期刊文献+
共找到1,291篇文章
< 1 2 65 >
每页显示 20 50 100
Selection of Suitable Maximum-heart-rate Formulas for Use with Karvonen Formula to Calculate Exercise Intensity 被引量:1
1
作者 Jinhua She Hitoshi Nakamura +2 位作者 Koji Makino Yasuhiro Ohyama Hiroshi Hashimoto 《International Journal of Automation and computing》 EI CSCD 2015年第1期62-69,共8页
The Karvonen formula, which is widely used to estimate exercise intensity, contains maximum heart rate, H Rmax, as a variable. This study employed pedaling experiments to assess which of the proposed formulas for calc... The Karvonen formula, which is widely used to estimate exercise intensity, contains maximum heart rate, H Rmax, as a variable. This study employed pedaling experiments to assess which of the proposed formulas for calculating H Rmaxwas the most suitable for use with the Karvonen formula. First, two kinds of experiments involving an ergometer were performed: an all-in-one-day experiment that tested eight pedaling loads in one day, and a one-load-per-day experiment that tested one load per day for eight days.A comparison of the data on 7 subjects showed that the all-in-one-day type of experiment was better for assessing H Rmaxformulas,at least for the load levels tested in our experiments. A statistical analysis of the experimental data on 47 subjects showed two of the H Rmaxformulas to be suitable for use in the Karvonen formula to estimate exercise intensity for males in their 20 s. In addition, the physical characteristics of a person having the greatest impact on exercise intensity were determined. 展开更多
关键词 Borg CR10 scale Karvonen formula exercise intensity maximum heart rate PEDALING statistical analysis
原文传递
Maximum Data Generation Rate Routing Protocol Based on Data Flow Controlling Technology for Rechargeable Wireless Sensor Networks 被引量:2
2
作者 Demin Gao Shuo Zhang +2 位作者 Fuquan Zhang Xijian Fan Jinchi Zhang 《Computers, Materials & Continua》 SCIE EI 2019年第5期649-667,共19页
For rechargeable wireless sensor networks,limited energy storage capacity,dynamic energy supply,low and dynamic duty cycles cause that it is unpractical to maintain a fixed routing path for packets delivery permanentl... For rechargeable wireless sensor networks,limited energy storage capacity,dynamic energy supply,low and dynamic duty cycles cause that it is unpractical to maintain a fixed routing path for packets delivery permanently from a source to destination in a distributed scenario.Therefore,before data delivery,a sensor has to update its waking schedule continuously and share them to its neighbors,which lead to high energy expenditure for reestablishing path links frequently and low efficiency of energy utilization for collecting packets.In this work,we propose the maximum data generation rate routing protocol based on data flow controlling technology.For a sensor,it does not share its waking schedule to its neighbors and cache any waking schedules of other sensors.Hence,the energy consumption for time synchronization,location information and waking schedule shared will be reduced significantly.The saving energy can be used for improving data collection rate.Simulation shows our scheme is efficient to improve packets generation rate in rechargeable wireless sensor networks. 展开更多
