Ultrasonic biometry was done in 232 normal eyes and 138 eyes with primary angle closure glaucoma (ACG), using Ultrascan Digital B System IV (10 MHz). The ratio between the lens thickness and the axial length (lens thi...Ultrasonic biometry was done in 232 normal eyes and 138 eyes with primary angle closure glaucoma (ACG), using Ultrascan Digital B System IV (10 MHz). The ratio between the lens thickness and the axial length (lens thickness to axial length factor, LAF) was evaluated as a biometric index for assessing the eye with primary ACG in Chinese. LAF of 2.00 was found to be ideal point of demarcation between ACG and normal eyes (i.e., lens thickness equals to 1/5 of axial length). It appears that LAF is helpful i...展开更多
The design of columns relies heavily on the basis of Leonhard Euler’s Theory of Elastic Buckling.However,to increase the accuracy in determining the maximum critical load a column can withstand before buckling,a cons...The design of columns relies heavily on the basis of Leonhard Euler’s Theory of Elastic Buckling.However,to increase the accuracy in determining the maximum critical load a column can withstand before buckling,a constant was introduced.This dimensionless coefficient is K,also known as the effective-length factor.This constant is often found in building design codes and varies in value depending on the type of column support that is applied.This paper presents experimental and analytical studies on the determination of the effective-length factor in the buckling stability of columns with partially-fixed support conditions.To this end,the accurate K value of the columns tested by the Instron Testing Machine(ITM)at California State University,Northridge’s(CSUN’s)Mechanics Laboratory is determined.The ITM is used in studying the buckling of columns where the supports are neither pinned nor fixed,and the material cross-section rather rests upon the machine while loading is applied axially.Several column specimens were tested and the experimental data were analyzed in order to estimation of the accurate effective-length factor.The calculations from the tested results as well as the conducted probabilistic analysis shed light on how a fragility curve may aid in predicting the effective-length value of future tests.展开更多
The slope length factor is one of the parameters of the Universal Soil Loss Equation(USLE)and the Revised Universal Soil Loss Equation(RUSLE)and is sometimes calculated based on a digital elevation model(DEM).The meth...The slope length factor is one of the parameters of the Universal Soil Loss Equation(USLE)and the Revised Universal Soil Loss Equation(RUSLE)and is sometimes calculated based on a digital elevation model(DEM).The methods for calculating the slope length factor are important because the values obtained may depend on the methods used for calculation.The purpose of this study was to compare the difference in spatial distribution of the slope length factor between the different methods at a watershed scale.One method used the uniform slope length factor equation(USLFE)where the effects of slope irregularities(such as slope gradient,etc.)on soil erosion by water were not considered.The other method used segmented slope length factor equation(SSLFE)which considered the effects of slope irregularities on soil erosion by water.The Arc Macro Language(AML)Version 4 program for the revised universal soil loss equation(RUSLE).which uses the USLFE,was chosen to calculate the slope length factor.In a parallel analysis,the AML code of RUSLE Version 4 was modified according to the SSLFE to calculate the slope length factor.Two watersheds with different slope and gully densities were chosen.The results show that the slope length factor and soil loss using the USLFE method were lower than those using the SSLFE method,especially on downslopes watershed with more frequent steep slopes and higher gully densities.In addition,the slope length factor and soil loss calculated by the USLFE showed less spatial variation.展开更多
Background: Geographic variation in body size is assumed to reflect adaptation to local environmental conditions. Although Bergmann's rule is usually sufficient to explain such variation in homeotherms, some excep...Background: Geographic variation in body size is assumed to reflect adaptation to local environmental conditions. Although Bergmann's rule is usually sufficient to explain such variation in homeotherms, some exceptions have been documented. The relationship between altitude, latitude and body size, has been well documented for some vertebrate taxa during the past decades. However, relatively little information is available on the effects of climate variables on body size in birds.Methods: We collected the data of 267 adult Eurasian Tree Sparrow(Passer montanus) specimens sampled at 48 localities in China's mainland, and further investigated the relationships between two response variables, body mass and wing length, as well as a suit of explanatory variables, i.e. altitude, latitude, mean annual temperature(MAT), annual precipitation(PRC), annual sunshine hours(SUN), average annual wind speed(WS), air pressure(AP) and relative humidity(RH).Results: Our study showed that(1) although the sexes did not differ significantly in body mass, males had longer wings than females;(2) body mass and wing length were positively correlated with altitude but not with latitude;(3) body mass and wing length were negatively correlated with AP and RH, but not significantly correlated with WS. Body mass was positively correlated with SUN and inversely correlated with MAT. Wing length was not correlated with MAT in either sex, but was positively correlated with SUN and negatively correlated with PRC in male sparrows;(4) variation in body mass could be best explained by AP and SUN, whereas variation in wing length could be explained by RH and AP in both sexes. In addition, variation in male sparrows can be explained by SUN, WS and PRC but not in females.Conclusions: Two different proxies of body size, body mass and wing length, correlated with same geographic factors and different climate factors. These differences may reflect selection for heat conservation in the case of body mass, and for efficient flight in the case of wing length.展开更多
