Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or ...Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or attitude instability,seriously compromising mission reliability.To address this engineering challenge,this paper proposes a multi-point low-impact locking/release mechanism based on the mobility model and energy conversion strategy.Through establishing a DOF constraint framework system,this paper systematically analyzes the energy transfer and conversion characteristics during the wing separation process,reveals the generation mechanism of impact loads,and conducts research on low-impact design based on energy conversion strategy.Building on this foundation,a single-point locking/release mechanism employing parallel trapezoidal key shaft structure was designed,which increases frictional contact time and reduces the energy release rate,thereby achieving low-impact characteristics.The mechanism's performance was validated through physical prototype development and systematic functional testing(including unlocking force,synchronization,and impact tests).Experimental results demonstrate:(1)Under 14 kN preload condition,the maximum unlocking force was only 92.54 N,showing a linear relationship with preload that satisfies the"strong-connection/weak-unlock"design requirement;(2)Wing separation was completed within 46 ms,with synchronization time difference among three separation mechanisms stably controlled within 12-14 ms,proving rapid and reliable operation;(3)The unlocking impact acceleration ranged between 26 and 73 g,below the 100 g design limit,confirming the effectiveness of the energy conversion strategy.The proposed low-impact locking/release mechanism design method based on energy conversion strategy resolves the traditional challenges of high impact and synchronization deficiencies.The synergistic optimization mechanism of"structural load reduction and performance improvement"provides a highly reliable technical solution for wing separable mechanisms while offering novel design insights for wing connection/separation systems engineering.展开更多
In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not ...In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not only stable single-pulse state, but also special mode-locked pulses with the characteristics of high energy and noisy behaviors at proper pump power and cavity polarization state. In addition, we have deeply investigated the real-time spectral evolutions of the mode-locked pulses through the dispersive Fourier transformation(DFT) technique. It can be found that the pulse regime can actually consist of a lot of small noise pulses with randomly varying intensities. We believe that these results will further enrich the nonlinear dynamical processes in the ultrafast lasers.展开更多
The spatial constraints of aircraft have accelerated the development of multi-wing deployable mechanisms.These systems enable the rapid,sub-second deployment of multiple folding wings,which generate high-energy impact...The spatial constraints of aircraft have accelerated the development of multi-wing deployable mechanisms.These systems enable the rapid,sub-second deployment of multiple folding wings,which generate high-energy impacts upon locking-resulting in oscillations that can adversely affect aerodynamic performance.Despite their importance,the transient dynamic characteristics during deployment and locking remain insufficiently explored.This study presents an integrated dynamic model for a single-actuator,multi-wing deployable mechanism that accounts for joint clearances,component elasticity,and locking collisions.This model is used to analyze the influence of transient driving on the motion errors of multiple folding wings,the locking oscillation amplitude,and the complete stabilization time.Results indicate that as the driving force and transient deployment speed increase,all dynamic performance characteristics are notably affected.Specifically,raising the transient driving force from 3000 to 7000 N leads to a maximum increase of 60.8%in oscillation amplitude and 78.4%in stabilization time.By comparing the results of the prototype experiment with the theoretical model,it is found that the errors of the maximum locking oscillation amplitude and the complete stabilization time for the three groups of folding wings are all within the acceptable range,which verifies the theoretical model.These findings advance the theoretical understanding of transient deployment dynamics and locking oscillations in high-speed deployable mechanisms.展开更多
Synchronized dual-wavelength mode-locked laser is investigated numerically and experimentally in the normal dispersion regime.A programmable optical processor is introduced to shape the spectral profile and adjust the...Synchronized dual-wavelength mode-locked laser is investigated numerically and experimentally in the normal dispersion regime.A programmable optical processor is introduced to shape the spectral profile and adjust the net dispersion,which is demonstrated be a convenient and reliable approach to generate dual-color solitons.The time-stretch dispersive Fourier transform and frequency-resolved optical grating techniques are utilized to measure the spectral and temporal characteristics of dual-color solitons,respectively.The numerical results are consistent with experimental results.This work may facilitate the development of filter-based mode-locked laser and the understanding of multi-wavelength soliton dynamics.展开更多
Biology is governed by macromolecular interactions,perturbation of which often lies at the heart of disease.Most therapeutic drugs,whether they are small molecules or biologics,exert their effects through impeding suc...Biology is governed by macromolecular interactions,perturbation of which often lies at the heart of disease.Most therapeutic drugs,whether they are small molecules or biologics,exert their effects through impeding such interactions,whether they are of an enzyme with its substrate or a ligand with its receptor.Conversely,a handful of approved drugs and a larger number of candidates in development have the opposite effect:They either activate or inhibit a biological output by stabilizing a preexisting complex through reducing the rate at which its components dissociate(koff).展开更多
As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from di...As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.展开更多
