In complex geological environments,the analysis of drill cores to determine rock strength can be challenging due to the wide variability in the degree of fracturing,leading to subjectivity in the collection of represe...In complex geological environments,the analysis of drill cores to determine rock strength can be challenging due to the wide variability in the degree of fracturing,leading to subjectivity in the collection of representative samples for uniaxial compressive strength testing.This study evaluates non-destructive techniques on calcareous rocks with different tectonic deformations,including Equotip hardness,ultrasound P-wave velocity,thin section analysis,and calcimetry,integrated with photogrammetric fracture analysis.The investigated carbonate rock samples are sourced from drill cores derived from the Umbria-Marche fold and thrust belt(northern Apennines,Italy),including a gently dipping limb of an anticline,a hinge zone of an anticline,and a fault zone associated with a thrust.Fracture intensity,quantified by the P21 parameter using photogrammetric techniques on pre-loading rock samples,is assessed alongside macroscopic identification of discontinuities(such as stylolites,veins,and joints)using marker colours to monitor failures during uniaxial compression testing.Empirical correlations depicted by single and multi-linear relationships indicate a strong dependence between the mechanical and physical properties of limestones.Both Equotip and P-wave velocity are influenced by fracture intensity,but P-wave velocity varies significantly with discontinuity orientation,especially at 45°-90°.To refine uniaxial compressive strength predictions and mitigate multicollinearity,statistical approaches,including linear and multilinear regression,Principal Component Analysis and Gaussian Process Regression,were tested.Findings improve the reliability of non-destructive techniques for assessing rock strength in structurally complex settings,with implications for geotechnical applications.展开更多
This study investigated the heterogeneous responses of organic matter(OM)in highly-to over-mature source rocks during thermal maturation.An integrated analysis was conducted on the Raman spectroscopic and geochemical ...This study investigated the heterogeneous responses of organic matter(OM)in highly-to over-mature source rocks during thermal maturation.An integrated analysis was conducted on the Raman spectroscopic and geochemical signatures of shales from the Lower Silurian Longmaxi Formation and the Lower Cambrian Qiongzhusi Formation,as well as anthracites from the Lower Permian Shanxi–Formation and the Upper Carboniferous Taiyuan Formation(collectively referred to as the Shanxi Taiyuan Formations).Additionally,burial and thermal evolution modeling was employed to support the analysis.A systematic assessment of Raman spectral parameters(e.g.,the positions and intensity ratio of the D and G bands)revealed robust correlations between the thermal history patterns of source rocks and molecular structural evolution parameters.The subsequent mechanistic quantification demonstrated that the maturation state of the source rocks was subjected to the hierarchical control of three principal factors:Peak heating temperature,the duration of sustained thermal intensity,and effective maturation duration.In addition,comparative analyses demonstrated that the anthracites attained higher structural ordering under sustained thermal conditions.This contrasts with the disordered carbon matrices observed in the intermittently heated shales.Raman spectroscopy further revealed broader variations in the D and G band intensities of the Longmaxi Formation compared to the Qiongzhusi Formation.This difference is associated with their different thermal histories.The thermal burial histories confirm that shales in the Longmaxi Formation underwent thermal exposure at lower peak temperatures over a shorter duration compared to those in the Qiongzhusi Formation.Finally,this study established a maturity calibration model for over-mature source rocks through a systematic correlation between Raman peak height ratios(R_(D/G))and vitrinite reflectance(R_(o)).展开更多
In the field of rock engineering,the influence of water is a dynamic process that exhibits varying effects over time and across different locations.To further understand how water influences the mechanical properties ...In the field of rock engineering,the influence of water is a dynamic process that exhibits varying effects over time and across different locations.To further understand how water influences the mechanical properties and acoustic emission(AE)behavior of rocks,this study conducted uniaxial compression experiments on sandstones with varying degrees of wetting under both natural conditions and water-chemical environments.In addition,the study combined AE equipment with digital image correlation(DIC)to monitor the entire failure process.Using the sliding window algorithm,the variation in the variance of AE characteristic parameters during the process of sandstone loading to failure is analyzed from the perspective of critical slowing down.This analysis enables the effective identification of the early warning signal before failure.The experimental findings suggest that an increase in wetting height results in a gradual decrease in peak stress,accompanied by a concomitant increase in the percentage of shear cracks.The characteristic parameters,including energy,amplitude,and ringing count,all exhibit critical slowing phenomena.The waveform of AE characteristic parameters of the same sample is similar,and the mutation time of the precursor signal is roughly the same.All signals appear in the irreversible plastic deformation stage of microcrack initiation.The integration of critical slowing down theory and the b-value early warning method facilitates a more comprehensive evaluation of the stability of rock mass,thereby significantly enhancing the efficiency and safety of disaster prevention measures.展开更多
