With the popularization and application of fast drilling technology in Sichuan-Chongqing gas provinces,the returned cuttings are fine and even powdered,so the traditional cutting lithology identification methods are n...With the popularization and application of fast drilling technology in Sichuan-Chongqing gas provinces,the returned cuttings are fine and even powdered,so the traditional cutting lithology identification methods are not applicable any longer.In this paper,qualitative lithology identification and quantitative interpretation based on element logging were conducted on the key oil and gas bearing layers in this area according to the principle of elemental geochemistry.The study results show that:(1)different lithologies can be identified easily because of their different element logging characteristics.For example,basalts have the element characteristics of 0.35<Fe/Si<0.55 and Ca/(Na+K)<4.00,while sedimentary rocks have Fe/Si<0.35 or>0.55.(2)Clastic rocks,carbonate rocks,sulphate and transition rocks in the category of sedimentary rocks can be identified based on the element combination of(Al+Si+Fe)and(Ca+Mg+S).Among them,clastic rocks have(Al+Si+Fe)>31%,carbonate rocks have(Al+Si+Fe)<8%and(Ca+Mg+S)<36%,and sulphate rocks have(Al+Si+Fe)<5%and(Ca+Mg+S)>36%.(3)Then,based on the element combination of(Si+K+Ca)tSi/Al and(Al+Si+Fe+K)t(Ca+S)/Mg,sandstone,mudstone(shale),gypsum,dolomite,limestone and transition rocks can be identified.Finally,a qualitative identification chart and a set of quantitative interpretation software of element logging on key horizons in Sichuan-Chongqing gas provinces were developed to make this method convenient for field application.This method was applied on site in ten wells(such as Well MX207)in Sichuan-Chongqing gas provinces.It is indicated that the coincidence rate of lithology identification is in the range of 88.75-95.22%(averaging 92.42%).Obviously,it can satisfy the requirements of fast lithology identification while drilling of key oil and gas horizons in Sichuan-Chongqing gas provinces.展开更多
In petroleum engineering,real-time lithology identification is very important for reservoir evaluation,drilling decisions and petroleum geological exploration.A lithology identification method while drilling based on ...In petroleum engineering,real-time lithology identification is very important for reservoir evaluation,drilling decisions and petroleum geological exploration.A lithology identification method while drilling based on machine learning and mud logging data is studied in this paper.This method can effectively utilize downhole parameters collected in real-time during drilling,to identify lithology in real-time and provide a reference for optimization of drilling parameters.Given the imbalance of lithology samples,the synthetic minority over-sampling technique(SMOTE)and Tomek link were used to balance the sample number of five lithologies.Meanwhile,this paper introduces Tent map,random opposition-based learning and dynamic perceived probability to the original crow search algorithm(CSA),and establishes an improved crow search algorithm(ICSA).In this paper,ICSA is used to optimize the hyperparameter combination of random forest(RF),extremely random trees(ET),extreme gradient boosting(XGB),and light gradient boosting machine(LGBM)models.In addition,this study combines the recognition advantages of the four models.The accuracy of lithology identification by the weighted average probability model reaches 0.877.The study of this paper realizes high-precision real-time lithology identification method,which can provide lithology reference for the drilling process.展开更多
Bayesian-optimized lithology identification has important basic geological research significance and engineering application value,and this paper proposes a Bayesian-optimized lithology identification method based on ...Bayesian-optimized lithology identification has important basic geological research significance and engineering application value,and this paper proposes a Bayesian-optimized lithology identification method based on machine learning of rock visible and near-infrared spectral data.First,the rock spectral data are preprocessed using Savitzky-Golay(SG)smoothing to remove the noise of the spectral data;then,the preprocessed rock spectral data are downscaled using Principal Component Analysis(PCA)to reduce the redundancy of the data,optimize the effective discriminative information,and obtain the rock spectral features;finally,a Bayesian-optimized lithology identification model is established based on rock spectral features,optimize the model hyperparameters using Bayesian optimization(BO)algorithm to avoid the combination of hyperparameters falling into the local optimal solution,and output the predicted type of rock,so as to realize the Bayesian-optimized lithology identification.In addition,this paper conducts comparative analysis on models based on Artificial Neural Network(ANN)/Random Forest(RF),dimensionality reduction/full band,and optimization algorithms.It uses the confusion matrix,accuracy,Precison(P),Recall(R)and F_(1)values(F_(1))as the evaluation indexes of model accuracy.The results indicate that the lithology identification model optimized by the BO-ANN after dimensionality reduction achieves an accuracy of up to 99.80%,up to 99.79%and up to 99.79%.Compared with the BO-RF model,it has higher identification accuracy and better stability for each type of rock identification.The experiments and reliability analysis show that the Bayesian-optimized lithology identification method proposed in this paper has good robustness and generalization performance,which is of great significance for realizing fast,accurate and Bayesian-optimized lithology identification in tunnel site.展开更多
Lithology identification is a critical aspect of geoenergy exploration,including geothermal energy development,gas hydrate extraction,and gas storage.In recent years,artificial intelligence techniques based on drill c...Lithology identification is a critical aspect of geoenergy exploration,including geothermal energy development,gas hydrate extraction,and gas storage.In recent years,artificial intelligence techniques based on drill core images have made significant strides in lithology identification,achieving high accuracy.However,the current demand for advanced lithology identification models remains unmet due to the lack of high-quality drill core image datasets.This study successfully constructs and publicly releases the first open-source Drill Core Image Dataset(DCID),addressing the need for large-scale,high-quality datasets in lithology characterization tasks within geological engineering and establishing a standard dataset for model evaluation.DCID consists of 35 lithology categories and a total of 98,000 high-resolution images(512×512 pixels),making it the most comprehensive drill core image dataset in terms of lithology categories,image quantity,and resolution.This study also provides lithology identification accuracy benchmarks for popular convolutional neural networks(CNNs)such as VGG,ResNet,DenseNet,MobileNet,as well as for the Vision Transformer(ViT)and MLP-Mixer,based on DCID.Additionally,the sensitivity of model performance to various parameters and image resolution is evaluated.In response to real-world challenges,we propose a real-world data augmentation(RWDA)method,leveraging slightly defective images from DCID to enhance model robustness.The study also explores the impact of real-world lighting conditions on the performance of lithology identification models.Finally,we demonstrate how to rapidly evaluate model performance across multiple dimensions using low-resolution datasets,advancing the application and development of new lithology identification models for geoenergy exploration.展开更多
