Laser driven flyer plate technology offers improved safety and reliability for detonation of explosives in industrial applications ranging from mining and stone quarrying to the aerospace and defense industries.This s...Laser driven flyer plate technology offers improved safety and reliability for detonation of explosives in industrial applications ranging from mining and stone quarrying to the aerospace and defense industries.This study is based on developing a safer laser driven flyer plate prototype comprised of a laser initiator and a flyer plate subsystem that can be used with secondary explosives.System parameters were optimized to initiate the shock-to-detonation transition(SDT)of a secondary explosive based on the impact created by the flyer plate on the explosive surface.Rupture of the flyer was investigated at the mechanically weakened region located on the interface of these subsystems,where the product gases from the deflagration of the explosive provide the required energy.A bilayer energetic material was used,where the first layer consisted of a pyrotechnic component,zirconium potassium perchlorate(ZPP),for sustaining the ignition by the laser beam and the second layer consisted of an insensitive explosive,cyclotetramethylene-tetranitramine(HMX),for deflagration.A plexiglass interface was used to enfold the energetic material.The focal length of the laser beam from the diode was optimized to provide a homogeneous beam profile with maximum power at the surface of the ZPP.Closed bomb experiments were conducted in an internal volume of 10 cm^(3) for evaluation of performance.Dependency of the laser driven flyer plate system output on confinement,explosive density,and laser beam power were analyzed.Measurements using a high-speed camera resulted in a flyer velocity of 670±20 m/s that renders the prototype suitable as a laser detonator in applications,where controlled employment of explosives is critical.展开更多
Effects of ions charge-mass ratio on energy and energy spread of accelerated ions in laser driven plasma are investigated in detail by proposing a simple double-layer model for a foil target driven by an ultrastrong l...Effects of ions charge-mass ratio on energy and energy spread of accelerated ions in laser driven plasma are investigated in detail by proposing a simple double-layer model for a foil target driven by an ultrastrong laser. The radiation pressure acceleration mechanism plays an important role on the studied problem. For the ions near the plasma mirror, i.e. electrons layer, the dependence of ions energy on their charge-mass ratio is derived theoretically. It is found that the larger the charge-mass ratio is, the higher the accelerated ions energy gets. For those ions far away from the layer, the dependence of energy and energy spread on ions charge-mass ratio are also obtained by numerical performance. It exhibits that, as ions charge-mass ratio increases, not only the accelerated ions energy but also the energy spread will become large.展开更多
A reshock experiment for investigating the growth of material mixing driven by the Richtmyer–Meshkov instability has been conducted at the SG 100 kJ Laser Facility.We present a novel measurement technique for capturi...A reshock experiment for investigating the growth of material mixing driven by the Richtmyer–Meshkov instability has been conducted at the SG 100 kJ Laser Facility.We present a novel measurement technique for capturing the density field and the temporal evolution of the mixing width in rough aluminum subjected to reshocks under extreme conditions.The temporal evolution of the aluminum layer width obtained from backlit X-ray radiography demonstrates a sharp increase in width caused by reshocks,and simulations using the BHR-2 turbulent mixing model show excellent agreement with the measured aluminum layer width.Moreover,by utilizing a quasi-monochromatic X-ray imaging system at 5.2 keV,based on Bragg reflection from a spherically curved quartz crystal,we demonstrate direct quantification of the aluminum density field in mixed regions for the first time in a indirectly driven reshock experiment.The deviation between the calculated and actual density values is significantly less than 10%when the density of the aluminum region is below 0.7 g/cm3.The density field provides further information about variable-density turbulent mixing,which improves the constraints on simulations and enhances predictive capabilities for inertial confinement fusion target design and astrophysical shock scenarios.展开更多
Experimental validation of laser intensity is particularly important for the study of fundamental physics at extremely high intensities.However,reliable diagnosis of the focal spot and peak intensity faces huge challe...Experimental validation of laser intensity is particularly important for the study of fundamental physics at extremely high intensities.However,reliable diagnosis of the focal spot and peak intensity faces huge challenges.In this work,we demonstrate for the firs time that the coherent radiation farfiel patterns from laser–foil interactions can serve as an in situ,real-time,and easy-to-implement diagnostic for an ultraintense laser focus.The laser-driven electron sheets,curved by the spatially varying laser fiel and leaving the targets at nearly the speed of light,produce doughnut-shaped patterns depending on the shapes of the focal spot and the absolute laser intensities.Assisted by particle-in-cell simulations,we can achieve measurements of the intensity and the focal spot,and provide immediate feedback to optimize the focal spots for extremely high intensity.展开更多
