Harmonic mode-locking(HML)in soliton fiber lasers is crucial for generating high-repetition-rate pulse trains beyond the fundamental cavity frequency,enabling advanced applications in,for example,optical communication...Harmonic mode-locking(HML)in soliton fiber lasers is crucial for generating high-repetition-rate pulse trains beyond the fundamental cavity frequency,enabling advanced applications in,for example,optical communication and precision sensing.However,achieving HML in experiments is challenging,owing to its inherent instability and high sensitivity to laser parameters,resulting in complex and iterative adjustments.In this paper,a novel HML technique utilizing bidirectional adjustment of pump power is proposed,and it is experimentally demonstrated in an all-fiber hybrid mode-locked soliton laser.By first increasing the pump power to generate a soliton bunch with a certain number of pulses and then gradually decreasing it,HML can be achieved at an order corresponding to the number of pulses in the soliton bunch.Experimental results on the evolution of temporal pulse trains during bidirectional adjustment of the pump power enable a relationship to be established between pump power and soliton bunching with increasing pump power,and reveal the collapse of the soliton bunch and subsequent gradual uniform distribution of solitons into an HML state with decreasing pump power.Second-to sixth-order HML is successfully generated using the proposed technique,and an analysis of the results provides a deeper understanding of the observed pulse dynamics.展开更多
We achieved an ultra-flat broad spectrum output with a 20-dB bandwidth of 77.85 nm in a double-clad Yb-doped fiber laser.The intensity difference between the highest and lowest points of the spectrum indicates a flatn...We achieved an ultra-flat broad spectrum output with a 20-dB bandwidth of 77.85 nm in a double-clad Yb-doped fiber laser.The intensity difference between the highest and lowest points of the spectrum indicates a flatness better than4 dB.More notably,this ultra-flat broad spectrum maintains a stable single-pulse mode-locking state.With the increase of pump power,an ultra-wide spectrum with a 20-dB bandwidth approaching 100 nm was formed at a pump power of 2.25 W.Additionally,we obtained a 9-pulse mode-locked state at another PC station with the same pump,which is the highest number of stable mode-locked pulse bursts observed so far with a first-order Raman frequency shift.This fiber laser shows its benefits of ultra-flat broad spectrum,high stability,and ease of fabrication,which provides a new method of obtaining the broadband light source for multiple practical applications.展开更多
一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
In the last few years,research on advanced ultrafast photonic devices has attracted great interest from laser physicists.As a semiconductor material with excellent nonlinear saturation absorption characteristics,Ga As...In the last few years,research on advanced ultrafast photonic devices has attracted great interest from laser physicists.As a semiconductor material with excellent nonlinear saturation absorption characteristics,Ga As has been used in solidstate and fiber lasers as a mode-locker.However,the pulse widths that have been reported in the searchable published literature are all long and the shortest is tens of picoseconds.Femtosecond pulse widths,desired for a variety of applications,have not yet been reported in Ga As-based pulsed lasers.In this work,we further explore the nonlinear characteristics of Ga As that has been magnetron sputtered onto the surface of a tapered fiber and its application in the generation of femtosecond lasing via effective dispersion optimization and nonlinearity management.With the enhanced interaction between evanescent waves and Ga As nanosheets,mode-locked soliton pulses as short as 830 fs are generated at repetition rates of 4.64 MHz.As far as we know,this is the first time that femtosecond-level pulses have been generated with a Ga As-based saturable absorber.In addition,soliton molecules,including in the dual-pulse state,are also realized under stronger pumping.This work demonstrates that Ga As-based photonic devices have good application prospects in effective polymorphous ultrashort pulsed laser generation.展开更多
We designed and investigated a passive synchronized mode-locked fiber laser.The device utilizes a dual-cavity structure driven by the nonlinear polarization rotation(NPR)mechanism.Stable mode-locking is attained by sy...We designed and investigated a passive synchronized mode-locked fiber laser.The device utilizes a dual-cavity structure driven by the nonlinear polarization rotation(NPR)mechanism.Stable mode-locking is attained by synergistically controlling gain,polarization state,and optical path length in two symmetric sub-cavities.Experiments proved that repetition rate of the sub-cavities can be adjusted via the time delay line(TDL)to achieve synchronized mode-locking.The system stably generates multi-wavelength pulses at a single repetition frequency,evidenced by multiple spectral peaks and equidistant pulse sequences.These findings facilitate the development of high-performance multi-wavelength ultrashort pulse sources,crucial for optical communications,spectral analysis,and remote sensing.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from...The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operato...Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental con...Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.展开更多
