The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can ...The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.展开更多
We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibriu...We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibrium adsorption constant.Four distinct dynamic behaviors appear in the phase diagram: shrinking to dissolution, expanding to bursting, shrinking to stability, and expanding to stability. Special boundary states are identified in phase diagram, where the continuous growth of nanobubbles can take place even under very weak gas–surface interaction or with very small initial bubble size. Surface adsorption plays a critical role in the stability, lifetime, radius, and contact angle of nanobubbles, thereby demonstrating that pinning is not a prerequisite for stabilization. Furthermore, stable equilibrium nanobubbles exhibit a characteristic range of footprint radius, a limited height, and a small contact angle, consistent with experimental observations.展开更多
The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the elect...The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the electromagnetic force,flow field,temperature field,and Joule heat in front of the solid-liquid interface in directional solidification with the pulsed magnetic field are simulated.The calculation results show that the largest electromagnetic force in the melt appears near the solid-liquid interface,and the electromagnetic force is distributed in a gradient.There are intensive electromagnetic vibrations in front of the solid-liquid interface.The forced melt convection is mainly concentrated in front of the solid-liquid interface,accompanied by a larger flow velocity.The simulation results indicate that the grain refinement is attributed to that the electromagnetic vibration and forced convection increase the nucleation rate and the probability of dendrite fragments survival,for making dendrite easily fragmented,homogenizing the melt temperature,and increasing the undercooling in front of the solid-liquid interface.展开更多
Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site ins...Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site insight reaction process.In this study,large-scaled semiconductor films with multi-walled(TiO_(2)/WO_(3)/TiO_(2))nanopore distribution are fabricated by combining electrochemical anodization and sputtering technique,and then employed as the SERS substrates for detection of molecules at the solid/liquid interfaces.Given the remarkably improved electrochromic property of the multi-walled film,such SERS substrates were endowed with tunable oxygen vacancy(VO)density and distribution via simply applying electrochemical bias voltage,which enabled one to achieve an enhanced charge transfer efficiency and thus a remarkably increased Raman signal even in solution.The VO-rich SERS substrate is highly repeatable,thus providing a reliable platform for in-situ monitoring of the target molecules or intermediates at the solid/liquid interfaces.展开更多
The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacen...The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Electrochemical transfer behavior of V ⅤW 11 -V Ⅴ 3W 9 heteropoly anions on the water/nitrobenzene interface was investigated by means of cyclic voltammetry. The effect of the solution acidity on the transfe...Electrochemical transfer behavior of V ⅤW 11 -V Ⅴ 3W 9 heteropoly anions on the water/nitrobenzene interface was investigated by means of cyclic voltammetry. The effect of the solution acidity on the transfer behavior and the stable pH range for the heteropoly anions were studied. The stability of mixed tungstovanadate decreases with increasing the number of vanadium atoms. The main transfer species within the potential window have the negative charges of 4 and the transfer process is diffusion controlled. The apparent transfer potential Δ w o Ψ 0 and the free energy Δ G 0 w→o tr for the heteropoly anions can be obtained from the experimental data. For the different anions, the Δ w o Ψ 1/2 pH relationship can be expressed as: Δ w o Ψ 1/2 =constant-53pH.展开更多
The solid/liquid interface of a directionally solidified Ni-base superalloy with different phosphorus contents was quantitatively described by means of fractat method.When the solidification rate was fixed,the relatio...The solid/liquid interface of a directionally solidified Ni-base superalloy with different phosphorus contents was quantitatively described by means of fractat method.When the solidification rate was fixed,the relationship between the fractal dimensionality of the solid/liquid interface and the phos- phorus content of the test alloy was given.Combined the thermodynamics and fractal theory,the ef- fect mechanism of phosphorus content on fractal dimensionality of the solid/liquid interface was discussed.展开更多
