The seemingly useless reeds are prepared as thermal insulation materials,which not only meet the requirements of environmental sustainability but also enhance the added value of reeds,creating new economic benefits.Th...The seemingly useless reeds are prepared as thermal insulation materials,which not only meet the requirements of environmental sustainability but also enhance the added value of reeds,creating new economic benefits.The hydrophobicity of raw biomass surfaces leads to problems such as weak bonding strength and non-dense structure in the formed materials,as well as issues related to the residual insect infestations on the surface.In this study,reed straw was used as the raw material,and foamed geopolymer was used as the binder to prepare building insulation materials based reed.To improve the interfacial adhesion performance between reed straw and foamed geopolymer,a thermochemical modification method-thermal carbonization,was proposed.In this study,the mechanical properties and hydraulic properties of the studied materials with different degrees of surface thermal modification were tested,especially the fire resistance performance,and weathering resistance performance rarely found in published literature.When the surface thermal modification condition of reed straw was 250℃(30 min),the comprehensive performance of reed-based building insulation materials was the best,when the studied material density was 321.3 kg/m^(3);the compressive strength was 0.59 MPa;the thermal conductivity was 0.101 W/(m·K);the pH was 11.27;the moisture absorption rate was 25.1%,and the compressive strength loss rate in wet-dry cycles was 18.5%.In addition,it had excellent fire resistance performance and weathering resistance performance.This new material can be widely used to improve the thermal insulation of traditional buildings and as sandwich filler in prefabricated buildings,such as preparing insulating walls.展开更多
Magnesium-based materials,including magnesium alloys,have emerged as a promising class of biodegradable materials with potential applications in cancer therapy due to their unique properties,including biocompatibility...Magnesium-based materials,including magnesium alloys,have emerged as a promising class of biodegradable materials with potential applications in cancer therapy due to their unique properties,including biocompatibility,biodegradability,and the ability to modulate the tumor microenvironment.The main degradation products of magnesium alloys are magnesium ions(Mg^(2+)),hydrogen(H_(2)),and magnesium hydroxide(Mg(OH)_(2)).Magnesium ions can regulate tumor growth and metastasis by mediating the inflammatory response and oxidative stress,maintaining genomic stability,and affecting the tumor microenvironment.Similarly,hydrogen can inhibit tumorigenesis through antioxidant and anti-inflammatory properties.Moreover,Mg(OH)_(2) can alter the pH of the microenvironment,impacting tumorigenesis.Biodegradable magnesium alloys serve various functions in clinical applications,including,but not limited to,bonefixation,coronary stents,and drug carriers.Nonetheless,the anti-tumor mechanism associated with magnesium-based materials has not been thoroughly investigated.This review provides a comprehensive overview of the current state of magnesium-based therapies for cancer.It highlights the mechanisms of action,identifies the challenges that must be addressed,and discusses prospects for oncological applications.展开更多
The rapid development of portable electronics,wearable technologies,and healthcare monitoring systems necessitates the innovation of flexible energy storage systems.Considering environmental pollution and the depletio...The rapid development of portable electronics,wearable technologies,and healthcare monitoring systems necessitates the innovation of flexible energy storage systems.Considering environmental pollution and the depletion of fossil resources,the utilization of renewable resources to engineer advanced flexible materials has become especially crucial.Cellulose,the most abundant natural polymer,has emerged as a promising precursor for advanced functional materials due to its unique structure and properties.Typically,the easy processability,tunable chemical structure,self-assembly behavior,mechanical strength,and reinforcing capability enable its utilization as binder,substrate,hybrid electrode,separator,and electrolyte reservoir for flexible energy storage devices.This review comprehensively summarizes the design,fabrication,and mechanical and electrochemical performances of cellulose-based materials.The structure and unique properties of cellulose are first briefly introduced.Then,the construction of cellulose-based materials in the forms of 1D fibers/filaments,2D films/membranes,3D hydrogels and aerogels is discussed,and the merits of cellulose in these materials are emphasized.After that,the various advanced applications in supercapacitors,lithium-ion batteries,lithium-sulfur batteries,sodium-ion batteries,metal-air batteries,and Zn-ion batteries are presented in detail.Finally,an outlook of the potential challenges and future perspectives in advanced cellulose-based materials for flexible energy storage systems is discussed.展开更多
Material growth and device fabrication of the first 1.3μm quantum well （QW） edge emitting laser diodes in China are reported. Through the optimization of the molecular beam epitaxy （MBE） growth conditions and the...Material growth and device fabrication of the first 1.3μm quantum well （QW） edge emitting laser diodes in China are reported. Through the optimization of the molecular beam epitaxy （MBE） growth conditions and the tuning of the indium and nitrogen composition of the GalnNAs QWs, the emission wavelengths of the QWs can be tuned to 1.3μm. Ridge geometry waveguide laser diodes are fabricated. The lasing wavelength is 1.3μm under continuous current injection at room temperature with threshold current of 1kA/cm^2 for the laser diode structures with the cleaved facet mirrors. The output light power over 30mW is obtained.展开更多