1.Objective The Songliao Basin(SB)is situated on the eastern margin of Eurasia continent(Northeast Asia).During the Late Jurassic to Early Cretaceous,hundreds of rifting basins developed in this area,and the SB is a u...1.Objective The Songliao Basin(SB)is situated on the eastern margin of Eurasia continent(Northeast Asia).During the Late Jurassic to Early Cretaceous,hundreds of rifting basins developed in this area,and the SB is a unique case among them as it evolved into the largest rift basin.The rift basin filling of SB includes Huoshiling Formation,Shahezi Formation,and Yingcheng Formation in ascending order.The mega-rifting was controlled by the Mongol-Okhotsk Collisional Belt to the north and northwest and the Pacific Subduction Zone to the east(Wang PJ et al.,2016).As the first rifting succession,the Huoshiling Formation contains key information about the formation of the rifting basins and records the evolution of the Mongol-Okhotsk Collisional Belt and the Pacific Subduction Zone.However,the geological period of the Huoshiling Formation has not been well constrained for two main reasons.First,it is easily confused with the Yingcheng Formation,as both are dominated by volcanogenic-sedimentary successions.Second,there is lack of reliable dating samples from the uppermost part of the Huoshiling Formation due to its considerable burial depth.展开更多
The links between the adakitic rocks and Cu-Au mineralization have long been argued.This study investigates petrogenesis and its link to mineralization potential by a series of in-situ geochronological and geochemical...The links between the adakitic rocks and Cu-Au mineralization have long been argued.This study investigates petrogenesis and its link to mineralization potential by a series of in-situ geochronological and geochemical signatures of apatite and zircon in three ore-related intrusions and one-barren intrusion in the Middle-Lower Yangtze River Metallogenic Belt(MLYRB).Zircon U-Pb dating yield ages of 139–143 Ma and 121 Ma for the ore-related and ore-barren intrusions,respectively.The ore-related rocks have higher apatite Sr/Y(1.57–9.69),(La/Yb)_(N)(16.7–159.5),andδEu(0.45–0.74)than the ore-barren rocks of 0.57–1.02,19.3–24.1 and 0.40–0.45,respectively,indicating the former has an adakitic affinity,while the latter has a non-adakitic affinity.The ore-related rocks have enriched zircon Hf isotopes withε_(Hf)(t)values of-15.9 to-5.5 and T_(DMC)ages of 2408–1655 Ma and apatite Sr-Nd isotopes,indicating that the ore-related magmas were mainly originated from partial melting of subducted oceanic crust.The orebarren rocks have higherε_(Hf)(t)values of-6.6 to-4.6 and lower T_(DMC)ages of 1598–1469 Ma and apatite Sr-Nd isotopes,indicating a lithospheric mantle source.The ore-related rocks have higher oxygen fugacity of mean∆FMQ+2.00 and X_(F)/X_(OH)of 8.36–175 than the ore-barren rocks of mean∆FMQ+1.43 and3.72–4.96.It was inferred that magma source,water content,and oxygen fugacity emerge as critical factors governing the regional Cu-Au mineralization potential.展开更多
椎间盘由髓核、纤维环和软骨终板组成,对维持脊柱正常生理功能至关重要。椎间盘退变(intervertebral disc degeneration,IDD)是导致腰背痛等脊柱退行性疾病的主要病理基础,给人们的健康状况造成极大的困扰。然而目前对IDD的分子机制仍...椎间盘由髓核、纤维环和软骨终板组成,对维持脊柱正常生理功能至关重要。椎间盘退变(intervertebral disc degeneration,IDD)是导致腰背痛等脊柱退行性疾病的主要病理基础,给人们的健康状况造成极大的困扰。然而目前对IDD的分子机制仍然缺乏清晰的了解,导致缺乏有效的靶向干预措施。RAS同源家族成员A(RAS homolog family member A,RhoA)/Rho相关蛋白激酶(Rho-associated protein kinase,ROCK)信号通路是调节细胞收缩、迁移和生长的经典通路。其被激活后可参与调控细胞骨架重塑、细胞外基质代谢、生物钟节律、细胞表型改变、细胞衰老及死亡等环节,进而影响IDD的病理进程。深入探究RhoA/ROCK信号通路在IDD中的作用,不仅能揭示疾病发生的分子生物学机制,也有望为研发靶向该通路的治疗策略提供理论依据。展开更多
Backfill is often employed in mining operations for ground support,with its positive impact on ground stability acknowledged in many underground mines.However,existing studies have predominantly focused only on the st...Backfill is often employed in mining operations for ground support,with its positive impact on ground stability acknowledged in many underground mines.However,existing studies have predominantly focused only on the stress development within the backfill material,leaving the influence of stope backfilling on stress distribution in surrounding rock mass and ground stability largely unexplored.Therefore,this paper presents numerical models in FLAC3D to investigate,for the first time,the time-dependent stress redistribution around a vertical backfilled stope and its implications on ground stability,considering the creep of surrounding rock mass.Using the Soft Soil constitutive model,the compressibility of backfill under large pressure was captured.It is found that the creep deformation of rock mass exercises compression on backfill and results in a less void ratio and increased modulus for fill material.The compacted backfill conversely influenced the stress distribution and ground stability of rock mass which was a combined effect of wall creep and compressibility of backfill.With the increase of time or/and creep deformation,the minimum principal stress in the rocks surrounding the backfilled stope increased towards the pre-mining stress state,while the deviatoric stress reduces leading to an increased factor of safety and improved ground stability.This improvement effect of backfill on ground stability increased with the increase of mine depth and stope height,while it is also more pronounced for the narrow stope,the backfill with a smaller compression index,and the soft rocks with a smaller viscosity coefficient.Furthermore,the results emphasize the importance of minimizing empty time and backfilling extracted stope as soon as possible for ground control.Reduction of filling gap height enhances the local stability around the roof of stope.展开更多