The oxidation of hydroquinone(QH_2) was investigated for the first time at liquid/liquid(L/L) interface by scanning electrochemical microscopy(SECM).In this study,electron transfer(ET) from QH_2 in aqueous to ferrocen...The oxidation of hydroquinone(QH_2) was investigated for the first time at liquid/liquid(L/L) interface by scanning electrochemical microscopy(SECM).In this study,electron transfer(ET) from QH_2 in aqueous to ferrocene(Fc) in nitrobenzene (NB) was probed.The apparent heterogeneous rate constants for ET reactions were obtained by fitting the experimental approach curves to the theoretical values.The results showed that the rate constants for oxidation reaction of QH_2 were sensitive to the changes of the dri...展开更多
Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectificatio...Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectification phenomenon in an asymmetric solid–liquid–solid sandwiched system with a nano-structured interface.By using the non-equilibrium molecular dynamics simulations,the thermal transport through the solid–liquid–solid system is examined,and the thermal rectification phenomenon can be observed.It is revealed that the thermal rectification effect can be attributed to the significant difference in the interfacial thermal resistance between Cassie and Wenzel states when reversing the temperature bias.In addition,effects of the liquid density,solid–liquid bonding strength and nanostructure size on the thermal rectification are examined.The findings may provide a new way for designs of certain thermal devices.展开更多
Comparison in electron transfer(ET) processes from decamethyferrocene(DMFe) in nitrobenzene(NB) to ferric ion in aqueous phase was investigated for the first time by the scanning electrochemical microscopy(SECM).As co...Comparison in electron transfer(ET) processes from decamethyferrocene(DMFe) in nitrobenzene(NB) to ferric ion in aqueous phase was investigated for the first time by the scanning electrochemical microscopy(SECM).As compared with the system of Fe(CN)_6^(3-)-DMFe,the ET rate obtained from Fe^(3+)-DMFe was lower in spite of larger driving force,which may arise from the effect of reorganization energy.Otherwise,the effect of common ion on rate constants was also probed and results suggested additional complexit...展开更多
The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average til...The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.展开更多
Two‐dimensional organic semiconductor single crystals(2D OSSCs)represent the promising candidates for the construction of high‐performance electronic and optoelectronic devices due to their ultrathin thicknesses,fre...Two‐dimensional organic semiconductor single crystals(2D OSSCs)represent the promising candidates for the construction of high‐performance electronic and optoelectronic devices due to their ultrathin thicknesses,free of grain boundaries,and long‐range ordered molecular structures.In recent years,substantial efforts have been devoted to the fabrication of the large‐sized and layer‐controlled 2D OSSCs at the liquid‐liquid interface.This unique interface could act as the molecular flat and defect‐free substrate for regulating the nucleation and growth processes and enabling the formation of large‐sized ultrathin 2D OSSCs.Therefore,this review focuses on the liquid-liquid interface‐assisted growth methods for the controllable preparation of 2D OSSCs,with a particular emphasis on the advantages and limitations of the corresponding methods.Furthermore,the typical methods employed to control the crystal sizes,morphologies,structures,and orientations of 2D OSSCs at the liquid-liquid interface are discussed in detail.Then,the recent progresses on the 2D OSSCs‐based optoelectronic devices,such as organic field‐effect transistors,ambipolar transistors,and phototransistors are highlighted.Finally,the key challenges and further outlook are proposed in order to promote the future development of the 2D OSSCs in the field of the next‐generation organic optoelectronic devices.展开更多
This paper is concerned with the dispersion of particles on the fluid-liquid interface. In a previous study we have shown that when small particles, e.g., flour, pollen, glass beads, etc., contact an air-liquid interf...This paper is concerned with the dispersion of particles on the fluid-liquid interface. In a previous study we have shown that when small particles, e.g., flour, pollen, glass beads, etc., contact an air-liquid interface, they disperse rapidly as if they were in an explosion. The rapid dispersion is due to the fact that the capillary force pulls particles into the interface causing them to accelerate to a large velocity. In this paper we show that motion of particles normal to the interface is inertia dominated; they oscillate vertically about their equilibrium position before coming to rest under viscous drag. This vertical motion of a particle causes a radially-outward lateral （secondary） flow on the interface that causes nearby particles to move away. The dispersion on a liquid-liquid interface, which is the primary focus of this study, was relatively weaker than on an air-liquid interface, and occurred over a longer period of time. When falling through an upper liquid the particles have a slower velocity than