关键词 Wireless sensor networks maximum data generation rate rechargeable-WSNs
在线阅读 下载PDF
Effects of site productivity on individual tree maximum basal area growth rates of Eucalyptus pilularis in subtropical Australia
3
作者 P.W.West 《Journal of Forestry Research》 SCIE CAS CSCD 2023年第6期1659-1668,共10页
Inventory data were available from 96 plots of even-aged,monoculture,tall-open forests of Eucalyptus pilularis Smith,aged 2-63 years,growing in sub-tropical regions along the east coast of Australia.A model was develo... Inventory data were available from 96 plots of even-aged,monoculture,tall-open forests of Eucalyptus pilularis Smith,aged 2-63 years,growing in sub-tropical regions along the east coast of Australia.A model was developed relating the maximum possible stem basal area growth rate of individual trees to their stem basal area.For any tree size,this maximum increased as site productivity increased.However,the size at which this maximum occurred decreased as productivity increased.Much research has shown that,at any stand age,trees of a particular stem basal area are taller on more productive sites than on less productive ones.Taller trees incur greater respiratory costs to ensure maintenance of the photo synthetic capacity of their canopies;this reduces their growth rates.It was concluded that trees with larger basal areas will have the maximum possible growth rate on a less productive site,whilst trees with smaller basal areas will have the maximum possible on a more productive site.The model developed may constitute the first stage of a complete individual tree growth model system to predict wood yields from these forests. 展开更多
关键词 Growth model Individual tree maximum growth rate Eucalyptus pilularis Physiological eff ects
在线阅读 下载PDF
Origin of Erosion and Hydraulic Problems of the San Roque Underground Arched Culvert Channel and Its Relationship with the Maximum Flow Rate and the Maximum Permissible Velocity
4
作者 Martín Mundo-Molina Daniel Hernández-Cruz 《Journal of Water Resource and Protection》 2020年第12期1123-1139,共17页
