Blade vibration monitoring can ensure the safe operation of aeroengine rotor blades.Among the methods of blade vibration monitoring,Blade Tip Timing(BTT)method has attracted more and more attention because of its adva...Blade vibration monitoring can ensure the safe operation of aeroengine rotor blades.Among the methods of blade vibration monitoring,Blade Tip Timing(BTT)method has attracted more and more attention because of its advantages of non-contact measurement.However,it is difficult to install the Once-Per-Revolution(OPR)probe in the confined space of aeroengine,and the failure and instability of the OPR signal will reduce the reliability of the blade vibration analysis results,which directly affects the accuracy of the blade vibration parameters identification.The Multi-Probe linear fitting and Time of Arrival(ToA)Linear Correction method based on the BTT(MP-LC-BTT)without OPR is proposed to reduce the errors of single probe linear fitting method for blade vibration displacement analysis.The proposed method can also correct the calculation error of blade vibration displacement due to the nonlinear change of rotation speed,which can improve the analysis accuracy of the blade vibration displacement.A new blade vibration model conforming to the actual vibration characteristics is established,and the effectiveness of the proposed method is verified by numerical simulation.Finally,the reliability and accuracy of the MP-LC-BTT method have been verified by the experiments which include two high-speed blade test-benches and an industrial axial fan.This method can be used in the actual aero-engine monitoring instead of the BTT method with OPR.展开更多
For physical ozone absorption without reaction,two parametric estimation methods,i.e.the common linear least square fitting and non-linear Simplex search methods,were applied,respectively,to determine the ozone mass t...For physical ozone absorption without reaction,two parametric estimation methods,i.e.the common linear least square fitting and non-linear Simplex search methods,were applied,respectively,to determine the ozone mass transfer coefficient during absorption and both methods give almost the same mass transfer coefficient.While for chemical absorption with ozone decomposition reaction,the common linear least square fitting method is not applicable for the evaluation of ozone mass transfer coefficient due to the difficulty of model linearization for describing ozone concentration dissolved in water.The nonlinear Simplex method obtains the mass transfer coefficient by minimizing the sum of the differences between the simulated and experimental ozone concentration during the whole absorption process,without the limitation of linear relationship between the dissolved ozone concentration and absorption time during the initial stage of absorption.Comparison of the ozone concentration profiles between the simulation and experimental data demonstrates that Simplex method may determine ozone mass transfer coefficient during absorption in an accurate and high efficiency way with wide applicability.展开更多
Similarity coefficient mapping（SCM） aims to improve the morphological evaluation of T＊2weighted magnetic resonance imaging（T＊2-w MRI）. However, how to interpret the generated SCM map is still pending. Moreover, ...Similarity coefficient mapping（SCM） aims to improve the morphological evaluation of T＊2weighted magnetic resonance imaging（T＊2-w MRI）. However, how to interpret the generated SCM map is still pending. Moreover, is it probable to extract tissue dissimilarity messages based on the theory behind SCM？ The primary purpose of this paper is to address these two questions. First, the theory of SCM was interpreted from the perspective of linear fitting. Then, a term was embedded for tissue dissimilarity information. Finally, our method was validated with sixteen human brain image series from multiecho T＊2-w MRI. Generated maps were investigated from signal-to-noise ratio（SNR） and perceived visual quality, and then interpreted from intra- and inter-tissue intensity. Experimental results show that both perceptibility of anatomical structures and tissue contrast are improved. More importantly, tissue similarity or dissimilarity can be quantified and cross-validated from pixel intensity analysis. This method benefits image enhancement, tissue classification, malformation detection and morphological evaluation.展开更多
By using the method of least square linear fitting to analyze data do not exist errors under certain conditions, in order to make the linear data fitting method that can more accurately solve the relationship expressi...By using the method of least square linear fitting to analyze data do not exist errors under certain conditions, in order to make the linear data fitting method that can more accurately solve the relationship expression between the volume and quantity in scientific experiments and engineering practice, this article analyzed data error by commonly linear data fitting method, and proposed improved process of the least distance squ^re method based on least squares method. Finally, the paper discussed the advantages and disadvantages through the example analysis of two kinds of linear data fitting method, and given reasonable control conditions for its application.展开更多
How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vib...How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vibration and protecting the structural safety. In this paper, the displacement reconstruction method based on cubic spline fitting is put forward to reconstruct the dynamic displacement of slender flexible structures without the knowledge of modeshapes and applied loading. The obtained strains and displacements are compared with the results calculated by ABAQUS to check the method's validity. It can be found that the proposed method can accurately identify the strains and displacement of slender flexible structures undergoing linear vibrations, nonlinear vibrations, and parametric vibrations. Under the concentrated force, the strains of slender flexible structures will change suddenly along the axial direction. With locally densified measurement points, the present reconstruction method still works well for the strain concentration problem.展开更多