when falling through air because the liquid has a greater viscosity. Another difference for the liquid-liquid interface is that the separation of particles begins in the upper liquid before the particles reach the interface. The rate of dispersion depended on the size of the particles, the densities of the particle and liquids, the viscosities of the liquids involved, and the contact angle. For small particles, partial pinning and hysteresis of the three-phase contact line on the surface of the particle during adsorption on liquid-liquid interfaces was also important. The frequency of oscillation of particles about their floating equilibrium increased with decreasing particle size on both air-water and liquid-liquid interfaces, and the time to reach equilibrium decreased with decreasing particle size. These results are in agreement with our analysis.展开更多
The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronau...The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronautics,and astronautics,and therefore has drawn increasing research interests.To design preferential microstructure and optimize mechanical properties of the interconnects,it is crucial to understand the formation and growth mechanisms of diversified structures at the L/S interface during interconnecting.In situ synchrotron radiation or tube-generated X-ray radiography and tomography technologies make it possible to observe the evolution of the L/S interface directly and therefore have greatly propelled the research in this field.Here,we review the recent progress in understanding the L/S interface behaviors using advanced in situ X-ray imaging techniques with a particular focus on the following two issues:(1)interface behaviors in the solder joints for microelectronic packaging including the intermetallic compounds(IMCs)during refl ow,Sn dendrites,and IMCs during solidification and refl ow porosities and(2)growth characteristics and morphological transition of IMCs in the interconnect of dissimilar metals at high temperature.Furthermore,the main achievements and future research perspectives in terms of metallurgical bonding mechanisms under complex conditions with improved X-ray sources and detectors are remarked and discussed.展开更多
Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrol...Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.展开更多
The detailed understanding of various underlying processes at liquid/solid interfaces requires the development of interface-sensitive and high-resolution experimental techniques with atomic precision.In this perspecti...The detailed understanding of various underlying processes at liquid/solid interfaces requires the development of interface-sensitive and high-resolution experimental techniques with atomic precision.In this perspective,we review the recent advances in studying the liquid/solid interfaces at atomic level by electrochemical scanning tunneling microscope(EC-STM),non-contact atomic force microscopy(NC-AFM),and surface-sensitive vibrational spectroscopies.Different from the ultrahigh vacuum and cryogenic experiments,these techniques are all operated in situ under ambient condition,making the measurements close to the native state of the liquid/solid interface.In the end,we present some perspectives on emerging techniques,which can defeat the limitation of existing imaging and spectroscopic methods in the characterization of liquid/solid interfaces.展开更多
The molecular dynamic simulation results for the liquid-vapor interface of the pure Lennard-Jones fluid are presented. The thermodynamic properties, the surface tension and the effective thickness of interfa-cial laye...The molecular dynamic simulation results for the liquid-vapor interface of the pure Lennard-Jones fluid are presented. The thermodynamic properties, the surface tension and the effective thickness of interfa-cial layer are determined. The rough characteristic of the liquid-vapor interface is discussed with fractional Brownian motion theory. Thereupon the fractal dimension d of the liquid-vapor interface is obtained.展开更多
The structural and dynamical properties of hexafluoroacetylacetone(HFA) and acetylacetone(AA) at the water/supercritical CO2(Sc-CO2) interface at 20 MPa and 318.15 K are investigated by molecular dynamics simulations....The structural and dynamical properties of hexafluoroacetylacetone(HFA) and acetylacetone(AA) at the water/supercritical CO2(Sc-CO2) interface at 20 MPa and 318.15 K are investigated by molecular dynamics simulations.The TIP3P potential is used for water and the EPM2 model is for CO2.The water phase and SC-CO2 phase form a distinct immiscible liquid-liquid interface.The two chelating molecules show interfacial preference.Comparatively,the AA molecules show somewhat more preference for interfacial region,whereas the HFA molecules are preferably near the Sc-CO2 phase.The orientational distribution of the β-diketone molecules and the radial distribution functions between β-diketones and solvents are obtained in order to study the microscopic structural properties of the β-diketones at the water-SC-CO2 interface.It is found that the translational diffusion and rotational diffusion of HFA and AA are obviously anisotropic and decrease as the β-diketone molecules approach the interface.The anisotropic dynamic behavior for the solute molecules is related to the corresponding structural properties.展开更多
