A highly sensitive SPE-liquid/liquid extraction RPLC method has been developed for the analysis of 6β-hydroxycortisol and cortisol in the urine of cancer patients. Methods： After SPE column purification and liquid-l...A highly sensitive SPE-liquid/liquid extraction RPLC method has been developed for the analysis of 6β-hydroxycortisol and cortisol in the urine of cancer patients. Methods： After SPE column purification and liquid-liquid extraction, the sample test solutions were analyzed with RPLC using a C18 analytical column. This improved analytical method has been validated for linearity, accuracy （recovery from urine）, repeatability （within-day and between-day precision）, specificity, sensitivity, and stability. This SPE-liquid/liquid extraction-RPLC is rapid, simple, accurate and reproducible. The technique is particularly useful for monitoring the CYP3A activity of cancer patients in clinical settings. The results are expressed as the ratio of 6β-hydroxycortisol to cortisol. Results： The CYP3A activity from a total of 153 samples was measured using this improved method. Considerable variation in the CYP3A activity of different cancer patients has been documented. Thus, personalized medical treatment based on the individual metabolic enzyme activity level is necessary. Conclusion： This new analytical method facilitates such individualized medical treatments.展开更多
A novel process for separation of red （Y2O3：Eu^3＋）, blue（BaMgAl10O17：Eu^2＋） and green （CeMgAl10O17：Tb^3） rare earth fluorescent powders was proposed. At first, the blue powder can be extracted selectively f...A novel process for separation of red （Y2O3：Eu^3＋）, blue（BaMgAl10O17：Eu^2＋） and green （CeMgAl10O17：Tb^3） rare earth fluorescent powders was proposed. At first, the blue powder can be extracted selectively from an aqueous solution using a chelating collector 2-thenoyltrifluoroacetone （TTA） dissolved in heptane at alkaline pH condition, then, chloroform was used for extracting the green powder into organic phase. The red phosphor remains in aqueous phase with potassium sodium tartrate depressant （PST）. Therefore, three phosphors can be separated successfully from their artificial mixtures by liquid/liquid extraction, and grades and recovery of separated products reach respectively as follows： red is 96.9% and 95.2%, blue is 82.7% and 98.8%, green is 94.6% and 82.6%.展开更多
A novel process for separation of red （Y2O3： Eu^3＋）, blue （Sr, Ca, Ba）10（PO4）6Cl2： Eu^2＋ and green （LaPO4： Tb^3＋, Ce^3＋） fine tricolor phosphor powders was established. First, the green phosphor was ext...A novel process for separation of red （Y2O3： Eu^3＋）, blue （Sr, Ca, Ba）10（PO4）6Cl2： Eu^2＋ and green （LaPO4： Tb^3＋, Ce^3＋） fine tricolor phosphor powders was established. First, the green phosphor was extracted and separated from three phosphor mixtures in heptane/DMF（N, N-Dimethylformamide） system using stearylamine or laurylamine （DDA） as the cationic surfactant. Then, after being treated with 99.5% ethanol, the blue and red phosphors could be separated in Heptane/DMF system in presence of 1-octanesulfonic acid sodium salt as the anionic surfactant. Satisfactory separation results have been achieved through two steps extractions with their artificial mixtures. The grades and recovery of separated products reached respectively as follows： red product was 95.3% and 90.9%, blue product was 90.0% and 95.2%, and green product was 92.2% and 91.8%.展开更多
The study introduces eco-friendly leaching agents as alternatives to traditional rare earth element(REE)extraction solvents,addressing environmental concerns associated with ammonium sulfate.Bio-based ionic liquids(IL...The study introduces eco-friendly leaching agents as alternatives to traditional rare earth element(REE)extraction solvents,addressing environmental concerns associated with ammonium sulfate.Bio-based ionic liquids(ILs),known for their non-toxic and biodegradable properties,were screened using the COSMO-RS software.Initially,105 ILs involving 7 cations and 15 anions were computationally screened to find the best ILs for REE extraction.The chosen criteria were based on hydrogen bond formation,affinity screening,hydrophobicity,viscosity,and eco-toxicity test.Based on the COSMO-RS screening,choline oleate,choline decanoate,and choline hexanoate exhibit high solubility for REEs,with a chemical potential of 17.60,17.01,and 18.37 kcal/mol at REE oxidation state+2.Choline glycinate,choline oleate,choline decanoate,choline hexanoate,choline lysinate,and choline leucinate were selected for their strong affinity to extract REE dissociate ions.Experimental results show slightly higher REE extraction from ammonium sulfate(3.17 ppm)compared to choline glycinate(3.15 ppm).For long-term applications,choline glycinate offers a promising eco-friendly and cost-effective alternative to traditional leaching agents,promoting economic feasibility and environmental friendliness.展开更多
Rare earth elements(REEs) were extracted from phosphogypsum(PG) using an indirect leaching method that produces CaCO_(3).The carbonation process transforms PG into CaCO_(3),and a potential source of value is the(NH_(4...Rare earth elements(REEs) were extracted from phosphogypsum(PG) using an indirect leaching method that produces CaCO_(3).The carbonation process transforms PG into CaCO_(3),and a potential source of value is the(NH_(4))_(2)SO_(4) fertilizer.The calcium carbonate byproduct is rich in REEs that are originally present in PG.Calcium carbonate,a byproduct of PG carbonation and a rich source of REEs,could dissolve in nitric acid to produce a calcium nitrate leach solution that contains RE nitrate.Subsequently,the most widely used solvent extraction technique can make use of an environmentally benign nitrate ionic liquid.Cyphos IL 101(trihexyl(tetradecyl)phosphonium chloride) is transformed into trihexyl(tetradecyl)phosphonium nitrate([P_(66614)][NO_(3)]) ionic liquid by adding 2.5 mol/L potassium nitrate.The extraction examinations were tested by equilibration of 2 mL of [P_(66614)][NO_(3)] with 2 mL of a synthetic solution of 1000 mg/L of individual La,Ce,and Nd to gain the optimal extraction conditions.The high extraction efficiency of La,Ce,and Nd was gained by stirring a 1/1 aqueous/organic phase ratio and 3 mol/L NH_(4)NO_(3)(as salting out) at 800 r/min for 40 min at 50℃ to decrease the viscosity of [P_(66614)][NO_(3)].The La(Ⅲ),Ce(Ⅲ),and Nd(Ⅲ) stripping efficiencies were examined from their loaded [P_(66614)][NO_(3)] ionic liquid by 1/1 A/O ratio of acidified water,800 r/min stirring speed,and 25℃.After nine cycles,the extraction and stirring efficiency for the La,Ce,and Nd drop to about 80%.The extraction and stripping parameters are applied to the RE leachate from PG to gain the RE oxide with an assay of 92.67%.展开更多