This study presents an achievement of laser cooling of alkaline-earth atoms in the Chinese Space Station’s strontium(Sr)atomic space optical clock.The system’s core components,physical unit,optical unit,and electric...This study presents an achievement of laser cooling of alkaline-earth atoms in the Chinese Space Station’s strontium(Sr)atomic space optical clock.The system’s core components,physical unit,optical unit,and electrical unit,have a total volume of 306 L and a total mass of 163.8 kg.These compact and robust units can overcome mechanical vibrations and temperature fluctuations during space launch.The laser sources of the optical unit are composed of diode lasers,and the injection locking of slave lasers is automatically performed by a program.In the experiment,a blue magneto-optical trap of cold atoms was achieved,with the atom numbers estimated to be approximately(1.50±0.13)×10^(6) for 87Sr and(8.00±0.56)×10^(6) for 88Sr.This work establishes a foundation for atomic confinement and high-precision interrogation in space-based optical clocks and expands the frontiers of cold atom physics in microgravity.展开更多
Rubber-like materials that are commonly used in structural applications are modelled using hyperelastic material models.Most of the hyperelastic materials are nearly incompressible,which poses challenges,i.e.,volumetr...Rubber-like materials that are commonly used in structural applications are modelled using hyperelastic material models.Most of the hyperelastic materials are nearly incompressible,which poses challenges,i.e.,volumetric locking during numerical modelling.There exist many formulations in the context of the finite element method,among which the mixed displacementpressure formulation is robust.However,such a displacement-pressure formulation is less explored in meshfree methods,which mitigates the problem associated with mesh distortion during large deformation.This work addresses this issue of alleviating volumetric locking in the element-free Galerkin method(EFGM),which is one of the popular meshfree methods.A two-field mixed variational formulation using the perturbed Lagrangian approach within the EFGM framework is proposed for modelling nearly incompressible hyperelastic material models,such as Neo-Hookean and Mooney-Rivlin.Taking advantage of the meshless nature of the EFGM,this work introduces a unique approach by randomly distributing pressure nodes across the geometry,following specific guidelines.A wide spectrum of problems involving bending,tension,compression,and contact is solved using two approaches of the proposed displacement-pressure node formulation involving regular and irregular pressure node distribution.It is observed that both approaches give accurate results compared to the reference results,though the latter offers flexibility in the pressure nodal distribution.展开更多
In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement with...In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.展开更多
A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise...A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise. Like many low phase noise oscillators, a cavity magnonic oscillator faces the challenge that its narrow resonance profile is not well suited for injection locking amplification. This work presents an improved design for such an oscillator configured as an injection locking amplifier(ILA) with an extended lock range. The proposed design features a two-stage architecture, consisting of a pre-amplification oscillator and a cavity magnonic oscillator, separated by an isolator to prevent backward locking.By optimizing the circuit parameters of each stage, the proposed design achieved an order of magnitude increase in lock range, when compared to its predecessors, all while preserving the phase noise quality of the input, making it well-suited for narrowband, sensitive signal amplification. Furthermore, this work provides a method for using oscillators with high spectral purity as injection locking amplifiers.展开更多
The concrete hydration heat release process of the base plate is monitored using Roman optical time domain reflectometry（ROTDR） sensing sensors. The monitoring data shows that the internal maximum temperature of the...The concrete hydration heat release process of the base plate is monitored using Roman optical time domain reflectometry（ROTDR） sensing sensors. The monitoring data shows that the internal maximum temperature of the base plate is about 54 ℃ after the concrete was cured for 120 h. The fiber Bragg grating （FBG） temperature sensors are adopted to measure the surface temperature of the concrete and the temperature results are used to compensate the data measured by the pulse-prepump Brillouin optical time-domain analyzer （PPP-BOTDA） to obtain the real concrete surface strain of the base plate. The monitoring data is analyzed to obtain a clear understanding of the strain state of the base plate under the effect of concrete hydration heat release. The monitoring results demonstrate the potential of distributed optical fibre sensing techniques as a powerful tool in real-time construction monitoring, and also provide an important insight into the design, construction and maintenance of large hydraulic structures.展开更多
AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necess...AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necessitate 6 wk wrist immobilisation.METHODS A prospective,randomised controlled single-centre trial was conducted with 56 patients who had a displaced radius fracture were randomised to treatment either with a volar locking plate(n=29),or another treatment modality(n=27;cast immobilisation with or without wires or external fixator).Outcomes were measured at 12 wk.Functional outcome scores measured were the Patient-Rated Wrist Evaluation(PRWE)Score;Disabilities of the Arm,Shoulder and Hand and activities of daily living(ADLs).Clinical outcomes were wrist range of motion and grip strength.Radiographic parameters were volar inclination and ulnar variance.RESULTS Patients in the volar locking plate group had significantly better PRWE scores,ADL scores,grip strength and range of extension at three months compared with the control group.All radiological parameters were significantly better in the volar locking plate group at 3 mo.CONCLUSION The present study suggests that volar locking plates produced significantly better functional and clinical outcomes at 3 mo compared with other treatment modalities.Anatomical reduction was significantly more likely to be preserved in the plating group.Level of evidence:Ⅱ.展开更多
