model is adequate to estimate the leaf area for the eight C. arabica genotypes. Hence, this model can be proposed to be reliably used and with this developed model, researchers can estimate the leaf area of newly released eight genotypes of C. arabica at different altitudes accurately.展开更多
To study the approximation of foreign currency option prices when the underlying assets＇ price dynamics are described by exponential Lévy processes, the convolution representations for option pricing formulas we...To study the approximation of foreign currency option prices when the underlying assets＇ price dynamics are described by exponential Lévy processes, the convolution representations for option pricing formulas were given, and then the fast Fourier transform （FFT） algorithm was used to get the approximate values of option prices. Finally, a numerical example was given to demonstrate the calculate steps to the option price by FFT.展开更多
The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-la...The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-lag (DPL) model. The analytical solutions for the displacements, stresses, temperature, diffusion concentration, and volume fraction field with different values of the magnetic field, the rotation, the gravity, and the initial stress are obtained and portrayed graphically. The results indicate that the effects of gravity, rotation, voids, diffusion, initial stress, and electromagnetic field are very pronounced on the physical properties of the material.展开更多
Repeated-batch and continuous production of L-lactic acid by immobilized Rhizopusoryzae with calcium alginate entrapment method in a three-phase fluidized-bed bioreactor was stud-ied.The operation conditions were opti...Repeated-batch and continuous production of L-lactic acid by immobilized Rhizopusoryzae with calcium alginate entrapment method in a three-phase fluidized-bed bioreactor was stud-ied.The operation conditions were optimized.The productivity based on total reactor volume wasabout 3 times higher than that with free cells in a traditional stirred tank bioreactor.A mathemat-ical model was proposed and the model predictions were in good agreement with the experimentaldat.展开更多
Fifty-three larch interspecific hybrid clones（Larix kaempferi × L.gmelini） and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were ＇S＇-shaped a...Fifty-three larch interspecific hybrid clones（Larix kaempferi × L.gmelini） and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were ＇S＇-shaped and 36 exhibited similar curves as the male parent.The coefficients of the logistic models were higher than 0.943,indicating that our results were effective in the simulation of the growth curves.ANOVA analysis showed significant differences in height of different clones （P／0.01）.Average date of maximum height growth was Day 173,and average duration of rapid growth lasted for 50 days.Annual average increase in height was 9.7cm d^（-1） and daily average increase was 0.2 cm.The ratio of GR to the total annual increase in height ranged from 51.2 to 68.8%,with the average being 59.8%.There was a positive correlation between k values and plant heights which benefited from the evaluation of early plant height.There was also a positive correlation between GR（growth stage）,GD（plant height） and annual increase in height.These results are informative to the evaluation of the elite clone selection and provide a theoretical basis for breeding and management.展开更多
The objective of this study was to assess soil tillage methods by years interaction for dry matter of plant yield of maize(Zea mays L.) grown in West Poland by the additive main effects and multiplicative interaction ...The objective of this study was to assess soil tillage methods by years interaction for dry matter of plant yield of maize(Zea mays L.) grown in West Poland by the additive main effects and multiplicative interaction model. The study comprised four soil tillage methods, analysed in 12 years through field trials arranged in a randomized complete block design, with four replicates. Dry matter of plant yield of the tested soil tillage methods varied from 86.7 dt ha(for no-plough tillage in 2005) to 246.4 dt ha(for complete conventional tillage in 2012), with an average of 146.6 dt ha. In the variance analysis, 49.07% of the total dry matter of plant yield variation was explained by years, 12.69% by differences between soil tillage methods, and 10.53% by soil tillage methods by years interaction. Dry matter of plant yield is highly influenced by soil tillage methods by years factors.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.92252201 and 11721202)the Fundamental Research Funds for the Central Universities.
文摘We present the approaches to implementing the k-√k L turbulence model within the framework of the high-order discontinuous Galerkin(DG)method.We use the DG discretization to solve the full Reynolds-averaged Navier-Stokes equations.In order to enhance the robustness of approaches,some effective techniques are designed.The HWENO(Hermite weighted essentially non-oscillatory)limiting strategy is adopted for stabilizing the turbulence model variable k.Modifications have been made to the model equation itself by using the auxiliary variable that is always positive.The 2nd-order derivatives of velocities required in computing the von Karman length scale are evaluated in a way to maintain the compactness of DG methods.Numerical results demonstrate that the approaches have achieved the desirable accuracy for both steady and unsteady turbulent simulations.