Flow regimes of two immiscible liquids at the cross junction within a rectangular microchannel are experimentally investigated.Characteristics of the flow regimes including critical conditions and interfacial deformat...Flow regimes of two immiscible liquids at the cross junction within a rectangular microchannel are experimentally investigated.Characteristics of the flow regimes including critical conditions and interfacial deformations are presented.It is found that the occurrence of the tubing regime is favored by increased viscosity of the dispersed phase or reduced cross-sectional aspect ratio,leading to the shrinkage of the flow rate range that could produce droplets.In order to reveal the physical mechanism,the force analysis is carried out based on the tunnel structure formed between the interface and channel side walls within the rectangular cross-section.The reshaping stage and pinch-off stage are mainly driven by the interfacial tension,leading to far larger neck thinning rate compared to the superficial velocity of either phase.The filling stage and squeezing stage are dominated by the pressure drop across the dispersed tip while the role of the shear force becomes more important with increasing tunnel width.The filling period is estimated as t2≈kHwn02/Qd with k=1.34 and the squeezing period is expressed as t3/Tc=0.3Cac−1.According to the force analysis,the critical tip velocity under dripping scales with three key parameters,which can be expressed as(utip/U)*~QcLtip/wtunnel3.展开更多
A discharge ignited by an AC power source in contact with deionized water as one of the electrodes is investigated.Immediately after initiation,the discharge exhibits a unique phenomenon:the gas-phase discharge is ext...A discharge ignited by an AC power source in contact with deionized water as one of the electrodes is investigated.Immediately after initiation,the discharge exhibits a unique phenomenon:the gas-phase discharge is extended into the liquid.Later,a cone-like structure is observed at the liquid surface.Synchronous monitoring of current–voltage characteristics and liquid properties versus time suggests that the discharge shapes are functions of the liquid properties.The spatio-temporal profiles indicate the potential effects of water,ambient air impurities,and metastable argon on the discharge chemistry.This becomes more obvious near the liquid surface due to increasing production of various transient reactive species such as centerdot OH and NO centerdot.Moreover,it is revealed that thermalization of the rotational population distributions of the rotational states(N′⩽6,J′⩽13/2)in the Q1 branch of the OH(A2Σ+,υ′=0→X2Π3/2,υ′′=0)band ro-vibrational system is influenced by the humid environment near the liquid surface.In addition,the transient behaviors of instantaneous concentrations of long-lived reactive species(LRS)such as H2O2,NO−2,and NO−3 are observed with lengthening the discharge time.The production of multiple transient and LRS proposes AC excited gas–liquid argon discharge as a potential applicant in industrial wastewater cleaning,clinical medicine,and agriculture.展开更多
基金German research Foundation(DFG,grant numbers:CH2321/1–1 and SCHO1231/7–1)JH has received a scholarship from the Chinese Scholarship Council(CSC No.:201908350115).
文摘The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.
基金Project supported by the Natural Science Foundation of Guangxi Zhuang Autonomous Region, China (Grant No. 2022GXNSFAA035487)the National Natural Science Foundation of China (Grant Nos. 12272100, 11474285, and 12074382)+2 种基金the Graduate Education Innovation Project of Guangxi Zhuang Autonomous Region, China (Grant No. XJCY2022012)the Guangxi Normal University Ideological and Political Demonstration Course Construction Project (Grant Nos. 2022kcsz15 and 2023kcsz29)the Innovation Project of Graduate Education of Guangxi Zhuang Autonomous Region, China (Grant No. YCBZ2024087)。
文摘We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibrium adsorption constant.Four distinct dynamic behaviors appear in the phase diagram: shrinking to dissolution, expanding to bursting, shrinking to stability, and expanding to stability. Special boundary states are identified in phase diagram, where the continuous growth of nanobubbles can take place even under very weak gas–surface interaction or with very small initial bubble size. Surface adsorption plays a critical role in the stability, lifetime, radius, and contact angle of nanobubbles, thereby demonstrating that pinning is not a prerequisite for stabilization. Furthermore, stable equilibrium nanobubbles exhibit a characteristic range of footprint radius, a limited height, and a small contact angle, consistent with experimental observations.
