In the machining of high-end optical components,the aerostatic spindle error of an ultra-precision machine tool has a significant impact on the surface quality of the machined surfaces.The surfaces of many high-end op...In the machining of high-end optical components,the aerostatic spindle error of an ultra-precision machine tool has a significant impact on the surface quality of the machined surfaces.The surfaces of many high-end optical components need to meet the extremely stringent requirements of the full-frequency band error,which poses significant challenge to the control of the aerostatic spindle error.In this research,we put forward an active control method for the frequency domain error of the aerostatic spindle based on acoustic levitation,in which the acousticmagnetism-fluid-solid multi-field coupling rotor dynamics modeling method of the aerostatic spindle was proposed and the corresponding multi-field coupling model was established.Through the numerical simulation and preliminary experiments,the influence law of acoustic levitation on the frequency domain error of the aerostatic spindle is obtained.The results showed that acoustic levitation can be used to control the frequency domain error of the aerostatic spindle to some extent,which verified the effectiveness of the proposed method.展开更多
In order to restrain the mid-spatial frequency error in magnetorheological finishing (MRF) process, a novel part-random path is designed based on the theory of maximum entropy method (MEM). Using KDMRF-1000F polishing...In order to restrain the mid-spatial frequency error in magnetorheological finishing (MRF) process, a novel part-random path is designed based on the theory of maximum entropy method (MEM). Using KDMRF-1000F polishing machine, one flat work piece (98 mm in diameter) is polished. The mid-spatial frequency error in the region using part-random path is much lower than that by using common raster path. After one MRF iteration (7.46 min), peak-to-valley (PV) is 0.062 wave (1 wave =632.8 nm), root-mean-square (RMS) is 0.010 wave and no obvious mid-spatial frequency error is found. The result shows that the part-random path is a novel path, which results in a high form accuracy and low mid-spatial frequency error in MRF process.展开更多
This paper presents an innovative and effective control strategy tailored for a deregulated,diversified energy system involving multiple interconnected area.Each area integrates a unique mix of power generation techno...This paper presents an innovative and effective control strategy tailored for a deregulated,diversified energy system involving multiple interconnected area.Each area integrates a unique mix of power generation technologies:Area 1 combines thermal,hydro,and distributed generation;Area 2 utilizes a blend of thermal units,distributed solar technologies(DST),and hydro power;andThird control area hosts geothermal power station alongside thermal power generation unit and hydropower units.The suggested control system employs a multi-layered approach,featuring a blended methodology utilizing the Tilted Integral Derivative controller(TID)and the Fractional-Order Integral method to enhance performance and stability.The parameters of this hybrid TID-FOI controller are finely tuned using an advanced optimization method known as the Walrus Optimization Algorithm(WaOA).Performance analysis reveals that the combined TID-FOI controller significantly outperforms the TID and PID controllers when comparing their dynamic response across various system configurations.The study also incorporates investigation of redox flow batteries within the broader scope of energy storage applications to assess their impact on system performance.In addition,the research explores the controller’s effectiveness under different power exchange scenarios in a deregulated market,accounting for restrictions on generation ramp rates and governor hysteresis effects in dynamic control.To ensure the reliability and resilience of the presented methodology,the system transitions and develops across a broad range of varying parameters and stochastic load fluctuation.To wrap up,the study offers a pioneering control approach-a hybrid TID-FOI controller optimized via the Walrus Optimization Algorithm(WaOA)-designed for enhanced stability and performance in a complex,three-region hybrid energy system functioning within a deregulated framework.展开更多
The GaoFen7(GF7)optical satellite is the first Chinese civilian sub-meter high-resolution stereo mapping satellite and is equipped with a double linear array camera and laser altimeter to achieve large-scale topograph...The GaoFen7(GF7)optical satellite is the first Chinese civilian sub-meter high-resolution stereo mapping satellite and is equipped with a double linear array camera and laser altimeter to achieve large-scale topographic mapping.To improve the accuracy of attitude determination,an attitude determination system comprised of four star sensors is loaded.According to the measurement accuracy and steady performance,the star sensors 1a and 1b is usually used together for satellite attitude calculation,which is called the conventional mode of attitude determination.Then,the combination of star sensors 2a and 2b is called the unconventional mode of attitude determination.Affected by variations in the incident angle of sunlight and solar radiation,thermal deformation occurs in the body and installation structure of the star sensor,which causes Attitude Low-Frequency Error(ALFE)and seriously influences the consistency of attitude determination results of different combination modes for multiple star sensors system.This study proposes an ALFE analysis and calibration approach