With the widespread deployment of assembly robots in smart manufacturing,efficiently offloading tasks and allocating resources in highly dynamic industrial environments has become a critical challenge for Mobile Edge ...With the widespread deployment of assembly robots in smart manufacturing,efficiently offloading tasks and allocating resources in highly dynamic industrial environments has become a critical challenge for Mobile Edge Computing(MEC).To address this challenge,this paper constructs a cloud-edge-end collaborative MEC system that enables assembly robots to offload complex workflow tasks via multiple paths(horizontal,vertical,and hybrid collaboration).Tomitigate uncertainties arising frommobility,the location predictionmodule is employed.This enables proactive channel-quality estimation,providing forward-looking insights for offloading decisions.Furthermore,we propose a fairness-aware joint optimization framework.Utilizing an improved Multi-Agent Deep Reinforcement Learning(MADRL)algorithm whose reward function incorporates total system cost,positional reliability,and timeout penalties,the framework aims to balance resource distribution among assembly robots while maximizing system utility.Simulation results demonstrate that the proposed framework outperforms traditional offloading strategies.By integrating predictive mobility management with fairness-aware optimization,the framework offers a robust solution for dynamic industrial MEC environments.展开更多
The diversion effect caused by the linked structure in a metro tunnel with cross-passage complicates the impact of longitudinal fire source location on the smoke backflow layering behavior that has not been clarified,...The diversion effect caused by the linked structure in a metro tunnel with cross-passage complicates the impact of longitudinal fire source location on the smoke backflow layering behavior that has not been clarified,despite the fact that the scenario exists in practice.A series of laboratory-scale experiments were conducted in this study to investigate the smoke back-layering length in a model tunnel with cross-passage.The heat release rate,the velocity of longitudinal air flow,and the location of the fire source were all varied.It was found that the behavior of smoke backflow for the fire source located at the upstream of bifurcation point resembles a single-hole tunnel fire.As the fire source’s position shifts downstream from the bifurcation point,the length of smoke back-layering progressively increases.A competitive interaction exists between airflow diversion and smoke diversion during smoke backflow,significantly affecting the smoke back-layering length in the main tunnel.The dimensionless smoke back-layering length model was formulated in a tunnel featuring a cross-passage,taking into account the positions of longitudinal fire sources.The dimensionless smoke back-layering length exhibits a positive correlation with the 17/18 power of total heat release rate Q and a negative correlation with the 5/2 power of longitudinal ventilation velocity V.展开更多
Traveling wave(TW)fault location technology has been widely used in transmission systems due to its high accuracy and simplicity.Recently,there has been growing interest in applying this technology to medium voltage(M...Traveling wave(TW)fault location technology has been widely used in transmission systems due to its high accuracy and simplicity.Recently,there has been growing interest in applying this technology to medium voltage(MV)distribution lines.However,current practices in its deployment,signal measurement,and threshold setting are usually from the application experiences in transmission lines,despite significant differences in fault-induced wave characteristics between transmission and distribution systems.To address these issues,this paper investigates the feasibility and applicability of TW fault technology in MV overhead distribution lines through characteristic analysis of fault-induced TWs.The propagation characteristics of aerial mode and zero mode TWs on overhead distribution lines are studied.Furthermore,it evaluates the influence of critical distri-bution network components including distribution transformers,multi-branch configurations,and busbar structures on wave propagation characteristics.Deployment strategies for traveling wave fault location(TWFL)devices is proposed to address the unique challenges of distribution networks,while the fault location method is also improved.Field test results demonstrate the effectiveness of the proposed methodology,showing improved fault detection accuracy and system reliability in distri-bution network applications.This research provides practical implementation suggestions for TWFL technology in distribution networks.展开更多
With the popularization of smart devices,Location-Based Services(LBS)greatly facilitates users’life,but at the same time brings the risk of users’location privacy leakage.Existing location privacy protection methods...With the popularization of smart devices,Location-Based Services(LBS)greatly facilitates users’life,but at the same time brings the risk of users’location privacy leakage.Existing location privacy protection methods are deficient,failing to reasonably allocate the privacy budget for non-outlier location points and ignoring the critical location information that may be contained in the outlier points,leading to decreased data availability and privacy exposure problems.To address these problems,this paper proposes a Mix Location Privacy Preservation Method Based on Differential Privacy with Clustering(MLDP).The method first utilizes the DBSCAN clustering algorithm to classify location points into non-outliers and outliers.For non-outliers,the scoring function is designed by combining geographic information and semantic information,and the privacy budget is allocated according to the heat intensity of the hotspot area;for outliers,the scoring function is constructed to allocate the privacy budget based on their correlation with the hotspot area.By comprehensively considering the geographic information,semantic information,and correlation with hotspot areas of the location points,a reasonable privacy budget is assigned to each location point,andfinallynoise is added throughthe Laplacemechanismto realizeprivacyprotection.Experimental results on tworeal trajectory datasets,Geolife and T-Drive,show that the MLDP approach significantly improves data availability while effectively protecting location privacy.Compared with the comparison methods,the maximum available data ratio of MLDP is 1.Moreover,compared with the RandomNoise method,its execution time is 0.056–0.061 s longer,and the logRE is 0.12951–0.62194 lower;compared with KemeansDP,QTK-DP,DPK-F,IDP-SC,and DPK-Means-up methods,it saves 0.114–0.296 s in execution time,and the logRE is 0.01112–0.38283 lower.展开更多
Unmanned aerial vehicle(UAV)swarm network consisting of a collection of micro UAVs can be used for many applications.It is well established that packet routing is a fundamental problem to achieve UAV collaboration.How...Unmanned aerial vehicle(UAV)swarm network consisting of a collection of micro UAVs can be used for many applications.It is well established that packet routing is a fundamental problem to achieve UAV collaboration.However,the highly dynamic nature of UAVs,frequently changing network topologies and security issues,poses significant challenges to packet forwarding in UAV networks.The existing topology-based routing protocols are not well suited in UAV network due to their high controlling overhead or excessive end-to-end delay.Geographic routing is regarded as a promising solution,as it only requires local information.In order to enhance the accuracy and security of geographic routing in highly dynamic UAV network,in this paper,we propose a new predictive geographic(PGeo)routing strategy with location verification.First,a detection mechanism is adopted to recognize malicious UAVs falsifying their location.Then,an accurate average service time of a packet in the medium access control(MAC)layer is derived to assist location prediction.The proposed delay model can provide a theoretical basis for future work,and our simulation results reveal that PGeo outstrips the existing geographic routing protocols in terms of packet delivery ratio in the presence of location spoofing behavior.展开更多