In the field of optical interconnecting network and in super fast photonic computing system, the tree architecture and optical nonlinear materials can play a significant role. Nonlinear optical material may find impor...In the field of optical interconnecting network and in super fast photonic computing system, the tree architecture and optical nonlinear materials can play a significant role. Nonlinear optical material may find important uses in optical switching. Optical switch using nonlinear material makes it possible for one optical signal to control and switch another optical signal through nonlinear interaction in a material. In this communication such materials have been successfully exploited to design an all-optical tree-net architecture, which can be utilized for time division multiplexing scheme in all-optical domain.展开更多
Optics is a potential candidate in information, data, and image processing. In all-optical data and information processing, optics has been used as information carrying signal because of its inherent advantages of par...Optics is a potential candidate in information, data, and image processing. In all-optical data and information processing, optics has been used as information carrying signal because of its inherent advantages of parallelism. Several optical methods are proposed in support of the above processing. In many algebraic, arithmetic, and image processing schemes fundamental logic and memory operations are conducted exploring all-optical devices. In this communication we report an all-optical matrix multiplication operation with non-linear material based switching circuit.展开更多
The limitations in electronics in arithmetic, algebraic & logic processing are well known. Very high speed performance (above GHz) are not expected at all in conventional electronic mechanism. To achieve high spee...The limitations in electronics in arithmetic, algebraic & logic processing are well known. Very high speed performance (above GHz) are not expected at all in conventional electronic mechanism. To achieve high speed performance we may think on the introduction of optics instead of electronics for information, processing and computing. Non-linear optical material is a successful candidate in this regard to play a major role in the optically controlled switching systems and therefore in all-optical parallel computation these materials can show a very good potential aspect. In this paper, we have proposed a new method of an optical half adder as well as full adder circuit for binary addition using non-linear and linear optical materials.展开更多
In the field of optical computing and parallel information processing, several number systems have been used for different arithmetic and algebraic operations. Therefore an efficient conversion scheme from one number ...In the field of optical computing and parallel information processing, several number systems have been used for different arithmetic and algebraic operations. Therefore an efficient conversion scheme from one number system to another is very important. Modified trinary number （MTN） has already taken a significant role towards carry and borrow free arithmetic operations. In this communication, we propose a tree-net architecture based all optical conversion scheme from binary number to its MTN form. Optical switch using nonlinear material （NLM） plays an important role.展开更多
Lianli Copper Industry Group has drafted and implemented'4 industrial parks+10 industrial divisions'development strategy for constructing domestic&overseas'integrated,chain-based,and modernized industr...Lianli Copper Industry Group has drafted and implemented'4 industrial parks+10 industrial divisions'development strategy for constructing domestic&overseas'integrated,chain-based,and modernized industry'by relying on existing foundation during the'Thirteenth Five Year Plan'period.One of展开更多
Unbound Granular Materials(UGM)base is widely used in permeable pavement structure for infiltration,water storage,and load bearing.However,because of large void content,UGM base easily deforms under repeated loads,res...Unbound Granular Materials(UGM)base is widely used in permeable pavement structure for infiltration,water storage,and load bearing.However,because of large void content,UGM base easily deforms under repeated loads,resulting in surface rutting and even reducing durability of permeable pavement.Thus,research on practical deformation prediction model of UGM base is necessary to improve the pavement structure design and evaluate the base layer construction quality.This study conducted laboratory and field tests to develop a deformation prediction model of UGM base under varied stress states.The deformation of UGM specimen was tested and analyzed through triaxial shear test and dynamic triaxial repeated load test,with varied confining pressures and Shear Stress-strength Ratios(SSR).A laboratory deformation model based on SSR was developed,and the linear relationship between total deformation and permanent deformation was obtained.The deformation of UGM base in situ was tested with Light Weight Deflectometer(LWD).The trends of laboratory deformation model and field test results were similar,and deformation prediction model for field was fitted.The values of parameters in permanent deformation model were recommended in varied stress ranges,based on mathematical analysis.Accordingly,the deformation of UGM base can be estimated.This study developed a model to estimate the permanent deformation of UGM based on deformation data from field and laboratory tests.展开更多