Complex tibial plateau fractures can seriously affect quality of life and physical and mental health of patients.The anatomical relationship between the proximal tibial bone and soft tissue is complex,resulting in dif...Complex tibial plateau fractures can seriously affect quality of life and physical and mental health of patients.The anatomical relationship between the proximal tibial bone and soft tissue is complex,resulting in different types of tibial plateau fractures.Violent trauma can lead to displaced fracture,serious soft tissue injury,and potentially,dislocation of the knee joint.Therefore,tibial plateau fractures are extremely unstable.AIM To assess the use of locking compression plate(LCP)+T-type steel plate for postoperative weight bearing and functional recovery of complex tibial plateau fractures.METHODS Ninety-seven patients with complex tibial plateau fractures who underwent surgery at our hospital were selected for retrospective study.Forty-nine patients had been treated with LCP+T-type steel plate limited internal fixation(study group),and 48 patients with bilateral ordinary steel plate support(control group).The operation process index,postoperative rehabilitation related index,Rasmussen score of the knee joint,tibial plateau varus angle(TPA),tibial plateau retroversion angle(PA),and surgical complications of the two groups were compared.RESULTS The operation time and intraoperative bone graft volume in the study group were lower than those in the control group(P<0.05).There were no significant differences in surgical bleeding,anterior external incision length,postoperative drainage,hospital stay duration,and fracture healing time between the groups(P>0.05).There was no significant difference in the TPA and PA angle between the groups immediately and 18 mo after surgery(P>0.05).At 12 mo after surgery,the Rasmussen scale score was higher in the study group than in the control group(P<0.05).There was no significant difference in the Rasmussen scale score at 18 mo after surgery,and the radiology score at 12 and 18 mo after surgery,between the two groups(P>0.05).The postoperative complication rate in the study group(3.77%)was lower than that in the control group(15.09%;P<0.05).CONCLUSION LCP+T-type steel plate internal fixation has advantages in terms of minimizing trauma and enabling early postoperative functional exercise,promoting functional recovery and lower limb weight-bearing,and reducing postoperative complications.展开更多
Despite extensive investigations,no precursor patterns for reliably predicting major earthquakes have thus far been identified.Seismogenic locked segments that can accumulate adequate strain energy to cause major eart...Despite extensive investigations,no precursor patterns for reliably predicting major earthquakes have thus far been identified.Seismogenic locked segments that can accumulate adequate strain energy to cause major earthquakes are highly heterogeneous and low brittle.The progressive cracking of the locked segments with these properties can produce an interesting seismic phenomenon:a landmark earthquake and a sequence of smaller subsequent earthquakes(pre-shocks)always arise prior to another landmark earthquake within a well-defined seismic zone and its current seismic period.Applying a mechanical model,magnitude constraint conditions,and case study data of 62 worldwide seismic zones,we show that two adjacent landmark earthquakes reliably occur at the volume-expansion point and peak-stress point(rupture)of a locked segment;thus,the former is an identified precursor for the latter.Such a precursor seismicity pattern before the locked-segment rupture has definite physical meanings,and it is universal regardless of the focal depth.Because the evolution of landmark earthquakes follows a deterministic rule described by the model,they are predictable.The results of this study lay a firm physical foundation for reliably predicting the occurrence of future landmark earthquakes in a seismic zone and can greatly improve our understanding of earthquake generation mechanism.展开更多
The envelope of a hypersonic vehicle is affected by severe fluctuating pressure, which causes the airborne antenna to vibrate slightly. This vibration mixes with the transmitted signals and thus introduces additional ...The envelope of a hypersonic vehicle is affected by severe fluctuating pressure, which causes the airborne antenna to vibrate slightly. This vibration mixes with the transmitted signals and thus introduces additional multiplicative phase noise. Antenna vibration and signal coupling effects as well as their influence on the lock threshold of the hypersonic vehicle carrier tracking system of the Ka band are investigated in this study. A vibration model is initially established to obtain phase noise in consideration of the inherent relationship between vibration displacement and electromagnetic wavelength. An analytical model of the Phase-Locked Loop（PLL）, which is widely used in carrier tracking systems, is established. The coupling effects on carrier tracking performance are investigated and quantitatively analyzed by imposing the multiplicative phase noise on the PLL model. Simulation results show that the phase noise presents a Gaussian distribution and is similar to vibration displacement variation. A large standard deviation in vibration displacement exerts a significant effect on the lock threshold. A critical standard deviation is observed in the PLL of Binary Phase Shift Keying（BPSK） and Quadrature Phase Shift Keying（QPSK） signals. The effect on QPSK signals is more severe than that on BPSK signals. The maximum tolerable standard deviations normalized by the wavelength of the carrier are 0.04 and 0.02 for BPSK and QPSK signals,respectively. With these critical standard deviations, lock thresholds are increased from à12 andà4 d B to 3 and à2 d B, respectively.展开更多
To predict the attitude of satellite during the whole deployment process and evaluate the locking impact, a numerical flexible model of a certain satellite associated with four flexible honeycomb solar panels was esta...To predict the attitude of satellite during the whole deployment process and evaluate the locking impact, a numerical flexible model of a certain satellite associated with four flexible honeycomb solar panels was established. The flexible solar panel was modeled by the finite element analysis (FEA), and the motion equations were derived by Lagrangian formulation. The locking process was based on the method of Hertzian contact, which enables one to predict the locking impact on the satellite and the subsequent oscillation of solar panels. The results reveal that locking operation has great impact on the attitude of the satellite, and the angular acceleration of satellite reaches 22.03°/s2 at the locking moment; the flexible solar panels model is feasible to predict the accurate response of the satellite during deployment and the oscillation of solar panels; the instantly impulsive force occurred during locking process is about 1.5 kN and the changing time is nearly 0.32 s. It provides an effective approach to present the flexible solar panels' deployment process and evaluate the locking impact.展开更多