文摘This paper examines the performance of an atmospheric general circulation model (AGCM) developed at the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics (LASG/IAP). It is a spectral model truncated at R42(2.8125°long×1.66°lat) resolution and with nine vertical levels, and referred to as R42L9/LASG hereafter. It is also the new version of atmospheric component model R15L9 of the global ocean-atmosphere-land system (GOALS/LASG). A 40-year simulation in which the model is forced with the climatological monthly mean sea surface temperature is compared with the 40-year (1958-97) U.S. National Center for Environmental Prediction (NGEP) global reanalysis and the 22-year (1979-2000) Xie-Arkin monthly precipitation climatology. The mean DJF and JJA geographical distributions of precipitation, sea level pressure, 500-hPa geopotential height, 850-hPa and 200-hPa zonal wind, and other fields averaged for the last 30-year integration of the R42L9 model are analyzed. Results show that the model reproduces well the observed basic patterns, particularly precipitation over the East Asian region. Comparing the new model with R15L9/LASG, the old version with coarse resolution (nearly 7.5°long×4.5°lat), shows an obvious improvement in the simulation of regional climate, especially precipitation. The weaknesses in simulation and future improvements of the model are also discussed.
文摘Paleoclimate simulations usually require model runs over a very long time. The fast integration version of a state-of-the-art general circulation model （GCM）, which shares the same physical and dynamical processes but with reduced horizontal resolution and increased time step, is usually developed. In this study, we configure a fast version of an atmospheric GCM （AGCM）, the Grid Atmospheric Model of IAP/LASG （Institute of Atmospheric Physics/State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics）, at low resolution （GAMIL-L, hereafter）, and compare the simulation results with the NCEP/NCAR reanalysis and other data to examine its performance. GAMIL-L, which is derived from the original GAMIL, is a finite difference AGCM with 72 × 40 grids in longitude and latitude and 26 vertical levels. To validate the simulated climatology and variability, two runs were achieved. One was a 60-year control run with fixed climatological monthly sea surface temperature （SST） forcing, and the other was a 50-yr （1950-2000） integration with observational time-varying monthly SST forcing. Comparisons between these two cases and the reanalysis, including intra-seasonal and inter-annual variability are also presented. In addition, the differences between GAMIL-L and the original version of GAMIL are also investigated.The results show that GAMIL-L can capture most of the large-scale dynamical features of the atmosphere, especially in the tropics and mid latitudes, although a few deficiencies exist, such as the underestimated Hadley cell and thereby the weak strength of the Asia summer monsoon. However, the simulated mean states over high latitudes, especially over the polar regions, are not acceptable. Apart from dynamics, the thermodynamic features mainly depend upon the physical parameterization schemes. Since the physical package of GAMIL-L is exactly the same as the original high-resolution version of GAMIL, in which the NCAR Community Atmosphere Model （CAM2） physical package was used, there are only small differences between them in the precipitation and temperature fields. Because our goal is to develop a fast-running AGCM and employ it in the coupled climate system model of IAP/LASG for paleoclimate studies such as ENSO and Australia-Asia monsoon, particular attention has been paid to the model performances in the tropics. More model validations, such as those ran for the Southern Oscillation and South Asia monsoon, indicate that GAMIL-L is reasonably competent and valuable in this regard.
基金supported by the National High Technology Research and Development Program of China (863 Program,Grant Nos. 2006AA09Z226 and 2012AA091104)the Special Fund for Basic Scientific Research of Central Colleges,Chang’an University (Grant No. CHD2011JC151)
文摘A hydraulic power unit （HPU） is the driving ＂heart＂ of deep-sea working equipment. It is critical to predict its dynamic performances in deep-water before being immerged in the seawater, while the experimental tests by simulating deep-sea environment have many disadvantages, such as expensive cost, long test cycles, and difficult to achieve low-temperature simulation, which is only used as a supplementary means for confirmatory experiment. This paper proposes a novel theoretical approach based on the linear varying parameters （LVP） modeling to foresee the dynamic performances of the driving unit. Firstly, based on the varying environment features, dynamic expressions of the compressibility and viscosity of hydranlic oil are derived to reveal the fluid performances changing. Secondly, models of hydraulic system and electrical system are accomplished respectively through studying the control process and energy transfer, and then LVP models of the pressure and flow rate control is obtained through the electro-hydraulic models integration. Thirdly, dynamic characteristics of HPU are obtained by the model simulating within bounded closed sets of varying parameters. Finally, the developed HPU is tested in a deep-sea imitating hull, and the experimental results are well consistent with the theoretical analysis outcomes, which clearly declare that the LVP modeling is a rational way to foresee dynamic performances of HPU. The research approach and model analysis results can be applied to the predictions of working properties and product designs for other deep-sea hydraulic pump.
