Using traditional particle tracking velocimetry based on optical flow for measuring areas with large velocity gradient changes may cause oversmoothing,resulting in significant measurement errors.To address this proble...Using traditional particle tracking velocimetry based on optical flow for measuring areas with large velocity gradient changes may cause oversmoothing,resulting in significant measurement errors.To address this problem,the traditional particle tracking velocimetry method based on an optical flow was improved.The level set segmentation algorithm was used to obtain the boundary contour of the region with large velocity gradient changes,and the non-uniform flow field was divided into regions according to the boundary contour to obtain sub-regions with uniform velocity distribution.The particle tracking velocimetry method based on optical flow was used to measure the granular flow velocity in each sub-region,thus avoiding the problem of granular flow distribution.The simulation results show that the measurement accuracy of this method is approximately 10%higher than that of traditional methods.The method was applied to a velocity measurement experiment on dense granular flow in silos,and the velocity distribution of the granular flow was obtained,verifying the practicality of the method in granular flow fields.展开更多
Level Set methods are robust and efficient numerical tools for resolving curve evolution in image segmentation. This paper proposes a new image segmentation algorithm based on Mumford-Shah module. The method is used t...Level Set methods are robust and efficient numerical tools for resolving curve evolution in image segmentation. This paper proposes a new image segmentation algorithm based on Mumford-Shah module. The method is used to CT images and the experiment results demonstrate its efficiency and veracity.展开更多
Laser triangulation theory was used to develop a novel contact-free method for measuring the coal level in a silo under harsh environmental conditions found in coal mines, such as the presence of dense dust, high humi...Laser triangulation theory was used to develop a novel contact-free method for measuring the coal level in a silo under harsh environmental conditions found in coal mines, such as the presence of dense dust, high humidity, and low illumination. A laser source and a camera were mounted at the top of the silo. The laser spot projected into the silo was imaged by the camera. The pinhole imaging principle allows the level to be found from the lateral shift of the spot image on the sensor. A pre-calibrated look-up table of the coal depth versus spot position was used to obtain the depth. The measurement accuracy depends on the step size used during pre-calibration. The actual application of a device designed according to these principles shows that it is easy to implement. The detection of the coal level in a silo at the low illumination level found in coal mines is demonstrated.展开更多
Background and objectives Skin defects are one of the primary problems that occur in post-harvest grading and processing of loquats.Skin defects lead to the loquat being easily destroyed during transportation and stor...Background and objectives Skin defects are one of the primary problems that occur in post-harvest grading and processing of loquats.Skin defects lead to the loquat being easily destroyed during transportation and storage,which causes the risk of other loquats being infected,affecting the selling price.Materials and Methods In this paper,a method combining band radio image with an improved three-phase level set segmentation algorithm(ITPLSSM)is proposed to achieve high accuracy,rapid,and non-destructive detection of skin defects of loquats.Principal component analysis(PCA)was used to find the characteristic wavelength and PC images to distinguish four types of skin defects.The best band ratio image based on characteristic wavelength was determined.Results The band ratio image(Q782/944)based on PC2 image is the best segmented image.Based on pseudo-color image enhancement,morphological processing,and local clustering criteria,the band ratio image(Q782/944)has better contrast between defective and normal areas in loquat.Finally,the ITPLSSM was used to segment the processing band ratio image(Q782/944),with an accuracy of 95.28%.Conclusions The proposed ITPLSSM method is effective in distinguishing four types of skin defects.Meanwhile,it also effectively segments images with intensity inhomogeneities.展开更多