Parameters that need to be fitted in High-Strength concrete mix proportion expe riment and two equation models that are referenced in the experiment are discuss ed. The reasoning and implement of the corresponding lin...Parameters that need to be fitted in High-Strength concrete mix proportion expe riment and two equation models that are referenced in the experiment are discuss ed. The reasoning and implement of the corresponding linear fitting algorithm ar e demonstrated.Parmeter fitting is realized by value estimate method of mathemat ical statistics.This paper combines mathematical statisitics,linear equations an d template thought together successfully and discussed an efficient parameter fi tting method based on strength equation model and water consumption equation mod el.展开更多
In this paper,characteristics of spatial and temporal variation of linear fitting goodness before some moderately strong earthquakes(Ms≥5.0)in the eastern part of China(east of longitude 180)are studied according to ...In this paper,characteristics of spatial and temporal variation of linear fitting goodness before some moderately strong earthquakes(Ms≥5.0)in the eastern part of China(east of longitude 180)are studied according to the famous Gutenberg-Richter’s relation expressed as lgN=a-bM,by using the moderate and small events that occurred in and around the source area.The results show that the linear goodness of fitting varies abnormally prior to these moderately strong earthquakes.In the early stage of the earthquake preparatory process,distribution of the energy released through small events in and around the source area is isostatic and the fitting goodness approximates 1,while the distribution of the energy turns to be isostatic before moderately strong earthquakes,leading to the obvious decrease of the linear goodness of fitting.This phenomenon could be a medium term anomaly and a medium term criterion for moderately strong earthquake prediction.展开更多
We show an interesting empirical formula of quark masses here, which is obtained by implementing the east squares fit. In this formula the measured QCD coupling is almost a ＂best fitting coupling＂.
Modelling and simulation of projectile flight is at the core of ballistic computer software and is essential to the study of performance of rifles and projectiles in various engagement conditions.An effective and repr...Modelling and simulation of projectile flight is at the core of ballistic computer software and is essential to the study of performance of rifles and projectiles in various engagement conditions.An effective and representative numerical model of projectile flight requires a relatively good approximation of the aerodynamics.The aerodynamic coefficients of the projectile model should be described as a series of piecewise polynomial functions of the Mach number that ideally meet the following conditions:they are continuous,differentiable at least once,and have a relatively low degree.The paper provides the steps needed to generate such piecewise polynomial functions using readily available tools,and then compares Piecewise Cubic Hermite Interpolating Polynomial(PCHIP),cubic splines,and piecewise linear functions,and their variant,as potential curve fitting methods to approximate the aerodynamics of a generic small arms projectile.A key contribution of the paper is the application of PCHIP to the approximation of projectile aerodynamics,and its evaluation against a set of criteria.Finally,the paper provides a baseline assessment of the impact of the polynomial functions on flight trajectory predictions obtained with 6-degree-of-freedom simulations of a generic projectile.展开更多
In many real-world applications of evolutionary algorithms,the fitness of an individual requires a quantitative measure.This paper proposes a self-adaptive linear evolutionary algorithm （ALEA） in which we introduce ...In many real-world applications of evolutionary algorithms,the fitness of an individual requires a quantitative measure.This paper proposes a self-adaptive linear evolutionary algorithm （ALEA） in which we introduce a novel strategy for evaluating individual＇s relative strengths and weaknesses.Based on this strategy,searching space of constrained optimization problems with high dimensions for design variables is compressed into two-dimensional performance space in which it is possible to quickly identify ＇good＇ individuals of the performance for a multiobjective optimization application,regardless of original space complexity.This is considered as our main contribution.In addition,the proposed new evolutionary algorithm combines two basic operators with modification in reproduction phase,namely,crossover and mutation.Simulation results over a comprehensive set of benchmark functions show that the proposed strategy is feasible and effective,and provides good performance in terms of uniformity and diversity of solutions.展开更多
<p> <span style="font-family:Verdana;">To address the drawbacks of the traditional Parker test in multivariate linear</span><span style="font-family:;" "=""> ...<p> <span style="font-family:Verdana;">To address the drawbacks of the traditional Parker test in multivariate linear</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">models:</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">the process is cumbersome and computationally intensive,</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">we propose a new heteroscedasticity test.</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">A new heteroskedasticity test is proposed using the fitted values of the samples as new explanatory variables, reconstructing the regression model, and giving a new heteroskedasticity test based on the significance test of the coefficients, it is also compared with the existing Parker test which is improved using the principal component idea. Numerical simulations and empirical analyses show that the improved Parker test with the fitted values of the samples proposed in this paper is superior.</span> </p>展开更多
