A two-dimensional large eddy simulation numerical model is proposed to study the transient vortex flow and pressure oscillation of a large-aspect-ratio solid rocket motor.The numerical model is validated through exper...A two-dimensional large eddy simulation numerical model is proposed to study the transient vortex flow and pressure oscillation of a large-aspect-ratio solid rocket motor.The numerical model is validated through experimental data,finite element analysis and cumulative error analysis.The numerical simulations are executed to obtain the characteristics of the vortex-acoustic and pressure oscillation.The results show that the burning surface regression decreases the motor aspect ratio,increasing the corresponding natural frequency from 260 Hz to 293 Hz.The pressure oscillation phenomenon is formed due to the vortex-acoustic coupling.Decreasing the corner vortex shedding intensity shows negative effects on the dimensionless amplitude of the pressure oscillation.The head cavity without the injection can decrease the vortex-acoustic coupling level at the acoustic pressure antinode.The modified motor with head cavity can obtain a lower dimensionless oscillating pressure amplitude 0.00149 in comparison with 0.00895 of the original motor.The aspect ratio and volume of the head cavity without the injection have great effects on the pressure oscillation suppression,particularly at the low aspect ratio or large volume.The reason is that the mass in the region around the acoustic pressure antinode is extracted centrally,reducing the energy contribution to the acoustic system.With the volume increasing,the acoustic energy capacity increases.展开更多
A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a n...A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.展开更多
To adapt to the change of aquaculture workshop site,optimize the shape of aquaculture tanks and improve the utilization rate of breeding space,it is necessary to determine the appropriate length width ratio parameters...To adapt to the change of aquaculture workshop site,optimize the shape of aquaculture tanks and improve the utilization rate of breeding space,it is necessary to determine the appropriate length width ratio parameters of aquaculture tanks.In this paper,computational fluid dynamics(CFD)technology is adopted to study the flow field performance of aquaculture tanks with different L/B ratios(L:the length;B:the width,of aquaculture tank)and different jet direction conditions(lengthways jet and widthways jet).A three-dimensional numerical calculation model of turbulence in rounded rectangle aquaculture tanks in dual-diagonal-inlet layout was established.Jet directions are arranged lengthways and widthways,and the water flow velocity,resistance coefficient change,vorticity,etc.are analyzed under two working conditions.Results show that the flow field performance in aquaculture tank decreases with the increase of the L/B ratio.The flow field performed well when L/B was 1.0-1.3,sharply dropped at 1.4-1.6,and poor at 1.7-1.9.The results provided a theoretical basis for the design and optimization in flow field performance of the industrialized circulating aquaculture tanks.展开更多
To reduce the shielding effect of hardened layers on electrical resistivity tomography,a ratio method based on the distortion correction principle and the isolation coefficient is proposed.The effects of the resistivi...To reduce the shielding effect of hardened layers on electrical resistivity tomography,a ratio method based on the distortion correction principle and the isolation coefficient is proposed.The effects of the resistivity and thickness of hardened concrete layers on the detection of target objects are explored.Both numerical simulations and indoor tank tests indicate that when the ratio method is employed to correct the original collected data,the maximum allowable error for the isolation coefficient should not exceed 1%.Notably,when the ratio of hardened layer thickness to electrode spacing does not exceed 1,correction through this method significantly enhances the recognition capability of target objects.However,when the hardened layer thickness is greater than the electrode spacing by a factor of 2 or more,the ratio method cannot achieve satisfactory results.The case study of flood control engineering detection in the Zhangxi section of the Huangpen River in Dongzhi County demonstrates that the detection effect after correction by the ratio method is comparable to that for the adjacent unhardened pavement,and the influence of the hardened layer is obviously weakened,resulting in more reliable results.展开更多
Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.Howev...Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.However,the widened hydraulic excitation frequency may satisfy the blade resonance due to the time variation in the velocity and angle of attack of the ocean current,even resulting in blade fatigue and destructively interfering with grid stability.A key parameter that determines the resonance amplitude of the blade is the hydrodynamic damping ratio(HDR).However,HDR is difficult to obtain due to the complex fluid-structure interaction(FSI).Therefore,a literature review was conducted on the hydrodynamic damping characteristics of blade-like structures.The experimental and simulation methods used to identify and obtain the HDR quantitatively were described,placing emphasis on the experimental processes and simulation setups.Moreover,the accuracy and efficiency of different simulation methods were compared,and the modal work approach was recommended.The effects of key typical parameters,including flow velocity,angle of attack,gap,rotational speed,and cavitation,on the HDR were then summarized,and the suggestions on operating conditions were presented from the perspective of increasing the HDR.Subsequently,considering multiple flow parameters,several theoretical derivations and semi-empirical prediction formulas for HDR were introduced,and the accuracy and application were discussed.Based on the shortcomings of the existing research,the direction of future research was finally determined.The current work offers a clear understanding of the HDR of blade-like structures,which could improve the evaluation accuracy of flow-induced vibration in the design stage.展开更多
The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficien...The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.展开更多