The significance of laser-driven polarized beam acceleration has been increasingly recognized in recent years.We propose an efficient method for generating polarized proton beams from a pre-polarized hydrogen halide g...The significance of laser-driven polarized beam acceleration has been increasingly recognized in recent years.We propose an efficient method for generating polarized proton beams from a pre-polarized hydrogen halide gas jet,utilizing magnetic vortex acceleration enhanced by a laser-driven plasma bubble.When a petawatt laser pulse passes through a pre-polarized gas jet,a bubble-like ultra-nonlinear plasma wave is formed.As a portion of the particles constituting this wave,background protons are swept by the acceleration field of the bubble and oscillate significantly along the laser propagation axis.Some of the pre-accelerated protons in the plasma wave are trapped by the acceleration field at the rear side of the target.This acceleration field is intensified by the transverse expansion of the laser-driven magnetic vortex,resulting in energetic polarized proton beams.The spin of energetic protons is determined by their precession within the electromagnetic field,which is described using the Thomas-Bargmann-Michel-Telegdi equation in analytical models and particle-in-cell simulations.Multidimensional simulations reveal that monoenergetic proton beams with an energy of hundreds of MeV,a beam charge of hundreds of pC,and a beam polarization of tens of percent can be produced at laser powers of several petawatts.Such laser-driven polarized proton beams have promise for application in polarized beam colliders,where they can be utilized to investigate particle interactions and to explore the properties of matter under extreme conditions.展开更多
Driving of the nuclear fusion reaction p+^(11)B3α+8.7 MeV under laboratory conditions by interaction between high-power laser pulses and matter has become a popular field of research,owing to its numerous potential a...Driving of the nuclear fusion reaction p+^(11)B3α+8.7 MeV under laboratory conditions by interaction between high-power laser pulses and matter has become a popular field of research,owing to its numerous potential applications:as an alternative to deuterium-tritium for fusion energy production,astrophysics studies,and alpha-particle generation for medical treatment.One possible scheme for laser-driven p-^(11)B reactions is to direct a beam of laser-accelerated protons onto a boron(B)sample(the so-called“pitcher-catcher”scheme).This technique has been successfully implemented on large high-energy lasers,yielding hundreds of joules per shot at low repetition.We present here a complementary approach,exploiting the high repetition rate of the VEGA III petawatt laser at CLPU(Spain),aiming at accumulating results from many interactions at much lower energy,to provide better control of the parameters and the statistics of the measurements.Despite a moderate energy per pulse,our experiment allowed exploration of the laser-driven fusion process with tens(up to hundreds)of laser shots.The experiment provided a clear signature of the reactions involved and of the fusion products,accumulated over many shots,leading to an improved optimization of the diagnostics for experimental campaigns of this type.In this paper,we discuss the effectiveness of laser-driven p-11B fusion in the pitcher-catcher scheme,at a high repetition rate,addressing the challenges of this experimental scheme and highlighting its critical aspects.Our proposed methodology allows evaluation of the performance of this scheme for laser-driven alpha particle production and can be adapted to high-repetition-rate laser facilities with higher energy and intensity.展开更多
We theoretically investigate the characteristics of terahertz(THz) radiation from monolayer graphene exposed to normal incident few-cycle laser pulses, by numerically solving the extended semiconductor Bloch equations...We theoretically investigate the characteristics of terahertz(THz) radiation from monolayer graphene exposed to normal incident few-cycle laser pulses, by numerically solving the extended semiconductor Bloch equations. Our simulations show that the THz spectra in low frequency regions are highly dependent on the carrier envelope phase(CEP) of driving laser pulses. Using an optimal CEP of few-cycle laser pulses, we can obtain broadband strong THz waves, due to the symmetry breaking of the laser-graphene system. Our results also show that the strength of the THz spectra depend on both the intensity and central wavelength of the laser pulses. The intensity dependence of the THz wave can be described by the excitation rate of graphene, while wavelength dependence can be traced back to the band velocity and the population of graphene. We find that a near single-cycle THz pulse can be obtained from graphene driven by a mid-infrared laser pulse.展开更多
Laser-driven flier impact experiments have been designed and performed at the SG-III prototype laser facility. The continuum phase plate（CPP） technique is used for the 3 ns quadrate laser pulse to produce a relative...Laser-driven flier impact experiments have been designed and performed at the SG-III prototype laser facility. The continuum phase plate（CPP） technique is used for the 3 ns quadrate laser pulse to produce a relatively uniform irradiated spot of 2 mm. The peak laser intensity is 2.7×10^13W/cm^2 and it accelerates the aluminum flier with a density gradient configuration to a high average speed of 21.3 km/s, as determined by the flight-of-time method with line VISAR. The flier decelerates on impact with a transparent silica window, providing a measure of the flatness of the flier after one hundred microns of flight. The subsequent shock wave acceleration, pursuing, and decay in the silica window are interpreted by hydrodynamic simulation. This method provides a promising method to create unique conditions for the study of a material＇s properties.展开更多