This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)sum...This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.展开更多
Currently,the performance,cost,and environmental sustainability of saturable absorbers(SAs)represent major bottlenecks in the development of ultrafast fiber lasers.However,the development of high-performance SAs remai...Currently,the performance,cost,and environmental sustainability of saturable absorbers(SAs)represent major bottlenecks in the development of ultrafast fiber lasers.However,the development of high-performance SAs remains challenging due to intricate fabrication processes and inadequate nonlinear performance.In this context,this work presents the natural alkaloid berberine as a promising alternative for mode-locked erbium-doped fiber lasers.The berberine-based SA exhibits excellent nonlinear optical properties,including a modulation depth of 24.40%and a saturation intensity of 1.281MW/cm^(2),and successfully enables stable femtosecond pulse generation.By employing time-stretched dispersive Fourier transform technology,the transient dynamics results indicate that the berberine-based SA significantly shortens the relaxation oscillation time and effectively suppresses pulse intensity fluctuations,thereby accelerating the self-starting process of mode-locking.This work provides a new strategy for developing high-performance,low-cost,and environmentally friendly ultrafast photonic devices,significantly advancing the practical application of green SAs.展开更多
Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to th...Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.展开更多
Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable pat...Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.展开更多
The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurode...The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.展开更多
Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLD...Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.展开更多
To improve the overall magnetic properties of Sm(CoFeCuZr)_(z)sintered magnets,a dual-alloy sintering process that involves mixing high-iron,low-copper powders with low-iron,high-copper powders was systematically inve...To improve the overall magnetic properties of Sm(CoFeCuZr)_(z)sintered magnets,a dual-alloy sintering process that involves mixing high-iron,low-copper powders with low-iron,high-copper powders was systematically investigated.The results demonstrate that this method significantly improves the Cu-lean phenomenon at the grain boundaries,achieves multiscale uniform microstructures,greatly enhances the pinning field strength,and ultimately produces a high-performance dual-alloy magnet with a maximum energy product((BH)_(max))exceeding 240 kJ/m^(3)and an intrinsic coercivity(H_(cj))exceeding 2400 kA/m.In particular,when 35 wt.%of low-iron,high-copper alloy powder is incorporated,the dual-alloy magnet achieves a remanence of 1.13 T,H_(cj)of 2691.2 kA/m and(BH)_(max)of 248 kJ/m^(3).To evaluate the overall magnetic performance,the sum of H_(cj)(in kA/m)and(BH)_(max)(in kJ/m^(3))is used as a combined parameter,yielding a value of 2939.2.Compared with single-alloy magnets of the same composition,the dual-alloy sintering process yields magnets with a more uniform elemental distribution and superior magnetic properties.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52475574).
文摘Harmonic mode-locking(HML)in soliton fiber lasers is crucial for generating high-repetition-rate pulse trains beyond the fundamental cavity frequency,enabling advanced applications in,for example,optical communication and precision sensing.However,achieving HML in experiments is challenging,owing to its inherent instability and high sensitivity to laser parameters,resulting in complex and iterative adjustments.In this paper,a novel HML technique utilizing bidirectional adjustment of pump power is proposed,and it is experimentally demonstrated in an all-fiber hybrid mode-locked soliton laser.By first increasing the pump power to generate a soliton bunch with a certain number of pulses and then gradually decreasing it,HML can be achieved at an order corresponding to the number of pulses in the soliton bunch.Experimental results on the evolution of temporal pulse trains during bidirectional adjustment of the pump power enable a relationship to be established between pump power and soliton bunching with increasing pump power,and reveal the collapse of the soliton bunch and subsequent gradual uniform distribution of solitons into an HML state with decreasing pump power.Second-to sixth-order HML is successfully generated using the proposed technique,and an analysis of the results provides a deeper understanding of the observed pulse dynamics.