The Early Cambrian Yuertusi Formation(Є_(1)y)in the Tarim Basin of China deposits a continuously developed suite of organic-rich black mudstones,which constitute an important source of oil and gas reservoirs in the Pa...The Early Cambrian Yuertusi Formation(Є_(1)y)in the Tarim Basin of China deposits a continuously developed suite of organic-rich black mudstones,which constitute an important source of oil and gas reservoirs in the Paleozoic.However,its hydrocarbon generation and evolution characteristics and resource potential have long been constrained by deeply buried strata and previous research.In this paper,based on the newly obtained ultra-deep well drilling data,the hydrocarbon generation and expulsion model ofЄ_(1)y shale was established by using data-driven Monte Carlo simulation,upon which the hydrocarbon generation,expulsion,and retention amounts were calculated by using the diagenetic method.The research indicates that theЄ_(1)y shale reaches the hydrocarbon generation and expulsion threshold at equivalent vitrinite reflectances of 0.46%and 0.72%,respectively.The cumulative hydrocarbon generation is 68.88×10^(10)t,the cumulative hydrocarbon expulsion is 35.59×10^(10)t,and the cumulative residual hydrocarbon is 33.29×10^(10)t.This paper systematically and quantitatively calculates the hydrocarbon expulsion at various key geological periods for theЄ_(1)y source rocks in the study area for the first time,more precisely confirming that the black shale of theЄ_(1)y is the most significant source rock contributing to the marine oil and gas resources in the Tarim Basin,filling the gap in hydrocarbon expulsion calculation in the study area,and providing an important basis for the formation and distribution of Paleozoic hydrocarbon reservoirs.The prospect of deep ultra-deep oil and gas exploration in the Tarim Basin is promising.Especially,the large area of dolomite reservoirs under the Cambrian salt and source rock interiors are the key breakthrough targets for the next exploration in the Tarim Basin.展开更多
Significant exploration progress has been made in ultra-deep clastic rocks in the Kuqa Depression,Tarim Basin,over recent years.A new round of comprehensive geological research has formed four new understandings:(1)Es...Significant exploration progress has been made in ultra-deep clastic rocks in the Kuqa Depression,Tarim Basin,over recent years.A new round of comprehensive geological research has formed four new understandings:(1)Establish structural model consisting of multi-detachment composite,multi-stage structural superposition and multi-layer deformation.Multi-stage structural traps are overlapped vertically,and a series of structural traps are discovered in underlying ultra-deep layers.(2)Five sets of high-quality large-scale source rocks of three types of organic phases are developed in the Triassic and Jurassic systems,and forming a good combination of source-reservoir-cap rocks in ultra-deep layers with three sets of large-scale regional reservoir and cap rocks.(3)The formation of large oil and gas fields is controlled by four factors which are source,reservoir,cap rocks and fault.Based on the spatial configuration relationship of these four factors,a new three-dimensional reservoir formation model for ultra-deep clastic rocks in the Kuqa Depression has been established.(4)The next key exploration fields for ultra-deep clastic rocks in the Kuqa Depression include conventional and unconventional oil and gas.The conventional oil and gas fields include the deep multi-layer oil-gas accumulation zone in Kelasu,tight sandstone gas of Jurassic Ahe Formation in the northern structural zone,multi-target layer lithological oil and gas reservoirs in Zhongqiu–Dina structural zone,lithologic-stratigraphic and buried hill composite reservoirs in south slope and other favorable areas.Unconventional oil and gas fields include deep coal rock gas of Jurassic Kezilenuer and Yangxia formations,Triassic Tariqike Formation and Middle-Lower Jurassic and Upper Triassic continental shale gas.The achievements have important reference significance for enriching the theory of ultra-deep clastic rock oil and gas exploration and guiding the future oil and gas exploration deployment.展开更多
The North China Craton(NCC)experienced significant lithospheric thinning of over 100 km during the Mesozoic,accompanied by extensive magmatic activity and extensional tectonics.However,the timing and mechanism of this...The North China Craton(NCC)experienced significant lithospheric thinning of over 100 km during the Mesozoic,accompanied by extensive magmatic activity and extensional tectonics.However,the timing and mechanism of this thinning remain the subjects of debate.This study presents zircon U-Pb ages,Hf isotopic data and whole-rock elemental and Sr-Nd isotopic compositions of the Guanshui monzonites and diorites in the eastern NCC.Zircon U-Pb dating reveals that both rock types formed at ca.130 Ma.The monzonites,characterized by high Mg^(#)(50.9-57.9),low Nb/U ratios(2.53-3.89)and depleted isotopic compositions,suggest derivation from asthenospheric mantle modified by slab-derived fluids.The diorites,distinguished by low SiO_(2)(49.5-50.8),high Mg^(#)(66.7-68.5)and an EM2-type enriched mantle isotopic signature,point to a lithospheric mantle source modified by subducted sediment melts.The coexistence of monzonites and diorites suggests a transition in magma source from lithospheric to asthenospheric mantle,implying that lithospheric thinning may have commenced around 130 Ma.The destruction of the NCC was likely driven by localized,small-scale drip-style detachment processes,rather than wholesale lithospheric removal.展开更多
Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interfa...Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.展开更多
It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and ...It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.展开更多
The fatigue fracture under cyclic dynamic direct tensions of brittle rock is an important mechanical characteristic index for the evaluation of geological disasters and underground engineering safety.However,most stud...The fatigue fracture under cyclic dynamic direct tensions of brittle rock is an important mechanical characteristic index for the evaluation of geological disasters and underground engineering safety.However,most studies focus on macroscopic fracture mechanical properties,and the mechanism linking the macroscopic fracture with the microcrack growth during the cyclic dynamic direct tensile loading of brittle rocks is rarely studied.In this paper,a micro-macro fracture model explaining the stress-strain constitutive relationship is established at the last impact failure after being subjected to multiple cyclic direct tensile impacts of brittle rocks.This model is based on the wing crack extension model under direct tensile loading,the quasi-static and dynamic fracture toughness relationship,the suggested crack rate and strain rate relationship,the relationship of damage and dynamic tensile fatigue life N,the relationship of dynamic fracture toughness and dynamic tensile fatigue life N.The variations of dynamic mechanical properties of rocks with dynamic tensile fatigue life for different initial crack sizes and angles within the rocks are further discussed.The compressive strength,elastic modulus,crack initiation stress,limit crack extension length and crack extension rate descend and the failure strain ascends with an increment of dynamic tensile fatigue life in rocks.This study's results provide help for the safety and stability of the underground surrounding rocks under blasting working or seismic disasters.展开更多
Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout a...Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.展开更多
Based on the finite-discrete element method,a three-dimensional numerical model for axial impact rock breaking was established and validated.A computational method for energy conversion during impact rock breaking was...Based on the finite-discrete element method,a three-dimensional numerical model for axial impact rock breaking was established and validated.A computational method for energy conversion during impact rock breaking was proposed,and the effects of conical tooth forward rake angle,rock temperature,and impact velocity on rock breaking characteristics and energy transfer laws were analyzed.The results show that during single impact rock breaking with conical tooth bits,merely 7.52%to 12.51%of the energy is utilized for rock breaking,while a significant 57.26%to 78.10%is dissipated as frictional loss.An insufficient forward rake angle increases tooth penetration depth and frictional loss,whereas an excessive forward rake angle reduces penetration capability,causing bit rebound and greater energy absorption by the drill rod.Thus,an optimal forward rake angle exists.Regarding environmental factors,high temperatures significantly enhance impact-induced rock breaking.Thermal damage from high temperatures reduces rock strength and inhibits its energy absorption.Finally,higher impact velocities intensify rock damage,yet excessively high velocities increase frictional loss and reduce the proportion of energy absorbed by the rock,thereby failing to substantially improve rock breaking efficiency.An optimal impact velocity exists.展开更多
Hydrogen,a genuinely clean energy,is a promising alternative to fossil fuels.Inspired by underground gas storage of methane,establishing underground hydrogen storage(UHS)in depleted oil and gas reservoirs has emerged ...Hydrogen,a genuinely clean energy,is a promising alternative to fossil fuels.Inspired by underground gas storage of methane,establishing underground hydrogen storage(UHS)in depleted oil and gas reservoirs has emerged as a significant research focus.Carbonate reservoirs,where widely-presented fractures can facilitate the high-speed injection and production of gases,are hence ideal candidates for building underground hydrogen storage facilities.During the cyclic injection and extraction processes of UHS,the formation is subjected to stress disturbances,leading to stress sensitivity.Understanding the stress sensitivity patterns of carbonate rocks is crucial for optimizing injection and production strategies.This study reconstructed three-dimensional digital models of fractured carbonate rocks from the L gas field using micro-CT scanning technology.Utilizing the finite element method,we investigated the microscopic permeability characteristics of carbonate rocks and analyzed the impact of stress loading direction and confining stress on stress sensitivity.The findings reveal that the stress loading direction significantly influences the stress sensitivity of fractured carbonate rocks.When a stress of 60 MPa is applied perpendicular to the fracture direction,the permeability reduction ratio can reach 17.32%.In contrast,when the same stress is applied parallel to the fracture direction,the permeability reduction ratio is only 4.82%.Furthermore,a simulation of UHS with cyclic injection and production of H2 in the target block was conducted.When both permeability and porosity stress sensitivity were considered,the working gas volume for UHS decreased by only 3.4%,demonstrating that fractured carbonate reservoirs are feasible candidates for constructing underground hydrogen storage.展开更多
文摘In complex geological environments,the analysis of drill cores to determine rock strength can be challenging due to the wide variability in the degree of fracturing,leading to subjectivity in the collection of representative samples for uniaxial compressive strength testing.This study evaluates non-destructive techniques on calcareous rocks with different tectonic deformations,including Equotip hardness,ultrasound P-wave velocity,thin section analysis,and calcimetry,integrated with photogrammetric fracture analysis.The investigated carbonate rock samples are sourced from drill cores derived from the Umbria-Marche fold and thrust belt(northern Apennines,Italy),including a gently dipping limb of an anticline,a hinge zone of an anticline,and a fault zone associated with a thrust.Fracture intensity,quantified by the P21 parameter using photogrammetric techniques on pre-loading rock samples,is assessed alongside macroscopic identification of discontinuities(such as stylolites,veins,and joints)using marker colours to monitor failures during uniaxial compression testing.Empirical correlations depicted by single and multi-linear relationships indicate a strong dependence between the mechanical and physical properties of limestones.Both Equotip and P-wave velocity are influenced by fracture intensity,but P-wave velocity varies significantly with discontinuity orientation,especially at 45°-90°.To refine uniaxial compressive strength predictions and mitigate multicollinearity,statistical approaches,including linear and multilinear regression,Principal Component Analysis and Gaussian Process Regression,were tested.Findings improve the reliability of non-destructive techniques for assessing rock strength in structurally complex settings,with implications for geotechnical applications.
