This paper presents a quasi-static implicit generalized interpolation material point method(i GIMP)with B-bar approach for large deformation geotechnical problems.The i GIMP algorithm is an extension of the implicit m...This paper presents a quasi-static implicit generalized interpolation material point method(i GIMP)with B-bar approach for large deformation geotechnical problems.The i GIMP algorithm is an extension of the implicit material point method(iMPM).The global stiffness matrix is formed explicitly and the Newton-Raphson iterative method is used to solve the equilibrium equations.Where possible,the implementation procedure closely follows standard finite element method(FEM)approaches to allow easy conversion of other FEM codes.The generalized interpolation function is assigned to eliminate the inherent cell crossing noise within conventional MPM.For the first time,the B-bar approach is used to overcome volumetric locking in standard GIMP method for near-incompressible non-linear geomechanics.The proposed i GIMP was tested and compared with i MPM and analytical solutions via a 1 D column compression problem.Results highlighted the superiority of the i GIMP approach in reducing stress oscillations,thereby improving computational accuracy.Then,elasto-plastic slope stabilities and rigid footing problems were considered,further illustrating the ability of the proposed method to overcome volumetric locking due to incompressibility.Results showed that the proposed i GIMP with B-bar approach can be used to simulate geotechnical problems with large deformations.展开更多
In this paper, a three dimensional matrix valued rational interpolant (TGMRI) is first constructed by making use of the generalized inverse of matrices. The interpolants are of the Thiele type branched continued fra...In this paper, a three dimensional matrix valued rational interpolant (TGMRI) is first constructed by making use of the generalized inverse of matrices. The interpolants are of the Thiele type branched continued fraction form, with matrix numerator and scalar denominator. Some properties of TGMRI are given. An efficient recursive algorithm is proposed. The results in the paper can be extend to n variable.展开更多
Let f∈C[-1,1]and R. (r≥1 ) be the reneralized Pal iner polation polynomials satisf ying the conditions Rn, where{xk} are the roots of n-th Jacobi polynomial Pn and are the roots of In this paper,we prove that Rn...Let f∈C[-1,1]and R. (r≥1 ) be the reneralized Pal iner polation polynomials satisf ying the conditions Rn, where{xk} are the roots of n-th Jacobi polynomial Pn and are the roots of In this paper,we prove that Rn holds uniformly on [0,1].展开更多
The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed. The mathematical model of the tooth surface of spiral bevel gear is presented. A direct interpolation algor...The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed. The mathematical model of the tooth surface of spiral bevel gear is presented. A direct interpolation algorithm of spiral bevel gear NC machining is proposed, thus establishing the relationship between the motion of the cutter-head center and the rotation of the work gear. The interpolation algorithm is implemented to control the gear cutting on self-developed spiral bevel gear NC cutting machine. An example is given to verify the mathematical model and the interpolation algorithm.展开更多
S.M.Lozinskii proved the exact convergence rate at the zero of Lagrange interpolation polynomials to |x| based on equidistant nodes in [-1,1]. In 2000, M. Rever generalized S.M.Lozinskii's result to |x|α(0 <≤...S.M.Lozinskii proved the exact convergence rate at the zero of Lagrange interpolation polynomials to |x| based on equidistant nodes in [-1,1]. In 2000, M. Rever generalized S.M.Lozinskii's result to |x|α(0 <≤ α≤ 1). In this paper we will present the exact rate of convergence at the point zero for the interpolants of |x|α1(1 < α < 2)..展开更多
It is a classical result of Bernstein that the sequence of Lagrange interpolation polynomials to \x\ at e-qually spaced nodes in [-1.1] diverges everywhere. except at zero and the end-points. In this paper we show tha...It is a classical result of Bernstein that the sequence of Lagrange interpolation polynomials to \x\ at e-qually spaced nodes in [-1.1] diverges everywhere. except at zero and the end-points. In this paper we show that the sequence of Lagrange interpolation polynomials corresponding to the functions which possess better smoothness on equidistant nodes in [-1.1] still diverges every -where in the interval except at zero and the end-points.展开更多
Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the lo...Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the local strain.Mechanical properties of 2-D textile fabric reinforced ceramic matrix composites are predicted by NICM.Microstructures of 2-D woven and braided fabric reinforced composite are modeled by two kinds of RVE scheme.NICM is used to predict the macroscopic mechanical properties.The fill and warp yarns are simulated with cubic B-spline and their undulating forms are approximated by sinusoid.The effect of porosity on the fiber and matrix are considered as a reduction of elastic module.The connection of microstructure parameters and fiber volume fraction is modeled to investigate the reflection on the mechanical properties.The results predicted by NICM are compared with that by the finite element method（FEM）.The comparison shows that NICM is a valid and feasible method for predicting the mechanics properties of 2-D woven and braided fabric reinforced ceramic matrix composites.展开更多