This work presents the hydrologic estimations of the hydraulic underground arched culvert channel (UACC) in Sabinal Basin, Chiapas, México and the hydrological problems associated with it, such as the erosion phe... This work presents the hydrologic estimations of the hydraulic underground arched culvert channel (UACC) in Sabinal Basin, Chiapas, México and the hydrological problems associated with it, such as the erosion phenomenon and abrasion cavity formation in it. On the other hand, the maximum flows that the UACC could transport were analyzed, concluding that it no longer has the hydraulic capacity to transport the flow rate associated to return periods equal to or greater than five years and that maximum permissible velocity UACC’s bottom is 3 m/s. 展开更多
关键词 Collapse Underground Arched Culvert Channel maximum Flow rate maximum Permissible Water Velocity Open Channel Bottom Erosion
在线阅读 下载PDF
含中心距误差的行星轮系最大滑动率与变位系数优化的研究
5
作者 李传祥 陈东 +2 位作者 王朝阳 王晓 徐焕萍 《机械传动》 北大核心 2026年第3期23-30,69,共9页
【目的】针对打捆装备行星减速器在重载时易发生齿面磨损和胶合失效的问题,研究含中心距误差的3K-Ⅰ型行星轮系最大滑动率及其影响因素,旨在通过优化变位系数提升传动性能与寿命。【方法】首先,基于齿轮啮合原理,推导了含中心距误差的... 【目的】针对打捆装备行星减速器在重载时易发生齿面磨损和胶合失效的问题,研究含中心距误差的3K-Ⅰ型行星轮系最大滑动率及其影响因素,旨在通过优化变位系数提升传动性能与寿命。【方法】首先,基于齿轮啮合原理,推导了含中心距误差的行星轮系最大滑动率计算式;其次,利用控制变量法分析了变位系数和齿数比对最大滑动率的影响规律;再次,基于等滑动率原则,结合根切与重合度等约束条件,构建了以各齿轮对滑动率差值之和最小为目标的优化模型;最后,利用Matlab软件进行非线性约束优化求解,并对比分析了将中心距误差等作为设计变量的不同优化方案。【结果】结果表明,变位系数是影响最大滑动率的主导因素。对比发现,将中心距误差作为优化设计变量的方案最为合理,该方案在给定误差范围内显著降低了各齿轮对间的最大滑动率及其差值,其中3对齿轮副的滑动率差值分别降低了19.6%、90.9%、96.1%,有效改善了齿面的滑动平衡性,为行星轮系设计提供了参考。 展开更多
关键词 行星轮系 中心距误差 最大滑动率 变位系数
在线阅读 下载PDF
已投运水电机组调节能力提升研究
6
作者 曾镇铃 韩伶俐 +3 位作者 宗万波 王威 蒋登云 周振忠 《水力发电》 2026年第2期62-68,共7页
电网调度要求水电机组在一次调频某些工况中需超发8%额定有功功率,但水电站受水头变幅、水库调节容量以及机组最大发电能力的限制,无法完全实现电网调度期望的负荷调节范围。针对于此,对当前水电机组设计、运行调度和水电体系规范与电... 电网调度要求水电机组在一次调频某些工况中需超发8%额定有功功率,但水电站受水头变幅、水库调节容量以及机组最大发电能力的限制,无法完全实现电网调度期望的负荷调节范围。针对于此,对当前水电机组设计、运行调度和水电体系规范与电力系统规范矛盾的问题进行了分析,并从水电机组设计优化理念、技术规范协调、政策支持等方面提出相关建议,即可通过安全复核将机组超发功率和发电机最大功率纳入电网调度序列,承担电力系统的调频和备用等任务,从而提升水电站的调峰调频能力和电网的应急保障能力。 展开更多
关键词 调峰调频 额定功率 发电机最大功率 运行最大功率 稳定运行 水电机组
在线阅读 下载PDF
中国洪水预报系统在柳州水文站预报中的应用
7
作者 廖文凯 王乐明 《广西水利水电》 2026年第1期36-39,共4页
采用中国洪水预报系统的三水源蓄满产流模型(SMS3)、滞后演算汇流模型LAG_3和马斯京根分段连续演算模型MSK构建方案,通过设置相关参数,可分析计算最大合成流量、区间面降雨量、摘录同时水位流量、洪峰水位和最大流量等相关因子。利用LIN... 采用中国洪水预报系统的三水源蓄满产流模型(SMS3)、滞后演算汇流模型LAG_3和马斯京根分段连续演算模型MSK构建方案,通过设置相关参数,可分析计算最大合成流量、区间面降雨量、摘录同时水位流量、洪峰水位和最大流量等相关因子。利用LINEST函数快速构建柳州水文站最大合成流量、区间面雨量、同时水位(流量)和洪峰水位(流量)的洪水预报方案。 展开更多
关键词 中国洪水预报系统 最大合成流量 参数设置 相关因子提取 预报方案 柳州水文站
在线阅读 下载PDF
Non-Contact Method of Heart Rate Measurement Based on Facial Tracking 被引量:2
8
作者 Ruqiang Huang Weihua Su +1 位作者 Shiyue Zhang Wei Qin 《Journal of Computer and Communications》 2019年第5期17-28,共12页
Image photoplethysmography can realize low-cost and easy-to-operate non-contact heart rate detection from the facial video, and effectively overcome the limitations of traditional contact method in daily vital sign mo... Image photoplethysmography can realize low-cost and easy-to-operate non-contact heart rate detection from the facial video, and effectively overcome the limitations of traditional contact method in daily vital sign monitoring. However, it is hard to obtain more accurate heart rate detection values under the conditions