Real-time intelligent lithology identification while drilling is vital to realizing downhole closed-loop drilling. The complex and changeable geological environment in the drilling makes lithology identification face ...Real-time intelligent lithology identification while drilling is vital to realizing downhole closed-loop drilling. The complex and changeable geological environment in the drilling makes lithology identification face many challenges. This paper studies the problems of difficult feature information extraction,low precision of thin-layer identification and limited applicability of the model in intelligent lithologic identification. The author tries to improve the comprehensive performance of the lithology identification model from three aspects: data feature extraction, class balance, and model design. A new real-time intelligent lithology identification model of dynamic felling strategy weighted random forest algorithm(DFW-RF) is proposed. According to the feature selection results, gamma ray and 2 MHz phase resistivity are the logging while drilling(LWD) parameters that significantly influence lithology identification. The comprehensive performance of the DFW-RF lithology identification model has been verified in the application of 3 wells in different areas. By comparing the prediction results of five typical lithology identification algorithms, the DFW-RF model has a higher lithology identification accuracy rate and F1 score. This model improves the identification accuracy of thin-layer lithology and is effective and feasible in different geological environments. The DFW-RF model plays a truly efficient role in the realtime intelligent identification of lithologic information in closed-loop drilling and has greater applicability, which is worthy of being widely used in logging interpretation.展开更多
The Paleogene Shahejie Formation in the KL16 oilfield, Bohai bay, is characterized by a thinly interbedded mixed sedimentary system, with complex sedimentary facies, lithologic types and distributions. It is hard for ...The Paleogene Shahejie Formation in the KL16 oilfield, Bohai bay, is characterized by a thinly interbedded mixed sedimentary system, with complex sedimentary facies, lithologic types and distributions. It is hard for conventional logging methods to identify the lithology therein. In order to solve the difficulty in lithologic identification of mixed sedimentary system, analyses based on graph data base using elemental capture energy spectrum log have been proposed. Due to the different composition for the various minerals, we innovatively established the molar numbers of silicon, calcium, magnesium, and aluminum as characteristic parameters for sandstone, limestone, dolomite, and mudstone, and a graph clustering analysis method was applied to identify lithology. Considering the seismic waveforms corresponding to lithologic impedance of reservoir, three seismic phases were identified by neural network clustering analysis of seismic waveform, and the seismic attributes with high sensitivity to reservoir thickness were then selected to realize the fine description of the mixed carbonate-siliciclastic reservoir. Drilling results confirmed that the sedimentary facies were accurately identified, with reservoir prediction accuracy reaching up to 80%. Under the guidance of reservoir research, the oil-in-place discovered in the oilfield were estimated to be more than 5 million tonnes. This technology provides reference for the exploration and development of oilfields of mixed sedimentary system.展开更多
Identification of stratigraphic interfaces and lithology is a key aspect in geological and geotechnical investigations.In this study,a monitoring while-drilling system was developed,along with a corresponding data pre...Identification of stratigraphic interfaces and lithology is a key aspect in geological and geotechnical investigations.In this study,a monitoring while-drilling system was developed,along with a corresponding data pre-processing method.The method can handle invalid drilling data generated during manual operations.The correlation between various drilling parameters was analyzed,and a database of stratigraphic interfaces and key lithology identification based on the monitoring parameters was established.The average drilling speed was found to be the most suitable parameter for stratigraphic and lithology identification,and when the average drilling speed varied over a wide range,it corresponded to a stratigraphic interface.The average drilling speeds in sandy mudstone and sandstone strata were in the ranges of 0.1e0.2 m/min and 0.2e0.29 m/min,respectively.The results obtained using the present method were consistent with geotechnical survey results.The proposed method can be used for realtime lithology identification and represents a novel approach for intelligent geotechnical surveying.展开更多
This study for the first time demonstrates that some of the so-called clay-sized mudstones observed by the naked eye,such as clay-sized black mudstones and clay-sized oil shales,which are rich in black organic matter(...This study for the first time demonstrates that some of the so-called clay-sized mudstones observed by the naked eye,such as clay-sized black mudstones and clay-sized oil shales,which are rich in black organic matter(including oil and asphaltene),in the Chang 73 Submember of the Upper Triassic Yanchang Formation in the Ordos Basin of China are actually clay-sized tuffaceous rocks(including tuff,sedimentary tuff and tuffaceous sedimentary rock)with high hydrocarbon generation capacities.Thus,these rocks can be defined as clay-sized tuffaceous source rocks.Identification of this lithology has important theoretical and practical significance for the exploration and development of shale oil in the Chang 7 Member.Through the macroscopic observation of drill cores and outcrop profiles,microscopic observation of electron probe thin sections and whole-rock inorganic geochemical analysis(including major,trace and rare earth elements),this work demonstrates that the organic matter-rich clay-sized tuffaceous rocks,especially clay-sized tuffs,have the following characteristics.First,the clay-sized tuffaceous rocks with little black organic matter are mainly greyish white,yellowish brown and purplish grey,and mixed colors occur in areas with strong bentonite lithification.Second,the clay-sized tuffaceous rocks have experienced strong devitrification and recrystallization,forming abundant flaky aluminosilicate minerals with directional arrangement.In thin sections under a polarizing microscope,the interference colors generally show regular alternation between the lowest interference color of first-order yellow and the highest interference color of second-order blue-green.Third,the rock samples plot in the igneous rock field in the TiO2-SiO2 cross-plot and exhibit similar trace element and rare earth element patterns on spider diagrams,indicating that the samples are derived from the same source.The results prove that clay-sized tuffaceous rocks may be widespread in the Chang 73 Submember of the Upper Triassic Yanchang Formation in the Ordos Basin,China.展开更多