This paper introduces part of the content in the association standard,T/CAAM0002–2020 Nomenclature and Location of Acupuncture Points for Laboratory Animals Part 3:Mouse.This standard was released by the China Associ...This paper introduces part of the content in the association standard,T/CAAM0002–2020 Nomenclature and Location of Acupuncture Points for Laboratory Animals Part 3:Mouse.This standard was released by the China Association of Acupuncture and Moxibustion on May 15,2020,implemented on October 31,2020,and published by Standards Press of China.The standard was drafted by the Institute of Acupuncture and Moxibustion,China Academy of Chinese Medical Sciences,and the Nanjing University of Chinese Medicine.Principal draftsmen:Xiang-hong JING and Xing-bang HUA.Participating draftsmen:Wan-zhu BAI,Bin XU,Dong-sheng XU,Yi GUO,Tie-ming MA,Xin-jun WANG,and Sheng-feng LU.展开更多
This paper introduces part of the content in the association standard,T/CAAM0002–2020 Nomenclature and Location of Acupuncture Points for Laboratory Animals Part 2:Rat.This standard was released by the China Associat...This paper introduces part of the content in the association standard,T/CAAM0002–2020 Nomenclature and Location of Acupuncture Points for Laboratory Animals Part 2:Rat.This standard was released by the China Association of Acupuncture and Moxibustion on May 15,2020,implemented on October 31,2020,and published by Standards Press of China.The standard was drafted by the Institute of Acupuncture and Moxibustion,China Academy of Chinese Medical Sciences,and the Nanjing University of Chinese Medicine.Principal draftsmen:Xiang-hong JING and Xing-bang HUA.Participating draftsmen:Wan-Zhu BAI,Bin XU,Dong-sheng XU,Yi GUO,Tie-ming MA,Xin-jun WANG,and Sheng-feng LU.展开更多
With the evolution of location-based services(LBS),a new type of LBS has already gain a lot of attention and implementation,we name this kind of LBS as the Device-Dependent LBS(DLBS).In DLBS,the service provider(SP)wi...With the evolution of location-based services(LBS),a new type of LBS has already gain a lot of attention and implementation,we name this kind of LBS as the Device-Dependent LBS(DLBS).In DLBS,the service provider(SP)will not only send the information according to the user’s location,more significant,he also provides a service device which will be carried by the user.DLBS has been successfully practised in some of the large cities around the world,for example,the shared bicycle in Beijing and London.In this paper,we,for the first time,blow the whistle of the new location privacy challenges caused by DLBS,since the service device is enabled to perform the localization without the permission of the user.To conquer these threats,we design a service architecture along with a credit system between DLBS provider and the user.The credit system tie together the DLBS device usability with the curious behaviour upon user’s location privacy,DLBS provider has to sacrifice their revenue in order to gain extra location information of their device.We make the simulation of our proposed scheme and the result convince its effectiveness.展开更多
Despite advances in surgery,chemotherapy,and radiotherapy,the treatment of colorectal cancer(CRC)requires more personalized approaches based on tumor biology and molecular profiling.While some relevant mutations have ...Despite advances in surgery,chemotherapy,and radiotherapy,the treatment of colorectal cancer(CRC)requires more personalized approaches based on tumor biology and molecular profiling.While some relevant mutations have been associated with differential response to immunotherapy,such as RAS and BRAF mutations limiting response to anti-epithelial growth factor receptor drugs or microsatellite instability predisposing susceptibility to immune checkpoint inhibitors,the role of inflammation in dictating tumor progression and treatment response is still under investigation.Several inflammatory biomarkers have been identified to guide patient prognosis.These include the neutrophil-lymphocyte ratio,Glasgow prognostic score(GPS)and its modified version,lymphocyte-Creactive protein ratio,and platelet-lymphocyte ratio.However,these markers are not yet included in the standard clinical management of patients with CRC,and further research is needed to evaluate their efficacy in different patient populations.A recent study by Wang et al,published in the World Journal of Gastroenterology,sheds light on the prognostic significance of pan-immune-inflammation value(PIV)in CRC,particularly concerning primary tumor location.Specifically,the authors found that a high PIV was strongly correlated with worse disease-free survival in patients with left-sided colon cancer,whereas no such association was observed in patients with right-sided colon cancer.Integrating tumor location into the prognostic assessment of CRC may improve our ability to more accurately identify high-risk patients and develop personalized treatment plans that are more likely to improve patient outcomes.展开更多
Cropland abandonment has been a widespread phenomenon in mountainous areas due to the increasing number of natural disasters and the massive migration of rural labor in the process of rapid urbanization.Land transfer ...Cropland abandonment has been a widespread phenomenon in mountainous areas due to the increasing number of natural disasters and the massive migration of rural labor in the process of rapid urbanization.Land transfer is a crucial prerequisite for ensuring food security and fostering rural revitalization.How to promote land transfer in mountainous areas remains a challenging but important task.Nevertheless,there is a dearth of research examining land transfers among farm households that specifically address mountainous regions,and the influence of grassroots governance and geographic location has not been thoroughly elucidated within this particular context.Based on 895household samples collected in Dabie Mountainous Area in China,this study employs binary and ordinal logistic regression models to provide a more comprehensive analysis on land transfers among rural households and the determinants,including the decision to transfer land,the existence of land transfer rents,the channel of land transfer,the duration of the transfer,the pre-transfer cultivation situation,and the level of satisfaction with the land transfer rent.The findings reveal that grassroots governance,geographic location,livelihood capital,and demographic factors significantly influence land transfers among rural households.Specifically,villagers'public participation positively affects land transfer participation(β=0.235,p<0.05),while the operation of village rules and regulations negatively impacts it(β=-0.296,p<0.05).Village cadre satisfaction positively influences both land transfer rent(β=0.274,p<0.05)and rent satisfaction(β=0.303,p<0.05).Improved civil relations in the village correlate with lower land transfer rent(β=-0.511,p<0.05),while a better social atmosphere is associated with higher satisfaction with transfer rent(β=0.575,p<0.01).Households at higher elevations tend to prefer government-mediated land transfers with longer durations.The distances to the township and county centers have contrasting effects on land transfer rent,but their impacts on participation in land transfer,choice of transfer channel,and duration are consistent.The study also found that different types of livelihood capital,as well as the demographic characteristics of households,significantly affect various aspects of land transfer.These empirical findings can inform policymaking to promote more efficient land transfers in mountainous region.展开更多
