Localized nature of damage in structures requires local measurements for structural health monitoring. The local measurement means to measure the local, usually higher modes of the vibration in a structure. Three fund...Localized nature of damage in structures requires local measurements for structural health monitoring. The local measurement means to measure the local, usually higher modes of the vibration in a structure. Three fundamental issues about the local measurement for structural health monitoring including (1) the necessity of making local measurement, (2) the difficulty of making local measurement and (3) how to make local measurement are addressed in this paper. The results from both the analysis and the tests show that the local measurement can successfully monitor the structural health status as long as the local modes are excited. Unfortunately, the results also illustrate that it is difficult to excite local modes in a structure. Therefore, in order to carry structural health monitoring into effect, we must (1) ensure that the local modes are excited, and (2) deploy enough sensors in a structure so that the local modes can be monitored.展开更多
As the radio communications technology widely used,wireless location technology plays a more important role in maintaining the order of the air waves.However concretely effective symbol calibration method with regard ...As the radio communications technology widely used,wireless location technology plays a more important role in maintaining the order of the air waves.However concretely effective symbol calibration method with regard to Chinese DTMB signal of different frame mode is quite under research due to the multiple structure of DTMB signal.In this paper,we propose a Time Difference of Arrival(TDOA)-based passive location scheme using least square principle.Utilizing the large number of anchor nodes in wireless monitoring network,a novel algorithm is formulated to solve the None-LineOf-Sight problem.The derived Cramer Rao Lower Bound of the localization method guides to the accuracy of the position outcome with regards to the calibration precision.In contrast with traditional multi-terminal location schemes,our location scheme can reduce calculation complexity and location costs abruptly.A twostep NLOS identification algorithm is proposed.Computer simulation is employed to verify the well performance of the calibration method of3-4 dB superiority than normal method and also the whole localization scheme for less than 50 meters through channel of SNR lower than dB.Simulation also shows that our algorithm can effectively identify NLOS path and improve positioning accuracy.展开更多
There are multiple operating modes in the real industrial process, and the collected data follow the complex multimodal distribution, so most traditional process monitoring methods are no longer applicable because the...There are multiple operating modes in the real industrial process, and the collected data follow the complex multimodal distribution, so most traditional process monitoring methods are no longer applicable because their presumptions are that sampled-data should obey the single Gaussian distribution or non-Gaussian distribution. In order to solve these problems, a novel weighted local standardization(WLS) strategy is proposed to standardize the multimodal data, which can eliminate the multi-mode characteristics of the collected data, and normalize them into unimodal data distribution. After detailed analysis of the raised data preprocessing strategy, a new algorithm using WLS strategy with support vector data description(SVDD) is put forward to apply for multi-mode monitoring process. Unlike the strategy of building multiple local models, the developed method only contains a model without the prior knowledge of multi-mode process. To demonstrate the proposed method's validity, it is applied to a numerical example and a Tennessee Eastman(TE) process. Finally, the simulation results show that the WLS strategy is very effective to standardize multimodal data, and the WLS-SVDD monitoring method has great advantages over the traditional SVDD and PCA combined with a local standardization strategy(LNS-PCA) in multi-mode process monitoring.展开更多
Wireless Sensor Networks for Rainfall Monitoring (RM-WSNs) is a sensor network for the large-scale regional and moving rainfall monitoring,which could be controlled deployment. Delivery delay and cross-cluster calcula...Wireless Sensor Networks for Rainfall Monitoring (RM-WSNs) is a sensor network for the large-scale regional and moving rainfall monitoring,which could be controlled deployment. Delivery delay and cross-cluster calculation leads to information inaccuracy by the existing dynamic collabo-rative self-organization algorithm in WSNs. In this letter,a Local Dynamic Cluster Self-organization algorithm (LDCS) is proposed for the large-scale regional and moving target monitoring in RM-WSNs. The algorithm utilizes the resource-rich node in WSNs as the cluster head,which processes target information obtained by sensor nodes in cluster. The cluster head shifts with the target moving in chance and re-groups a new cluster. The target information acquisition is limited in the dynamic cluster,which can reduce information across-clusters transfer delay and improve the real-time of information acquisition. The simulation results show that,LDCS can not only relieve the problem of "too frequent leader switches" in IDSQ,also make full use of the history monitoring information of target and con-tinuous monitoring of sensor nodes that failed in DCS.展开更多