The discovery of the essential difference of maximum ion energy for TW-pslaser plasma interaction compared with, the 100 ns laser pulses led to the theory of a skin layermodel where the control of prepulses suppressed...The discovery of the essential difference of maximum ion energy for TW-pslaser plasma interaction compared with, the 100 ns laser pulses led to the theory of a skin layermodel where the control of prepulses suppressed the usual relativistic self-focusing. The subsequentgeneration of two nonlinear force driven blocks has been demonstrated experimentally and inextensive numerical studies where one block moves against the laser light and the other block intothe irradiated target. These blocks of nearly solid state density DT plasma correspond to ion beamcurrent densities exceeding 10^(10) A/cm^2 where the ion velocity can be chosen up to highlyrelativistic values. Using the results of the expected ignition of DT fuel by light ion beams, aself-sustained fusion reaction front may be generated even into uncompressed solid DT fuel similarto the Nuckolls-Wood scheme where 10 kJ laser pulses produce 100 MJ fusion energy. This new andsimplified scheme of laser-ICF needs and optimisation of the involved parameters.展开更多
Electromagnetic pulses(EMPs)produced by the interaction of a TW femtosecond laser with solid targets at the Compact Laser Plasma Accelerator(CLAPA)are measured and interpreted.The statistical results confirm that the ...Electromagnetic pulses(EMPs)produced by the interaction of a TW femtosecond laser with solid targets at the Compact Laser Plasma Accelerator(CLAPA)are measured and interpreted.The statistical results confirm that the intensities of the EMPs are closely related to both target material and thickness.The signal of the titanium target is more abundant than that of the copper target with the same thickness,and the intensity of EMP is positively correlated with the target thickness for aluminium foil.With the boosted EMP radiations,the energy of accelerated protons is also simultaneously enhanced.In addition,EMPs emitted from the front of the target exceed those from the rear,which are also pertinent to the specific target position.The resonant waveforms in the target chamber are analyzed using the fast Fourier transform,and the local resonance and the attenuation lead to changes of the frequency spectra of EMPs with variation of detecting positions,which is well supported by the modeling results.The findings are beneficial to gaining insight into the mechanism of EMP propagation in a typical target chamber and providing more information for EMP shielding design.展开更多
The effect of the laser spot size on the neutron yield of table-top nuclear fusion from explosions of a femtosecond intense laser pulse heated deuterium clusters is investigated by using a simplified model, in which t...The effect of the laser spot size on the neutron yield of table-top nuclear fusion from explosions of a femtosecond intense laser pulse heated deuterium clusters is investigated by using a simplified model, in which the cluster size distribution and the energy attenuation of the laser as it propagates through the cluster jet are taken into account. It has been found that there exists a proper laser spot size for the maximum fusion neutron yield for a given laser pulse and a specific deuterium gas cluster jet. The proper spot size, which is dependent on the laser parameters and the cluster jet parameters, has been calculated and compared with the available experimental data. A reasonable agreement between the calculated results and the published experimental results is found.展开更多
A fundamental difference of very high intensity laser interaction with plasmas from solid targets appears with lasing at picosecond （ps） pulse durations in contrast to pulses of nanosec-onds （ns）. This can be seen...A fundamental difference of very high intensity laser interaction with plasmas from solid targets appears with lasing at picosecond （ps） pulse durations in contrast to pulses of nanosec-onds （ns）. This can be seen from the more than 10,000 times higher acceleration with ps pulse du-rations than with thermal pressure determined interaction. A ps pulse duration produces instantly acting high-efficiency nonlinear （ponderomotive） electrodynamic force dominated acceleration in contrast to heating with longer pulses. The ps pulses accelerate high-density plasma blocks. This can be used by a new scheme of side-on driven laser fusion with generating a flame ignition in uncompressed fusion fuel of solid density resulting in a reaction velocity of more than 2000 km/s for DT.展开更多