基金financially supported by the National Natural Science Foundation of China (No. 51674236)the Key Research and Development Program of Liaoning Province (No.2019JH2/10100009)+1 种基金the National Science and Technology Major Project (No.2017-Ⅵ-0003-0073)the National Key Research and Development Program (No.2018Y-FA0702900)。
文摘The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the electromagnetic force,flow field,temperature field,and Joule heat in front of the solid-liquid interface in directional solidification with the pulsed magnetic field are simulated.The calculation results show that the largest electromagnetic force in the melt appears near the solid-liquid interface,and the electromagnetic force is distributed in a gradient.There are intensive electromagnetic vibrations in front of the solid-liquid interface.The forced melt convection is mainly concentrated in front of the solid-liquid interface,accompanied by a larger flow velocity.The simulation results indicate that the grain refinement is attributed to that the electromagnetic vibration and forced convection increase the nucleation rate and the probability of dendrite fragments survival,for making dendrite easily fragmented,homogenizing the melt temperature,and increasing the undercooling in front of the solid-liquid interface.
基金supported by National Natural Science Foundation of China(Nos.21874013,22074013 and 22073030)the Fundamental Research Funds for the Central Universities(Nos.N2105018 and N2005027)+1 种基金the China Postdoctoral Science Foundation(No.2019M661109)supported by the Supercomputer Centre of East China Normal University(ECNU Public Platform for Innovation No.001).
文摘Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site insight reaction process.In this study,large-scaled semiconductor films with multi-walled(TiO_(2)/WO_(3)/TiO_(2))nanopore distribution are fabricated by combining electrochemical anodization and sputtering technique,and then employed as the SERS substrates for detection of molecules at the solid/liquid interfaces.Given the remarkably improved electrochromic property of the multi-walled film,such SERS substrates were endowed with tunable oxygen vacancy(VO)density and distribution via simply applying electrochemical bias voltage,which enabled one to achieve an enhanced charge transfer efficiency and thus a remarkably increased Raman signal even in solution.The VO-rich SERS substrate is highly repeatable,thus providing a reliable platform for in-situ monitoring of the target molecules or intermediates at the solid/liquid interfaces.
基金supported by the National Science Foundation of China(No.20775060 and No.20875077)the National Science Foundation of Gansu(No.0701RJZA109 and No.0803RJZA105)and the Key Laboratory of Polymer Materials of Gansu Province
文摘The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金Supported by the NaturalScienceFoundation of China( No.2 0 2 75 0 31) ,the Teaching and Research Award Programfor Outstanding Young Techers in High Education of MOE of China and KJCX- 0 1of Northwest Normal University
文摘Electrochemical transfer behavior of V ⅤW 11 -V Ⅴ 3W 9 heteropoly anions on the water/nitrobenzene interface was investigated by means of cyclic voltammetry. The effect of the solution acidity on the transfer behavior and the stable pH range for the heteropoly anions were studied. The stability of mixed tungstovanadate decreases with increasing the number of vanadium atoms. The main transfer species within the potential window have the negative charges of 4 and the transfer process is diffusion controlled. The apparent transfer potential Δ w o Ψ 0 and the free energy Δ G 0 w→o tr for the heteropoly anions can be obtained from the experimental data. For the different anions, the Δ w o Ψ 1/2 pH relationship can be expressed as: Δ w o Ψ 1/2 =constant-53pH.