Accurate determination of rockhead is crucial for underground construction.Traditionally,borehole data are mainly used for this purpose.However,borehole drilling is costly,time-consuming,and sparsely distributed.Non-i...Accurate determination of rockhead is crucial for underground construction.Traditionally,borehole data are mainly used for this purpose.However,borehole drilling is costly,time-consuming,and sparsely distributed.Non-invasive geophysical methods,particularly those using passive seismic surface waves,have emerged as viable alternatives for geological profiling and rockhead detection.This study proposes three interpretation methods for rockhead determination using passive seismic surface wave data from Microtremor Array Measurement(MAM)and Horizontal-to-Vertical Spectral Ratio(HVSR)tests.These are:(1)the Wavelength-Normalized phase velocity(WN)method in which a nonlinear relationship between rockhead depth and wavelength is established;(2)the Statistically Determined-shear wave velocity(SD-V_(s))method in which the representative V_(s) value for rockhead is automatically determined using a statistical method;and(3)the empirical HVSR method in which the rockhead is determined by interpreting resonant frequencies using a reliably calibrated empirical equation.These methods were implemented to determine rockhead depths at 28 locations across two distinct geological formations in Singapore,and the results were evaluated using borehole data.The WN method can determine rockhead depths accurately and reliably with minimal absolute errors(average RMSE=3.11 m),demonstrating robust performance across both geological formations.Its advantage lies in interpreting dispersion curves alone,without the need for the inversion process.The SD-V_(s) method is practical in engineering practice owing to its simplicity.The empirical HVSR method reasonably determines rockhead depths with moderate accuracy,benefiting from a reliably calibrated empirical equation.展开更多
The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurren...The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurrent flow in annulus is carried out under different working conditions to reveal how the wellbore inclination angle,liquid phase property and countercurrent liquid velocity affect the bubble deformation and bubble migration trajectory/velocity,and to establish a bubble migration velocity prediction model.The bubbles in the countercurrent flow mainly migrate in two modes:free rising of isolated bubbles,and interactive rising of multiple bubbles.The bubbles migrate by an S-shaped trajectory in the countercurrent flow.With the increase of countercurrent liquid velocity,the lateral oscillation of bubbles is intensified.The increases of wellbore inclination angle,liquid density and liquid viscosity make the bubble migration trajectory gradually to be linear.The bubble is generally ellipsoidal during its rising.The wellbore inclination angle has little effect on the degree of bubble deformation.The bubbles are ellipsoidal during rising,with little influence of wellbore inclination angle on bubble deformation.With the increase of liquid viscosity and density,the aspect ratio of the bubble decreases.As the wellbore inclination angle increases,the bubble migration velocity gradually decreases.As the liquid viscosity increases,the bubble migration velocity decreases.As the liquid density increases,the bubble migration velocity increases slightly.The established bubble migration velocity prediction model yields errors within±15%,and demonstrates broad applicability across a wide range of operating conditions.展开更多
The gravitational wave background(GWB) produced by extreme-mass-ratio inspirals(EMRIs) serves as a powerful tool for probing the astrophysical and dynamical processes in galactic centers. EMRI systems are a primary ta...The gravitational wave background(GWB) produced by extreme-mass-ratio inspirals(EMRIs) serves as a powerful tool for probing the astrophysical and dynamical processes in galactic centers. EMRI systems are a primary target for the space-based detector laser interferometer space antenna due to their long-lived signals and high signal-to-noise ratios. This study explores the statistical properties of the GWB from EMRI, focusing on the calculation methods for the GWB, the astrophysical distribution of EMRI sources, and the influence of key parameters, including the spin of supermassive black holes(SMBHs) and the masses of compact objects(COs). By analyzing these factors, we determine the distribution range of the characteristic strain of the GWB from EMRIs. We find that the final eccentricity distributions appear to have negligible effect on the intensity of the GWB due to rapid circularization before they become detectable and the spin of the SMBH enhances the gravitational wave characteristic strain by approximately 1% compared to cases without spin effects. The masses of COs can also significantly affect the characteristic strain of the GWB from EMRIs, with black hole as CO producing a gravitational wave signal intensity that is approximately one order of magnitude higher compared to cases where neutron star or white dwarf are the COs.展开更多
The quality factor Q, which reflects the energy attenuation of seismic waves in subsurface media, is a diagnostic tool for hydrocarbon detection and reservoir characterization. In this paper, we propose a new Q extrac...The quality factor Q, which reflects the energy attenuation of seismic waves in subsurface media, is a diagnostic tool for hydrocarbon detection and reservoir characterization. In this paper, we propose a new Q extraction method based on the energy ratio before and after the wavelet attenuation, named the energy-ratio method（ERM）. The proposed method uses multipoint signal data in the time domain to estimate the wavelet energy without invoking the source wavelet spectrum, which is necessary in conventional Q extraction methods, and is applicable to any source wavelet spectrum; however, it requires high-precision seismic data. Forward zero-offset VSP modeling suggests that the ERM can be used for reliable Q inversion after nonintrinsic attenuation（geometric dispersion, refl ection, and transmission loss） compensation. The application to real zero-offset VSP data shows that the Q values extracted by the ERM and spectral ratio methods are identical, which proves the reliability of the new method.展开更多
The bubbles rise up and burst at the free surface is a complex two-phase process.A free energy lattice Boltzmann method(LBM)model is adopted in this paper to study this phenomenon.The interface capturing technique[Zhe...The bubbles rise up and burst at the free surface is a complex two-phase process.A free energy lattice Boltzmann method(LBM)model is adopted in this paper to study this phenomenon.The interface capturing technique[Zheng et al.,2006]is used to deal with the high density ratio problem.The Laplace law and the air-water interface capturing ability are validated for the multiphase model.The interaction between the single bubble or multiple bubbles and the free surface are studied by the multiphase model.The force acting on the bubble and the evolution of the free surface is studied.Meanwhile,effect of the initial distance between two adjacent bubbles on interaction effects of multiple bubbles is investigated as well.展开更多