In the 1970s,scientists began experimenting with powerful laser beams to compress and heat the hydrogen isotopes to the point of fusion,a technique called ICF(Inertial Confinement Fusion).In the“direct drive”approac...In the 1970s,scientists began experimenting with powerful laser beams to compress and heat the hydrogen isotopes to the point of fusion,a technique called ICF(Inertial Confinement Fusion).In the“direct drive”approach to ICF,powerful beams of laser light are focused on a small spherical pellet containing micrograms of deuterium and tritium.The rapid heating caused by the laser“driver”makes the outer layer of the target explode.In keeping with Isaac Newton’s Third Law“For every action,there is an equal and opposite reaction”,the remaining portion of the target is driven inwards in a rocket-like implosion,causing compression of the fuel inside the capsule and the formation of a shock wave,which further heats the fuel in the very center and results in a self-sustaining burn.The fusion burn propagates outward through the cooler,outer regions of the capsule much more rapidly than the capsule can expand.Instead of magnetic fields,the plasma is confined by the inertia of its own mass—hence the term inertial confinement fusion.A similar process can be observed on an astrophysical scale in stars and the terrestrial uber world,that have exhausted their nuclear fuel,hence inertially or gravitationally collapsing and generating a supernova explosion,where the results can easily be converted to induction of energy in control forms for a peaceful purpose(i.e.,inertial fusion reaction)by means of thermal physics and statistical mechanics behavior of an ideal Fermi gas,utilizing Fermi-Degeneracy and Thomas-Fermi theory.The fundamental understanding of thermal physics and statistical mechanics enables us to have a better understanding of Fermi-Degeneracy as well as Thomas-Fermi theory of ideal gas,which results in laser compressing matter to a super high density for purpose of producing thermonuclear energy in way of controlled form for peaceful shape and form i.e.CTR(Controlled Thermonuclear Reaction).In this short review,we have concentrated on Fundamental of State Equations by driving them as it was evaluated in book Statistical Mechanics written by Mayer,J.and Mayer,M.in this article.展开更多
X-ray scattering has been an indispensable tool in advancing our understanding of matter,from the first evidence of the crystal lattice to recent discoveries of nuclei’s fastest dynamics.In addition to the lattice,ul...X-ray scattering has been an indispensable tool in advancing our understanding of matter,from the first evidence of the crystal lattice to recent discoveries of nuclei’s fastest dynamics.In addition to the lattice,ultrafast resonant elastic scattering of soft X-rays provides a sensitive probe of charge,spin,and orbital order with unparalleled nanometre spatial and femto-to picosecond temporal resolution.However,the full potential of this technique remains largely unexploited due to its high demand on the X-ray source.Only a selected number of instruments at large-scale facilities can deliver the required short-pulsed and wavelength-tunable radiation,rendering laboratory-scale experiments elusive so far.Here,we demonstrate time-resolved X-ray scattering with spectroscopic contrast at a laboratory-based instrument using the soft-X-ray radiation emitted from a laser-driven plasma source.Specifically,we investigate the photo-induced response of magnetic domains emerging in a ferrimagnetic FeGd heterostructure with 9 ps temporal resolution.The achieved sensitivity allows for tracking the reorganisation of the domain network on pico-to nanosecond time scales in great detail.This instrumental development and experimental demonstration break new ground for studying material dynamics in a wide range of laterally ordered systems in a flexible laboratory environment.展开更多
Based on the introduction to theresearch status and trend of international space-based laser debris re-moval technology, the existing problems of space-based laser debris removal technology are systematically analyzed...Based on the introduction to theresearch status and trend of international space-based laser debris re-moval technology, the existing problems of space-based laser debris removal technology are systematically analyzed.In view of the existing problems, the work and research progress of the Beijing Institute of Spacecraft EnvironmentEngineering in this field are introduced from several aspects, such as dynamic behavior of laser-driven debris, orbittransfer model, ground simulation system, space-based removal system scheme and target selection strategy. The mainresearch methods include laser-driven micro-impulse measurement experiment, surface triangulation three-dimension-al reconstruction calculation method based on laser-material interaction theory, simulation calculation based on orbitaldynamics, etc. It also looks forward to the future research direction in the field of this technology.展开更多
Aim: The present study evaluated the magnitude of temperature changes in the tooth during cavitation produced by an Er,Cr:YSGG laser. Methods: The root canal of a single extracted maxillary canine was enlarged to a si...Aim: The present study evaluated the magnitude of temperature changes in the tooth during cavitation produced by an Er,Cr:YSGG laser. Methods: The root canal of a single extracted maxillary canine was enlarged to a size 30/.02 file. Four thermocouples were attached to the tooth: one to the surface of the root and three inserted into the canal at 3, 9, and 15 mm from the apical foramen, respectively. The tooth was placed in a plastic container at room temperature around 25°C. The tooth was processed as follows. In the EDTA condition, the tooth was irrigated with 17% EDTA;in the NaOCl condition, the tooth was irrigated with 3% NaOCl;and to analyse the effect of different thicknesses of dentin, the tooth was irrigated with tap water. In all conditions, the irrigants were activated at 2 W for 120 seconds. Results: The mean temperature was 25.2°C to 27.1°C and the temperature ranged from 25.0°C to 29.6°C. The temperature elevation measured during cavitation generated by the laser didnot exceed 5°C. Conclusions: The magnitude of the temperature changes in the root canal and at the surface of the tooth did not exceed 5°C when laser-driven irrigation was used to produce cavitation in the root canal.展开更多