Liquid rocket engine(LRE)fault diagnosis is critical for successful space launch missions,enabling timely avoidance of safety hazards,while accurate post-failure analysis prevents subsequent economic losses.However,th...Liquid rocket engine(LRE)fault diagnosis is critical for successful space launch missions,enabling timely avoidance of safety hazards,while accurate post-failure analysis prevents subsequent economic losses.However,the complexity of LRE systems and the“black-box”nature of current deep learning-based diagnostic methods hinder interpretable fault diagnosis.This paper establishes Granger causality(GC)extraction-based component-wise multi-layer perceptron(GCMLP),achieving high fault diagnosis accuracy while leveraging GC to enhance diagnostic interpretability.First,component-wise MLP networks are constructed for distinct LRE variables to extract inter-variable GC relationships.Second,dedicated predictors are designed for each variable,leveraging historical data and GC relationships to forecast future states,thereby ensuring GC reliability.Finally,the extracted GC features are utilized for fault classification,guaranteeing feature discriminability and diagnosis accuracy.This study simulates six critical fault modes in LRE using Simulink.Based on the generated simulation data,GCMLP demonstrates superior fault localization accuracy compared to benchmark methods,validating its efficacy and robustness.展开更多
A series of innovative green metallurgical processes using novel reaction media including the NaOH/KOH sub-molten salt media and the NaOH-NaNO3 binary molten salt medium, for the extraction of vanadium and chromium fr...A series of innovative green metallurgical processes using novel reaction media including the NaOH/KOH sub-molten salt media and the NaOH-NaNO3 binary molten salt medium, for the extraction of vanadium and chromium from the vanadium slag have been developed. In comparison with the traditional sodium salt roasting technology, which operates at 850 ℃, the operation temperatures of these new processes drop to 200-400 ℃. Further, the extraction rates of vanadium and chromium utilizing the new approaches could reach 95% and 90%, respectively, significantly higher than those in the traditional roasting process, which are 75% and approximate zero, respectively. Besides, no hazardous gases and toxic tailings are discharged during the extraction process. Compared with the conventional roasting method, these new technologies show obvious advantages in terms of energy, environments, and the mineral resource utilization efficiency, providing an attractive alternative for the green technology upgrade of the vanadium production industries.展开更多
In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with l...In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.展开更多
This study investigates the reduction in polarization measurement accuracy caused by varying in-cident angles in a liquid crystal variable retarder(LCVR).The phase delay characteristics of the LCVR were examined,with ...This study investigates the reduction in polarization measurement accuracy caused by varying in-cident angles in a liquid crystal variable retarder(LCVR).The phase delay characteristics of the LCVR were examined,with particular emphasis on the influence of different two-dimensional incident angles on phase delay behavior.Building upon the calibration of phase delay under normal incidence,a phase delay calibra-tion model was developed to account for variations in incident angle and driving voltage.A mathematical re-lationship was established between phase delay and the azimuth angle(α)and pitch angle(β).Experimental validation was conducted under three conditions:α=20°,β=0°;α=0°,β=20°;and an arbitrary angle whereα=5°,β=15°.The results demonstrated that the maximum average deviation between theoretical pre-dictions and experimental measurements did not exceed 0.059 rad.The proposed calibration method proved to be both accurate and practical.This approach offers robust support for LCVR parameter calibration and performance optimization in optical systems,particularly in polarization imaging applications.展开更多
Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were i...Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.展开更多
Soft machines harness material-level physical intelligence to perform adaptive tasks,enabling advancements in biomedical and human-machine interaction fields.Soft switches are the basic building blocks to achieve inte...Soft machines harness material-level physical intelligence to perform adaptive tasks,enabling advancements in biomedical and human-machine interaction fields.Soft switches are the basic building blocks to achieve intelligent functions like autonomous decisions and mechanical computation.However,current soft switches suffer from complex fabrication processes,limited performance,and a lack of multimodal control,which hinder their practical application and the realization of machine intelligence.Herein,by harnessing the unique self-pinch and self-healing effects of the gallium-based liquid metals(LMs),we describe a soft high-performance electric switch composed of an LM line encapsulated within an elastomer.Applying pressure to deform the LM switch can increase local current density,leading to the electromagnetic self-pinch effect for switching off.After releasing pressure,the LM can spontaneously heal with the elastic recovery of the elastomer for switching on.This LM switch shows comprehensive advantages,including a compact design(0.5 mm×1.5 mm×10 mm),good stretchability(100%),high on/off ratio(~10^(9)),rapid response time(<100 ms),and excellent durability(>12000 cycles).Moreover,the LM switches enable multiple control modes,including magnetic and optical stimulation,through the integration of responsive materials.We demonstrate various LM switch-enabled functional soft machines,such as an interactive flexible gripper,a self-oscillating soft crawler,and wearable logic gates.This work will open new avenues for the application of LM in intelligent soft machines and advanced wearable electronics.展开更多