In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This st...In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This study combines the DIE method with the moving Kriging interpolation to present a boundary-type meshfree method, and the corresponding formulae of the MKIBNM are derived. In the present method, the moving Kriging interpolation is applied instead of the traditional moving least-square approximation to overcome Kronecker＇s delta property, then the boundary conditions can be imposed directly and easily. To verify the accuracy and stability of the present formulation, three selected numerical examples are presented to demonstrate the efficiency of MKIBNM numerically.展开更多
It is a classical result of Bernstein that the sequence of Lagrange interpolation polumomials to ｜x｜ at equally spaced nodes in [-1, 1] diverges everywhere, except at zero and the end-points. In the present paper, t...It is a classical result of Bernstein that the sequence of Lagrange interpolation polumomials to ｜x｜ at equally spaced nodes in [-1, 1] diverges everywhere, except at zero and the end-points. In the present paper, toe prove that the sequence of Lagrange interpolation polynomials corresponding to ｜x｜^α （2 〈 α 〈 4） on equidistant nodes in [-1, 1] diverges everywhere, except at zero and the end-points.展开更多
Randomness and fluctuations in wind power output may cause changes in important parameters(e.g.,grid frequency and voltage),which in turn affect the stable operation of a power system.However,owing to external factors...Randomness and fluctuations in wind power output may cause changes in important parameters(e.g.,grid frequency and voltage),which in turn affect the stable operation of a power system.However,owing to external factors(such as weather),there are often various anomalies in wind power data,such as missing numerical values and unreasonable data.This significantly affects the accuracy of wind power generation predictions and operational decisions.Therefore,developing and applying reliable wind power interpolation methods is important for promoting the sustainable development of the wind power industry.In this study,the causes of abnormal data in wind power generation were first analyzed from a practical perspective.Second,an improved complete ensemble empirical mode decomposition with adaptive noise(ICEEMDAN)method with a generative adversarial interpolation network(GAIN)network was proposed to preprocess wind power generation and interpolate missing wind power generation sub-components.Finally,a complete wind power generation time series was reconstructed.Compared to traditional methods,the proposed ICEEMDAN-GAIN combination interpolation model has a higher interpolation accuracy and can effectively reduce the error impact caused by wind power generation sequence fluctuations.展开更多
General interpolation formulae for barycentric interpolation and barycen- tric rational Hermite interpolation are established by introducing multiple parameters, which include many kinds of barycentric interpolation a...General interpolation formulae for barycentric interpolation and barycen- tric rational Hermite interpolation are established by introducing multiple parameters, which include many kinds of barycentric interpolation and barycentric rational Her- mite interpolation. We discussed the interpolation theorem, dual interpolation and special cases. Numerical example is given to show the effectiveness of the method.展开更多
A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(F...A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(FGMEE)structures.By introducing the modified Newmark method,the displacement,electrical potential and magnetic potential of the structures under transient mechanical loading were obtained.Based on G space theory and the weakened weak(W2)formulation,the equations of the multi-physics coupling problems were derived.Using triangular background elements,the free vibration and transient responses of three numerical examples were studied.Results proved that CM-NS-RPIM performed better than the standard FEM by reducing the overly-stiff of structures.Moreover,CM-NS-RPIM could reduce the number of nodes while guaranteeing the accuracy.Besides,triangular elements could be generated automatically even for complex geometries.Therefore,the effectiveness and validity of CM-NS-RPIM were demonstrated,which were valuable for the design of intelligence devices,such as energy harvesters and sensors.展开更多
