This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standar...This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standard system was established for comprehensive quality evaluation of HTD.There were obvious changes in the physicochemical properties,enzyme activities,and volatile flavor components at different storage periods,which affected the sensory evaluation of HTD to a certain extent.The results of high-throughput sequencing revealed significant microbial diversity,and showed that the bacterial community changed significantly more than did the fungal community.During the storage process,the dominant bacterial genera were Kroppenstedtia and Thermoascus.The correlation between dominant microorganisms and quality indicators highlighted their role in HTD quality.Lactococcus,Candida,Pichia,Paecilomyces,and protease activity played a crucial role in the formation of isovaleraldehyde.Acidic protease activity had the greatest impact on the microbial community.Moisture promoted isobutyric acid generation.Furthermore,the comprehensive quality evaluation standard system was established by the entropy weight method combined with multi-factor fuzzy mathematics.Consequently,this study provides innovative insights for comprehensive quality evaluation of HTD during storage and establishes a groundwork for scientific and rational storage of HTD and quality control of sauce-flavor Baijiu.展开更多
Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extens...Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extensive attention due to their advantages of small size,high multiplexing efficiency,convenient mass production,and low cost.An RGB beam combiner based on directional couplers is designed,with a core-cladding relative refractive index difference of 0.75%.The RGB beam combiner is optimized from the perspective of parameter optimization.Using the beam propagation method(BPM),the relationship between the performance of the RGB beam combiner and individual parameters is studied,achieving preliminary optimization of the device’s performance.The key parameters of the RGB beam combiner are optimized using the entropy weight-technique for order preference by similarity to an ideal solution TOPSIS method,establishing the optimal parameter scheme and further improving the device’s performance indicators.The results show that after optimization,the multiplexing efficiencies for red,green,and blue lights,as well as the average multiplexing efficiency,reached 99.17%,99.76%,96.63%and 98.52%,respectively.The size of the RGB beam combiner is 4.768 mm×0.062 mm.展开更多
As a key sector in advancing China’s“carbon neutrality”goal,the machinery manufacturing industry has achieved remarkable development in recent years.Against this backdrop,the scientific and objective evaluation of ...As a key sector in advancing China’s“carbon neutrality”goal,the machinery manufacturing industry has achieved remarkable development in recent years.Against this backdrop,the scientific and objective evaluation of the financial performance of machinery manufacturing enterprises has become a pressing issue in financial research.This topic is not only crucial for optimizing enterprise management and improving operational efficiency but also essential for enhancing overall industry performance and promoting sustainable development.This paper first introduces the concept of financial performance,followed by an analysis of related financial performance evaluation theories.It then focuses on the application of the entropy method in evaluating the financial performance of machinery manufacturing enterprises,detailing its analytical steps.Finally,a financial performance evaluation index system is constructed based on four dimensions:profitability,solvency,operational efficiency,and growth potential.展开更多
The joint roughness coefficient(JRC) is one of the key parameters for evaluating the shear strength of rock joints.Because of the scale effect in the JRC,reliable JRC values are of great importance for most rock engin...The joint roughness coefficient(JRC) is one of the key parameters for evaluating the shear strength of rock joints.Because of the scale effect in the JRC,reliable JRC values are of great importance for most rock engineering projects.During the collection process of JRC samples,the redundancy or insufficiency of representative rock joint surface topography(RJST) information in serial length JRC samples is the essential reason that affects the reliability of the scale effect results.Therefore,this paper proposes an adaptive sampling method,in which we use the entropy consistency measure Q(a) to evaluate the consistency of the joint morphology information contained in adjacent JRC samples.Then the sampling interval is automatically adjusted according to the threshold Q(at) of the entropy consistency measure to ensure that the degree of change of RJST information between JRC samples is the same,and ultimately makes the representative RJST information in the collected JRC samples more balanced.The application results of actual cases show that the proposed method can obtain the scale effect in the JRC efficiently and reliably.展开更多