Formulation in terms of hypersingular integral equations for the interaction between straight and curved cracks in plane elasticity is obtained using the complex variable functions method. The curved length coordinate...Formulation in terms of hypersingular integral equations for the interaction between straight and curved cracks in plane elasticity is obtained using the complex variable functions method. The curved length coordinate method and a suitable numerical scheme are used to solve such integrals numerically for the unknown function, which are later used to find the stress intensity factor, SIF.展开更多
The embedded length of anti-slide piles for slope is analyzed by three-dimensional elastoplastic shear strength reduction method. The effect of embedded pile length on the factor of safety and pile behavior is analyze...The embedded length of anti-slide piles for slope is analyzed by three-dimensional elastoplastic shear strength reduction method. The effect of embedded pile length on the factor of safety and pile behavior is analyzed. Furthermore, the effects of pile spacing, pile head conditions, pile bending stiffness and soil properties on length and behavior of pile are also analyzed. The results show that the pile spacing and the pile head conditions have significant influences on the critical embedded length of pile. It is found that the critical embedded length of pile, beyond which the factor of safety does not increase, increases with the decrease in pile spacing. The smaller the pile spacing is, the larger the integrity of the reinforced slope will be. A theoretical analysis of the slip surface is also conducted, and the slip surface determined by the pressure on piles, considering the influences of both soil and piles for slope, is in agreement with the ones in previous studies.展开更多
In previous work, the electron radius was identified as the “actual electron radius.” However, this is more accurately described as the electron radius at rest. This study reexamines the electron with an emphasis on...In previous work, the electron radius was identified as the “actual electron radius.” However, this is more accurately described as the electron radius at rest. This study reexamines the electron with an emphasis on the electron radius under motion, incorporating the effects of length contraction. The findings suggest that the radius is subject to Lorentz contraction, which has interesting implications for relativistic effects at the subatomic level.展开更多
Ear morphological traits such as volume and shape are important features of maize and the quantitative associations among them can help understand kernel yield determination. 150 mature ears each of 4 maize cultivars ...Ear morphological traits such as volume and shape are important features of maize and the quantitative associations among them can help understand kernel yield determination. 150 mature ears each of 4 maize cultivars were collected from field experiments, and ear length(L), diameter(D), area(S) and volume(V) were recorded for individual ears, kernel weight per ear also recorded for a portion of the examined ears. Following principles of dimensional analysis, 8 theoretical equations of 3 sets,which relate ear higher dimensions to its length and diameter, were developed and parameterized and validated with the field observations. The 3 optimized equations showed that the shape of ears in maize can be featured with 3 dimensionless form factors, namely diameter-to-length ratio(c=D/L), areal form factor(b=S/L/D), and volumetric form factor(a=V/L/D/D). Statistically,all of them were significantly different among cultivars, and a's values varied from 0.582 to 0.612, and b's 0.839-0.868, and c's 0.242-0.308. Volumetric form factor and areal form factor could estimate precisely ear volume and area respectively, but diameter-to-length ratio was not suitable to estimate ear diameter by its length. Ear volume explained almost all variation of ear kernel weight and product L*D*D did the same substantially. Dimensional analysis proved to be promising in understanding relationship among morphological traits of ears in maize. Its application in crop researches should improve our knowledge of the physical properties of crop plants.展开更多
文摘Ultrasonic biometry was done in 232 normal eyes and 138 eyes with primary angle closure glaucoma (ACG), using Ultrascan Digital B System IV (10 MHz). The ratio between the lens thickness and the axial length (lens thickness to axial length factor, LAF) was evaluated as a biometric index for assessing the eye with primary ACG in Chinese. LAF of 2.00 was found to be ideal point of demarcation between ACG and normal eyes (i.e., lens thickness equals to 1/5 of axial length). It appears that LAF is helpful i...
