Understanding the factors triggering slope failure is essential to ensure the safety of buildings and transportation infrastructure on slopes. Specifically,the failure of stabilizing piles due to groundwater migration...Understanding the factors triggering slope failure is essential to ensure the safety of buildings and transportation infrastructure on slopes. Specifically,the failure of stabilizing piles due to groundwater migration and freeze–thaw(FT) cycles is a significant factor causing slope failure. This study aims to investigate the transmedia seepage characteristics at slope–concrete stabilizing pile interface systems by using silty clay and concrete with varying microstructure characteristics under FT cycles. To this end, a self-developed indoor test device for transmedia water migration, combined with a macro-meso-micro multiscale testing approach, was used to analyze the laws and mechanisms of transmedia seepage at the interface systems. The effect of the medium's microstructure characteristics on the transmedia seepage behavior at the interface systems under FT cycles was also assessed. Results indicated that the transmedia water migration exhibited particularity due to the migration of soil particles and the low permeability characteristics of concrete. The water content in the media increased significantly within the range of 1/3–2/3 of the height from the interface for soil and within 5 mm from the interface for concrete.FT cycles promoted the increase and penetration of cracks within the medium, enhancing the permeability of the slope-concrete stabilizing pile interface systems.With the increase in FT cycles, the porosity inside the medium first decreased and then increased, and the porosity reached the minimum after 25 FT cycles and the maximum after 75 FT cycles, and the water content of the medium after water migration was positively correlated with the porosity. FT cycles also significantly influenced the temporal variation characteristics of soil moisture and the migration path of water in concrete. The study results could serve as a reference for related research on slope stability assessment.展开更多
Gap acceptance theory is broadly used for evaluating unsignalized intersections in developed coun tries. Intersections with no specific priority to any move ment, known as uncontrolled intersections, are common in Ind...Gap acceptance theory is broadly used for evaluating unsignalized intersections in developed coun tries. Intersections with no specific priority to any move ment, known as uncontrolled intersections, are common in India. Limited priority is observed at a few intersections, where priorities are perceived by drivers based on geom etry, traffic volume, and speed on the approaches of intersection. Analyzing such intersections is complex because the overall traffic behavior is the result of drivers, vehicles, and traffic flow characteristics. Fuzzy theory has been widely used to analyze similar situations. This paper describes the application of adaptive neurofuzzy interface system （ANFIS） to the modeling of gap acceptance behavior of rightturning vehicles at limited priority Tintersections （in India, vehicles are driven on the left side of a road）. Field data are collected using video cameras at four Tintersections having limited priority. The data extracted include gap/lag, subject vehicle type, conflicting vehicle type, and driver＇s decision （accepted/rejected）. ANFIS models are developed by using 80 % of the extracted data （total data observations for major road right turning vehicles are 722 and 1,066 for minor road right turning vehicles） and remaining are used for model vali dation. Four different combinations of input variables are considered for major and minor road right turnings sepa rately. Correct prediction by ANFIS models ranges from 75.17 % to 82.16 % for major road right turning and 87.20 % to 88.62 % for minor road right turning. Themodels developed in this paper can be used in the dynamic estimation of gap acceptance in traffic simulation models.展开更多
Bio-based human computer interface (HCI) has attracted more and more attention of researches all over the world in recent years. In this paper, a HCI system which based on electrooculogram (EOG) is proposed. It transf...Bio-based human computer interface (HCI) has attracted more and more attention of researches all over the world in recent years. In this paper, a HCI system which based on electrooculogram (EOG) is proposed. It transforms electrical po-tentials recorded by horizontal and vertical EOG into a computer in order to control external equipment. The system consists of EOG acqui-sition unit, EOG pattern recognition part and control command output unit. Three plane elec-trodes are employed to detect EOG signals, which contain the information related to the eye blinking and vertical (or horizontal) eye move-ments referred to pre-designed command table. An online signal processing algorithm is de-signed to get the command information con-tained in EOG signals, and these commands could be used to control the computer or other instruments. Based on this HCI system, the remote control experiments driven by EOG are realized.展开更多
A brain-computer interface(BCI)real-time system based on motor imagery translates the user's motor intention into a real-time control signal for peripheral equipments.A key problem to be solved for practical appli...A brain-computer interface(BCI)real-time system based on motor imagery translates the user's motor intention into a real-time control signal for peripheral equipments.A key problem to be solved for practical applications is real-time data collection and processing.In this paper,a real-time BCI system is implemented on computer with electroencephalogram amplifier.In our implementation,the on-line voting method is adopted for feedback control strategy,and the voting results are used to control the cursor horizontal movement.Three subjects take part in the experiment.The results indicate that the best accuracy is 90%.展开更多