The Thyristor-Controlled Series Compensator(TCSC)presents an effective solution for mitigating transmission congestion in power systems by regulating the distribution of line power flow.However,inherent faults within ...The Thyristor-Controlled Series Compensator(TCSC)presents an effective solution for mitigating transmission congestion in power systems by regulating the distribution of line power flow.However,inherent faults within the TCSC may lead to an unintended intensification of transmission congestion in other sections of the system post-installation,resulting in non-coherent phenomena of line blocking.In response to this challenge,this paper introduces a novel two-stage site selectionmethod for TCSC,emphasizing the enhancement of coherence in addressing line-blocking issues.Through rigorous non-coherent verification,this method mitigates the risk of line congestion deterioration due to TCSC faults.In the initial stage of the proposed method,TCSC faults are not considered during the extraction of system states.System state analysis is performed based on the TCSC site selection model,aiming to minimize system load reduction.The preliminary recommended installation position for TCSC is determined by sorting the frequency of TCSC installation occurrences on lines extracted from the analyzed system states.In the subsequent stage,accounting for the influence of TCSC faults on line faults,system operating states are extracted.Line and system congestion indices are calculated through the statistical analysis of the system state analysis results.The installation of TCSC at the preliminary position is scrutinized to identify non-coherent phenomena of line congestion on other lines.If such phenomena are observed,the installation position is excluded,and the TCSC site selection process is reinitiated based on the methodology from the first stage.To validate the effectiveness of the proposed method,a case study is conducted on a modified RBTS test system.The case study results indicate that,compared with TCSC siting schemes that do not consider transmission congestion non-coherency,the proposed non-coherency-based siting scheme reduces the system congestion expectation(SCE)and system congestion probability(SCP)by 17.7%and 11.4%,respectively,while lowering the LOLP and EENS by 2.56% and 4.55%,respectively.These results demonstrate that the proposed method can effectively alleviate transmission congestion and enhance the overall reliability of the system.展开更多
Accurate topology information is crucial to management and application in an active low-voltage distribution network(LVDN).Existing topology identification(TI)methods mostly lack a systematic framework to obtain preci...Accurate topology information is crucial to management and application in an active low-voltage distribution network(LVDN).Existing topology identification(TI)methods mostly lack a systematic framework to obtain precise hierarchical relations and consumers’segment locations.Their performances are usually deteriorated by introduction of incomplete and tampered smart meter data.To address the problem of TI with penetration of PV prosumers,non-consumption users,and electricity thieves,a data-driven algorithm is proposed via measurements of nodal voltage magnitude and active power,without any prior network information.Inspired by engineering applications of graph theory knowledge,we cast connection problems of LVDN into the solution of adjacency matrices.Up-down and parallel relations of branches are first identified using active power,based on feature extraction of frequency domain filtering and correlation.Correlation factor analysis is subsequently adopted to assign multiple consumers to specific subnetworks,and then consumers’segments are precisely located by combining regression analysis and association strategy.The proposed algorithm is successfully examined on in a complex LVDN,and results show higher robustness under different scenarios.展开更多
Passive microseismic monitoring(PMM)serves as a fundamental technology for assessing hydraulic fracturing(HF)effectiveness,with a key focus on accurate and efficient phase detection/arrival picking and source location...Passive microseismic monitoring(PMM)serves as a fundamental technology for assessing hydraulic fracturing(HF)effectiveness,with a key focus on accurate and efficient phase detection/arrival picking and source location.In PMM data processing,the data-driven paradigm(deep learning based)outperforms the model-driven paradigm in characteristic extraction but lacks quality control and uncertainty quantification.Monte Carlo Dropout,a Bayesian uncertainty quantification technique,performs stochastic neuron deactivation through multiple forward propagation samplings.Therefore,this study proposes a deep learning neural network incorporating uncertainty quantification with manual quality control integration,establishing an optimized workflow spanning automated phase detection to robust source location.The methodology implementation comprises two principal components:(1)The MDNet employing Monte Carlo Dropout strategy enabling simultaneous phase detection/arrival picking and unce rtainty estimation;(2)an integrated hybrid-driven workflow with a traveltime-based inve rsion method for source location.Validation with field data demonstrates that MD-Net achieves superior performance under low signal-to-noise ratio conditions,maintaining detection accuracy exceeding 99%for both P-and S-waves.The phase arrival picking precision shows significant improvement,with a 40%reduction in standard deviation compared to the baseline model(P-S time difference decreasing from12.0 ms to 7.1 ms),while providing quantifiable uncertainty metrics for manual calibration.Source location results further reveal that our hybrid-driven workflow produces more physically plausible event distributions,with 100%of microseismic eve nts clustering along the primary fracture expanding direction.This performance surpasses traditional cross-correlation methods and single/multi-trace data-driven me thods in spatial rationality.This study establishes an inte rpretable,high-pre cision automated framework for HF-PMM applications,demonstrating potential for extension to diverse geological settings and monitoring configurations.展开更多
The study area is rich in shale gas resources and has reached the stage of comprehensive development. Shale gas extraction poses risks such as induced seismicity and well closure, compounded by the limited availabilit...The study area is rich in shale gas resources and has reached the stage of comprehensive development. Shale gas extraction poses risks such as induced seismicity and well closure, compounded by the limited availability of fi xed seismic monitoring stations nearby. To address these challenges, a dense observation array was developed within the study area to monitor and analyze microseismic activity during hydraulic fracturing. Microseismic events generated by hydraulic fracturing typically exhibit low amplitude and signal-to-noise ratio, rendering traditional manual analysis methods impractical. To overcome these limitations, an innovative artifi cial intelligence method combining picking-association-location (PAL) and match-expand- shift-stack (MESS) techniques (PALM) has been utilized for automated seismic detection. Numerous factors influence the accuracy of microseismic detection and localization. To evaluate these factors, the effects of various velocity structure models, instrument types, and station distributions on seismic location were analyzed and compared. The results indicate that the PALM method significantly mitigates the influence of velocity structure models on seismic location accuracy. Additionally, the use of broadband seismic instruments and a uniform station distribution enhances the precision of seismic location results. Furthermore, by integrating data from diff erent types of observation instruments, a comprehensive seismic catalog for the study area was established. These fi ndings not only enhance seismic location accuracy but also provide valuable guidance for optimizing regional seismic monitoring network design and improving seismic risk assessment.展开更多