for the multiple star sensors system of GF7 satellite to ensure the consistency of attitude determination results of different combination modes.Based on the statistical characteristics of the angles of the three axes,the installation parameters of the four star sensors are first calibrated.After analyzing the characteristics of the optical axis angles within 1420 orbit periods over 135 days,the segmented ALFE compensation model between the unconventional and conventional modes is proposed based on the Fourier series model and input parameter of latitude.Based on the on-orbit installation parameters and the ALFE model,the precise attitude determination results of the unconventional mode are calculated.Experimental results show that the attitude determination consistency after compensation is better than 2″.Moreover,the reliable application time range of the compensation model is 30 days to satisfy the requirements for high-precision attitude determination of GF7 satellite.展开更多
Aim To derive the error formulae for the algorithm of frequency response computation. Methods This algorithm was introduced theoretically, the error sources of the algorithm were analyzed and the formulae of the mai...Aim To derive the error formulae for the algorithm of frequency response computation. Methods This algorithm was introduced theoretically, the error sources of the algorithm were analyzed and the formulae of the main error were derived. Results The repeatability and stability of the processing results of the algorithm are better than those measured by 1250 Frequency Analysor. Conclusion The error formulae derived are theoretically right and practically valid.展开更多
Joint Radar and Communications(JRC)can implement two Radio Frequency(RF)functions using a single of resources,providing significant hardware,power and spectrum savings for wireless systems requiring both functions.Fre...Joint Radar and Communications(JRC)can implement two Radio Frequency(RF)functions using a single of resources,providing significant hardware,power and spectrum savings for wireless systems requiring both functions.Frequency-Hopping(FH)MIMO radar is a popular candidate for JRC because the achieved communication symbol rate can greatly exceed the radar pulse repetition frequency.However,practical transceiver imperfections can cause many existing theoretical designs to fail.In this work,we reveal for the first time the non-trivial impact of hardware imperfections on FH-MIMO JRC and model the impact analytically.We also design new waveforms and correspondingly develop a low-complexity algorithm to jointly estimate the hardware imperfections of unsynchronized receiver.In addition,using low-cost software-defined radios and Commercial Off-The-Shelf(COTS)products,we build the first FH-MIMO JRC experimental platform with simultaneous over-the-air radar and communication validation.Confirmed by simulation and experimental results,the proposed designs achieve high performance for both radar and communications.展开更多
The low-frequency periodic error of star tracker is one of the most critical problems for high-accuracy satellite attitude determination.In this paper an approach is proposed to identify and compensate the low-frequen...The low-frequency periodic error of star tracker is one of the most critical problems for high-accuracy satellite attitude determination.In this paper an approach is proposed to identify and compensate the low-frequency periodic error for star tracker in attitude measurement.The analytical expression between the estimated gyro drift and the low-frequency periodic error of star tracker is derived firstly.And then the low-frequency periodic error,which can be expressed by Fourier series,is identified by the frequency spectrum of the estimated gyro drift according to the solution of the first step.Furthermore,the compensated model of the low-frequency periodic error is established based on the identified parameters to improve the attitude determination accuracy.Finally,promising simulated experimental results demonstrate the validity and effectiveness of the proposed method.The periodic error for attitude determination is eliminated basically and the estimation precision is improved greatly.展开更多
This paper surveys a number of recent advances in the error analysis in the frequency domain for a digital simulation model. It is emphasized to discuss the errors in characteristic roots and transfer funcnon of the d...This paper surveys a number of recent advances in the error analysis in the frequency domain for a digital simulation model. It is emphasized to discuss the errors in characteristic roots and transfer funcnon of the digital simulation model, the frequency domain errors of the data transfers between thesimulation submodels, and some compensation methods for the errors. Some of the questions to be answered are also presented.展开更多
Error analysis methods in frequency domain are developed in this paper for determining the characteristic root and transfer function errors when the linear multipass algorithms are used to solve linear differential eq...Error analysis methods in frequency domain are developed in this paper for determining the characteristic root and transfer function errors when the linear multipass algorithms are used to solve linear differential equations. The relation between the local truncation error in time domain and the error in frequency domain is established, which is the basis for developing the error estimation methods. The error estimation methods for the digital simulation model constructed by using the Runge-Kutta algorithms and the linear multistep predictor-corrector algorithms are also given.展开更多