Bilevel linear programming, which consists of the objective functions of the upper level and lower level, is a useful tool for modeling decentralized decision problems. Various methods are proposed for solving this pr...Bilevel linear programming, which consists of the objective functions of the upper level and lower level, is a useful tool for modeling decentralized decision problems. Various methods are proposed for solving this problem. Of all the algorithms, the ge- netic algorithm is an alternative to conventional approaches to find the solution of the bilevel linear programming. In this paper, we describe an adaptive genetic algorithm for solving the bilevel linear programming problem to overcome the difficulty of determining the probabilities of crossover and mutation. In addition, some techniques are adopted not only to deal with the difficulty that most of the chromosomes maybe infeasible in solving constrained optimization problem with genetic algorithm but also to improve the efficiency of the algorithm. The performance of this proposed algorithm is illustrated by the examples from references.展开更多
Aiming at the problems of low accuracy,long time consumption,and failure to obtain quantita-tive fault identification results of existing automatic fault identification technic,a fault recognition method based on clus...Aiming at the problems of low accuracy,long time consumption,and failure to obtain quantita-tive fault identification results of existing automatic fault identification technic,a fault recognition method based on clustering linear regression is proposed.Firstly,Hough transform is used to detect the line segment of the enhanced image obtained by the coherence cube algorithm.Secondly,the endpoint of the line segment detected by Hough transform is taken as the key point,and the adaptive clustering linear regression algorithm is used to cluster the key points adaptively according to the lin-ear relationship between them.Finally,a fault is generated from each category of key points based on least squares curve fitting method to realize fault identification.To verify the feasibility and pro-gressiveness of the proposed method,it is compared with the traditional method and the latest meth-od on the actual seismic data through experiments,and the effectiveness of the proposed method is verified by the experimental results on the actual seismic data.展开更多
基金supports of the National Science and Technology Major Project,China(No.2017-Ⅲ-0009-0035)the Major Program of National Natural Science Foundation of China(No.51790513).
文摘Blade vibration monitoring can ensure the safe operation of aeroengine rotor blades.Among the methods of blade vibration monitoring,Blade Tip Timing(BTT)method has attracted more and more attention because of its advantages of non-contact measurement.However,it is difficult to install the Once-Per-Revolution(OPR)probe in the confined space of aeroengine,and the failure and instability of the OPR signal will reduce the reliability of the blade vibration analysis results,which directly affects the accuracy of the blade vibration parameters identification.The Multi-Probe linear fitting and Time of Arrival(ToA)Linear Correction method based on the BTT(MP-LC-BTT)without OPR is proposed to reduce the errors of single probe linear fitting method for blade vibration displacement analysis.The proposed method can also correct the calculation error of blade vibration displacement due to the nonlinear change of rotation speed,which can improve the analysis accuracy of the blade vibration displacement.A new blade vibration model conforming to the actual vibration characteristics is established,and the effectiveness of the proposed method is verified by numerical simulation.Finally,the reliability and accuracy of the MP-LC-BTT method have been verified by the experiments which include two high-speed blade test-benches and an industrial axial fan.This method can be used in the actual aero-engine monitoring instead of the BTT method with OPR.
基金Project(2011467001)supported by the Ministry of Environment Protection of ChinaProject(2010DFB94130)supported by the Ministry of Science and Technology of China
文摘For physical ozone absorption without reaction,two parametric estimation methods,i.e.the common linear least square fitting and non-linear Simplex search methods,were applied,respectively,to determine the ozone mass transfer coefficient during absorption and both methods give almost the same mass transfer coefficient.While for chemical absorption with ozone decomposition reaction,the common linear least square fitting method is not applicable for the evaluation of ozone mass transfer coefficient due to the difficulty of model linearization for describing ozone concentration dissolved in water.The nonlinear Simplex method obtains the mass transfer coefficient by minimizing the sum of the differences between the simulated and experimental ozone concentration during the whole absorption process,without the limitation of linear relationship between the dissolved ozone concentration and absorption time during the initial stage of absorption.Comparison of the ozone concentration profiles between the simulation and experimental data demonstrates that Simplex method may determine ozone mass transfer coefficient during absorption in an accurate and high efficiency way with wide applicability.
