The isothermal local loading forming technology provides a feasible way to form Ti-alloy large-scale rib-web components in aerospace and aviation fields.However,the local loading process forming limit is restricted by...The isothermal local loading forming technology provides a feasible way to form Ti-alloy large-scale rib-web components in aerospace and aviation fields.However,the local loading process forming limit is restricted by forming defects in the transitional region.In this work,the feasibility of controlling forming defects and improving the process forming limit by adjusting die parameters is explored through finite element（FE） simulation.It is found that the common cavum and folding defects in the transitional region are significantly influenced by the fillet radii of left rib and middle rib,respectively.The cavum and folding defects can be effectively controlled by increasing the fillet radii of left rib and middle rib,respectively.The process forming limits considering forming defects in the transitional region are determined by the stepwise searching method under various die parameters.Moreover,the relationship between the process forming limit and die parameters is developed through the response surface methodology（RSM）.The developed RSM models suggest that increasing the fillet radii of left and middle ribs is effective to improve the process forming limit during local loading forming of rib-web components.The results will provide technical basis for the design of die parameters and the reduction amount,which is of great importance to control forming defects and improve the process forming limit in local loading forming of Ti-alloy large-scale rib-web components.展开更多
The deformation characters and load status of the blank＇s potential fracture zone are analyzed at the moment when blank is approaching to punch comer in drawing process of cone shape part. Based on tension instabilit...The deformation characters and load status of the blank＇s potential fracture zone are analyzed at the moment when blank is approaching to punch comer in drawing process of cone shape part. Based on tension instability theory, the formula for calculating fracture limit load of cone shape part in drawing process is derived. Also, the formula is analyzed and verified by experiment.展开更多
Direct propylene epoxidation with H2 and O2,an attractive process to produce propylene oxide(PO),has a potential explosion danger due to the coexistence of flammable gases(i.e.,C3 H6 and H2)and oxidizer(i.e.,O2).The u...Direct propylene epoxidation with H2 and O2,an attractive process to produce propylene oxide(PO),has a potential explosion danger due to the coexistence of flammable gases(i.e.,C3 H6 and H2)and oxidizer(i.e.,O2).The unknown explosion limits of the multi-component feed gas mixture make it difficult to optimize the reaction process under safe operation conditions.In this work,a distribution method is proposed and verified to be effective by comparing estimated and experimental explosion limits of more than 200 kinds of flammable gas mixture.Then,it is employed to estimate the explosion limits of the feed gas mixture,some results of which are also validated by the classic Le Chatelier’s Rule and flammable resistance method.Based on the estimated explosion limits,process optimization is carried out using commercially high and inherently safe reactant concentrations to enhance reaction performance.The promising results are directly obtained through the interface called gOPT in gPROMS only by using a simple,easy-constructed and mature packed-bed reactor,such as the PO yield of 13.3%,PO selectivity of 85.1%and outlet PO fraction of 1.8%.These results can be rationalized by indepth analyses and discussion about the effects of the decision variables on the operation safety and reaction performance.The insights revealed here could shed new light on the process development of the PO production based on the estimation of the explosion limits of the multi-component feed gas mixture containing flammable gase s,inert gas and O2,followed by process optimization.展开更多
Let X<sub>1</sub>,X<sub>2</sub>,…, Y<sub>1</sub>,Y<sub>2</sub>,…, T<sub>1</sub>,T<sub>2</sub>,…be independent random variables such thatX<s...Let X<sub>1</sub>,X<sub>2</sub>,…, Y<sub>1</sub>,Y<sub>2</sub>,…, T<sub>1</sub>,T<sub>2</sub>,…be independent random variables such thatX<sub>i</sub> are real-valued and have a common continuous distribution function F. Y<sub>i</sub> are extendedreal-valued and have a common distribution G and T<sub>i</sub> are extended real-valued and have acommon distribution funtion D. The nonparametric maximum likelihood estimator of Fbased on X<sub>1</sub>,…, X<sub>n</sub> is the empirical distribution function F<sub>n</sub>.展开更多