Brain–computer interface (BCI) systems, such as the P300 speller, enable patients to express intentions withoutnecessitating extensive training.However, the complexity of operational instructions and the slow pace of...Brain–computer interface (BCI) systems, such as the P300 speller, enable patients to express intentions withoutnecessitating extensive training.However, the complexity of operational instructions and the slow pace of characterspelling pose challenges for some patients. In this paper, an image segmentation P300 selector based on YOLOv7-mask and DeepSORT is proposed. The proposed system utilizes a camera to capture real-world objects forclassification and tracking. By applying predefined stimulation rules and object-specificmasks, the proposed systemtriggers stimuli associated with the objects displayed on the screen, inducing the generation of P300 signals in thepatient’s brain. Its video processing mechanism enables the system to identify the target the patient is focusing oneven if the object is partially obscured, overlapped, moving, or changing in number. The system alters the target’scolor display, thereby conveying the patient’s intentions to caregivers. The data analysis revealed that the selfrecognitionaccuracy of the subjects using this method was between 92% and 100%, and the cross-subject P300recognition precision was 81.9%–92.1%. This means that simple instructions such as “Do not worry, just focuson what you desire” effectively discerned the patient’s intentions using the Image Segmentation-P300 selector. Thisapproach provides cost-effective support and allows patients with communication difficulties to easily express theirneeds.展开更多
In this paper, rough set theory is introduced into the interface multi-agent system （MAS） for industrial supervisory system. Taking advantages of rough set in data mining, a cooperation model for MAS is built. Rules...In this paper, rough set theory is introduced into the interface multi-agent system （MAS） for industrial supervisory system. Taking advantages of rough set in data mining, a cooperation model for MAS is built. Rules for avoiding cooperation conflict are deduced. An optimization algorithm is used to enhance security and real time attributes of the system. An application based on the proposed algorithm and rules are given.展开更多
Rechargeable alkali metal-sulfur(M-S)batteries,including Li/Na/K-S chemistries,have the potential to utilize abundant and low-cost sulfur cathodes yet offer high theoretical energy densities.However,their practical el...Rechargeable alkali metal-sulfur(M-S)batteries,including Li/Na/K-S chemistries,have the potential to utilize abundant and low-cost sulfur cathodes yet offer high theoretical energy densities.However,their practical electrochemical performance is fundamentally limited by the polysulfide shuttle effect.This challenge is particularly exacerbated in Na-S and K-S systems owing to larger metal-ion radii,weaker solvation energies,slower redox kinetics,and greater electrolyte-electrode incompatibilities compared to Li-S batteries.This review presents a comparative analysis of interface engineering strategies designed to suppress the shuttle effect across these three systems.Following a summary of sulfur cathode properties and reaction mechanisms,we systematically examine the origins of polysulfide shuttling.Our analysis progresses from functional separator design and interlayer enhancements to the implementation of solid-state electrolytes for root-cause inhibition.By evaluating interface engineering research specific to Na-S and K-S batteries,we elucidate both shared principles and unique challenges inherent to alkali M-S systems.Finally,we propose multifaceted solutions to achieve shuttlefree operation and enhance overall battery performance,thereby establishing a foundation for future advancements.展开更多
Brain-computer interface(BCI)is an advanced technology that establishes a direct connection between the brain and external devices,enabling high-speed and real-time information exchange.In BCI systems,electrodes are k...Brain-computer interface(BCI)is an advanced technology that establishes a direct connection between the brain and external devices,enabling high-speed and real-time information exchange.In BCI systems,electrodes are key interface devices responsible for transmitting signals between the brain and external devices,including recording electrophysiological signals and electrically stimulating nerves.Early BCI electrodes were mainly composed of rigid materials.The mismatch in Young's modulus between rigid electrodes and soft biological tissue can lead to rejection reactions within the biological system,resulting in electrode failure.Furthermore,rigid electrodes are prone to damaging biological tissues during implantation and use.Recently,flexible electrodes have garnered attention in the field of brain science research due to their better adaptability to the softness and curvature of the brain.The design of flexible electrodes can effectively reduce mechanical damage to neural tissue and improve the accuracy and stability of signal transmission,providing new tools and methods for exploring brain function mechanisms and developing novel neural interface technologies.Here,we review the research advancements in neural electrodes for BCI systems.This paper emphasizes the importance of neural electrodes in BCI systems,discusses the limitations of traditional rigid neural electrodes,and introduces various types of flexible neural electrodes in detail.In addition,we also explore practical application scenarios and future development trends of BCI electrode technology,aiming to offer valuable insights for enhancing the performance and user experience of BCI systems.展开更多