The comprehensive utilization of wood is the main goal of log cutting,but knot defects increase the diffi-culty of rationally optimizing cutting.Due to the lack of real shape data of knot defects in logs,it is diffi c...The comprehensive utilization of wood is the main goal of log cutting,but knot defects increase the diffi-culty of rationally optimizing cutting.Due to the lack of real shape data of knot defects in logs,it is diffi cult for detection methods to establish a correlation between signal and defect morphology.An image-processing method is proposed for knot inversion based on distance regularized level set segmentation(DRLSE)and spatial vertex clustering,and with the inversion of the defects existing relative board position in the log,an inversion model of the knot defect is established.First,the defect edges of the top and bottom images of the boards are extracted by DRLSE and ellipse fi tting,and the major axes of the ellipses made coplanar by angle correction;second,the coordinate points of the top and bottom ellipse edges are extracted to form a spatial straight line;third,to solve the intersection dispersion of spatial straight lines and the major axis plane,K-medoids clustering is used to locate the vertex.Finally,with the vertex and the large ellipse,a 3D cone model is constructed which can be used to invert the shape of knots in the board.The experiment was conducted on ten defective larch boards,and the experimental results showed that this method can accurately invert the shapes of defects in solid wood boards with the advantages of low cost and easy operation.展开更多
Improved picture quality is critical to the effectiveness of object recog-nition and tracking.The consistency of those photos is impacted by night-video systems because the contrast between high-profile items and diffe...Improved picture quality is critical to the effectiveness of object recog-nition and tracking.The consistency of those photos is impacted by night-video systems because the contrast between high-profile items and different atmospheric conditions,such as mist,fog,dust etc.The pictures then shift in intensity,colour,polarity and consistency.A general challenge for computer vision analyses lies in the horrid appearance of night images in arbitrary illumination and ambient envir-onments.In recent years,target recognition techniques focused on deep learning and machine learning have become standard algorithms for object detection with the exponential growth of computer performance capabilities.However,the iden-tification of objects in the night world also poses further problems because of the distorted backdrop and dim light.The Correlation aware LSTM based YOLO(You Look Only Once)classifier method for exact object recognition and deter-mining its properties under night vision was a major inspiration for this work.In order to create virtual target sets similar to daily environments,we employ night images as inputs;and to obtain high enhanced image using histogram based enhancement and iterative wienerfilter for removing the noise in the image.The process of the feature extraction and feature selection was done for electing the potential features using the Adaptive internal linear embedding(AILE)and uplift linear discriminant analysis(ULDA).The region of interest mask can be segmen-ted using the Recurrent-Phase Level set Segmentation.Finally,we use deep con-volution feature fusion and region of interest pooling to integrate the presently extremely sophisticated quicker Long short term memory based(LSTM)with YOLO method for object tracking system.A range of experimentalfindings demonstrate that our technique achieves high average accuracy with a precision of 99.7%for object detection of SSAN datasets that is considerably more than that of the other standard object detection mechanism.Our approach may therefore satisfy the true demands of night scene target detection applications.We very much believe that our method will help future research.展开更多
Purpose-One of the challenging issues in computer vision and pattern recognition is face image recognition.Several studies based on face recognition were introduced in the past decades,but it has few classification is...Purpose-One of the challenging issues in computer vision and pattern recognition is face image recognition.Several studies based on face recognition were introduced in the past decades,but it has few classification issues in terms of poor performances.Hence,the authors proposed a novel model for face recognition.Design/methodology/approach-The proposed method consists of four major sections such as data acquisition,segmentation,feature extraction and recognition.Initially,the images are transferred into grayscale images,and they pose issues that are eliminated by resizing the input images.The contrast limited adaptive histogram equalization(CLAHE)utilizes the image preprocessing step,thereby eliminating unwanted noise and improving the image contrast level.Second,the active contour and level set-based segmentation(ALS)with neural network(NN)or ALS with NN algorithm is used for facial image segmentation.Next,the four major kinds of feature descriptors are dominant color structure descriptors,scale-invariant feature transform descriptors,improved