In this paper, the near-critical and super-critical asymptotic behavior of a reversible Markov process as a chemical model for polymerization was studied. The results of the present paper, together with an analysis of...In this paper, the near-critical and super-critical asymptotic behavior of a reversible Markov process as a chemical model for polymerization was studied. The results of the present paper, together with an analysis of the sub-critical stage, establish the existence of three distinct stages (sub-critical, near-critical and super-critical stages) of polymerization (in the thermodynamic limit as N --> +infinity,),depending on the value of strength of the fragmentation reaction. These three stages correspond to the size of the largest length of polymers of size N to be itself of order log N, Nm/m+1 (m greater than or equal to 2, m not equal 4n, n greater than or equal to 1) and N, respectively.展开更多
We consider a discrete time Storage Process Xn with a simple random walk input Sn and a random release rule given by a family {Ux, x ≥ 0} of random variables whose probability laws {Ux, x ≥ 0} form a convolution sem...We consider a discrete time Storage Process Xn with a simple random walk input Sn and a random release rule given by a family {Ux, x ≥ 0} of random variables whose probability laws {Ux, x ≥ 0} form a convolution semigroup of measures, that is, μx × μy = μx + y The process Xn obeys the equation: X0 = 0, U0 = 0, Xn = Sn - USn, n ≥ 1. Under mild assumptions, we prove that the processes and are simple random walks and derive a SLLN and a CLT for each of them.展开更多
The traditional printing checking method always uses printing control strips,but the results are not very well in repeatability and stability. In this paper,the checking methods for printing quality basing on image ar...The traditional printing checking method always uses printing control strips,but the results are not very well in repeatability and stability. In this paper,the checking methods for printing quality basing on image are taken as research objects. On the base of the traditional checking methods of printing quality,combining the method and theory of digital image processing with printing theory in the new domain of image quality checking,it constitute the checking system of printing quality by image processing,and expound the theory design and the model of this system. This is an application of machine vision. It uses the high resolution industrial CCD(Charge Coupled Device) colorful camera. It can display the real-time photographs on the monitor,and input the video signal to the image gathering card,and then the image data transmits through the computer PCI bus to the memory. At the same time,the system carries on processing and data analysis. This method is proved by experiments. The experiments are mainly about the data conversion of image and ink limit show of printing.展开更多
We consider a modified Lnshnikov process as a model of a chemical polymer ization anf study the asymptotic behavior (in the thermodynamic limit;as N →∞)of a particular probability distribution on the set of N-dimens...We consider a modified Lnshnikov process as a model of a chemical polymer ization anf study the asymptotic behavior (in the thermodynamic limit;as N →∞)of a particular probability distribution on the set of N-dimensional vectors,tile kth component of which is the number of k-mers.The study study establisles the existence of three stages (subcritical,near-critical and supercritical stages)of polymerization,dependenting upon the ratio of association and dissociation rates of f polymers.The present paper concentrates on the analysis of tile subcritical stage.In the sibcritical.stages we show that tile size of the largest length of polymers of stize N is of the order.log N as N →+∞.展开更多
Management of groundwater resources and remediation of groundwater pollution require reliable quantification of contaminant dynamics in natural aquifers, which can involve complex chemical dynamics and challenge tradi...Management of groundwater resources and remediation of groundwater pollution require reliable quantification of contaminant dynamics in natural aquifers, which can involve complex chemical dynamics and challenge traditional modeling approaches. The kinetics of chemical reactions in groundwater are well known to be controlled by medium heterogeneity and reactant mixing, motivating the development of particle-based Lagrangian approaches. Previous Lagrangian solvers have been limited to fundamental bimolecular reactions in typically one-dimensional porous media. In contrast to other existing studies, this study developed a fully Lagrangian framework, which was used to simulate diffusion-controlled, multi-step reactions in one-, two-, and three-dimensional porous media. The interaction radius of a reactant molecule, which controls the probability of reaction, was derived by the agent-based approach for both irreversible and reversible reactions. A flexible particle tracking scheme was then developed to build trajectories for particles undergoing mixing-limited, multi-step reactions. The simulated particle dynamics were checked against the kinetics for diffusion-controlled reactions and thermodynamic wellmixed reactions in one-and two-dimensional domains. Applicability of the novel simulator was further tested by(1) simulating precipitation of calcium carbonate minerals in a two-dimensional medium, and(2) quantifying multi-step chemical reactions observed in the laboratory. The flexibility of the Lagrangian simulator allows further refinement to capture complex transport affecting chemical mixing and hence reactions.展开更多