of subject’s facial movement, weak ambient light intensity and long detection distance, etc. In this article, a non-contact heart rate detection method based on face tracking is proposed, which can effectively improve the accuracy of non-contact heart rate detection method in practical application. The corner tracker algorithm is used to track the human face to reduce the motion artifact caused by the movement of the subject’s face and enhance the use value of the signal. And the maximum ratio combining algorithm is used to weight the pixel space pulse wave signal in the facial region of interest to improve the pulse wave extraction accuracy. We analyzed the facial images collected under different experimental distances and action states. This proposed method significantly reduces the error rate compared with the independent component analysis method. After theoretical analysis and experimental verification, this method effectively reduces the error rate under different experimental variables and has good consistency with the heart rate value collected by the medical physiological vest. This method will help to improve the accuracy of non-contact heart rate detection in complex environments. 展开更多
关键词 HEART rate Non-Contacting maximum RATIO COMBINING FACIAL Video
暂未订购
高强钢商用车油箱托架热冲压成形工艺研究 被引量:7
9
作者 徐勇 陈明 +2 位作者 贾国富 解文龙 张士宏 《塑性工程学报》 北大核心 2025年第1期30-40,共11页
为获得具有大弯曲特征的高强钢商用车油箱托架热冲压成形的最佳工艺参数,首先通过有限元模拟分析了摩擦因数、初始温度和成形速度3个成形工艺参数对托架壁厚和最大减薄率的影响。然后,通过正交试验和极差分析法,获得影响零件热冲压成形... 为获得具有大弯曲特征的高强钢商用车油箱托架热冲压成形的最佳工艺参数,首先通过有限元模拟分析了摩擦因数、初始温度和成形速度3个成形工艺参数对托架壁厚和最大减薄率的影响。然后,通过正交试验和极差分析法,获得影响零件热冲压成形质量的主次因素和热冲压最佳工艺参数。结果表明,零件最大减薄率随初始温度的升高而降低;随摩擦因数和成形速度的增大而增大。正交试验结果表明,摩擦因数对最大减薄率的影响程度最大,其次是初始温度,成形速度的影响最小。在初始温度为920℃、摩擦因数为0.25、成形速度为30 mm·s^(-1)的参数组合下,零件的最大减薄率为12.3%。试验获得零件的最大减薄率为10.1%,从零件上取样进行拉伸得到抗拉强度均大于1500 MPa,平均硬度达到467.33 HV,显微组织为马氏体和残余奥氏体。试验结果表明有限元模拟的预测误差较小,零件无明显缺陷,并获得了最佳成形工艺参数。 展开更多
关键词 油箱托架 热冲压成形 最大减薄率
原文传递
伊犁黄土含砂量对边坡生态修复植物生长的影响 被引量:1
10
作者 袁胜洋 杨贵侠 +4 位作者 李思环 楚建勋 杨小玲 马杰 刘先峰 《长江科学院院报》 北大核心 2025年第5期104-110,118,共8页
为探究不同含砂量对边坡生态修复植物生长的影响,基于层次分析法筛选植物,针对伊犁黄土开展加砂种植试验,结合植物覆盖度、土壤累计蒸发量、最大裂缝率的变化规律展开研究。结果表明:加砂能缩短发芽时间、提高发芽率。生长初期水分足时... 为探究不同含砂量对边坡生态修复植物生长的影响,基于层次分析法筛选植物,针对伊犁黄土开展加砂种植试验,结合植物覆盖度、土壤累计蒸发量、最大裂缝率的变化规律展开研究。结果表明:加砂能缩短发芽时间、提高发芽率。生长初期水分足时,发芽率、覆盖度等与含砂量正相关,干旱时覆盖度随含砂量增大而减小。土壤水分累计蒸发量与含砂量正相关,且受温度影响明显,温度升高,不同含砂量试样的累计蒸发量差距增大,温度降低,差距增量减小。以40%含砂量为界,<40%时,含砂量与最大裂缝率正相关,最大覆盖度随最大裂缝率增大而增大;>40%时,二者负相关,最大覆盖度随最大裂缝率增大而减小。野外或缺养护时,20%含砂量最佳;有人为养护时,60%含砂量最佳;平地且有人为养护时,全砂最佳。研究成果可为西北交通线路边坡植物种植提供参考。 展开更多
关键词 含砂量 伊犁黄土 覆盖度 累计蒸发量 最大裂缝率
在线阅读 下载PDF
Comparative Study of the Effect of Shading Rate on the Electrical Parameters of CIGS and CdTe/CdS Solar Modules
11
作者 El Hadji Abdoulaye Niass Oumar Absatou Niasse +3 位作者 Nacire Mbengue Zakaria Makir Zouhair Sofiani Bassirou Ba 《World Journal of Condensed Matter Physics》 CAS 2022年第4期39-45,共7页