文摘Laser driven flyer plate technology offers improved safety and reliability for detonation of explosives in industrial applications ranging from mining and stone quarrying to the aerospace and defense industries.This study is based on developing a safer laser driven flyer plate prototype comprised of a laser initiator and a flyer plate subsystem that can be used with secondary explosives.System parameters were optimized to initiate the shock-to-detonation transition(SDT)of a secondary explosive based on the impact created by the flyer plate on the explosive surface.Rupture of the flyer was investigated at the mechanically weakened region located on the interface of these subsystems,where the product gases from the deflagration of the explosive provide the required energy.A bilayer energetic material was used,where the first layer consisted of a pyrotechnic component,zirconium potassium perchlorate(ZPP),for sustaining the ignition by the laser beam and the second layer consisted of an insensitive explosive,cyclotetramethylene-tetranitramine(HMX),for deflagration.A plexiglass interface was used to enfold the energetic material.The focal length of the laser beam from the diode was optimized to provide a homogeneous beam profile with maximum power at the surface of the ZPP.Closed bomb experiments were conducted in an internal volume of 10 cm^(3) for evaluation of performance.Dependency of the laser driven flyer plate system output on confinement,explosive density,and laser beam power were analyzed.Measurements using a high-speed camera resulted in a flyer velocity of 670±20 m/s that renders the prototype suitable as a laser detonator in applications,where controlled employment of explosives is critical.
基金Supported by the National Natural Science Foundation of China (NNSFC) under Grant Nos. 11175023 and 10834008partially by the Fundamental Research Funds for the Central Universities (FRFCU)
文摘Effects of ions charge-mass ratio on energy and energy spread of accelerated ions in laser driven plasma are investigated in detail by proposing a simple double-layer model for a foil target driven by an ultrastrong laser. The radiation pressure acceleration mechanism plays an important role on the studied problem. For the ions near the plasma mirror, i.e. electrons layer, the dependence of ions energy on their charge-mass ratio is derived theoretically. It is found that the larger the charge-mass ratio is, the higher the accelerated ions energy gets. For those ions far away from the layer, the dependence of energy and energy spread on ions charge-mass ratio are also obtained by numerical performance. It exhibits that, as ions charge-mass ratio increases, not only the accelerated ions energy but also the energy spread will become large.
基金supported by the National Key R&D Program of China(Grant No.2023YFA1608400)the National Natural Science Foundation of China(Grant Nos.12205275 and 12588301).
文摘A reshock experiment for investigating the growth of material mixing driven by the Richtmyer–Meshkov instability has been conducted at the SG 100 kJ Laser Facility.We present a novel measurement technique for capturing the density field and the temporal evolution of the mixing width in rough aluminum subjected to reshocks under extreme conditions.The temporal evolution of the aluminum layer width obtained from backlit X-ray radiography demonstrates a sharp increase in width caused by reshocks,and simulations using the BHR-2 turbulent mixing model show excellent agreement with the measured aluminum layer width.Moreover,by utilizing a quasi-monochromatic X-ray imaging system at 5.2 keV,based on Bragg reflection from a spherically curved quartz crystal,we demonstrate direct quantification of the aluminum density field in mixed regions for the first time in a indirectly driven reshock experiment.The deviation between the calculated and actual density values is significantly less than 10%when the density of the aluminum region is below 0.7 g/cm3.The density field provides further information about variable-density turbulent mixing,which improves the constraints on simulations and enhances predictive capabilities for inertial confinement fusion target design and astrophysical shock scenarios.
基金supported by the Guangdong High Level Innovation Research Institute(Grant No.2021B0909050006)the National Grand Instrument Project(Grant No.2019YFF01014402)+1 种基金the National Natural Science Foundation of China(Grant No.12205008)support from the National Science Fund for Distinguished Young Scholars(Grant No.12225501)。
文摘Experimental validation of laser intensity is particularly important for the study of fundamental physics at extremely high intensities.However,reliable diagnosis of the focal spot and peak intensity faces huge challenges.In this work,we demonstrate for the firs time that the coherent radiation farfiel patterns from laser–foil interactions can serve as an in situ,real-time,and easy-to-implement diagnostic for an ultraintense laser focus.The laser-driven electron sheets,curved by the spatially varying laser fiel and leaving the targets at nearly the speed of light,produce doughnut-shaped patterns depending on the shapes of the focal spot and the absolute laser intensities.Assisted by particle-in-cell simulations,we can achieve measurements of the intensity and the focal spot,and provide immediate feedback to optimize the focal spots for extremely high intensity.