The attenuation factor or quality factor(Q-factor or Q) has been used to measure the energy attenuation of seismic waves propagating in underground media. Many methods are used to estimate the Q-factor. We propose a m...The attenuation factor or quality factor(Q-factor or Q) has been used to measure the energy attenuation of seismic waves propagating in underground media. Many methods are used to estimate the Q-factor. We propose a method to calculate the Q-factor based on the prestack Q-factor inversion and the generalized S-transform. The proposed method specifies a standard primary wavelet and calculates the cumulative Q-factors; then, it finds the interlaminar Q-factors using the relation between Q and offset(QVO) and the Dix formula. The proposed method is alternative to methods that calculate interlaminar Q-factors after horizon picking. Because the frequency spectrum of each horizon can be extracted continuously on a 2D time–frequency spectrum, the method is called the continuous spectral ratio slope(CSRS) method. Compared with the other Q-inversion methods, the method offers nearly effortless computations and stability, and has mathematical and physical significance. We use numerical modeling to verify the feasibility of the method and apply it to real data from an oilfield in Ahdeb, Iraq. The results suggest that the resolution and spatial stability of the Q-profile are optimal and contain abundant interlaminar information that is extremely helpful in making lithology and fluid predictions.展开更多
Ferrotitanium is used as a deoxidizer and alloying agent during steelmaking process,which has a high demand for sulfur control.Sulfur was introduced from raw materials in the process of producing ferrotitanium by ther...Ferrotitanium is used as a deoxidizer and alloying agent during steelmaking process,which has a high demand for sulfur control.Sulfur was introduced from raw materials in the process of producing ferrotitanium by thermite method,where CaO was used as fluxing agent.At the same time,CaO has a great desulfurization capability.Effects of CaO addition on the distribution of sulfur in high titanium ferroalloy prepared by thermite method were studied in this work.The equilibrium diagram of Ti-AlFe-S system was calculated by FactSage 6.4 software package with FactPS and FTmisc database.The alloy and slag samples were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),inductively coupled plasma atomic emission spectrometer(ICP-AES),X-ray fluorescence(XRF)and high-frequency infrared ray carbon sulfur analyzer.The result indicates that the sulfur in the alloy firstly exists in the form of liquid FeS,thereafter TiS(s)and eventually Ti2 S(s)during cooling.The sulfur is mainly distributed in the alloy,and only a small amount of sulfur remains in the slag.Moreover,it is noted that the sulfur in the alloy does not distribute homogeneously,and it exists in the form of solid solution phase,(Ti,Al,Fe)S.S content in the slag,the sulfur capacity of the slag and the sulfur distribution ratio(LS)all increase with the increment of CaO addition,while S content in alloys decreases.展开更多
An improved design method of pervious concrete was proposed to lower the deviation between the designed and actual porosity and maintain both mechanical property and permeability of pervious concrete. The improved des...An improved design method of pervious concrete was proposed to lower the deviation between the designed and actual porosity and maintain both mechanical property and permeability of pervious concrete. The improved design method is mainly based on the optimal volume ratio of paste to aggregate(VRPA), which was determined by testing the average thickness of cement paste coating aggregate. The performances of pervious concrete designed by the traditional method and the improved one were compared. The results show that with the increase of designed porosity, the reduction of compressive strength and flexural strength of pervious concrete designed by the improved method is significantly smaller than those designed by the traditional one. The maximum deviation between the designed and actual porosity of the pervious concrete by the improved method is only 1.54%, which is far less than 8.7% obtained by the traditional one. Micro-structural analysis shows that the porous distribution of pervious concrete designed by improved method exhibits better uniformity.展开更多
Rubber isolation is the most mature control technology in practical application, and is widely used by short rigid buildings. However, many high isolation buildings have been built around the world in recent years, wh...Rubber isolation is the most mature control technology in practical application, and is widely used by short rigid buildings. However, many high isolation buildings have been built around the world in recent years, which do not follow the existing criterions and codes. Many researchers began to research the special problems caused by larger height-width ratio isolation structures. The overturning effect of high height-width ratio structures with rubber bearing is firstly studied. Considering the main factors, such as the height-width ratio of structures, type of site, the designed basic acceleration of ground motion and the decouple factor in horizon, computing experiment is defined with the Uniform Design Method, which is also known as designing isolation structure. The forces of the bearing under edge of structures based on the position of the rubber bearing are calculated. The result indicates that the rubber bearings will lose its functionality under very high tension and compressing force of earthquake motion in horizon and vertical, when the height-width ratio is over a certain value. Thus, based on the calculation result of isolation structures defined in the uniform design method, regression analysis is conducted, and also the rubber edge force regression formula are gotten, which has higher correlation and smaller standard deviation. This formula can be used to roughly calculate whether the pull force occurs at the edge of the building. By the edge bearings of isolation structure minimum force formula, the height-width ratio limited value of the isolation structure is deducted when rubber bearing has minimum force of zero.展开更多
An extended compromise ratio method（CRM） based on fuzzy distances is developed to solve fuzzy multi-attribute group decision making problems in which weights of attributes and ratings of alternatives on attributes a...An extended compromise ratio method（CRM） based on fuzzy distances is developed to solve fuzzy multi-attribute group decision making problems in which weights of attributes and ratings of alternatives on attributes are expressed with values of linguistic variables parameterized using triangular fuzzy numbers.A compromise solution is determined by introducing the ranking index based on the concept that the chosen alternative should be as close as possible to the positive ideal solution and as far away from the negative ideal solution as possible simultaneously.This proposed method is compared with other existing methods to show its feasibility and effectiveness and illustrated with an example of the military route selection problem as one of the possible applications.展开更多