An intelligent lithology identification method is proposed based on deep learning of the rock microscopic images.Based on the characteristics of rock images in the dataset,we used Xception,MobileNet_v2,Inception_ResNe...An intelligent lithology identification method is proposed based on deep learning of the rock microscopic images.Based on the characteristics of rock images in the dataset,we used Xception,MobileNet_v2,Inception_ResNet_v2,Inception_v3,Densenet121,ResNet101_v2,and ResNet-101 to develop microscopic image classification models,and then the network structures of seven different convolutional neural networks(CNNs)were compared.It shows that the multi-layer representation of rock features can be represented through convolution structures,thus better feature robustness can be achieved.For the loss function,cross-entropy is used to back propagate the weight parameters layer by layer,and the accuracy of the network is improved by frequent iterative training.We expanded a self-built dataset by using transfer learning and data augmentation.Next,accuracy(acc)and frames per second(fps)were used as the evaluation indexes to assess the accuracy and speed of model identification.The results show that the Xception-based model has the optimum performance,with an accuracy of 97.66%in the training dataset and 98.65%in the testing dataset.Furthermore,the fps of the model is 50.76,and the model is feasible to deploy under different hardware conditions and meets the requirements of rapid lithology identification.This proposed method is proved to be robust and versatile in generalization performance,and it is suitable for both geologists and engineers to identify lithology quickly.展开更多
In order to obtain effective parameters for complex sand reservoirs,a log evaluation method for relevant reservoir parameters is established based on an analysis in the gas-bearing sandstone with high porosity and low...In order to obtain effective parameters for complex sand reservoirs,a log evaluation method for relevant reservoir parameters is established based on an analysis in the gas-bearing sandstone with high porosity and low permeability,low porosity and permeability and on various characteristics of log responses to reservoir lithologies and physical properties in the Neopleozoic sand reservoir of the Ordos basin.This log evaluation method covers the Cook method that is used to evaluate the porosity and oiliness in high porosity and low permeability reservoirs and another method in which the mineral content,derived from geochemical logs,is used to identify formation lithologies.Some areas have high calcium and low silt content,not uniformly distributed,the results of which show up in the complex formation lithologies and conventional log responses with great deviation.The reliability of the method is verified by comparison with conventional log data and core analyses.The calculation results coincide with the core analytical data and gas tests,which indicate that this log evaluation method is available,provides novel ideas for study of similar complex reservoir lithologies and has some reference value.展开更多
Eclogite, one of the important lithologies in the main hole of the Chinese Continental Scientific Drilling （CCSD） Project, exists above the depth of 3 245 m and has distinctive responses of gamma-ray, compensating d...Eclogite, one of the important lithologies in the main hole of the Chinese Continental Scientific Drilling （CCSD） Project, exists above the depth of 3 245 m and has distinctive responses of gamma-ray, compensating density and neutron well-logging, and so on. In this study, according to the diversities of minerals and chemical components and well-logging responses, edogites are classified from three aspects of origin, content of oxygen, and sub-mineral. We studied the logging identification method for eclogite sub-classes based on multi-element statistics and reconstructed 11 kinds of eclogite. As a result, eclogites can be divided into 6 types using well logs. In the light of this recognition, the eclogite in the main hole is divided into 20 sections, and the distribution characters of all sub-classes of eclogite are analyzed, which will provide important data for geological research of CCSD.展开更多
Based on the specialty of major rock-forning minerals and elementary composition of metamorphite,the detailed and systematical review,analysis and summary are completed for a series of lithology and reservoir fracture...Based on the specialty of major rock-forning minerals and elementary composition of metamorphite,the detailed and systematical review,analysis and summary are completed for a series of lithology and reservoir fracture identification teehnologies with logging that are recent years.Research shows that nuclear logging series in conventional logging are more favorable to identify the metanorphie lithology.ECS(elemental capturespectrosoopy)and other new logging lechnologies can be applied to identify metamorphic lithology.Due to theolex and di-verse metamorphic lithologies,the correspending reservoir identification standard should be established for metamorphic reservoir identificat lithology identification,The applicable conventional logging methods for metamorphic reservoir fracture identification mainly incldle dual lat ging,scoustic logging,dual lateral logging-microspherical focus,borehole diameter logging,natural gamma ray spectrology baging,etc.In additie acoustic-resistivity imaging logging,multipolar array acoustic logging,cross dipole acoustic logging and other new logging tec nologies with unique ad-vantages are increasingly applied for metamorphic reservoir fractureidentification.Currently,there are no gener appli sandards for logging i-dentification of metamorphic lithology and reservoir fracture.The specific metamorphic reservoir development a field actual data in specific ar-eas should be considered to study the logging identification and evaluation.展开更多
Particle swarm optimization （PSO） was modified by variation method of particle velocity, and a variation PSO （VPSO） algorithm was proposed to overcome the shortcomings of PSO, such as premature convergence and loc...Particle swarm optimization （PSO） was modified by variation method of particle velocity, and a variation PSO （VPSO） algorithm was proposed to overcome the shortcomings of PSO, such as premature convergence and local optimization. The VPSO algorithm is combined with Elman neural network （ENN） to form a VPSO-ENN hybrid algorithm. Compared with the hybrid algorithm of genetic algorithm （GA） and BP neural network （GA-BP）, VPSO-ENN has less adjustable parameters, faster convergence speed and higher identification precision in the numerical experiment. A system for identifying logging parameters was established based on VPSO-ENN. The results of an engineering case indicate that the intelligent identification system is effective in the lithology identification.展开更多
There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.Howe...There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.展开更多