The construction of the double-lane five-step ship lock of the Three Gorges Project （TGP） wascommenced in 1994, the excavation of the ship lock was completed by the end of 1999, and the ship lockwas put in operation...The construction of the double-lane five-step ship lock of the Three Gorges Project （TGP） wascommenced in 1994, the excavation of the ship lock was completed by the end of 1999, and the ship lockwas put in operation in June 2003. The side slopes of the ship lock are characterized by great height（170 m）, steepness （70 m in height of upright slope）, and great length （over 7000 m in total length）. Inassociation with the ship lock, the surrounding rocks in slope have a high potential to deform, withwhich the magnitude of deformation is restricted. Monitoring results show that the deformation of thefive-step ship lock high slopes of the TGP primarily occurred in excavation period, and deformationtended to be stable and convergent during operation period, suggesting the allowable ranges of deformation.At present, the slopes and lock chambers are stable, and the ship lock works well under normaloperation condition, enabling the social and economic benefits of the TGP. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polariza...This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polarization controllers. The experimental results show that the pulse-train nonuniformity is caused by the interaction between the nonuniform polarization states of the soliton pulses and the passive polarizer in the cavity.展开更多
A pilot-scale multilevel contact oxidation reactors system, coupled with saran lock carriers,was applied for the treatment of poultry farm wastewater. The removal efficiencies of CODcr, ammonia, and the total nitrogen...A pilot-scale multilevel contact oxidation reactors system, coupled with saran lock carriers,was applied for the treatment of poultry farm wastewater. The removal efficiencies of CODcr, ammonia, and the total nitrogen as well as the elimination performance of CODcr and total nitrogen along the three-level contact oxidation tanks under six designed operational models were investigated. Based on the performance of the nitrogen removal of the saran lock carriers and the distribution of anoxic–aerobic interspace under the suitable operation model, the mechanism of nitrogen removal of the system was also explored. The results revealed that the intermittent aeration under parallel model is the most suitable operation model, while the removal efficiencies of CODcr, ammonia, and the total nitrogen were 86.86%, 84.04%, and 80.96%, respectively. The effluent concentration of CODcr,ammonia, and the total nitrogen were 55.6 mg/L, 8.3 mg/L, and 12.0 mg/L, which satisfy both the discharge standard of pollutants for livestock and poultry breeding industry(GB18596–2001) and the first grade of the integrated wastewater discharge standard(GB 8978–1996). Moreover, the mechanism for the nitrogen removal should be attributed to the plenty of anoxic–aerobic interspaces of the biofilm and the three-dimensional spiral structure of the saran lock carriers, where the oxygen-deficient distribution was suitable for the happening of the simultaneous nitrification and denitrification process. Therefore, the multilevel contact oxidation tanks system is an effective pathway for the treatment of the poultry farm wastewater on the strength of a suitable operation model and novel carriers.展开更多
A lock solution composed of gentamicin sulfate(5 mg/mL) and ethylenediaminetetraacetic acid disodium salt(EDTA-Na2, 30 mg/mL) could fully eradicate in vivo bacterial biofilms in totally implantable venous access ports...A lock solution composed of gentamicin sulfate(5 mg/mL) and ethylenediaminetetraacetic acid disodium salt(EDTA-Na2, 30 mg/mL) could fully eradicate in vivo bacterial biofilms in totally implantable venous access ports(TIVAP). In this study, fabrication, conditioning and sterilization processes of antimicrobial lock solution(ALS) were detailed and completed by a stability study. Stability of ALS was conducted for12 months in vial(25 °C 7 2 °C, 60% 7 5% relative humidity(RH), and at 40 °C 7 2 °C, RH 75% 7 5%)and for 24 h and 72 h in TIVAP(40 °C 7 2 °C, RH 75% 7 5%). A stability indicating HPLC assay with UV detection for simultaneous quantification of gentamicin sulfate and EDTA-Na2 was developed. ALS was assayed by ion-pairing high performance liquid chromatography(HPLC) needing gentamicin derivatization, EDTA-Na2 metallocomplexation of samples and gradient mobile phase. HPLC methods to separate four gentamicin components and EDTA-Na2 were validated. Efficiency of sterility procedure and conditioning of ALS was confirmed by bacterial endotoxins and sterility tests. Physicochemical stability of ALS was determined by visual inspection, osmolality, pH, and sub-visible particle counting. Results confirmed that the stability of ALS in vials was maintained for 12 months and 24 h and 72 h in TIVAP.展开更多
文摘Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or attitude instability,seriously compromising mission reliability.To address this engineering challenge,this paper proposes a multi-point low-impact locking/release mechanism based on the mobility model and energy conversion strategy.Through establishing a DOF constraint framework system,this paper systematically analyzes the energy transfer and conversion characteristics during the wing separation process,reveals the generation mechanism of impact loads,and conducts research on low-impact design based on energy conversion strategy.Building on this foundation,a single-point locking/release mechanism employing parallel trapezoidal key shaft structure was designed,which increases frictional contact time and reduces the energy release rate,thereby achieving low-impact characteristics.The mechanism's performance was validated through physical prototype development and systematic functional testing(including unlocking force,synchronization,and impact tests).Experimental results demonstrate:(1)Under 14 kN preload condition,the maximum unlocking force was only 92.54 N,showing a linear relationship with preload that satisfies the"strong-connection/weak-unlock"design requirement;(2)Wing separation was completed within 46 ms,with synchronization time difference among three separation mechanisms stably controlled within 12-14 ms,proving rapid and reliable operation;(3)The unlocking impact acceleration ranged between 26 and 73 g,below the 100 g design limit,confirming the effectiveness of the energy conversion strategy.The proposed low-impact locking/release mechanism design method based on energy conversion strategy resolves the traditional challenges of high impact and synchronization deficiencies.The synergistic optimization mechanism of"structural load reduction and performance improvement"provides a highly reliable technical solution for wing separable mechanisms while offering novel design insights for wing connection/separation systems engineering.