基金supported by the National Natural Science Foundation of China(42362022)the Open Fund of the Shaanxi Key Laboratory of Petroleum Accumulation Geology(PAG-202406)the Open Fund of the Mine Geology and Environment Academician and Expert Workstation(2024OITYSZJGZZ-005)。
文摘This study investigated the heterogeneous responses of organic matter(OM)in highly-to over-mature source rocks during thermal maturation.An integrated analysis was conducted on the Raman spectroscopic and geochemical signatures of shales from the Lower Silurian Longmaxi Formation and the Lower Cambrian Qiongzhusi Formation,as well as anthracites from the Lower Permian Shanxi–Formation and the Upper Carboniferous Taiyuan Formation(collectively referred to as the Shanxi Taiyuan Formations).Additionally,burial and thermal evolution modeling was employed to support the analysis.A systematic assessment of Raman spectral parameters(e.g.,the positions and intensity ratio of the D and G bands)revealed robust correlations between the thermal history patterns of source rocks and molecular structural evolution parameters.The subsequent mechanistic quantification demonstrated that the maturation state of the source rocks was subjected to the hierarchical control of three principal factors:Peak heating temperature,the duration of sustained thermal intensity,and effective maturation duration.In addition,comparative analyses demonstrated that the anthracites attained higher structural ordering under sustained thermal conditions.This contrasts with the disordered carbon matrices observed in the intermittently heated shales.Raman spectroscopy further revealed broader variations in the D and G band intensities of the Longmaxi Formation compared to the Qiongzhusi Formation.This difference is associated with their different thermal histories.The thermal burial histories confirm that shales in the Longmaxi Formation underwent thermal exposure at lower peak temperatures over a shorter duration compared to those in the Qiongzhusi Formation.Finally,this study established a maturity calibration model for over-mature source rocks through a systematic correlation between Raman peak height ratios(R_(D/G))and vitrinite reflectance(R_(o)).
基金support from the National Natural Science Foundation of China(Grant Nos.52104207 and 52374214)the Shandong Provincial Youth Innovation Team Development Program for Higher Education Institutions(Grant No.2023KJ305).
文摘In the field of rock engineering,the influence of water is a dynamic process that exhibits varying effects over time and across different locations.To further understand how water influences the mechanical properties and acoustic emission(AE)behavior of rocks,this study conducted uniaxial compression experiments on sandstones with varying degrees of wetting under both natural conditions and water-chemical environments.In addition,the study combined AE equipment with digital image correlation(DIC)to monitor the entire failure process.Using the sliding window algorithm,the variation in the variance of AE characteristic parameters during the process of sandstone loading to failure is analyzed from the perspective of critical slowing down.This analysis enables the effective identification of the early warning signal before failure.The experimental findings suggest that an increase in wetting height results in a gradual decrease in peak stress,accompanied by a concomitant increase in the percentage of shear cracks.The characteristic parameters,including energy,amplitude,and ringing count,all exhibit critical slowing phenomena.The waveform of AE characteristic parameters of the same sample is similar,and the mutation time of the precursor signal is roughly the same.All signals appear in the irreversible plastic deformation stage of microcrack initiation.The integration of critical slowing down theory and the b-value early warning method facilitates a more comprehensive evaluation of the stability of rock mass,thereby significantly enhancing the efficiency and safety of disaster prevention measures.