Numerical simulations are performed to examine the packing behavior of human red blood cells(RBCs). A combined ?nite-discrete element method(FDEM) is utilized, in which the RBCs are modeled as no-friction and no-adhes...Numerical simulations are performed to examine the packing behavior of human red blood cells(RBCs). A combined ?nite-discrete element method(FDEM) is utilized, in which the RBCs are modeled as no-friction and no-adhesion solid bodies. The packed volume and the void ratio of a large number of randomly packed RBCs are clari?ed,and the effects of the RBC shape, the mesh size, the cell number, and the container size are investigated. The results show that the packed human RBCs with normal shape have a void ratio of 28.45%, which is slightly higher than that of the ?at or thick cells used in this study. Such information is bene?cial to the further understanding on the geometric features of human RBCs and the research on RBC simulations.展开更多
A ratio approach based on the simple ratio test associated with the terms of homotopy series was proposed by the author in the previous publications.It was shown in the latter through various comparative physical mode...A ratio approach based on the simple ratio test associated with the terms of homotopy series was proposed by the author in the previous publications.It was shown in the latter through various comparative physical models that the ratio approach of identifying the range of the convergence control parameter and also an optimal value for it in the homotopy analysis method is a promising alternative to the classically used h-level curves or to the minimizing the residual(squared)error.A mathematical analysis is targeted here to prove the equivalence of both the ratio approach and the traditional residual approach,especially regarding the root-finding problems via the homotopy analysis method.Examples are provided to further justify this.Moreover,it is conjectured that every nonlinear differential equation can be considered as a root-finding problem by plugging a parameter in it from a physical viewpoint.Two examples from the boundary and initial and value problems are provided to verify this assertion.Hence,besides the advantages as deciphered in the previous publications,the feasibility of the ratio approach over the traditional residual approach is made clearer in this paper.展开更多
The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reducti...The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reduction of NOx by NH3.Four different methods,namely pre-impregnation,post-impregnation,coimpregnation,and co-precipitation,were used to synthesize a series of V2 O5-WO3-TiO2-CeO2-ZrO2 catalysts.The catalysts were characterized by XRD,BET,NH3-TPD,XPS,and H2-TPR techniques.Moreover,the activity and anti-K poisoning performance were tested by an NH3-SCR model reaction.The results show that the introduction of Ce^4+and Zr^4+can improve the catalytic performance of V2O5-WO3/TiO2 catalyst,but the impregnation method cannot enhance the anti-K poisoning performance.Ce^4+and Zr^4+introduced by co-precipitation method can effectively improve the tolerance of K,which is mainly due to the incorporation of Ce^4+and Zr^4+into TiO2 lattice to form a uniform TiO2-CeO2-ZrO2 solid solution,resulting in the optimal surface acidity and redox performance,and reducing the decreases caused by Kpoisoning.Furthermore,based on the best introduction method,we further optimized the molar ratio of Ce^4+/Zr^4+,It is found that the catalyst exhibits the best anti-K poisoning performance when the molar ratio of Ce^4+/Zr^4+is 2:1.展开更多
This study aimed to explore the application of surface-enhanced Raman scattering(SERS)in the rapid diagnosis of gastric cancer.The SERS spectra of 68 serum samples from gastric cancer patients and healthy volunteers w...This study aimed to explore the application of surface-enhanced Raman scattering(SERS)in the rapid diagnosis of gastric cancer.The SERS spectra of 68 serum samples from gastric cancer patients and healthy volunteers were acquired.The characteristic ratio method(CRM)and principal component analysis(PCA)were used to differentiate gastric cancer serum from normal serum.Compared with healthy volunteers,the serum SERS intensity of gastric cancer patients was relatively high at 722 cm^(-1),while it was relatively low at 588,644,861,1008,1235,1397,1445 and 1586 cm^(-1).These results indicated that the relative content of nucleic acids in the serum of gastric cancer patients rises while the relative content of amino acids and carbohydrates decreases.In PCA,the sensitivity and specificity of discriminating gastric cancer were 94.1%and 94.1%,respectively,with the accuracy of 94.1%.Based on the intensity ratios of four characteristic peaks at 722,861,1008 and 1397 cm^(-1),CRM presented the diagnostic sensitivity and specificity of 100%and 97.4%,respectively,and the accuracy of 98.5%.Therefore,the three peak intensity ratios of I_(722)/I_(861),I_(722)/I_(1008)and I_(722)/I_(1397)can be considered as biologicalfingerprint information for gastric cancer diagnosis and can rapidly and directly reflect the physiological and pathological changes associated with gastric cancer development.This study provides an important basis and standards for the early diagnosis of gastric cancer.展开更多
基金supported by the Natural Science Foundation of Hunan Province of China(No.2023JJ40672)the Innovation Science Fund Project of National University of Defense Technology,China(No.ZK2023-039)。
文摘A two-dimensional large eddy simulation numerical model is proposed to study the transient vortex flow and pressure oscillation of a large-aspect-ratio solid rocket motor.The numerical model is validated through experimental data,finite element analysis and cumulative error analysis.The numerical simulations are executed to obtain the characteristics of the vortex-acoustic and pressure oscillation.The results show that the burning surface regression decreases the motor aspect ratio,increasing the corresponding natural frequency from 260 Hz to 293 Hz.The pressure oscillation phenomenon is formed due to the vortex-acoustic coupling.Decreasing the corner vortex shedding intensity shows negative effects on the dimensionless amplitude of the pressure oscillation.The head cavity without the injection can decrease the vortex-acoustic coupling level at the acoustic pressure antinode.The modified motor with head cavity can obtain a lower dimensionless oscillating pressure amplitude 0.00149 in comparison with 0.00895 of the original motor.The aspect ratio and volume of the head cavity without the injection have great effects on the pressure oscillation suppression,particularly at the low aspect ratio or large volume.The reason is that the mass in the region around the acoustic pressure antinode is extracted centrally,reducing the energy contribution to the acoustic system.With the volume increasing,the acoustic energy capacity increases.
