Hydrogen partial pressure is an important parameter to calculate hydrogen concentration levels in molten aluminum alloy. A new dynamic method for measuring hydrogen partial pressure in molten aluminum alloy is studied...Hydrogen partial pressure is an important parameter to calculate hydrogen concentration levels in molten aluminum alloy. A new dynamic method for measuring hydrogen partial pressure in molten aluminum alloy is studied. Dynamic and rapid measurement is realized through changing the volume of the vacuum chamber and calculating the pressure difference ΔP between the theoretical and measured pressures in the vacuum chamber. Positive ΔP indicates hydrogen transmits from melt to vacuum chamber and negative ΔP means the reverse. When ΔP is equal to zero, hydrogen transmitted from both sides reached a state of dynamical equilibrium and the pressure in the vacuum chamber is equal to the hydrogen partial pressure in the molten aluminum alloy. Compared with other existing measuring methods, the new method can significantly shorten the testing time and reduce measuring cost.展开更多
An accurate method has been developed to calculate and measure the luminance of light-emitting diode (LED). A novel, simple-structured and high-precision circuitry was designed, which has been applied to the developme...An accurate method has been developed to calculate and measure the luminance of light-emitting diode (LED). A novel, simple-structured and high-precision circuitry was designed, which has been applied to the development of a low-cost threshold static automated perimeter. Round LEDs of 2 mm in diameter were used as stimuli. A logarithmic scale is used to express the differential light sensitivity, where 0 dB represents the brightest stimulus that corresponds to 1 000 asb. The LED radiant power was measured and its equivalent luminance was calculated by the derived equations. The schematics of the system is given, together with a novel circuitry for selecting stimulus point and its luminance. Initial clinical trial results were promising,which led to a further development of a commercial product.展开更多
AIM:To investigate the luminal esophageal temperature(LET) at the time of delivery of energy for pulmonary vein isolation(PVI).METHODS:This study included a total of 110 patients with atrial fibrillation who underwent...AIM:To investigate the luminal esophageal temperature(LET) at the time of delivery of energy for pulmonary vein isolation(PVI).METHODS:This study included a total of 110 patients with atrial fibrillation who underwent their first PVI procedure in our laboratory between March 2010 and February 2011.The LET was monitored in all patients.We measured the number of times that LET reached the cut-off temperature,the time when LET reached the cut-off temperature,the maximum temperature(T max) of the LET,and the time to return to the original preenergy delivery temperature once the delivery of energy was stopped.RESULTS:Seventy-eight patients reached the cut-off temperature.It took 6 s at the shortest time for the LET to reach the cut-off temperature,and 216.5 ± 102.9 s for the temperature to return to the level before the de-livery of energy.Some patients experienced a transient drop in the LET(TDLET) just before energy delivery.Ablation at these sites always produced a rise to the LET cut-off temperature.TDLET was not observed at sites where the LET did not rise.Thus,the TDLET before the energy delivery was useful to distinguish a high risk of esophageal injury before delivery of energy.CONCLUSION:Sites with a TDLET before energy delivery should be ablated with great caution or,perhaps,not at all.展开更多
The machining process remains relevant for manufacturing high-quality and high-precision parts,which can be found in industries such as aerospace and aeronautical,with many produced by turning,drilling,and milling pro...The machining process remains relevant for manufacturing high-quality and high-precision parts,which can be found in industries such as aerospace and aeronautical,with many produced by turning,drilling,and milling processes.Monitoring and analyzing tool wear during these processes is crucial to assess the tool’s life and optimize the tool’s performance under study;as such,standards detail procedures to measure and assess tool wear for various tools.Measuring wear in machining tools can be time-consuming,as the process is usually manual,requiring human interaction and judgment.In the present work,an automated offline flank wear measurement algorithm was developed in Python.The algorithm measures the flank wear of coated end-mills and slot drills from Scanning Electron Microscopy(SEM)images,according to the ISO 8688 standard,following the same wear measurement procedure.SEM images acquired with different magnifications and tools with varying machining parameters were analyzed using the developed algorithm.The flank wear measurements were then compared to the manually obtained,achieving relative errors for the most common magnifications of around 2.5%.Higher magnifications were also tested,yielding a maximum relative error of 13.4%.The algorithm can measure batches of images quickly on an ordinary personal computer,analyzing and measuring a 10-image batch in around 30 s,a process that would require around 30 min when performed manually by a skilled operator.Therefore,it can be a reliable alternative to measuring flank wear on many tools from SEM images,with the possibility of being adjusted for other wear measurements on different kinds of tools and different image types,for example,on images obtained by optical microscopy.展开更多