基金supported by the National Natural Science Foundation of China(42102135,42072140,42202122 and 41790453)Science and Technology Research Program of Chongqing Municipal Education Commission(KJZD-M202101502,KJQN202201549 and KJQN202101535)+1 种基金Natural Science Foundation of Chongqing(CSTB2022NSCQ-JQX0031 and CSTB2022NSCQMSX1586)China Scholarship Council(202208505055)。
文摘1.Objective The Songliao Basin(SB)is situated on the eastern margin of Eurasia continent(Northeast Asia).During the Late Jurassic to Early Cretaceous,hundreds of rifting basins developed in this area,and the SB is a unique case among them as it evolved into the largest rift basin.The rift basin filling of SB includes Huoshiling Formation,Shahezi Formation,and Yingcheng Formation in ascending order.The mega-rifting was controlled by the Mongol-Okhotsk Collisional Belt to the north and northwest and the Pacific Subduction Zone to the east(Wang PJ et al.,2016).As the first rifting succession,the Huoshiling Formation contains key information about the formation of the rifting basins and records the evolution of the Mongol-Okhotsk Collisional Belt and the Pacific Subduction Zone.However,the geological period of the Huoshiling Formation has not been well constrained for two main reasons.First,it is easily confused with the Yingcheng Formation,as both are dominated by volcanogenic-sedimentary successions.Second,there is lack of reliable dating samples from the uppermost part of the Huoshiling Formation due to its considerable burial depth.
基金supported by the National Natural Science Foundation of China(42472117)the China Geological Survey Project(DD20230040)+1 种基金the Natural Science Foundation of Anhui Province(2108085MD133)the PI Project of Southern Marine Science and Engineering Guangdong Laboratory(Guangzhou)(GML2020GD0802)。
文摘The links between the adakitic rocks and Cu-Au mineralization have long been argued.This study investigates petrogenesis and its link to mineralization potential by a series of in-situ geochronological and geochemical signatures of apatite and zircon in three ore-related intrusions and one-barren intrusion in the Middle-Lower Yangtze River Metallogenic Belt(MLYRB).Zircon U-Pb dating yield ages of 139–143 Ma and 121 Ma for the ore-related and ore-barren intrusions,respectively.The ore-related rocks have higher apatite Sr/Y(1.57–9.69),(La/Yb)_(N)(16.7–159.5),andδEu(0.45–0.74)than the ore-barren rocks of 0.57–1.02,19.3–24.1 and 0.40–0.45,respectively,indicating the former has an adakitic affinity,while the latter has a non-adakitic affinity.The ore-related rocks have enriched zircon Hf isotopes withε_(Hf)(t)values of-15.9 to-5.5 and T_(DMC)ages of 2408–1655 Ma and apatite Sr-Nd isotopes,indicating that the ore-related magmas were mainly originated from partial melting of subducted oceanic crust.The orebarren rocks have higherε_(Hf)(t)values of-6.6 to-4.6 and lower T_(DMC)ages of 1598–1469 Ma and apatite Sr-Nd isotopes,indicating a lithospheric mantle source.The ore-related rocks have higher oxygen fugacity of mean∆FMQ+2.00 and X_(F)/X_(OH)of 8.36–175 than the ore-barren rocks of mean∆FMQ+1.43 and3.72–4.96.It was inferred that magma source,water content,and oxygen fugacity emerge as critical factors governing the regional Cu-Au mineralization potential.
文摘椎间盘由髓核、纤维环和软骨终板组成,对维持脊柱正常生理功能至关重要。椎间盘退变(intervertebral disc degeneration,IDD)是导致腰背痛等脊柱退行性疾病的主要病理基础,给人们的健康状况造成极大的困扰。然而目前对IDD的分子机制仍然缺乏清晰的了解,导致缺乏有效的靶向干预措施。RAS同源家族成员A(RAS homolog family member A,RhoA)/Rho相关蛋白激酶(Rho-associated protein kinase,ROCK)信号通路是调节细胞收缩、迁移和生长的经典通路。其被激活后可参与调控细胞骨架重塑、细胞外基质代谢、生物钟节律、细胞表型改变、细胞衰老及死亡等环节,进而影响IDD的病理进程。深入探究RhoA/ROCK信号通路在IDD中的作用,不仅能揭示疾病发生的分子生物学机制,也有望为研发靶向该通路的治疗策略提供理论依据。
基金the funding support from the National Natural Science Foundation of China(Grant Nos.52304101 and 52004206)the China Postdoctoral Science Foundation(Grant No.2023MD734215)。
文摘Backfill is often employed in mining operations for ground support,with its positive impact on ground stability acknowledged in many underground mines.However,existing studies have predominantly focused only on the stress development within the backfill material,leaving the influence of stope backfilling on stress distribution in surrounding rock mass and ground stability largely unexplored.Therefore,this paper presents numerical models in FLAC3D to investigate,for the first time,the time-dependent stress redistribution around a vertical backfilled stope and its implications on ground stability,considering the creep of surrounding rock mass.Using the Soft Soil constitutive model,the compressibility of backfill under large pressure was captured.It is found that the creep deformation of rock mass exercises compression on backfill and results in a less void ratio and increased modulus for fill material.The compacted backfill conversely influenced the stress distribution and ground stability of rock mass which was a combined effect of wall creep and compressibility of backfill.With the increase of time or/and creep deformation,the minimum principal stress in the rocks surrounding the backfilled stope increased towards the pre-mining stress state,while the deviatoric stress reduces leading to an increased factor of safety and improved ground stability.This improvement effect of backfill on ground stability increased with the increase of mine depth and stope height,while it is also more pronounced for the narrow stope,the backfill with a smaller compression index,and the soft rocks with a smaller viscosity coefficient.Furthermore,the results emphasize the importance of minimizing empty time and backfilling extracted stope as soon as possible for ground control.Reduction of filling gap height enhances the local stability around the roof of stope.