This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization usin...This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization using high-speed camera imaging.The T-junction microchannel has a cross-sectional width of 0.6 mm and a total length of 27.3 mm.The solution of cyclohexane with 2%and 3%mass concentrations of sorbitan trioleate surfactant were used as the continuous phase,and water was used as the dispersed phase.Slug flow,characteristic of squeezing regime,were predominantly observed.The effects of liquid–liquid two-phase flow rate ratio,and dimensionless number on droplet size,and pressure drop were investigated.The squeezing regime was mapped for 0.0005≤Ca_(c)≤0.0052(capillary number)and 0.1≤q≤10(flow rate ratio).The pressure drops of slugs were in the range from 40 Pa to 200 Pa.The slug lengths were measured between 1 mm and 9 mm.A universal flow map dependent on Ca_(c)Re_(d)^(0.5) are projected to investigate the droplet formation behavior in T-junction microchannel.Correlation expressions are proposed to predict pressure drops and the slug lengths for liquid–liquid two-phase flow in a square T-junction microchannel,using dimensionless numbers such as flow rate ratio and capillary number.The result shows that large continuous phase flow rates facilitate smaller slugs,whereas higher dispersed phase flow rates result in longer shorts.展开更多
As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized fo...As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.展开更多
The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0....The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0.36,we studied the kagome-lattice t-J model using state-of-the-art density matrix renormalization group calculations.On the L_(y)=3 cylinder(Ly is the number of unit cells along the circumferential direction),we established a quantum phase diagram with an increasing doping level.In addition to the charge density wave states at lower doping levels,we found an emergent Fermi-liquid-like phase by melting the holon Wigner crystal at δ≈0.15,which is characterized by the suppression of charge density oscillation and power-law decay of various correlation functions.For a wider L_(y)=4 cylinder,the bond-dimension extrapolated correlation functions also support such a Fermi-liquid-like state,suggesting its stability with increasing system size.In a narrow doping range near δ=1/3 for the L_(y)=3 cylinder,we find a state with an exponential decay of the single-particle correlation,but the other correlation functions preserve the features in the Fermi-liquid-like phase,which may be a precursor of a superconducting state.Nevertheless,this peculiar state nearδ=1/3 disappears for the L_(y)=4 cylinder,implying a possible lattice-size dependence.Our results reveal quantum melting from a holon Wigner crystal to a Fermi-liquid-like state with increasing hole density and suggest a doping regime to explore superconductivity in future studies.展开更多
The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))an...The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))and Zn(BF_(4))_(2),the supramolecular gelatorβ-cyclodextrin(β-CD)was added,and then a gel electrolyte(CD-ILZE)for zinc-ion batteries was prepared through host-vip interaction betweenβ-CD and DMSO-ILZE electrolyte.The gel electrolyte has good conductivity between-30 and 80℃,which is found by fitting the Arrhenius equation that the gel electrolyte satisfies the liquid law within this temperature range.In addition,the supramolecular gel electrolyte can effectively decrease hydrogen evolution corrosion and the formation of zinc dendrites.Compared with the battery prepared by DMSO-ILZE electrolyte(about 1100 h),the prepared Zn||Zn battery exhibits a more stable cycle(over 2800 h)at a current density of 0.5 m A·cm^(-2).At 0.1 A·g^(-1),the prepared Zn||V_(2)O_(5)gel electrolyte cell has a capacity of 30 m Ah·g^(-1)and a capacity retention rate of 85.17%after more than 1500 cycles.The CD-ILZE supramolecular gel electrolyte can inhibit the formation of hydrogen evolution corrosion and zinc dendrites,and improve the cycling performance of the battery.展开更多
Despite the intrinsic durability of polymeric hole transport materials,poly-triarylamines(PTAA)-based inverted perovskite solar cells(PSCs)have lagged behind their counterparts in efficiency,primarily due to poor surf...Despite the intrinsic durability of polymeric hole transport materials,poly-triarylamines(PTAA)-based inverted perovskite solar cells(PSCs)have lagged behind their counterparts in efficiency,primarily due to poor surface wettability,insufficient interfacial contact,and unfavorable energy level alignment at the PTAA/perovskite interface.Here,we report a highly effective interfacial engineering strategy employing the ionic liquid 1,3-dimethylimidazolium dimethyl phosphate(DMIMPH)as a multifunctional interfacial modifier.The incorporation of DMIMPH improves PTAA wettability,promoting the growth of high-quality perovskite films with enhanced interfacial contact.Concurrently,DMIMPH effectively tunes the energy levels of PTAA,enhances its electrical conductivity,and passivates interfacial defects with more efficient hole extraction and charge transport.Moreover,its interaction with residual PbI_(2) modulates perovskite crystallization kinetics,yielding highly crystalline perovskite films with enlarged grain sizes,reduced PbI_(2) residue,and suppressed trap densities.As a result,PTAA-based p-i-n PSCs employing this approach achieve a record certified power conversion efficiency(PCE)of 24.52%,with a champion efficiency of 25.12%—the highest certified value for PTAA-based perovskite devices to date.Impressively,the DMIMPH-modified PSCs without encapsulation maintained 87.48%of their initial efficiency after 1600 h in air.This strategy offers an effective pathway for advancing the performance and stability of polymer-based inverted PSCs.展开更多