基金supported by the Guangdong Basic and Applied Basic Research Foundation (No.2023A1515010093)the Shenzhen Fundamental Research Program (Stable Support Plan Program)(Nos.JCYJ20220809170611004, 20231121110828001 and 20231121113641002)the National Taipei University of Technology-Shenzhen University Joint Research Program (No.2024001)。
文摘In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not only stable single-pulse state, but also special mode-locked pulses with the characteristics of high energy and noisy behaviors at proper pump power and cavity polarization state. In addition, we have deeply investigated the real-time spectral evolutions of the mode-locked pulses through the dispersive Fourier transformation(DFT) technique. It can be found that the pulse regime can actually consist of a lot of small noise pulses with randomly varying intensities. We believe that these results will further enrich the nonlinear dynamical processes in the ultrafast lasers.
基金Supported by National Natural Science Foundation of China(Grant Nos.52192634,92471202,52105013,U2341237,T2388101).
文摘The spatial constraints of aircraft have accelerated the development of multi-wing deployable mechanisms.These systems enable the rapid,sub-second deployment of multiple folding wings,which generate high-energy impacts upon locking-resulting in oscillations that can adversely affect aerodynamic performance.Despite their importance,the transient dynamic characteristics during deployment and locking remain insufficiently explored.This study presents an integrated dynamic model for a single-actuator,multi-wing deployable mechanism that accounts for joint clearances,component elasticity,and locking collisions.This model is used to analyze the influence of transient driving on the motion errors of multiple folding wings,the locking oscillation amplitude,and the complete stabilization time.Results indicate that as the driving force and transient deployment speed increase,all dynamic performance characteristics are notably affected.Specifically,raising the transient driving force from 3000 to 7000 N leads to a maximum increase of 60.8%in oscillation amplitude and 78.4%in stabilization time.By comparing the results of the prototype experiment with the theoretical model,it is found that the errors of the maximum locking oscillation amplitude and the complete stabilization time for the three groups of folding wings are all within the acceptable range,which verifies the theoretical model.These findings advance the theoretical understanding of transient deployment dynamics and locking oscillations in high-speed deployable mechanisms.
基金Project supported by the Innovation Program for Quantum Science and Technology(Grant No.2023ZD0301000)the National Natural Science Foundation of China(Grant Nos.12434018,62475073,1243000542,11621404,11561121003,11727812,61775059,12074122,62405090,62035005,and 11704123)+1 种基金the Natural Science Foundation of Shanghai(Grant No.23ZR1419000)China Postdoctoral Science Foundation(Grant Nos.2023M741188 and 2024T170275)。
文摘Synchronized dual-wavelength mode-locked laser is investigated numerically and experimentally in the normal dispersion regime.A programmable optical processor is introduced to shape the spectral profile and adjust the net dispersion,which is demonstrated be a convenient and reliable approach to generate dual-color solitons.The time-stretch dispersive Fourier transform and frequency-resolved optical grating techniques are utilized to measure the spectral and temporal characteristics of dual-color solitons,respectively.The numerical results are consistent with experimental results.This work may facilitate the development of filter-based mode-locked laser and the understanding of multi-wavelength soliton dynamics.
文摘Biology is governed by macromolecular interactions,perturbation of which often lies at the heart of disease.Most therapeutic drugs,whether they are small molecules or biologics,exert their effects through impeding such interactions,whether they are of an enzyme with its substrate or a ligand with its receptor.Conversely,a handful of approved drugs and a larger number of candidates in development have the opposite effect:They either activate or inhibit a biological output by stabilizing a preexisting complex through reducing the rate at which its components dissociate(koff).