基金supported by the CNPC Science and Technology Major Project of the Fourteenth Five-Year Plan(2021DJ0101)the National Natural Science Foundation of China(U19B600302,41872148)。
文摘The Early Cambrian Yuertusi Formation(Є_(1)y)in the Tarim Basin of China deposits a continuously developed suite of organic-rich black mudstones,which constitute an important source of oil and gas reservoirs in the Paleozoic.However,its hydrocarbon generation and evolution characteristics and resource potential have long been constrained by deeply buried strata and previous research.In this paper,based on the newly obtained ultra-deep well drilling data,the hydrocarbon generation and expulsion model ofЄ_(1)y shale was established by using data-driven Monte Carlo simulation,upon which the hydrocarbon generation,expulsion,and retention amounts were calculated by using the diagenetic method.The research indicates that theЄ_(1)y shale reaches the hydrocarbon generation and expulsion threshold at equivalent vitrinite reflectances of 0.46%and 0.72%,respectively.The cumulative hydrocarbon generation is 68.88×10^(10)t,the cumulative hydrocarbon expulsion is 35.59×10^(10)t,and the cumulative residual hydrocarbon is 33.29×10^(10)t.This paper systematically and quantitatively calculates the hydrocarbon expulsion at various key geological periods for theЄ_(1)y source rocks in the study area for the first time,more precisely confirming that the black shale of theЄ_(1)y is the most significant source rock contributing to the marine oil and gas resources in the Tarim Basin,filling the gap in hydrocarbon expulsion calculation in the study area,and providing an important basis for the formation and distribution of Paleozoic hydrocarbon reservoirs.The prospect of deep ultra-deep oil and gas exploration in the Tarim Basin is promising.Especially,the large area of dolomite reservoirs under the Cambrian salt and source rock interiors are the key breakthrough targets for the next exploration in the Tarim Basin.
基金Supported by the National Natural Science Foundation of China(U22B6002)PetroChina Science and Technology Project(2023ZZ14).
文摘Significant exploration progress has been made in ultra-deep clastic rocks in the Kuqa Depression,Tarim Basin,over recent years.A new round of comprehensive geological research has formed four new understandings:(1)Establish structural model consisting of multi-detachment composite,multi-stage structural superposition and multi-layer deformation.Multi-stage structural traps are overlapped vertically,and a series of structural traps are discovered in underlying ultra-deep layers.(2)Five sets of high-quality large-scale source rocks of three types of organic phases are developed in the Triassic and Jurassic systems,and forming a good combination of source-reservoir-cap rocks in ultra-deep layers with three sets of large-scale regional reservoir and cap rocks.(3)The formation of large oil and gas fields is controlled by four factors which are source,reservoir,cap rocks and fault.Based on the spatial configuration relationship of these four factors,a new three-dimensional reservoir formation model for ultra-deep clastic rocks in the Kuqa Depression has been established.(4)The next key exploration fields for ultra-deep clastic rocks in the Kuqa Depression include conventional and unconventional oil and gas.The conventional oil and gas fields include the deep multi-layer oil-gas accumulation zone in Kelasu,tight sandstone gas of Jurassic Ahe Formation in the northern structural zone,multi-target layer lithological oil and gas reservoirs in Zhongqiu–Dina structural zone,lithologic-stratigraphic and buried hill composite reservoirs in south slope and other favorable areas.Unconventional oil and gas fields include deep coal rock gas of Jurassic Kezilenuer and Yangxia formations,Triassic Tariqike Formation and Middle-Lower Jurassic and Upper Triassic continental shale gas.The achievements have important reference significance for enriching the theory of ultra-deep clastic rock oil and gas exploration and guiding the future oil and gas exploration deployment.
基金supported by the Jiangsu Innovation and Entrepreneurship Project(JSSCBS20211225).
文摘The North China Craton(NCC)experienced significant lithospheric thinning of over 100 km during the Mesozoic,accompanied by extensive magmatic activity and extensional tectonics.However,the timing and mechanism of this thinning remain the subjects of debate.This study presents zircon U-Pb ages,Hf isotopic data and whole-rock elemental and Sr-Nd isotopic compositions of the Guanshui monzonites and diorites in the eastern NCC.Zircon U-Pb dating reveals that both rock types formed at ca.130 Ma.The monzonites,characterized by high Mg^(#)(50.9-57.9),low Nb/U ratios(2.53-3.89)and depleted isotopic compositions,suggest derivation from asthenospheric mantle modified by slab-derived fluids.The diorites,distinguished by low SiO_(2)(49.5-50.8),high Mg^(#)(66.7-68.5)and an EM2-type enriched mantle isotopic signature,point to a lithospheric mantle source modified by subducted sediment melts.The coexistence of monzonites and diorites suggests a transition in magma source from lithospheric to asthenospheric mantle,implying that lithospheric thinning may have commenced around 130 Ma.The destruction of the NCC was likely driven by localized,small-scale drip-style detachment processes,rather than wholesale lithospheric removal.