基金Project(24A0006)supported by the Key Project of Scientific Research Fund of Hunan Provincial Department of Education,ChinaProject(2024JJ5430)supported by the Natural Science Foundation of Hunan Province,ChinaProjects(2024JK2045,2023RC3061)supported by the Science and Technology Innovation Program of Hunan Province,China。
文摘A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.
基金Supported by the National Natural Science Foundation of China(No.31872609)the Innovation Support Program for High-level Talents of Dalian City(No.2019RD12)+1 种基金the Key Research Project of Liaoning Provincial Department of Education in 2022(No.LJKZZ 20220091)the earmarked fund for CARS-49(CARS-49)。
文摘To adapt to the change of aquaculture workshop site,optimize the shape of aquaculture tanks and improve the utilization rate of breeding space,it is necessary to determine the appropriate length width ratio parameters of aquaculture tanks.In this paper,computational fluid dynamics(CFD)technology is adopted to study the flow field performance of aquaculture tanks with different L/B ratios(L:the length;B:the width,of aquaculture tank)and different jet direction conditions(lengthways jet and widthways jet).A three-dimensional numerical calculation model of turbulence in rounded rectangle aquaculture tanks in dual-diagonal-inlet layout was established.Jet directions are arranged lengthways and widthways,and the water flow velocity,resistance coefficient change,vorticity,etc.are analyzed under two working conditions.Results show that the flow field performance in aquaculture tank decreases with the increase of the L/B ratio.The flow field performed well when L/B was 1.0-1.3,sharply dropped at 1.4-1.6,and poor at 1.7-1.9.The results provided a theoretical basis for the design and optimization in flow field performance of the industrialized circulating aquaculture tanks.
基金National Key Research and Development Program of China(No.2021YFC3000103).
文摘To reduce the shielding effect of hardened layers on electrical resistivity tomography,a ratio method based on the distortion correction principle and the isolation coefficient is proposed.The effects of the resistivity and thickness of hardened concrete layers on the detection of target objects are explored.Both numerical simulations and indoor tank tests indicate that when the ratio method is employed to correct the original collected data,the maximum allowable error for the isolation coefficient should not exceed 1%.Notably,when the ratio of hardened layer thickness to electrode spacing does not exceed 1,correction through this method significantly enhances the recognition capability of target objects.However,when the hardened layer thickness is greater than the electrode spacing by a factor of 2 or more,the ratio method cannot achieve satisfactory results.The case study of flood control engineering detection in the Zhangxi section of the Huangpen River in Dongzhi County demonstrates that the detection effect after correction by the ratio method is comparable to that for the adjacent unhardened pavement,and the influence of the hardened layer is obviously weakened,resulting in more reliable results.
基金Supported by the National Natural Science Foundation of China(Nos.52222904 and 52309117)China Postdoctoral Science Foundation(Nos.2022TQ0168 and 2023M731895).
文摘Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.However,the widened hydraulic excitation frequency may satisfy the blade resonance due to the time variation in the velocity and angle of attack of the ocean current,even resulting in blade fatigue and destructively interfering with grid stability.A key parameter that determines the resonance amplitude of the blade is the hydrodynamic damping ratio(HDR).However,HDR is difficult to obtain due to the complex fluid-structure interaction(FSI).Therefore,a literature review was conducted on the hydrodynamic damping characteristics of blade-like structures.The experimental and simulation methods used to identify and obtain the HDR quantitatively were described,placing emphasis on the experimental processes and simulation setups.Moreover,the accuracy and efficiency of different simulation methods were compared,and the modal work approach was recommended.The effects of key typical parameters,including flow velocity,angle of attack,gap,rotational speed,and cavitation,on the HDR were then summarized,and the suggestions on operating conditions were presented from the perspective of increasing the HDR.Subsequently,considering multiple flow parameters,several theoretical derivations and semi-empirical prediction formulas for HDR were introduced,and the accuracy and application were discussed.Based on the shortcomings of the existing research,the direction of future research was finally determined.The current work offers a clear understanding of the HDR of blade-like structures,which could improve the evaluation accuracy of flow-induced vibration in the design stage.
基金the National Natural Science Foundation of China(No.52275378)the National Key Laboratory for Precision Hot Processing of Metals(6142909200208)。
文摘The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.