基金supported by the National Natural Science Foundation of China(42474003,42074007)the Fundamental Research Funds for the Central Universities(2042023kfyq01)。
文摘As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB35010202)the National Natural Science Foundation of China(Grants No.62275268)。
文摘This study presents an achievement of laser cooling of alkaline-earth atoms in the Chinese Space Station’s strontium(Sr)atomic space optical clock.The system’s core components,physical unit,optical unit,and electrical unit,have a total volume of 306 L and a total mass of 163.8 kg.These compact and robust units can overcome mechanical vibrations and temperature fluctuations during space launch.The laser sources of the optical unit are composed of diode lasers,and the injection locking of slave lasers is automatically performed by a program.In the experiment,a blue magneto-optical trap of cold atoms was achieved,with the atom numbers estimated to be approximately(1.50±0.13)×10^(6) for 87Sr and(8.00±0.56)×10^(6) for 88Sr.This work establishes a foundation for atomic confinement and high-precision interrogation in space-based optical clocks and expands the frontiers of cold atom physics in microgravity.
基金supported by the DST-SERB and VSSC,ISRO of the project titled“Functionality Enhancement through Design and Development of Advanced Finite Element Algorithms for STR tools”under IMPRINT.IIC(IMP/2019/000276)scheme.
文摘Rubber-like materials that are commonly used in structural applications are modelled using hyperelastic material models.Most of the hyperelastic materials are nearly incompressible,which poses challenges,i.e.,volumetric locking during numerical modelling.There exist many formulations in the context of the finite element method,among which the mixed displacementpressure formulation is robust.However,such a displacement-pressure formulation is less explored in meshfree methods,which mitigates the problem associated with mesh distortion during large deformation.This work addresses this issue of alleviating volumetric locking in the element-free Galerkin method(EFGM),which is one of the popular meshfree methods.A two-field mixed variational formulation using the perturbed Lagrangian approach within the EFGM framework is proposed for modelling nearly incompressible hyperelastic material models,such as Neo-Hookean and Mooney-Rivlin.Taking advantage of the meshless nature of the EFGM,this work introduces a unique approach by randomly distributing pressure nodes across the geometry,following specific guidelines.A wide spectrum of problems involving bending,tension,compression,and contact is solved using two approaches of the proposed displacement-pressure node formulation involving regular and irregular pressure node distribution.It is observed that both approaches give accurate results compared to the reference results,though the latter offers flexibility in the pressure nodal distribution.
基金supported by the National Major Scientific Instruments and Equipment Development Projects of China(No.41827808)the Major Program of the National Natural Science Foundation of China(No.42090055)Supported by Science and Technology Projects of Xizang Autonomous Region,China(No.XZ202402ZD0001)。
文摘In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.
基金funded by NSERC Discovery Grants, NSERC Discovery Accelerator Supplements, Innovation Proof-of-Concept Grant of Research Manitoba, and Faculty of Science Research Innovation and Commercialization Grant of University of Manitoba (C.-M.H.)。
文摘A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise. Like many low phase noise oscillators, a cavity magnonic oscillator faces the challenge that its narrow resonance profile is not well suited for injection locking amplification. This work presents an improved design for such an oscillator configured as an injection locking amplifier(ILA) with an extended lock range. The proposed design features a two-stage architecture, consisting of a pre-amplification oscillator and a cavity magnonic oscillator, separated by an isolator to prevent backward locking.By optimizing the circuit parameters of each stage, the proposed design achieved an order of magnitude increase in lock range, when compared to its predecessors, all while preserving the phase noise quality of the input, making it well-suited for narrowband, sensitive signal amplification. Furthermore, this work provides a method for using oscillators with high spectral purity as injection locking amplifiers.
基金The National Key Technology R&D Program during the 12th Five-Year Plan Period(No.2012BAK10B05)the State Key Program of National Natural Science of China(No.41427801)
文摘The concrete hydration heat release process of the base plate is monitored using Roman optical time domain reflectometry（ROTDR） sensing sensors. The monitoring data shows that the internal maximum temperature of the base plate is about 54 ℃ after the concrete was cured for 120 h. The fiber Bragg grating （FBG） temperature sensors are adopted to measure the surface temperature of the concrete and the temperature results are used to compensate the data measured by the pulse-prepump Brillouin optical time-domain analyzer （PPP-BOTDA） to obtain the real concrete surface strain of the base plate. The monitoring data is analyzed to obtain a clear understanding of the strain state of the base plate under the effect of concrete hydration heat release. The monitoring results demonstrate the potential of distributed optical fibre sensing techniques as a powerful tool in real-time construction monitoring, and also provide an important insight into the design, construction and maintenance of large hydraulic structures.
文摘AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necessitate 6 wk wrist immobilisation.METHODS A prospective,randomised controlled single-centre trial was conducted with 56 patients who had a displaced radius fracture were randomised to treatment either with a volar locking plate(n=29),or another treatment modality(n=27;cast immobilisation with or without wires or external fixator).Outcomes were measured at 12 wk.Functional outcome scores measured were the Patient-Rated Wrist Evaluation(PRWE)Score;Disabilities of the Arm,Shoulder and Hand and activities of daily living(ADLs).Clinical outcomes were wrist range of motion and grip strength.Radiographic parameters were volar inclination and ulnar variance.RESULTS Patients in the volar locking plate group had significantly better PRWE scores,ADL scores,grip strength and range of extension at three months compared with the control group.All radiological parameters were significantly better in the volar locking plate group at 3 mo.CONCLUSION The present study suggests that volar locking plates produced significantly better functional and clinical outcomes at 3 mo compared with other treatment modalities.Anatomical reduction was significantly more likely to be preserved in the plating group.Level of evidence:Ⅱ.