Based on the concept of the constitutive relation error along with the residuals of both the origin and the dual problems, a goal-oriented error estimation method with extended degrees of freedom is developed. It lead...Based on the concept of the constitutive relation error along with the residuals of both the origin and the dual problems, a goal-oriented error estimation method with extended degrees of freedom is developed. It leads to the high quality locM error bounds in the problem of the direct-solution steady-state dynamic analysis with a frequency-domain finite element, which involves the enrichments with plural variable basis functions. The solution of the steady-state dynamic procedure calculates the harmonic response directly in terms of the physical degrees of freedom in the model, which uses the mass, damping, and stiffness matrices of the system. A three-dimensional finite element example is carried out to illustrate the computational procedures.展开更多
Bistatic/multistatic radar has great potential advantages over its monostatic counterpart. However, the separation of a transmitter and a receiver leads to difficulties in locating the target position accurately and g...Bistatic/multistatic radar has great potential advantages over its monostatic counterpart. However, the separation of a transmitter and a receiver leads to difficulties in locating the target position accurately and guaranteeing space-timefrequency synchronization of the transmitter and the receiver.The error model of space-time-frequency synchronization in a motion platform of bistatic/multistatic radar is studied. The relationship between the space synchronization error and the transmitter platform position, receiver platform position, moving state, and beam pointing error, is analyzed. The effect of space synchronization error on target echo power is studied. The target scattering characteristics are restructured by many separate scattering centers of the target in high frequency regions. Based on the scattering centers model of the radar target, this radar target echo model and the simulation method are discussed. The algorithm of bistatic/multistatic radar target echo accurately reflects the scattering characteristics of the radar target, pulse modulation speciality of radar transmitting signals, and spacetime-frequency synchronization error characteristics between the transmitter station and the receiver station. The simulation of bistatic radar is completed in computer, and the results of the simulation validate the feasibility of the method.展开更多
In this paper, we proposed an output voltage stabilization of a DC-DC Zeta converter using hybrid control. We modeled the Zeta converter under continuous conduction mode operation. We derived a switching control law t...In this paper, we proposed an output voltage stabilization of a DC-DC Zeta converter using hybrid control. We modeled the Zeta converter under continuous conduction mode operation. We derived a switching control law that brings the output voltage to the desired level. Due to infinite switching occurring at the desired level, we enhanced the switching control law by allowing a sizeable output voltage ripple. We derived mathematical models that allow one to choose the desired switching frequency. In practice, the existence of the non-ideal properties of the Zeta converter results in steady-state output voltage error. By analyzing the power loss in the zeta converter, we proposed an improved switching control law that eliminates the steady-state output voltage error. The effectiveness of the proposed method is illustrated with simulation results.展开更多
Mid-frequency wavefront errors can be of the most importance for some optical components, but they're not explicitly covered by corresponding international standards such as ISO 10110. The testing methods for the ...Mid-frequency wavefront errors can be of the most importance for some optical components, but they're not explicitly covered by corresponding international standards such as ISO 10110. The testing methods for the errors also have a lot of aspects to be improved. This paper gives an overview of the specifications especially of PSD. NIF, developed by America, and XMM, developed by Europe, have both discovered some new testing methods.展开更多
This paper presents an algorithm that aims to reduce the peak-to-average power ratio（PAPR） of orthogonal frequency division multiplexing（OFDM） communication systems while maintaining frequency tracking.The algorit...This paper presents an algorithm that aims to reduce the peak-to-average power ratio（PAPR） of orthogonal frequency division multiplexing（OFDM） communication systems while maintaining frequency tracking.The algorithm achieves PAPR reduction by applying the complex conjugates of the data symbol obtained from the frequency domain to cancel the phase of the data symbol.A likelihood estimator is used to obtain the sub-carrier phase error due to the residual carrier frequency offset（RCFO） using the same complex conjugates as a pilot signal.Furthermore,a joint time and frequency domain multicarrier phase locked loop（MPLL） is developed to compensate additional frequency offset.Simulation results show that this algorithm is capable of reducing PAPR without impacting the frequency tracking performance.展开更多
A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This me...A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This method is based on accurate estimation and correction of the phase and amplitude error along two dimensions（range and azimuth）, i.e., the error estimation inside the subpulse（in-subpulse error） and across the stepped frequency subpulses（cross-subpulse error） of transmitted CSSF signals. Validated both with simulated data and experimental data recorded in the deformation monitoring campaign, it can be seen that the method as well as the relative conclusions can be fully and effectively applied to most of the stepped frequency systems.展开更多