The shortage of fresh water in the world has brought upon a serious crisis to human health and economic development.Solar‐driven interfacial photothermal conversion water evaporation including evaporating seawater,la...The shortage of fresh water in the world has brought upon a serious crisis to human health and economic development.Solar‐driven interfacial photothermal conversion water evaporation including evaporating seawater,lake water,or river water has been recognized as an environmentally friendly process for obtaining clean water in a low‐cost way.However,water transport is restricted by itself by solar energy absorption capacity's limits,especially for finite evaporation rates and insufficient working life.Therefore,it is important to seek photothermal conversion materials that can efficiently absorb solar energy and reasonably design solar‐driven interfacial photothermal conversion water evaporation devices.This paper reviews the research progress of carbon‐based photothermal conversion materials and the mechanism for solar‐driven interfacial photothermal conversion water evaporation,as well as the summary of the design and development of the devices.Based on the research progress and achievements of photothermal conversion materials and devices in the fields of seawater desalination and photothermal electric energy generation in recent years,the challenges and opportunities faced by carbon‐based photothermal conversion materials and devices are discussed.The prospect of the practical application of solar‐driven interfacial photothermal conversion evaporation technology is foreseen,and theoretical guidance is provided for the further development of this technology.展开更多
High performance aluminosilicate based cementitious materials were produced using calcined gangue as one of the major raw materials. The gangue was calcined at 500℃. The main constituent was calcined gangue, fly ash ...High performance aluminosilicate based cementitious materials were produced using calcined gangue as one of the major raw materials. The gangue was calcined at 500℃. The main constituent was calcined gangue, fly ash and slag, while alkali-silicate solutions were used as the diagenetic agent. The structure of gangue-containing aluminosilicate based cementitious materials was studied by the methods of IR, NMR and SEM. The results show that the mechanical properties are affected by the mass ratio between the gangue, slag and fly ash, the kind of activator and additional salt. For 28-day curing time, the compressive strength of the sample with a mass proportion of 2：1：1 （gangue： slag： fly ash） is 58.9 MPa, while the compressive strength of the sample containing 80wt% gangue can still be up to 52.3 MPa. The larger K^＋ favors the formation of large silicate oligomers with which AI（OH）4- prefers to bind. Therefore, in Na-K compounding activator solutions more oligomers exist which result in a stronger compressive strength of aluminosilicate-based cementitious materials than in the case of Na-containing activator. The reasons for this were found through IR and NMR analysis. Glauber＇s salt reduces the 3-day compressive strength of the paste, but increases its 7-day and 28-day compressive strengths.展开更多
Combined with DTG analysis, X-Ray diffraction analysis （XRD） and field emission scanning electron microscopy analysis （FSEM） affiliated with energy dispersive spectrometer analysis （EDS）, the early hydration and...Combined with DTG analysis, X-Ray diffraction analysis （XRD） and field emission scanning electron microscopy analysis （FSEM） affiliated with energy dispersive spectrometer analysis （EDS）, the early hydration and carbonation behavior of cement paste compacts incorporated with 30% of dolomite powder at low water to cement ratio （0.15） was investigated. The results showed that early carbonation curing was capable of developing rapid early strength. It is noted that the carbonation duration should be strictly controlled otherwise subsequent hydration might be hindered. Dolomite powder acted as nuclei of crystallization, resulting in acceleration of products formation and refinement of products crystal size. Therefore, as for cement-based material, it was found that early carbonation could reduce cement dosages to a large extent and promote rapid strength gain resulting from rapid formation of products, supplemental enhancement due to water release in the reaction of carbonation, and formation ofnanometer CaCO3 skeleton network at early age.展开更多
The electrode materials as the key component of supercapacitors have attracted considerable research interests, especially for nickel/cobalt based materials by virtue of their superior electrochemical performance with...The electrode materials as the key component of supercapacitors have attracted considerable research interests, especially for nickel/cobalt based materials by virtue of their superior electrochemical performance with multiple oxidation states for richer redox reactions, abundant natural resources, lower prices and toxicity. There are many advanced electrodes based on the nickel/cobalt materials exploited for the application of supercapacitors, however, some controversial statements have induced some confusion. Herein, we refine the mechanism of energy storage for the nickel/cobalt based materials for supercapacitors and reclassify them into battery-type materials with the corresponding devices named as hybrid supercapacitors.展开更多