The detection and cultivation of circulating tumor cells(CTCs)play a crucial role in monitoring tumor recurrence,metastasis,early disease diagnosis,and assessing the effectiveness of drug treatments.This study specifi...The detection and cultivation of circulating tumor cells(CTCs)play a crucial role in monitoring tumor recurrence,metastasis,early disease diagnosis,and assessing the effectiveness of drug treatments.This study specifically focused on investigating human breast cancer cells MCF-7 by utilizing framework nucleic acids(FNAs)as bio-probe scaffold in conjunction with fishbone structures and three-dimensional(3D)microcavity structures within microchannels.These components collectively formed an integrated nano-micro interface system designed for a comprehensive examination of CTC detection and cell culture.The study involved the assessment and comparison of rigid 3D FNAs with distinct side lengths of 7,13,and 26 bases.This approach not only allowed for precise regulation of the DNA biosensor interface through the manipulation of probe spacing,facilitating optimal probe-cell interactions within the microfluidic channel.Consequently,this approach significantly enhances capture efficiency and lowers the CTC detection limit to 5 cells/mL.Moreover,this research successfully observed cell proliferation and individual cell biological behavior within the 3D microcavity structure.The findings indicated that the overall cell population's proliferation was like that in static culture conditions.Although the proliferation cycle of individual cells was notably extended,cell mobility within the microcavity demonstrated their robust biological activity.These significant outcomes not only offer a practical approach for early tumor detection but also provide a valuable pathway for comprehending mechanisms of tumor development and advancement and guiding personalized treatment strategies effectively.展开更多
BACKGROUND Brain-computer interface(BCI)technology is rapidly advancing in psychiatry.Informed consent competency(ICC)assessment among psychiatric patients is a pivotal concern in clinical research.AIM To analyze the ...BACKGROUND Brain-computer interface(BCI)technology is rapidly advancing in psychiatry.Informed consent competency(ICC)assessment among psychiatric patients is a pivotal concern in clinical research.AIM To analyze the assessment of ICC and form a framework with multi-dimensional elements involved in ICC of BCI clinical research among psychiatric disorders.METHODS A systematic review of studies regarding ICC assessments of BCI clinical research in patients with six kinds of psychiatric disorders was conducted.A systematic literature search was performed using PubMed,ScienceDirect,and Web of Science.Peer-reviewed articles and full-text studies were included in the analysis.There were no date restrictions,and all studies published up to February 27,2025,were included.RESULTS A total of 103 studies were selected for this review.Fifty-eight studies included ICC factors,and forty-five were classified in ICC related ethical issues of BCI research in six kinds of psychiatric disorders.Executive function impairment is widely recognized as the most significant factor impacting ICC,and processing speed deficits are observed in schizophrenia,mood disorders,and Alzheimer’s disease.Memory dysfunction,particularly episodic and working memory,contributes to compromised ICC.Five core ethical issues in BCI research should be addressed:BCI specificity,vulnerability,autonomy,dynamic ICC,comprehensiveness,and uncertainty.CONCLUSION A Five-Dimensional evaluative framework,including clinical,ethical,sociocultural,legal,and procedural dimensions,is constructed and proposed for future ICC research in BCI clinical research involving psychiatric disorders.展开更多
This study investigates the shear mechanical responses and debonding failure mechanisms of anchoring systems comprising three anisotropic media and two anisotropic interfaces under controlled boundary conditions of co...This study investigates the shear mechanical responses and debonding failure mechanisms of anchoring systems comprising three anisotropic media and two anisotropic interfaces under controlled boundary conditions of constant normal load(F_(s)),constant normal stiffness(K),and shear rate(v).A systematic analysis of shear mechanical properties,the evolution of maximum principal strain field,and damage characteristics along shear failure surface is presented.Results from direct shear tests demonstrate that initial shear slip diminishes with increasing F_(s)and K,attributed to the normal constraint strengthening effect,while an increase in v enhances initial shear slip due to attenuated deformation coordination and stress transfer.As F_(s)increases from 7.5 to 120 kN,K from 0 to 12 MPa/mm,and v from 0.1 to 2 mm/min,the peak shear load increases by 210.32%and 80.16%with rising F_(s)and K,respectively,while decreases by 38.57%with increasing v.Correspondingly,the shear modulus exhibits,respectively,a 135.29%and 177.06%increase with rising F_(s)and K,and a 37.03%decrease with larger v.Initial shear dilation is identified as marking the formation of shear failure surface along anisotropic interfaces,resulting from the combined shear actions at the resin bolt interface,where resin undergoes shear by bolt surface protrusions,and the resin-rock interface,where mutual shear occurs between resin and rock.With increasing F_(s)and K and decreasing v,the location of the shear failure surface shifts from the resin-rock interface to the resin-bolt interface,accompanied by a transition in failure mode from tensile rupture of resin to shear off at the resin surface.展开更多
Photoelectrochemical(PEC)water splitting is an effective approach to directly convert solar energy into clean hydrogen fuel.As a visible-light-responsive p-type semiconductor,CuBi_(2)O_(4)possesses a suitable bandgap ...Photoelectrochemical(PEC)water splitting is an effective approach to directly convert solar energy into clean hydrogen fuel.As a visible-light-responsive p-type semiconductor,CuBi_(2)O_(4)possesses a suitable bandgap and good stability.However,its performance is inhibited by high interfacial resistance and severe charge carrier recombination.In this study,a CuO interlayer was introduced between fluorine-doped tin oxide(FTO)and CuBi_(2)O_(4)to construct CuO/CuBi_(2)O_(4)photocathodes,aiming to improve interfacial charge transfer.The results showed that CuO/CuBi_(2)O_(4)-200 exhibited a photocurrent density of−1.71 mA/cm^(2)at 0 V vs.RHE,which was more than 3.5 times higher than that of bare CuBi_(2)O_(4).The incident photon-to-current efficiency(IPCE)at 365 nm was enhanced to~13%and the maximum applied bias photon-to-current efficiency(ABPE)reached 0.17%.Water splitting experiments revealed a hydrogen yield of 2.05μmol/cm^(2),significantly surpassing that of the unmodified photoelectrode.The enhanced PEC performance indicated that the CuO layer established a favorable band alignment,promoted hole transport toward the FTO substrate and effectively suppressed interfacial carrier recombination.This work demonstrated a simple and efficient interfacial engineering strategy,offering new insights and guidance for the design and development of high-performance semiconductor-based PEC photoelectrodes.展开更多
Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography...Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography and microelectrode arrays.The challenges of these mentioned approaches are characterized by the bandwidth of the spatiotemporal resolution,which in turn is essential for large-area neuron recordings(Abiri et al.,2019).展开更多
In view of the frequent deterioration of molten steel quality during the tundish filling process,the slag-steel-air interface behavior in a tundish,including liquid level fluctuation,slag eyes,slag entrapment and air ...In view of the frequent deterioration of molten steel quality during the tundish filling process,the slag-steel-air interface behavior in a tundish,including liquid level fluctuation,slag eyes,slag entrapment and air suction during the steady-state casting and filling process,was comparatively studied through physical modeling and mathematical simulation methods.During the filling process,the liquid surface forms a large-size slag eye under the impact of molten steel from a ladle shroud,which simultaneously results in a violent fluctuation of liquid level.Concurrently,the liquid flow entrains the air phase and the cover slag into the tundish impact zone,resulting in slag entrapment and air suction.At filling flow rates of 1.5Q,2.0Q,and 2.5Q(Q is the flow rate under steady-state casting),the amount of slag entrapped is 8.39×10^(-5),9.65×10^(-5),and 12.7×10^(-5)m^(3),respectively,while the volume of air aspirated is 0.84×10^(-4),1.47×10^(-4),and 2.01×10^(-4)m^(3),indicating that slag entrapment and air suction intensify with an increase in tundish filling flow rate.Flow field characterization identifies eddy currents in the impact zone as the primary driver of the above phenomena.Proper filling process parameters were proposed to improve the steel quality during the tundish filling.展开更多
With the growing global energy demand and the pressing need for a clean energy transition,supercapacitors(SCs)have demonstrated significant application potential in electric vehicles,wearable electronics,and renewable...With the growing global energy demand and the pressing need for a clean energy transition,supercapacitors(SCs)have demonstrated significant application potential in electric vehicles,wearable electronics,and renewable energy storage systems owing to their rapid charge-discharge capability,exceptional power density,and prolonged cycle life.The improvement of their overall performance fundamentally depends on the synergistic design of electrode materials and electrolyte systems,as well as the precise regulation of the electrode-electrolyte interface.This review focuses on the key components of supercapacitors,systematically reviewing the design strategies of high-performance electrode materials,outlining recent advances in novel electrolyte systems,and comprehensively discussing the critical roles of interfacial reinforcement and optimization in enhancing device energy density,power performance,and cycling stability.Furthermore,interfacial engineering strategies and innovations in device architecture are proposed to address interfacial degradation in flexible SCs under mechanical stress.Finally,key future research directions are highlighted,including the development of high-voltage and wide-temperature-range electrolyte systems and the integrated advancement of multiscale in situ characterization techniques and theoretical modeling.This review aims to provide theoretical guidance and innovative strategies for material design,contributing toward the realization of next-generation supercapacitors with enhanced energy density and reliability.展开更多
Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread applica...Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread application.In this study,hemin was employed as a multi-functional artificial interface for the first time to inhibit the disordered growth of zinc dendrites and mitigate side reactions.Theoretical calculations indicate that hemin is preferentially adsorbed onto the zinc anode,thus blocking the interaction between the active zinc anode and electrolyte.Compared with zinc foil,the Hemin@Zn anode demonstrates enhanced corrosion resistance,a decrease in hydrogen evolution,and more orderly deposition of zinc.As expected,the symmetric cell with Hemin@Zn anode can sustain up to 4000 h at 0.2 mA/cm^(2),0.2 mAh/cm^(2).Asymmetric Zn//Cu cells exhibit an average coulombic efficiency exceeding 99.72 % during 500 cycles.Moreover,the full cell Hemin@Zn//NH_(4)V_(4)O_(10) delivers a superior capacity up to 367 m Ah/g and the discharge capacity retention reaches 124 mAh/g after 1200 cycles even at a current density of 5 A/g.This work provides a simple and effective method for constructing a robust artificial interface to promote the application of long-life AZIBs.展开更多