The efficiency of tunnel excavation,rock strength,stability of surrounding rock,and underground engineering disasters are closely related to lithology.Accurately identifying lithology is a necessary prerequisite for i...The efficiency of tunnel excavation,rock strength,stability of surrounding rock,and underground engineering disasters are closely related to lithology.Accurately identifying lithology is a necessary prerequisite for intelligent,safe,and efficient tunnel construction.The design of conventional recognition models heavily relies on experience and extensive calculations.To develop a model suitable for deployment on construction sites and capable of accurate lithology identification,a fast search method for lithology identification models is proposed.This method integrates geological knowledge,apparent feature extraction techniques,and search algorithms.An efficient feature extraction super network using multi-scale geological features of rock surface is constructed,a model evaluation method that comprehensively considers accuracy and latency is developed,and differential evolution algorithm is used to search for the optimal model parameters.Experiments demonstrate that the proposed method enables the model to evolve faster and more accurately,and eventually a model(LithoNet)suitable for lithological classification is found.It only takes 2.10 ms to infer an image of 224×224,which is 57.25%faster than MobileNet v3 and 62.83%faster than ShuffleNet V2.The F1-score of LithoNet is 0.9874,surpassing classical models such as EfficientNetV2-S.LithoNet can be easily deployed on portable devices,effectively promoting the intelligence and accuracy of lithology identification at engineering sites.展开更多
This paper introduces how to use remote sensing images including Landsat (MSS and TM) and airborne radioactivity images to identify the type of rocks in the areas covered by vegetation. The relationship between light ...This paper introduces how to use remote sensing images including Landsat (MSS and TM) and airborne radioactivity images to identify the type of rocks in the areas covered by vegetation. The relationship between light spectrum (Landsat MSS and TM) and energy spectrum (U, Th and K) is discussed on the basis of correlation analysis, and it is proven that there are correlations between the Landsat MSS or TM data and the U, Th and K data. By using the fusion technique, new images were generated, which contain both the light spectrum and the energy spectrum information.展开更多
The rapid changing near source, multi-stream depositional environment of conglomerate reservoirs leads to severe heterogeneity, complex lithology and physical properties, and large changes of oil layer resistivity. Qu...The rapid changing near source, multi-stream depositional environment of conglomerate reservoirs leads to severe heterogeneity, complex lithology and physical properties, and large changes of oil layer resistivity. Quantitative evaluation of water-flooded layers has become an important but difficult focus for secondary development of oilfields. In this paper, based on the analysis of current problems in quantitative evaluation of water-flooded layers, the Kexia Group conglomerate reservoir of the Sixth District in the Karamay Oilfield was studied. Eight types of conglomerate reservoir lithology were identified effectively by a data mining method combined with the data from sealed coring wells, and then a multi-parameter model for quantitative evaluation of the water-flooded layers of the main oil-bearing lithology was developed. Water production rate, oil saturation and oil productivity index were selected as the characteristic parameters for quantitative evaluation of water-flooded layers of conglomerate reservoirs. Finally, quantitative evaluation criteria and identification rules for water-flooded layers of main oil-bearing lithology formed by integration of the three characteristic parameters of water-flooded layer and undisturbed formation resistivity. This method has been used in evaluation of the water-flooded layers of a conglomerate reservoir in the Karamay Oilfield and achieved good results, improving the interpretation accuracy and compliance rate. It will provide technical support for avoiding perforation of high water-bearing layers and for adjustment of developmental programs.展开更多
In this paper, we derive an approximation of the SS-wave reflection coefficient and the expression of S-wave ray elastic impedance （SREI） in terms of the ray parameter. The SREI can be expressed by the S-wave incide...In this paper, we derive an approximation of the SS-wave reflection coefficient and the expression of S-wave ray elastic impedance （SREI） in terms of the ray parameter. The SREI can be expressed by the S-wave incidence angle or P-wave reflection angle, referred to as SREIS and SREIP, respectively. Our study using elastic models derived from real log measurements shows that SREIP has better capability for lithology and fluid discrimination than SREIS and conventional S-wave elastic impedance （SEI）. We evaluate the SREIP feasibility using 25 groups of samples from Castagna and Smith （1994）. Each sample group is constructed by using shale, brine-sand, and gas-sand. Theoretical evaluation also indicates that SRE1P at large incident angles is more sensitive to fluid than conventional fluid indicators. Real seismic data application also shows that SRE1P at large angles calculated using P-wave and S-wave impedance can efficiently characterize tight gas-sand.展开更多
Laser-induced breakdown spectroscopy（LIBS） is a versatile tool for both qualitative and quantitative analysis.In this paper,LIBS combined with principal component analysis（PCA） and support vector machine（SVM） is...Laser-induced breakdown spectroscopy（LIBS） is a versatile tool for both qualitative and quantitative analysis.In this paper,LIBS combined with principal component analysis（PCA） and support vector machine（SVM） is applied to rock analysis.Fourteen emission lines including Fe,Mg,Ca,Al,Si,and Ti are selected as analysis lines.A good accuracy（91.38% for the real rock） is achieved by using SVM to analyze the spectroscopic peak area data which are processed by PCA.It can not only reduce the noise and dimensionality which contributes to improving the efficiency of the program,but also solve the problem of linear inseparability by combining PCA and SVM.By this method,the ability of LIBS to classify rock is validated.展开更多
For real-time classification of rock-masses in hard-rock tunnels,quick determination of the rock lithology on the tunnel face during construction is essential.Motivated by current breakthroughs in artificial intellige...For real-time classification of rock-masses in hard-rock tunnels,quick determination of the rock lithology on the tunnel face during construction is essential.Motivated by current breakthroughs in artificial intelligence technology in machine vision,a new automatic detection approach for classifying tunnel lithology based on tunnel face images was developed.The method benefits from residual learning for training a deep convolutional neural network(DCNN),and a multi-scale dilated convolutional attention block is proposed.The block with different dilation rates can provide various receptive fields,and thus it can extract multi-scale features.Moreover,the attention mechanism is utilized to select the salient features adaptively and further improve the performance of the model.In this study,an initial image data set made up of photographs of tunnel faces consisting of basalt,granite,siltstone,and tuff was first collected.After classifying and enhancing the training,validation,and testing data sets,a new image data set was generated.A comparison of the experimental findings demonstrated that the suggested approach outperforms previous classifiers in terms of various indicators,including accuracy,precision,recall,F1-score,and computing time.Finally,a visualization analysis was performed to explain the process of the network in the classification of tunnel lithology through feature extraction.Overall,this study demonstrates the potential of using artificial intelligence methods for in situ rock lithology classification utilizing geological images of the tunnel face.展开更多
基金Project supported by the Science and Technology Project of CNPC Chuanqing Drilling Engineering Co.,Ltd“Element logging features of key horizons and application in SichuaneChongqing gas provinces”(No.:CQ2014B-14-1-1).