With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of eleme...With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of elements are in the samples but are also eager to accomplish quantitative detection with LIBS. There are several means to improve the limit of detection and stability, which are important to quantitative detection, especially of trace elements, increasing the laser energy and the resolution of spectrometer, using dual pulse setup, vacuuming the ablation environment etc. All of these methods are about to update the hardware system, which is effective but expensive. So we establish the following spectrum data processing methods to improve the trace elements analysis in this paper： spectrum sifting, noise filtering, and peak fitting. There are small algorithms in these three method groups, which we will introduce in detail. Finally, we discuss how these methods affect the results of trace elements detection in an experiment to analyze the lead content in Chinese cabbage.展开更多
This paper gives a characterization of a Hunt process path by the first exit left limit distribution. It is also showed that if the first exit left limit distribution leaving any ball from the center is a uniform dist...This paper gives a characterization of a Hunt process path by the first exit left limit distribution. It is also showed that if the first exit left limit distribution leaving any ball from the center is a uniform distribution on the sphere, then the Levy Processes are a scaled Brownian motion.展开更多
The flow shop scheduling problem with limited buffers( LBFSP) widely exists in manufacturing systems. A hybrid discrete harmony search algorithm is proposed for the problem to minimize total flow time. The algorithm p...The flow shop scheduling problem with limited buffers( LBFSP) widely exists in manufacturing systems. A hybrid discrete harmony search algorithm is proposed for the problem to minimize total flow time. The algorithm presents a novel discrete improvisation and a differential evolution scheme with the jobpermutation-based representation. Moreover,the discrete harmony search is hybridized with the problem-dependent local search based on insert neighborhood to balance the global exploration and local exploitation. In addition, an orthogonal experiment design is employed to provide a receipt for turning the adjustable parameters of the algorithm. Comparisons based on the Taillard benchmarks indicate the superiority of the proposed algorithm in terms of effectiveness and efficiency.展开更多
It is demonstrated that “survival of the fittest” approach suffers fundamental flaw planted in its very goal: reaching a uniform state starting from a minor random event. Simple considerations prove that a generic p...It is demonstrated that “survival of the fittest” approach suffers fundamental flaw planted in its very goal: reaching a uniform state starting from a minor random event. Simple considerations prove that a generic property of any such state is its global instability. That is why a new approach to the evolution is put forward. It conjectures equilibrium for systems put in an ever-changing environment. The importance of this issue lies in the view that an ever-changing environment is much closer to the natural environment where the biological species live in. The major goal of the present paper is to demonstrate that a specific form of dynamical equilibrium among certain mutations is established in each and every stable in a long-run system. Major result of our considerations is that neither mutation nor either kind dominates forever because a temporary dynamical equilibrium is replaced with another one in the time course. It will be demonstrated that the evolution of those pieces of equilibrium is causal, yet not predetermined process.展开更多
In order to meet the demands for high transmission rates and high service quality in broadband wireless communication systems, orthogonal frequency division multiplexing （OFDM） has been adopted in some standards. Ho...In order to meet the demands for high transmission rates and high service quality in broadband wireless communication systems, orthogonal frequency division multiplexing （OFDM） has been adopted in some standards. However, the inter-block interference （IBI） and inter-carrier interference （ICI） in an OFDM system affect the performance. To mitigate IBI and ICI, some pre-processing approaches have been proposed based on full channel state information （CSI）, which improved the system performance. A pre-processing filter based on partial CSI at the transmitter is designed and investigated. The filter coefficient is given by the optimization processing, the symbol error rate （SER） is tested, and the computation complexity of the proposed scheme is analyzed. Computer simulation results show that the proposed pre-processing filter can effectively mitigate IBI and ICI and the performance can be improved. Compared with pre-processing approaches at the transmitter based on full CSI, the proposed scheme has high spectral efficiency, limited CSI feedback and low computation complexity.展开更多