Preferential magnesium(Mg)electrodeposition on separators is a ubiquitous yet poorly understood phenomenon in rechargeable Mg-metal batteries,posing a fundamental challenge to their development.In this work,the synerg...Preferential magnesium(Mg)electrodeposition on separators is a ubiquitous yet poorly understood phenomenon in rechargeable Mg-metal batteries,posing a fundamental challenge to their development.In this work,the synergy effects of interface-accelerating desolvation and spatial confinement have been demonstrated as the essential causation of this counterintuitive experimental phenomenon.At the molecular level,the imide ring(-CO-NR-CO-,in which R represents the phenyl)groups in an artificially introduced polyimide(PI)interlayer facilitate the strong electrostatic affinity towards Mg^(2+),which accelerates the desolvation process for Mg^(2+)solvation structures at the inner Helmholtz plane.At the nucleation scale,the wedge-like concave geometry formed at the PI/current collector interface provides energetically favorable sites for Mg nucleation.This unique architecture reduces the critical nucleus size,thereby significantly lowering nucleation energy barriers.As a result,the satisfactory Coulombic efficiency for Mg plating/stripping(98.22%)and cycle lifespan(1200 cycles,above 100 days)have been achieved,outperforming most of the previous results.This work pioneers a molecular-level understanding of separator-directed Mg deposition and resolves a long-standing confusion in Mg-metal batteries.展开更多
The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerge...The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerged as a promising solution for effectively degrading refractory organic pollutants in water under light conditions.This review delves into the advancements made in the field,focusing on strategies to enhance the generation of active species by modulating the micro-interface of the photoanode.Strategies,such as morphological control,element doping,introduction of surface oxygen vacancies,and construction of heterostructures,significantly improve the separation efficiency of photogenerated charges and the generation of active species,thereby boosting the efficiency of photoelectrocatalytic performance.Furthermore,the review explores the potential applications of photoelectrocatalytic technology in organic pollutant degradation in solutions.It also outlines the current challenges and future development directions.Despite its remarkable laboratory success,practical implementation of photoelectrocatalytic technology encounters obstacles related to stability,cost-effectiveness,and operational efficiency.Future investigations need to focus on optimizing the performance of photoelectrocatalytic materials and exploring strategies for upscaling their application in real water treatment scenarios.展开更多
Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction...Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.展开更多
基金financially supported by Jilin Provincial Natural Science Foundation (No.20220101164JC)。
文摘Understanding the factors triggering slope failure is essential to ensure the safety of buildings and transportation infrastructure on slopes. Specifically,the failure of stabilizing piles due to groundwater migration and freeze–thaw(FT) cycles is a significant factor causing slope failure. This study aims to investigate the transmedia seepage characteristics at slope–concrete stabilizing pile interface systems by using silty clay and concrete with varying microstructure characteristics under FT cycles. To this end, a self-developed indoor test device for transmedia water migration, combined with a macro-meso-micro multiscale testing approach, was used to analyze the laws and mechanisms of transmedia seepage at the interface systems. The effect of the medium's microstructure characteristics on the transmedia seepage behavior at the interface systems under FT cycles was also assessed. Results indicated that the transmedia water migration exhibited particularity due to the migration of soil particles and the low permeability characteristics of concrete. The water content in the media increased significantly within the range of 1/3–2/3 of the height from the interface for soil and within 5 mm from the interface for concrete.FT cycles promoted the increase and penetration of cracks within the medium, enhancing the permeability of the slope-concrete stabilizing pile interface systems.With the increase in FT cycles, the porosity inside the medium first decreased and then increased, and the porosity reached the minimum after 25 FT cycles and the maximum after 75 FT cycles, and the water content of the medium after water migration was positively correlated with the porosity. FT cycles also significantly influenced the temporal variation characteristics of soil moisture and the migration path of water in concrete. The study results could serve as a reference for related research on slope stability assessment.
基金partially funded by Department of Science and Technology (DST), Govt. of Indiaproject SR/ FTP/ETA-61/2010
文摘Gap acceptance theory is broadly used for evaluating unsignalized intersections in developed coun tries. Intersections with no specific priority to any move ment, known as uncontrolled intersections, are common in India. Limited priority is observed at a few intersections, where priorities are perceived by drivers based on geom etry, traffic volume, and speed on the approaches of intersection. Analyzing such intersections is complex because the overall traffic behavior is the result of drivers, vehicles, and traffic flow characteristics. Fuzzy theory has been widely used to analyze similar situations. This paper describes the application of adaptive neurofuzzy interface system （ANFIS） to the modeling of gap acceptance behavior of rightturning vehicles at limited priority Tintersections （in India, vehicles are driven on the left side of a road）. Field data are collected using video cameras at four Tintersections having limited priority. The data extracted include gap/lag, subject vehicle type, conflicting vehicle type, and driver＇s decision （accepted/rejected）. ANFIS models are developed by using 80 % of the extracted data （total data observations for major road right turning vehicles are 722 and 1,066 for minor road right turning vehicles） and remaining are used for model vali dation. Four different combinations of input variables are considered for major and minor road right turnings sepa rately. Correct prediction by ANFIS models ranges from 75.17 % to 82.16 % for major road right turning and 87.20 % to 88.62 % for minor road right turning. Themodels developed in this paper can be used in the dynamic estimation of gap acceptance in traffic simulation models.