In this paper,we design a spatial modulation based orthogonal time frequency space(SMOTFS)system to achieve improved transmission reliability and meet the high transmission rate and highspeed demands of future mobile ...In this paper,we design a spatial modulation based orthogonal time frequency space(SMOTFS)system to achieve improved transmission reliability and meet the high transmission rate and highspeed demands of future mobile communications,which fully utilizes the characteristics of spatial modulation(SM)and orthogonal time frequency space(OTFS)transmission.The detailed system design and signal processing of the SM-OTFS system have been presented.The closed-form expressions of the average symbol error rate(ASER)and average bit error rate(ABER)of the SM-OTFS system have been derived over the delay-Doppler channel with the help of the union bounding technique and moment-generating function(MGF).Meanwhile,the system complexity has been evaluated.Numerical results verify the correctness of the theoretical ASER and ABER analysis of the SM-OTFS system in the high signal-to-noise ratio(SNR)regions and also show that the SM-OTFS system outperforms the traditional SM based orthogonal frequency division multiplexing(SM-OFDM)system with limited complexity increase under mobile conditions,especially in high mobility scenarios.展开更多
The problem of estimating direction of arrivals (DOA) and Doppler frequency for many sources is considered in the presence of general array errors (such as amplitude and phase error of sensors, setting position error ...The problem of estimating direction of arrivals (DOA) and Doppler frequency for many sources is considered in the presence of general array errors (such as amplitude and phase error of sensors, setting position error of sensors). Adopting direct array manifold in a uniform circular array (UCA), the estimation of Doppler frequency can be obtained by DOA matrix. Based on analyzing the statistic characters of general array errors, the estimation of DOA can be obtained by Weight Total Least Squares. Numerical results illustrate that the estimator is robust to general array errors and show the capabilities of the estimator.展开更多
Aperture-dependent motion compensation is important for wide beam Synthetic Aperture Radar(SAR) data processing.This paper studies a wide beam motion compensation algorithm based on frequency division.It takes blocks ...Aperture-dependent motion compensation is important for wide beam Synthetic Aperture Radar(SAR) data processing.This paper studies a wide beam motion compensation algorithm based on frequency division.It takes blocks along azimuth dimension in frequency domain and applies an-gle-variant motion compensation in time domain.With this frequency division based motion com-pensation approach,the effects of aperture-dependent residual phase errors are corrected precisely.The rationale and procedure of this algorithm are introduced in detail.Point targets and images of a P-band airborne SAR with motion errors are simulated to validate this algorithm.Compared with the wide beam motion compensation algorithms based on time division,the proposed algorithm has better performance,especially in terms of high-frequency motion errors.展开更多
This paper investigates Carrier Frequency Offset (CFO) estimation in the uplink of the Orthogonal Frequency-Division Multiple Access (OFDMA) systems with the interleaved subcarrier assignment. CFOs between the transmi...This paper investigates Carrier Frequency Offset (CFO) estimation in the uplink of the Orthogonal Frequency-Division Multiple Access (OFDMA) systems with the interleaved subcarrier assignment. CFOs between the transmitters and the uplink receiver will destroy orthogonality among different subcarriers, hence resulting in inter-carrier interference and multiuser interference. A two-stage frequency offset estimation algorithm based on subspace processing is proposed. The main advantage of the proposed method is that it can obtain the CFOs of all users simultaneously using only one OFDMA block. Compared with the previously known methods, it not only has a relatively low implementation complexity but is also suitable for random subchannel assignment.展开更多
An unsupervised minimum mean square error FIR adaptive filtering （UAF） algorithm is proposed to estimate the system＇ s input signal. The algorithm only uses the system＇ s output signal and noise variance without r...An unsupervised minimum mean square error FIR adaptive filtering （UAF） algorithm is proposed to estimate the system＇ s input signal. The algorithm only uses the system＇ s output signal and noise variance without requiring knowledge of a reference signal. The frequency analysis shows that the UAF is a multi-spot bandpass filter with passing frequency determined by the system＇ s input signal. Namely, the UAF chooses the expected frequency and extremely restricts the unwanted fre- quency signal by using weight-updating scheme in time domain. However, the UAF presents the Gibbs phenomenon since the ideal filter is infinitely long which is unrealizable. The simulation and experimental results show that the UAF could effectively reduce the amplitude of the noise and im- prove the signal to noise ratio.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.52475494)Zhejiang Provincial Natural Science Foundation of China(Grant No.LY22E050003)Fundamental Research Funds for the Provincial Universities of Zhejiang(Grant No.RF-A2020005).