基金supported by the National Natural Science Foundation of China(Grant Nos.12075081 and 12404395)the Innovation Group Project of the Natural Science Foundation of Hubei Province of China(Grant No.2024AFA038)Bin Liu acknowledges the support of Guangdong High Level Innovation Research Institute Project,Grant No.2021B0909050006.
文摘The significance of laser-driven polarized beam acceleration has been increasingly recognized in recent years.We propose an efficient method for generating polarized proton beams from a pre-polarized hydrogen halide gas jet,utilizing magnetic vortex acceleration enhanced by a laser-driven plasma bubble.When a petawatt laser pulse passes through a pre-polarized gas jet,a bubble-like ultra-nonlinear plasma wave is formed.As a portion of the particles constituting this wave,background protons are swept by the acceleration field of the bubble and oscillate significantly along the laser propagation axis.Some of the pre-accelerated protons in the plasma wave are trapped by the acceleration field at the rear side of the target.This acceleration field is intensified by the transverse expansion of the laser-driven magnetic vortex,resulting in energetic polarized proton beams.The spin of energetic protons is determined by their precession within the electromagnetic field,which is described using the Thomas-Bargmann-Michel-Telegdi equation in analytical models and particle-in-cell simulations.Multidimensional simulations reveal that monoenergetic proton beams with an energy of hundreds of MeV,a beam charge of hundreds of pC,and a beam polarization of tens of percent can be produced at laser powers of several petawatts.Such laser-driven polarized proton beams have promise for application in polarized beam colliders,where they can be utilized to investigate particle interactions and to explore the properties of matter under extreme conditions.
基金funded by the European Union via the Euratom Research and Training Program(Grant Agreement No.101052200-EUROfusion)funding from LASERLAB-EUROPE(Grant Agreement No.871124,European Union’s Horizon 2020 Research and Innovation Program)+5 种基金supported in part by the United States Department of Energy under Grant No.DE-FG02-93ER40773We also acknowledge support from Grant No.PID2021-125389OA-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER,UEby“ERDF A Way of Making Europe”by the European Union and Unidad de Investigación Consolidada of Junta de Castilla y León UIC 167supported in part by the National Natural Science Foundation of China under Grant No.12375125the Fundamental Research Funds for the Central Universitiesthe support of the Czech Science Foundation through Grant No.GACR24-11398S.
文摘Driving of the nuclear fusion reaction p+^(11)B3α+8.7 MeV under laboratory conditions by interaction between high-power laser pulses and matter has become a popular field of research,owing to its numerous potential applications:as an alternative to deuterium-tritium for fusion energy production,astrophysics studies,and alpha-particle generation for medical treatment.One possible scheme for laser-driven p-^(11)B reactions is to direct a beam of laser-accelerated protons onto a boron(B)sample(the so-called“pitcher-catcher”scheme).This technique has been successfully implemented on large high-energy lasers,yielding hundreds of joules per shot at low repetition.We present here a complementary approach,exploiting the high repetition rate of the VEGA III petawatt laser at CLPU(Spain),aiming at accumulating results from many interactions at much lower energy,to provide better control of the parameters and the statistics of the measurements.Despite a moderate energy per pulse,our experiment allowed exploration of the laser-driven fusion process with tens(up to hundreds)of laser shots.The experiment provided a clear signature of the reactions involved and of the fusion products,accumulated over many shots,leading to an improved optimization of the diagnostics for experimental campaigns of this type.In this paper,we discuss the effectiveness of laser-driven p-11B fusion in the pitcher-catcher scheme,at a high repetition rate,addressing the challenges of this experimental scheme and highlighting its critical aspects.Our proposed methodology allows evaluation of the performance of this scheme for laser-driven alpha particle production and can be adapted to high-repetition-rate laser facilities with higher energy and intensity.
基金Supported by the National Natural Science Foundation of China (Grant Nos.11764038,11864037,11765018,and 91850209)。
文摘We theoretically investigate the characteristics of terahertz(THz) radiation from monolayer graphene exposed to normal incident few-cycle laser pulses, by numerically solving the extended semiconductor Bloch equations. Our simulations show that the THz spectra in low frequency regions are highly dependent on the carrier envelope phase(CEP) of driving laser pulses. Using an optimal CEP of few-cycle laser pulses, we can obtain broadband strong THz waves, due to the symmetry breaking of the laser-graphene system. Our results also show that the strength of the THz spectra depend on both the intensity and central wavelength of the laser pulses. The intensity dependence of the THz wave can be described by the excitation rate of graphene, while wavelength dependence can be traced back to the band velocity and the population of graphene. We find that a near single-cycle THz pulse can be obtained from graphene driven by a mid-infrared laser pulse.