The presence of residual stresses in materials or engineering structures can significantly influence their mechanical per-formance.Accurate measurement of residual stresses is of great importance to ensure their in-se...The presence of residual stresses in materials or engineering structures can significantly influence their mechanical per-formance.Accurate measurement of residual stresses is of great importance to ensure their in-service reliability.Although numerous instrumented indentation methods have been proposed to evaluate residual stresses,the majority of them require a stress-free reference sample as a comparison benchmark,thereby limiting their applicability in scenarios where obtaining stress-free reference samples is challenging.In this work,through a number of finite element simulations,it was found that the loading exponent of the loading load-depth curve and the recovered depth during unloading are insensitive to residual stresses.The loading curve of the stress-free specimen was virtually reconstructed using such stress-insensitive parameters extracted from the load-depth curves of the stressed state,thus eliminating the requirement for stress-free reference samples.The residual stress was then correlated with the fractional change in loading work between stressed and stress-free loading curves through dimensional analysis and finite element simulations.Based on this correlation,an instrumented sharp indentation method for measuring equibiaxial residual stress without requiring a stress-free specimen was established.Both numerical and experimental verifications were carried out to demonstrate the accuracy and reliability of the newly proposed method.The maximum relative error and absolute error in measured residual stresses are typically within±20%and±20 MPa,respectively.展开更多
Traditional automated guided vehicle(AGV)primarily relies on scheduling systems to manage warehouse locations and execute picking or placing tasks on fixedheight pallets.However,these conventional systems are illsuite...Traditional automated guided vehicle(AGV)primarily relies on scheduling systems to manage warehouse locations and execute picking or placing tasks on fixedheight pallets.However,these conventional systems are illsuited for scenarios involving variable heights,such as vehicle loading and unloading or the complex stacking of soft packages.To address the challenges of AGV endeffector operations in nonfixed height scenarios,this paper proposes an innovative solution leveraging lowcost depth camera sensors.By capturing image and depth data,and integrating deep learning,image processing,and spatial attitude calculation techniques,the method accurately determines the position of the endeffector center point relative to the upper plane of the fork.The approach effectively resolves a key issue in AGV operations within intelligent logistics scenarios that lack fixed heights.The proposed algorithm is deployed on a domestic embedded,lowcost ARM chip controller,and extensive experiments are conducted on a real AGV equipped with multiple stacked vehicles and nonstandard vehicles.The experimental results demonstrate that for diverse vehicles with different heights,the measurement error can be maintained within±10 mm,satisfying the requirements for highprecision measurement.The height measurement method developed in the paper not only enhances the AGV’s adaptability in nonfixed height scenarios but also significantly broadens its application potential across various industries.展开更多
Single-cell biomechanics and electrophysiology measuring tools have transformed biological research over the last few decades,which enabling a comprehensive and nuanced understanding of cellular behavior and function....Single-cell biomechanics and electrophysiology measuring tools have transformed biological research over the last few decades,which enabling a comprehensive and nuanced understanding of cellular behavior and function.Despite their high-quality information content,these single-cell measuring techniques suffer from laborious manual processing by highly skilled workers and extremely low throughput(tens of cells per day).Recently,numerous researchers have automated the measurement of cell mechanical and electrical signals through robotic localization and control processes.While these efforts have demonstrated promising progress,critical challenges persist,including human dependency,learning complexity,in-situ measurement,and multidimensional signal acquisition.To identify key limitations and highlight emerging opportunities for innovation,in this review,we comprehensively summarize the key steps of robotic technologies in single-cell biomechanics and electrophysiology.We also discussed the prospects and challenges of robotics and automation in biological research.By bridging gaps between engineering,biology,and data science,this work aims to stimulate interdisciplinary research and accelerate the translation of robotic single-cell technologies into practical applications in the life sciences and medical fields.展开更多