In soft sensor field, just-in-time learning(JITL) is an effective approach to model nonlinear and time varying processes. However, most similarity criterions in JITL are computed in the input space only while ignoring...In soft sensor field, just-in-time learning(JITL) is an effective approach to model nonlinear and time varying processes. However, most similarity criterions in JITL are computed in the input space only while ignoring important output information, which may lead to inaccurate construction of relevant sample set. To solve this problem, we propose a novel supervised feature extraction method suitable for the regression problem called supervised local and non-local structure preserving projections(SLNSPP), in which both input and output information can be easily and effectively incorporated through a newly defined similarity index. The SLNSPP can not only retain the virtue of locality preserving projections but also prevent faraway points from nearing after projection,which endues SLNSPP with powerful discriminating ability. Such two good properties of SLNSPP are desirable for JITL as they are expected to enhance the accuracy of similar sample selection. Consequently, we present a SLNSPP-JITL framework for developing adaptive soft sensor, including a sparse learning strategy to limit the scale and update the frequency of database. Finally, two case studies are conducted with benchmark datasets to evaluate the performance of the proposed schemes. The results demonstrate the effectiveness of LNSPP and SLNSPP.展开更多
Complex processes often work with multiple operation regions, it is critical to develop effective monitoring approaches to ensure the safety of chemical processes. In this work, a discriminant local consistency Gaussi...Complex processes often work with multiple operation regions, it is critical to develop effective monitoring approaches to ensure the safety of chemical processes. In this work, a discriminant local consistency Gaussian mixture model(DLCGMM) for multimode process monitoring is proposed for multimode process monitoring by integrating LCGMM with modified local Fisher discriminant analysis(MLFDA). Different from Fisher discriminant analysis(FDA) that aims to discover the global optimal discriminant directions, MLFDA is capable of uncovering multimodality and local structure of the data by exploiting the posterior probabilities of observations within clusters calculated from the results of LCGMM. This may enable MLFDA to capture more meaningful discriminant information hidden in the high-dimensional multimode observations comparing to FDA. Contrary to most existing multimode process monitoring approaches, DLCGMM performs LCGMM and MFLDA iteratively, and the optimal subspaces with multi-Gaussianity and the optimal discriminant projection vectors are simultaneously achieved in the framework of supervised and unsupervised learning. Furthermore, monitoring statistics are established on each cluster that represents a specific operation condition and two global Bayesian inference-based fault monitoring indexes are established by combining with all the monitoring results of all clusters. The efficiency and effectiveness of the proposed method are evaluated through UCI datasets, a simulated multimode model and the Tennessee Eastman benchmark process.展开更多
In this paper we present a comparative analysis of global frequency and local deformation data for a large concrete bridge. The asymptotic probability distributions of the central statistics are presented, and compare...In this paper we present a comparative analysis of global frequency and local deformation data for a large concrete bridge. The asymptotic probability distributions of the central statistics are presented, and compared with empirical bootstrap estimates. Bootstrapped distributions are calculated from reference data obtained during 1999–2000 and used to develop change-point alarm criteria for the structure, using reasonable sensitivity measures developed from FEM simulations and structural analysis. The implications of the frequency data are discussed in conjunction with the strain and displacement measurements in order to discern if the load carrying capacity of the bridge has been affected. The critical need for more advanced temperature compensation models for large structures continually in thermal disequilibrium is discussed.展开更多
Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation ne...Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation neural network(BPNN)algorithm,are proposed to identify the loading positions individually.The feasibility of the suggested methods is evaluated through an experimental program on a carbon fiber reinforced plastic laminate.The experimental tests involve in application of four optical fiber-based sensors for strain measurement at discrete points.The sensors are specially designed fiber Bragg grating(FBG)in small diameter.The small-diameter FBG sensors are arrayed in 2-D on the laminate surface.The testing results indicate that the loading position could be detected by the proposed method.Using SVM method,the 2-D FBG sensors can approximate the loading location with maximum error less than 14 mm.However,the maximum localization error could be limited to about 1 mm by applying the BPNN algorithm.It is mainly because the convergence conditions(mean square error)can be set in advance,while SVM cannot.展开更多
Structure health monitoring based on diagnostic Lamb waves has been found to be one of the most promising techniques recently. This paper has a brief review of the new developments on this method including the basic n...Structure health monitoring based on diagnostic Lamb waves has been found to be one of the most promising techniques recently. This paper has a brief review of the new developments on this method including the basic novel of the method, fundamentals and mathematics of Lamb wave propagation, narrowband and wideband Lamb wave excitation methods, optimization of excitation factors and diagnostic Lamb wave interpretation methods.展开更多