基金Project supported in part by the National High Technology Research and Development Program of China(Grant Nos.2015AA043203 and 2012AA02A604)the National Natural Science Foundation of China(Grant Nos.81171402+8 种基金61471349and 81501463)the Innovative Research Team Program of Guangdong Province,China(Grant No.2011S013)the Science and Technological Program for Higher Education,Science and Researchand Health Care Institutions of Guangdong ProvinceChina(Grant No.2011108101001)the Natural Science Foundation of Guangdong Province,China(Grant No.2014A030310360)the Fundamental Research Program of Shenzhen City,China(Grant No.JCYJ20140417113430639)Beijing Center for Mathematics and Information Interdisciplinary Sciences,China
文摘Similarity coefficient mapping（SCM） aims to improve the morphological evaluation of T＊2weighted magnetic resonance imaging（T＊2-w MRI）. However, how to interpret the generated SCM map is still pending. Moreover, is it probable to extract tissue dissimilarity messages based on the theory behind SCM？ The primary purpose of this paper is to address these two questions. First, the theory of SCM was interpreted from the perspective of linear fitting. Then, a term was embedded for tissue dissimilarity information. Finally, our method was validated with sixteen human brain image series from multiecho T＊2-w MRI. Generated maps were investigated from signal-to-noise ratio（SNR） and perceived visual quality, and then interpreted from intra- and inter-tissue intensity. Experimental results show that both perceptibility of anatomical structures and tissue contrast are improved. More importantly, tissue similarity or dissimilarity can be quantified and cross-validated from pixel intensity analysis. This method benefits image enhancement, tissue classification, malformation detection and morphological evaluation.
文摘By using the method of least square linear fitting to analyze data do not exist errors under certain conditions, in order to make the linear data fitting method that can more accurately solve the relationship expression between the volume and quantity in scientific experiments and engineering practice, this article analyzed data error by commonly linear data fitting method, and proposed improved process of the least distance squ^re method based on least squares method. Finally, the paper discussed the advantages and disadvantages through the example analysis of two kinds of linear data fitting method, and given reasonable control conditions for its application.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51679167 and 51525803)
文摘How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vibration and protecting the structural safety. In this paper, the displacement reconstruction method based on cubic spline fitting is put forward to reconstruct the dynamic displacement of slender flexible structures without the knowledge of modeshapes and applied loading. The obtained strains and displacements are compared with the results calculated by ABAQUS to check the method's validity. It can be found that the proposed method can accurately identify the strains and displacement of slender flexible structures undergoing linear vibrations, nonlinear vibrations, and parametric vibrations. Under the concentrated force, the strains of slender flexible structures will change suddenly along the axial direction. With locally densified measurement points, the present reconstruction method still works well for the strain concentration problem.
基金Funded by the State "the Tenth five year Plan" Item (2001BA307B01 02 01)
文摘Parameters that need to be fitted in High-Strength concrete mix proportion expe riment and two equation models that are referenced in the experiment are discuss ed. The reasoning and implement of the corresponding linear fitting algorithm ar e demonstrated.Parmeter fitting is realized by value estimate method of mathemat ical statistics.This paper combines mathematical statisitics,linear equations an d template thought together successfully and discussed an efficient parameter fi tting method based on strength equation model and water consumption equation mod el.
文摘In this paper,characteristics of spatial and temporal variation of linear fitting goodness before some moderately strong earthquakes(Ms≥5.0)in the eastern part of China(east of longitude 180)are studied according to the famous Gutenberg-Richter’s relation expressed as lgN=a-bM,by using the moderate and small events that occurred in and around the source area.The results show that the linear goodness of fitting varies abnormally prior to these moderately strong earthquakes.In the early stage of the earthquake preparatory process,distribution of the energy released through small events in and around the source area is isostatic and the fitting goodness approximates 1,while the distribution of the energy turns to be isostatic before moderately strong earthquakes,leading to the obvious decrease of the linear goodness of fitting.This phenomenon could be a medium term anomaly and a medium term criterion for moderately strong earthquake prediction.
基金The project supported by National Natural Science Foundation of China under Grant No. 10235040, The author is very grateful to Prof. J. Ferrandis for reading the manuscript and helpful comments.