基金partially supported by the Singapore Ministry of National Development and the National Research Foundation,Prime Minister’s Office,Singapore,under the Land and Liveability National Innovation Challenge(L2 NIC)Research Program(Grant No.L2NICCFP2-2015-1)by the National Research Foundation(NRF)of Singapore,under the Virtual Singapore program(Grant No.NRF2019VSG-GMS-001).
文摘Accurate determination of rockhead is crucial for underground construction.Traditionally,borehole data are mainly used for this purpose.However,borehole drilling is costly,time-consuming,and sparsely distributed.Non-invasive geophysical methods,particularly those using passive seismic surface waves,have emerged as viable alternatives for geological profiling and rockhead detection.This study proposes three interpretation methods for rockhead determination using passive seismic surface wave data from Microtremor Array Measurement(MAM)and Horizontal-to-Vertical Spectral Ratio(HVSR)tests.These are:(1)the Wavelength-Normalized phase velocity(WN)method in which a nonlinear relationship between rockhead depth and wavelength is established;(2)the Statistically Determined-shear wave velocity(SD-V_(s))method in which the representative V_(s) value for rockhead is automatically determined using a statistical method;and(3)the empirical HVSR method in which the rockhead is determined by interpreting resonant frequencies using a reliably calibrated empirical equation.These methods were implemented to determine rockhead depths at 28 locations across two distinct geological formations in Singapore,and the results were evaluated using borehole data.The WN method can determine rockhead depths accurately and reliably with minimal absolute errors(average RMSE=3.11 m),demonstrating robust performance across both geological formations.Its advantage lies in interpreting dispersion curves alone,without the need for the inversion process.The SD-V_(s) method is practical in engineering practice owing to its simplicity.The empirical HVSR method reasonably determines rockhead depths with moderate accuracy,benefiting from a reliably calibrated empirical equation.
基金Supported by the National Natural Science Foundation of China(U21B2069,52274020,52288101,52274022)National Key Research and Development Program of China(2022YFC2806504)。
文摘The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurrent flow in annulus is carried out under different working conditions to reveal how the wellbore inclination angle,liquid phase property and countercurrent liquid velocity affect the bubble deformation and bubble migration trajectory/velocity,and to establish a bubble migration velocity prediction model.The bubbles in the countercurrent flow mainly migrate in two modes:free rising of isolated bubbles,and interactive rising of multiple bubbles.The bubbles migrate by an S-shaped trajectory in the countercurrent flow.With the increase of countercurrent liquid velocity,the lateral oscillation of bubbles is intensified.The increases of wellbore inclination angle,liquid density and liquid viscosity make the bubble migration trajectory gradually to be linear.The bubble is generally ellipsoidal during its rising.The wellbore inclination angle has little effect on the degree of bubble deformation.The bubbles are ellipsoidal during rising,with little influence of wellbore inclination angle on bubble deformation.With the increase of liquid viscosity and density,the aspect ratio of the bubble decreases.As the wellbore inclination angle increases,the bubble migration velocity gradually decreases.As the liquid viscosity increases,the bubble migration velocity decreases.As the liquid density increases,the bubble migration velocity increases slightly.The established bubble migration velocity prediction model yields errors within±15%,and demonstrates broad applicability across a wide range of operating conditions.
基金supported by the National Key R&D Program of China (Grant No. 2020YFC2201400)。
文摘The gravitational wave background(GWB) produced by extreme-mass-ratio inspirals(EMRIs) serves as a powerful tool for probing the astrophysical and dynamical processes in galactic centers. EMRI systems are a primary target for the space-based detector laser interferometer space antenna due to their long-lived signals and high signal-to-noise ratios. This study explores the statistical properties of the GWB from EMRI, focusing on the calculation methods for the GWB, the astrophysical distribution of EMRI sources, and the influence of key parameters, including the spin of supermassive black holes(SMBHs) and the masses of compact objects(COs). By analyzing these factors, we determine the distribution range of the characteristic strain of the GWB from EMRIs. We find that the final eccentricity distributions appear to have negligible effect on the intensity of the GWB due to rapid circularization before they become detectable and the spin of the SMBH enhances the gravitational wave characteristic strain by approximately 1% compared to cases without spin effects. The masses of COs can also significantly affect the characteristic strain of the GWB from EMRIs, with black hole as CO producing a gravitational wave signal intensity that is approximately one order of magnitude higher compared to cases where neutron star or white dwarf are the COs.
基金supported by the Major Project of the Ministry of Science and Technology of China(No.2011ZX05024-001-01)National Nature Science Foundation of China(No.41140033)
文摘The quality factor Q, which reflects the energy attenuation of seismic waves in subsurface media, is a diagnostic tool for hydrocarbon detection and reservoir characterization. In this paper, we propose a new Q extraction method based on the energy ratio before and after the wavelet attenuation, named the energy-ratio method（ERM）. The proposed method uses multipoint signal data in the time domain to estimate the wavelet energy without invoking the source wavelet spectrum, which is necessary in conventional Q extraction methods, and is applicable to any source wavelet spectrum; however, it requires high-precision seismic data. Forward zero-offset VSP modeling suggests that the ERM can be used for reliable Q inversion after nonintrinsic attenuation（geometric dispersion, refl ection, and transmission loss） compensation. The application to real zero-offset VSP data shows that the Q values extracted by the ERM and spectral ratio methods are identical, which proves the reliability of the new method.