[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of ...[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.展开更多
Seismic resilience(SR)has emerged as a critical focus in earthquake engineering to evaluate the ability of structures to endure,recover from,and adapt to seismic events.This study presents an entropy-based multicriter...Seismic resilience(SR)has emerged as a critical focus in earthquake engineering to evaluate the ability of structures to endure,recover from,and adapt to seismic events.This study presents an entropy-based multicriteria approach for selecting optimal intensity measures(IMs)to assess SR of structures.Eight representative IMs,derived from time histories and response spectrum are evaluated.Incremental dynamic analysis is con-ducted on a reinforced concrete structure,using engineering demand parameters such as the maximum interstory drift and floor acceleration to generate fragility curves via a probabilistic seismic demand model.The optimal IMs are identified through a multi-criteria decision-making process,with scores calculated using the entropy weight method to incorporate factors such as efficiency,proficiency,and uncertainty based on infor-mation entropy.An effective SR framework is derived from fragility results.The findings indicate that peak ground velocity and spectral IMs are the most effective,while energy-related IMs underestimate SR.The study highlights the importance of optimizing IMs for more accurate seismic resilience assessments.The proposed entropy-based multi-criteria approach is shown to be both reliable and effective for selecting optimal IMs in this context.展开更多
Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for th...Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for thermal imaging and transport research.Here,we introduce an approach to measure nanoscale thermal resistance using in situ inelastic scanning transmission electron microscopy.By constructing unidirectional heating flux with controlled temperature gradients and analyzing electron energy-loss/gain signals under optimized acquisition conditions,nanometer-resolution in mapping phonon apparent temperature is achieved.Thus,interfacial thermal resistance is determined by calculating the ratio of interfacial temperature difference to bulk temperature gradient.This methodology enables direct measurement of thermal transport properties for atomic-scale structural features(e.g.,defects and heterointerfaces),resolving critical structure-performance relationships,providing a useful tool for investigating thermal phenomena at the(sub-)nanoscale.展开更多
As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing pl...As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.展开更多
Long-span bridges are usually constructed over waterways that involve substantial ship traffic,resulting in a risk of collisions between the bridge girders and over-height ships.The consequences of this can be severe ...Long-span bridges are usually constructed over waterways that involve substantial ship traffic,resulting in a risk of collisions between the bridge girders and over-height ships.The consequences of this can be severe structural damage or even collapse.Accurate measurement of ship dimensions is an effective way to monitor approaching over-height ships and avoid collisions.However,the performance of current techniques for estimating the size of moving objects can be undermined by large sensor-to-object distance,limiting their applicability.In this study,we propose a digital twin-assisted ship size measurement framework that can overcome such limitations through a predictive model and virtual-to-real-world transfer learning.Specifically,a 3D synthetic environment is first established to generate a synthetic dataset,which includes ship images,positions,and dimensions.Then the pixel information and spatial coordinates of ships are adopted as regressors,and ship dimensions are selected as the output variables to pre-train deep learning models using the generated dataset.Coordinate system transformations are applied to address dataset bias between the simulated world and real-world,as well as improve the model’s generalization.The pre-trained models are compared using supervised virtual-to-real-world transfer learning to select the version with optimal real-world performance.The mean absolute percentage error is only 3.74%across varying camera-to-ship distances,which demonstrates that the proposed method is effective for over-limit ship monitoring.展开更多
In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-pin...In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.展开更多