In this paper, a comparative study of the maximum power on the shading rate on the maximum power of thin film PV modules. Thus two thin film PV modules of type Copper indium gallium selenide, CIGS, of 90W power and a ... In this paper, a comparative study of the maximum power on the shading rate on the maximum power of thin film PV modules. Thus two thin film PV modules of type Copper indium gallium selenide, CIGS, of 90W power and a CdTe (Cadmium telluride)/CdS (Cadmium sulfide) module, of maximum power 75 W. These modules, reference SN-CIGS90 and CX3 75 were tested under the conditions of the installation site to ensure their proper functioning and to determine the initial values of electrical parameters before shading. The results obtained are as follows: for the CIGS: Pm (80.717 W);Vco (23.06 V), Icc (3.5 A) and for the CdTe:Pm (54.914 W);Vco (35.52 V), Icc (1.546 A). After this characterization test, the modules are exposed to real operating conditions at the Center for Study and Research on the renewable energy (CERER), Cheikh Anta Diop University in Dakar. Four types of shading are performed on each module with the same mask: partial shading at 25%, 50%, 75% and complete shading at 100%. The comparison of the variation rates obtained on the experimental values of the 4 types of shading carried out on each module, shows that, the phenomenon of shading constitutes an environmental factor which influences negatively the maximum power of the thin film PV modules. But this reduction depends on the surface of the shaded module, the nature of the mask but also the technology used. Indeed, for a shading of 25% of the surface of the two modules, we note a reduction of 21.32% of power for the CIGS, against 40.53% for the CdTe/CdS, that is to say a difference which approaches 20%. 展开更多
关键词 CIGS CdTe/CdS Shading rate maximum Power MASK
在线阅读 下载PDF
Recovery Capacity, Haemodynamic and Blood Lactate Changes during Training and Competition in Elite Congolese Karate Athletes
12
作者 Jean Georges André Moulongo Jean Martin Moussoki +4 位作者 Elvina Lys Surêche Massamba Fêtra Nella Massala Kitanga Bernard Packa Tchissambou Jean Robert Mabiala Babela Alphonse Massamba 《World Journal of Cardiovascular Diseases》 2020年第5期257-273,共17页
Background: Rare are the studies which treated the effect of training and successive fights of karate on haemodynamic and blood lactate concentrations responses. Objectives: To evaluate and analyze the aerobic capacit... Background: Rare are the studies which treated the effect of training and successive fights of karate on haemodynamic and blood lactate concentrations responses. Objectives: To evaluate and analyze the aerobic capacity of elite Congolese karate athletes, as well as their haemodynamic and blood lactate concentrations responses changes during Ruffier test and stimulated