基金supported by the National High-Tech R&D Program of China(2006AA10Z230, 2006AA10Z219-1)the National Natural Science Foundation of China (31171455)+3 种基金the Jiangsu Province Agricultural Scientific Technology Innovation Fund,China (CX(10)221)the Jiangsu Province Postdoctoral Research Program, China (5910907)the No-Profit Industry(Meteorology) Research Program, China (GYHY201006027,GYHY201106027)the Jiangsu Government Scholar-ship for Overseas Studies, Jiangsu Academy of Agricultural Sciences Founding, China (6510733)
文摘To quantify the relationships between rice plant architecture parameters and the corresponding organ biomass, and to research on functional structural plant models of rice plant, this paper presented a biomass-based model of aboveground architectural parameters of rice （Oryza sativa L.） in the young seedling stage, designed to explain effects of cultivars and environmental conditions on rice aboveground morphogenesis at the individual leaf level. Various model variables, including biomass of blade and blade length, were parameterized for rice based on data derived from an outdoor experiment with rice cv. Liangyou 108, 86You 8, Nanjing 43, and Yangdao 6. The organ dimensions of rice aboveground were modelled taking corresponding organ biomass as an independent variable. Various variables in rice showed marked consistency in observation and simulation, suggesting possibilities for a general rice architectural model in the young seedling stage. Our descriptive model was suitable for our objective. However, they can set the stage for connection to physiological model via biomass and development of functional structural rice models （FSRM）, and start with the localized production and partitioning of assimilates as affected by abiotic growth factors. The finding of biomass-based rice architectural parameter models also can be used in morphological models of blade, sheath, and tiller of the other stages in rice life.
文摘A new fuzzy modeling method, which based on L - R fuzzy number, is discussed in this paper. First, the fuzzy state equation model is constructed based on fuzzy state variable,fuzzy Input variable and fuzzy output variable whkh are represented by L - R fuzzy number. And then, identification of time - varying parameter in this model is discussed further. At the end, a simulated application is given to Indicate the effectiveness of this fuzzy modeling method.
基金financially supported by the Hundred Talents Program of Chinese Academy of Sciencesthe National Natural Science Foundation of China (No. U1460202)the Key Laboratory of Superlight Material and Surface Technology (Harbin Engineering University), Ministry of Education
文摘Response surface methodology（RSM） is introduced into corrosion research as a tool to assess the effects of environmental factors and their interactions on corrosion behavior and establish a model for corrosion prediction in complex coupled environment（CCE）. In this study, a typical CCE, that is, the corrosion environment of pipelines in gas field is taken as an example. The effects of environmental factors such as chloride concentration, pH value and pressure as well as their interactions on critical pitting temperature（CPT） were evaluated, and a quadratic polynomial model was developed for corrosion prediction by RSM. The results showed that the model was excellent in corrosion prediction with R2= 0.9949. CPT was mostly affected by single environmental factor rather than interaction, and among the whole factors, chloride concentration was the most influential factor of CPT.
文摘In the field of computer graphics, procedural modeling has proven useful for the generation of models of complex realistic objects and environment. In this paper, we present something about the procedural techniques and its application on city modeling.
文摘By use of self-consistent field Xα scattered-wave (SCF-Xα-SW) method, the electronic structure was calculated for four models of Ti4Al14X (X=Al, Fe, Ni and Cu) clusters. The Ti4Al14X cluster was developed based on L12 Al3Ti-base intermetallic compound. The results are presented using the density of states (DOS) and one-electron properties, such as relative binding tendency between the atom and the model cluster, and hybrid bonding tendency between the alloying element and the host atoms. By comparing the four models of Ti4Al14X cluster, the effect of the Fe, Ni or Cu atom on the physical properties of Al3Ti-based L12 intermetallic compounds is analyzed. The results indicate that the addition of the Fe, Ni or Cu atom intensifies the relative binding tendency between Ti atom and Ti4Al14X cluster. It was found that the Fermi level (EF) lies in a maximum in the DOS for Ti4Al14Al cluster; on the contrary, the EF comes near a minimum tn the DOS for Ti4Al14X (X=Fe, Ni and Cu) cluster. Thus the L12 crystal structure for binary Al3Ti alloy is unstable, and the addition of the Fe, Ni or Cu atom to Al3Ti is benefical to stabilize L12 crystal structure. The calculation also shows that the Fe, Ni or Cu atom strengthens the hybrid bonding tendency between the central atom and the host atoms for Ti4Al14X cluster and thereby may lead to the constriction of the lattice of Al3Ti-base intermetallic compounds.