文摘In the machining of high-end optical components,the aerostatic spindle error of an ultra-precision machine tool has a significant impact on the surface quality of the machined surfaces.The surfaces of many high-end optical components need to meet the extremely stringent requirements of the full-frequency band error,which poses significant challenge to the control of the aerostatic spindle error.In this research,we put forward an active control method for the frequency domain error of the aerostatic spindle based on acoustic levitation,in which the acousticmagnetism-fluid-solid multi-field coupling rotor dynamics modeling method of the aerostatic spindle was proposed and the corresponding multi-field coupling model was established.Through the numerical simulation and preliminary experiments,the influence law of acoustic levitation on the frequency domain error of the aerostatic spindle is obtained.The results showed that acoustic levitation can be used to control the frequency domain error of the aerostatic spindle to some extent,which verified the effectiveness of the proposed method.
基金Supported by the National Basic Research Program of Chinathe National Natural Science Foundation of China (Grant Nos. 61332, 50775215, 50875256)
文摘In order to restrain the mid-spatial frequency error in magnetorheological finishing (MRF) process, a novel part-random path is designed based on the theory of maximum entropy method (MEM). Using KDMRF-1000F polishing machine, one flat work piece (98 mm in diameter) is polished. The mid-spatial frequency error in the region using part-random path is much lower than that by using common raster path. After one MRF iteration (7.46 min), peak-to-valley (PV) is 0.062 wave (1 wave =632.8 nm), root-mean-square (RMS) is 0.010 wave and no obvious mid-spatial frequency error is found. The result shows that the part-random path is a novel path, which results in a high form accuracy and low mid-spatial frequency error in MRF process.
文摘This paper presents an innovative and effective control strategy tailored for a deregulated,diversified energy system involving multiple interconnected area.Each area integrates a unique mix of power generation technologies:Area 1 combines thermal,hydro,and distributed generation;Area 2 utilizes a blend of thermal units,distributed solar technologies(DST),and hydro power;andThird control area hosts geothermal power station alongside thermal power generation unit and hydropower units.The suggested control system employs a multi-layered approach,featuring a blended methodology utilizing the Tilted Integral Derivative controller(TID)and the Fractional-Order Integral method to enhance performance and stability.The parameters of this hybrid TID-FOI controller are finely tuned using an advanced optimization method known as the Walrus Optimization Algorithm(WaOA).Performance analysis reveals that the combined TID-FOI controller significantly outperforms the TID and PID controllers when comparing their dynamic response across various system configurations.The study also incorporates investigation of redox flow batteries within the broader scope of energy storage applications to assess their impact on system performance.In addition,the research explores the controller’s effectiveness under different power exchange scenarios in a deregulated market,accounting for restrictions on generation ramp rates and governor hysteresis effects in dynamic control.To ensure the reliability and resilience of the presented methodology,the system transitions and develops across a broad range of varying parameters and stochastic load fluctuation.To wrap up,the study offers a pioneering control approach-a hybrid TID-FOI controller optimized via the Walrus Optimization Algorithm(WaOA)-designed for enhanced stability and performance in a complex,three-region hybrid energy system functioning within a deregulated framework.