Boyd^interpolation theorem for quasilinear operators is generalized in this paper,which gives a generalization for both the Marcinkiewicz interpolation theorem and Boyd^interpolation theorem.By using this new interpol...Boyd^interpolation theorem for quasilinear operators is generalized in this paper,which gives a generalization for both the Marcinkiewicz interpolation theorem and Boyd^interpolation theorem.By using this new interpolation theorem,we study the spherical fractional maximal functions and the fractional maximal commutators on rearrangement-invariant quasi-Banach function spaces.In particular,we obtain the mapping properties of the spherical fractional maximal functions and the fractional maximal commutators on generalized Lorentz spaces.展开更多
In this paper we propose a collocation method for solving Lane-Emden type equation which is nonlinear or-dinary differential equation on the semi-infinite domain. This equation is categorized as singular initial value...In this paper we propose a collocation method for solving Lane-Emden type equation which is nonlinear or-dinary differential equation on the semi-infinite domain. This equation is categorized as singular initial value problems. We solve this equation by the generalized Laguerre polynomial collocation method based on Her-mite-Gauss nodes. This method solves the problem on the semi-infinite domain without truncating it to a fi-nite domain and transforming domain of the problem to a finite domain. In addition, this method reduces so-lution of the problem to solution of a system of algebraic equations.展开更多
The following theorem is proved Theorem 1.Let q be a polynomial of degree n(qP_n)with n distinct zeroes lying in the interval[-1,1] and △'_q={-1}∪{τ_i:q'(τ_i)=0,i=1,n-1}∪{1}. If polynomial pP_n satisfies ...The following theorem is proved Theorem 1.Let q be a polynomial of degree n(qP_n)with n distinct zeroes lying in the interval[-1,1] and △'_q={-1}∪{τ_i:q'(τ_i)=0,i=1,n-1}∪{1}. If polynomial pP_n satisfies the inequality then for each k=1,n and any x[-1,1]its k-th derivative satisfies the inequality 丨p^(k)(x)丨≤max{丨q^((k))(x)丨,丨1/k(x^2-1)q^(k+1)(x)+xq^((k))(x)丨}. This estimate leads to the Markov inequality for the higher order derivatives of polynomials if we set q=T_n,where Tn is Chebyshev polynomial least deviated from zero. Some other results are established which gives evidence to the conjecture that under the conditions of Theorem 1 the inequality ‖p^((k))‖≤‖q^(k)‖holds.展开更多
The aim of this survey paper is to propose a new concept ＂generator＂. In fact, generator is a single function that can generate the basis as well as the whole function space. It is a more fundamental concept than ba...The aim of this survey paper is to propose a new concept ＂generator＂. In fact, generator is a single function that can generate the basis as well as the whole function space. It is a more fundamental concept than basis. Various properties of generator are also discussed. Moreover, a special generator named multiquadric function is introduced. Based on the multiquadric generator, the multiquadric quasi-interpolation scheme is constructed, and furthermore, the properties of this kind of quasi-interpolation are discussed to show its better capacity and stability in approximating the high order derivatives.展开更多
This research focused on the three-dimensional(3 D) seepage field simulation of a high concrete-faced rockfill dam(CFRD) under complex hydraulic conditions. A generalized equivalent continuum model of fractured rock m...This research focused on the three-dimensional(3 D) seepage field simulation of a high concrete-faced rockfill dam(CFRD) under complex hydraulic conditions. A generalized equivalent continuum model of fractured rock mass was used for equivalent continuous seepage field analysis based on the improved node virtual flow method. Using a high CFRD as an example, the generalized equivalent continuum range was determined, and a finite element model was established based on the terrain and geological conditions, as well as structural face characteristics of the dam area. The equivalent seepage coefficients of different material zones or positions in the dam foundation were calculated with the Snow model or inverse analysis. Then, the 3 D seepage field in the dam area was calculated under the normal water storage conditions, and the corresponding water head distribution, seepage flow, seepage gradient, and seepage characteristics in the dam area were analyzed. The results show that the generalized equivalent continuum model can effectively simulate overall seepage patterns of the CFRD under complex hydraulic conditions and provide a reference for seepage analysis of similar CFRDs.展开更多
In this paper we present a generalized quantitative version of a result the exact convergence rate at zero of Lagrange interpolation polynomial to spaced nodes in [-1,1] due to M.Revers concerning f（x） = ｜x｜α wit...In this paper we present a generalized quantitative version of a result the exact convergence rate at zero of Lagrange interpolation polynomial to spaced nodes in [-1,1] due to M.Revers concerning f（x） = ｜x｜α with on equally展开更多
This paper shows that the sequence of Lagrange interpolation polynomials corresponding to the rune tion f（z） =｜x｜^α（1〈α〈2） on [-1,1] can diverge everywhere in the interval except at zero and the end-points.