Suppose that E and F are separable Banach spaces, X and Y are independent symmetric E and F-valued random vectors respectively. This paper is devoted to the study of the central limit theorem for X Y in the injective...Suppose that E and F are separable Banach spaces, X and Y are independent symmetric E and F-valued random vectors respectively. This paper is devoted to the study of the central limit theorem for X Y in the injective and projective tensor product spaces E F and E F. Special attention is paid to l2 l2. In addition, two counter-examples are given.展开更多
The aim of this study was to establish a control system for saccharification process using quality control charts. To achieve this goal, temperature, pH and brix were measured at 12 minutes intervals for 15 consecutiv...The aim of this study was to establish a control system for saccharification process using quality control charts. To achieve this goal, temperature, pH and brix were measured at 12 minutes intervals for 15 consecutive batches which took 2 hours each. The time variations for three process parameters were assessed to establish a good understanding of the saccharification process. The temperature varied between 58℃ and 62℃ while the pH decreased slowly due to oxidation, values of which varied between 5.7 and 5.0. Brix values increased linearly with time. The initial and final values of the three parameters varied from one batch to another. Of the three parameters, brix was not well represented on the quality control charts due to wide difference between initial and final values during saccharification. The final brix values varied between batches, from 10.6% to 11.6%. The control charts used in this study were X-bar and Range charts. The rules for interpreting control charts were implemented for both X-bar and R charts, results of which showed that the process was out of control, although some rules were not violated due to little number of batches studied. The values of for temperature and pH data (2.27℃ and 0.35, respectively) were lower compared to brix data (11.2%). The corresponding values of span between control limits, SP<sub>x</sub> and SP<sub>R</sub> for temperature and pH were also comparatively lower than those established from brix data. Due to larger values of for brix measurements, the corresponding control charts for brix were insensitive in identifying out-of-control points during saccharification process.展开更多
基金the support of the National Natural Science Foundation of China(Nos.51605388,51675433)111 Project(B08040)+2 种基金the Research Fund of the State Key Laboratory of Solidification Processing(NWPU)in China(Grant No.131-QP-2015)the Fundamental Research Funds for the Central Universitiesthe Open Research Fund of State Key Laboratory of Materials Processing and Die&Mold Technology at Huazhong University of Science and Technology
文摘The isothermal local loading forming technology provides a feasible way to form Ti-alloy large-scale rib-web components in aerospace and aviation fields.However,the local loading process forming limit is restricted by forming defects in the transitional region.In this work,the feasibility of controlling forming defects and improving the process forming limit by adjusting die parameters is explored through finite element（FE） simulation.It is found that the common cavum and folding defects in the transitional region are significantly influenced by the fillet radii of left rib and middle rib,respectively.The cavum and folding defects can be effectively controlled by increasing the fillet radii of left rib and middle rib,respectively.The process forming limits considering forming defects in the transitional region are determined by the stepwise searching method under various die parameters.Moreover,the relationship between the process forming limit and die parameters is developed through the response surface methodology（RSM）.The developed RSM models suggest that increasing the fillet radii of left and middle ribs is effective to improve the process forming limit during local loading forming of rib-web components.The results will provide technical basis for the design of die parameters and the reduction amount,which is of great importance to control forming defects and improve the process forming limit in local loading forming of Ti-alloy large-scale rib-web components.