基金supported by the National Science Fund for Distinguished Young Scholars[grant number 61825103]the Shanghai Aerospace Science and Technology Innovation Fund.
文摘The GaoFen7(GF7)optical satellite is the first Chinese civilian sub-meter high-resolution stereo mapping satellite and is equipped with a double linear array camera and laser altimeter to achieve large-scale topographic mapping.To improve the accuracy of attitude determination,an attitude determination system comprised of four star sensors is loaded.According to the measurement accuracy and steady performance,the star sensors 1a and 1b is usually used together for satellite attitude calculation,which is called the conventional mode of attitude determination.Then,the combination of star sensors 2a and 2b is called the unconventional mode of attitude determination.Affected by variations in the incident angle of sunlight and solar radiation,thermal deformation occurs in the body and installation structure of the star sensor,which causes Attitude Low-Frequency Error(ALFE)and seriously influences the consistency of attitude determination results of different combination modes for multiple star sensors system.This study proposes an ALFE analysis and calibration approach for the multiple star sensors system of GF7 satellite to ensure the consistency of attitude determination results of different combination modes.Based on the statistical characteristics of the angles of the three axes,the installation parameters of the four star sensors are first calibrated.After analyzing the characteristics of the optical axis angles within 1420 orbit periods over 135 days,the segmented ALFE compensation model between the unconventional and conventional modes is proposed based on the Fourier series model and input parameter of latitude.Based on the on-orbit installation parameters and the ALFE model,the precise attitude determination results of the unconventional mode are calculated.Experimental results show that the attitude determination consistency after compensation is better than 2″.Moreover,the reliable application time range of the compensation model is 30 days to satisfy the requirements for high-precision attitude determination of GF7 satellite.
文摘Aim To derive the error formulae for the algorithm of frequency response computation. Methods This algorithm was introduced theoretically, the error sources of the algorithm were analyzed and the formulae of the main error were derived. Results The repeatability and stability of the processing results of the algorithm are better than those measured by 1250 Frequency Analysor. Conclusion The error formulae derived are theoretically right and practically valid.
文摘Joint Radar and Communications(JRC)can implement two Radio Frequency(RF)functions using a single of resources,providing significant hardware,power and spectrum savings for wireless systems requiring both functions.Frequency-Hopping(FH)MIMO radar is a popular candidate for JRC because the achieved communication symbol rate can greatly exceed the radar pulse repetition frequency.However,practical transceiver imperfections can cause many existing theoretical designs to fail.In this work,we reveal for the first time the non-trivial impact of hardware imperfections on FH-MIMO JRC and model the impact analytically.We also design new waveforms and correspondingly develop a low-complexity algorithm to jointly estimate the hardware imperfections of unsynchronized receiver.In addition,using low-cost software-defined radios and Commercial Off-The-Shelf(COTS)products,we build the first FH-MIMO JRC experimental platform with simultaneous over-the-air radar and communication validation.Confirmed by simulation and experimental results,the proposed designs achieve high performance for both radar and communications.
基金National Natural Science Foundation of China(61004081,11126033)School Advanced Research Foundation of National University of Defense Technology (JC11-02-22)
文摘The low-frequency periodic error of star tracker is one of the most critical problems for high-accuracy satellite attitude determination.In this paper an approach is proposed to identify and compensate the low-frequency periodic error for star tracker in attitude measurement.The analytical expression between the estimated gyro drift and the low-frequency periodic error of star tracker is derived firstly.And then the low-frequency periodic error,which can be expressed by Fourier series,is identified by the frequency spectrum of the estimated gyro drift according to the solution of the first step.Furthermore,the compensated model of the low-frequency periodic error is established based on the identified parameters to improve the attitude determination accuracy.Finally,promising simulated experimental results demonstrate the validity and effectiveness of the proposed method.The periodic error for attitude determination is eliminated basically and the estimation precision is improved greatly.
文摘This paper surveys a number of recent advances in the error analysis in the frequency domain for a digital simulation model. It is emphasized to discuss the errors in characteristic roots and transfer funcnon of the digital simulation model, the frequency domain errors of the data transfers between thesimulation submodels, and some compensation methods for the errors. Some of the questions to be answered are also presented.