基金Project supported by the National Natural Science Foundation of China(Grant No.12204132)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2021MF122)+1 种基金Shandong Province TechnologyBased SME Innovation Enhancement Project(Grant No.2024TSGC0715)the Postgraduate Education Reform Project of Shandong Province,China(Grant No.SDYJSJGC2024107)。
文摘We achieved an ultra-flat broad spectrum output with a 20-dB bandwidth of 77.85 nm in a double-clad Yb-doped fiber laser.The intensity difference between the highest and lowest points of the spectrum indicates a flatness better than4 dB.More notably,this ultra-flat broad spectrum maintains a stable single-pulse mode-locking state.With the increase of pump power,an ultra-wide spectrum with a 20-dB bandwidth approaching 100 nm was formed at a pump power of 2.25 W.Additionally,we obtained a 9-pulse mode-locked state at another PC station with the same pump,which is the highest number of stable mode-locked pulse bursts observed so far with a first-order Raman frequency shift.This fiber laser shows its benefits of ultra-flat broad spectrum,high stability,and ease of fabrication,which provides a new method of obtaining the broadband light source for multiple practical applications.
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
基金Project supported by the National Natural Science Foundation of China(Grant No.12164030)Young Science and Technology Talents of Inner Mongolia,China(Grant No.NJYT22101)+1 种基金the Central Government Guides Local Science,the Technology Development Fund Projects(Grant No.2023ZY0005)the Science and Technology Plan Projects of Inner Mongolia Autonomous Region of China(Grant No.2023KYPT0012)。
文摘In the last few years,research on advanced ultrafast photonic devices has attracted great interest from laser physicists.As a semiconductor material with excellent nonlinear saturation absorption characteristics,Ga As has been used in solidstate and fiber lasers as a mode-locker.However,the pulse widths that have been reported in the searchable published literature are all long and the shortest is tens of picoseconds.Femtosecond pulse widths,desired for a variety of applications,have not yet been reported in Ga As-based pulsed lasers.In this work,we further explore the nonlinear characteristics of Ga As that has been magnetron sputtered onto the surface of a tapered fiber and its application in the generation of femtosecond lasing via effective dispersion optimization and nonlinearity management.With the enhanced interaction between evanescent waves and Ga As nanosheets,mode-locked soliton pulses as short as 830 fs are generated at repetition rates of 4.64 MHz.As far as we know,this is the first time that femtosecond-level pulses have been generated with a Ga As-based saturable absorber.In addition,soliton molecules,including in the dual-pulse state,are also realized under stronger pumping.This work demonstrates that Ga As-based photonic devices have good application prospects in effective polymorphous ultrashort pulsed laser generation.
文摘We designed and investigated a passive synchronized mode-locked fiber laser.The device utilizes a dual-cavity structure driven by the nonlinear polarization rotation(NPR)mechanism.Stable mode-locking is attained by synergistically controlling gain,polarization state,and optical path length in two symmetric sub-cavities.Experiments proved that repetition rate of the sub-cavities can be adjusted via the time delay line(TDL)to achieve synchronized mode-locking.The system stably generates multi-wavelength pulses at a single repetition frequency,evidenced by multiple spectral peaks and equidistant pulse sequences.These findings facilitate the development of high-performance multi-wavelength ultrashort pulse sources,crucial for optical communications,spectral analysis,and remote sensing.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金Sichuan Science and Technology Program(2025ZNSFSC1341)Fundamental Research Funds for the Central Universities(J2022-090,25CAFUC04087)。
文摘The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
基金support of the“Pioneer”and“Leading Goose”Research&Development Program of Zhejiang(2024C01028)the State Key Laboratory of Industrial Control Technology,China(ICT2024C04)are gratefully acknowledged.