文摘With the popularization and application of fast drilling technology in Sichuan-Chongqing gas provinces,the returned cuttings are fine and even powdered,so the traditional cutting lithology identification methods are not applicable any longer.In this paper,qualitative lithology identification and quantitative interpretation based on element logging were conducted on the key oil and gas bearing layers in this area according to the principle of elemental geochemistry.The study results show that:(1)different lithologies can be identified easily because of their different element logging characteristics.For example,basalts have the element characteristics of 0.35<Fe/Si<0.55 and Ca/(Na+K)<4.00,while sedimentary rocks have Fe/Si<0.35 or>0.55.(2)Clastic rocks,carbonate rocks,sulphate and transition rocks in the category of sedimentary rocks can be identified based on the element combination of(Al+Si+Fe)and(Ca+Mg+S).Among them,clastic rocks have(Al+Si+Fe)>31%,carbonate rocks have(Al+Si+Fe)<8%and(Ca+Mg+S)<36%,and sulphate rocks have(Al+Si+Fe)<5%and(Ca+Mg+S)>36%.(3)Then,based on the element combination of(Si+K+Ca)tSi/Al and(Al+Si+Fe+K)t(Ca+S)/Mg,sandstone,mudstone(shale),gypsum,dolomite,limestone and transition rocks can be identified.Finally,a qualitative identification chart and a set of quantitative interpretation software of element logging on key horizons in Sichuan-Chongqing gas provinces were developed to make this method convenient for field application.This method was applied on site in ten wells(such as Well MX207)in Sichuan-Chongqing gas provinces.It is indicated that the coincidence rate of lithology identification is in the range of 88.75-95.22%(averaging 92.42%).Obviously,it can satisfy the requirements of fast lithology identification while drilling of key oil and gas horizons in Sichuan-Chongqing gas provinces.
基金supported by CNPC-CZU Innovation Alliancesupported by the Program of Polar Drilling Environmental Protection and Waste Treatment Technology (2022YFC2806403)。
文摘In petroleum engineering,real-time lithology identification is very important for reservoir evaluation,drilling decisions and petroleum geological exploration.A lithology identification method while drilling based on machine learning and mud logging data is studied in this paper.This method can effectively utilize downhole parameters collected in real-time during drilling,to identify lithology in real-time and provide a reference for optimization of drilling parameters.Given the imbalance of lithology samples,the synthetic minority over-sampling technique(SMOTE)and Tomek link were used to balance the sample number of five lithologies.Meanwhile,this paper introduces Tent map,random opposition-based learning and dynamic perceived probability to the original crow search algorithm(CSA),and establishes an improved crow search algorithm(ICSA).In this paper,ICSA is used to optimize the hyperparameter combination of random forest(RF),extremely random trees(ET),extreme gradient boosting(XGB),and light gradient boosting machine(LGBM)models.In addition,this study combines the recognition advantages of the four models.The accuracy of lithology identification by the weighted average probability model reaches 0.877.The study of this paper realizes high-precision real-time lithology identification method,which can provide lithology reference for the drilling process.
基金support from the National Natural Science Foundation of China(Grant Nos:52379103 and 52279103)the Natural Science Foundation of Shandong Province(Grant No:ZR2023YQ049).
文摘Bayesian-optimized lithology identification has important basic geological research significance and engineering application value,and this paper proposes a Bayesian-optimized lithology identification method based on machine learning of rock visible and near-infrared spectral data.First,the rock spectral data are preprocessed using Savitzky-Golay(SG)smoothing to remove the noise of the spectral data;then,the preprocessed rock spectral data are downscaled using Principal Component Analysis(PCA)to reduce the redundancy of the data,optimize the effective discriminative information,and obtain the rock spectral features;finally,a Bayesian-optimized lithology identification model is established based on rock spectral features,optimize the model hyperparameters using Bayesian optimization(BO)algorithm to avoid the combination of hyperparameters falling into the local optimal solution,and output the predicted type of rock,so as to realize the Bayesian-optimized lithology identification.In addition,this paper conducts comparative analysis on models based on Artificial Neural Network(ANN)/Random Forest(RF),dimensionality reduction/full band,and optimization algorithms.It uses the confusion matrix,accuracy,Precison(P),Recall(R)and F_(1)values(F_(1))as the evaluation indexes of model accuracy.The results indicate that the lithology identification model optimized by the BO-ANN after dimensionality reduction achieves an accuracy of up to 99.80%,up to 99.79%and up to 99.79%.Compared with the BO-RF model,it has higher identification accuracy and better stability for each type of rock identification.The experiments and reliability analysis show that the Bayesian-optimized lithology identification method proposed in this paper has good robustness and generalization performance,which is of great significance for realizing fast,accurate and Bayesian-optimized lithology identification in tunnel site.
基金support from the National Natural Science Foundation of China(Nos.U24B2034,U2139204)the China Petroleum Science and Technology Innovation Fund(2021DQ02-0501)the Science and Technology Support Project of Langfang(2024011073).
文摘Lithology identification is a critical aspect of geoenergy exploration,including geothermal energy development,gas hydrate extraction,and gas storage.In recent years,artificial intelligence techniques based on drill core images have made significant strides in lithology identification,achieving high accuracy.However,the current demand for advanced lithology identification models remains unmet due to the lack of high-quality drill core image datasets.This study successfully constructs and publicly releases the first open-source Drill Core Image Dataset(DCID),addressing the need for large-scale,high-quality datasets in lithology characterization tasks within geological engineering and establishing a standard dataset for model evaluation.DCID consists of 35 lithology categories and a total of 98,000 high-resolution images(512×512 pixels),making it the most comprehensive drill core image dataset in terms of lithology categories,image quantity,and resolution.This study also provides lithology identification accuracy benchmarks for popular convolutional neural networks(CNNs)such as VGG,ResNet,DenseNet,MobileNet,as well as for the Vision Transformer(ViT)and MLP-Mixer,based on DCID.Additionally,the sensitivity of model performance to various parameters and image resolution is evaluated.In response to real-world challenges,we propose a real-world data augmentation(RWDA)method,leveraging slightly defective images from DCID to enhance model robustness.The study also explores the impact of real-world lighting conditions on the performance of lithology identification models.Finally,we demonstrate how to rapidly evaluate model performance across multiple dimensions using low-resolution datasets,advancing the application and development of new lithology identification models for geoenergy exploration.