This study is connected with new Generalized Maximum Fuzzy Entropy Methods （GMax（F）EntM） in the form of MinMax（F）EntM and MaxMax（F）EntM belonging to us. These methods are based on primary maximizing Max（F）En...This study is connected with new Generalized Maximum Fuzzy Entropy Methods （GMax（F）EntM） in the form of MinMax（F）EntM and MaxMax（F）EntM belonging to us. These methods are based on primary maximizing Max（F）Ent measure for fixed moment vector function in order to obtain the special functional with maximum values of Max（F）Ent measure and secondary optimization of mentioned functional with respect to moment vector functions. Distributions, in other words sets of successive values of estimated membership function closest to （furthest from） the given membership function in the sense of Max（F）Ent measure, obtained by mentioned methods are defined as （MinMax（F）Ent）m which is closest to a given membership function and （MaxMax（F）Ent）m which is furthest from a given membership function. The aim of this study consists of applying MinMax（F）EntM and MaxMax（F）EntM on given wind speed data. Obtained results are realized by using MATLAB programme. The performances of distributions （MinMax（F）En0m and （MaxMax（F）Ent）m generated by using Generalized Maximum Fuzzy Entropy Methods are established by Chi-Square, Root Mean Square Error criterias and Max（F）Ent measure.展开更多
In the multilevel thresholding segmentation of the image, the classification number is always given by the supervisor. To solve this problem, a fast multilevel thresholding algorithm considering both the threshold val...In the multilevel thresholding segmentation of the image, the classification number is always given by the supervisor. To solve this problem, a fast multilevel thresholding algorithm considering both the threshold value and the classification number is proposed based on the maximum entropy, and the self-adaptive criterion of the classification number is given. The algorithm can obtain thresholds and automatically decide the classification number. Experimental results show that the algorithm is effective.展开更多
This paper presents an analytical, numerical, and experimental study on atomization characteristics and droplet distribution of a twin-fluid two-phase internal mixing atomizer to develop a Maximum Entropy Method(MEM)....This paper presents an analytical, numerical, and experimental study on atomization characteristics and droplet distribution of a twin-fluid two-phase internal mixing atomizer to develop a Maximum Entropy Method(MEM). A two-phase Eulerian-Lagrangian method is utilized for atomization modeling of the inside and outside atomizer. In order to modify energy and momentum sources in the MEM, parametric studies are performed, and experimental tests are carried out to verify the results by applying the shadowgraph method. An advanced test stand is developed to prepare a wide range of changes in atomization characteristics and mixing ratios. A high degree of consistency is found between numerical results from the developed MEM and experimental tests with different gas-phase pressures and liquid flow rates. The droplet diameter and velocity distribution are reviewed based on various Weber numbers, sources of energy, and momentum. Turbulence modeling assists to estimate the breakup length and time scale precisely in the developed MEM, and distribution ranges with mean values are achieved. With reference to a strong correlation between upstream turbulence flow and the developed MEM verified by experimental tests, an ideal droplet size and velocity distribution prediction is observed.展开更多
A passive and multi-channel microwave sounder onboard the Chang＇e-2 orbiter has successfully acquired microwave observations of the lunar surface and subsurface structure. Compared with the Chang＇e-1 orbiter, the Ch...A passive and multi-channel microwave sounder onboard the Chang＇e-2 orbiter has successfully acquired microwave observations of the lunar surface and subsurface structure. Compared with the Chang＇e-1 orbiter, the Chang＇e-2 orbiter obtained more accurate and comprehensive microwave brightness temperature data, which are helpful for further research. Since there is a close relationship between mi- crowave brightness temperature data and some related properties of the lunar regolith, such as the thickness, temperature and dielectric constant, precise and high resolution brightness temperature data are necessary for such research. However, through the detection mechanism of the microwave sounder, the brightness temperature data ac- quired from the microwave sounder are weighted by the antenna radiation pattern, so the data are the convolution of the antenna radiation pattern with the lunar brightness temperature. In order to obtain the real lunar brightness temperature, a deconvolution method is needed. The aim of this paper is to solve the problem associated with per- forming deconvolution of the lunar brightness temperature. In this study, we introduce the maximum entropy method （MEM） to process the brightness temperature data and achieve excellent results. The paper mainly includes the following aspects： first, we introduce the principle of the MEM; second, through a series of simulations, the MEM has been verified as an efficient deconvolution method; and third, the MEM is used to process the Chang＇e-2 microwave data and the results are significant.展开更多
Excellent results are obtained in structure analysis with jew phases of structure factors by the maximum-entropy method (MEM) for CaGaN PbCO3 and ReBe22 single crystals. The computation time and memory space are minim...Excellent results are obtained in structure analysis with jew phases of structure factors by the maximum-entropy method (MEM) for CaGaN PbCO3 and ReBe22 single crystals. The computation time and memory space are minimized by symmetry operations so that structure analysis by the MEM can be carried out with a personal computer.展开更多