In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independen...In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independent method, and in the feature extraction there is not fully taken into account the characterization of fault information, it will make the process monitoring ineffective, so a fault monitoring method based on WGNPE(weighted global neighborhood preserving embedding)–GSVDD(greedy support vector data description) related and independent variables is proposed. First, mutual information method is used to separate the related variables and independent variables. Secondly, WGNPE method is used to extract the local and global structures of the related variables in batch process and highlight the fault information, GSVDD method is used to extract the process information of the independent variables quickly and effectively. Finally, the statistical monitoring model is established to achieve process monitoring based on WGNPE and GSVDD. The effectiveness of the proposed method was verified by the penicillin fermentation process.展开更多
The concept of health monitoring is a key aspect of the field of medicine that has been practiced for a long time. A commonly used diagnostic and health monitoring practice is pulse diagnosis, which can be traced back...The concept of health monitoring is a key aspect of the field of medicine that has been practiced for a long time. A commonly used diagnostic and health monitoring practice is pulse diagnosis, which can be traced back approximately five thousand years in the recorded history of China. With advances in the development of modern technology, the concept of health monitoring of a variety of engineering structures in several applications has begun to attract widespread attention. Of particular interest in this study is the health monitoring of civil structures. It seem natural, and even beneficial, that these two health-monitoring methods, one as applies to the human body and the other to civil structures, should be analyzed and compared. In this paper, the basic concepts and theories of the two monitoring methods are first discussed. Similarities are then summarized and commented upon. It is hoped that this correlation analysis may help provide structural engineers with some insights into the intrinsic concept of using pulse diagnosis in human health monitoring, which may of be some benefit in the development of modern structural health monitoring methods.展开更多
With the development of imaging and localization studies,focused parathyroidectomy with use of intraope-rative parathormone monitoring(IPM)is the mainstay of treatment for primary hyperparathyroidism at many health ca...With the development of imaging and localization studies,focused parathyroidectomy with use of intraope-rative parathormone monitoring(IPM)is the mainstay of treatment for primary hyperparathyroidism at many health care centers both nationally and internationally.Focused parathyroidectomy guided by IPM allows for surgical excision of the offending parathyroid gland through smaller incisions.The Miami criterion is a protocol that uses a">50%parathormone(PTH)drop"from either the greatest pre-incision or pre-excision measurement of PTH in a blood sample taken 10 min following resection of hyperfunctioning glands.Following removal of the hyperfunctioning parathyroid gland,a>50%PTH drop at 10 min indicates completion of parathyroidectomy,and predicts operative success at6 mo.IPM using the Miami criterion has demonstrated equal curative rates of>97%,which is comparable to the traditional bilateral neck exploration.The focused approach,however,is associated with shorter recovery times,improved cosmesis,and lower risk of postoperative hypocalcemia.展开更多
文摘Localized nature of damage in structures requires local measurements for structural health monitoring. The local measurement means to measure the local, usually higher modes of the vibration in a structure. Three fundamental issues about the local measurement for structural health monitoring including (1) the necessity of making local measurement, (2) the difficulty of making local measurement and (3) how to make local measurement are addressed in this paper. The results from both the analysis and the tests show that the local measurement can successfully monitor the structural health status as long as the local modes are excited. Unfortunately, the results also illustrate that it is difficult to excite local modes in a structure. Therefore, in order to carry structural health monitoring into effect, we must (1) ensure that the local modes are excited, and (2) deploy enough sensors in a structure so that the local modes can be monitored.
基金supported by National BeiDou Special ProjectNational Science & Technology planning project of China(Grant No. 2014BAK12B04)
文摘As the radio communications technology widely used,wireless location technology plays a more important role in maintaining the order of the air waves.However concretely effective symbol calibration method with regard to Chinese DTMB signal of different frame mode is quite under research due to the multiple structure of DTMB signal.In this paper,we propose a Time Difference of Arrival(TDOA)-based passive location scheme using least square principle.Utilizing the large number of anchor nodes in wireless monitoring network,a novel algorithm is formulated to solve the None-LineOf-Sight problem.The derived Cramer Rao Lower Bound of the localization method guides to the accuracy of the position outcome with regards to the calibration precision.In contrast with traditional multi-terminal location schemes,our location scheme can reduce calculation complexity and location costs abruptly.A twostep NLOS identification algorithm is proposed.Computer simulation is employed to verify the well performance of the calibration method of3-4 dB superiority than normal method and also the whole localization scheme for less than 50 meters through channel of SNR lower than dB.Simulation also shows that our algorithm can effectively identify NLOS path and improve positioning accuracy.