文摘Bio-based human computer interface (HCI) has attracted more and more attention of researches all over the world in recent years. In this paper, a HCI system which based on electrooculogram (EOG) is proposed. It transforms electrical po-tentials recorded by horizontal and vertical EOG into a computer in order to control external equipment. The system consists of EOG acqui-sition unit, EOG pattern recognition part and control command output unit. Three plane elec-trodes are employed to detect EOG signals, which contain the information related to the eye blinking and vertical (or horizontal) eye move-ments referred to pre-designed command table. An online signal processing algorithm is de-signed to get the command information con-tained in EOG signals, and these commands could be used to control the computer or other instruments. Based on this HCI system, the remote control experiments driven by EOG are realized.
基金supported by the National Natural Science Foundation of China under Grant No.60571019UESTC Youth Foundation under Grant No.L08010901JX0772 for support.
文摘A brain-computer interface(BCI)real-time system based on motor imagery translates the user's motor intention into a real-time control signal for peripheral equipments.A key problem to be solved for practical applications is real-time data collection and processing.In this paper,a real-time BCI system is implemented on computer with electroencephalogram amplifier.In our implementation,the on-line voting method is adopted for feedback control strategy,and the voting results are used to control the cursor horizontal movement.Three subjects take part in the experiment.The results indicate that the best accuracy is 90%.
文摘Brain–computer interface (BCI) systems, such as the P300 speller, enable patients to express intentions withoutnecessitating extensive training.However, the complexity of operational instructions and the slow pace of characterspelling pose challenges for some patients. In this paper, an image segmentation P300 selector based on YOLOv7-mask and DeepSORT is proposed. The proposed system utilizes a camera to capture real-world objects forclassification and tracking. By applying predefined stimulation rules and object-specificmasks, the proposed systemtriggers stimuli associated with the objects displayed on the screen, inducing the generation of P300 signals in thepatient’s brain. Its video processing mechanism enables the system to identify the target the patient is focusing oneven if the object is partially obscured, overlapped, moving, or changing in number. The system alters the target’scolor display, thereby conveying the patient’s intentions to caregivers. The data analysis revealed that the selfrecognitionaccuracy of the subjects using this method was between 92% and 100%, and the cross-subject P300recognition precision was 81.9%–92.1%. This means that simple instructions such as “Do not worry, just focuson what you desire” effectively discerned the patient’s intentions using the Image Segmentation-P300 selector. Thisapproach provides cost-effective support and allows patients with communication difficulties to easily express theirneeds.
基金Project supported by Science Foundation of Shanghai MunicipalCommission of Science and Technology (Grant Nos .025111052 ,04JC14038)
文摘In this paper, rough set theory is introduced into the interface multi-agent system （MAS） for industrial supervisory system. Taking advantages of rough set in data mining, a cooperation model for MAS is built. Rules for avoiding cooperation conflict are deduced. An optimization algorithm is used to enhance security and real time attributes of the system. An application based on the proposed algorithm and rules are given.
基金supported by the National Natural Science Foundation of China(52371131)the 10th Youth Talent Lifting Project of the China Association for Science and Technology.
文摘Rechargeable alkali metal-sulfur(M-S)batteries,including Li/Na/K-S chemistries,have the potential to utilize abundant and low-cost sulfur cathodes yet offer high theoretical energy densities.However,their practical electrochemical performance is fundamentally limited by the polysulfide shuttle effect.This challenge is particularly exacerbated in Na-S and K-S systems owing to larger metal-ion radii,weaker solvation energies,slower redox kinetics,and greater electrolyte-electrode incompatibilities compared to Li-S batteries.This review presents a comparative analysis of interface engineering strategies designed to suppress the shuttle effect across these three systems.Following a summary of sulfur cathode properties and reaction mechanisms,we systematically examine the origins of polysulfide shuttling.Our analysis progresses from functional separator design and interlayer enhancements to the implementation of solid-state electrolytes for root-cause inhibition.By evaluating interface engineering research specific to Na-S and K-S batteries,we elucidate both shared principles and unique challenges inherent to alkali M-S systems.Finally,we propose multifaceted solutions to achieve shuttlefree operation and enhance overall battery performance,thereby establishing a foundation for future advancements.