This paper introduces the definition of the Orthogonal Type Node Configuration and discusses the corresponding multivariate Lagrange, Hermite and Birkhoff interpolation problems in high dimensional space R s(s>2). ...This paper introduces the definition of the Orthogonal Type Node Configuration and discusses the corresponding multivariate Lagrange, Hermite and Birkhoff interpolation problems in high dimensional space R s(s>2). This node configuration can be considered to be a kind of extension of the Cross Type Node Configuration , in R 2 to high dimensional spaces. And the Mixed Type Node Configuration in R s(s>2) is also discussed in this paper in an example.展开更多
基金the National Natural Science Foundation of China(Nos.41807223 and 51908175)the Fundamental Research Funds for the Central Universities(No.B210202096)+1 种基金the Natural Science Foundation of Guangdong Province(No.2018A030310346)the Water Conservancy Science and Technology Innovation Project of Guangdong Province(No.2020-11),China。
文摘This paper presents a quasi-static implicit generalized interpolation material point method(i GIMP)with B-bar approach for large deformation geotechnical problems.The i GIMP algorithm is an extension of the implicit material point method(iMPM).The global stiffness matrix is formed explicitly and the Newton-Raphson iterative method is used to solve the equilibrium equations.Where possible,the implementation procedure closely follows standard finite element method(FEM)approaches to allow easy conversion of other FEM codes.The generalized interpolation function is assigned to eliminate the inherent cell crossing noise within conventional MPM.For the first time,the B-bar approach is used to overcome volumetric locking in standard GIMP method for near-incompressible non-linear geomechanics.The proposed i GIMP was tested and compared with i MPM and analytical solutions via a 1 D column compression problem.Results highlighted the superiority of the i GIMP approach in reducing stress oscillations,thereby improving computational accuracy.Then,elasto-plastic slope stabilities and rigid footing problems were considered,further illustrating the ability of the proposed method to overcome volumetric locking due to incompressibility.Results showed that the proposed i GIMP with B-bar approach can be used to simulate geotechnical problems with large deformations.
文摘In this paper, a three dimensional matrix valued rational interpolant (TGMRI) is first constructed by making use of the generalized inverse of matrices. The interpolants are of the Thiele type branched continued fraction form, with matrix numerator and scalar denominator. Some properties of TGMRI are given. An efficient recursive algorithm is proposed. The results in the paper can be extend to n variable.
基金Supported by the Science Foundation of CSBTB the Natural Science Foundatioin of Zhejiang.
文摘Let f∈C[-1,1]and R. (r≥1 ) be the reneralized Pal iner polation polynomials satisf ying the conditions Rn, where{xk} are the roots of n-th Jacobi polynomial Pn and are the roots of In this paper,we prove that Rn holds uniformly on [0,1].
文摘The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed. The mathematical model of the tooth surface of spiral bevel gear is presented. A direct interpolation algorithm of spiral bevel gear NC machining is proposed, thus establishing the relationship between the motion of the cutter-head center and the rotation of the work gear. The interpolation algorithm is implemented to control the gear cutting on self-developed spiral bevel gear NC cutting machine. An example is given to verify the mathematical model and the interpolation algorithm.
文摘S.M.Lozinskii proved the exact convergence rate at the zero of Lagrange interpolation polynomials to |x| based on equidistant nodes in [-1,1]. In 2000, M. Rever generalized S.M.Lozinskii's result to |x|α(0 <≤ α≤ 1). In this paper we will present the exact rate of convergence at the point zero for the interpolants of |x|α1(1 < α < 2)..
文摘It is a classical result of Bernstein that the sequence of Lagrange interpolation polynomials to \x\ at e-qually spaced nodes in [-1.1] diverges everywhere. except at zero and the end-points. In this paper we show that the sequence of Lagrange interpolation polynomials corresponding to the functions which possess better smoothness on equidistant nodes in [-1.1] still diverges every -where in the interval except at zero and the end-points.