The efficient flotation separation of rare earth elements(REEs)from gangue minerals is crucial in mineral processing.This study synthesized a quaternary ammonium salt ionic liquid collector,tetrabutylammonium salicylh...The efficient flotation separation of rare earth elements(REEs)from gangue minerals is crucial in mineral processing.This study synthesized a quaternary ammonium salt ionic liquid collector,tetrabutylammonium salicylhydroxamate(T-S),and investigated its performance in separating bastnaesite and fluorite.T-S was synthesized from salicylhydroxamic acid(SHA)and tetrabutylammonium chloride(TBAC),and its molecular structure was characterized using Fourier transform infrared(FTIR)spectroscopy.Microflotation tests indicate that T-S outperforms SHA and TBAC in both collecting ability and selectivity for bastnaesite.Adsorption,zeta potential,and infrared spectroscopy measurements reveal that T-S exhibits stronger adsorption on bastnaesite compared to SHA and TBAC.X-ray photoelectron spectroscopy(XPS)and molecular dynamics simulations(MDS)results confirm that chemical adsorption occurs between Ce on the bastnaesite surface and the-C(=O)NHOH groups of T-S.Moreover,the interaction between T-S and the bastnaesite surface is stronger than that with the fluorite surface.This work provides valuable insights for designing ionic liquid collectors for the flotation separation of bastnaesite and fluorite.展开更多
Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the deve...Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the development of melt crystallization is hampered by lacking solid–liquid equilibrium (SLE) data for some isomers.Therefore,the SLE data of both binary and ternary mixtures of 2,3-dimethylphenol (2,3-DMP),3,5-dimethylphenol (3,5-DMP),and 3,4-dimethylphenol (3,4-DMP) were determined by using differential scanning calorimetry in this work.Additionally,crystallographic analysis was conducted to investigate the thermodynamic characteristics of these mixtures.The experimental results indicated that all the systems investigated in this research exhibited eutectic behavior.The experimentally obtained SLE data were well correlated with the Wilson and non-random two-liquid models.The excess thermodynamic functions were calculated to analyze the types and intensities of the molecular interactions occurring in the mixtures.Furthermore,this study developed a model for the correlation between the theoretical crystallization yield and the actual cooling yield and final yield in melt crystallization.This study has furnished reliable data essential for developing and optimizing the melt crystallization process of mixtures of 2,3-DMP,3,5-DMP,and 3,4-DMP.展开更多
Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection ...Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection challenging,they are linked to problems.Diagnostic methods like imaging and tissue biopsy are only effective when the tumor has reached a size that can be identified.The liquid biopsy technique,the least intrusive and most convenient diagnostic method,is the subject of this review.It focuses on the significance of single cell analysis in examining uncommon cancer types.The many biomarkers found in bodily fluids and the cancer types they are linked to in children have been assessed,as has the potential route towards early detection and cancer recurrence forecasting.Combining the single cell liquid biopsy with the newest technologies,such as computational and multi-omics approaches,which have improved the efficiency of processing massive and unique genetic data,appears promising.This article discusses on a number of case reports for uncommon pediatric malignancies,such as Neuroblastoma,Medulloblastoma,Wilms Tumor,Rhabdomyosarcoma,Ewing Sarcoma,and Retinoblastoma,as well as their liquid biopsy profiles.Furthermore,the findings raise ethical questions regarding the therapeutic application of the technology as well as possible difficulties related to clinical translation.The likelihood that this single cell liquid biopsy will be clinically validated and eventually used as a routine diagnostic tool for uncommon pediatric cancers will rise with the realistic approach to sensitivity monitoring,specificity upgrading,and optimization.展开更多
The integration of multi-omic liquid biopsies with artificial intelligence(AI)represents a rapidly evolving frontier in early cancer detection,offering the potential to enhance personalized medicine and improve patien...The integration of multi-omic liquid biopsies with artificial intelligence(AI)represents a rapidly evolving frontier in early cancer detection,offering the potential to enhance personalized medicine and improve patient outcomes.This review explores the current state and emerging directions of this approach,focusing on the synergistic value of combining genomics,epigenomics,transcriptomics,proteomics,and metabolomics with AIdriven analytics.We discuss advances in multi-analyte blood tests such as CancerSEEK,which have demonstrated promising multi-cancer detection capabilities in early studies,as well as efforts to integrate liquid biopsy data with imaging modalities to improve diagnostic performance.The review also highlights ongoing challenges,including the need for greater analytical sensitivity,improved specificity for early-stage disease,standardization of workflows,and harmonization with existing screening modalities.We outline the prospective—but still largely investigational—impact of these technologies on cancer management,including early detection,treatment monitoring,and minimal residual disease assessment,along with their potential economic implications.Ultimately,we envision a future in which multi-omic liquid biopsies integrated with AI may contribute to more effective,noninvasive cancer detection strategies,while recognizing that substantial validation,regulatory approval,and health-system integration are required before widespread clinical adoption can occur.展开更多
基金supported by the Shanghai Pharmaceutical Association
文摘A highly sensitive SPE-liquid/liquid extraction RPLC method has been developed for the analysis of 6β-hydroxycortisol and cortisol in the urine of cancer patients. Methods： After SPE column purification and liquid-liquid extraction, the sample test solutions were analyzed with RPLC using a C18 analytical column. This improved analytical method has been validated for linearity, accuracy （recovery from urine）, repeatability （within-day and between-day precision）, specificity, sensitivity, and stability. This SPE-liquid/liquid extraction-RPLC is rapid, simple, accurate and reproducible. The technique is particularly useful for monitoring the CYP3A activity of cancer patients in clinical settings. The results are expressed as the ratio of 6β-hydroxycortisol to cortisol. Results： The CYP3A activity from a total of 153 samples was measured using this improved method. Considerable variation in the CYP3A activity of different cancer patients has been documented. Thus, personalized medical treatment based on the individual metabolic enzyme activity level is necessary. Conclusion： This new analytical method facilitates such individualized medical treatments.