competition. Methods: Twelve karate athletes (6 seniors and 6 juniors) took part in the study. These karate athletes were selected within the national karate teams (senior and junior) of Congo-Brazzaville. Anthropometric, bioenergetic and haemodynamic (HR, SBP, DBP) parameters and blood lactate [La] concentrations were measured at rest, immediately after the end of Ruffier test and each fight (n = 3). Results: Peak aerobic power (PAP) and maximum oxygen uptake (VO2 max) values averaged 437 ± 23 watts and 57.61 ± 2.2 ml/kg/mn, values varying as function as age division (senior vs junior). The recovery index was 5.4 ± 3.4 for juniors and 6.8 ± 3.2 for seniors. SBP, HR and [La] concentrations increased significantly during fights, compared to the resting values. HRmax was 182.3 ± 1.6 bpm (89% theoretical HRmax) for seniors and 182.0 ± 13.5 bpm (86% theoretical HRmax) for juniors. Peak [La] concentrations were 10.3 ± 1.5 mmol/l for seniors and 10.8 ± 1.2 mmol/l for juniors. Conclusion: Congolese karate athletes call upon high levels of the anaerobic and aerobic capacities. The karate training program in Congo should emphasize more gold improvising lower body anaerobic power and endurance. 展开更多
关键词 KArate Peak AEROBIC Power maximum Oxygen Uptake Heart rate Blood LACTATE
在线阅读 下载PDF
水流速对福寿螺生长及摄食率的影响
13
作者 王淼 张玉平 袁永达 《生物安全学报(中英文)》 北大核心 2025年第4期331-337,共7页
【目的】探究福寿螺在不同流速下的生长及摄食情况,以期指导流水情况下的福寿螺防控。【方法】通过室内模拟试验,分别在3.8、7.7 cm·s^(-1)和无流速下,测定和分析福寿螺的壳高、体重、特定生长率和最大摄食率等指标。【结果】不同... 【目的】探究福寿螺在不同流速下的生长及摄食情况,以期指导流水情况下的福寿螺防控。【方法】通过室内模拟试验,分别在3.8、7.7 cm·s^(-1)和无流速下,测定和分析福寿螺的壳高、体重、特定生长率和最大摄食率等指标。【结果】不同流速下,福寿螺的平均壳高具显著差异(P<0.05),而平均体重无显著差异(P>0.05)。在3.8 cm·s^(-1)流速下的壳高增长率、体重增长率和特定生长率均高于7.7 cm·s^(-1)和无流速,但壳高增长率无显著差异(P>0.05),体重增长率和特定生长率均具显著差异(P<0.05)。3种流速下福寿螺的总死亡率为25.6%。其中,3.8 cm·s^(-1)流速下的死亡率为30.0%,7.7 cm·s^(-1)和无流速下的死亡率均为23.3%,不同流速下的死亡率无显著差异(P>0.05)。福寿螺在7.7 cm·s^(-1)流速下的最大摄食率显著高于3.8 cm·s^(-1)流速(P<0.05),无流速下的最大摄食率介于两者之间,且分别与两者的最大摄食率无显著差异(P>0.05)。【结论】适宜的流速会促进福寿螺的生长,但当流速继续增大时,限制福寿螺的生长,并显著提高其最大摄食率。 展开更多
关键词 福寿螺 水流速 特定生长率 最大摄食率
在线阅读 下载PDF
基于二次CEEMDAN-CCJC与ELMSSCT的滚动轴承故障性时变瞬时特征提取
14
作者 张亢 曹振华 +2 位作者 麻云娇 陈向民 李超 《航空动力学报》 北大核心 2025年第11期478-488,共11页
针对滚动轴承早期故障时的故障性时变瞬时特征微弱且受噪声干扰不易识别的问题,将降噪和特征增强结合考虑。首先根据自适应噪声完全集合经验模态分解(CEEMDAN)的分解规律和分量相关系数特征,构建相关系数跳变准则(CCJC),通过二次CEEMDAN... 针对滚动轴承早期故障时的故障性时变瞬时特征微弱且受噪声干扰不易识别的问题,将降噪和特征增强结合考虑。首先根据自适应噪声完全集合经验模态分解(CEEMDAN)的分解规律和分量相关系数特征,构建相关系数跳变准则(CCJC),通过二次CEEMDAN-CCJC方式对原始滚动轴承振动信号进行降噪;然后采用增强局部最大频率啁啾率同步压缩啁啾变换(ELMSSCT)将降噪后的信号表征至时频啁啾率(T-F-C)空间,以此将信号能量聚集于滚动轴承固有频率区域,从而增强固有频率附近的故障性时变瞬时特征,同时去除边频与残余噪声干扰;最后从滚动轴承时域重构信号的Hilbert包络谱辨识故障特征频率。通过对滚动轴承故障仿真信号和实验信号的分析,结果表明所提方法可以清晰准确地提取滚动轴承的故障性时变瞬时特征,且故障特征谱线的频率值与理论值误差不超过1.2%。 展开更多
关键词 滚动轴承 故障性时变瞬时特征 自适应噪声完全集合经验模态分解(CEEMDAN) 相关系数跳变准则(CCJC) 增强局部最大频率啁啾率同步压缩啁啾变换(ELMSSCT)
原文传递
基于形状记忆磁流变弹性体的胀形成形技术
15
作者 王军 杨冰雪 姚永涛 《航空科学技术》 2025年第5期97-103,共7页