基金financially supported by the National Natural Science Foundation of China(No.52174001)the National Natural Science Foundation of China(No.52004064)+1 种基金the Hainan Province Science and Technology Special Fund “Research on Real-time Intelligent Sensing Technology for Closed-loop Drilling of Oil and Gas Reservoirs in Deepwater Drilling”(ZDYF2023GXJS012)Heilongjiang Provincial Government and Daqing Oilfield's first batch of the scientific and technological key project “Research on the Construction Technology of Gulong Shale Oil Big Data Analysis System”(DQYT-2022-JS-750)。
文摘Real-time intelligent lithology identification while drilling is vital to realizing downhole closed-loop drilling. The complex and changeable geological environment in the drilling makes lithology identification face many challenges. This paper studies the problems of difficult feature information extraction,low precision of thin-layer identification and limited applicability of the model in intelligent lithologic identification. The author tries to improve the comprehensive performance of the lithology identification model from three aspects: data feature extraction, class balance, and model design. A new real-time intelligent lithology identification model of dynamic felling strategy weighted random forest algorithm(DFW-RF) is proposed. According to the feature selection results, gamma ray and 2 MHz phase resistivity are the logging while drilling(LWD) parameters that significantly influence lithology identification. The comprehensive performance of the DFW-RF lithology identification model has been verified in the application of 3 wells in different areas. By comparing the prediction results of five typical lithology identification algorithms, the DFW-RF model has a higher lithology identification accuracy rate and F1 score. This model improves the identification accuracy of thin-layer lithology and is effective and feasible in different geological environments. The DFW-RF model plays a truly efficient role in the realtime intelligent identification of lithologic information in closed-loop drilling and has greater applicability, which is worthy of being widely used in logging interpretation.
文摘The Paleogene Shahejie Formation in the KL16 oilfield, Bohai bay, is characterized by a thinly interbedded mixed sedimentary system, with complex sedimentary facies, lithologic types and distributions. It is hard for conventional logging methods to identify the lithology therein. In order to solve the difficulty in lithologic identification of mixed sedimentary system, analyses based on graph data base using elemental capture energy spectrum log have been proposed. Due to the different composition for the various minerals, we innovatively established the molar numbers of silicon, calcium, magnesium, and aluminum as characteristic parameters for sandstone, limestone, dolomite, and mudstone, and a graph clustering analysis method was applied to identify lithology. Considering the seismic waveforms corresponding to lithologic impedance of reservoir, three seismic phases were identified by neural network clustering analysis of seismic waveform, and the seismic attributes with high sensitivity to reservoir thickness were then selected to realize the fine description of the mixed carbonate-siliciclastic reservoir. Drilling results confirmed that the sedimentary facies were accurately identified, with reservoir prediction accuracy reaching up to 80%. Under the guidance of reservoir research, the oil-in-place discovered in the oilfield were estimated to be more than 5 million tonnes. This technology provides reference for the exploration and development of oilfields of mixed sedimentary system.
文摘Identification of stratigraphic interfaces and lithology is a key aspect in geological and geotechnical investigations.In this study,a monitoring while-drilling system was developed,along with a corresponding data pre-processing method.The method can handle invalid drilling data generated during manual operations.The correlation between various drilling parameters was analyzed,and a database of stratigraphic interfaces and key lithology identification based on the monitoring parameters was established.The average drilling speed was found to be the most suitable parameter for stratigraphic and lithology identification,and when the average drilling speed varied over a wide range,it corresponded to a stratigraphic interface.The average drilling speeds in sandy mudstone and sandstone strata were in the ranges of 0.1e0.2 m/min and 0.2e0.29 m/min,respectively.The results obtained using the present method were consistent with geotechnical survey results.The proposed method can be used for realtime lithology identification and represents a novel approach for intelligent geotechnical surveying.
基金Project(18GK28)supported by the Doctoral Scientific Research Staring Foundation for Yulin University,ChinaProject(20106101110020)supported by the University Research Fund of Science and Technology Development Center of Ministry of Education,ChinaProject(BJ08133-3)supported by the Key Fund Project of Continental Dynamics National Key Laboratory of Northwest University,China。
文摘This study for the first time demonstrates that some of the so-called clay-sized mudstones observed by the naked eye,such as clay-sized black mudstones and clay-sized oil shales,which are rich in black organic matter(including oil and asphaltene),in the Chang 73 Submember of the Upper Triassic Yanchang Formation in the Ordos Basin of China are actually clay-sized tuffaceous rocks(including tuff,sedimentary tuff and tuffaceous sedimentary rock)with high hydrocarbon generation capacities.Thus,these rocks can be defined as clay-sized tuffaceous source rocks.Identification of this lithology has important theoretical and practical significance for the exploration and development of shale oil in the Chang 7 Member.Through the macroscopic observation of drill cores and outcrop profiles,microscopic observation of electron probe thin sections and whole-rock inorganic geochemical analysis(including major,trace and rare earth elements),this work demonstrates that the organic matter-rich clay-sized tuffaceous rocks,especially clay-sized tuffs,have the following characteristics.First,the clay-sized tuffaceous rocks with little black organic matter are mainly greyish white,yellowish brown and purplish grey,and mixed colors occur in areas with strong bentonite lithification.Second,the clay-sized tuffaceous rocks have experienced strong devitrification and recrystallization,forming abundant flaky aluminosilicate minerals with directional arrangement.In thin sections under a polarizing microscope,the interference colors generally show regular alternation between the lowest interference color of first-order yellow and the highest interference color of second-order blue-green.Third,the rock samples plot in the igneous rock field in the TiO2-SiO2 cross-plot and exhibit similar trace element and rare earth element patterns on spider diagrams,indicating that the samples are derived from the same source.The results prove that clay-sized tuffaceous rocks may be widespread in the Chang 73 Submember of the Upper Triassic Yanchang Formation in the Ordos Basin,China.