A new multi-detector array named HALIMA(Hybrid Array for LIfetime MeAsurement)has been developed at Lanzhou for nuclear structure studies in fission.The array comprises eight BGO-shielded High-Purity Germanium detecto...A new multi-detector array named HALIMA(Hybrid Array for LIfetime MeAsurement)has been developed at Lanzhou for nuclear structure studies in fission.The array comprises eight BGO-shielded High-Purity Germanium detectors and twenty fast Ce-doped Lanthanum Bromide[LaBr_(3)(Ce)]detectors shielded with CsI(Tl).HALIMA is further complemented by two ancillary detector systems:fission fragment(FF)detectors and β detectors.This configuration enables precise sub-nanosecond lifetime measurements using the fourfold FF/β-Ge-LaBr_(3)(Ce)-LaBr_(3)(Ce)coincidence technique.The performance and specifications of the detectors,associated electronics,and the data acquisition system are presented in detail.The advantage of FF selectivity is emphasized,which significantly enhances sensitivity to specific fission channels.Using this approach,the lifetimes of the nuclear excited states populated in the spontaneous fission of^(252)Cf were measured,showing good agreement with the established literature values.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
This article introduces a surface measurement system which is able to take a measurement in an extremely short period of less than 2 milliseconds. It is composed of two cameras together with a specifically designed pr...This article introduces a surface measurement system which is able to take a measurement in an extremely short period of less than 2 milliseconds. It is composed of two cameras together with a specifically designed projector that projects an instantaneous random image pattern onto the objective surface. With the aid of the projected pattern, a match of image with corresponding sub-pixel is steadily established and a cluster of dense 3D points is obtained at the same time. A detailed discussion about the des...展开更多
A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine. The temperature at the measuring point is converted into correspon...A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine. The temperature at the measuring point is converted into corresponding voltage signal by the thermo-couple first. Then after the V/F stage, the voltage signal is converted into the frequency signal to drive the infrared light-emitting diode to transmit infrared pulses. At the receiver end, a photosensitive audion receives the infrared pulses. After conversion, the voltage recorded by the receiver stands for the magnitude of temperature at the measuring point. Test results of the system indicate that the system is practical and the system can perform multipoint looping temperature measurements for the piston.展开更多
An effective method was proposed to establish the continuous cooling transformation（CCT） diagrams of aluminum alloys using in situ voltage measurement.The voltage change of samples with predefined dimension was reco...An effective method was proposed to establish the continuous cooling transformation（CCT） diagrams of aluminum alloys using in situ voltage measurement.The voltage change of samples with predefined dimension was recorded under the constant current state during continuous cooling.Solutionizing time,together with starting and finishing temperatures of phase transformation of the alloy can be obtained from relationships of voltage vs time and temperature.A critical cooling rate without detectable phase transition during continuous cooling can be determined.Continuous cooling transformation diagrams of tested samples can be established conveniently based on these results.Microstructure observation and differential scanning calorimetry（DSC） testing were applied to verify the reliability of continuous cooling transformation diagram.展开更多
Dual-frequency and multi-polarization spaceborne rain and cloud measuring radar is the inevitable trend of remote sensing techniques.Techniques of new generation dual-frequency and multi-polarization spaceborne rain a...Dual-frequency and multi-polarization spaceborne rain and cloud measuring radar is the inevitable trend of remote sensing techniques.Techniques of new generation dual-frequency and multi-polarization spaceborne rain and cloud measuring radar are studied systematically.Radar block diagram and main parameters are presented.Antenna subsystem scheme is analyzed and antenna parameters are proposed.Central electronic device subsystem scheme is given and data rate of spaceborne radar is calculated.This paper is a meaningful try for carrying out spaceborne rain and cloud measuring radar design,acting as a reference to Chinese spaceborne rain and cloud measuring radar design and production in future.展开更多
文摘Hydrogen partial pressure is an important parameter to calculate hydrogen concentration levels in molten aluminum alloy. A new dynamic method for measuring hydrogen partial pressure in molten aluminum alloy is studied. Dynamic and rapid measurement is realized through changing the volume of the vacuum chamber and calculating the pressure difference ΔP between the theoretical and measured pressures in the vacuum chamber. Positive ΔP indicates hydrogen transmits from melt to vacuum chamber and negative ΔP means the reverse. When ΔP is equal to zero, hydrogen transmitted from both sides reached a state of dynamical equilibrium and the pressure in the vacuum chamber is equal to the hydrogen partial pressure in the molten aluminum alloy. Compared with other existing measuring methods, the new method can significantly shorten the testing time and reduce measuring cost.