基金This project was supported by the National Natural Science Foundation of China (No. 19871080).
文摘Error analysis methods in frequency domain are developed in this paper for determining the characteristic root and transfer function errors when the linear multipass algorithms are used to solve linear differential equations. The relation between the local truncation error in time domain and the error in frequency domain is established, which is the basis for developing the error estimation methods. The error estimation methods for the digital simulation model constructed by using the Runge-Kutta algorithms and the linear multistep predictor-corrector algorithms are also given.
基金Project supported by the National Natural Science Foundation of China (No. 10876100)
文摘Based on the concept of the constitutive relation error along with the residuals of both the origin and the dual problems, a goal-oriented error estimation method with extended degrees of freedom is developed. It leads to the high quality locM error bounds in the problem of the direct-solution steady-state dynamic analysis with a frequency-domain finite element, which involves the enrichments with plural variable basis functions. The solution of the steady-state dynamic procedure calculates the harmonic response directly in terms of the physical degrees of freedom in the model, which uses the mass, damping, and stiffness matrices of the system. A three-dimensional finite element example is carried out to illustrate the computational procedures.
基金supported by the National Natural Science Foundation of China(61271327)
文摘Bistatic/multistatic radar has great potential advantages over its monostatic counterpart. However, the separation of a transmitter and a receiver leads to difficulties in locating the target position accurately and guaranteeing space-timefrequency synchronization of the transmitter and the receiver.The error model of space-time-frequency synchronization in a motion platform of bistatic/multistatic radar is studied. The relationship between the space synchronization error and the transmitter platform position, receiver platform position, moving state, and beam pointing error, is analyzed. The effect of space synchronization error on target echo power is studied. The target scattering characteristics are restructured by many separate scattering centers of the target in high frequency regions. Based on the scattering centers model of the radar target, this radar target echo model and the simulation method are discussed. The algorithm of bistatic/multistatic radar target echo accurately reflects the scattering characteristics of the radar target, pulse modulation speciality of radar transmitting signals, and spacetime-frequency synchronization error characteristics between the transmitter station and the receiver station. The simulation of bistatic radar is completed in computer, and the results of the simulation validate the feasibility of the method.
文摘In this paper, we proposed an output voltage stabilization of a DC-DC Zeta converter using hybrid control. We modeled the Zeta converter under continuous conduction mode operation. We derived a switching control law that brings the output voltage to the desired level. Due to infinite switching occurring at the desired level, we enhanced the switching control law by allowing a sizeable output voltage ripple. We derived mathematical models that allow one to choose the desired switching frequency. In practice, the existence of the non-ideal properties of the Zeta converter results in steady-state output voltage error. By analyzing the power loss in the zeta converter, we proposed an improved switching control law that eliminates the steady-state output voltage error. The effectiveness of the proposed method is illustrated with simulation results.
文摘Mid-frequency wavefront errors can be of the most importance for some optical components, but they're not explicitly covered by corresponding international standards such as ISO 10110. The testing methods for the errors also have a lot of aspects to be improved. This paper gives an overview of the specifications especially of PSD. NIF, developed by America, and XMM, developed by Europe, have both discovered some new testing methods.
基金supported by the National Natural Science Foundation of China(60872026)the Natural Science Foundation of Tianjin(09JCZDJC16900)
文摘This paper presents an algorithm that aims to reduce the peak-to-average power ratio（PAPR） of orthogonal frequency division multiplexing（OFDM） communication systems while maintaining frequency tracking.The algorithm achieves PAPR reduction by applying the complex conjugates of the data symbol obtained from the frequency domain to cancel the phase of the data symbol.A likelihood estimator is used to obtain the sub-carrier phase error due to the residual carrier frequency offset（RCFO） using the same complex conjugates as a pilot signal.Furthermore,a joint time and frequency domain multicarrier phase locked loop（MPLL） is developed to compensate additional frequency offset.Simulation results show that this algorithm is capable of reducing PAPR without impacting the frequency tracking performance.