High lattice match growth of InAsSb based materials on GaSb substrates is demonstrated. The present results indicate that a stable substrate temperature and the optimal flux ratios are of critical importance in achiev...High lattice match growth of InAsSb based materials on GaSb substrates is demonstrated. The present results indicate that a stable substrate temperature and the optimal flux ratios are of critical importance in achieving a homogeneous InAsSb based material composition throughout the growth period. The quality of these epilayers is assessed using a high-resolution x-ray diffraction and atomic force microscope. The mismatch between the GaSb substrate and InAsSb alloy achieves almost zero, and the rms surface roughness of InAsSb alloy achieves around 1.7A over an area of 28μm × 28μm. At the same time, the mismatches between GaSb and InAs/InAs0.73Sb0.27 superlattices （SLs） achieve approximately 100 arcsec （75 periods） and zero （300 periods）, with the surface rms roughnesses of InAs/InAs0.73Sb0.27 SLs around 1.8 A （75 periods） and 2.1A （300 periods） over an area of 20 μm×20 μm, respectively. After fabrication and characterization of the devices, the dynamic resistance of the n-barrier-n InAsSb photodetector near zero bias is of the order of 10^6Ω·cm^2. At 77K, the positive-intrinsic-negative photodetectors are demonstrated in InAsSb and InAs/InAsSb SL （75 periods） materials, exhibiting fifty-percent cutoff wavelengths of 3.8μm and 5.1μm, respectively.展开更多
The properties of road base course materials of granular soils stabilized by AGS granular soil stabilizing cement were studied.The AGS cement has an expansibility to a certain degree,so the dry shrinkage of AGS cemen...The properties of road base course materials of granular soils stabilized by AGS granular soil stabilizing cement were studied.The AGS cement has an expansibility to a certain degree,so the dry shrinkage of AGS cement paste and AGS stabilized granular is much lower than that of Portland slag cement.AGS has a good suitability to granular soils.Granular soils stabilized by AGS have a much higher strength than that of soils stabilized by P S cement.The same strength can be reached with 20% reduction of cement dosage for AGS cement.And their elastic and resilient modulus are similar,but the former has a much higher tensile splitting strength,so the AGS stabilized granular has a much better anti-cracking performance than that of the P S stabilized granular.The reduced value of the strength and the density with the retard time for the granular soils stabilized by AGS is lower than that for P S cement.展开更多
ZnFe 2O 4 and ZnFe 2O 4 based materials were tested to obtain the electrical conductivity and corrosion resistance in melting bath for aluminum electrolysis. The results proved that adequate additives, such as Ni 2O 3...ZnFe 2O 4 and ZnFe 2O 4 based materials were tested to obtain the electrical conductivity and corrosion resistance in melting bath for aluminum electrolysis. The results proved that adequate additives, such as Ni 2O 3 CuO, Cu, ZnO and CeO 2 would increase the electrical conductivity, and the ZnFe 2O 4 based anodes with these additives were of good corrosion resistance. The current density on anode, the mole ratio of NaF/AlF 3 (MR) and the content of alumina in the bath effect the anode corrosion rate in different way.展开更多
The paper presents laboratory test results on hydraulically bound road base materials containing high volume of steel slag and blast furnace slag waste dusts compared with control mixtures. These mixtures contain high...The paper presents laboratory test results on hydraulically bound road base materials containing high volume of steel slag and blast furnace slag waste dusts compared with control mixtures. These mixtures contain higher levels of （4mm-0.0 mm） dust, than would be the case in standard un bound road base mixtures. The combined influence of the steel slag and granulated blast furnace slag wastes content is to enhance the stiffness of the road base materials and save materials and cost during road construction. Triaxial repeated load tests were performed on the unbound and lightly bound materials to measure their resilient modulus. The test results show important improvements in the bond strength between the contents of road base materials. This offers the prospect of using these materials in road base materials to reduce the use of primary aggregates and thus minimize the cost of roads and highways construction.展开更多
A New method,named atmospheric pressure plasma polishing,for the ultra-smooth machining of the silicon based materials is introduced.By inputting the CF4 gas into the atmospheric pressure plasma flame,high density rea...A New method,named atmospheric pressure plasma polishing,for the ultra-smooth machining of the silicon based materials is introduced.By inputting the CF4 gas into the atmospheric pressure plasma flame,high density reactive radicals will be generated,which will then react with the silicon based materials.The reaction product is the vaporization of the SiF4,which can be easily processed.In this way,the atomic scale material removal can be realized and the defect free ultra-smooth surface can be obtained.An experimental setup is built up,and the SiC polishing experiment is carried out.The AFM test result shows that the finished surface roughness (Ra) can be improved from 4.529 nm to 0.926 nm in 3 minutes.展开更多