基金Project(61374140)supported by the National Natural Science Foundation of China
文摘There are multiple operating modes in the real industrial process, and the collected data follow the complex multimodal distribution, so most traditional process monitoring methods are no longer applicable because their presumptions are that sampled-data should obey the single Gaussian distribution or non-Gaussian distribution. In order to solve these problems, a novel weighted local standardization(WLS) strategy is proposed to standardize the multimodal data, which can eliminate the multi-mode characteristics of the collected data, and normalize them into unimodal data distribution. After detailed analysis of the raised data preprocessing strategy, a new algorithm using WLS strategy with support vector data description(SVDD) is put forward to apply for multi-mode monitoring process. Unlike the strategy of building multiple local models, the developed method only contains a model without the prior knowledge of multi-mode process. To demonstrate the proposed method's validity, it is applied to a numerical example and a Tennessee Eastman(TE) process. Finally, the simulation results show that the WLS strategy is very effective to standardize multimodal data, and the WLS-SVDD monitoring method has great advantages over the traditional SVDD and PCA combined with a local standardization strategy(LNS-PCA) in multi-mode process monitoring.
基金Supported by the Key Projection of Science and Technology Research of Ministry of Education of China (107057)the Science & Technology Fund for Students of Hohai University (K200803)
文摘Wireless Sensor Networks for Rainfall Monitoring (RM-WSNs) is a sensor network for the large-scale regional and moving rainfall monitoring,which could be controlled deployment. Delivery delay and cross-cluster calculation leads to information inaccuracy by the existing dynamic collabo-rative self-organization algorithm in WSNs. In this letter,a Local Dynamic Cluster Self-organization algorithm (LDCS) is proposed for the large-scale regional and moving target monitoring in RM-WSNs. The algorithm utilizes the resource-rich node in WSNs as the cluster head,which processes target information obtained by sensor nodes in cluster. The cluster head shifts with the target moving in chance and re-groups a new cluster. The target information acquisition is limited in the dynamic cluster,which can reduce information across-clusters transfer delay and improve the real-time of information acquisition. The simulation results show that,LDCS can not only relieve the problem of "too frequent leader switches" in IDSQ,also make full use of the history monitoring information of target and con-tinuous monitoring of sensor nodes that failed in DCS.
基金Supported by the National Natural Science Foundation of China(61273160)the Fundamental Research Funds for the Central Universities(14CX06067A,13CX05021A)
文摘In soft sensor field, just-in-time learning(JITL) is an effective approach to model nonlinear and time varying processes. However, most similarity criterions in JITL are computed in the input space only while ignoring important output information, which may lead to inaccurate construction of relevant sample set. To solve this problem, we propose a novel supervised feature extraction method suitable for the regression problem called supervised local and non-local structure preserving projections(SLNSPP), in which both input and output information can be easily and effectively incorporated through a newly defined similarity index. The SLNSPP can not only retain the virtue of locality preserving projections but also prevent faraway points from nearing after projection,which endues SLNSPP with powerful discriminating ability. Such two good properties of SLNSPP are desirable for JITL as they are expected to enhance the accuracy of similar sample selection. Consequently, we present a SLNSPP-JITL framework for developing adaptive soft sensor, including a sparse learning strategy to limit the scale and update the frequency of database. Finally, two case studies are conducted with benchmark datasets to evaluate the performance of the proposed schemes. The results demonstrate the effectiveness of LNSPP and SLNSPP.
基金Supported by the National Natural Science Foundation of China(61273167)
文摘Complex processes often work with multiple operation regions, it is critical to develop effective monitoring approaches to ensure the safety of chemical processes. In this work, a discriminant local consistency Gaussian mixture model(DLCGMM) for multimode process monitoring is proposed for multimode process monitoring by integrating LCGMM with modified local Fisher discriminant analysis(MLFDA). Different from Fisher discriminant analysis(FDA) that aims to discover the global optimal discriminant directions, MLFDA is capable of uncovering multimodality and local structure of the data by exploiting the posterior probabilities of observations within clusters calculated from the results of LCGMM. This may enable MLFDA to capture more meaningful discriminant information hidden in the high-dimensional multimode observations comparing to FDA. Contrary to most existing multimode process monitoring approaches, DLCGMM performs LCGMM and MFLDA iteratively, and the optimal subspaces with multi-Gaussianity and the optimal discriminant projection vectors are simultaneously achieved in the framework of supervised and unsupervised learning. Furthermore, monitoring statistics are established on each cluster that represents a specific operation condition and two global Bayesian inference-based fault monitoring indexes are established by combining with all the monitoring results of all clusters. The efficiency and effectiveness of the proposed method are evaluated through UCI datasets, a simulated multimode model and the Tennessee Eastman benchmark process.