基金This project is supported by Doctoral Education Foundation of Ministry ofEducation of China (No.96021602).
文摘The deformation characters and load status of the blank＇s potential fracture zone are analyzed at the moment when blank is approaching to punch comer in drawing process of cone shape part. Based on tension instability theory, the formula for calculating fracture limit load of cone shape part in drawing process is derived. Also, the formula is analyzed and verified by experiment.
基金Supported by the National Natural Science Foundation of China(91434117,21776077)the Shanghai Rising-Star Program(17QA1401200)+1 种基金the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learningthe Open Project of State Key Laboratory of Chemical Engineering(SKL-Che-15C03).
文摘Direct propylene epoxidation with H2 and O2,an attractive process to produce propylene oxide(PO),has a potential explosion danger due to the coexistence of flammable gases(i.e.,C3 H6 and H2)and oxidizer(i.e.,O2).The unknown explosion limits of the multi-component feed gas mixture make it difficult to optimize the reaction process under safe operation conditions.In this work,a distribution method is proposed and verified to be effective by comparing estimated and experimental explosion limits of more than 200 kinds of flammable gas mixture.Then,it is employed to estimate the explosion limits of the feed gas mixture,some results of which are also validated by the classic Le Chatelier’s Rule and flammable resistance method.Based on the estimated explosion limits,process optimization is carried out using commercially high and inherently safe reactant concentrations to enhance reaction performance.The promising results are directly obtained through the interface called gOPT in gPROMS only by using a simple,easy-constructed and mature packed-bed reactor,such as the PO yield of 13.3%,PO selectivity of 85.1%and outlet PO fraction of 1.8%.These results can be rationalized by indepth analyses and discussion about the effects of the decision variables on the operation safety and reaction performance.The insights revealed here could shed new light on the process development of the PO production based on the estimation of the explosion limits of the multi-component feed gas mixture containing flammable gase s,inert gas and O2,followed by process optimization.
基金Project supported by the National Natural Science Foundation of China.
文摘Let X<sub>1</sub>,X<sub>2</sub>,…, Y<sub>1</sub>,Y<sub>2</sub>,…, T<sub>1</sub>,T<sub>2</sub>,…be independent random variables such thatX<sub>i</sub> are real-valued and have a common continuous distribution function F. Y<sub>i</sub> are extendedreal-valued and have a common distribution G and T<sub>i</sub> are extended real-valued and have acommon distribution funtion D. The nonparametric maximum likelihood estimator of Fbased on X<sub>1</sub>,…, X<sub>n</sub> is the empirical distribution function F<sub>n</sub>.
基金supported in part by National NaturalScience Foundation of China!196610O3
文摘In this paper, the near-critical and super-critical asymptotic behavior of a reversible Markov process as a chemical model for polymerization was studied. The results of the present paper, together with an analysis of the sub-critical stage, establish the existence of three distinct stages (sub-critical, near-critical and super-critical stages) of polymerization (in the thermodynamic limit as N --> +infinity,),depending on the value of strength of the fragmentation reaction. These three stages correspond to the size of the largest length of polymers of size N to be itself of order log N, Nm/m+1 (m greater than or equal to 2, m not equal 4n, n greater than or equal to 1) and N, respectively.
基金Supported by the National Natural Science Foundation of China (10871200)
文摘In this article, we obtain the central limit theorem and the law of the iterated logarithm for Galton-Watson processes in i.i.d, random environments.
文摘We consider a discrete time Storage Process Xn with a simple random walk input Sn and a random release rule given by a family {Ux, x ≥ 0} of random variables whose probability laws {Ux, x ≥ 0} form a convolution semigroup of measures, that is, μx × μy = μx + y The process Xn obeys the equation: X0 = 0, U0 = 0, Xn = Sn - USn, n ≥ 1. Under mild assumptions, we prove that the processes and are simple random walks and derive a SLLN and a CLT for each of them.