This paper addresses the problem of complex and challenging disturbance localization in the current power system operation environment by proposing a disturbance localization method for power systems based on group sp...This paper addresses the problem of complex and challenging disturbance localization in the current power system operation environment by proposing a disturbance localization method for power systems based on group sparse representation and entropy weight method.Three different electrical quantities are selected as observations in the compressed sensing algorithm.The entropy weighting method is employed to calculate the weights of different observations based on their relative disturbance levels.Subsequently,by leveraging the topological information of the power system and pre-designing an overcomplete dictionary of disturbances based on the corresponding system parameter variations caused by disturbances,an improved Joint Generalized Orthogonal Matching Pursuit(J-GOMP)algorithm is utilized for reconstruction.The reconstructed sparse vectors are divided into three parts.If at least two parts have consistent node identifiers,the node is identified as the disturbance node.If the node identifiers in all three parts are inconsistent,further analysis is conducted considering the weights to determine the disturbance node.Simulation results based on the IEEE 39-bus system model demonstrate that the proposed method,utilizing electrical quantity information from only 8 measurement points,effectively locates disturbance positions and is applicable to various disturbance types with strong noise resistance.展开更多
A method which is especially suitable for microcomputer calculation of the true orientation distribution function (ODF) according to the maximum-entropy estimate is proposed for hexagonal system polycrystalline materi...A method which is especially suitable for microcomputer calculation of the true orientation distribution function (ODF) according to the maximum-entropy estimate is proposed for hexagonal system polycrystalline materials with physical symmetry.The resultant computational software system has been also designed and first carried out in a microcomputer PANAFACOM-U1200 being on line with the X-ray diffractometer D/max-3A.The simu- lated calculation shows that the method is concisely pragmatic and easily popularized,while the results obtained are trust worthy.展开更多
Iteration methods and their convergences of the maximum likelihoodestimator are discussed in this paper.We study Gauss-Newton method and give a set ofsufficient conditions for the convergence of asymptotic numerical s...Iteration methods and their convergences of the maximum likelihoodestimator are discussed in this paper.We study Gauss-Newton method and give a set ofsufficient conditions for the convergence of asymptotic numerical stability.The modifiedGauss-Newton method is also studied and the sufficient conditions of the convergence arepresented.Two numerical examples are given to illustrate our results.展开更多
It is important to know the maximum solid solubility( C max ) of various transition metals in a metal when one designs multi component alloys. There have been several semi empirical approaches to qualitatively predict...It is important to know the maximum solid solubility( C max ) of various transition metals in a metal when one designs multi component alloys. There have been several semi empirical approaches to qualitatively predict the C max , such as Darken Gurry(D G) theorem, Miedema Chelikowsky(M C) theorem, electron concentration rule and the bond parameter rule. However, they are not particularly valid for the prediction of C max . It was developed on the basis of energetics of alloys as a new method to predict C max of different transition metals in metal Ti, which can be described as a semi empirical equation using the atomic parameters, i e, electronegativity difference, atomic diameter and electron concentration. It shows that the present method can be used to explain and deduce D G theorem, M C theorem and electron concentration rule.展开更多
In this paper, survival data analysis is realized by applying Generalized Entropy Optimization Methods (GEOM). It is known that all statistical distributions can be obtained as distribution by choosing corresponding m...In this paper, survival data analysis is realized by applying Generalized Entropy Optimization Methods (GEOM). It is known that all statistical distributions can be obtained as distribution by choosing corresponding moment functions. However, Generalized Entropy Optimization Distributions (GEOD) in the form of distributions which are obtained on basis of Shannon measure and supplementary optimization with respect to characterizing moment functions, more exactly represent the given statistical data. For this reason, survival data analysis by GEOD acquires a new significance. In this research, the data of the life table for engine failure data (1980) is examined. The performances of GEOD are established by Chi-Square criteria, Root Mean Square Error (RMSE) criteria and Shannon entropy measure, Kullback-Leibler measure. Comparison of GEOD with each other in the different senses shows that along of these distributions (MinMaxEnt)4 is better in the senses of Shannon measure and of Kullback-Leibler measure. It is showed that, (MinMaxEnt)3 ((MaxMaxEnt)4) is more suitable for statistical data among (MinMaxEnt)m,m=1,2,3,4(MaxMaxEnt)m,m=1,2,3,4. Moreover, (MinMaxEnt)3 is better for statistical data than (MaxMaxEnt)4 in the sense of RMSE criteria. According to obtained distribution (MinMaxEnt)3 (MaxMaxEnt)4 estimator of Probability Density Function?f^?(t), Cumulative Distribution Functio?F^ (t) , Survival Function Ŝ(t) and Hazard Rate ĥ(t) are evaluated and graphically illustrated. The results are acquired by using statistical software MATLAB.展开更多