基金supported by the National Natural Science Foundation of China(Grant Nos.42172159 and 42302143)the Postdoctora Fellowship Program of the China Postdoctoral Science Foundation(CPSF)(Grant No.GZB20230864).
文摘Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.
基金financially supported by National Natural Science Foundation of China(No.52304136)Young Talent of Lifting Engineering for Science and Technology in Shandong,China(No.SDAST2024QTA060)Key Project of Research and Development in Liaocheng(No.2023YD02)。
文摘It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.
基金supported by the National Natural Science Foundation of China(Grant Nos.51708016,52438007 and 12172036)the R&D program of Beijing Municipal Education Commission(Grant No.KM202110016014)+1 种基金the Pyramid Talent Training Project of Beijing University of Civil Engineering and Architecture(Grant No.JDYC20200307)the Graduate Innovation Program of Beijing University of Civil Engineering and Architecture(Grant No.PG2025060).
文摘The fatigue fracture under cyclic dynamic direct tensions of brittle rock is an important mechanical characteristic index for the evaluation of geological disasters and underground engineering safety.However,most studies focus on macroscopic fracture mechanical properties,and the mechanism linking the macroscopic fracture with the microcrack growth during the cyclic dynamic direct tensile loading of brittle rocks is rarely studied.In this paper,a micro-macro fracture model explaining the stress-strain constitutive relationship is established at the last impact failure after being subjected to multiple cyclic direct tensile impacts of brittle rocks.This model is based on the wing crack extension model under direct tensile loading,the quasi-static and dynamic fracture toughness relationship,the suggested crack rate and strain rate relationship,the relationship of damage and dynamic tensile fatigue life N,the relationship of dynamic fracture toughness and dynamic tensile fatigue life N.The variations of dynamic mechanical properties of rocks with dynamic tensile fatigue life for different initial crack sizes and angles within the rocks are further discussed.The compressive strength,elastic modulus,crack initiation stress,limit crack extension length and crack extension rate descend and the failure strain ascends with an increment of dynamic tensile fatigue life in rocks.This study's results provide help for the safety and stability of the underground surrounding rocks under blasting working or seismic disasters.
基金supported by National Natural Science Foundation of China(Grant Nos.52074312 and 52211530097)CNPC Science and Technology Innovation Foundation(Grant No.2021DQ02-0505).
文摘Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.
基金Supported by Major Instrument Project of National Natural Science Foundation of China(52327803)Major Project of National Natural Science Foundation of China(52192622).
文摘Based on the finite-discrete element method,a three-dimensional numerical model for axial impact rock breaking was established and validated.A computational method for energy conversion during impact rock breaking was proposed,and the effects of conical tooth forward rake angle,rock temperature,and impact velocity on rock breaking characteristics and energy transfer laws were analyzed.The results show that during single impact rock breaking with conical tooth bits,merely 7.52%to 12.51%of the energy is utilized for rock breaking,while a significant 57.26%to 78.10%is dissipated as frictional loss.An insufficient forward rake angle increases tooth penetration depth and frictional loss,whereas an excessive forward rake angle reduces penetration capability,causing bit rebound and greater energy absorption by the drill rod.Thus,an optimal forward rake angle exists.Regarding environmental factors,high temperatures significantly enhance impact-induced rock breaking.Thermal damage from high temperatures reduces rock strength and inhibits its energy absorption.Finally,higher impact velocities intensify rock damage,yet excessively high velocities increase frictional loss and reduce the proportion of energy absorbed by the rock,thereby failing to substantially improve rock breaking efficiency.An optimal impact velocity exists.
基金National Natural Science Foundation of China,52304048Ye Tian,China Postdoctoral Science Foundation,2022M722637,Ye Tian。
文摘Hydrogen,a genuinely clean energy,is a promising alternative to fossil fuels.Inspired by underground gas storage of methane,establishing underground hydrogen storage(UHS)in depleted oil and gas reservoirs has emerged as a significant research focus.Carbonate reservoirs,where widely-presented fractures can facilitate the high-speed injection and production of gases,are hence ideal candidates for building underground hydrogen storage facilities.During the cyclic injection and extraction processes of UHS,the formation is subjected to stress disturbances,leading to stress sensitivity.Understanding the stress sensitivity patterns of carbonate rocks is crucial for optimizing injection and production strategies.This study reconstructed three-dimensional digital models of fractured carbonate rocks from the L gas field using micro-CT scanning technology.Utilizing the finite element method,we investigated the microscopic permeability characteristics of carbonate rocks and analyzed the impact of stress loading direction and confining stress on stress sensitivity.The findings reveal that the stress loading direction significantly influences the stress sensitivity of fractured carbonate rocks.When a stress of 60 MPa is applied perpendicular to the fracture direction,the permeability reduction ratio can reach 17.32%.In contrast,when the same stress is applied parallel to the fracture direction,the permeability reduction ratio is only 4.82%.Furthermore,a simulation of UHS with cyclic injection and production of H2 in the target block was conducted.When both permeability and porosity stress sensitivity were considered,the working gas volume for UHS decreased by only 3.4%,demonstrating that fractured carbonate reservoirs are feasible candidates for constructing underground hydrogen storage.