文摘The traditional printing checking method always uses printing control strips,but the results are not very well in repeatability and stability. In this paper,the checking methods for printing quality basing on image are taken as research objects. On the base of the traditional checking methods of printing quality,combining the method and theory of digital image processing with printing theory in the new domain of image quality checking,it constitute the checking system of printing quality by image processing,and expound the theory design and the model of this system. This is an application of machine vision. It uses the high resolution industrial CCD(Charge Coupled Device) colorful camera. It can display the real-time photographs on the monitor,and input the video signal to the image gathering card,and then the image data transmits through the computer PCI bus to the memory. At the same time,the system carries on processing and data analysis. This method is proved by experiments. The experiments are mainly about the data conversion of image and ink limit show of printing.
文摘We consider a modified Lnshnikov process as a model of a chemical polymer ization anf study the asymptotic behavior (in the thermodynamic limit;as N →∞)of a particular probability distribution on the set of N-dimensional vectors,tile kth component of which is the number of k-mers.The study study establisles the existence of three stages (subcritical,near-critical and supercritical stages)of polymerization,dependenting upon the ratio of association and dissociation rates of f polymers.The present paper concentrates on the analysis of tile subcritical stage.In the sibcritical.stages we show that tile size of the largest length of polymers of stize N is of the order.log N as N →+∞.
基金supported by the National Natural Science Foundation of China(Grants No.41330632,41628202,and 11572112)
文摘Management of groundwater resources and remediation of groundwater pollution require reliable quantification of contaminant dynamics in natural aquifers, which can involve complex chemical dynamics and challenge traditional modeling approaches. The kinetics of chemical reactions in groundwater are well known to be controlled by medium heterogeneity and reactant mixing, motivating the development of particle-based Lagrangian approaches. Previous Lagrangian solvers have been limited to fundamental bimolecular reactions in typically one-dimensional porous media. In contrast to other existing studies, this study developed a fully Lagrangian framework, which was used to simulate diffusion-controlled, multi-step reactions in one-, two-, and three-dimensional porous media. The interaction radius of a reactant molecule, which controls the probability of reaction, was derived by the agent-based approach for both irreversible and reversible reactions. A flexible particle tracking scheme was then developed to build trajectories for particles undergoing mixing-limited, multi-step reactions. The simulated particle dynamics were checked against the kinetics for diffusion-controlled reactions and thermodynamic wellmixed reactions in one-and two-dimensional domains. Applicability of the novel simulator was further tested by(1) simulating precipitation of calcium carbonate minerals in a two-dimensional medium, and(2) quantifying multi-step chemical reactions observed in the laboratory. The flexibility of the Lagrangian simulator allows further refinement to capture complex transport affecting chemical mixing and hence reactions.
基金supported by National High-Tech R&D Program(863 Program),China(No.2013AA102402)
文摘With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of elements are in the samples but are also eager to accomplish quantitative detection with LIBS. There are several means to improve the limit of detection and stability, which are important to quantitative detection, especially of trace elements, increasing the laser energy and the resolution of spectrometer, using dual pulse setup, vacuuming the ablation environment etc. All of these methods are about to update the hardware system, which is effective but expensive. So we establish the following spectrum data processing methods to improve the trace elements analysis in this paper： spectrum sifting, noise filtering, and peak fitting. There are small algorithms in these three method groups, which we will introduce in detail. Finally, we discuss how these methods affect the results of trace elements detection in an experiment to analyze the lead content in Chinese cabbage.
基金Supported by the National Natural Science Foundation of China (10601047)
文摘This paper gives a characterization of a Hunt process path by the first exit left limit distribution. It is also showed that if the first exit left limit distribution leaving any ball from the center is a uniform distribution on the sphere, then the Levy Processes are a scaled Brownian motion.