基金The authors would like to express their great appreciation for funding made possible in support of this research endeavor through the CSU-LSAMP(California State University Louis Stokes Alliance for Minority Participation)program via the NSF(National Science Foundation)grant#HRD-1302873the Chancellor’s Office of the California State University。
文摘The design of columns relies heavily on the basis of Leonhard Euler’s Theory of Elastic Buckling.However,to increase the accuracy in determining the maximum critical load a column can withstand before buckling,a constant was introduced.This dimensionless coefficient is K,also known as the effective-length factor.This constant is often found in building design codes and varies in value depending on the type of column support that is applied.This paper presents experimental and analytical studies on the determination of the effective-length factor in the buckling stability of columns with partially-fixed support conditions.To this end,the accurate K value of the columns tested by the Instron Testing Machine(ITM)at California State University,Northridge’s(CSUN’s)Mechanics Laboratory is determined.The ITM is used in studying the buckling of columns where the supports are neither pinned nor fixed,and the material cross-section rather rests upon the machine while loading is applied axially.Several column specimens were tested and the experimental data were analyzed in order to estimation of the accurate effective-length factor.The calculations from the tested results as well as the conducted probabilistic analysis shed light on how a fragility curve may aid in predicting the effective-length value of future tests.
基金Research for this paper was funded by Program for Changjiang Scholars and Innovative Research Team in University and the Fundamental Research Funds for the Central Universities.
文摘The slope length factor is one of the parameters of the Universal Soil Loss Equation(USLE)and the Revised Universal Soil Loss Equation(RUSLE)and is sometimes calculated based on a digital elevation model(DEM).The methods for calculating the slope length factor are important because the values obtained may depend on the methods used for calculation.The purpose of this study was to compare the difference in spatial distribution of the slope length factor between the different methods at a watershed scale.One method used the uniform slope length factor equation(USLFE)where the effects of slope irregularities(such as slope gradient,etc.)on soil erosion by water were not considered.The other method used segmented slope length factor equation(SSLFE)which considered the effects of slope irregularities on soil erosion by water.The Arc Macro Language(AML)Version 4 program for the revised universal soil loss equation(RUSLE).which uses the USLFE,was chosen to calculate the slope length factor.In a parallel analysis,the AML code of RUSLE Version 4 was modified according to the SSLFE to calculate the slope length factor.Two watersheds with different slope and gully densities were chosen.The results show that the slope length factor and soil loss using the USLFE method were lower than those using the SSLFE method,especially on downslopes watershed with more frequent steep slopes and higher gully densities.In addition,the slope length factor and soil loss calculated by the USLFE showed less spatial variation.