文摘We show an interesting empirical formula of quark masses here, which is obtained by implementing the east squares fit. In this formula the measured QCD coupling is almost a ＂best fitting coupling＂.
文摘Modelling and simulation of projectile flight is at the core of ballistic computer software and is essential to the study of performance of rifles and projectiles in various engagement conditions.An effective and representative numerical model of projectile flight requires a relatively good approximation of the aerodynamics.The aerodynamic coefficients of the projectile model should be described as a series of piecewise polynomial functions of the Mach number that ideally meet the following conditions:they are continuous,differentiable at least once,and have a relatively low degree.The paper provides the steps needed to generate such piecewise polynomial functions using readily available tools,and then compares Piecewise Cubic Hermite Interpolating Polynomial(PCHIP),cubic splines,and piecewise linear functions,and their variant,as potential curve fitting methods to approximate the aerodynamics of a generic small arms projectile.A key contribution of the paper is the application of PCHIP to the approximation of projectile aerodynamics,and its evaluation against a set of criteria.Finally,the paper provides a baseline assessment of the impact of the polynomial functions on flight trajectory predictions obtained with 6-degree-of-freedom simulations of a generic projectile.
基金supported by the National Natural Science Foundation of China(No.60803049,60472060)
文摘In many real-world applications of evolutionary algorithms,the fitness of an individual requires a quantitative measure.This paper proposes a self-adaptive linear evolutionary algorithm （ALEA） in which we introduce a novel strategy for evaluating individual＇s relative strengths and weaknesses.Based on this strategy,searching space of constrained optimization problems with high dimensions for design variables is compressed into two-dimensional performance space in which it is possible to quickly identify ＇good＇ individuals of the performance for a multiobjective optimization application,regardless of original space complexity.This is considered as our main contribution.In addition,the proposed new evolutionary algorithm combines two basic operators with modification in reproduction phase,namely,crossover and mutation.Simulation results over a comprehensive set of benchmark functions show that the proposed strategy is feasible and effective,and provides good performance in terms of uniformity and diversity of solutions.
文摘<p> <span style="font-family:Verdana;">To address the drawbacks of the traditional Parker test in multivariate linear</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">models:</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">the process is cumbersome and computationally intensive,</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">we propose a new heteroscedasticity test.</span><span style="font-family:;" "=""> </span><span style="font-family:Verdana;">A new heteroskedasticity test is proposed using the fitted values of the samples as new explanatory variables, reconstructing the regression model, and giving a new heteroskedasticity test based on the significance test of the coefficients, it is also compared with the existing Parker test which is improved using the principal component idea. Numerical simulations and empirical analyses show that the improved Parker test with the fitted values of the samples proposed in this paper is superior.</span> </p>
基金the National Natural Science Foundation of China(Nos.60574071 and70771080)
文摘Bilevel linear programming, which consists of the objective functions of the upper level and lower level, is a useful tool for modeling decentralized decision problems. Various methods are proposed for solving this problem. Of all the algorithms, the ge- netic algorithm is an alternative to conventional approaches to find the solution of the bilevel linear programming. In this paper, we describe an adaptive genetic algorithm for solving the bilevel linear programming problem to overcome the difficulty of determining the probabilities of crossover and mutation. In addition, some techniques are adopted not only to deal with the difficulty that most of the chromosomes maybe infeasible in solving constrained optimization problem with genetic algorithm but also to improve the efficiency of the algorithm. The performance of this proposed algorithm is illustrated by the examples from references.
基金the National Natural Science Foundation of China(No.41804135)the Key Laboratory of Petroleum Resources Research,Institute of Geology and Geophysics,Chinese Academy of Sciences,Open Project(No.KLOR2018-9)the Beijing Information Science and Technology University Research Fund Project(No.2025025).
文摘Aiming at the problems of low accuracy,long time consumption,and failure to obtain quantita-tive fault identification results of existing automatic fault identification technic,a fault recognition method based on clustering linear regression is proposed.Firstly,Hough transform is used to detect the line segment of the enhanced image obtained by the coherence cube algorithm.Secondly,the endpoint of the line segment detected by Hough transform is taken as the key point,and the adaptive clustering linear regression algorithm is used to cluster the key points adaptively according to the lin-ear relationship between them.Finally,a fault is generated from each category of key points based on least squares curve fitting method to realize fault identification.To verify the feasibility and pro-gressiveness of the proposed method,it is compared with the traditional method and the latest meth-od on the actual seismic data through experiments,and the effectiveness of the proposed method is verified by the experimental results on the actual seismic data.