The interaction of Si anions with Al sites during the hydration process was observed by NMR, IR and SEM to understand the reaction mechanism of the hydrates formation mixed with oil shale calcined at different tempera...The interaction of Si anions with Al sites during the hydration process was observed by NMR, IR and SEM to understand the reaction mechanism of the hydrates formation mixed with oil shale calcined at different temperatures. As the reaction progressed, the coordination of Al （Ⅳ, Ⅴ, and Ⅵ） changed almost completely to Ⅳ, when mixed with oil shale calcined at 700 ℃. However, when mixed with oil shale calcined at 400 ℃, some 6-coordination of Al still remained in the hydrates. Under the function of alkaline solutions, which were produced with the hydration of clinker, a certain amount of Si and Al atoms dissolved or hydrolyzed from aluminosilicate, formed geomonomers in solutions, and then polycondensed to form networks.展开更多
基金supported by the National Natural Science Foundation of China(No.52076070,No.52008166)the Natural Science Foundation of Hunan Province(No.2021JJ30256,No.2022JJ30139)。
文摘The seemingly useless reeds are prepared as thermal insulation materials,which not only meet the requirements of environmental sustainability but also enhance the added value of reeds,creating new economic benefits.The hydrophobicity of raw biomass surfaces leads to problems such as weak bonding strength and non-dense structure in the formed materials,as well as issues related to the residual insect infestations on the surface.In this study,reed straw was used as the raw material,and foamed geopolymer was used as the binder to prepare building insulation materials based reed.To improve the interfacial adhesion performance between reed straw and foamed geopolymer,a thermochemical modification method-thermal carbonization,was proposed.In this study,the mechanical properties and hydraulic properties of the studied materials with different degrees of surface thermal modification were tested,especially the fire resistance performance,and weathering resistance performance rarely found in published literature.When the surface thermal modification condition of reed straw was 250℃(30 min),the comprehensive performance of reed-based building insulation materials was the best,when the studied material density was 321.3 kg/m^(3);the compressive strength was 0.59 MPa;the thermal conductivity was 0.101 W/(m·K);the pH was 11.27;the moisture absorption rate was 25.1%,and the compressive strength loss rate in wet-dry cycles was 18.5%.In addition,it had excellent fire resistance performance and weathering resistance performance.This new material can be widely used to improve the thermal insulation of traditional buildings and as sandwich filler in prefabricated buildings,such as preparing insulating walls.
文摘Magnesium-based materials,including magnesium alloys,have emerged as a promising class of biodegradable materials with potential applications in cancer therapy due to their unique properties,including biocompatibility,biodegradability,and the ability to modulate the tumor microenvironment.The main degradation products of magnesium alloys are magnesium ions(Mg^(2+)),hydrogen(H_(2)),and magnesium hydroxide(Mg(OH)_(2)).Magnesium ions can regulate tumor growth and metastasis by mediating the inflammatory response and oxidative stress,maintaining genomic stability,and affecting the tumor microenvironment.Similarly,hydrogen can inhibit tumorigenesis through antioxidant and anti-inflammatory properties.Moreover,Mg(OH)_(2) can alter the pH of the microenvironment,impacting tumorigenesis.Biodegradable magnesium alloys serve various functions in clinical applications,including,but not limited to,bonefixation,coronary stents,and drug carriers.Nonetheless,the anti-tumor mechanism associated with magnesium-based materials has not been thoroughly investigated.This review provides a comprehensive overview of the current state of magnesium-based therapies for cancer.It highlights the mechanisms of action,identifies the challenges that must be addressed,and discusses prospects for oncological applications.
基金supported by National Natural Science Foundation of China(Grant Nos.32201499,32222057,and 22478142)Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2023A1515012519,2023A0505050114,and 2024B1515040004)+1 种基金National Key Research and Development Project(Grant No 2023YFE0109600)State Key Laboratory of Advanced Papermaking and Paper-based Materials(2024C02).
文摘The rapid development of portable electronics,wearable technologies,and healthcare monitoring systems necessitates the innovation of flexible energy storage systems.Considering environmental pollution and the depletion of fossil resources,the utilization of renewable resources to engineer advanced flexible materials has become especially crucial.Cellulose,the most abundant natural polymer,has emerged as a promising precursor for advanced functional materials due to its unique structure and properties.Typically,the easy processability,tunable chemical structure,self-assembly behavior,mechanical strength,and reinforcing capability enable its utilization as binder,substrate,hybrid electrode,separator,and electrolyte reservoir for flexible energy storage devices.This review comprehensively summarizes the design,fabrication,and mechanical and electrochemical performances of cellulose-based materials.The structure and unique properties of cellulose are first briefly introduced.Then,the construction of cellulose-based materials in the forms of 1D fibers/filaments,2D films/membranes,3D hydrogels and aerogels is discussed,and the merits of cellulose in these materials are emphasized.After that,the various advanced applications in supercapacitors,lithium-ion batteries,lithium-sulfur batteries,sodium-ion batteries,metal-air batteries,and Zn-ion batteries are presented in detail.Finally,an outlook of the potential challenges and future perspectives in advanced cellulose-based materials for flexible energy storage systems is discussed.