基金supported by the National Natural Science Foundation of China (11672081)
文摘The bubbles rise up and burst at the free surface is a complex two-phase process.A free energy lattice Boltzmann method(LBM)model is adopted in this paper to study this phenomenon.The interface capturing technique[Zheng et al.,2006]is used to deal with the high density ratio problem.The Laplace law and the air-water interface capturing ability are validated for the multiphase model.The interaction between the single bubble or multiple bubbles and the free surface are studied by the multiphase model.The force acting on the bubble and the evolution of the free surface is studied.Meanwhile,effect of the initial distance between two adjacent bubbles on interaction effects of multiple bubbles is investigated as well.
基金supported by The National Key Research and Development Program Plane(No.2017YFC0601505)National Natural Science Foundation(No.41672325)Science&Technology Department of Sichuan Province Technology Project(No.2017GZ0393)
文摘The attenuation factor or quality factor(Q-factor or Q) has been used to measure the energy attenuation of seismic waves propagating in underground media. Many methods are used to estimate the Q-factor. We propose a method to calculate the Q-factor based on the prestack Q-factor inversion and the generalized S-transform. The proposed method specifies a standard primary wavelet and calculates the cumulative Q-factors; then, it finds the interlaminar Q-factors using the relation between Q and offset(QVO) and the Dix formula. The proposed method is alternative to methods that calculate interlaminar Q-factors after horizon picking. Because the frequency spectrum of each horizon can be extracted continuously on a 2D time–frequency spectrum, the method is called the continuous spectral ratio slope(CSRS) method. Compared with the other Q-inversion methods, the method offers nearly effortless computations and stability, and has mathematical and physical significance. We use numerical modeling to verify the feasibility of the method and apply it to real data from an oilfield in Ahdeb, Iraq. The results suggest that the resolution and spatial stability of the Q-profile are optimal and contain abundant interlaminar information that is extremely helpful in making lithology and fluid predictions.
基金financially supported by the National Natural Science Foundation of China(Nos.51422403 and51504064)the Fundamental Research Funds for the Central Universities(No.N162505002)the National Basic Research Program of China(No.2013CB632606)
文摘Ferrotitanium is used as a deoxidizer and alloying agent during steelmaking process,which has a high demand for sulfur control.Sulfur was introduced from raw materials in the process of producing ferrotitanium by thermite method,where CaO was used as fluxing agent.At the same time,CaO has a great desulfurization capability.Effects of CaO addition on the distribution of sulfur in high titanium ferroalloy prepared by thermite method were studied in this work.The equilibrium diagram of Ti-AlFe-S system was calculated by FactSage 6.4 software package with FactPS and FTmisc database.The alloy and slag samples were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),inductively coupled plasma atomic emission spectrometer(ICP-AES),X-ray fluorescence(XRF)and high-frequency infrared ray carbon sulfur analyzer.The result indicates that the sulfur in the alloy firstly exists in the form of liquid FeS,thereafter TiS(s)and eventually Ti2 S(s)during cooling.The sulfur is mainly distributed in the alloy,and only a small amount of sulfur remains in the slag.Moreover,it is noted that the sulfur in the alloy does not distribute homogeneously,and it exists in the form of solid solution phase,(Ti,Al,Fe)S.S content in the slag,the sulfur capacity of the slag and the sulfur distribution ratio(LS)all increase with the increment of CaO addition,while S content in alloys decreases.
基金Projects(51978346,51778302)supported by the National Natural Science Foundation of ChinaProject(202002N3117)supported by the Ningbo Science and Technology Project,China。
文摘An improved design method of pervious concrete was proposed to lower the deviation between the designed and actual porosity and maintain both mechanical property and permeability of pervious concrete. The improved design method is mainly based on the optimal volume ratio of paste to aggregate(VRPA), which was determined by testing the average thickness of cement paste coating aggregate. The performances of pervious concrete designed by the traditional method and the improved one were compared. The results show that with the increase of designed porosity, the reduction of compressive strength and flexural strength of pervious concrete designed by the improved method is significantly smaller than those designed by the traditional one. The maximum deviation between the designed and actual porosity of the pervious concrete by the improved method is only 1.54%, which is far less than 8.7% obtained by the traditional one. Micro-structural analysis shows that the porous distribution of pervious concrete designed by improved method exhibits better uniformity.
文摘Rubber isolation is the most mature control technology in practical application, and is widely used by short rigid buildings. However, many high isolation buildings have been built around the world in recent years, which do not follow the existing criterions and codes. Many researchers began to research the special problems caused by larger height-width ratio isolation structures. The overturning effect of high height-width ratio structures with rubber bearing is firstly studied. Considering the main factors, such as the height-width ratio of structures, type of site, the designed basic acceleration of ground motion and the decouple factor in horizon, computing experiment is defined with the Uniform Design Method, which is also known as designing isolation structure. The forces of the bearing under edge of structures based on the position of the rubber bearing are calculated. The result indicates that the rubber bearings will lose its functionality under very high tension and compressing force of earthquake motion in horizon and vertical, when the height-width ratio is over a certain value. Thus, based on the calculation result of isolation structures defined in the uniform design method, regression analysis is conducted, and also the rubber edge force regression formula are gotten, which has higher correlation and smaller standard deviation. This formula can be used to roughly calculate whether the pull force occurs at the edge of the building. By the edge bearings of isolation structure minimum force formula, the height-width ratio limited value of the isolation structure is deducted when rubber bearing has minimum force of zero.