基金the Illinois Department of TransportationAdditional assistance provided by Smart Structures Int
文摘In this paper we present a comparative analysis of global frequency and local deformation data for a large concrete bridge. The asymptotic probability distributions of the central statistics are presented, and compared with empirical bootstrap estimates. Bootstrapped distributions are calculated from reference data obtained during 1999–2000 and used to develop change-point alarm criteria for the structure, using reasonable sensitivity measures developed from FEM simulations and structural analysis. The implications of the frequency data are discussed in conjunction with the strain and displacement measurements in order to discern if the load carrying capacity of the bridge has been affected. The critical need for more advanced temperature compensation models for large structures continually in thermal disequilibrium is discussed.
基金supported by the National Natural Science Foundation of China(Nos.11402112,51405223)
文摘Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation neural network(BPNN)algorithm,are proposed to identify the loading positions individually.The feasibility of the suggested methods is evaluated through an experimental program on a carbon fiber reinforced plastic laminate.The experimental tests involve in application of four optical fiber-based sensors for strain measurement at discrete points.The sensors are specially designed fiber Bragg grating(FBG)in small diameter.The small-diameter FBG sensors are arrayed in 2-D on the laminate surface.The testing results indicate that the loading position could be detected by the proposed method.Using SVM method,the 2-D FBG sensors can approximate the loading location with maximum error less than 14 mm.However,the maximum localization error could be limited to about 1 mm by applying the BPNN algorithm.It is mainly because the convergence conditions(mean square error)can be set in advance,while SVM cannot.
基金The authors acknowledge the financial supports from the National Natural Science Foundation of China under grant No.90305005,50135030
文摘Structure health monitoring based on diagnostic Lamb waves has been found to be one of the most promising techniques recently. This paper has a brief review of the new developments on this method including the basic novel of the method, fundamentals and mathematics of Lamb wave propagation, narrowband and wideband Lamb wave excitation methods, optimization of excitation factors and diagnostic Lamb wave interpretation methods.
基金Supported by the National Natural Science Foundation of China(No.61763029)the Natural Science Foundation of Gansu Province(1610RJZA016)
文摘In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independent method, and in the feature extraction there is not fully taken into account the characterization of fault information, it will make the process monitoring ineffective, so a fault monitoring method based on WGNPE(weighted global neighborhood preserving embedding)–GSVDD(greedy support vector data description) related and independent variables is proposed. First, mutual information method is used to separate the related variables and independent variables. Secondly, WGNPE method is used to extract the local and global structures of the related variables in batch process and highlight the fault information, GSVDD method is used to extract the process information of the independent variables quickly and effectively. Finally, the statistical monitoring model is established to achieve process monitoring based on WGNPE and GSVDD. The effectiveness of the proposed method was verified by the penicillin fermentation process.
基金the National Science Foundation through the International Collaboration Supplement of Grant No.CMS-0202320the HongKong Research Grants Council via the Competitive Earmarked Research Grant HKUST6220/01E
文摘The concept of health monitoring is a key aspect of the field of medicine that has been practiced for a long time. A commonly used diagnostic and health monitoring practice is pulse diagnosis, which can be traced back approximately five thousand years in the recorded history of China. With advances in the development of modern technology, the concept of health monitoring of a variety of engineering structures in several applications has begun to attract widespread attention. Of particular interest in this study is the health monitoring of civil structures. It seem natural, and even beneficial, that these two health-monitoring methods, one as applies to the human body and the other to civil structures, should be analyzed and compared. In this paper, the basic concepts and theories of the two monitoring methods are first discussed. Similarities are then summarized and commented upon. It is hoped that this correlation analysis may help provide structural engineers with some insights into the intrinsic concept of using pulse diagnosis in human health monitoring, which may of be some benefit in the development of modern structural health monitoring methods.
文摘With the development of imaging and localization studies,focused parathyroidectomy with use of intraope-rative parathormone monitoring(IPM)is the mainstay of treatment for primary hyperparathyroidism at many health care centers both nationally and internationally.Focused parathyroidectomy guided by IPM allows for surgical excision of the offending parathyroid gland through smaller incisions.The Miami criterion is a protocol that uses a">50%parathormone(PTH)drop"from either the greatest pre-incision or pre-excision measurement of PTH in a blood sample taken 10 min following resection of hyperfunctioning glands.Following removal of the hyperfunctioning parathyroid gland,a>50%PTH drop at 10 min indicates completion of parathyroidectomy,and predicts operative success at6 mo.IPM using the Miami criterion has demonstrated equal curative rates of>97%,which is comparable to the traditional bilateral neck exploration.The focused approach,however,is associated with shorter recovery times,improved cosmesis,and lower risk of postoperative hypocalcemia.
