This research has focused on the treatment of zinc flue dust by an acid leach process, combining an environmentally suitable impurity removal process to recover cadmium. Optimum conditions were found as follows： H2SO...This research has focused on the treatment of zinc flue dust by an acid leach process, combining an environmentally suitable impurity removal process to recover cadmium. Optimum conditions were found as follows： H2SO4 concentration 90 g/L, liquid/solid ratio 6：1, leaching temperature 60 ℃ and leaching time 1.0 h. Under these conditions, 95.8% cadmium was recovered. FeAsO4 and Fe（OH）3 precipitates with FeCI3 are found to be highly effective to obtain a high degree of separation of heavy metals and the oxyanions of arsenic from the leachate. The overall separation of arsenic and other heavy metals and precipitate settling rates are optimum at n（Fe）/n（As） ratio of 3：l and pH 6. The removal rates ofFe, Pb and Cu from the solution were greater than 98.9%, and As removal rate was 99.6%. A solvent extraction with P204 was used for the separation of zinc and cadmium. Optimum conditions are obtained as follows： 20% P204 （volume fraction） diluted with kerosene at room temperature, pH 3.0, and varying organic/aqueous （O/A） phase ratio 1：1. The extraction rate of zinc is 99.2% under these conditions. Spherical cadmium particles showing nearly uniform size were produced by hydrogen reduction at 310 ℃ and the crystal structure was cubic. In addition, the purity of the recovered cadmium powder is more than 99.99%.展开更多
With narrow red photoluminescence (PL) bands, tetravalent Mn^(4+) doped phosphors show promising prospect in commercial application to effectively expand color gamut of phosphor converted LED displays. Here, we report...With narrow red photoluminescence (PL) bands, tetravalent Mn^(4+) doped phosphors show promising prospect in commercial application to effectively expand color gamut of phosphor converted LED displays. Here, we report a type of Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) phosphors with regular cage-like micro-spherical morphologies. The micron size spherical precursors were synthesized with a propylene oxide (PO) driven fast sol–gel method. The cage -like spherical morphology is beneficial to efficiently trapping much incident light to enhance the PL of the phosphors. Being calcined at 1300 ℃, Sr_(2)MgAl_(21.978)O_(36):0.022Mn^(4+) only exhibits the internal quantum efficiency (IQE) of 24.91%. With the Mg^(2+)-Mn^(4+) codoping and Y^(3+)/Sr^(2+) substituting strategies, to fulfill charge balance and produce John-Teller distortion, IQE of Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) can be further improved up to 36.45%. The CIE color coordinates of Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) under near ultraviolet excitation can be stably fixed to (0.723, 0.227) at deep red region. It thus finds a potential application as pc-LED display with much broader color gamut than that of the NTSC standard. Therefore, Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) micron size spheres can be employed as promising red phosphors for high performance LED displays.展开更多
文摘This research has focused on the treatment of zinc flue dust by an acid leach process, combining an environmentally suitable impurity removal process to recover cadmium. Optimum conditions were found as follows： H2SO4 concentration 90 g/L, liquid/solid ratio 6：1, leaching temperature 60 ℃ and leaching time 1.0 h. Under these conditions, 95.8% cadmium was recovered. FeAsO4 and Fe（OH）3 precipitates with FeCI3 are found to be highly effective to obtain a high degree of separation of heavy metals and the oxyanions of arsenic from the leachate. The overall separation of arsenic and other heavy metals and precipitate settling rates are optimum at n（Fe）/n（As） ratio of 3：l and pH 6. The removal rates ofFe, Pb and Cu from the solution were greater than 98.9%, and As removal rate was 99.6%. A solvent extraction with P204 was used for the separation of zinc and cadmium. Optimum conditions are obtained as follows： 20% P204 （volume fraction） diluted with kerosene at room temperature, pH 3.0, and varying organic/aqueous （O/A） phase ratio 1：1. The extraction rate of zinc is 99.2% under these conditions. Spherical cadmium particles showing nearly uniform size were produced by hydrogen reduction at 310 ℃ and the crystal structure was cubic. In addition, the purity of the recovered cadmium powder is more than 99.99%.
基金Project supported by the National Natural Science Foundation of China (51872255,51672243)。
文摘With narrow red photoluminescence (PL) bands, tetravalent Mn^(4+) doped phosphors show promising prospect in commercial application to effectively expand color gamut of phosphor converted LED displays. Here, we report a type of Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) phosphors with regular cage-like micro-spherical morphologies. The micron size spherical precursors were synthesized with a propylene oxide (PO) driven fast sol–gel method. The cage -like spherical morphology is beneficial to efficiently trapping much incident light to enhance the PL of the phosphors. Being calcined at 1300 ℃, Sr_(2)MgAl_(21.978)O_(36):0.022Mn^(4+) only exhibits the internal quantum efficiency (IQE) of 24.91%. With the Mg^(2+)-Mn^(4+) codoping and Y^(3+)/Sr^(2+) substituting strategies, to fulfill charge balance and produce John-Teller distortion, IQE of Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) can be further improved up to 36.45%. The CIE color coordinates of Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) under near ultraviolet excitation can be stably fixed to (0.723, 0.227) at deep red region. It thus finds a potential application as pc-LED display with much broader color gamut than that of the NTSC standard. Therefore, Sr_(2-z)Mg_(1+y)Y_(z)Al_(22-x)O_(36):xMn^(4+) micron size spheres can be employed as promising red phosphors for high performance LED displays.