基金Funded by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry (ROCS, SEM [2005] No. 383)
文摘A novel process for separation of red （Y2O3：Eu^3＋）, blue（BaMgAl10O17：Eu^2＋） and green （CeMgAl10O17：Tb^3） rare earth fluorescent powders was proposed. At first, the blue powder can be extracted selectively from an aqueous solution using a chelating collector 2-thenoyltrifluoroacetone （TTA） dissolved in heptane at alkaline pH condition, then, chloroform was used for extracting the green powder into organic phase. The red phosphor remains in aqueous phase with potassium sodium tartrate depressant （PST）. Therefore, three phosphors can be separated successfully from their artificial mixtures by liquid/liquid extraction, and grades and recovery of separated products reach respectively as follows： red is 96.9% and 95.2%, blue is 82.7% and 98.8%, green is 94.6% and 82.6%.
基金Funded by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry (ROCS, SEM [2005] No. 383)
文摘A novel process for separation of red （Y2O3： Eu^3＋）, blue （Sr, Ca, Ba）10（PO4）6Cl2： Eu^2＋ and green （LaPO4： Tb^3＋, Ce^3＋） fine tricolor phosphor powders was established. First, the green phosphor was extracted and separated from three phosphor mixtures in heptane/DMF（N, N-Dimethylformamide） system using stearylamine or laurylamine （DDA） as the cationic surfactant. Then, after being treated with 99.5% ethanol, the blue and red phosphors could be separated in Heptane/DMF system in presence of 1-octanesulfonic acid sodium salt as the anionic surfactant. Satisfactory separation results have been achieved through two steps extractions with their artificial mixtures. The grades and recovery of separated products reached respectively as follows： red product was 95.3% and 90.9%, blue product was 90.0% and 95.2%, and green product was 92.2% and 91.8%.
基金supported by Petronas Research Sdn Bhd(PRSB)with grant number(015M20-129)Centre of Research in Ionic Liquids(CORIL)Universiti Teknologi PETRONAS for the facilities and support provided。
文摘The study introduces eco-friendly leaching agents as alternatives to traditional rare earth element(REE)extraction solvents,addressing environmental concerns associated with ammonium sulfate.Bio-based ionic liquids(ILs),known for their non-toxic and biodegradable properties,were screened using the COSMO-RS software.Initially,105 ILs involving 7 cations and 15 anions were computationally screened to find the best ILs for REE extraction.The chosen criteria were based on hydrogen bond formation,affinity screening,hydrophobicity,viscosity,and eco-toxicity test.Based on the COSMO-RS screening,choline oleate,choline decanoate,and choline hexanoate exhibit high solubility for REEs,with a chemical potential of 17.60,17.01,and 18.37 kcal/mol at REE oxidation state+2.Choline glycinate,choline oleate,choline decanoate,choline hexanoate,choline lysinate,and choline leucinate were selected for their strong affinity to extract REE dissociate ions.Experimental results show slightly higher REE extraction from ammonium sulfate(3.17 ppm)compared to choline glycinate(3.15 ppm).For long-term applications,choline glycinate offers a promising eco-friendly and cost-effective alternative to traditional leaching agents,promoting economic feasibility and environmental friendliness.
文摘Rare earth elements(REEs) were extracted from phosphogypsum(PG) using an indirect leaching method that produces CaCO_(3).The carbonation process transforms PG into CaCO_(3),and a potential source of value is the(NH_(4))_(2)SO_(4) fertilizer.The calcium carbonate byproduct is rich in REEs that are originally present in PG.Calcium carbonate,a byproduct of PG carbonation and a rich source of REEs,could dissolve in nitric acid to produce a calcium nitrate leach solution that contains RE nitrate.Subsequently,the most widely used solvent extraction technique can make use of an environmentally benign nitrate ionic liquid.Cyphos IL 101(trihexyl(tetradecyl)phosphonium chloride) is transformed into trihexyl(tetradecyl)phosphonium nitrate([P_(66614)][NO_(3)]) ionic liquid by adding 2.5 mol/L potassium nitrate.The extraction examinations were tested by equilibration of 2 mL of [P_(66614)][NO_(3)] with 2 mL of a synthetic solution of 1000 mg/L of individual La,Ce,and Nd to gain the optimal extraction conditions.The high extraction efficiency of La,Ce,and Nd was gained by stirring a 1/1 aqueous/organic phase ratio and 3 mol/L NH_(4)NO_(3)(as salting out) at 800 r/min for 40 min at 50℃ to decrease the viscosity of [P_(66614)][NO_(3)].The La(Ⅲ),Ce(Ⅲ),and Nd(Ⅲ) stripping efficiencies were examined from their loaded [P_(66614)][NO_(3)] ionic liquid by 1/1 A/O ratio of acidified water,800 r/min stirring speed,and 25℃.After nine cycles,the extraction and stirring efficiency for the La,Ce,and Nd drop to about 80%.The extraction and stripping parameters are applied to the RE leachate from PG to gain the RE oxide with an assay of 92.67%.