文摘Material growth and device fabrication of the first 1.3μm quantum well （QW） edge emitting laser diodes in China are reported. Through the optimization of the molecular beam epitaxy （MBE） growth conditions and the tuning of the indium and nitrogen composition of the GalnNAs QWs, the emission wavelengths of the QWs can be tuned to 1.3μm. Ridge geometry waveguide laser diodes are fabricated. The lasing wavelength is 1.3μm under continuous current injection at room temperature with threshold current of 1kA/cm^2 for the laser diode structures with the cleaved facet mirrors. The output light power over 30mW is obtained.
文摘In the field of optical interconnecting network and in super fast photonic computing system, the tree architecture and optical nonlinear materials can play a significant role. Nonlinear optical material may find important uses in optical switching. Optical switch using nonlinear material makes it possible for one optical signal to control and switch another optical signal through nonlinear interaction in a material. In this communication such materials have been successfully exploited to design an all-optical tree-net architecture, which can be utilized for time division multiplexing scheme in all-optical domain.
文摘Optics is a potential candidate in information, data, and image processing. In all-optical data and information processing, optics has been used as information carrying signal because of its inherent advantages of parallelism. Several optical methods are proposed in support of the above processing. In many algebraic, arithmetic, and image processing schemes fundamental logic and memory operations are conducted exploring all-optical devices. In this communication we report an all-optical matrix multiplication operation with non-linear material based switching circuit.
文摘The limitations in electronics in arithmetic, algebraic & logic processing are well known. Very high speed performance (above GHz) are not expected at all in conventional electronic mechanism. To achieve high speed performance we may think on the introduction of optics instead of electronics for information, processing and computing. Non-linear optical material is a successful candidate in this regard to play a major role in the optically controlled switching systems and therefore in all-optical parallel computation these materials can show a very good potential aspect. In this paper, we have proposed a new method of an optical half adder as well as full adder circuit for binary addition using non-linear and linear optical materials.
文摘In the field of optical computing and parallel information processing, several number systems have been used for different arithmetic and algebraic operations. Therefore an efficient conversion scheme from one number system to another is very important. Modified trinary number （MTN） has already taken a significant role towards carry and borrow free arithmetic operations. In this communication, we propose a tree-net architecture based all optical conversion scheme from binary number to its MTN form. Optical switch using nonlinear material （NLM） plays an important role.
文摘Lianli Copper Industry Group has drafted and implemented'4 industrial parks+10 industrial divisions'development strategy for constructing domestic&overseas'integrated,chain-based,and modernized industry'by relying on existing foundation during the'Thirteenth Five Year Plan'period.One of
基金supported by the National Key Research and Development Program of China(No.2018YFB1600100)the Fundamental Research Funds for the Central Universities(No.22120220177).
文摘Unbound Granular Materials(UGM)base is widely used in permeable pavement structure for infiltration,water storage,and load bearing.However,because of large void content,UGM base easily deforms under repeated loads,resulting in surface rutting and even reducing durability of permeable pavement.Thus,research on practical deformation prediction model of UGM base is necessary to improve the pavement structure design and evaluate the base layer construction quality.This study conducted laboratory and field tests to develop a deformation prediction model of UGM base under varied stress states.The deformation of UGM specimen was tested and analyzed through triaxial shear test and dynamic triaxial repeated load test,with varied confining pressures and Shear Stress-strength Ratios(SSR).A laboratory deformation model based on SSR was developed,and the linear relationship between total deformation and permanent deformation was obtained.The deformation of UGM base in situ was tested with Light Weight Deflectometer(LWD).The trends of laboratory deformation model and field test results were similar,and deformation prediction model for field was fitted.The values of parameters in permanent deformation model were recommended in varied stress ranges,based on mathematical analysis.Accordingly,the deformation of UGM base can be estimated.This study developed a model to estimate the permanent deformation of UGM based on deformation data from field and laboratory tests.
