After considering Kerr nonlinear effect, group velocity dispersion of host and gain distribution of active particle in laser amplifying medium, a basic equation describing propagation of the coupling optical pulse und...After considering Kerr nonlinear effect, group velocity dispersion of host and gain distribution of active particle in laser amplifying medium, a basic equation describing propagation of the coupling optical pulse under the multi-photon nonlinear Compton scattering in the laser amplifying medium has been deduced. Besides, the profile and power spectrum of a picosecond-level super-Gaussian coupling pulse in the laser amplifying medium have been discussed when its central frequency coincides with the gain peak frequency of the laser amplifying medium.展开更多
We present a laser-diode-pumped passively mode-locked femtosecond disordered crystal laser by using Nd：CaGdAI04 （Nd：CGA） as the gain medium. With a pair of SF6 prisms to control the dispersion compensation, laser ...We present a laser-diode-pumped passively mode-locked femtosecond disordered crystal laser by using Nd：CaGdAI04 （Nd：CGA） as the gain medium. With a pair of SF6 prisms to control the dispersion compensation, laser pulses as short as 850fs at 1079nm are obtained with a repetition rate of 124.6 MHz. The measured threshold pump power is 1.45 W. A maximum average output power of 122mW is obtained under the pump power of 5.9 W. These results show that Nd：CGA could be a promising laser medium for generating femtosecond ultrashort pulse at about 1 μm.展开更多
In order to control the ferrite and austenite percentage in duplex stainless steel welding, many researchers try to change the laser welding parameters and cooling medium, but ignore to study the influence of heat sin...In order to control the ferrite and austenite percentage in duplex stainless steel welding, many researchers try to change the laser welding parameters and cooling medium, but ignore to study the influence of heat sink effect on weld strength. In this work, the effect of aluminium heat sink and varying cooling medium on the laser welding of duplex stainless steel (DSS) 2205 is studied. The 2 mm thick DSS sheets welded with pulsed Nd: YAG laser welding machine by varying the cooling medium (air and oil) and an aluminium plate used as a heat sink. The welded specimens tested for tensile strength, micro-hardness, distortion, microstructure and radiography analysis. The faster cooling rate in the oil quenching process enhances the ferrite percentage compared with air-cooled samples. But the faster cooling rate in oil quenching leads to more distortion and using aluminium as a heat sink influenced positively the distortion to a small extent. The lower cooling rate in air quenching leads to a higher tensile strength of the welded specimen. The objective of this work is to analyse experimentally the effect of cooling medium and heat sink in the mechanical and metallurgical properties of laser welded duplex stainless steel.展开更多
Random gain medium based on organic Rhodamine 590 (R590) laser-dye and Titanium dioxide (TiO2) suspended nanoparticles have been prepared with polymethylmethacrylate (PMMA) as a host. Spray-coated homogeneous film sam...Random gain medium based on organic Rhodamine 590 (R590) laser-dye and Titanium dioxide (TiO2) suspended nanoparticles have been prepared with polymethylmethacrylate (PMMA) as a host. Spray-coated homogeneous film samples of 22.4 μm thickness. Optimum concentrations have been determined depending on the normal fluorescence spectra which give evidence that the laser dye provides amplification and TiO2 nanoparticles act as scatter center. At the optimum concentrations, results of the random gain medium under second harmonic Nd: YAG laser excitation shows that the values of bandwidth at full width half-maximum (FWHM) and the threshold energy are about 11 nm and 10 mJ respectively.展开更多
文摘After considering Kerr nonlinear effect, group velocity dispersion of host and gain distribution of active particle in laser amplifying medium, a basic equation describing propagation of the coupling optical pulse under the multi-photon nonlinear Compton scattering in the laser amplifying medium has been deduced. Besides, the profile and power spectrum of a picosecond-level super-Gaussian coupling pulse in the laser amplifying medium have been discussed when its central frequency coincides with the gain peak frequency of the laser amplifying medium.
基金Supported by the National Key Basic Research Program of China under Grant No 2013CB922402the International Joint Research Program,and the National Natural Science Foundation of China under Grant Nos 61210017 and 11434016
文摘We present a laser-diode-pumped passively mode-locked femtosecond disordered crystal laser by using Nd：CaGdAI04 （Nd：CGA） as the gain medium. With a pair of SF6 prisms to control the dispersion compensation, laser pulses as short as 850fs at 1079nm are obtained with a repetition rate of 124.6 MHz. The measured threshold pump power is 1.45 W. A maximum average output power of 122mW is obtained under the pump power of 5.9 W. These results show that Nd：CGA could be a promising laser medium for generating femtosecond ultrashort pulse at about 1 μm.
文摘In order to control the ferrite and austenite percentage in duplex stainless steel welding, many researchers try to change the laser welding parameters and cooling medium, but ignore to study the influence of heat sink effect on weld strength. In this work, the effect of aluminium heat sink and varying cooling medium on the laser welding of duplex stainless steel (DSS) 2205 is studied. The 2 mm thick DSS sheets welded with pulsed Nd: YAG laser welding machine by varying the cooling medium (air and oil) and an aluminium plate used as a heat sink. The welded specimens tested for tensile strength, micro-hardness, distortion, microstructure and radiography analysis. The faster cooling rate in the oil quenching process enhances the ferrite percentage compared with air-cooled samples. But the faster cooling rate in oil quenching leads to more distortion and using aluminium as a heat sink influenced positively the distortion to a small extent. The lower cooling rate in air quenching leads to a higher tensile strength of the welded specimen. The objective of this work is to analyse experimentally the effect of cooling medium and heat sink in the mechanical and metallurgical properties of laser welded duplex stainless steel.
文摘Random gain medium based on organic Rhodamine 590 (R590) laser-dye and Titanium dioxide (TiO2) suspended nanoparticles have been prepared with polymethylmethacrylate (PMMA) as a host. Spray-coated homogeneous film samples of 22.4 μm thickness. Optimum concentrations have been determined depending on the normal fluorescence spectra which give evidence that the laser dye provides amplification and TiO2 nanoparticles act as scatter center. At the optimum concentrations, results of the random gain medium under second harmonic Nd: YAG laser excitation shows that the values of bandwidth at full width half-maximum (FWHM) and the threshold energy are about 11 nm and 10 mJ respectively.