基金support from the National Natural Science Foundation of China(Grant Nos.52022053 and 52009073)the Natural Science Foundation of Shandong Province(Grant No.ZR201910270116).
文摘An intelligent lithology identification method is proposed based on deep learning of the rock microscopic images.Based on the characteristics of rock images in the dataset,we used Xception,MobileNet_v2,Inception_ResNet_v2,Inception_v3,Densenet121,ResNet101_v2,and ResNet-101 to develop microscopic image classification models,and then the network structures of seven different convolutional neural networks(CNNs)were compared.It shows that the multi-layer representation of rock features can be represented through convolution structures,thus better feature robustness can be achieved.For the loss function,cross-entropy is used to back propagate the weight parameters layer by layer,and the accuracy of the network is improved by frequent iterative training.We expanded a self-built dataset by using transfer learning and data augmentation.Next,accuracy(acc)and frames per second(fps)were used as the evaluation indexes to assess the accuracy and speed of model identification.The results show that the Xception-based model has the optimum performance,with an accuracy of 97.66%in the training dataset and 98.65%in the testing dataset.Furthermore,the fps of the model is 50.76,and the model is feasible to deploy under different hardware conditions and meets the requirements of rapid lithology identification.This proposed method is proved to be robust and versatile in generalization performance,and it is suitable for both geologists and engineers to identify lithology quickly.
基金supported by the Program for New Century Excellent Talents in Universities
文摘In order to obtain effective parameters for complex sand reservoirs,a log evaluation method for relevant reservoir parameters is established based on an analysis in the gas-bearing sandstone with high porosity and low permeability,low porosity and permeability and on various characteristics of log responses to reservoir lithologies and physical properties in the Neopleozoic sand reservoir of the Ordos basin.This log evaluation method covers the Cook method that is used to evaluate the porosity and oiliness in high porosity and low permeability reservoirs and another method in which the mineral content,derived from geochemical logs,is used to identify formation lithologies.Some areas have high calcium and low silt content,not uniformly distributed,the results of which show up in the complex formation lithologies and conventional log responses with great deviation.The reliability of the method is verified by comparison with conventional log data and core analyses.The calculation results coincide with the core analytical data and gas tests,which indicate that this log evaluation method is available,provides novel ideas for study of similar complex reservoir lithologies and has some reference value.
基金This paper is supported by the Engineering Center of Chinese Continental Scientific Drilling (No. CCSD2004-04-01)the Focused Subject Program of Beijing (No. XK104910598).
文摘Eclogite, one of the important lithologies in the main hole of the Chinese Continental Scientific Drilling （CCSD） Project, exists above the depth of 3 245 m and has distinctive responses of gamma-ray, compensating density and neutron well-logging, and so on. In this study, according to the diversities of minerals and chemical components and well-logging responses, edogites are classified from three aspects of origin, content of oxygen, and sub-mineral. We studied the logging identification method for eclogite sub-classes based on multi-element statistics and reconstructed 11 kinds of eclogite. As a result, eclogites can be divided into 6 types using well logs. In the light of this recognition, the eclogite in the main hole is divided into 20 sections, and the distribution characters of all sub-classes of eclogite are analyzed, which will provide important data for geological research of CCSD.
文摘Based on the specialty of major rock-forning minerals and elementary composition of metamorphite,the detailed and systematical review,analysis and summary are completed for a series of lithology and reservoir fracture identification teehnologies with logging that are recent years.Research shows that nuclear logging series in conventional logging are more favorable to identify the metanorphie lithology.ECS(elemental capturespectrosoopy)and other new logging lechnologies can be applied to identify metamorphic lithology.Due to theolex and di-verse metamorphic lithologies,the correspending reservoir identification standard should be established for metamorphic reservoir identificat lithology identification,The applicable conventional logging methods for metamorphic reservoir fracture identification mainly incldle dual lat ging,scoustic logging,dual lateral logging-microspherical focus,borehole diameter logging,natural gamma ray spectrology baging,etc.In additie acoustic-resistivity imaging logging,multipolar array acoustic logging,cross dipole acoustic logging and other new logging tec nologies with unique ad-vantages are increasingly applied for metamorphic reservoir fractureidentification.Currently,there are no gener appli sandards for logging i-dentification of metamorphic lithology and reservoir fracture.The specific metamorphic reservoir development a field actual data in specific ar-eas should be considered to study the logging identification and evaluation.
基金The National Natural Science Foundation of China (No.E50774076)
文摘Particle swarm optimization （PSO） was modified by variation method of particle velocity, and a variation PSO （VPSO） algorithm was proposed to overcome the shortcomings of PSO, such as premature convergence and local optimization. The VPSO algorithm is combined with Elman neural network （ENN） to form a VPSO-ENN hybrid algorithm. Compared with the hybrid algorithm of genetic algorithm （GA） and BP neural network （GA-BP）, VPSO-ENN has less adjustable parameters, faster convergence speed and higher identification precision in the numerical experiment. A system for identifying logging parameters was established based on VPSO-ENN. The results of an engineering case indicate that the intelligent identification system is effective in the lithology identification.
基金The project was supported by the National Natural Science Foundation of China(Grant No.42204122).
文摘There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.
基金financial support from the National Natural Science Foundation of China(Grant Nos.52279103 and 52379103)the Natural Science Foundation of Shandong Province(Grant No.ZR2023YQ049).