Based on the maximunl-entropy （ME） principle, a new power spectral estimator for random waves is derived in the form of S（ω）=a/8H^2^-（2π）^（d＋2）exp[-b（2π/ω）^n],1）y solving a variational problem subject ...Based on the maximunl-entropy （ME） principle, a new power spectral estimator for random waves is derived in the form of S（ω）=a/8H^2^-（2π）^（d＋2）exp[-b（2π/ω）^n],1）y solving a variational problem subject to some quite general constraints. This robust method is comprehensive enough to describe the wave spectra even in extreme wave conditions and is superior to periodogranl method that is not suit＇able to process comparatively short or intensively unsteady signals for its tremendous boundary effect and some inherent defects of FKF. Fortunately, the newly derived method for spectral estimation works fairly well, even though the sample data sets are very short and unsteady, and the reliability and efficiency of this spectral estimator have been preliminarily proved.展开更多
The Maximum-entropy Method(MEM)for determining the complete ODF(orientation distribution function),accompanied with the equal-volume partitioning technique for quantitative texture analysis,was first tested in analysi...The Maximum-entropy Method(MEM)for determining the complete ODF(orientation distribution function),accompanied with the equal-volume partitioning technique for quantitative texture analysis,was first tested in analysing the texture of a commercial purity titanium strip.The experimentally measured results indi- cate that the rolling planes of most grains in this sample are parallel to the{1010}and the{1210}with about ~±10°spread while the rolling directions nearly distribute uniformly and their volume fractions are 19.46％ and 18.70％ respectively.Besides,there are still two weaker texture components,(7526)[1544]and (1105)[2311],with 3.24％and 4.17％respectively.展开更多
[Objective] The aim was to propose a new entropy weight fuzzy compre- hensive evaluation method for assessing cotton salt tolerance, realizing the objective, accurate and comprehensive evaluation of salt tolerance of ...[Objective] The aim was to propose a new entropy weight fuzzy compre- hensive evaluation method for assessing cotton salt tolerance, realizing the objective, accurate and comprehensive evaluation of salt tolerance of cotton. [Method] A sand culture experiment under salt stress of 150 mmol/L of NaCI was designed. The in- dicator weight was determined with the entropy weight fuzzy comprehensive evalu- ation method, based on the salt injury index of indicators. The salt tolerance of cotton was evaluated comprehensively. [Result] At the germination stage, the entropy and weight of salt injury index of germination energy, vigor index, hypocotyl length and fresh weight were highest, followed by germination rate and germination index, and of root length were lowest. At the seedling stage, the entropy and weight of salt injury index of plasma membrane permeability, root vigor and leaf expansion rate were highest, followed by plant height and net photosynthetic rate, and of shoot dry weight and root dry weight were lowest. The salt tolerance of cotton differed a- mong growth stages and cultivars. Among the 11 cultivars, CCRI-44 and CCRI-75 were steadily salt-tolerant at both germination and seedling stages; CCRI-17, Sumi- an 22, Sumian 15 and Dexiamianl had a stable moderate salt tolerance; while Sumian 12 and Simian 3 were steadily salt-sensitive. [Conclusion] The evaluated result was objective and exact, which indicated that this method could be used in comprehensive evaluation of salt tolerance of cotton.展开更多
Two dimensional(2 D) entropy method has to pay the price of time when applied to image segmentation. So the genetic algorithm is introduced to improve the computational efficiency of the 2 D entropy method. The pro...Two dimensional(2 D) entropy method has to pay the price of time when applied to image segmentation. So the genetic algorithm is introduced to improve the computational efficiency of the 2 D entropy method. The proposed method uses both the gray value of a pixel and the local average gray value of an image. At the same time, the simple genetic algorithm is improved by using better reproduction and crossover operators. Thus the proposed method makes up the 2 D entropy method’s drawback of being time consuming, and yields satisfactory segmentation results. Experimental results show that the proposed method can save computational time when it provides good quality segmentation.展开更多
[Objective] This study was to provide references for the evaluation of water quality in aquaculture ponds by evaluating the pond water quality using fuzzy comprehensive evaluation method based on entropy weight. [Meth...[Objective] This study was to provide references for the evaluation of water quality in aquaculture ponds by evaluating the pond water quality using fuzzy comprehensive evaluation method based on entropy weight. [Method] The fuzzy compre- hensive evaluation method based on entropy weight was used to evaluate the water quality in the ponds with Ukraine scale carp （Cyprinus carpio） as the main cultivated fish. The average size of the fish was 71.4 g/ind, and totally three groups of pond were set with the population density of 6 000, 9 000, 12 000 ind/hm2. [Result] According to the GB3838-2002 Environmental Quality Standards for Surface Water of China, the water quality of 6 000 ind/hm2 group was Grade I, and the water quality of 9 000 and 12 000 ind/hm2 were Grade V. [Conclusion] With the increasing of feeding density, the pond water quality would worsen, however, there is no difference on water quality between 9 000 and 12 000 ind/hm2 groups.展开更多