文摘An accurate method has been developed to calculate and measure the luminance of light-emitting diode (LED). A novel, simple-structured and high-precision circuitry was designed, which has been applied to the development of a low-cost threshold static automated perimeter. Round LEDs of 2 mm in diameter were used as stimuli. A logarithmic scale is used to express the differential light sensitivity, where 0 dB represents the brightest stimulus that corresponds to 1 000 asb. The LED radiant power was measured and its equivalent luminance was calculated by the derived equations. The schematics of the system is given, together with a novel circuitry for selecting stimulus point and its luminance. Initial clinical trial results were promising,which led to a further development of a commercial product.
文摘AIM:To investigate the luminal esophageal temperature(LET) at the time of delivery of energy for pulmonary vein isolation(PVI).METHODS:This study included a total of 110 patients with atrial fibrillation who underwent their first PVI procedure in our laboratory between March 2010 and February 2011.The LET was monitored in all patients.We measured the number of times that LET reached the cut-off temperature,the time when LET reached the cut-off temperature,the maximum temperature(T max) of the LET,and the time to return to the original preenergy delivery temperature once the delivery of energy was stopped.RESULTS:Seventy-eight patients reached the cut-off temperature.It took 6 s at the shortest time for the LET to reach the cut-off temperature,and 216.5 ± 102.9 s for the temperature to return to the level before the de-livery of energy.Some patients experienced a transient drop in the LET(TDLET) just before energy delivery.Ablation at these sites always produced a rise to the LET cut-off temperature.TDLET was not observed at sites where the LET did not rise.Thus,the TDLET before the energy delivery was useful to distinguish a high risk of esophageal injury before delivery of energy.CONCLUSION:Sites with a TDLET before energy delivery should be ablated with great caution or,perhaps,not at all.
文摘The machining process remains relevant for manufacturing high-quality and high-precision parts,which can be found in industries such as aerospace and aeronautical,with many produced by turning,drilling,and milling processes.Monitoring and analyzing tool wear during these processes is crucial to assess the tool’s life and optimize the tool’s performance under study;as such,standards detail procedures to measure and assess tool wear for various tools.Measuring wear in machining tools can be time-consuming,as the process is usually manual,requiring human interaction and judgment.In the present work,an automated offline flank wear measurement algorithm was developed in Python.The algorithm measures the flank wear of coated end-mills and slot drills from Scanning Electron Microscopy(SEM)images,according to the ISO 8688 standard,following the same wear measurement procedure.SEM images acquired with different magnifications and tools with varying machining parameters were analyzed using the developed algorithm.The flank wear measurements were then compared to the manually obtained,achieving relative errors for the most common magnifications of around 2.5%.Higher magnifications were also tested,yielding a maximum relative error of 13.4%.The algorithm can measure batches of images quickly on an ordinary personal computer,analyzing and measuring a 10-image batch in around 30 s,a process that would require around 30 min when performed manually by a skilled operator.Therefore,it can be a reliable alternative to measuring flank wear on many tools from SEM images,with the possibility of being adjusted for other wear measurements on different kinds of tools and different image types,for example,on images obtained by optical microscopy.
基金support from the National Natural Science Foundation of China(Grant Nos.12172332,11727803 and 12072009)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LZ23A020007)the Fundamental Research Funds for the Provincial Universities of Zhejiang(Grant No.RF-C2022003).