The travel-time corrections for the primary seismic phases of 72 stations in the Guangdong seismic network,relative to the 1D South China travel-time model,were determined using joint hypocentral determination(JHD)and...The travel-time corrections for the primary seismic phases of 72 stations in the Guangdong seismic network,relative to the 1D South China travel-time model,were determined using joint hypocentral determination(JHD)and statistical analysis methods.The travel-time corrections for the Pg phase of 72 stations range between-0.25 s and 0.14 s,while the corrections for the Sg phase range between 0.27 s and 0.35 s,and those for the Pn phase are between-0.86 s and 0.07 s.The spatial distribution of travel-time corrections for Pg,Sg,and Pn phases of 72 stations correlates well with the geological structure in this region.This indicates that the travel-time corrections for Pg and Sg phases are mainly caused by the discrepancy between the actual crustal velocity structure beneath the stations and the 1D South China travel-time model.These corrections empirically compensate for systematic travel-time errors arising from such discrepancies.The primary factor contributing to the travel-time corrections for the Pn phase is the Moho undulations or tilt.These corrections are intended to compensate for systematic errors in travel time caused by variations in the actual Moho.By integrating the obtained travel-time corrections into the HYPO-SAT location algorithm,test results showed an obvious improvement in location accuracy and origin time precision for explosion events.The variation of horizontal distance between repeating earthquake pairs has also improved,with 86%of the repeating earthquake pair spacing being more accurately estimated after correction.This suggests the crucial significance of travel-time correction in earthquake location,and the consideration of travel-time correction exerts a notable impact on enhancing earthquake location accuracy.展开更多
Seismic source locations can characterize the spatial and temporal distributions of seismic sources,and can provide important basic data for earthquake disaster monitoring,fault activity characterization,and fracture ...Seismic source locations can characterize the spatial and temporal distributions of seismic sources,and can provide important basic data for earthquake disaster monitoring,fault activity characterization,and fracture growth interpretation.Waveform stacking-based location methods invert the source locations by focusing the source energy with multichannel waveforms,and these methods exhibit a high level of automation and noise-resistance.Taking the cross-correlation stacking(CCS)method as an example,this work attempts to study the influential factors of waveform stacking-based methods,and introduces a comprehensive performance evaluation scheme based on multiple parameters and indicators.The waveform data are from field monitoring of induced microseismicity in the Changning region(southern Sichuan Basin of China).Synthetic and field data tests reveal the impacts of three categories of factors on waveform stacking-based location:velocity model,monitoring array,and waveform complexity.The location performance is evaluated and further improved in terms of the source imaging resolution and location error.Denser array monitoring contributes to better constraining source depth and location reliability,but the combined impact of multiple factors,such as velocity model uncertainty and multiple seismic phases,increases the complexity of locating field microseismic events.Finally,the aspects of location uncertainty,phase detection,and artificial intelligencebased location are discussed.展开更多
This letter is a commentary on the findings of Huang et al,who emphasize the prognostic value of tumor location in gastric cancer.Analyzing data from 3287 patients using Kaplan-Meier and multivariate Cox models,the au...This letter is a commentary on the findings of Huang et al,who emphasize the prognostic value of tumor location in gastric cancer.Analyzing data from 3287 patients using Kaplan-Meier and multivariate Cox models,the authors found that the tumor location correlated with patient prognosis following surgery.Patients with tumors situated nearer to the stomach’s proximal end were associated with shorter survival periods and poorer outcomes.Notably,gender-based differences in tumor markers,particularly carbohydrate antigen 72-4,further highlight the need for sex-specific influence on the tumor location.Despite increasing recognition of tumor location as a prognostic factor,its role remains unclear in clinical prediction models for various cancers.This letter highlights the potential of incorporating tumor location into artificial intelligence-based prognostic tools to enhance prognostic models.It also outlines a stepwise framework for developing these models,from retrospective training to prospective multicenter validation and clinical implementation.In addition,it addresses the technical,ethical,and interoperability challenges critical to successful real-world prognosis.展开更多
This article is adapted from a speech delivered by Dato’Norman Muhamad,Ambassador of Malaysia to China,at the ASEAN-China(Beijing Municipal Administrative Center)Trade and Investment Promotion Conference.The text has...This article is adapted from a speech delivered by Dato’Norman Muhamad,Ambassador of Malaysia to China,at the ASEAN-China(Beijing Municipal Administrative Center)Trade and Investment Promotion Conference.The text has been edited for clarity and length.展开更多
Microseismic (MS) source location plays an important role in MS monitoring. This paper proposes a MS source location method based on particle swarm optimization (PSO) and multi-sensor arrays, where a free weight joint...Microseismic (MS) source location plays an important role in MS monitoring. This paper proposes a MS source location method based on particle swarm optimization (PSO) and multi-sensor arrays, where a free weight joints the P-wave first arrival data. This method adaptively adjusts the preference for “superior” arrays and leverages “inferior” arrays to escape local optima, thereby improving the location accuracy. The effectiveness and stability of this method were validated through synthetic tests, pencil-lead break (PLB) experiments, and mining engineering applications. Specifically, for synthetic tests with 1 μs Gaussian noise and 100 μs large noise in rock samples, the location error of the multi-sensor arrays jointed location method is only 0.30 cm, which improves location accuracy by 97.51% compared to that using a single sensor array. The average location error of PLB events on three surfaces of a rock sample is reduced by 48.95%, 26.40%, and 55.84%, respectively. For mine blast event tests, the average location error of the dual sensor arrays jointed method is 62.74 m, 54.32% and 14.29% lower than that using only sensor arrays 1 and 2, respectively. In summary, the proposed multi-sensor arrays jointed location method demonstrates good noise resistance, stability, and accuracy, providing a compelling new solution for MS location in relevant mining scenarios.展开更多
This paper proposes a fingerprint matching method integrating transfer learning and online learning to tackle the challenges of environmental adaptability and dynamic interference resistance in photovoltaic(PV)array D...This paper proposes a fingerprint matching method integrating transfer learning and online learning to tackle the challenges of environmental adaptability and dynamic interference resistance in photovoltaic(PV)array DC arc fault location methods based on electromagnetic radiation(EMR)signals.Initially,a comprehensive analysis of the time–frequency characteristics of series arc EMR signals is carried out to pinpoint effective data sources that reflect fault features.Subsequently,a multi-kernel domain-adversarial neural network(MKDANN)is introduced to extract domain-invariant features,and a feature extractor designed specifically for fingerprint matching is devised.To reduce inter-domain distribution differences,a multi-kernel maximum mean discrepancy(MK-MMD)is integrated into the adaptation layer.Moreover,to deal with dynamic environmental changes in real-world situations,the support-class passive aggressive(SPA)algorithm is utilized to adjust model parameters in real time.Finally,MKDANN and SPA technologies are smoothly combined to build a fully operational fault location model.Experimental results indicate that the proposed method attains an overall fault location accuracy of at least 95%,showing strong adaptability to environmental changes and robust interference resistance while maintaining excellent online learning capabilities during model migration.展开更多
基金supported by the National Key R&D Program of China under Grant Nos.2024YFD2400200 and 2024YFD2400204supported in part by the Science and Technology Development Program for the Two Zones under Grant No.2023LQ02004.