基金supported by the National Natural Science Foundation of China(6112010600461225005)
文摘A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This method is based on accurate estimation and correction of the phase and amplitude error along two dimensions（range and azimuth）, i.e., the error estimation inside the subpulse（in-subpulse error） and across the stepped frequency subpulses（cross-subpulse error） of transmitted CSSF signals. Validated both with simulated data and experimental data recorded in the deformation monitoring campaign, it can be seen that the method as well as the relative conclusions can be fully and effectively applied to most of the stepped frequency systems.
基金in part by the National Natural Science Foundation of China under Grant 61771291,Grant 61671278in part by the Key Research and Development Project of Shandong Province under Grant 2018GGX101009,Grant 2019TSLH0202,Grant 2020CXGC010109+1 种基金in part by the National Nature Science Foundation of China for Excellent Young Scholars under Grant 61622111in part by the Project of International Cooperation and Exchanges NSFC under Grant 61860206005.
文摘In this paper,we design a spatial modulation based orthogonal time frequency space(SMOTFS)system to achieve improved transmission reliability and meet the high transmission rate and highspeed demands of future mobile communications,which fully utilizes the characteristics of spatial modulation(SM)and orthogonal time frequency space(OTFS)transmission.The detailed system design and signal processing of the SM-OTFS system have been presented.The closed-form expressions of the average symbol error rate(ASER)and average bit error rate(ABER)of the SM-OTFS system have been derived over the delay-Doppler channel with the help of the union bounding technique and moment-generating function(MGF).Meanwhile,the system complexity has been evaluated.Numerical results verify the correctness of the theoretical ASER and ABER analysis of the SM-OTFS system in the high signal-to-noise ratio(SNR)regions and also show that the SM-OTFS system outperforms the traditional SM based orthogonal frequency division multiplexing(SM-OFDM)system with limited complexity increase under mobile conditions,especially in high mobility scenarios.
文摘The problem of estimating direction of arrivals (DOA) and Doppler frequency for many sources is considered in the presence of general array errors (such as amplitude and phase error of sensors, setting position error of sensors). Adopting direct array manifold in a uniform circular array (UCA), the estimation of Doppler frequency can be obtained by DOA matrix. Based on analyzing the statistic characters of general array errors, the estimation of DOA can be obtained by Weight Total Least Squares. Numerical results illustrate that the estimator is robust to general array errors and show the capabilities of the estimator.
文摘Aperture-dependent motion compensation is important for wide beam Synthetic Aperture Radar(SAR) data processing.This paper studies a wide beam motion compensation algorithm based on frequency division.It takes blocks along azimuth dimension in frequency domain and applies an-gle-variant motion compensation in time domain.With this frequency division based motion com-pensation approach,the effects of aperture-dependent residual phase errors are corrected precisely.The rationale and procedure of this algorithm are introduced in detail.Point targets and images of a P-band airborne SAR with motion errors are simulated to validate this algorithm.Compared with the wide beam motion compensation algorithms based on time division,the proposed algorithm has better performance,especially in terms of high-frequency motion errors.
基金the Specialized Research Fund for the Doctoral Program of Higher Education, China Ministry of Education (No.20030003039).
文摘This paper investigates Carrier Frequency Offset (CFO) estimation in the uplink of the Orthogonal Frequency-Division Multiple Access (OFDMA) systems with the interleaved subcarrier assignment. CFOs between the transmitters and the uplink receiver will destroy orthogonality among different subcarriers, hence resulting in inter-carrier interference and multiuser interference. A two-stage frequency offset estimation algorithm based on subspace processing is proposed. The main advantage of the proposed method is that it can obtain the CFOs of all users simultaneously using only one OFDMA block. Compared with the previously known methods, it not only has a relatively low implementation complexity but is also suitable for random subchannel assignment.
文摘An unsupervised minimum mean square error FIR adaptive filtering （UAF） algorithm is proposed to estimate the system＇ s input signal. The algorithm only uses the system＇ s output signal and noise variance without requiring knowledge of a reference signal. The frequency analysis shows that the UAF is a multi-spot bandpass filter with passing frequency determined by the system＇ s input signal. Namely, the UAF chooses the expected frequency and extremely restricts the unwanted fre- quency signal by using weight-updating scheme in time domain. However, the UAF presents the Gibbs phenomenon since the ideal filter is infinitely long which is unrealizable. The simulation and experimental results show that the UAF could effectively reduce the amplitude of the noise and im- prove the signal to noise ratio.