文摘The presence of residual stresses in materials or engineering structures can significantly influence their mechanical per-formance.Accurate measurement of residual stresses is of great importance to ensure their in-service reliability.Although numerous instrumented indentation methods have been proposed to evaluate residual stresses,the majority of them require a stress-free reference sample as a comparison benchmark,thereby limiting their applicability in scenarios where obtaining stress-free reference samples is challenging.In this work,through a number of finite element simulations,it was found that the loading exponent of the loading load-depth curve and the recovered depth during unloading are insensitive to residual stresses.The loading curve of the stress-free specimen was virtually reconstructed using such stress-insensitive parameters extracted from the load-depth curves of the stressed state,thus eliminating the requirement for stress-free reference samples.The residual stress was then correlated with the fractional change in loading work between stressed and stress-free loading curves through dimensional analysis and finite element simulations.Based on this correlation,an instrumented sharp indentation method for measuring equibiaxial residual stress without requiring a stress-free specimen was established.Both numerical and experimental verifications were carried out to demonstrate the accuracy and reliability of the newly proposed method.The maximum relative error and absolute error in measured residual stresses are typically within±20%and±20 MPa,respectively.
基金Supported by the Key Research and Development Program of Anhui Province(No.201904a05020035)the Postdoctoral Research Initiative of Anhui Province(No.2024B804)the Hefei City Key Technology Research and Development‘Ranking’(No.2023SGJ017).
文摘Traditional automated guided vehicle(AGV)primarily relies on scheduling systems to manage warehouse locations and execute picking or placing tasks on fixedheight pallets.However,these conventional systems are illsuited for scenarios involving variable heights,such as vehicle loading and unloading or the complex stacking of soft packages.To address the challenges of AGV endeffector operations in nonfixed height scenarios,this paper proposes an innovative solution leveraging lowcost depth camera sensors.By capturing image and depth data,and integrating deep learning,image processing,and spatial attitude calculation techniques,the method accurately determines the position of the endeffector center point relative to the upper plane of the fork.The approach effectively resolves a key issue in AGV operations within intelligent logistics scenarios that lack fixed heights.The proposed algorithm is deployed on a domestic embedded,lowcost ARM chip controller,and extensive experiments are conducted on a real AGV equipped with multiple stacked vehicles and nonstandard vehicles.The experimental results demonstrate that for diverse vehicles with different heights,the measurement error can be maintained within±10 mm,satisfying the requirements for highprecision measurement.The height measurement method developed in the paper not only enhances the AGV’s adaptability in nonfixed height scenarios but also significantly broadens its application potential across various industries.
基金the National Natural Science Foundation of China[62525301,62127811,62433019]the New Cornerstone Science Foundation through the XPLORER PRIZEthe financial support by the China Postdoctoral Science Foundation[GZB20240797].
文摘Single-cell biomechanics and electrophysiology measuring tools have transformed biological research over the last few decades,which enabling a comprehensive and nuanced understanding of cellular behavior and function.Despite their high-quality information content,these single-cell measuring techniques suffer from laborious manual processing by highly skilled workers and extremely low throughput(tens of cells per day).Recently,numerous researchers have automated the measurement of cell mechanical and electrical signals through robotic localization and control processes.While these efforts have demonstrated promising progress,critical challenges persist,including human dependency,learning complexity,in-situ measurement,and multidimensional signal acquisition.To identify key limitations and highlight emerging opportunities for innovation,in this review,we comprehensively summarize the key steps of robotic technologies in single-cell biomechanics and electrophysiology.We also discussed the prospects and challenges of robotics and automation in biological research.By bridging gaps between engineering,biology,and data science,this work aims to stimulate interdisciplinary research and accelerate the translation of robotic single-cell technologies into practical applications in the life sciences and medical fields.
文摘[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.
基金partly supported by Engineering Partners Inter-national,LLC,Richfield,MN 55423(PC13803,482842-58309).