基金Supported by the Aviation Science Foundationof China(2009ZB5052)the Specialized Research Foundation for the Doctor Program of Higher Education(20070287039)~~
文摘Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the local strain.Mechanical properties of 2-D textile fabric reinforced ceramic matrix composites are predicted by NICM.Microstructures of 2-D woven and braided fabric reinforced composite are modeled by two kinds of RVE scheme.NICM is used to predict the macroscopic mechanical properties.The fill and warp yarns are simulated with cubic B-spline and their undulating forms are approximated by sinusoid.The effect of porosity on the fiber and matrix are considered as a reduction of elastic module.The connection of microstructure parameters and fiber volume fraction is modeled to investigate the reflection on the mechanical properties.The results predicted by NICM are compared with that by the finite element method（FEM）.The comparison shows that NICM is a valid and feasible method for predicting the mechanics properties of 2-D woven and braided fabric reinforced ceramic matrix composites.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.10902076)the Natural Science Foundation of Shanxi Province of China(Grant No.2007011009)+1 种基金the Scientific Research and Development Program of the Shanxi Higher Education Institutions(Grant No.20091131)the Doctoral Startup Foundation of Taiyuan University of Science and Technology(Grant No.200708)
文摘In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This study combines the DIE method with the moving Kriging interpolation to present a boundary-type meshfree method, and the corresponding formulae of the MKIBNM are derived. In the present method, the moving Kriging interpolation is applied instead of the traditional moving least-square approximation to overcome Kronecker＇s delta property, then the boundary conditions can be imposed directly and easily. To verify the accuracy and stability of the present formulation, three selected numerical examples are presented to demonstrate the efficiency of MKIBNM numerically.
文摘It is a classical result of Bernstein that the sequence of Lagrange interpolation polumomials to ｜x｜ at equally spaced nodes in [-1, 1] diverges everywhere, except at zero and the end-points. In the present paper, toe prove that the sequence of Lagrange interpolation polynomials corresponding to ｜x｜^α （2 〈 α 〈 4） on equidistant nodes in [-1, 1] diverges everywhere, except at zero and the end-points.
基金We gratefully acknowledge the support of National Natural Science Foundation of China(NSFC)(Grant No.51977133&Grant No.U2066209).
文摘Randomness and fluctuations in wind power output may cause changes in important parameters(e.g.,grid frequency and voltage),which in turn affect the stable operation of a power system.However,owing to external factors(such as weather),there are often various anomalies in wind power data,such as missing numerical values and unreasonable data.This significantly affects the accuracy of wind power generation predictions and operational decisions.Therefore,developing and applying reliable wind power interpolation methods is important for promoting the sustainable development of the wind power industry.In this study,the causes of abnormal data in wind power generation were first analyzed from a practical perspective.Second,an improved complete ensemble empirical mode decomposition with adaptive noise(ICEEMDAN)method with a generative adversarial interpolation network(GAIN)network was proposed to preprocess wind power generation and interpolate missing wind power generation sub-components.Finally,a complete wind power generation time series was reconstructed.Compared to traditional methods,the proposed ICEEMDAN-GAIN combination interpolation model has a higher interpolation accuracy and can effectively reduce the error impact caused by wind power generation sequence fluctuations.
基金supported by the grant of Key Scientific Research Foundation of Education Department of Anhui Province, No. KJ2014A210
文摘General interpolation formulae for barycentric interpolation and barycen- tric rational Hermite interpolation are established by introducing multiple parameters, which include many kinds of barycentric interpolation and barycentric rational Her- mite interpolation. We discussed the interpolation theorem, dual interpolation and special cases. Numerical example is given to show the effectiveness of the method.
基金co-supported by the National Key R&D Program of China(Nos.2018YFF01012401-05)the National Natural Science Foundation of China(No.51975243)+2 种基金Jilin Provincial Department of Education(No.JJKH20180084KJ),Chinathe Fundamental Research Funds for the Central Universities and Jilin Provincial Department of Science&Technology Fund Project,China(Nos.20170101043JC and 20180520072JH)Graduate Innovation Fund of Jilin University,China(No.101832018C184).
文摘A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(FGMEE)structures.By introducing the modified Newmark method,the displacement,electrical potential and magnetic potential of the structures under transient mechanical loading were obtained.Based on G space theory and the weakened weak(W2)formulation,the equations of the multi-physics coupling problems were derived.Using triangular background elements,the free vibration and transient responses of three numerical examples were studied.Results proved that CM-NS-RPIM performed better than the standard FEM by reducing the overly-stiff of structures.Moreover,CM-NS-RPIM could reduce the number of nodes while guaranteeing the accuracy.Besides,triangular elements could be generated automatically even for complex geometries.Therefore,the effectiveness and validity of CM-NS-RPIM were demonstrated,which were valuable for the design of intelligence devices,such as energy harvesters and sensors.