基金National Natural Science Foundation of China,Grant/Award Numbers:52173237,52473255:Fundamental Research Funds for the Central Universities,Grant/Award Numbers:HIT.NSRIF 202315,HIT.OCEF.2022018Natural Science Foundation of Heilongjiang Province,Grant/Award Numbers:LH2021B009,LH2022E051+1 种基金Interdisciplinary Research Foundation of HIT,Grant/Award Number:IR2021207Open Project Program of Key Laboratory for Photonic and Electric Bandgap Materials,Grant/Award Number:PEBM202107。
文摘Brain-computer interface(BCI)is an advanced technology that establishes a direct connection between the brain and external devices,enabling high-speed and real-time information exchange.In BCI systems,electrodes are key interface devices responsible for transmitting signals between the brain and external devices,including recording electrophysiological signals and electrically stimulating nerves.Early BCI electrodes were mainly composed of rigid materials.The mismatch in Young's modulus between rigid electrodes and soft biological tissue can lead to rejection reactions within the biological system,resulting in electrode failure.Furthermore,rigid electrodes are prone to damaging biological tissues during implantation and use.Recently,flexible electrodes have garnered attention in the field of brain science research due to their better adaptability to the softness and curvature of the brain.The design of flexible electrodes can effectively reduce mechanical damage to neural tissue and improve the accuracy and stability of signal transmission,providing new tools and methods for exploring brain function mechanisms and developing novel neural interface technologies.Here,we review the research advancements in neural electrodes for BCI systems.This paper emphasizes the importance of neural electrodes in BCI systems,discusses the limitations of traditional rigid neural electrodes,and introduces various types of flexible neural electrodes in detail.In addition,we also explore practical application scenarios and future development trends of BCI electrode technology,aiming to offer valuable insights for enhancing the performance and user experience of BCI systems.
基金supported by the Key Laboratory of Bioanalysis and Metrology for State Market Regulation(No.KLSMR2022-01)the National Natural Science Foundation of China(No.21775102)and the Natural Science Foundation of Shanghai Municipal(No.20ZR1424100).
文摘The detection and cultivation of circulating tumor cells(CTCs)play a crucial role in monitoring tumor recurrence,metastasis,early disease diagnosis,and assessing the effectiveness of drug treatments.This study specifically focused on investigating human breast cancer cells MCF-7 by utilizing framework nucleic acids(FNAs)as bio-probe scaffold in conjunction with fishbone structures and three-dimensional(3D)microcavity structures within microchannels.These components collectively formed an integrated nano-micro interface system designed for a comprehensive examination of CTC detection and cell culture.The study involved the assessment and comparison of rigid 3D FNAs with distinct side lengths of 7,13,and 26 bases.This approach not only allowed for precise regulation of the DNA biosensor interface through the manipulation of probe spacing,facilitating optimal probe-cell interactions within the microfluidic channel.Consequently,this approach significantly enhances capture efficiency and lowers the CTC detection limit to 5 cells/mL.Moreover,this research successfully observed cell proliferation and individual cell biological behavior within the 3D microcavity structure.The findings indicated that the overall cell population's proliferation was like that in static culture conditions.Although the proliferation cycle of individual cells was notably extended,cell mobility within the microcavity demonstrated their robust biological activity.These significant outcomes not only offer a practical approach for early tumor detection but also provide a valuable pathway for comprehending mechanisms of tumor development and advancement and guiding personalized treatment strategies effectively.
基金Supported by the Ministry of Science and Technology of the People's Republic of China(2021ZD0201900)Project 5,No.2021ZD0201905Capital’s Funds for Health Improvement and Research,No.CFH 2022-2-4115.
文摘BACKGROUND Brain-computer interface(BCI)technology is rapidly advancing in psychiatry.Informed consent competency(ICC)assessment among psychiatric patients is a pivotal concern in clinical research.AIM To analyze the assessment of ICC and form a framework with multi-dimensional elements involved in ICC of BCI clinical research among psychiatric disorders.METHODS A systematic review of studies regarding ICC assessments of BCI clinical research in patients with six kinds of psychiatric disorders was conducted.A systematic literature search was performed using PubMed,ScienceDirect,and Web of Science.Peer-reviewed articles and full-text studies were included in the analysis.There were no date restrictions,and all studies published up to February 27,2025,were included.RESULTS A total of 103 studies were selected for this review.Fifty-eight studies included ICC factors,and forty-five were classified in ICC related ethical issues of BCI research in six kinds of psychiatric disorders.Executive function impairment is widely recognized as the most significant factor impacting ICC,and processing speed deficits are observed in schizophrenia,mood disorders,and Alzheimer’s disease.Memory dysfunction,particularly episodic and working memory,contributes to compromised ICC.Five core ethical issues in BCI research should be addressed:BCI specificity,vulnerability,autonomy,dynamic ICC,comprehensiveness,and uncertainty.CONCLUSION A Five-Dimensional evaluative framework,including clinical,ethical,sociocultural,legal,and procedural dimensions,is constructed and proposed for future ICC research in BCI clinical research involving psychiatric disorders.