文摘Seismic resilience(SR)has emerged as a critical focus in earthquake engineering to evaluate the ability of structures to endure,recover from,and adapt to seismic events.This study presents an entropy-based multicriteria approach for selecting optimal intensity measures(IMs)to assess SR of structures.Eight representative IMs,derived from time histories and response spectrum are evaluated.Incremental dynamic analysis is con-ducted on a reinforced concrete structure,using engineering demand parameters such as the maximum interstory drift and floor acceleration to generate fragility curves via a probabilistic seismic demand model.The optimal IMs are identified through a multi-criteria decision-making process,with scores calculated using the entropy weight method to incorporate factors such as efficiency,proficiency,and uncertainty based on infor-mation entropy.An effective SR framework is derived from fragility results.The findings indicate that peak ground velocity and spectral IMs are the most effective,while energy-related IMs underestimate SR.The study highlights the importance of optimizing IMs for more accurate seismic resilience assessments.The proposed entropy-based multi-criteria approach is shown to be both reliable and effective for selecting optimal IMs in this context.
基金supported by the National Natural Science Foundation of China(Grant No.52125307)the National Key R&D Program of China(Grant No.2021YFB3501500)the support from the New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for thermal imaging and transport research.Here,we introduce an approach to measure nanoscale thermal resistance using in situ inelastic scanning transmission electron microscopy.By constructing unidirectional heating flux with controlled temperature gradients and analyzing electron energy-loss/gain signals under optimized acquisition conditions,nanometer-resolution in mapping phonon apparent temperature is achieved.Thus,interfacial thermal resistance is determined by calculating the ratio of interfacial temperature difference to bulk temperature gradient.This methodology enables direct measurement of thermal transport properties for atomic-scale structural features(e.g.,defects and heterointerfaces),resolving critical structure-performance relationships,providing a useful tool for investigating thermal phenomena at the(sub-)nanoscale.
基金supported by the Bureau of Frontier Sciences and Basic Research,Chinese Academy of Sciences(Grant No.QYJ-2025-0103)the National Natural Science Foundation of China(Grant Nos.42441834,42241105,42441825,and 42203048)the Key Research Program of the Institute of Geology and Geophysics,Chinese Academy of Sciences(Grant No.IGGCAS-202401).
文摘As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.
基金supported by the National Natural Science Foundation of China(Nos.52338011 and 52108274)the Start-up Research Fund of Southeast University(No.RF1028624058),Chinasupport from the SEU Innovation Capability Enhancement Plan for Doctoral Students(No.CXJH_SEU 26112),China.
文摘Long-span bridges are usually constructed over waterways that involve substantial ship traffic,resulting in a risk of collisions between the bridge girders and over-height ships.The consequences of this can be severe structural damage or even collapse.Accurate measurement of ship dimensions is an effective way to monitor approaching over-height ships and avoid collisions.However,the performance of current techniques for estimating the size of moving objects can be undermined by large sensor-to-object distance,limiting their applicability.In this study,we propose a digital twin-assisted ship size measurement framework that can overcome such limitations through a predictive model and virtual-to-real-world transfer learning.Specifically,a 3D synthetic environment is first established to generate a synthetic dataset,which includes ship images,positions,and dimensions.Then the pixel information and spatial coordinates of ships are adopted as regressors,and ship dimensions are selected as the output variables to pre-train deep learning models using the generated dataset.Coordinate system transformations are applied to address dataset bias between the simulated world and real-world,as well as improve the model’s generalization.The pre-trained models are compared using supervised virtual-to-real-world transfer learning to select the version with optimal real-world performance.The mean absolute percentage error is only 3.74%across varying camera-to-ship distances,which demonstrates that the proposed method is effective for over-limit ship monitoring.
基金funded by the National Natural Science Foundation of China,grant number U24A20135Inner Mongolia Natural Science Foundation major project,grant number 2023ZD12+7 种基金Inner Mongolia Autonomous Region key research and development and achievement transformation plan project,grant number 2023YFHH0090Natural Science Foundation of Inner Mongolia,grant number 2022MS05006Inner Mongolia Autonomous Region Talent Development FundUniversity basic research business expenses,grant number 2023RCTD012University basic research business expenses,grant number 2023QNJS075Postgraduate Research Innovation Program and of Inner Mongolia Autonomous Region,grant number KC2024053BUniversity basic research business expenses,grant number 2024YXXS012National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology,grant number GZ2023KF012.