文摘The solid/liquid interface of a directionally solidified Ni-base superalloy with different phosphorus contents was quantitatively described by means of fractat method.When the solidification rate was fixed,the relationship between the fractal dimensionality of the solid/liquid interface and the phos- phorus content of the test alloy was given.Combined the thermodynamics and fractal theory,the ef- fect mechanism of phosphorus content on fractal dimensionality of the solid/liquid interface was discussed.
基金supported by the Natural Science Foundation of China(No.20775060,No.20875077 and No. 20927004)the Natural Science Foundation of Gansu(No.0701RJZA109 and No.0803RJZA105)Key Projects of Scientific Research Base of Department of Education,Gansu Province(No.08zx-07)
文摘The oxidation of hydroquinone(QH_2) was investigated for the first time at liquid/liquid(L/L) interface by scanning electrochemical microscopy(SECM).In this study,electron transfer(ET) from QH_2 in aqueous to ferrocene(Fc) in nitrobenzene (NB) was probed.The apparent heterogeneous rate constants for ET reactions were obtained by fitting the experimental approach curves to the theoretical values.The results showed that the rate constants for oxidation reaction of QH_2 were sensitive to the changes of the dri...
基金the National Natural Science Foundation of China(Grant No.51976002)the Beijing Nova Program of Science and Technology(Grant No.Z191100001119033)。
文摘Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectification phenomenon in an asymmetric solid–liquid–solid sandwiched system with a nano-structured interface.By using the non-equilibrium molecular dynamics simulations,the thermal transport through the solid–liquid–solid system is examined,and the thermal rectification phenomenon can be observed.It is revealed that the thermal rectification effect can be attributed to the significant difference in the interfacial thermal resistance between Cassie and Wenzel states when reversing the temperature bias.In addition,effects of the liquid density,solid–liquid bonding strength and nanostructure size on the thermal rectification are examined.The findings may provide a new way for designs of certain thermal devices.
基金supported by the National Natural Science Foundation of China(No.20875077,No.20775060 and No.20927004)the Natural Science Foundation of Gansu(No.0701RJZA109 and No.0803RJZA105)Key Projects of Scientific Research Base of Department of Education,Gansu Province(No.08zx-07).
文摘Comparison in electron transfer(ET) processes from decamethyferrocene(DMFe) in nitrobenzene(NB) to ferric ion in aqueous phase was investigated for the first time by the scanning electrochemical microscopy(SECM).As compared with the system of Fe(CN)_6^(3-)-DMFe,the ET rate obtained from Fe^(3+)-DMFe was lower in spite of larger driving force,which may arise from the effect of reorganization energy.Otherwise,the effect of common ion on rate constants was also probed and results suggested additional complexit...
基金supported by the National Natural Science Foundation of China (Nos. 21227802, 21303216 and 21473217)
文摘The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.
基金National Natural Science Foundation of China,Grant/Award Numbers:51821002,52173178,52225303Science and Technology Development Fund of the Macao Special Administrative Region,Grant/Award Number:0145/2022/A3+1 种基金Suzhou Gusu innovation and entrepreneurship leading talent project,Grant/Award Number:ZXL2023342Jiangsu Provincial Department of Science and Technology leading technology basic research major project,Grant/Award Number:BK20232041。
文摘Two‐dimensional organic semiconductor single crystals(2D OSSCs)represent the promising candidates for the construction of high‐performance electronic and optoelectronic devices due to their ultrathin thicknesses,free of grain boundaries,and long‐range ordered molecular structures.In recent years,substantial efforts have been devoted to the fabrication of the large‐sized and layer‐controlled 2D OSSCs at the liquid‐liquid interface.This unique interface could act as the molecular flat and defect‐free substrate for regulating the nucleation and growth processes and enabling the formation of large‐sized ultrathin 2D OSSCs.Therefore,this review focuses on the liquid-liquid interface‐assisted growth methods for the controllable preparation of 2D OSSCs,with a particular emphasis on the advantages and limitations of the corresponding methods.Furthermore,the typical methods employed to control the crystal sizes,morphologies,structures,and orientations of 2D OSSCs at the liquid-liquid interface are discussed in detail.Then,the recent progresses on the 2D OSSCs‐based optoelectronic devices,such as organic field‐effect transistors,ambipolar transistors,and phototransistors are highlighted.Finally,the key challenges and further outlook are proposed in order to promote the future development of the 2D OSSCs in the field of the next‐generation organic optoelectronic devices.