文摘This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standard system was established for comprehensive quality evaluation of HTD.There were obvious changes in the physicochemical properties,enzyme activities,and volatile flavor components at different storage periods,which affected the sensory evaluation of HTD to a certain extent.The results of high-throughput sequencing revealed significant microbial diversity,and showed that the bacterial community changed significantly more than did the fungal community.During the storage process,the dominant bacterial genera were Kroppenstedtia and Thermoascus.The correlation between dominant microorganisms and quality indicators highlighted their role in HTD quality.Lactococcus,Candida,Pichia,Paecilomyces,and protease activity played a crucial role in the formation of isovaleraldehyde.Acidic protease activity had the greatest impact on the microbial community.Moisture promoted isobutyric acid generation.Furthermore,the comprehensive quality evaluation standard system was established by the entropy weight method combined with multi-factor fuzzy mathematics.Consequently,this study provides innovative insights for comprehensive quality evaluation of HTD during storage and establishes a groundwork for scientific and rational storage of HTD and quality control of sauce-flavor Baijiu.
基金Project(52175445)supported by the National Natural Science Foundation of ChinaProject(2022JJ30743)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(2023GK2024)supported by the Key Research and Development Program of Hunan Province,ChinaProject(2023ZZTS0391)supported by the Fundamental Research Funds for the Central Universities of China。
文摘Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extensive attention due to their advantages of small size,high multiplexing efficiency,convenient mass production,and low cost.An RGB beam combiner based on directional couplers is designed,with a core-cladding relative refractive index difference of 0.75%.The RGB beam combiner is optimized from the perspective of parameter optimization.Using the beam propagation method(BPM),the relationship between the performance of the RGB beam combiner and individual parameters is studied,achieving preliminary optimization of the device’s performance.The key parameters of the RGB beam combiner are optimized using the entropy weight-technique for order preference by similarity to an ideal solution TOPSIS method,establishing the optimal parameter scheme and further improving the device’s performance indicators.The results show that after optimization,the multiplexing efficiencies for red,green,and blue lights,as well as the average multiplexing efficiency,reached 99.17%,99.76%,96.63%and 98.52%,respectively.The size of the RGB beam combiner is 4.768 mm×0.062 mm.
文摘As a key sector in advancing China’s“carbon neutrality”goal,the machinery manufacturing industry has achieved remarkable development in recent years.Against this backdrop,the scientific and objective evaluation of the financial performance of machinery manufacturing enterprises has become a pressing issue in financial research.This topic is not only crucial for optimizing enterprise management and improving operational efficiency but also essential for enhancing overall industry performance and promoting sustainable development.This paper first introduces the concept of financial performance,followed by an analysis of related financial performance evaluation theories.It then focuses on the application of the entropy method in evaluating the financial performance of machinery manufacturing enterprises,detailing its analytical steps.Finally,a financial performance evaluation index system is constructed based on four dimensions:profitability,solvency,operational efficiency,and growth potential.
基金supported by the National Natural Science Foundation of China(No.42207175)。
文摘The joint roughness coefficient(JRC) is one of the key parameters for evaluating the shear strength of rock joints.Because of the scale effect in the JRC,reliable JRC values are of great importance for most rock engineering projects.During the collection process of JRC samples,the redundancy or insufficiency of representative rock joint surface topography(RJST) information in serial length JRC samples is the essential reason that affects the reliability of the scale effect results.Therefore,this paper proposes an adaptive sampling method,in which we use the entropy consistency measure Q(a) to evaluate the consistency of the joint morphology information contained in adjacent JRC samples.Then the sampling interval is automatically adjusted according to the threshold Q(at) of the entropy consistency measure to ensure that the degree of change of RJST information between JRC samples is the same,and ultimately makes the representative RJST information in the collected JRC samples more balanced.The application results of actual cases show that the proposed method can obtain the scale effect in the JRC efficiently and reliably.