文摘Boyd^interpolation theorem for quasilinear operators is generalized in this paper,which gives a generalization for both the Marcinkiewicz interpolation theorem and Boyd^interpolation theorem.By using this new interpolation theorem,we study the spherical fractional maximal functions and the fractional maximal commutators on rearrangement-invariant quasi-Banach function spaces.In particular,we obtain the mapping properties of the spherical fractional maximal functions and the fractional maximal commutators on generalized Lorentz spaces.
文摘In this paper we propose a collocation method for solving Lane-Emden type equation which is nonlinear or-dinary differential equation on the semi-infinite domain. This equation is categorized as singular initial value problems. We solve this equation by the generalized Laguerre polynomial collocation method based on Her-mite-Gauss nodes. This method solves the problem on the semi-infinite domain without truncating it to a fi-nite domain and transforming domain of the problem to a finite domain. In addition, this method reduces so-lution of the problem to solution of a system of algebraic equations.
文摘The following theorem is proved Theorem 1.Let q be a polynomial of degree n(qP_n)with n distinct zeroes lying in the interval[-1,1] and △'_q={-1}∪{τ_i:q'(τ_i)=0,i=1,n-1}∪{1}. If polynomial pP_n satisfies the inequality then for each k=1,n and any x[-1,1]its k-th derivative satisfies the inequality 丨p^(k)(x)丨≤max{丨q^((k))(x)丨,丨1/k(x^2-1)q^(k+1)(x)+xq^((k))(x)丨}. This estimate leads to the Markov inequality for the higher order derivatives of polynomials if we set q=T_n,where Tn is Chebyshev polynomial least deviated from zero. Some other results are established which gives evidence to the conjecture that under the conditions of Theorem 1 the inequality ‖p^((k))‖≤‖q^(k)‖holds.
基金Supported by the 973program-2006CB303102SGST 09DZ 2272900NSFC No.11026089
文摘The aim of this survey paper is to propose a new concept ＂generator＂. In fact, generator is a single function that can generate the basis as well as the whole function space. It is a more fundamental concept than basis. Various properties of generator are also discussed. Moreover, a special generator named multiquadric function is introduced. Based on the multiquadric generator, the multiquadric quasi-interpolation scheme is constructed, and furthermore, the properties of this kind of quasi-interpolation are discussed to show its better capacity and stability in approximating the high order derivatives.
基金supported by the National Natural Science Youth Foundation of China(Grant No.51309101)the Henan Province Major Scientific and Technological Projects(Grant No.172102210372)the Cooperative Project of Production,Teaching and Research in Henan Province(Grant No.18210700031)
文摘This research focused on the three-dimensional(3 D) seepage field simulation of a high concrete-faced rockfill dam(CFRD) under complex hydraulic conditions. A generalized equivalent continuum model of fractured rock mass was used for equivalent continuous seepage field analysis based on the improved node virtual flow method. Using a high CFRD as an example, the generalized equivalent continuum range was determined, and a finite element model was established based on the terrain and geological conditions, as well as structural face characteristics of the dam area. The equivalent seepage coefficients of different material zones or positions in the dam foundation were calculated with the Snow model or inverse analysis. Then, the 3 D seepage field in the dam area was calculated under the normal water storage conditions, and the corresponding water head distribution, seepage flow, seepage gradient, and seepage characteristics in the dam area were analyzed. The results show that the generalized equivalent continuum model can effectively simulate overall seepage patterns of the CFRD under complex hydraulic conditions and provide a reference for seepage analysis of similar CFRDs.
文摘In this paper we present a generalized quantitative version of a result the exact convergence rate at zero of Lagrange interpolation polynomial to spaced nodes in [-1,1] due to M.Revers concerning f（x） = ｜x｜α with on equally
文摘This paper shows that the sequence of Lagrange interpolation polynomials corresponding to the rune tion f（z） =｜x｜^α（1〈α〈2） on [-1,1] can diverge everywhere in the interval except at zero and the end-points.
文摘This paper introduces the definition of the Orthogonal Type Node Configuration and discusses the corresponding multivariate Lagrange, Hermite and Birkhoff interpolation problems in high dimensional space R s(s>2). This node configuration can be considered to be a kind of extension of the Cross Type Node Configuration , in R 2 to high dimensional spaces. And the Mixed Type Node Configuration in R s(s>2) is also discussed in this paper in an example.