文摘With the widespread deployment of assembly robots in smart manufacturing,efficiently offloading tasks and allocating resources in highly dynamic industrial environments has become a critical challenge for Mobile Edge Computing(MEC).To address this challenge,this paper constructs a cloud-edge-end collaborative MEC system that enables assembly robots to offload complex workflow tasks via multiple paths(horizontal,vertical,and hybrid collaboration).Tomitigate uncertainties arising frommobility,the location predictionmodule is employed.This enables proactive channel-quality estimation,providing forward-looking insights for offloading decisions.Furthermore,we propose a fairness-aware joint optimization framework.Utilizing an improved Multi-Agent Deep Reinforcement Learning(MADRL)algorithm whose reward function incorporates total system cost,positional reliability,and timeout penalties,the framework aims to balance resource distribution among assembly robots while maximizing system utility.Simulation results demonstrate that the proposed framework outperforms traditional offloading strategies.By integrating predictive mobility management with fairness-aware optimization,the framework offers a robust solution for dynamic industrial MEC environments.
基金funded by the National Natural Science Foundation of China(NSFC)under Grant No.52278415the National Key Research and Development Program of China under Grant No.2022YFC3801104+2 种基金Hebei Provincial Department of Education Project under Grant No.QN2025304the Innovation Fund Project of Hebei University of Engineering under Grant No.SJ2401002066the Sichuan Science and Technology Program under Grant No.2023YFS0407。
文摘The diversion effect caused by the linked structure in a metro tunnel with cross-passage complicates the impact of longitudinal fire source location on the smoke backflow layering behavior that has not been clarified,despite the fact that the scenario exists in practice.A series of laboratory-scale experiments were conducted in this study to investigate the smoke back-layering length in a model tunnel with cross-passage.The heat release rate,the velocity of longitudinal air flow,and the location of the fire source were all varied.It was found that the behavior of smoke backflow for the fire source located at the upstream of bifurcation point resembles a single-hole tunnel fire.As the fire source’s position shifts downstream from the bifurcation point,the length of smoke back-layering progressively increases.A competitive interaction exists between airflow diversion and smoke diversion during smoke backflow,significantly affecting the smoke back-layering length in the main tunnel.The dimensionless smoke back-layering length model was formulated in a tunnel featuring a cross-passage,taking into account the positions of longitudinal fire sources.The dimensionless smoke back-layering length exhibits a positive correlation with the 17/18 power of total heat release rate Q and a negative correlation with the 5/2 power of longitudinal ventilation velocity V.
基金supported by the National Natural Sci-ence Foundation of China(No.52107109).
文摘Traveling wave(TW)fault location technology has been widely used in transmission systems due to its high accuracy and simplicity.Recently,there has been growing interest in applying this technology to medium voltage(MV)distribution lines.However,current practices in its deployment,signal measurement,and threshold setting are usually from the application experiences in transmission lines,despite significant differences in fault-induced wave characteristics between transmission and distribution systems.To address these issues,this paper investigates the feasibility and applicability of TW fault technology in MV overhead distribution lines through characteristic analysis of fault-induced TWs.The propagation characteristics of aerial mode and zero mode TWs on overhead distribution lines are studied.Furthermore,it evaluates the influence of critical distri-bution network components including distribution transformers,multi-branch configurations,and busbar structures on wave propagation characteristics.Deployment strategies for traveling wave fault location(TWFL)devices is proposed to address the unique challenges of distribution networks,while the fault location method is also improved.Field test results demonstrate the effectiveness of the proposed methodology,showing improved fault detection accuracy and system reliability in distri-bution network applications.This research provides practical implementation suggestions for TWFL technology in distribution networks.
基金supported in part by the National Natural Science Foundation of China(Grant No.61971291)the Basic Scientific Research Project of the Liaoning Provincial Department of Education(LJ212410144013)+2 种基金the Leading Talent of the‘Xing Liao Ying Cai Plan’(XLYC2202013)the Shenyang Natural Science Foundation(22-315-6-10)the Guangxuan Scholar of Shenyang Ligong University(SYLUGXXZ202205).
文摘With the popularization of smart devices,Location-Based Services(LBS)greatly facilitates users’life,but at the same time brings the risk of users’location privacy leakage.Existing location privacy protection methods are deficient,failing to reasonably allocate the privacy budget for non-outlier location points and ignoring the critical location information that may be contained in the outlier points,leading to decreased data availability and privacy exposure problems.To address these problems,this paper proposes a Mix Location Privacy Preservation Method Based on Differential Privacy with Clustering(MLDP).The method first utilizes the DBSCAN clustering algorithm to classify location points into non-outliers and outliers.For non-outliers,the scoring function is designed by combining geographic information and semantic information,and the privacy budget is allocated according to the heat intensity of the hotspot area;for outliers,the scoring function is constructed to allocate the privacy budget based on their correlation with the hotspot area.By comprehensively considering the geographic information,semantic information,and correlation with hotspot areas of the location points,a reasonable privacy budget is assigned to each location point,andfinallynoise is added throughthe Laplacemechanismto realizeprivacyprotection.Experimental results on tworeal trajectory datasets,Geolife and T-Drive,show that the MLDP approach significantly improves data availability while effectively protecting location privacy.Compared with the comparison methods,the maximum available data ratio of MLDP is 1.Moreover,compared with the RandomNoise method,its execution time is 0.056–0.061 s longer,and the logRE is 0.12951–0.62194 lower;compared with KemeansDP,QTK-DP,DPK-F,IDP-SC,and DPK-Means-up methods,it saves 0.114–0.296 s in execution time,and the logRE is 0.01112–0.38283 lower.
基金co-supported by the National Key Research and Development Program of China(No.2024YFE0107900)the National Natural Science Foundation of China(No.62222105)+1 种基金the Natural Science Foundation of Guangdong Province,China(No.2024A1515010235)the 2024 China Unicom Guangdong low-altitude communication and sensing key technology research and digital twin platform research and development project(No.20241890).
文摘Unmanned aerial vehicle(UAV)swarm network consisting of a collection of micro UAVs can be used for many applications.It is well established that packet routing is a fundamental problem to achieve UAV collaboration.However,the highly dynamic nature of UAVs,frequently changing network topologies and security issues,poses significant challenges to packet forwarding in UAV networks.The existing topology-based routing protocols are not well suited in UAV network due to their high controlling overhead or excessive end-to-end delay.Geographic routing is regarded as a promising solution,as it only requires local information.In order to enhance the accuracy and security of geographic routing in highly dynamic UAV network,in this paper,we propose a new predictive geographic(PGeo)routing strategy with location verification.First,a detection mechanism is adopted to recognize malicious UAVs falsifying their location.Then,an accurate average service time of a packet in the medium access control(MAC)layer is derived to assist location prediction.The proposed delay model can provide a theoretical basis for future work,and our simulation results reveal that PGeo outstrips the existing geographic routing protocols in terms of packet delivery ratio in the presence of location spoofing behavior.