文摘This study is connected with new Generalized Maximum Fuzzy Entropy Methods （GMax（F）EntM） in the form of MinMax（F）EntM and MaxMax（F）EntM belonging to us. These methods are based on primary maximizing Max（F）Ent measure for fixed moment vector function in order to obtain the special functional with maximum values of Max（F）Ent measure and secondary optimization of mentioned functional with respect to moment vector functions. Distributions, in other words sets of successive values of estimated membership function closest to （furthest from） the given membership function in the sense of Max（F）Ent measure, obtained by mentioned methods are defined as （MinMax（F）Ent）m which is closest to a given membership function and （MaxMax（F）Ent）m which is furthest from a given membership function. The aim of this study consists of applying MinMax（F）EntM and MaxMax（F）EntM on given wind speed data. Obtained results are realized by using MATLAB programme. The performances of distributions （MinMax（F）En0m and （MaxMax（F）Ent）m generated by using Generalized Maximum Fuzzy Entropy Methods are established by Chi-Square, Root Mean Square Error criterias and Max（F）Ent measure.
文摘In the multilevel thresholding segmentation of the image, the classification number is always given by the supervisor. To solve this problem, a fast multilevel thresholding algorithm considering both the threshold value and the classification number is proposed based on the maximum entropy, and the self-adaptive criterion of the classification number is given. The algorithm can obtain thresholds and automatically decide the classification number. Experimental results show that the algorithm is effective.
文摘This paper presents an analytical, numerical, and experimental study on atomization characteristics and droplet distribution of a twin-fluid two-phase internal mixing atomizer to develop a Maximum Entropy Method(MEM). A two-phase Eulerian-Lagrangian method is utilized for atomization modeling of the inside and outside atomizer. In order to modify energy and momentum sources in the MEM, parametric studies are performed, and experimental tests are carried out to verify the results by applying the shadowgraph method. An advanced test stand is developed to prepare a wide range of changes in atomization characteristics and mixing ratios. A high degree of consistency is found between numerical results from the developed MEM and experimental tests with different gas-phase pressures and liquid flow rates. The droplet diameter and velocity distribution are reviewed based on various Weber numbers, sources of energy, and momentum. Turbulence modeling assists to estimate the breakup length and time scale precisely in the developed MEM, and distribution ranges with mean values are achieved. With reference to a strong correlation between upstream turbulence flow and the developed MEM verified by experimental tests, an ideal droplet size and velocity distribution prediction is observed.
基金Supported by the National Natural Science Foundation of China
文摘A passive and multi-channel microwave sounder onboard the Chang＇e-2 orbiter has successfully acquired microwave observations of the lunar surface and subsurface structure. Compared with the Chang＇e-1 orbiter, the Chang＇e-2 orbiter obtained more accurate and comprehensive microwave brightness temperature data, which are helpful for further research. Since there is a close relationship between mi- crowave brightness temperature data and some related properties of the lunar regolith, such as the thickness, temperature and dielectric constant, precise and high resolution brightness temperature data are necessary for such research. However, through the detection mechanism of the microwave sounder, the brightness temperature data ac- quired from the microwave sounder are weighted by the antenna radiation pattern, so the data are the convolution of the antenna radiation pattern with the lunar brightness temperature. In order to obtain the real lunar brightness temperature, a deconvolution method is needed. The aim of this paper is to solve the problem associated with per- forming deconvolution of the lunar brightness temperature. In this study, we introduce the maximum entropy method （MEM） to process the brightness temperature data and achieve excellent results. The paper mainly includes the following aspects： first, we introduce the principle of the MEM; second, through a series of simulations, the MEM has been verified as an efficient deconvolution method; and third, the MEM is used to process the Chang＇e-2 microwave data and the results are significant.
文摘Excellent results are obtained in structure analysis with jew phases of structure factors by the maximum-entropy method (MEM) for CaGaN PbCO3 and ReBe22 single crystals. The computation time and memory space are minimized by symmetry operations so that structure analysis by the MEM can be carried out with a personal computer.