文摘In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.
基金supported by the National Natural Science Foundation of China(Nos.12275321,12121005,12475129,and 12335009)the Natural Science Foundation of Guangdong Province,China(No.2025A1515012112)+6 种基金the International Atomic Energy Agency Coordinated Research Project F41034(No.28649)the computational resources from Sun Yat-sen University the National Supercomputer Center in Guangzhouthe Open Project of Guangxi Key Laboratory of Nuclear Physics and Nuclear Technology(No.NLK2023-08)the Central Government Guidance Funds for Local Scientific and Technological Development,China(No.Guike ZY22096024)the Guangdong Major Project of Basic and Applied Basic Research(No.2021B0301030006)Young Scientists Fund of the National Natural Science Foundation of China(No.12405144)the National Key Research and Development Program(MOST 2022YFA1602304).
文摘A new multi-detector array named HALIMA(Hybrid Array for LIfetime MeAsurement)has been developed at Lanzhou for nuclear structure studies in fission.The array comprises eight BGO-shielded High-Purity Germanium detectors and twenty fast Ce-doped Lanthanum Bromide[LaBr_(3)(Ce)]detectors shielded with CsI(Tl).HALIMA is further complemented by two ancillary detector systems:fission fragment(FF)detectors and β detectors.This configuration enables precise sub-nanosecond lifetime measurements using the fourfold FF/β-Ge-LaBr_(3)(Ce)-LaBr_(3)(Ce)coincidence technique.The performance and specifications of the detectors,associated electronics,and the data acquisition system are presented in detail.The advantage of FF selectivity is emphasized,which significantly enhances sensitivity to specific fission channels.Using this approach,the lifetimes of the nuclear excited states populated in the spontaneous fission of^(252)Cf were measured,showing good agreement with the established literature values.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金National Natural Science Foundation of China (50475041)
文摘This article introduces a surface measurement system which is able to take a measurement in an extremely short period of less than 2 milliseconds. It is composed of two cameras together with a specifically designed projector that projects an instantaneous random image pattern onto the objective surface. With the aid of the projected pattern, a match of image with corresponding sub-pixel is steadily established and a cluster of dense 3D points is obtained at the same time. A detailed discussion about the des...
文摘A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine. The temperature at the measuring point is converted into corresponding voltage signal by the thermo-couple first. Then after the V/F stage, the voltage signal is converted into the frequency signal to drive the infrared light-emitting diode to transmit infrared pulses. At the receiver end, a photosensitive audion receives the infrared pulses. After conversion, the voltage recorded by the receiver stands for the magnitude of temperature at the measuring point. Test results of the system indicate that the system is practical and the system can perform multipoint looping temperature measurements for the piston.
文摘An effective method was proposed to establish the continuous cooling transformation（CCT） diagrams of aluminum alloys using in situ voltage measurement.The voltage change of samples with predefined dimension was recorded under the constant current state during continuous cooling.Solutionizing time,together with starting and finishing temperatures of phase transformation of the alloy can be obtained from relationships of voltage vs time and temperature.A critical cooling rate without detectable phase transition during continuous cooling can be determined.Continuous cooling transformation diagrams of tested samples can be established conveniently based on these results.Microstructure observation and differential scanning calorimetry（DSC） testing were applied to verify the reliability of continuous cooling transformation diagram.
基金Supported by Horizontal Program of Space Long March Rocket Technology Co. Ltd (500036)
文摘Dual-frequency and multi-polarization spaceborne rain and cloud measuring radar is the inevitable trend of remote sensing techniques.Techniques of new generation dual-frequency and multi-polarization spaceborne rain and cloud measuring radar are studied systematically.Radar block diagram and main parameters are presented.Antenna subsystem scheme is analyzed and antenna parameters are proposed.Central electronic device subsystem scheme is given and data rate of spaceborne radar is calculated.This paper is a meaningful try for carrying out spaceborne rain and cloud measuring radar design,acting as a reference to Chinese spaceborne rain and cloud measuring radar design and production in future.