文摘Liquid rocket engine(LRE)fault diagnosis is critical for successful space launch missions,enabling timely avoidance of safety hazards,while accurate post-failure analysis prevents subsequent economic losses.However,the complexity of LRE systems and the“black-box”nature of current deep learning-based diagnostic methods hinder interpretable fault diagnosis.This paper establishes Granger causality(GC)extraction-based component-wise multi-layer perceptron(GCMLP),achieving high fault diagnosis accuracy while leveraging GC to enhance diagnostic interpretability.First,component-wise MLP networks are constructed for distinct LRE variables to extract inter-variable GC relationships.Second,dedicated predictors are designed for each variable,leveraging historical data and GC relationships to forecast future states,thereby ensuring GC reliability.Finally,the extracted GC features are utilized for fault classification,guaranteeing feature discriminability and diagnosis accuracy.This study simulates six critical fault modes in LRE using Simulink.Based on the generated simulation data,GCMLP demonstrates superior fault localization accuracy compared to benchmark methods,validating its efficacy and robustness.
基金Project(2013CB632605)supported by the National Basic Research Program of ChinaProjects(51274178,51090382)supported by theNational Natural Science Foundation of ChinaProject(KGCX2-EW-215)supported by the Key Deployment Program of ChineseAcademy of Sciences
文摘A series of innovative green metallurgical processes using novel reaction media including the NaOH/KOH sub-molten salt media and the NaOH-NaNO3 binary molten salt medium, for the extraction of vanadium and chromium from the vanadium slag have been developed. In comparison with the traditional sodium salt roasting technology, which operates at 850 ℃, the operation temperatures of these new processes drop to 200-400 ℃. Further, the extraction rates of vanadium and chromium utilizing the new approaches could reach 95% and 90%, respectively, significantly higher than those in the traditional roasting process, which are 75% and approximate zero, respectively. Besides, no hazardous gases and toxic tailings are discharged during the extraction process. Compared with the conventional roasting method, these new technologies show obvious advantages in terms of energy, environments, and the mineral resource utilization efficiency, providing an attractive alternative for the green technology upgrade of the vanadium production industries.
文摘In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.
文摘This study investigates the reduction in polarization measurement accuracy caused by varying in-cident angles in a liquid crystal variable retarder(LCVR).The phase delay characteristics of the LCVR were examined,with particular emphasis on the influence of different two-dimensional incident angles on phase delay behavior.Building upon the calibration of phase delay under normal incidence,a phase delay calibra-tion model was developed to account for variations in incident angle and driving voltage.A mathematical re-lationship was established between phase delay and the azimuth angle(α)and pitch angle(β).Experimental validation was conducted under three conditions:α=20°,β=0°;α=0°,β=20°;and an arbitrary angle whereα=5°,β=15°.The results demonstrated that the maximum average deviation between theoretical pre-dictions and experimental measurements did not exceed 0.059 rad.The proposed calibration method proved to be both accurate and practical.This approach offers robust support for LCVR parameter calibration and performance optimization in optical systems,particularly in polarization imaging applications.
基金supported by the National Natural Science Foundation of China(22278272)Natural Science Foundation of Liaoning Province(2024-MS-129).
文摘Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.
基金financial support from the Natural Science Foundation of Jiangsu Province(BK20220859)the Jiangsu Provincial Scientific Research Center of Applied Mathematics(BK20233002)+2 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_0473)the SEU Innovation Capability Enhancement Plan for Doctoral Students(CXJH_SEU 24144)supported by Open Research Fund of State Key Laboratory of Analytical Chemistry for Life Science,School of Chemistry and Chemical Engineering,Nanjing University。
文摘Soft machines harness material-level physical intelligence to perform adaptive tasks,enabling advancements in biomedical and human-machine interaction fields.Soft switches are the basic building blocks to achieve intelligent functions like autonomous decisions and mechanical computation.However,current soft switches suffer from complex fabrication processes,limited performance,and a lack of multimodal control,which hinder their practical application and the realization of machine intelligence.Herein,by harnessing the unique self-pinch and self-healing effects of the gallium-based liquid metals(LMs),we describe a soft high-performance electric switch composed of an LM line encapsulated within an elastomer.Applying pressure to deform the LM switch can increase local current density,leading to the electromagnetic self-pinch effect for switching off.After releasing pressure,the LM can spontaneously heal with the elastic recovery of the elastomer for switching on.This LM switch shows comprehensive advantages,including a compact design(0.5 mm×1.5 mm×10 mm),good stretchability(100%),high on/off ratio(~10^(9)),rapid response time(<100 ms),and excellent durability(>12000 cycles).Moreover,the LM switches enable multiple control modes,including magnetic and optical stimulation,through the integration of responsive materials.We demonstrate various LM switch-enabled functional soft machines,such as an interactive flexible gripper,a self-oscillating soft crawler,and wearable logic gates.This work will open new avenues for the application of LM in intelligent soft machines and advanced wearable electronics.
基金supports for this project from the National Natural Science Foundation of China(22378295).
文摘This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization using high-speed camera imaging.The T-junction microchannel has a cross-sectional width of 0.6 mm and a total length of 27.3 mm.The solution of cyclohexane with 2%and 3%mass concentrations of sorbitan trioleate surfactant were used as the continuous phase,and water was used as the dispersed phase.Slug flow,characteristic of squeezing regime,were predominantly observed.The effects of liquid–liquid two-phase flow rate ratio,and dimensionless number on droplet size,and pressure drop were investigated.The squeezing regime was mapped for 0.0005≤Ca_(c)≤0.0052(capillary number)and 0.1≤q≤10(flow rate ratio).The pressure drops of slugs were in the range from 40 Pa to 200 Pa.The slug lengths were measured between 1 mm and 9 mm.A universal flow map dependent on Ca_(c)Re_(d)^(0.5) are projected to investigate the droplet formation behavior in T-junction microchannel.Correlation expressions are proposed to predict pressure drops and the slug lengths for liquid–liquid two-phase flow in a square T-junction microchannel,using dimensionless numbers such as flow rate ratio and capillary number.The result shows that large continuous phase flow rates facilitate smaller slugs,whereas higher dispersed phase flow rates result in longer shorts.