center-symmetric local binary patterns(ICSLBP)and histograms of gradients(HOG)are based on clour and texture features.Finally,the support vector machine(SVM)with modified random forest(MRF)model for facial image recognition.Findings-Experimentally,the proposed method performance is evaluated using different kinds of evaluation criterions such as accuracy,similarity index,dice similarity coefficient,precision,recall and F-score results.However,the proposed method offers superior recognition performances than other state-of-art methods.Further face recognition was analyzed with the metrics such as accuracy,precision,recall and F-score and attained 99.2,96,98 and 96%,respectively.Originality/value-The good facial recognition method is proposed in this research work to overcome threat to privacy,violation of rights and provide better security of data.展开更多
文摘Using traditional particle tracking velocimetry based on optical flow for measuring areas with large velocity gradient changes may cause oversmoothing,resulting in significant measurement errors.To address this problem,the traditional particle tracking velocimetry method based on an optical flow was improved.The level set segmentation algorithm was used to obtain the boundary contour of the region with large velocity gradient changes,and the non-uniform flow field was divided into regions according to the boundary contour to obtain sub-regions with uniform velocity distribution.The particle tracking velocimetry method based on optical flow was used to measure the granular flow velocity in each sub-region,thus avoiding the problem of granular flow distribution.The simulation results show that the measurement accuracy of this method is approximately 10%higher than that of traditional methods.The method was applied to a velocity measurement experiment on dense granular flow in silos,and the velocity distribution of the granular flow was obtained,verifying the practicality of the method in granular flow fields.
文摘Level Set methods are robust and efficient numerical tools for resolving curve evolution in image segmentation. This paper proposes a new image segmentation algorithm based on Mumford-Shah module. The method is used to CT images and the experiment results demonstrate its efficiency and veracity.
基金supported by the National Natural Science Foun-dation of China (No. 51074169)
文摘Laser triangulation theory was used to develop a novel contact-free method for measuring the coal level in a silo under harsh environmental conditions found in coal mines, such as the presence of dense dust, high humidity, and low illumination. A laser source and a camera were mounted at the top of the silo. The laser spot projected into the silo was imaged by the camera. The pinhole imaging principle allows the level to be found from the lateral shift of the spot image on the sensor. A pre-calibrated look-up table of the coal depth versus spot position was used to obtain the depth. The measurement accuracy depends on the step size used during pre-calibration. The actual application of a device designed according to these principles shows that it is easy to implement. The detection of the coal level in a silo at the low illumination level found in coal mines is demonstrated.
基金the financial support provided by the National Natural Science Foundation of China(No.12103019)National Science and Technology Award Backup Project Cultivation Plan(No.20192AEI91007),China。
文摘Background and objectives Skin defects are one of the primary problems that occur in post-harvest grading and processing of loquats.Skin defects lead to the loquat being easily destroyed during transportation and storage,which causes the risk of other loquats being infected,affecting the selling price.Materials and Methods In this paper,a method combining band radio image with an improved three-phase level set segmentation algorithm(ITPLSSM)is proposed to achieve high accuracy,rapid,and non-destructive detection of skin defects of loquats.Principal component analysis(PCA)was used to find the characteristic wavelength and PC images to distinguish four types of skin defects.The best band ratio image based on characteristic wavelength was determined.Results The band ratio image(Q782/944)based on PC2 image is the best segmented image.Based on pseudo-color image enhancement,morphological processing,and local clustering criteria,the band ratio image(Q782/944)has better contrast between defective and normal areas in loquat.Finally,the ITPLSSM was used to segment the processing band ratio image(Q782/944),with an accuracy of 95.28%.Conclusions The proposed ITPLSSM method is effective in distinguishing four types of skin defects.Meanwhile,it also effectively segments images with intensity inhomogeneities.
基金supported fi nancially by the China State Forestry Administration“948”projects(2015-4-52),and Hei-longjiang Natural Science Foundation(C2017005).