基金supported by grants from the National Natural Science Foundation of China (NSFC, 31330073, 31672292)the Natural Science Foundation of the Department of Education, Hebei Province (YQ2014024)
文摘Background: Geographic variation in body size is assumed to reflect adaptation to local environmental conditions. Although Bergmann's rule is usually sufficient to explain such variation in homeotherms, some exceptions have been documented. The relationship between altitude, latitude and body size, has been well documented for some vertebrate taxa during the past decades. However, relatively little information is available on the effects of climate variables on body size in birds.Methods: We collected the data of 267 adult Eurasian Tree Sparrow(Passer montanus) specimens sampled at 48 localities in China's mainland, and further investigated the relationships between two response variables, body mass and wing length, as well as a suit of explanatory variables, i.e. altitude, latitude, mean annual temperature(MAT), annual precipitation(PRC), annual sunshine hours(SUN), average annual wind speed(WS), air pressure(AP) and relative humidity(RH).Results: Our study showed that(1) although the sexes did not differ significantly in body mass, males had longer wings than females;(2) body mass and wing length were positively correlated with altitude but not with latitude;(3) body mass and wing length were negatively correlated with AP and RH, but not significantly correlated with WS. Body mass was positively correlated with SUN and inversely correlated with MAT. Wing length was not correlated with MAT in either sex, but was positively correlated with SUN and negatively correlated with PRC in male sparrows;(4) variation in body mass could be best explained by AP and SUN, whereas variation in wing length could be explained by RH and AP in both sexes. In addition, variation in male sparrows can be explained by SUN, WS and PRC but not in females.Conclusions: Two different proxies of body size, body mass and wing length, correlated with same geographic factors and different climate factors. These differences may reflect selection for heat conservation in the case of body mass, and for efficient flight in the case of wing length.
基金Ministry of Science,Technology and Innovation(MOSTI),Malaysia for the Science Fund,Vot No.5450657
文摘Formulation in terms of hypersingular integral equations for the interaction between straight and curved cracks in plane elasticity is obtained using the complex variable functions method. The curved length coordinate method and a suitable numerical scheme are used to solve such integrals numerically for the unknown function, which are later used to find the stress intensity factor, SIF.
文摘The embedded length of anti-slide piles for slope is analyzed by three-dimensional elastoplastic shear strength reduction method. The effect of embedded pile length on the factor of safety and pile behavior is analyzed. Furthermore, the effects of pile spacing, pile head conditions, pile bending stiffness and soil properties on length and behavior of pile are also analyzed. The results show that the pile spacing and the pile head conditions have significant influences on the critical embedded length of pile. It is found that the critical embedded length of pile, beyond which the factor of safety does not increase, increases with the decrease in pile spacing. The smaller the pile spacing is, the larger the integrity of the reinforced slope will be. A theoretical analysis of the slip surface is also conducted, and the slip surface determined by the pressure on piles, considering the influences of both soil and piles for slope, is in agreement with the ones in previous studies.
文摘In previous work, the electron radius was identified as the “actual electron radius.” However, this is more accurately described as the electron radius at rest. This study reexamines the electron with an emphasis on the electron radius under motion, incorporating the effects of length contraction. The findings suggest that the radius is subject to Lorentz contraction, which has interesting implications for relativistic effects at the subatomic level.
基金Supported by the National Natural Science Foundation of China(31271658)National Key Research and Development Program of China(2016YFD0300306)
文摘Ear morphological traits such as volume and shape are important features of maize and the quantitative associations among them can help understand kernel yield determination. 150 mature ears each of 4 maize cultivars were collected from field experiments, and ear length(L), diameter(D), area(S) and volume(V) were recorded for individual ears, kernel weight per ear also recorded for a portion of the examined ears. Following principles of dimensional analysis, 8 theoretical equations of 3 sets,which relate ear higher dimensions to its length and diameter, were developed and parameterized and validated with the field observations. The 3 optimized equations showed that the shape of ears in maize can be featured with 3 dimensionless form factors, namely diameter-to-length ratio(c=D/L), areal form factor(b=S/L/D), and volumetric form factor(a=V/L/D/D). Statistically,all of them were significantly different among cultivars, and a's values varied from 0.582 to 0.612, and b's 0.839-0.868, and c's 0.242-0.308. Volumetric form factor and areal form factor could estimate precisely ear volume and area respectively, but diameter-to-length ratio was not suitable to estimate ear diameter by its length. Ear volume explained almost all variation of ear kernel weight and product L*D*D did the same substantially. Dimensional analysis proved to be promising in understanding relationship among morphological traits of ears in maize. Its application in crop researches should improve our knowledge of the physical properties of crop plants.