基金financially supported by the National Natural Science Foundation of China(Nos.22005226 and 52203124)Center for Carbon Neutral Chemistry,Institute of Chemistry,Chinese Academy of Sciences(No.CCNC-202402)+1 种基金the Basic and Advanced Research Project from Wuhan Science and Technology Bureau(No.2022013988065201)Hubei Integrative Technology and Innovation Center for Advanced Fiberous Materials,project(No.XC2024G3013)。
文摘As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.
基金supported by the National Natural Science Foundation of China (Grant Nos.12274014 and 12534009)the Guangdong Provincial Quantum Science Strategic Initiative (Grant No.GDZX2501006)+4 种基金the Special Project in Key Areas for Universities in Guangdong Province (Grant No.2023ZDZX3054)the Dongguan Key Laboratory of Artificial Intelligence Design for Advanced Materialssupported by the U.S.Department of Energy,Office of Basic Energy Sciences (Grant No.DE-FG02-06ER46305) for DMRG studies on unconventional superconductivitysupported by the SongShan Lake HPC Center (SSL-HPC) at Great Bay University (X.Y.J.and S.S.G.)supported in part by the US National Science Foundation (Grant No.DMR-2406524) (D.N.S.)。
文摘The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0.36,we studied the kagome-lattice t-J model using state-of-the-art density matrix renormalization group calculations.On the L_(y)=3 cylinder(Ly is the number of unit cells along the circumferential direction),we established a quantum phase diagram with an increasing doping level.In addition to the charge density wave states at lower doping levels,we found an emergent Fermi-liquid-like phase by melting the holon Wigner crystal at δ≈0.15,which is characterized by the suppression of charge density oscillation and power-law decay of various correlation functions.For a wider L_(y)=4 cylinder,the bond-dimension extrapolated correlation functions also support such a Fermi-liquid-like state,suggesting its stability with increasing system size.In a narrow doping range near δ=1/3 for the L_(y)=3 cylinder,we find a state with an exponential decay of the single-particle correlation,but the other correlation functions preserve the features in the Fermi-liquid-like phase,which may be a precursor of a superconducting state.Nevertheless,this peculiar state nearδ=1/3 disappears for the L_(y)=4 cylinder,implying a possible lattice-size dependence.Our results reveal quantum melting from a holon Wigner crystal to a Fermi-liquid-like state with increasing hole density and suggest a doping regime to explore superconductivity in future studies.
文摘The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))and Zn(BF_(4))_(2),the supramolecular gelatorβ-cyclodextrin(β-CD)was added,and then a gel electrolyte(CD-ILZE)for zinc-ion batteries was prepared through host-vip interaction betweenβ-CD and DMSO-ILZE electrolyte.The gel electrolyte has good conductivity between-30 and 80℃,which is found by fitting the Arrhenius equation that the gel electrolyte satisfies the liquid law within this temperature range.In addition,the supramolecular gel electrolyte can effectively decrease hydrogen evolution corrosion and the formation of zinc dendrites.Compared with the battery prepared by DMSO-ILZE electrolyte(about 1100 h),the prepared Zn||Zn battery exhibits a more stable cycle(over 2800 h)at a current density of 0.5 m A·cm^(-2).At 0.1 A·g^(-1),the prepared Zn||V_(2)O_(5)gel electrolyte cell has a capacity of 30 m Ah·g^(-1)and a capacity retention rate of 85.17%after more than 1500 cycles.The CD-ILZE supramolecular gel electrolyte can inhibit the formation of hydrogen evolution corrosion and zinc dendrites,and improve the cycling performance of the battery.
基金supported by the Research Projects of the Department of Education of Guangdong Province 2024ZDZX3079The financial support from the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011677)+4 种基金the Scientific and Technical Innovation Council of Shenzhen(20220812165832002)the Research Projects of Department of Education of Guangdong Province-2023GCZX015the Innovation Team Project of Guangdong(2022KCXTD055)the China Postdoctoral Science Foundation(Certificate Number:2024M763441)is gratefully acknowledgedsupported by the Postdoctoral Fellowship Program of CPSF under Grant Number GZB20250031 and Research Projects of the Department of Education of Guangdong Province 2023GCZX015。
文摘Despite the intrinsic durability of polymeric hole transport materials,poly-triarylamines(PTAA)-based inverted perovskite solar cells(PSCs)have lagged behind their counterparts in efficiency,primarily due to poor surface wettability,insufficient interfacial contact,and unfavorable energy level alignment at the PTAA/perovskite interface.Here,we report a highly effective interfacial engineering strategy employing the ionic liquid 1,3-dimethylimidazolium dimethyl phosphate(DMIMPH)as a multifunctional interfacial modifier.The incorporation of DMIMPH improves PTAA wettability,promoting the growth of high-quality perovskite films with enhanced interfacial contact.Concurrently,DMIMPH effectively tunes the energy levels of PTAA,enhances its electrical conductivity,and passivates interfacial defects with more efficient hole extraction and charge transport.Moreover,its interaction with residual PbI_(2) modulates perovskite crystallization kinetics,yielding highly crystalline perovskite films with enlarged grain sizes,reduced PbI_(2) residue,and suppressed trap densities.As a result,PTAA-based p-i-n PSCs employing this approach achieve a record certified power conversion efficiency(PCE)of 24.52%,with a champion efficiency of 25.12%—the highest certified value for PTAA-based perovskite devices to date.Impressively,the DMIMPH-modified PSCs without encapsulation maintained 87.48%of their initial efficiency after 1600 h in air.This strategy offers an effective pathway for advancing the performance and stability of polymer-based inverted PSCs.