文摘The comprehensive utilization of wood is the main goal of log cutting,but knot defects increase the diffi-culty of rationally optimizing cutting.Due to the lack of real shape data of knot defects in logs,it is diffi cult for detection methods to establish a correlation between signal and defect morphology.An image-processing method is proposed for knot inversion based on distance regularized level set segmentation(DRLSE)and spatial vertex clustering,and with the inversion of the defects existing relative board position in the log,an inversion model of the knot defect is established.First,the defect edges of the top and bottom images of the boards are extracted by DRLSE and ellipse fi tting,and the major axes of the ellipses made coplanar by angle correction;second,the coordinate points of the top and bottom ellipse edges are extracted to form a spatial straight line;third,to solve the intersection dispersion of spatial straight lines and the major axis plane,K-medoids clustering is used to locate the vertex.Finally,with the vertex and the large ellipse,a 3D cone model is constructed which can be used to invert the shape of knots in the board.The experiment was conducted on ten defective larch boards,and the experimental results showed that this method can accurately invert the shapes of defects in solid wood boards with the advantages of low cost and easy operation.
文摘Improved picture quality is critical to the effectiveness of object recog-nition and tracking.The consistency of those photos is impacted by night-video systems because the contrast between high-profile items and different atmospheric conditions,such as mist,fog,dust etc.The pictures then shift in intensity,colour,polarity and consistency.A general challenge for computer vision analyses lies in the horrid appearance of night images in arbitrary illumination and ambient envir-onments.In recent years,target recognition techniques focused on deep learning and machine learning have become standard algorithms for object detection with the exponential growth of computer performance capabilities.However,the iden-tification of objects in the night world also poses further problems because of the distorted backdrop and dim light.The Correlation aware LSTM based YOLO(You Look Only Once)classifier method for exact object recognition and deter-mining its properties under night vision was a major inspiration for this work.In order to create virtual target sets similar to daily environments,we employ night images as inputs;and to obtain high enhanced image using histogram based enhancement and iterative wienerfilter for removing the noise in the image.The process of the feature extraction and feature selection was done for electing the potential features using the Adaptive internal linear embedding(AILE)and uplift linear discriminant analysis(ULDA).The region of interest mask can be segmen-ted using the Recurrent-Phase Level set Segmentation.Finally,we use deep con-volution feature fusion and region of interest pooling to integrate the presently extremely sophisticated quicker Long short term memory based(LSTM)with YOLO method for object tracking system.A range of experimentalfindings demonstrate that our technique achieves high average accuracy with a precision of 99.7%for object detection of SSAN datasets that is considerably more than that of the other standard object detection mechanism.Our approach may therefore satisfy the true demands of night scene target detection applications.We very much believe that our method will help future research.
文摘Purpose-One of the challenging issues in computer vision and pattern recognition is face image recognition.Several studies based on face recognition were introduced in the past decades,but it has few classification issues in terms of poor performances.Hence,the authors proposed a novel model for face recognition.Design/methodology/approach-The proposed method consists of four major sections such as data acquisition,segmentation,feature extraction and recognition.Initially,the images are transferred into grayscale images,and they pose issues that are eliminated by resizing the input images.The contrast limited adaptive histogram equalization(CLAHE)utilizes the image preprocessing step,thereby eliminating unwanted noise and improving the image contrast level.Second,the active contour and level set-based segmentation(ALS)with neural network(NN)or ALS with NN algorithm is used for facial image segmentation.Next,the four major kinds of feature descriptors are dominant color structure descriptors,scale-invariant feature transform descriptors,improved center-symmetric local binary patterns(ICSLBP)and histograms of gradients(HOG)are based on clour and texture features.Finally,the support vector machine(SVM)with modified random forest(MRF)model for facial image recognition.Findings-Experimentally,the proposed method performance is evaluated using different kinds of evaluation criterions such as accuracy,similarity index,dice similarity coefficient,precision,recall and F-score results.However,the proposed method offers superior recognition performances than other state-of-art methods.Further face recognition was analyzed with the metrics such as accuracy,precision,recall and F-score and attained 99.2,96,98 and 96%,respectively.Originality/value-The good facial recognition method is proposed in this research work to overcome threat to privacy,violation of rights and provide better security of data.