基金funded by the State Grid Jilin Economic Research Institute’s 2022 Practical Re-Search Project on the Construction of Long-Term Power Supply Guarantee Mechanism in Provincial Capital Cities under the New Situation,Grant Number SGJLJY00GPJS2200041.
文摘This paper addresses the problem of complex and challenging disturbance localization in the current power system operation environment by proposing a disturbance localization method for power systems based on group sparse representation and entropy weight method.Three different electrical quantities are selected as observations in the compressed sensing algorithm.The entropy weighting method is employed to calculate the weights of different observations based on their relative disturbance levels.Subsequently,by leveraging the topological information of the power system and pre-designing an overcomplete dictionary of disturbances based on the corresponding system parameter variations caused by disturbances,an improved Joint Generalized Orthogonal Matching Pursuit(J-GOMP)algorithm is utilized for reconstruction.The reconstructed sparse vectors are divided into three parts.If at least two parts have consistent node identifiers,the node is identified as the disturbance node.If the node identifiers in all three parts are inconsistent,further analysis is conducted considering the weights to determine the disturbance node.Simulation results based on the IEEE 39-bus system model demonstrate that the proposed method,utilizing electrical quantity information from only 8 measurement points,effectively locates disturbance positions and is applicable to various disturbance types with strong noise resistance.
文摘A method which is especially suitable for microcomputer calculation of the true orientation distribution function (ODF) according to the maximum-entropy estimate is proposed for hexagonal system polycrystalline materials with physical symmetry.The resultant computational software system has been also designed and first carried out in a microcomputer PANAFACOM-U1200 being on line with the X-ray diffractometer D/max-3A.The simu- lated calculation shows that the method is concisely pragmatic and easily popularized,while the results obtained are trust worthy.
文摘Iteration methods and their convergences of the maximum likelihoodestimator are discussed in this paper.We study Gauss-Newton method and give a set ofsufficient conditions for the convergence of asymptotic numerical stability.The modifiedGauss-Newton method is also studied and the sufficient conditions of the convergence arepresented.Two numerical examples are given to illustrate our results.
文摘It is important to know the maximum solid solubility( C max ) of various transition metals in a metal when one designs multi component alloys. There have been several semi empirical approaches to qualitatively predict the C max , such as Darken Gurry(D G) theorem, Miedema Chelikowsky(M C) theorem, electron concentration rule and the bond parameter rule. However, they are not particularly valid for the prediction of C max . It was developed on the basis of energetics of alloys as a new method to predict C max of different transition metals in metal Ti, which can be described as a semi empirical equation using the atomic parameters, i e, electronegativity difference, atomic diameter and electron concentration. It shows that the present method can be used to explain and deduce D G theorem, M C theorem and electron concentration rule.
文摘In this paper, survival data analysis is realized by applying Generalized Entropy Optimization Methods (GEOM). It is known that all statistical distributions can be obtained as distribution by choosing corresponding moment functions. However, Generalized Entropy Optimization Distributions (GEOD) in the form of distributions which are obtained on basis of Shannon measure and supplementary optimization with respect to characterizing moment functions, more exactly represent the given statistical data. For this reason, survival data analysis by GEOD acquires a new significance. In this research, the data of the life table for engine failure data (1980) is examined. The performances of GEOD are established by Chi-Square criteria, Root Mean Square Error (RMSE) criteria and Shannon entropy measure, Kullback-Leibler measure. Comparison of GEOD with each other in the different senses shows that along of these distributions (MinMaxEnt)4 is better in the senses of Shannon measure and of Kullback-Leibler measure. It is showed that, (MinMaxEnt)3 ((MaxMaxEnt)4) is more suitable for statistical data among (MinMaxEnt)m,m=1,2,3,4(MaxMaxEnt)m,m=1,2,3,4. Moreover, (MinMaxEnt)3 is better for statistical data than (MaxMaxEnt)4 in the sense of RMSE criteria. According to obtained distribution (MinMaxEnt)3 (MaxMaxEnt)4 estimator of Probability Density Function?f^?(t), Cumulative Distribution Functio?F^ (t) , Survival Function Ŝ(t) and Hazard Rate ĥ(t) are evaluated and graphically illustrated. The results are acquired by using statistical software MATLAB.