基金Natural Science Foundation of Shandong Province,Grant/Award Number:ZR2019MB019National Natural Science Foundation of China,Grant/Award Numbers:22075122,52071295Research Foundation for Talented Scholars of Linyi University,Grant/Award Number:Z6122010。
文摘The shortage of fresh water in the world has brought upon a serious crisis to human health and economic development.Solar‐driven interfacial photothermal conversion water evaporation including evaporating seawater,lake water,or river water has been recognized as an environmentally friendly process for obtaining clean water in a low‐cost way.However,water transport is restricted by itself by solar energy absorption capacity's limits,especially for finite evaporation rates and insufficient working life.Therefore,it is important to seek photothermal conversion materials that can efficiently absorb solar energy and reasonably design solar‐driven interfacial photothermal conversion water evaporation devices.This paper reviews the research progress of carbon‐based photothermal conversion materials and the mechanism for solar‐driven interfacial photothermal conversion water evaporation,as well as the summary of the design and development of the devices.Based on the research progress and achievements of photothermal conversion materials and devices in the fields of seawater desalination and photothermal electric energy generation in recent years,the challenges and opportunities faced by carbon‐based photothermal conversion materials and devices are discussed.The prospect of the practical application of solar‐driven interfacial photothermal conversion evaporation technology is foreseen,and theoretical guidance is provided for the further development of this technology.
基金This work was supported by the National High-Tech Research and Development Program of China (No.2003AA332020), the Nation-al Natural Science Foundation of China (No.50474002) and the Key Project of the Ministry of Education of China (No.104231).
文摘High performance aluminosilicate based cementitious materials were produced using calcined gangue as one of the major raw materials. The gangue was calcined at 500℃. The main constituent was calcined gangue, fly ash and slag, while alkali-silicate solutions were used as the diagenetic agent. The structure of gangue-containing aluminosilicate based cementitious materials was studied by the methods of IR, NMR and SEM. The results show that the mechanical properties are affected by the mass ratio between the gangue, slag and fly ash, the kind of activator and additional salt. For 28-day curing time, the compressive strength of the sample with a mass proportion of 2：1：1 （gangue： slag： fly ash） is 58.9 MPa, while the compressive strength of the sample containing 80wt% gangue can still be up to 52.3 MPa. The larger K^＋ favors the formation of large silicate oligomers with which AI（OH）4- prefers to bind. Therefore, in Na-K compounding activator solutions more oligomers exist which result in a stronger compressive strength of aluminosilicate-based cementitious materials than in the case of Na-containing activator. The reasons for this were found through IR and NMR analysis. Glauber＇s salt reduces the 3-day compressive strength of the paste, but increases its 7-day and 28-day compressive strengths.
基金Funded by the National Key Research Program(973 Program)(No.2013CB035901)the National Natural Science Foundation of China(No.51379163)
文摘Combined with DTG analysis, X-Ray diffraction analysis （XRD） and field emission scanning electron microscopy analysis （FSEM） affiliated with energy dispersive spectrometer analysis （EDS）, the early hydration and carbonation behavior of cement paste compacts incorporated with 30% of dolomite powder at low water to cement ratio （0.15） was investigated. The results showed that early carbonation curing was capable of developing rapid early strength. It is noted that the carbonation duration should be strictly controlled otherwise subsequent hydration might be hindered. Dolomite powder acted as nuclei of crystallization, resulting in acceleration of products formation and refinement of products crystal size. Therefore, as for cement-based material, it was found that early carbonation could reduce cement dosages to a large extent and promote rapid strength gain resulting from rapid formation of products, supplemental enhancement due to water release in the reaction of carbonation, and formation ofnanometer CaCO3 skeleton network at early age.