基金National Natural Science Foundations of China(Nos.61174040,61104178)Shanghai Commission of Science and Technology,China(No.12JC1403400)the Fundamental Research Funds for the Central Universities,China
文摘The flow shop scheduling problem with limited buffers( LBFSP) widely exists in manufacturing systems. A hybrid discrete harmony search algorithm is proposed for the problem to minimize total flow time. The algorithm presents a novel discrete improvisation and a differential evolution scheme with the jobpermutation-based representation. Moreover,the discrete harmony search is hybridized with the problem-dependent local search based on insert neighborhood to balance the global exploration and local exploitation. In addition, an orthogonal experiment design is employed to provide a receipt for turning the adjustable parameters of the algorithm. Comparisons based on the Taillard benchmarks indicate the superiority of the proposed algorithm in terms of effectiveness and efficiency.
文摘It is demonstrated that “survival of the fittest” approach suffers fundamental flaw planted in its very goal: reaching a uniform state starting from a minor random event. Simple considerations prove that a generic property of any such state is its global instability. That is why a new approach to the evolution is put forward. It conjectures equilibrium for systems put in an ever-changing environment. The importance of this issue lies in the view that an ever-changing environment is much closer to the natural environment where the biological species live in. The major goal of the present paper is to demonstrate that a specific form of dynamical equilibrium among certain mutations is established in each and every stable in a long-run system. Major result of our considerations is that neither mutation nor either kind dominates forever because a temporary dynamical equilibrium is replaced with another one in the time course. It will be demonstrated that the evolution of those pieces of equilibrium is causal, yet not predetermined process.
基金supported by the National Natural Science Foundation of China(60902045)the National High-Tech Research and Developmeent Program of China(863 Program)(2011AA01A105)
文摘In order to meet the demands for high transmission rates and high service quality in broadband wireless communication systems, orthogonal frequency division multiplexing （OFDM） has been adopted in some standards. However, the inter-block interference （IBI） and inter-carrier interference （ICI） in an OFDM system affect the performance. To mitigate IBI and ICI, some pre-processing approaches have been proposed based on full channel state information （CSI）, which improved the system performance. A pre-processing filter based on partial CSI at the transmitter is designed and investigated. The filter coefficient is given by the optimization processing, the symbol error rate （SER） is tested, and the computation complexity of the proposed scheme is analyzed. Computer simulation results show that the proposed pre-processing filter can effectively mitigate IBI and ICI and the performance can be improved. Compared with pre-processing approaches at the transmitter based on full CSI, the proposed scheme has high spectral efficiency, limited CSI feedback and low computation complexity.
文摘Suppose that E and F are separable Banach spaces, X and Y are independent symmetric E and F-valued random vectors respectively. This paper is devoted to the study of the central limit theorem for X Y in the injective and projective tensor product spaces E F and E F. Special attention is paid to l2 l2. In addition, two counter-examples are given.
文摘The aim of this study was to establish a control system for saccharification process using quality control charts. To achieve this goal, temperature, pH and brix were measured at 12 minutes intervals for 15 consecutive batches which took 2 hours each. The time variations for three process parameters were assessed to establish a good understanding of the saccharification process. The temperature varied between 58℃ and 62℃ while the pH decreased slowly due to oxidation, values of which varied between 5.7 and 5.0. Brix values increased linearly with time. The initial and final values of the three parameters varied from one batch to another. Of the three parameters, brix was not well represented on the quality control charts due to wide difference between initial and final values during saccharification. The final brix values varied between batches, from 10.6% to 11.6%. The control charts used in this study were X-bar and Range charts. The rules for interpreting control charts were implemented for both X-bar and R charts, results of which showed that the process was out of control, although some rules were not violated due to little number of batches studied. The values of for temperature and pH data (2.27℃ and 0.35, respectively) were lower compared to brix data (11.2%). The corresponding values of span between control limits, SP<sub>x</sub> and SP<sub>R</sub> for temperature and pH were also comparatively lower than those established from brix data. Due to larger values of for brix measurements, the corresponding control charts for brix were insensitive in identifying out-of-control points during saccharification process.