文摘Complex tibial plateau fractures can seriously affect quality of life and physical and mental health of patients.The anatomical relationship between the proximal tibial bone and soft tissue is complex,resulting in different types of tibial plateau fractures.Violent trauma can lead to displaced fracture,serious soft tissue injury,and potentially,dislocation of the knee joint.Therefore,tibial plateau fractures are extremely unstable.AIM To assess the use of locking compression plate(LCP)+T-type steel plate for postoperative weight bearing and functional recovery of complex tibial plateau fractures.METHODS Ninety-seven patients with complex tibial plateau fractures who underwent surgery at our hospital were selected for retrospective study.Forty-nine patients had been treated with LCP+T-type steel plate limited internal fixation(study group),and 48 patients with bilateral ordinary steel plate support(control group).The operation process index,postoperative rehabilitation related index,Rasmussen score of the knee joint,tibial plateau varus angle(TPA),tibial plateau retroversion angle(PA),and surgical complications of the two groups were compared.RESULTS The operation time and intraoperative bone graft volume in the study group were lower than those in the control group(P<0.05).There were no significant differences in surgical bleeding,anterior external incision length,postoperative drainage,hospital stay duration,and fracture healing time between the groups(P>0.05).There was no significant difference in the TPA and PA angle between the groups immediately and 18 mo after surgery(P>0.05).At 12 mo after surgery,the Rasmussen scale score was higher in the study group than in the control group(P<0.05).There was no significant difference in the Rasmussen scale score at 18 mo after surgery,and the radiology score at 12 and 18 mo after surgery,between the two groups(P>0.05).The postoperative complication rate in the study group(3.77%)was lower than that in the control group(15.09%;P<0.05).CONCLUSION LCP+T-type steel plate internal fixation has advantages in terms of minimizing trauma and enabling early postoperative functional exercise,promoting functional recovery and lower limb weight-bearing,and reducing postoperative complications.
基金supported by the National Key Research and Development Program of China (No. 2019YFC1509701)the Second Tibetan Plateau Scientific Expedition and Research Program (STEP) (No. 2019QZKK0904)+1 种基金the National Natural Science Foundation of China (No. 42107184)the China Postdoctoral Science Foundation (No. 2018M640181)
文摘Despite extensive investigations,no precursor patterns for reliably predicting major earthquakes have thus far been identified.Seismogenic locked segments that can accumulate adequate strain energy to cause major earthquakes are highly heterogeneous and low brittle.The progressive cracking of the locked segments with these properties can produce an interesting seismic phenomenon:a landmark earthquake and a sequence of smaller subsequent earthquakes(pre-shocks)always arise prior to another landmark earthquake within a well-defined seismic zone and its current seismic period.Applying a mechanical model,magnitude constraint conditions,and case study data of 62 worldwide seismic zones,we show that two adjacent landmark earthquakes reliably occur at the volume-expansion point and peak-stress point(rupture)of a locked segment;thus,the former is an identified precursor for the latter.Such a precursor seismicity pattern before the locked-segment rupture has definite physical meanings,and it is universal regardless of the focal depth.Because the evolution of landmark earthquakes follows a deterministic rule described by the model,they are predictable.The results of this study lay a firm physical foundation for reliably predicting the occurrence of future landmark earthquakes in a seismic zone and can greatly improve our understanding of earthquake generation mechanism.
基金co-supported by the National Basic Research Program of China (No. 2014CB340205)the Natural Science Foundation of Shaanxi Provincial Department of Education (No. 2016JM6016)the National Natural Science Foundation of China (No. 61473228)
文摘The envelope of a hypersonic vehicle is affected by severe fluctuating pressure, which causes the airborne antenna to vibrate slightly. This vibration mixes with the transmitted signals and thus introduces additional multiplicative phase noise. Antenna vibration and signal coupling effects as well as their influence on the lock threshold of the hypersonic vehicle carrier tracking system of the Ka band are investigated in this study. A vibration model is initially established to obtain phase noise in consideration of the inherent relationship between vibration displacement and electromagnetic wavelength. An analytical model of the Phase-Locked Loop（PLL）, which is widely used in carrier tracking systems, is established. The coupling effects on carrier tracking performance are investigated and quantitatively analyzed by imposing the multiplicative phase noise on the PLL model. Simulation results show that the phase noise presents a Gaussian distribution and is similar to vibration displacement variation. A large standard deviation in vibration displacement exerts a significant effect on the lock threshold. A critical standard deviation is observed in the PLL of Binary Phase Shift Keying（BPSK） and Quadrature Phase Shift Keying（QPSK） signals. The effect on QPSK signals is more severe than that on BPSK signals. The maximum tolerable standard deviations normalized by the wavelength of the carrier are 0.04 and 0.02 for BPSK and QPSK signals,respectively. With these critical standard deviations, lock thresholds are increased from à12 andà4 d B to 3 and à2 d B, respectively.