文摘This paper is concerned with the dispersion of particles on the fluid-liquid interface. In a previous study we have shown that when small particles, e.g., flour, pollen, glass beads, etc., contact an air-liquid interface, they disperse rapidly as if they were in an explosion. The rapid dispersion is due to the fact that the capillary force pulls particles into the interface causing them to accelerate to a large velocity. In this paper we show that motion of particles normal to the interface is inertia dominated; they oscillate vertically about their equilibrium position before coming to rest under viscous drag. This vertical motion of a particle causes a radially-outward lateral （secondary） flow on the interface that causes nearby particles to move away. The dispersion on a liquid-liquid interface, which is the primary focus of this study, was relatively weaker than on an air-liquid interface, and occurred over a longer period of time. When falling through an upper liquid the particles have a slower velocity than when falling through air because the liquid has a greater viscosity. Another difference for the liquid-liquid interface is that the separation of particles begins in the upper liquid before the particles reach the interface. The rate of dispersion depended on the size of the particles, the densities of the particle and liquids, the viscosities of the liquids involved, and the contact angle. For small particles, partial pinning and hysteresis of the three-phase contact line on the surface of the particle during adsorption on liquid-liquid interfaces was also important. The frequency of oscillation of particles about their floating equilibrium increased with decreasing particle size on both air-water and liquid-liquid interfaces, and the time to reach equilibrium decreased with decreasing particle size. These results are in agreement with our analysis.
基金supported by the National Key Research and Development Program(Nos.2017YFA0403800 and 2017YFB0305301)the National Natural Science Foundation of ChinaExcellent Young Scholars(No.51922068)+1 种基金the National Natural Science Foundation of China(Nos.51727802,51821001 and 51904187)funded by China Postdoctoral Science Foundation(No.2019M661500)。
文摘The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronautics,and astronautics,and therefore has drawn increasing research interests.To design preferential microstructure and optimize mechanical properties of the interconnects,it is crucial to understand the formation and growth mechanisms of diversified structures at the L/S interface during interconnecting.In situ synchrotron radiation or tube-generated X-ray radiography and tomography technologies make it possible to observe the evolution of the L/S interface directly and therefore have greatly propelled the research in this field.Here,we review the recent progress in understanding the L/S interface behaviors using advanced in situ X-ray imaging techniques with a particular focus on the following two issues:(1)interface behaviors in the solder joints for microelectronic packaging including the intermetallic compounds(IMCs)during refl ow,Sn dendrites,and IMCs during solidification and refl ow porosities and(2)growth characteristics and morphological transition of IMCs in the interconnect of dissimilar metals at high temperature.Furthermore,the main achievements and future research perspectives in terms of metallurgical bonding mechanisms under complex conditions with improved X-ray sources and detectors are remarked and discussed.
文摘Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.
文摘The detailed understanding of various underlying processes at liquid/solid interfaces requires the development of interface-sensitive and high-resolution experimental techniques with atomic precision.In this perspective,we review the recent advances in studying the liquid/solid interfaces at atomic level by electrochemical scanning tunneling microscope(EC-STM),non-contact atomic force microscopy(NC-AFM),and surface-sensitive vibrational spectroscopies.Different from the ultrahigh vacuum and cryogenic experiments,these techniques are all operated in situ under ambient condition,making the measurements close to the native state of the liquid/solid interface.In the end,we present some perspectives on emerging techniques,which can defeat the limitation of existing imaging and spectroscopic methods in the characterization of liquid/solid interfaces.
基金Funded by the National Natural Science Foundation of China( No. 50076048)
文摘The molecular dynamic simulation results for the liquid-vapor interface of the pure Lennard-Jones fluid are presented. The thermodynamic properties, the surface tension and the effective thickness of interfa-cial layer are determined. The rough characteristic of the liquid-vapor interface is discussed with fractional Brownian motion theory. Thereupon the fractal dimension d of the liquid-vapor interface is obtained.