随着胀形成形技术逐渐广泛应用于航空、航天等领域复杂管件的制备,开发具有磁场调节和形状记忆性能的软模胀形成形技术,对降低工件减薄率和脱模难度有重要意义。为此,本文提出一种形状记忆磁流变弹性体软模介质,分析了不同磁性颗粒含量... 随着胀形成形技术逐渐广泛应用于航空、航天等领域复杂管件的制备,开发具有磁场调节和形状记忆性能的软模胀形成形技术,对降低工件减薄率和脱模难度有重要意义。为此,本文提出一种形状记忆磁流变弹性体软模介质,分析了不同磁性颗粒含量对磁流变弹性体形状记忆性能和力学性能的影响,通过有限元仿真,模拟了胀形过程中软模介质对目标管件的成形精度的影响,然后对目标零件进行胀形试验分析。试验结果表明,形状记忆磁流变弹性体软模介质形状回复率可达到90.9%,同时最大减薄率为13.2%,且仿真结果与试验误差不超过4.93%,可有效解决过度减薄和脱模困难的问题。 展开更多
关键词 形状记忆性能 磁流变弹性体 软模胀形技术 磁场调控 最大减薄率
在线阅读 下载PDF
A NEW DESIGN METHOD OF CDMA SPREADING CODES BASED ON MULTI-RATE UNITARY FILTER BANK
16
作者 Bi Jianxin Wang Yingmin Yi Kechu(National Key Lab. on ISN, Xidian University, Xi’an 710071) 《Journal of Electronics(China)》 2001年第3期204-211,共8页
It is well-known that the multi-valued CDMA spreading codes can be designed by means of a pair of mirror multi-rate filter banks based on some optimizing criterion. This paper indicates that there exists a theoretical... It is well-known that the multi-valued CDMA spreading codes can be designed by means of a pair of mirror multi-rate filter banks based on some optimizing criterion. This paper indicates that there exists a theoretical bound in the performance of its circulating correlation property, which is given by an explicit expression. Based on this analysis, a criterion of maximizing entropy is proposed to design such codes. Computer simulation result suggests that the resulted codes outperform the conventional binary balanced Gold codes for an asynchronous CDMA system. 展开更多
关键词 MULTI-rate UNITARY filter BANK CDMA SPREADING code maximum ENTROPY criteria
在线阅读 下载PDF
筋膜间平面解离导向的“五步法”HoLEP在大体积BPH患者中的应用
17
作者 张建波 王祖金 +2 位作者 涂有宝 卢高翔 周俊 《江苏医药》 2025年第11期1094-1099,共6页
目的探讨筋膜间平面解离导向的“五步法”经尿道钬激光前列腺剜除术(HoLEP)对大体积良性前列腺增生(BPH)患者尿控恢复及性功能的影响。方法选取96例大体积BPH患者作为研究对象,采用随机数字表法分为观察组及对照组,每组48例。对照组给... 目的探讨筋膜间平面解离导向的“五步法”经尿道钬激光前列腺剜除术(HoLEP)对大体积良性前列腺增生(BPH)患者尿控恢复及性功能的影响。方法选取96例大体积BPH患者作为研究对象,采用随机数字表法分为观察组及对照组,每组48例。对照组给予传统双极等离子前列腺剜除术治疗,观察组给予筋膜间平面解离导向的“五步法”HoLEP治疗。比较两组术后1个月、3个月尿控恢复情况,比较两组术前以及术后3个月、6个月及12个月国际勃起功能指数(IIEF-5)评分,比较两组术前、术后3个月男性性健康问卷射精功能障碍(MSHQ-EjD)评分(包括射精功能评分、射精困扰度评分)、尿流动力学[膀胱残余尿量(PVR)、最大尿流率(Qmax)],出院前比较两组术后并发症的发生率。结果术后3个月,观察组尿控恢复情况较对照组改善(P<0.05)。术后3个月、6个月和12个月,两组患者的IIEF-5评分较术前升高(P<0.05),且观察组患者IIEF-5评分高于对照组(P<0.05)。术后3个月两组患者射精功能评分和射精困扰度评分降低,但观察组射精功能评分高于对照组,观察组射精困扰度评分低于对照组(P<0.05)。术后3个月,观察组患者的PVR低于对照组,Qmax高于对照组(P<0.05)。观察组并发症发生率低于对照组(P<0.05)。结论筋膜间平面解离导向的“五步法”HoLEP可改善大体积BPH患者尿控恢复情况及性功能。 展开更多
关键词 大体积良性前列腺增生 经尿道钬激光前列腺剜除术 性功能 膀胱残余尿量 最大尿流率
原文传递
低功率(50~60W)钬激光经尿道前列腺剜除术治疗良性前列腺增生症的效果
18
作者 林若飞 《中国医药指南》 2025年第26期96-98,共3页
目的对比低功率(50~60W)钬激光前列腺剜除术(HoLEP)与前列腺等离子剜除术(TUPKEP)治疗良性前列腺增生症(BPH)的效果。方法回顾性分析2021年11月至2024年11月厦门市中医院64例BPH患者的临床资料,按不同手术方式分为两组。行低功率(50~60 ... 目的对比低功率(50~60W)钬激光前列腺剜除术(HoLEP)与前列腺等离子剜除术(TUPKEP)治疗良性前列腺增生症(BPH)的效果。方法回顾性分析2021年11月至2024年11月厦门市中医院64例BPH患者的临床资料,按不同手术方式分为两组。行低功率(50~60 W)HoLEP治疗的36例设为钬激光组,行TUPKEP治疗的28例设为等离子组。对比两组围手术期指标、前列腺改善情况、血清前列腺特异性抗原(PSA)水平及并发症发生率。结果两组前列腺切除体积、手术耗时对比,差异无统计学意义(P>0.05),但钬激光组膀胱冲洗时间、住院用时较等离子组短,术中失血量较等离子组少(P<0.05)。术后3个月钬激光组国际前列腺症状评分、残余尿量较等离子组低,最大尿流率较等离子组高(P<0.05);术后3个月两组血清前列腺特异性抗原(PSA)水平较术前降低(P<0.05),但两组对比,差异无统计学意义(P>0.05)。钬激光组并发症较等离子组少(P<0.05)。结论低功率(50~60W)HoLEP与TUPKEP均可有效调节BPH患者血清PSA水平,但HoLEP较TUPKEP具有术中出血量少、并发症少、膀胱冲洗及住院时间短的优势,且更有助于促进前列腺改善。 展开更多