文摘To predict the attitude of satellite during the whole deployment process and evaluate the locking impact, a numerical flexible model of a certain satellite associated with four flexible honeycomb solar panels was established. The flexible solar panel was modeled by the finite element analysis (FEA), and the motion equations were derived by Lagrangian formulation. The locking process was based on the method of Hertzian contact, which enables one to predict the locking impact on the satellite and the subsequent oscillation of solar panels. The results reveal that locking operation has great impact on the attitude of the satellite, and the angular acceleration of satellite reaches 22.03°/s2 at the locking moment; the flexible solar panels model is feasible to predict the accurate response of the satellite during deployment and the oscillation of solar panels; the instantly impulsive force occurred during locking process is about 1.5 kN and the changing time is nearly 0.32 s. It provides an effective approach to present the flexible solar panels' deployment process and evaluate the locking impact.
文摘The construction of the double-lane five-step ship lock of the Three Gorges Project （TGP） wascommenced in 1994, the excavation of the ship lock was completed by the end of 1999, and the ship lockwas put in operation in June 2003. The side slopes of the ship lock are characterized by great height（170 m）, steepness （70 m in height of upright slope）, and great length （over 7000 m in total length）. Inassociation with the ship lock, the surrounding rocks in slope have a high potential to deform, withwhich the magnitude of deformation is restricted. Monitoring results show that the deformation of thefive-step ship lock high slopes of the TGP primarily occurred in excavation period, and deformationtended to be stable and convergent during operation period, suggesting the allowable ranges of deformation.At present, the slopes and lock chambers are stable, and the ship lock works well under normaloperation condition, enabling the social and economic benefits of the TGP. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
基金Project supported by the Natural Science Foundation of Guangdong Province,China (Grant No 04010397)
文摘This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polarization controllers. The experimental results show that the pulse-train nonuniformity is caused by the interaction between the nonuniform polarization states of the soliton pulses and the passive polarizer in the cavity.
基金supported of the Major Science and Technology Program for Water Pollution Control and Treatment(Nos.2017ZX07102004-002 and 2012ZX07201002-6)
文摘A pilot-scale multilevel contact oxidation reactors system, coupled with saran lock carriers,was applied for the treatment of poultry farm wastewater. The removal efficiencies of CODcr, ammonia, and the total nitrogen as well as the elimination performance of CODcr and total nitrogen along the three-level contact oxidation tanks under six designed operational models were investigated. Based on the performance of the nitrogen removal of the saran lock carriers and the distribution of anoxic–aerobic interspace under the suitable operation model, the mechanism of nitrogen removal of the system was also explored. The results revealed that the intermittent aeration under parallel model is the most suitable operation model, while the removal efficiencies of CODcr, ammonia, and the total nitrogen were 86.86%, 84.04%, and 80.96%, respectively. The effluent concentration of CODcr,ammonia, and the total nitrogen were 55.6 mg/L, 8.3 mg/L, and 12.0 mg/L, which satisfy both the discharge standard of pollutants for livestock and poultry breeding industry(GB18596–2001) and the first grade of the integrated wastewater discharge standard(GB 8978–1996). Moreover, the mechanism for the nitrogen removal should be attributed to the plenty of anoxic–aerobic interspaces of the biofilm and the three-dimensional spiral structure of the saran lock carriers, where the oxygen-deficient distribution was suitable for the happening of the simultaneous nitrification and denitrification process. Therefore, the multilevel contact oxidation tanks system is an effective pathway for the treatment of the poultry farm wastewater on the strength of a suitable operation model and novel carriers.
基金supported by Centre de Recherche Translationnelle de I'Institut Pasteur, grant Number S- PI15007-02Asupported by the French Government's Investissement d'Avenir program:Laboratoire d'Excellence ‘Integrative Biology of Emerging Infectious Diseases’ (grant no. ANR-10-LABX62-IBEID.)+1 种基金the Fondation pour la Recherche Médicale (grant no. DEQ. 20140329508)the Center for Translational Science of the Institut Pasteur (S-PI15007-02A)
文摘A lock solution composed of gentamicin sulfate(5 mg/mL) and ethylenediaminetetraacetic acid disodium salt(EDTA-Na2, 30 mg/mL) could fully eradicate in vivo bacterial biofilms in totally implantable venous access ports(TIVAP). In this study, fabrication, conditioning and sterilization processes of antimicrobial lock solution(ALS) were detailed and completed by a stability study. Stability of ALS was conducted for12 months in vial(25 °C 7 2 °C, 60% 7 5% relative humidity(RH), and at 40 °C 7 2 °C, RH 75% 7 5%)and for 24 h and 72 h in TIVAP(40 °C 7 2 °C, RH 75% 7 5%). A stability indicating HPLC assay with UV detection for simultaneous quantification of gentamicin sulfate and EDTA-Na2 was developed. ALS was assayed by ion-pairing high performance liquid chromatography(HPLC) needing gentamicin derivatization, EDTA-Na2 metallocomplexation of samples and gradient mobile phase. HPLC methods to separate four gentamicin components and EDTA-Na2 were validated. Efficiency of sterility procedure and conditioning of ALS was confirmed by bacterial endotoxins and sterility tests. Physicochemical stability of ALS was determined by visual inspection, osmolality, pH, and sub-visible particle counting. Results confirmed that the stability of ALS in vials was maintained for 12 months and 24 h and 72 h in TIVAP.
