1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedan...1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and展开更多
The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil a...The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.展开更多
Phosphate rock has been considered as one of the potential promising resources for rare earth elements(REEs). But the cost issues and the technical challenges caused by the low content of REEs in ores did hinder the f...Phosphate rock has been considered as one of the potential promising resources for rare earth elements(REEs). But the cost issues and the technical challenges caused by the low content of REEs in ores did hinder the further development of REEs recovery technologies. In order to explore a green process for the recovery of REEs from phosphate rock, this study investigates the effects of phosphoric acid concentration, liquid-to-solid ratio(L/S ratio), leaching time and temperature on the leaching efficiencies of the major components from phosphate rock. A REEs recovery of 94.3% and a phosphorus recovery of 95.3%are achieved under the optimal conditions of attacking phosphate rock using 30%P_2 O_5 acid with an L/S ratio of 10:1 and a stirring speed of 250 r/min at 25 ℃ for 4 h. Then,the selective precipitation of REEs with 81.3% REEs recovery is realized by heating up the leaching solution from 25 to 90 ℃ and keeping for4 h. Thereafter, more than 95% phosphoric acid is recovered by H_2 SO_4 and high purity gypsum, more than95% CaSO_4(tested by XRF), is also produced at the same time. Ultimately, a green process that leaches phosphate rock with H_3 PO_4, selectively precipitates REEs from leaching solution by heating up, recovers H_3 PO_4 with H2 SO4 is proposed. Compared with REE recovery in traditional processes, this process owns the merits of simple operation, energy saving and minimum wastes.展开更多
A new high-order multi-joint finite element for thin-walled bar was derived from the Hermite interpolation polynomial and minimum potential energy principle. This element's characteristics are that it is of high a...A new high-order multi-joint finite element for thin-walled bar was derived from the Hermite interpolation polynomial and minimum potential energy principle. This element's characteristics are that it is of high accuracy and can be used in finite method analysis of bridge, tall mega-structure building.展开更多
In this work, we show that it is possible to establish coordinate transformations between inertial reference frames in the theory of special relativity with a minimum universal speed of physical transmissions. The est...In this work, we show that it is possible to establish coordinate transformations between inertial reference frames in the theory of special relativity with a minimum universal speed of physical transmissions. The established coordinate transformations, referred to as modified Lorentz transformations because they have almost identical form to the Lorentz transformations, also comply with the requirement of invariance of the Minkowski line element. Particularly, the minimum universal speed can be associated with the phase speed of de Broglie matter wave. As application, we also discuss the possibility to formulate relativistic classical and quantum mechanics for the special relativity associated with the modified Lorentz transformations, which describes physical processes that represent an expansion or a collapsing of massive quantum particles.展开更多
文摘1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and
文摘The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.
基金Project supported by the National Natural Science Foundation of China(51674036)the Beijing Nova Program(Z161100004916108)
文摘Phosphate rock has been considered as one of the potential promising resources for rare earth elements(REEs). But the cost issues and the technical challenges caused by the low content of REEs in ores did hinder the further development of REEs recovery technologies. In order to explore a green process for the recovery of REEs from phosphate rock, this study investigates the effects of phosphoric acid concentration, liquid-to-solid ratio(L/S ratio), leaching time and temperature on the leaching efficiencies of the major components from phosphate rock. A REEs recovery of 94.3% and a phosphorus recovery of 95.3%are achieved under the optimal conditions of attacking phosphate rock using 30%P_2 O_5 acid with an L/S ratio of 10:1 and a stirring speed of 250 r/min at 25 ℃ for 4 h. Then,the selective precipitation of REEs with 81.3% REEs recovery is realized by heating up the leaching solution from 25 to 90 ℃ and keeping for4 h. Thereafter, more than 95% phosphoric acid is recovered by H_2 SO_4 and high purity gypsum, more than95% CaSO_4(tested by XRF), is also produced at the same time. Ultimately, a green process that leaches phosphate rock with H_3 PO_4, selectively precipitates REEs from leaching solution by heating up, recovers H_3 PO_4 with H2 SO4 is proposed. Compared with REE recovery in traditional processes, this process owns the merits of simple operation, energy saving and minimum wastes.
文摘A new high-order multi-joint finite element for thin-walled bar was derived from the Hermite interpolation polynomial and minimum potential energy principle. This element's characteristics are that it is of high accuracy and can be used in finite method analysis of bridge, tall mega-structure building.
文摘In this work, we show that it is possible to establish coordinate transformations between inertial reference frames in the theory of special relativity with a minimum universal speed of physical transmissions. The established coordinate transformations, referred to as modified Lorentz transformations because they have almost identical form to the Lorentz transformations, also comply with the requirement of invariance of the Minkowski line element. Particularly, the minimum universal speed can be associated with the phase speed of de Broglie matter wave. As application, we also discuss the possibility to formulate relativistic classical and quantum mechanics for the special relativity associated with the modified Lorentz transformations, which describes physical processes that represent an expansion or a collapsing of massive quantum particles.