文摘This paper introduces part of the content in the association standard,T/CAAM0002–2020 Nomenclature and Location of Acupuncture Points for Laboratory Animals Part 3:Mouse.This standard was released by the China Association of Acupuncture and Moxibustion on May 15,2020,implemented on October 31,2020,and published by Standards Press of China.The standard was drafted by the Institute of Acupuncture and Moxibustion,China Academy of Chinese Medical Sciences,and the Nanjing University of Chinese Medicine.Principal draftsmen:Xiang-hong JING and Xing-bang HUA.Participating draftsmen:Wan-zhu BAI,Bin XU,Dong-sheng XU,Yi GUO,Tie-ming MA,Xin-jun WANG,and Sheng-feng LU.
文摘This paper introduces part of the content in the association standard,T/CAAM0002–2020 Nomenclature and Location of Acupuncture Points for Laboratory Animals Part 2:Rat.This standard was released by the China Association of Acupuncture and Moxibustion on May 15,2020,implemented on October 31,2020,and published by Standards Press of China.The standard was drafted by the Institute of Acupuncture and Moxibustion,China Academy of Chinese Medical Sciences,and the Nanjing University of Chinese Medicine.Principal draftsmen:Xiang-hong JING and Xing-bang HUA.Participating draftsmen:Wan-Zhu BAI,Bin XU,Dong-sheng XU,Yi GUO,Tie-ming MA,Xin-jun WANG,and Sheng-feng LU.
基金This work was supported by National Natural Science Foundation of China(Grant Nos.61871140,61702223,61702220,61572153,61723022,61601146)and the National Key research and Development Plan(Grant No.2018YFB0803504,2017YFB0803300).
文摘With the evolution of location-based services(LBS),a new type of LBS has already gain a lot of attention and implementation,we name this kind of LBS as the Device-Dependent LBS(DLBS).In DLBS,the service provider(SP)will not only send the information according to the user’s location,more significant,he also provides a service device which will be carried by the user.DLBS has been successfully practised in some of the large cities around the world,for example,the shared bicycle in Beijing and London.In this paper,we,for the first time,blow the whistle of the new location privacy challenges caused by DLBS,since the service device is enabled to perform the localization without the permission of the user.To conquer these threats,we design a service architecture along with a credit system between DLBS provider and the user.The credit system tie together the DLBS device usability with the curious behaviour upon user’s location privacy,DLBS provider has to sacrifice their revenue in order to gain extra location information of their device.We make the simulation of our proposed scheme and the result convince its effectiveness.
文摘Despite advances in surgery,chemotherapy,and radiotherapy,the treatment of colorectal cancer(CRC)requires more personalized approaches based on tumor biology and molecular profiling.While some relevant mutations have been associated with differential response to immunotherapy,such as RAS and BRAF mutations limiting response to anti-epithelial growth factor receptor drugs or microsatellite instability predisposing susceptibility to immune checkpoint inhibitors,the role of inflammation in dictating tumor progression and treatment response is still under investigation.Several inflammatory biomarkers have been identified to guide patient prognosis.These include the neutrophil-lymphocyte ratio,Glasgow prognostic score(GPS)and its modified version,lymphocyte-Creactive protein ratio,and platelet-lymphocyte ratio.However,these markers are not yet included in the standard clinical management of patients with CRC,and further research is needed to evaluate their efficacy in different patient populations.A recent study by Wang et al,published in the World Journal of Gastroenterology,sheds light on the prognostic significance of pan-immune-inflammation value(PIV)in CRC,particularly concerning primary tumor location.Specifically,the authors found that a high PIV was strongly correlated with worse disease-free survival in patients with left-sided colon cancer,whereas no such association was observed in patients with right-sided colon cancer.Integrating tumor location into the prognostic assessment of CRC may improve our ability to more accurately identify high-risk patients and develop personalized treatment plans that are more likely to improve patient outcomes.
基金supported by the National Natural Science Foundation of China(Grant Nos.42371315,41901213)the Humanities and Social Sciences General Research Program of the Ministry of Education(Grant No.23YJC790141)。
文摘Cropland abandonment has been a widespread phenomenon in mountainous areas due to the increasing number of natural disasters and the massive migration of rural labor in the process of rapid urbanization.Land transfer is a crucial prerequisite for ensuring food security and fostering rural revitalization.How to promote land transfer in mountainous areas remains a challenging but important task.Nevertheless,there is a dearth of research examining land transfers among farm households that specifically address mountainous regions,and the influence of grassroots governance and geographic location has not been thoroughly elucidated within this particular context.Based on 895household samples collected in Dabie Mountainous Area in China,this study employs binary and ordinal logistic regression models to provide a more comprehensive analysis on land transfers among rural households and the determinants,including the decision to transfer land,the existence of land transfer rents,the channel of land transfer,the duration of the transfer,the pre-transfer cultivation situation,and the level of satisfaction with the land transfer rent.The findings reveal that grassroots governance,geographic location,livelihood capital,and demographic factors significantly influence land transfers among rural households.Specifically,villagers'public participation positively affects land transfer participation(β=0.235,p<0.05),while the operation of village rules and regulations negatively impacts it(β=-0.296,p<0.05).Village cadre satisfaction positively influences both land transfer rent(β=0.274,p<0.05)and rent satisfaction(β=0.303,p<0.05).Improved civil relations in the village correlate with lower land transfer rent(β=-0.511,p<0.05),while a better social atmosphere is associated with higher satisfaction with transfer rent(β=0.575,p<0.01).Households at higher elevations tend to prefer government-mediated land transfers with longer durations.The distances to the township and county centers have contrasting effects on land transfer rent,but their impacts on participation in land transfer,choice of transfer channel,and duration are consistent.The study also found that different types of livelihood capital,as well as the demographic characteristics of households,significantly affect various aspects of land transfer.These empirical findings can inform policymaking to promote more efficient land transfers in mountainous region.
基金supported by Graduate Research and Innovation Program Project of Nanjing Institute of Technology(No.TB202517078).