基金This research was financially supported by the National Natural Science Foundation of China(Grant No.50479028)a Research Fundfor Doctoral Programs of Higher Education of China(Grant No.20060423009)
文摘Based on the maximunl-entropy （ME） principle, a new power spectral estimator for random waves is derived in the form of S（ω）=a/8H^2^-（2π）^（d＋2）exp[-b（2π/ω）^n],1）y solving a variational problem subject to some quite general constraints. This robust method is comprehensive enough to describe the wave spectra even in extreme wave conditions and is superior to periodogranl method that is not suit＇able to process comparatively short or intensively unsteady signals for its tremendous boundary effect and some inherent defects of FKF. Fortunately, the newly derived method for spectral estimation works fairly well, even though the sample data sets are very short and unsteady, and the reliability and efficiency of this spectral estimator have been preliminarily proved.
文摘The Maximum-entropy Method(MEM)for determining the complete ODF(orientation distribution function),accompanied with the equal-volume partitioning technique for quantitative texture analysis,was first tested in analysing the texture of a commercial purity titanium strip.The experimentally measured results indi- cate that the rolling planes of most grains in this sample are parallel to the{1010}and the{1210}with about ~±10°spread while the rolling directions nearly distribute uniformly and their volume fractions are 19.46％ and 18.70％ respectively.Besides,there are still two weaker texture components,(7526)[1544]and (1105)[2311],with 3.24％and 4.17％respectively.
基金Supported by Jiangsu Agricultural Science and Technology Innovation Fund(CX(12)5035)Jiangsu Agricultural "Three New Engineering" Project(SXGC[2014]299)~~
文摘[Objective] The aim was to propose a new entropy weight fuzzy compre- hensive evaluation method for assessing cotton salt tolerance, realizing the objective, accurate and comprehensive evaluation of salt tolerance of cotton. [Method] A sand culture experiment under salt stress of 150 mmol/L of NaCI was designed. The in- dicator weight was determined with the entropy weight fuzzy comprehensive evalu- ation method, based on the salt injury index of indicators. The salt tolerance of cotton was evaluated comprehensively. [Result] At the germination stage, the entropy and weight of salt injury index of germination energy, vigor index, hypocotyl length and fresh weight were highest, followed by germination rate and germination index, and of root length were lowest. At the seedling stage, the entropy and weight of salt injury index of plasma membrane permeability, root vigor and leaf expansion rate were highest, followed by plant height and net photosynthetic rate, and of shoot dry weight and root dry weight were lowest. The salt tolerance of cotton differed a- mong growth stages and cultivars. Among the 11 cultivars, CCRI-44 and CCRI-75 were steadily salt-tolerant at both germination and seedling stages; CCRI-17, Sumi- an 22, Sumian 15 and Dexiamianl had a stable moderate salt tolerance; while Sumian 12 and Simian 3 were steadily salt-sensitive. [Conclusion] The evaluated result was objective and exact, which indicated that this method could be used in comprehensive evaluation of salt tolerance of cotton.
文摘Two dimensional(2 D) entropy method has to pay the price of time when applied to image segmentation. So the genetic algorithm is introduced to improve the computational efficiency of the 2 D entropy method. The proposed method uses both the gray value of a pixel and the local average gray value of an image. At the same time, the simple genetic algorithm is improved by using better reproduction and crossover operators. Thus the proposed method makes up the 2 D entropy method’s drawback of being time consuming, and yields satisfactory segmentation results. Experimental results show that the proposed method can save computational time when it provides good quality segmentation.
基金Supported by the Major Project of Application Foundation and Advanced Technology of Tianjin (the Natural Science Foundation of Tianjin) (09JCZDJC19200),China~~
文摘[Objective] This study was to provide references for the evaluation of water quality in aquaculture ponds by evaluating the pond water quality using fuzzy comprehensive evaluation method based on entropy weight. [Method] The fuzzy compre- hensive evaluation method based on entropy weight was used to evaluate the water quality in the ponds with Ukraine scale carp （Cyprinus carpio） as the main cultivated fish. The average size of the fish was 71.4 g/ind, and totally three groups of pond were set with the population density of 6 000, 9 000, 12 000 ind/hm2. [Result] According to the GB3838-2002 Environmental Quality Standards for Surface Water of China, the water quality of 6 000 ind/hm2 group was Grade I, and the water quality of 9 000 and 12 000 ind/hm2 were Grade V. [Conclusion] With the increasing of feeding density, the pond water quality would worsen, however, there is no difference on water quality between 9 000 and 12 000 ind/hm2 groups.