关键词 良性前列腺增生症 最大尿流率 并发症 前列腺特异性抗原
暂未订购
Processing of Landsat 8 Imagery and Ground Gamma-Ray Spectrometry for Geologic Mapping and Dose-Rate Assessment, Wadi Diit along the Red Sea Coast, Egypt
19
作者 Ahmed E. Abdel Gawad Atef M. Abu Donia Mahmoud Elsaid 《Open Journal of Geology》 2016年第8期911-930,共20页
Maximum Likelihood (MLH) supervised classification of atmospherically corrected Landsat 8 imagery was applied successfully for delineating main geologic units with a good accuracy (about 90%) according to reliable gro... Maximum Likelihood (MLH) supervised classification of atmospherically corrected Landsat 8 imagery was applied successfully for delineating main geologic units with a good accuracy (about 90%) according to reliable ground truth areas, which reflected the ability of remote sensing data in mapping poorly-accessed and remote regions such as playa (Sabkha) environs, subdued topography and sand dunes. Ground gamma-ray spectrometric survey was to delineate radioactive anomalies within Quaternary sediments at Wadi Diit. The mean absorbed dose rate (D), annual effective dose equivalent (AEDE) and external hazard index (H<sub>ex</sub>) were found to be within the average worldwide ranges. Therefore, Wadi Diit environment is said to be radiological hazard safe except at the black-sand lens whose absorbed dose rate of 100.77 nGy/h exceeds the world average. So, the inhabitants will receive a relatively high radioactive dose generated mainly by monazite and zircon minerals from black-sand lens. 展开更多
关键词 Landsat 8 Imagery Image Processing maximum Likelihood Classification Environmental Monitoring Absorbed Dose rate Hazard Index
在线阅读 下载PDF
济生肾气丸联合内分泌治疗对晚期前列腺癌患者下尿路梗阻症状的效果
20
作者 丁睿 过俊杰 +2 位作者 周汶君 李建忠 陈健 《实用临床医药杂志》 2025年第20期56-59,共4页
目的观察济生肾气丸联合内分泌治疗对晚期前列腺癌(PCa)患者下尿路梗阻症状的效果。方法将68例合并下尿路梗阻症状的晚期PCa患者随机分为观察组和对照组,每组34例。对照组采用单纯内分泌治疗,观察组在对照组基础上加用济生肾气丸治疗,... 目的观察济生肾气丸联合内分泌治疗对晚期前列腺癌(PCa)患者下尿路梗阻症状的效果。方法将68例合并下尿路梗阻症状的晚期PCa患者随机分为观察组和对照组,每组34例。对照组采用单纯内分泌治疗,观察组在对照组基础上加用济生肾气丸治疗,疗程均为3个月。比较2组治疗总有效率、中医证候积分、最大尿流率(Q_(max))、残余尿量(RUV)、国际前列腺症状(IPSS)评分、前列腺特异性抗原(PSA)水平和生活质量量表(QOL)评分。结果观察组治疗总有效率为94.12%,高于对照组的82.35%,差异有统计学意义(P<0.05)。治疗后,2组中医证候积分均下降,且观察组中医证候积分低于对照组,差异均有统计学意义(P<0.05)。治疗后,2组Q_(max)均升高,RUV均下降,且观察组Q_(max)高于对照组,RUV低于对照组,差异均有统计学意义(P<0.05)。治疗后,2组PSA水平均较治疗前下降,差异有统计学意义(P<0.05),但2组PSA水平比较,差异无统计学意义(P>0.05)。治疗后,2组IPSS评分均下降,QOL评分均升高,且观察组IPSS评分低于对照组,QOL评分高于对照组,差异均有统计学意义(P<0.05)。结论济生肾气丸联合内分泌治疗能有效治疗晚期PCa患者排尿梗阻症状,改善中医证候,提高生活质量。 展开更多
关键词 济生肾气丸 内分泌治疗 前列腺癌 尿路梗阻 最大尿流率 残余尿量 中医证候积分 前列腺特异性抗原
暂未订购
上一页 1 2 65 下一页 到第
使用帮助 返回顶部