文摘The Thyristor-Controlled Series Compensator(TCSC)presents an effective solution for mitigating transmission congestion in power systems by regulating the distribution of line power flow.However,inherent faults within the TCSC may lead to an unintended intensification of transmission congestion in other sections of the system post-installation,resulting in non-coherent phenomena of line blocking.In response to this challenge,this paper introduces a novel two-stage site selectionmethod for TCSC,emphasizing the enhancement of coherence in addressing line-blocking issues.Through rigorous non-coherent verification,this method mitigates the risk of line congestion deterioration due to TCSC faults.In the initial stage of the proposed method,TCSC faults are not considered during the extraction of system states.System state analysis is performed based on the TCSC site selection model,aiming to minimize system load reduction.The preliminary recommended installation position for TCSC is determined by sorting the frequency of TCSC installation occurrences on lines extracted from the analyzed system states.In the subsequent stage,accounting for the influence of TCSC faults on line faults,system operating states are extracted.Line and system congestion indices are calculated through the statistical analysis of the system state analysis results.The installation of TCSC at the preliminary position is scrutinized to identify non-coherent phenomena of line congestion on other lines.If such phenomena are observed,the installation position is excluded,and the TCSC site selection process is reinitiated based on the methodology from the first stage.To validate the effectiveness of the proposed method,a case study is conducted on a modified RBTS test system.The case study results indicate that,compared with TCSC siting schemes that do not consider transmission congestion non-coherency,the proposed non-coherency-based siting scheme reduces the system congestion expectation(SCE)and system congestion probability(SCP)by 17.7%and 11.4%,respectively,while lowering the LOLP and EENS by 2.56% and 4.55%,respectively.These results demonstrate that the proposed method can effectively alleviate transmission congestion and enhance the overall reliability of the system.
文摘Accurate topology information is crucial to management and application in an active low-voltage distribution network(LVDN).Existing topology identification(TI)methods mostly lack a systematic framework to obtain precise hierarchical relations and consumers’segment locations.Their performances are usually deteriorated by introduction of incomplete and tampered smart meter data.To address the problem of TI with penetration of PV prosumers,non-consumption users,and electricity thieves,a data-driven algorithm is proposed via measurements of nodal voltage magnitude and active power,without any prior network information.Inspired by engineering applications of graph theory knowledge,we cast connection problems of LVDN into the solution of adjacency matrices.Up-down and parallel relations of branches are first identified using active power,based on feature extraction of frequency domain filtering and correlation.Correlation factor analysis is subsequently adopted to assign multiple consumers to specific subnetworks,and then consumers’segments are precisely located by combining regression analysis and association strategy.The proposed algorithm is successfully examined on in a complex LVDN,and results show higher robustness under different scenarios.
基金funded by the Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(Grant No.2024ZD1002503)。
文摘Passive microseismic monitoring(PMM)serves as a fundamental technology for assessing hydraulic fracturing(HF)effectiveness,with a key focus on accurate and efficient phase detection/arrival picking and source location.In PMM data processing,the data-driven paradigm(deep learning based)outperforms the model-driven paradigm in characteristic extraction but lacks quality control and uncertainty quantification.Monte Carlo Dropout,a Bayesian uncertainty quantification technique,performs stochastic neuron deactivation through multiple forward propagation samplings.Therefore,this study proposes a deep learning neural network incorporating uncertainty quantification with manual quality control integration,establishing an optimized workflow spanning automated phase detection to robust source location.The methodology implementation comprises two principal components:(1)The MDNet employing Monte Carlo Dropout strategy enabling simultaneous phase detection/arrival picking and unce rtainty estimation;(2)an integrated hybrid-driven workflow with a traveltime-based inve rsion method for source location.Validation with field data demonstrates that MD-Net achieves superior performance under low signal-to-noise ratio conditions,maintaining detection accuracy exceeding 99%for both P-and S-waves.The phase arrival picking precision shows significant improvement,with a 40%reduction in standard deviation compared to the baseline model(P-S time difference decreasing from12.0 ms to 7.1 ms),while providing quantifiable uncertainty metrics for manual calibration.Source location results further reveal that our hybrid-driven workflow produces more physically plausible event distributions,with 100%of microseismic eve nts clustering along the primary fracture expanding direction.This performance surpasses traditional cross-correlation methods and single/multi-trace data-driven me thods in spatial rationality.This study establishes an inte rpretable,high-pre cision automated framework for HF-PMM applications,demonstrating potential for extension to diverse geological settings and monitoring configurations.
基金the support of the China Three Gorges Corporation Science and Technology Fund, with the numbers 0799275the support of the National Natural Science Foundation of China, with the numbers 42174177 and 62106239。
文摘The study area is rich in shale gas resources and has reached the stage of comprehensive development. Shale gas extraction poses risks such as induced seismicity and well closure, compounded by the limited availability of fi xed seismic monitoring stations nearby. To address these challenges, a dense observation array was developed within the study area to monitor and analyze microseismic activity during hydraulic fracturing. Microseismic events generated by hydraulic fracturing typically exhibit low amplitude and signal-to-noise ratio, rendering traditional manual analysis methods impractical. To overcome these limitations, an innovative artifi cial intelligence method combining picking-association-location (PAL) and match-expand- shift-stack (MESS) techniques (PALM) has been utilized for automated seismic detection. Numerous factors influence the accuracy of microseismic detection and localization. To evaluate these factors, the effects of various velocity structure models, instrument types, and station distributions on seismic location were analyzed and compared. The results indicate that the PALM method significantly mitigates the influence of velocity structure models on seismic location accuracy. Additionally, the use of broadband seismic instruments and a uniform station distribution enhances the precision of seismic location results. Furthermore, by integrating data from diff erent types of observation instruments, a comprehensive seismic catalog for the study area was established. These fi ndings not only enhance seismic location accuracy but also provide valuable guidance for optimizing regional seismic monitoring network design and improving seismic risk assessment.
基金supported by the National Key Research and Development Program of China(2023YFC3008605)the Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(311021002)the Seismological Research Foundation for Youths of Guangdong Earthquake Agency(Open Funding Project of Key Laboratory of Earthquake Monitoring and Disaster Mitigation Technology,China Earthquake Administration)(GDDZY202309)。
文摘The travel-time corrections for the primary seismic phases of 72 stations in the Guangdong seismic network,relative to the 1D South China travel-time model,were determined using joint hypocentral determination(JHD)and statistical analysis methods.The travel-time corrections for the Pg phase of 72 stations range between-0.25 s and 0.14 s,while the corrections for the Sg phase range between 0.27 s and 0.35 s,and those for the Pn phase are between-0.86 s and 0.07 s.The spatial distribution of travel-time corrections for Pg,Sg,and Pn phases of 72 stations correlates well with the geological structure in this region.This indicates that the travel-time corrections for Pg and Sg phases are mainly caused by the discrepancy between the actual crustal velocity structure beneath the stations and the 1D South China travel-time model.These corrections empirically compensate for systematic travel-time errors arising from such discrepancies.The primary factor contributing to the travel-time corrections for the Pn phase is the Moho undulations or tilt.These corrections are intended to compensate for systematic errors in travel time caused by variations in the actual Moho.By integrating the obtained travel-time corrections into the HYPO-SAT location algorithm,test results showed an obvious improvement in location accuracy and origin time precision for explosion events.The variation of horizontal distance between repeating earthquake pairs has also improved,with 86%of the repeating earthquake pair spacing being more accurately estimated after correction.This suggests the crucial significance of travel-time correction in earthquake location,and the consideration of travel-time correction exerts a notable impact on enhancing earthquake location accuracy.