文摘Laser-driven flier impact experiments have been designed and performed at the SG-III prototype laser facility. The continuum phase plate（CPP） technique is used for the 3 ns quadrate laser pulse to produce a relatively uniform irradiated spot of 2 mm. The peak laser intensity is 2.7×10^13W/cm^2 and it accelerates the aluminum flier with a density gradient configuration to a high average speed of 21.3 km/s, as determined by the flight-of-time method with line VISAR. The flier decelerates on impact with a transparent silica window, providing a measure of the flatness of the flier after one hundred microns of flight. The subsequent shock wave acceleration, pursuing, and decay in the silica window are interpreted by hydrodynamic simulation. This method provides a promising method to create unique conditions for the study of a material＇s properties.
文摘The discovery of the essential difference of maximum ion energy for TW-pslaser plasma interaction compared with, the 100 ns laser pulses led to the theory of a skin layermodel where the control of prepulses suppressed the usual relativistic self-focusing. The subsequentgeneration of two nonlinear force driven blocks has been demonstrated experimentally and inextensive numerical studies where one block moves against the laser light and the other block intothe irradiated target. These blocks of nearly solid state density DT plasma correspond to ion beamcurrent densities exceeding 10^(10) A/cm^2 where the ion velocity can be chosen up to highlyrelativistic values. Using the results of the expected ignition of DT fuel by light ion beams, aself-sustained fusion reaction front may be generated even into uncompressed solid DT fuel similarto the Nuckolls-Wood scheme where 10 kJ laser pulses produce 100 MJ fusion energy. This new andsimplified scheme of laser-ICF needs and optimisation of the involved parameters.
基金supported by the National Natural Science Foundation of China(Grant Nos.11975037 and 11921006)the National Grand Instrument Project of China(Grant Nos.2019YFF01014400 and 2019YFF01014404)。
文摘Electromagnetic pulses(EMPs)produced by the interaction of a TW femtosecond laser with solid targets at the Compact Laser Plasma Accelerator(CLAPA)are measured and interpreted.The statistical results confirm that the intensities of the EMPs are closely related to both target material and thickness.The signal of the titanium target is more abundant than that of the copper target with the same thickness,and the intensity of EMP is positively correlated with the target thickness for aluminium foil.With the boosted EMP radiations,the energy of accelerated protons is also simultaneously enhanced.In addition,EMPs emitted from the front of the target exceed those from the rear,which are also pertinent to the specific target position.The resonant waveforms in the target chamber are analyzed using the fast Fourier transform,and the local resonance and the attenuation lead to changes of the frequency spectra of EMPs with variation of detecting positions,which is well supported by the modeling results.The findings are beneficial to gaining insight into the mechanism of EMP propagation in a typical target chamber and providing more information for EMP shielding design.
基金Project supported by the National Basic Research Program of China (Grant No 2006CB806000)the National Natural Science Foundation of China (Grant No 10535070)
文摘The effect of the laser spot size on the neutron yield of table-top nuclear fusion from explosions of a femtosecond intense laser pulse heated deuterium clusters is investigated by using a simplified model, in which the cluster size distribution and the energy attenuation of the laser as it propagates through the cluster jet are taken into account. It has been found that there exists a proper laser spot size for the maximum fusion neutron yield for a given laser pulse and a specific deuterium gas cluster jet. The proper spot size, which is dependent on the laser parameters and the cluster jet parameters, has been calculated and compared with the available experimental data. A reasonable agreement between the calculated results and the published experimental results is found.
文摘A fundamental difference of very high intensity laser interaction with plasmas from solid targets appears with lasing at picosecond （ps） pulse durations in contrast to pulses of nanosec-onds （ns）. This can be seen from the more than 10,000 times higher acceleration with ps pulse du-rations than with thermal pressure determined interaction. A ps pulse duration produces instantly acting high-efficiency nonlinear （ponderomotive） electrodynamic force dominated acceleration in contrast to heating with longer pulses. The ps pulses accelerate high-density plasma blocks. This can be used by a new scheme of side-on driven laser fusion with generating a flame ignition in uncompressed fusion fuel of solid density resulting in a reaction velocity of more than 2000 km/s for DT.