基金supported by the National Natural Science Foundation of China(No.51672109)Natural Science Foundation of Shandong Province for Excellent Young Scholars(No.ZR2016JL015)
文摘The electrode materials as the key component of supercapacitors have attracted considerable research interests, especially for nickel/cobalt based materials by virtue of their superior electrochemical performance with multiple oxidation states for richer redox reactions, abundant natural resources, lower prices and toxicity. There are many advanced electrodes based on the nickel/cobalt materials exploited for the application of supercapacitors, however, some controversial statements have induced some confusion. Herein, we refine the mechanism of energy storage for the nickel/cobalt based materials for supercapacitors and reclassify them into battery-type materials with the corresponding devices named as hybrid supercapacitors.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11474248,61176127,61006085,61274013 and 61306013the Key Program for International S&T Cooperation Projects of China under Grant No 2011DFA62380the Ph.D. Programs Foundation of the Ministry of Education of China under Grant No 20105303120002
文摘High lattice match growth of InAsSb based materials on GaSb substrates is demonstrated. The present results indicate that a stable substrate temperature and the optimal flux ratios are of critical importance in achieving a homogeneous InAsSb based material composition throughout the growth period. The quality of these epilayers is assessed using a high-resolution x-ray diffraction and atomic force microscope. The mismatch between the GaSb substrate and InAsSb alloy achieves almost zero, and the rms surface roughness of InAsSb alloy achieves around 1.7A over an area of 28μm × 28μm. At the same time, the mismatches between GaSb and InAs/InAs0.73Sb0.27 superlattices （SLs） achieve approximately 100 arcsec （75 periods） and zero （300 periods）, with the surface rms roughnesses of InAs/InAs0.73Sb0.27 SLs around 1.8 A （75 periods） and 2.1A （300 periods） over an area of 20 μm×20 μm, respectively. After fabrication and characterization of the devices, the dynamic resistance of the n-barrier-n InAsSb photodetector near zero bias is of the order of 10^6Ω·cm^2. At 77K, the positive-intrinsic-negative photodetectors are demonstrated in InAsSb and InAs/InAsSb SL （75 periods） materials, exhibiting fifty-percent cutoff wavelengths of 3.8μm and 5.1μm, respectively.
文摘The properties of road base course materials of granular soils stabilized by AGS granular soil stabilizing cement were studied.The AGS cement has an expansibility to a certain degree,so the dry shrinkage of AGS cement paste and AGS stabilized granular is much lower than that of Portland slag cement.AGS has a good suitability to granular soils.Granular soils stabilized by AGS have a much higher strength than that of soils stabilized by P S cement.The same strength can be reached with 20% reduction of cement dosage for AGS cement.And their elastic and resilient modulus are similar,but the former has a much higher tensile splitting strength,so the AGS stabilized granular has a much better anti-cracking performance than that of the P S stabilized granular.The reduced value of the strength and the density with the retard time for the granular soils stabilized by AGS is lower than that for P S cement.
文摘ZnFe 2O 4 and ZnFe 2O 4 based materials were tested to obtain the electrical conductivity and corrosion resistance in melting bath for aluminum electrolysis. The results proved that adequate additives, such as Ni 2O 3 CuO, Cu, ZnO and CeO 2 would increase the electrical conductivity, and the ZnFe 2O 4 based anodes with these additives were of good corrosion resistance. The current density on anode, the mole ratio of NaF/AlF 3 (MR) and the content of alumina in the bath effect the anode corrosion rate in different way.
文摘The paper presents laboratory test results on hydraulically bound road base materials containing high volume of steel slag and blast furnace slag waste dusts compared with control mixtures. These mixtures contain higher levels of （4mm-0.0 mm） dust, than would be the case in standard un bound road base mixtures. The combined influence of the steel slag and granulated blast furnace slag wastes content is to enhance the stiffness of the road base materials and save materials and cost during road construction. Triaxial repeated load tests were performed on the unbound and lightly bound materials to measure their resilient modulus. The test results show important improvements in the bond strength between the contents of road base materials. This offers the prospect of using these materials in road base materials to reduce the use of primary aggregates and thus minimize the cost of roads and highways construction.
文摘A New method,named atmospheric pressure plasma polishing,for the ultra-smooth machining of the silicon based materials is introduced.By inputting the CF4 gas into the atmospheric pressure plasma flame,high density reactive radicals will be generated,which will then react with the silicon based materials.The reaction product is the vaporization of the SiF4,which can be easily processed.In this way,the atomic scale material removal can be realized and the defect free ultra-smooth surface can be obtained.An experimental setup is built up,and the SiC polishing experiment is carried out.The AFM test result shows that the finished surface roughness (Ra) can be improved from 4.529 nm to 0.926 nm in 3 minutes.
基金Supported by the National Science and Technology (2006BAE03A11)the National Natural Science Foundation of China(50674062)
文摘The interaction of Si anions with Al sites during the hydration process was observed by NMR, IR and SEM to understand the reaction mechanism of the hydrates formation mixed with oil shale calcined at different temperatures. As the reaction progressed, the coordination of Al （Ⅳ, Ⅴ, and Ⅵ） changed almost completely to Ⅳ, when mixed with oil shale calcined at 700 ℃. However, when mixed with oil shale calcined at 400 ℃, some 6-coordination of Al still remained in the hydrates. Under the function of alkaline solutions, which were produced with the hydration of clinker, a certain amount of Si and Al atoms dissolved or hydrolyzed from aluminosilicate, formed geomonomers in solutions, and then polycondensed to form networks.