基金supported by National Natural Science Foundation of China(Nos.42374076,42174128 and 42004115)Natural Science Foundation for Excellent Young Scholars of Hunan Province,China(No.2022JJ 20057)+1 种基金Central South University Innovation-Driven Research Programme(No.2023CXQD063)the Guangdong Provincial Key Laboratory of Geophysical High-resolution Imaging Technology(No.2022B1212010002).
文摘Seismic source locations can characterize the spatial and temporal distributions of seismic sources,and can provide important basic data for earthquake disaster monitoring,fault activity characterization,and fracture growth interpretation.Waveform stacking-based location methods invert the source locations by focusing the source energy with multichannel waveforms,and these methods exhibit a high level of automation and noise-resistance.Taking the cross-correlation stacking(CCS)method as an example,this work attempts to study the influential factors of waveform stacking-based methods,and introduces a comprehensive performance evaluation scheme based on multiple parameters and indicators.The waveform data are from field monitoring of induced microseismicity in the Changning region(southern Sichuan Basin of China).Synthetic and field data tests reveal the impacts of three categories of factors on waveform stacking-based location:velocity model,monitoring array,and waveform complexity.The location performance is evaluated and further improved in terms of the source imaging resolution and location error.Denser array monitoring contributes to better constraining source depth and location reliability,but the combined impact of multiple factors,such as velocity model uncertainty and multiple seismic phases,increases the complexity of locating field microseismic events.Finally,the aspects of location uncertainty,phase detection,and artificial intelligencebased location are discussed.
基金Supported by Natural Science Foundation of the Science and Technology Commission of Shanghai Municipality,No.23ZR1458300Key Discipline Project of Shanghai Municipal Health System,No.2024ZDXK0004+1 种基金Doctoral Innovation Talent Base Project for Diagnosis and Treatment of Chronic Liver Diseases,No.RCJD2021B02Pujiang Project of Shanghai Magnolia Talent Plan,No.24PJD098.
文摘This letter is a commentary on the findings of Huang et al,who emphasize the prognostic value of tumor location in gastric cancer.Analyzing data from 3287 patients using Kaplan-Meier and multivariate Cox models,the authors found that the tumor location correlated with patient prognosis following surgery.Patients with tumors situated nearer to the stomach’s proximal end were associated with shorter survival periods and poorer outcomes.Notably,gender-based differences in tumor markers,particularly carbohydrate antigen 72-4,further highlight the need for sex-specific influence on the tumor location.Despite increasing recognition of tumor location as a prognostic factor,its role remains unclear in clinical prediction models for various cancers.This letter highlights the potential of incorporating tumor location into artificial intelligence-based prognostic tools to enhance prognostic models.It also outlines a stepwise framework for developing these models,from retrospective training to prospective multicenter validation and clinical implementation.In addition,it addresses the technical,ethical,and interoperability challenges critical to successful real-world prognosis.
文摘This article is adapted from a speech delivered by Dato’Norman Muhamad,Ambassador of Malaysia to China,at the ASEAN-China(Beijing Municipal Administrative Center)Trade and Investment Promotion Conference.The text has been edited for clarity and length.
基金Project(SICGM2023301) supported by the State Key Laboratory of Strata Intelligent Control and Green Mining Co-founded by Shandong Province and the Ministry of Science and Technology,ChinaProject(SMDPC202202) supported by the Key Laboratory of Mining Disaster Prevention and Control,ChinaProject(U21A2030) supported by the National Natural Science Foundation of China。
文摘Microseismic (MS) source location plays an important role in MS monitoring. This paper proposes a MS source location method based on particle swarm optimization (PSO) and multi-sensor arrays, where a free weight joints the P-wave first arrival data. This method adaptively adjusts the preference for “superior” arrays and leverages “inferior” arrays to escape local optima, thereby improving the location accuracy. The effectiveness and stability of this method were validated through synthetic tests, pencil-lead break (PLB) experiments, and mining engineering applications. Specifically, for synthetic tests with 1 μs Gaussian noise and 100 μs large noise in rock samples, the location error of the multi-sensor arrays jointed location method is only 0.30 cm, which improves location accuracy by 97.51% compared to that using a single sensor array. The average location error of PLB events on three surfaces of a rock sample is reduced by 48.95%, 26.40%, and 55.84%, respectively. For mine blast event tests, the average location error of the dual sensor arrays jointed method is 62.74 m, 54.32% and 14.29% lower than that using only sensor arrays 1 and 2, respectively. In summary, the proposed multi-sensor arrays jointed location method demonstrates good noise resistance, stability, and accuracy, providing a compelling new solution for MS location in relevant mining scenarios.
基金financially supported in part by the Natural Science Foundation of Fujian,China,under Grant 2021J01633.
文摘This paper proposes a fingerprint matching method integrating transfer learning and online learning to tackle the challenges of environmental adaptability and dynamic interference resistance in photovoltaic(PV)array DC arc fault location methods based on electromagnetic radiation(EMR)signals.Initially,a comprehensive analysis of the time–frequency characteristics of series arc EMR signals is carried out to pinpoint effective data sources that reflect fault features.Subsequently,a multi-kernel domain-adversarial neural network(MKDANN)is introduced to extract domain-invariant features,and a feature extractor designed specifically for fingerprint matching is devised.To reduce inter-domain distribution differences,a multi-kernel maximum mean discrepancy(MK-MMD)is integrated into the adaptation layer.Moreover,to deal with dynamic environmental changes in real-world situations,the support-class passive aggressive(SPA)algorithm is utilized to adjust model parameters in real time.Finally,MKDANN and SPA technologies are smoothly combined to build a fully operational fault location model.Experimental results indicate that the proposed method attains an overall fault location accuracy of at least 95%,showing strong adaptability to environmental changes and robust interference resistance while maintaining excellent online learning capabilities during model migration.