基金Project supported by the National Key Research and Development Program of China(2022YFC2905800)National Natural Science Foundation of China(52374276,52274269)+2 种基金Yunnan Fundamental Re search Projects(202401AS070051)the Natural Science Foundation of Hubei Province of China(2024AFD123)Young Elite Scientists Sponsorship Program by CAST(YESS20200276)。
文摘The efficient flotation separation of rare earth elements(REEs)from gangue minerals is crucial in mineral processing.This study synthesized a quaternary ammonium salt ionic liquid collector,tetrabutylammonium salicylhydroxamate(T-S),and investigated its performance in separating bastnaesite and fluorite.T-S was synthesized from salicylhydroxamic acid(SHA)and tetrabutylammonium chloride(TBAC),and its molecular structure was characterized using Fourier transform infrared(FTIR)spectroscopy.Microflotation tests indicate that T-S outperforms SHA and TBAC in both collecting ability and selectivity for bastnaesite.Adsorption,zeta potential,and infrared spectroscopy measurements reveal that T-S exhibits stronger adsorption on bastnaesite compared to SHA and TBAC.X-ray photoelectron spectroscopy(XPS)and molecular dynamics simulations(MDS)results confirm that chemical adsorption occurs between Ce on the bastnaesite surface and the-C(=O)NHOH groups of T-S.Moreover,the interaction between T-S and the bastnaesite surface is stronger than that with the fluorite surface.This work provides valuable insights for designing ionic liquid collectors for the flotation separation of bastnaesite and fluorite.
基金funded by the National Natural Science Foundation of China(22308358,22208346,22421003)IPE Project for Frontier Basic Research(QYJC-2023-05)CAS Project for Young Scientists in Basic Research(YSBR-038).
文摘Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the development of melt crystallization is hampered by lacking solid–liquid equilibrium (SLE) data for some isomers.Therefore,the SLE data of both binary and ternary mixtures of 2,3-dimethylphenol (2,3-DMP),3,5-dimethylphenol (3,5-DMP),and 3,4-dimethylphenol (3,4-DMP) were determined by using differential scanning calorimetry in this work.Additionally,crystallographic analysis was conducted to investigate the thermodynamic characteristics of these mixtures.The experimental results indicated that all the systems investigated in this research exhibited eutectic behavior.The experimentally obtained SLE data were well correlated with the Wilson and non-random two-liquid models.The excess thermodynamic functions were calculated to analyze the types and intensities of the molecular interactions occurring in the mixtures.Furthermore,this study developed a model for the correlation between the theoretical crystallization yield and the actual cooling yield and final yield in melt crystallization.This study has furnished reliable data essential for developing and optimizing the melt crystallization process of mixtures of 2,3-DMP,3,5-DMP,and 3,4-DMP.
文摘Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection challenging,they are linked to problems.Diagnostic methods like imaging and tissue biopsy are only effective when the tumor has reached a size that can be identified.The liquid biopsy technique,the least intrusive and most convenient diagnostic method,is the subject of this review.It focuses on the significance of single cell analysis in examining uncommon cancer types.The many biomarkers found in bodily fluids and the cancer types they are linked to in children have been assessed,as has the potential route towards early detection and cancer recurrence forecasting.Combining the single cell liquid biopsy with the newest technologies,such as computational and multi-omics approaches,which have improved the efficiency of processing massive and unique genetic data,appears promising.This article discusses on a number of case reports for uncommon pediatric malignancies,such as Neuroblastoma,Medulloblastoma,Wilms Tumor,Rhabdomyosarcoma,Ewing Sarcoma,and Retinoblastoma,as well as their liquid biopsy profiles.Furthermore,the findings raise ethical questions regarding the therapeutic application of the technology as well as possible difficulties related to clinical translation.The likelihood that this single cell liquid biopsy will be clinically validated and eventually used as a routine diagnostic tool for uncommon pediatric cancers will rise with the realistic approach to sensitivity monitoring,specificity upgrading,and optimization.
文摘The integration of multi-omic liquid biopsies with artificial intelligence(AI)represents a rapidly evolving frontier in early cancer detection,offering the potential to enhance personalized medicine and improve patient outcomes.This review explores the current state and emerging directions of this approach,focusing on the synergistic value of combining genomics,epigenomics,transcriptomics,proteomics,and metabolomics with AIdriven analytics.We discuss advances in multi-analyte blood tests such as CancerSEEK,which have demonstrated promising multi-cancer detection capabilities in early studies,as well as efforts to integrate liquid biopsy data with imaging modalities to improve diagnostic performance.The review also highlights ongoing challenges,including the need for greater analytical sensitivity,improved specificity for early-stage disease,standardization of workflows,and harmonization with existing screening modalities.We outline the prospective—but still largely investigational—impact of these technologies on cancer management,including early detection,treatment monitoring,and minimal residual disease assessment,along with their potential economic implications.Ultimately,we envision a future in which multi-omic liquid biopsies integrated with AI may contribute to more effective,noninvasive cancer detection strategies,while recognizing that substantial validation,regulatory approval,and health-system integration are required before widespread clinical adoption can occur.