基金supported by the National Natural Science Foundation of China (7087111770571086)
文摘An extended compromise ratio method（CRM） based on fuzzy distances is developed to solve fuzzy multi-attribute group decision making problems in which weights of attributes and ratings of alternatives on attributes are expressed with values of linguistic variables parameterized using triangular fuzzy numbers.A compromise solution is determined by introducing the ranking index based on the concept that the chosen alternative should be as close as possible to the positive ideal solution and as far away from the negative ideal solution as possible simultaneously.This proposed method is compared with other existing methods to show its feasibility and effectiveness and illustrated with an example of the military route selection problem as one of the possible applications.
基金Project supported by the Engineering and Physical Sciences Research Council(EPSRC)Turbulence Consortium Grant(No.EP/G069581/1)the Marie Curie International Incoming Fellowship(No.PIIF-GA-253453)
文摘Numerical simulations are performed to examine the packing behavior of human red blood cells(RBCs). A combined ?nite-discrete element method(FDEM) is utilized, in which the RBCs are modeled as no-friction and no-adhesion solid bodies. The packed volume and the void ratio of a large number of randomly packed RBCs are clari?ed,and the effects of the RBC shape, the mesh size, the cell number, and the container size are investigated. The results show that the packed human RBCs with normal shape have a void ratio of 28.45%, which is slightly higher than that of the ?at or thick cells used in this study. Such information is bene?cial to the further understanding on the geometric features of human RBCs and the research on RBC simulations.
文摘A ratio approach based on the simple ratio test associated with the terms of homotopy series was proposed by the author in the previous publications.It was shown in the latter through various comparative physical models that the ratio approach of identifying the range of the convergence control parameter and also an optimal value for it in the homotopy analysis method is a promising alternative to the classically used h-level curves or to the minimizing the residual(squared)error.A mathematical analysis is targeted here to prove the equivalence of both the ratio approach and the traditional residual approach,especially regarding the root-finding problems via the homotopy analysis method.Examples are provided to further justify this.Moreover,it is conjectured that every nonlinear differential equation can be considered as a root-finding problem by plugging a parameter in it from a physical viewpoint.Two examples from the boundary and initial and value problems are provided to verify this assertion.Hence,besides the advantages as deciphered in the previous publications,the feasibility of the ratio approach over the traditional residual approach is made clearer in this paper.
基金Project supported by the National Natural Science Foundation of China(21876168)the Key Projects for Common Key Technology Innovation in Key Industries in Chongqing(cstc2016zdcy-ztzx0020-01)+1 种基金Youth Innovation Promotion Association CAS(2019376)the Graduate Innovation Project of Chongqing Technology and Business University(yjscxx201803-028-22)。
文摘The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reduction of NOx by NH3.Four different methods,namely pre-impregnation,post-impregnation,coimpregnation,and co-precipitation,were used to synthesize a series of V2 O5-WO3-TiO2-CeO2-ZrO2 catalysts.The catalysts were characterized by XRD,BET,NH3-TPD,XPS,and H2-TPR techniques.Moreover,the activity and anti-K poisoning performance were tested by an NH3-SCR model reaction.The results show that the introduction of Ce^4+and Zr^4+can improve the catalytic performance of V2O5-WO3/TiO2 catalyst,but the impregnation method cannot enhance the anti-K poisoning performance.Ce^4+and Zr^4+introduced by co-precipitation method can effectively improve the tolerance of K,which is mainly due to the incorporation of Ce^4+and Zr^4+into TiO2 lattice to form a uniform TiO2-CeO2-ZrO2 solid solution,resulting in the optimal surface acidity and redox performance,and reducing the decreases caused by Kpoisoning.Furthermore,based on the best introduction method,we further optimized the molar ratio of Ce^4+/Zr^4+,It is found that the catalyst exhibits the best anti-K poisoning performance when the molar ratio of Ce^4+/Zr^4+is 2:1.
基金This work was supported by the Natural Science Foundation of Guangdong Province,China(2018 A0303131000)the project of Academician workstation of Guangdong Province,China(2014B090905001)the Fundamental Research Funds for the Central Universities,China(21617406)and the key project of Scientific and Technological projects of Guang Zhou,China(201604040007,201604020168).
文摘This study aimed to explore the application of surface-enhanced Raman scattering(SERS)in the rapid diagnosis of gastric cancer.The SERS spectra of 68 serum samples from gastric cancer patients and healthy volunteers were acquired.The characteristic ratio method(CRM)and principal component analysis(PCA)were used to differentiate gastric cancer serum from normal serum.Compared with healthy volunteers,the serum SERS intensity of gastric cancer patients was relatively high at 722 cm^(-1),while it was relatively low at 588,644,861,1008,1235,1397,1445 and 1586 cm^(-1).These results indicated that the relative content of nucleic acids in the serum of gastric cancer patients rises while the relative content of amino acids and carbohydrates decreases.In PCA,the sensitivity and specificity of discriminating gastric cancer were 94.1%and 94.1%,respectively,with the accuracy of 94.1%.Based on the intensity ratios of four characteristic peaks at 722,861,1008 and 1397 cm^(-1),CRM presented the diagnostic sensitivity and specificity of 100%and 97.4%,respectively,and the accuracy of 98.5%.Therefore,the three peak intensity ratios of I_(722)/I_(861),I_(722)/I_(1008)and I_(722)/I_(1397)can be considered as biologicalfingerprint information for gastric cancer diagnosis and can rapidly and directly reflect the physiological and pathological changes associated with gastric cancer development.This study provides an important basis and standards for the early diagnosis of gastric cancer.
