The material flow in friction stir welded 2014 Al alloy has been investigated using a marker insert technique （MIT）. Results of the flow visualization show that the material flow is asymmetrical during the friction ...The material flow in friction stir welded 2014 Al alloy has been investigated using a marker insert technique （MIT）. Results of the flow visualization show that the material flow is asymmetrical during the friction stir welding （FSW） process and there are also significant differences in the flow patterns observed on advancing side and retreating side. On advancing side, some material transport forward and some move backward, but on retreating side, material only transport backward. At the top surface of the weld, significant material transport forward due to the action of the rotating tool shoulder. Combining the data from all the markers, a three-dituensional flow visualization, similar to the 3D image reconstruction technique, was obtained. The three-dimensional plot gives the tendency chart of material flow in friction stir welding process and from the plot it can be seen that there is a vertical, circular motion around the longitudinal axis of the weld. On the advancing side of the weld, the material is pushed downward but on the retreating side, the material is pushed toward the crown of the weld. The net result of the two relative motions in both side of the advancing and the retreating is that a circular motion comes into being. Comparatively, the material flow around the longitudinal axis is a secondary motion.展开更多
A rice heading-date-related mutant was isolated from a ^60Co-y-ray-induced mutation pool of Zhejing 22, a conventional japonica cultivar in Zhejiang Province, China. The mutant was characterized by a delayed heading d...A rice heading-date-related mutant was isolated from a ^60Co-y-ray-induced mutation pool of Zhejing 22, a conventional japonica cultivar in Zhejiang Province, China. The mutant was characterized by a delayed heading date of almost 20 d longer than the wild type plant. Genetic analysis revealed that the mutation was controlled by a single nuclear-encoded recessive gene that was designed as HD（t） （heading date tentatively）. To isolate the HD（t） gene, a map-based cloning approach was employed using 479 F2 mutant individual plants derived from the cross between the hd（t） mutant （japonica） x Zhenshan 97 （indica）. Finally, the HD（t） gene was mapped to an approximate 53 kb region between the insertion and deletion （InDel） markers of 10-61W and 10-66W on chromosome 10. According to the genome sequence of Nipponbare, the target region contains 11 annotated genes. It is helpful for future cloning of HD（t） gene based on this fine mapping results.展开更多
The eastern Himalayan region of Northeast （NE） India is home to a large number of indigenous rice varieties, which are traditionally classified as Oryza sativa subspecies indica, japonica or intermediate types. The ...The eastern Himalayan region of Northeast （NE） India is home to a large number of indigenous rice varieties, which are traditionally classified as Oryza sativa subspecies indica, japonica or intermediate types. The classification based on traditional Cheng’s index is often inconclusive due to phenotypic plasticity of morphological characters, which are influenced by environmental conditions. We used molecular markers specific for indica and japonica subspecies to assess the degree of genetic relatedness of indigenous rice varieties in NE India. The results revealed that majority of upland （jum） and glutinous rice varieties, traditionally considered as japonica, were genetically close to the subspecies indica. All varieties of boro ecotype were found to be indica type, and only a few varieties cultivated in lowland and upland areas were japonica type. Some of the lowland varieties of the sali ecotype were intermediate between indica and japonica, and they showed a closer genetic affinity to O. rufipogon.展开更多
文摘The material flow in friction stir welded 2014 Al alloy has been investigated using a marker insert technique （MIT）. Results of the flow visualization show that the material flow is asymmetrical during the friction stir welding （FSW） process and there are also significant differences in the flow patterns observed on advancing side and retreating side. On advancing side, some material transport forward and some move backward, but on retreating side, material only transport backward. At the top surface of the weld, significant material transport forward due to the action of the rotating tool shoulder. Combining the data from all the markers, a three-dituensional flow visualization, similar to the 3D image reconstruction technique, was obtained. The three-dimensional plot gives the tendency chart of material flow in friction stir welding process and from the plot it can be seen that there is a vertical, circular motion around the longitudinal axis of the weld. On the advancing side of the weld, the material is pushed downward but on the retreating side, the material is pushed toward the crown of the weld. The net result of the two relative motions in both side of the advancing and the retreating is that a circular motion comes into being. Comparatively, the material flow around the longitudinal axis is a secondary motion.
基金supported by the Chinese Ministry of Agriculture(Grant Nos.200803034 and 2011ZX08001001)the Zhejiang Provincial and the National Natural Science Foundation of China(Grant Nos.Y3080361 and 31071207)+2 种基金the Science and Technology Department of Zhejiang Province,China(Grant No.2004C12020)the Special Fund for Agro-scientific Research in the Public Interest(Grant No.201103007)the Special Fund of Zhejiang Academy of Agricultural Science,China
文摘A rice heading-date-related mutant was isolated from a ^60Co-y-ray-induced mutation pool of Zhejing 22, a conventional japonica cultivar in Zhejiang Province, China. The mutant was characterized by a delayed heading date of almost 20 d longer than the wild type plant. Genetic analysis revealed that the mutation was controlled by a single nuclear-encoded recessive gene that was designed as HD（t） （heading date tentatively）. To isolate the HD（t） gene, a map-based cloning approach was employed using 479 F2 mutant individual plants derived from the cross between the hd（t） mutant （japonica） x Zhenshan 97 （indica）. Finally, the HD（t） gene was mapped to an approximate 53 kb region between the insertion and deletion （InDel） markers of 10-61W and 10-66W on chromosome 10. According to the genome sequence of Nipponbare, the target region contains 11 annotated genes. It is helpful for future cloning of HD（t） gene based on this fine mapping results.
基金financially supported by NSERC-Canada,FRQNT and Concordia University
文摘The eastern Himalayan region of Northeast （NE） India is home to a large number of indigenous rice varieties, which are traditionally classified as Oryza sativa subspecies indica, japonica or intermediate types. The classification based on traditional Cheng’s index is often inconclusive due to phenotypic plasticity of morphological characters, which are influenced by environmental conditions. We used molecular markers specific for indica and japonica subspecies to assess the degree of genetic relatedness of indigenous rice varieties in NE India. The results revealed that majority of upland （jum） and glutinous rice varieties, traditionally considered as japonica, were genetically close to the subspecies indica. All varieties of boro ecotype were found to be indica type, and only a few varieties cultivated in lowland and upland areas were japonica type. Some of the lowland varieties of the sali ecotype were intermediate between indica and japonica, and they showed a closer genetic affinity to O. rufipogon.