文摘The efficiency of tunnel excavation,rock strength,stability of surrounding rock,and underground engineering disasters are closely related to lithology.Accurately identifying lithology is a necessary prerequisite for intelligent,safe,and efficient tunnel construction.The design of conventional recognition models heavily relies on experience and extensive calculations.To develop a model suitable for deployment on construction sites and capable of accurate lithology identification,a fast search method for lithology identification models is proposed.This method integrates geological knowledge,apparent feature extraction techniques,and search algorithms.An efficient feature extraction super network using multi-scale geological features of rock surface is constructed,a model evaluation method that comprehensively considers accuracy and latency is developed,and differential evolution algorithm is used to search for the optimal model parameters.Experiments demonstrate that the proposed method enables the model to evolve faster and more accurately,and eventually a model(LithoNet)suitable for lithological classification is found.It only takes 2.10 ms to infer an image of 224×224,which is 57.25%faster than MobileNet v3 and 62.83%faster than ShuffleNet V2.The F1-score of LithoNet is 0.9874,surpassing classical models such as EfficientNetV2-S.LithoNet can be easily deployed on portable devices,effectively promoting the intelligence and accuracy of lithology identification at engineering sites.
文摘This paper introduces how to use remote sensing images including Landsat (MSS and TM) and airborne radioactivity images to identify the type of rocks in the areas covered by vegetation. The relationship between light spectrum (Landsat MSS and TM) and energy spectrum (U, Th and K) is discussed on the basis of correlation analysis, and it is proven that there are correlations between the Landsat MSS or TM data and the U, Th and K data. By using the fusion technique, new images were generated, which contain both the light spectrum and the energy spectrum information.
文摘The rapid changing near source, multi-stream depositional environment of conglomerate reservoirs leads to severe heterogeneity, complex lithology and physical properties, and large changes of oil layer resistivity. Quantitative evaluation of water-flooded layers has become an important but difficult focus for secondary development of oilfields. In this paper, based on the analysis of current problems in quantitative evaluation of water-flooded layers, the Kexia Group conglomerate reservoir of the Sixth District in the Karamay Oilfield was studied. Eight types of conglomerate reservoir lithology were identified effectively by a data mining method combined with the data from sealed coring wells, and then a multi-parameter model for quantitative evaluation of the water-flooded layers of the main oil-bearing lithology was developed. Water production rate, oil saturation and oil productivity index were selected as the characteristic parameters for quantitative evaluation of water-flooded layers of conglomerate reservoirs. Finally, quantitative evaluation criteria and identification rules for water-flooded layers of main oil-bearing lithology formed by integration of the three characteristic parameters of water-flooded layer and undisturbed formation resistivity. This method has been used in evaluation of the water-flooded layers of a conglomerate reservoir in the Karamay Oilfield and achieved good results, improving the interpretation accuracy and compliance rate. It will provide technical support for avoiding perforation of high water-bearing layers and for adjustment of developmental programs.
基金sponsored by National Natural Science Fund Projects (No.41204072 and No.U1262208)Research Funds Provided to New Recruitments of China University of Petroleum-Beijing (YJRC-2011-03)Science Foundation of China University of Petroleum-Beijing (YJRC-2013-36)
文摘In this paper, we derive an approximation of the SS-wave reflection coefficient and the expression of S-wave ray elastic impedance （SREI） in terms of the ray parameter. The SREI can be expressed by the S-wave incidence angle or P-wave reflection angle, referred to as SREIS and SREIP, respectively. Our study using elastic models derived from real log measurements shows that SREIP has better capability for lithology and fluid discrimination than SREIS and conventional S-wave elastic impedance （SEI）. We evaluate the SREIP feasibility using 25 groups of samples from Castagna and Smith （1994）. Each sample group is constructed by using shale, brine-sand, and gas-sand. Theoretical evaluation also indicates that SRE1P at large incident angles is more sensitive to fluid than conventional fluid indicators. Real seismic data application also shows that SRE1P at large angles calculated using P-wave and S-wave impedance can efficiently characterize tight gas-sand.
基金Project supported by the National Natural Science Foundation of China(Grant No.11075184)the Knowledge Innovation Program of the Chinese Academy of Sciences(CAS)(Grant No.Y03RC21124)the CAS President’s International Fellowship Initiative Foundation(Grant No.2015VMA007)
文摘Laser-induced breakdown spectroscopy（LIBS） is a versatile tool for both qualitative and quantitative analysis.In this paper,LIBS combined with principal component analysis（PCA） and support vector machine（SVM） is applied to rock analysis.Fourteen emission lines including Fe,Mg,Ca,Al,Si,and Ti are selected as analysis lines.A good accuracy（91.38% for the real rock） is achieved by using SVM to analyze the spectroscopic peak area data which are processed by PCA.It can not only reduce the noise and dimensionality which contributes to improving the efficiency of the program,but also solve the problem of linear inseparability by combining PCA and SVM.By this method,the ability of LIBS to classify rock is validated.
基金funded by the National Natural Science Foundation of China(Grant No.51978460)the Open Fund of State Key Laboratory of Shield Machine and Boring Technology(No.SKLST-2019-K08).
文摘For real-time classification of rock-masses in hard-rock tunnels,quick determination of the rock lithology on the tunnel face during construction is essential.Motivated by current breakthroughs in artificial intelligence technology in machine vision,a new automatic detection approach for classifying tunnel lithology based on tunnel face images was developed.The method benefits from residual learning for training a deep convolutional neural network(DCNN),and a multi-scale dilated convolutional attention block is proposed.The block with different dilation rates can provide various receptive fields,and thus it can extract multi-scale features.Moreover,the attention mechanism is utilized to select the salient features adaptively and further improve the performance of the model.In this study,an initial image data set made up of photographs of tunnel faces consisting of basalt,granite,siltstone,and tuff was first collected.After classifying and enhancing the training,validation,and testing data sets,a new image data set was generated.A comparison of the experimental findings demonstrated that the suggested approach outperforms previous classifiers in terms of various indicators,including accuracy,precision,recall,F1-score,and computing time.Finally,a visualization analysis was performed to explain the process of the network in the classification of tunnel lithology through feature extraction.Overall,this study demonstrates the potential of using artificial intelligence methods for in situ rock lithology classification utilizing geological images of the tunnel face.