文摘In the 1970s,scientists began experimenting with powerful laser beams to compress and heat the hydrogen isotopes to the point of fusion,a technique called ICF(Inertial Confinement Fusion).In the“direct drive”approach to ICF,powerful beams of laser light are focused on a small spherical pellet containing micrograms of deuterium and tritium.The rapid heating caused by the laser“driver”makes the outer layer of the target explode.In keeping with Isaac Newton’s Third Law“For every action,there is an equal and opposite reaction”,the remaining portion of the target is driven inwards in a rocket-like implosion,causing compression of the fuel inside the capsule and the formation of a shock wave,which further heats the fuel in the very center and results in a self-sustaining burn.The fusion burn propagates outward through the cooler,outer regions of the capsule much more rapidly than the capsule can expand.Instead of magnetic fields,the plasma is confined by the inertia of its own mass—hence the term inertial confinement fusion.A similar process can be observed on an astrophysical scale in stars and the terrestrial uber world,that have exhausted their nuclear fuel,hence inertially or gravitationally collapsing and generating a supernova explosion,where the results can easily be converted to induction of energy in control forms for a peaceful purpose(i.e.,inertial fusion reaction)by means of thermal physics and statistical mechanics behavior of an ideal Fermi gas,utilizing Fermi-Degeneracy and Thomas-Fermi theory.The fundamental understanding of thermal physics and statistical mechanics enables us to have a better understanding of Fermi-Degeneracy as well as Thomas-Fermi theory of ideal gas,which results in laser compressing matter to a super high density for purpose of producing thermonuclear energy in way of controlled form for peaceful shape and form i.e.CTR(Controlled Thermonuclear Reaction).In this short review,we have concentrated on Fundamental of State Equations by driving them as it was evaluated in book Statistical Mechanics written by Mayer,J.and Mayer,M.in this article.
基金funding from the Leibniz Association through the Leibniz Junior Research Group Grant No.J134/2022from the Deutsche Forschungsgemeinschaft(DFG)through TRR 227,Project No.A02.
文摘X-ray scattering has been an indispensable tool in advancing our understanding of matter,from the first evidence of the crystal lattice to recent discoveries of nuclei’s fastest dynamics.In addition to the lattice,ultrafast resonant elastic scattering of soft X-rays provides a sensitive probe of charge,spin,and orbital order with unparalleled nanometre spatial and femto-to picosecond temporal resolution.However,the full potential of this technique remains largely unexploited due to its high demand on the X-ray source.Only a selected number of instruments at large-scale facilities can deliver the required short-pulsed and wavelength-tunable radiation,rendering laboratory-scale experiments elusive so far.Here,we demonstrate time-resolved X-ray scattering with spectroscopic contrast at a laboratory-based instrument using the soft-X-ray radiation emitted from a laser-driven plasma source.Specifically,we investigate the photo-induced response of magnetic domains emerging in a ferrimagnetic FeGd heterostructure with 9 ps temporal resolution.The achieved sensitivity allows for tracking the reorganisation of the domain network on pico-to nanosecond time scales in great detail.This instrumental development and experimental demonstration break new ground for studying material dynamics in a wide range of laterally ordered systems in a flexible laboratory environment.
文摘Based on the introduction to theresearch status and trend of international space-based laser debris re-moval technology, the existing problems of space-based laser debris removal technology are systematically analyzed.In view of the existing problems, the work and research progress of the Beijing Institute of Spacecraft EnvironmentEngineering in this field are introduced from several aspects, such as dynamic behavior of laser-driven debris, orbittransfer model, ground simulation system, space-based removal system scheme and target selection strategy. The mainresearch methods include laser-driven micro-impulse measurement experiment, surface triangulation three-dimension-al reconstruction calculation method based on laser-material interaction theory, simulation calculation based on orbitaldynamics, etc. It also looks forward to the future research direction in the field of this technology.
文摘Aim: The present study evaluated the magnitude of temperature changes in the tooth during cavitation produced by an Er,Cr:YSGG laser. Methods: The root canal of a single extracted maxillary canine was enlarged to a size 30/.02 file. Four thermocouples were attached to the tooth: one to the surface of the root and three inserted into the canal at 3, 9, and 15 mm from the apical foramen, respectively. The tooth was placed in a plastic container at room temperature around 25°C. The tooth was processed as follows. In the EDTA condition, the tooth was irrigated with 17% EDTA;in the NaOCl condition, the tooth was irrigated with 3% NaOCl;and to analyse the effect of different thicknesses of dentin, the tooth was irrigated with tap water. In all conditions, the irrigants were activated at 2 W for 120 seconds. Results: The mean temperature was 25.2°C to 27.1°C and the temperature ranged from 25.0°C to 29.6°C. The temperature elevation measured during cavitation generated by the laser didnot exceed 5°C. Conclusions: The magnitude of the temperature changes in the root canal and at the surface of the tooth did not exceed 5°C when laser-driven irrigation was used to produce cavitation in the root canal.