基金Supported by the National Natural Science Foundation of China （20776066, 20476044） and the Specialized Research Fund for the Doctoral Program of Higher Education of China （20060291002）.
文摘The structural and dynamical properties of hexafluoroacetylacetone(HFA) and acetylacetone(AA) at the water/supercritical CO2(Sc-CO2) interface at 20 MPa and 318.15 K are investigated by molecular dynamics simulations.The TIP3P potential is used for water and the EPM2 model is for CO2.The water phase and SC-CO2 phase form a distinct immiscible liquid-liquid interface.The two chelating molecules show interfacial preference.Comparatively,the AA molecules show somewhat more preference for interfacial region,whereas the HFA molecules are preferably near the Sc-CO2 phase.The orientational distribution of the β-diketone molecules and the radial distribution functions between β-diketones and solvents are obtained in order to study the microscopic structural properties of the β-diketones at the water-SC-CO2 interface.It is found that the translational diffusion and rotational diffusion of HFA and AA are obviously anisotropic and decrease as the β-diketone molecules approach the interface.The anisotropic dynamic behavior for the solute molecules is related to the corresponding structural properties.
基金This work was supported by the National Natural Science Foundation of China(Grants 11872083 and 11702007)the China Postdoctoral Science Foundation(Grant 2020M680270)+1 种基金the Beijing Postdoctoral Research Foundation(Grant 2020-ZZ-075)the Chaoyang District Postdoctoral Research Foundation(Grant 2020ZZ-40).
文摘Flow regimes of two immiscible liquids at the cross junction within a rectangular microchannel are experimentally investigated.Characteristics of the flow regimes including critical conditions and interfacial deformations are presented.It is found that the occurrence of the tubing regime is favored by increased viscosity of the dispersed phase or reduced cross-sectional aspect ratio,leading to the shrinkage of the flow rate range that could produce droplets.In order to reveal the physical mechanism,the force analysis is carried out based on the tunnel structure formed between the interface and channel side walls within the rectangular cross-section.The reshaping stage and pinch-off stage are mainly driven by the interfacial tension,leading to far larger neck thinning rate compared to the superficial velocity of either phase.The filling stage and squeezing stage are dominated by the pressure drop across the dispersed tip while the role of the shear force becomes more important with increasing tunnel width.The filling period is estimated as t2≈kHwn02/Qd with k=1.34 and the squeezing period is expressed as t3/Tc=0.3Cac−1.According to the force analysis,the critical tip velocity under dripping scales with three key parameters,which can be expressed as(utip/U)*~QcLtip/wtunnel3.
基金by National Natural Science Foundation of China(No.51578309)。
文摘A discharge ignited by an AC power source in contact with deionized water as one of the electrodes is investigated.Immediately after initiation,the discharge exhibits a unique phenomenon:the gas-phase discharge is extended into the liquid.Later,a cone-like structure is observed at the liquid surface.Synchronous monitoring of current–voltage characteristics and liquid properties versus time suggests that the discharge shapes are functions of the liquid properties.The spatio-temporal profiles indicate the potential effects of water,ambient air impurities,and metastable argon on the discharge chemistry.This becomes more obvious near the liquid surface due to increasing production of various transient reactive species such as centerdot OH and NO centerdot.Moreover,it is revealed that thermalization of the rotational population distributions of the rotational states(N′⩽6,J′⩽13/2)in the Q1 branch of the OH(A2Σ+,υ′=0→X2Π3/2,υ′′=0)band ro-vibrational system is influenced by the humid environment near the liquid surface.In addition,the transient behaviors of instantaneous concentrations of long-lived reactive species(LRS)such as H2O2,NO−2,and NO−3 are observed with lengthening the discharge time.The production of multiple transient and LRS proposes AC excited gas–liquid argon discharge as a potential applicant in industrial wastewater cleaning,clinical medicine,and agriculture.