文摘This study was aimed at establishing allometric models for estimating LA (Leaf Area) of eight Coffea arabica genotypes in Mana district of Jimma Zone Oromia Regional State, South Western Ethiopia (7°46'N, 36°0'E). Many Methodologies and instruments have been devised to facilitate measurement of leaf area. However, these methods are destructive, laborious and expensive. For modeling leaf area, leaf width, leaf length and leaf area of 1200 leaves (50 leaves for each genotype) was measured for model calibration and the respective measurements on 960 leaves were used for model validation. Linear measurement was taken from leaves and branch diameters of eight genotypes of C. arabica, cultivated in field following a randomized complete blocks design at three altitudes (High, Medium and Low) were evaluated to identify best option for input in the models, and to validate the method to estimate the leaf area. Linear and non-linear models were tested for their accuracy to predict leaf area of the eight C. arabica genotypes. The use of linear model resulted in high accuracy for all of the eight C. arabica genotypes. No significant effect of growing altitude and genotype was obtained among the slopes of the models. Therefore, one single model was fitted to the combined data of all genotypes at all altitudes (LA = 0.6434LW). Comparison between observed and predicted leaf area was made using this model in another independent dataset, conducted for model validation, exhibited a high degree of correlation (r = 0.98 - 0.99, P < 0. 01). The over or under estimation of the leaf area using this model ranges between 0.02% to 1.7% and this model is adequate to estimate the leaf area for the eight C. arabica genotypes. Hence, this model can be proposed to be reliably used and with this developed model, researchers can estimate the leaf area of newly released eight genotypes of C. arabica at different altitudes accurately.
基金Foundation item The National Natural Science Foundationof China (No10571065)
文摘To study the approximation of foreign currency option prices when the underlying assets＇ price dynamics are described by exponential Lévy processes, the convolution representations for option pricing formulas were given, and then the fast Fourier transform （FFT） algorithm was used to get the approximate values of option prices. Finally, a numerical example was given to demonstrate the calculate steps to the option price by FFT.
文摘The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-lag (DPL) model. The analytical solutions for the displacements, stresses, temperature, diffusion concentration, and volume fraction field with different values of the magnetic field, the rotation, the gravity, and the initial stress are obtained and portrayed graphically. The results indicate that the effects of gravity, rotation, voids, diffusion, initial stress, and electromagnetic field are very pronounced on the physical properties of the material.
基金Supported by the National Natural Science Foundation of China.
文摘Repeated-batch and continuous production of L-lactic acid by immobilized Rhizopusoryzae with calcium alginate entrapment method in a three-phase fluidized-bed bioreactor was stud-ied.The operation conditions were optimized.The productivity based on total reactor volume wasabout 3 times higher than that with free cells in a traditional stirred tank bioreactor.A mathemat-ical model was proposed and the model predictions were in good agreement with the experimentaldat.
基金supported by Grants from the National Science and Technology Pillar Program of China(No.2015DAD09B01)
文摘Fifty-three larch interspecific hybrid clones（Larix kaempferi × L.gmelini） and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were ＇S＇-shaped and 36 exhibited similar curves as the male parent.The coefficients of the logistic models were higher than 0.943,indicating that our results were effective in the simulation of the growth curves.ANOVA analysis showed significant differences in height of different clones （P／0.01）.Average date of maximum height growth was Day 173,and average duration of rapid growth lasted for 50 days.Annual average increase in height was 9.7cm d^（-1） and daily average increase was 0.2 cm.The ratio of GR to the total annual increase in height ranged from 51.2 to 68.8%,with the average being 59.8%.There was a positive correlation between k values and plant heights which benefited from the evaluation of early plant height.There was also a positive correlation between GR（growth stage）,GD（plant height） and annual increase in height.These results are informative to the evaluation of the elite clone selection and provide a theoretical basis for breeding and management.
文摘The objective of this study was to assess soil tillage methods by years interaction for dry matter of plant yield of maize(Zea mays L.) grown in West Poland by the additive main effects and multiplicative interaction model. The study comprised four soil tillage methods, analysed in 12 years through field trials arranged in a randomized complete block design, with four replicates. Dry matter of plant yield of the tested soil tillage methods varied from 86.7 dt ha(for no-plough tillage in 2005) to 246.4 dt ha(for complete conventional tillage in 2012), with an average of 146.6 dt ha. In the variance analysis, 49.07% of the total dry matter of plant yield variation was explained by years, 12.69% by differences between soil tillage methods, and 10.53% by soil tillage methods by years interaction. Dry matter of plant yield is highly influenced by soil tillage methods by years factors.