文摘Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.
文摘This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.
基金supported by the Key Project of Science and Technology Research Program of Hubei Provincial Department of Education,China(D20231704)the Opening Foundation of Hubei Key Laboratory for New Textile Materials and Applications Research(FZXCL202410)the Wuhan Textile University Special Fund Project。
文摘Currently,the performance,cost,and environmental sustainability of saturable absorbers(SAs)represent major bottlenecks in the development of ultrafast fiber lasers.However,the development of high-performance SAs remains challenging due to intricate fabrication processes and inadequate nonlinear performance.In this context,this work presents the natural alkaloid berberine as a promising alternative for mode-locked erbium-doped fiber lasers.The berberine-based SA exhibits excellent nonlinear optical properties,including a modulation depth of 24.40%and a saturation intensity of 1.281MW/cm^(2),and successfully enables stable femtosecond pulse generation.By employing time-stretched dispersive Fourier transform technology,the transient dynamics results indicate that the berberine-based SA significantly shortens the relaxation oscillation time and effectively suppresses pulse intensity fluctuations,thereby accelerating the self-starting process of mode-locking.This work provides a new strategy for developing high-performance,low-cost,and environmentally friendly ultrafast photonic devices,significantly advancing the practical application of green SAs.
基金supported by the Foundation of National Dairy Technology Innovation Center(2022-Open Funding Project-12)Foundation of National Dairy Technology Innovation Center(2022-Scientific Research-9)+2 种基金Key Project of National Dairy Innovation Research Center of Inner Mongolia(2021-National Dairy Innovation Research Center-8)Key Projects of Research Operating Expenses of Provincial Research Institutes in Heilongjiang Province(CZKYF2021-2-B017)Key Project of Natural Science Foundation of Heilongjiang Province(ZD2022C007).
文摘Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.
基金supported by the National Key Research and Development Program of ChinaNational Natural Science Foundation of China(NSFC)Jilin Province Science and Technology Development Plan Project under Grants 2020YFA0715000,62075081,and 20220402011GH。
文摘Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.
文摘The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.
基金financially supported by the Science and Technology Project of PetroChina Company Limited,China(No.2022DJ6314)the National Natural Science Foundation of China(No.52173056)。
文摘Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.
基金supported by the National Key Research and Development Program for Young Scientists,China(No.2023YFB3508400)the National Natural Science Foundation of China(Nos.51871005,51931007)+1 种基金the Key Program of Science and Technology Development Project of Beijing Municipal Education Commission of China(No.KZ202010005009)the Program of Top Disciplines Construction in Beijing,China(No.PXM2019_014204_500031)。
文摘To improve the overall magnetic properties of Sm(CoFeCuZr)_(z)sintered magnets,a dual-alloy sintering process that involves mixing high-iron,low-copper powders with low-iron,high-copper powders was systematically investigated.The results demonstrate that this method significantly improves the Cu-lean phenomenon at the grain boundaries,achieves multiscale uniform microstructures,greatly enhances the pinning field strength,and ultimately produces a high-performance dual-alloy magnet with a maximum energy product((BH)_(max))exceeding 240 kJ/m^(3)and an intrinsic coercivity(H_(cj))exceeding 2400 kA/m.In particular,when 35 wt.%of low-iron,high-copper alloy powder is incorporated,the dual-alloy magnet achieves a remanence of 1.13 T,H_(cj)of 2691.2 kA/m and(BH)_(max)of 248 kJ/m^(3).To evaluate the overall magnetic performance,the sum of H_(cj)(in kA/m)and(BH)_(max)(in kJ/m^(3))is used as a combined parameter,yielding a value of 2939.2.Compared with single-alloy magnets of the same composition,the dual-alloy sintering process yields magnets with a more uniform elemental distribution and superior magnetic properties.