基金Projects(52174092,42472338,51904290)supported by the National Natural Science Foundation of ChinaProject(BK20220157)supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(2022YCPY0202)supported by the Fundamental Research Funds for the Central Universities,China。
文摘This study investigates the shear mechanical responses and debonding failure mechanisms of anchoring systems comprising three anisotropic media and two anisotropic interfaces under controlled boundary conditions of constant normal load(F_(s)),constant normal stiffness(K),and shear rate(v).A systematic analysis of shear mechanical properties,the evolution of maximum principal strain field,and damage characteristics along shear failure surface is presented.Results from direct shear tests demonstrate that initial shear slip diminishes with increasing F_(s)and K,attributed to the normal constraint strengthening effect,while an increase in v enhances initial shear slip due to attenuated deformation coordination and stress transfer.As F_(s)increases from 7.5 to 120 kN,K from 0 to 12 MPa/mm,and v from 0.1 to 2 mm/min,the peak shear load increases by 210.32%and 80.16%with rising F_(s)and K,respectively,while decreases by 38.57%with increasing v.Correspondingly,the shear modulus exhibits,respectively,a 135.29%and 177.06%increase with rising F_(s)and K,and a 37.03%decrease with larger v.Initial shear dilation is identified as marking the formation of shear failure surface along anisotropic interfaces,resulting from the combined shear actions at the resin bolt interface,where resin undergoes shear by bolt surface protrusions,and the resin-rock interface,where mutual shear occurs between resin and rock.With increasing F_(s)and K and decreasing v,the location of the shear failure surface shifts from the resin-rock interface to the resin-bolt interface,accompanied by a transition in failure mode from tensile rupture of resin to shear off at the resin surface.
基金Supported by Educational Department(JYTMS20230310)Natural Science Foundation of Liaoning Province(2024-MS-215)。
文摘Photoelectrochemical(PEC)water splitting is an effective approach to directly convert solar energy into clean hydrogen fuel.As a visible-light-responsive p-type semiconductor,CuBi_(2)O_(4)possesses a suitable bandgap and good stability.However,its performance is inhibited by high interfacial resistance and severe charge carrier recombination.In this study,a CuO interlayer was introduced between fluorine-doped tin oxide(FTO)and CuBi_(2)O_(4)to construct CuO/CuBi_(2)O_(4)photocathodes,aiming to improve interfacial charge transfer.The results showed that CuO/CuBi_(2)O_(4)-200 exhibited a photocurrent density of−1.71 mA/cm^(2)at 0 V vs.RHE,which was more than 3.5 times higher than that of bare CuBi_(2)O_(4).The incident photon-to-current efficiency(IPCE)at 365 nm was enhanced to~13%and the maximum applied bias photon-to-current efficiency(ABPE)reached 0.17%.Water splitting experiments revealed a hydrogen yield of 2.05μmol/cm^(2),significantly surpassing that of the unmodified photoelectrode.The enhanced PEC performance indicated that the CuO layer established a favorable band alignment,promoted hole transport toward the FTO substrate and effectively suppressed interfacial carrier recombination.This work demonstrated a simple and efficient interfacial engineering strategy,offering new insights and guidance for the design and development of high-performance semiconductor-based PEC photoelectrodes.
文摘Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography and microelectrode arrays.The challenges of these mentioned approaches are characterized by the bandwidth of the spatiotemporal resolution,which in turn is essential for large-area neuron recordings(Abiri et al.,2019).
基金support from National Natural Science Foundation of China(Grant No.51874033)to Prof.Hai-Yan Tang.
文摘In view of the frequent deterioration of molten steel quality during the tundish filling process,the slag-steel-air interface behavior in a tundish,including liquid level fluctuation,slag eyes,slag entrapment and air suction during the steady-state casting and filling process,was comparatively studied through physical modeling and mathematical simulation methods.During the filling process,the liquid surface forms a large-size slag eye under the impact of molten steel from a ladle shroud,which simultaneously results in a violent fluctuation of liquid level.Concurrently,the liquid flow entrains the air phase and the cover slag into the tundish impact zone,resulting in slag entrapment and air suction.At filling flow rates of 1.5Q,2.0Q,and 2.5Q(Q is the flow rate under steady-state casting),the amount of slag entrapped is 8.39×10^(-5),9.65×10^(-5),and 12.7×10^(-5)m^(3),respectively,while the volume of air aspirated is 0.84×10^(-4),1.47×10^(-4),and 2.01×10^(-4)m^(3),indicating that slag entrapment and air suction intensify with an increase in tundish filling flow rate.Flow field characterization identifies eddy currents in the impact zone as the primary driver of the above phenomena.Proper filling process parameters were proposed to improve the steel quality during the tundish filling.
基金supported by the National Natural Science Foundation of China(Nos.52072208 and 52261160384)supported by the Postdoctoral Fellowship Program(Grade B)of China Postdoctoral Science Foundation under Grant Number GZB20250057China Postdoctoral Science Foundation(2025M770223).
文摘With the growing global energy demand and the pressing need for a clean energy transition,supercapacitors(SCs)have demonstrated significant application potential in electric vehicles,wearable electronics,and renewable energy storage systems owing to their rapid charge-discharge capability,exceptional power density,and prolonged cycle life.The improvement of their overall performance fundamentally depends on the synergistic design of electrode materials and electrolyte systems,as well as the precise regulation of the electrode-electrolyte interface.This review focuses on the key components of supercapacitors,systematically reviewing the design strategies of high-performance electrode materials,outlining recent advances in novel electrolyte systems,and comprehensively discussing the critical roles of interfacial reinforcement and optimization in enhancing device energy density,power performance,and cycling stability.Furthermore,interfacial engineering strategies and innovations in device architecture are proposed to address interfacial degradation in flexible SCs under mechanical stress.Finally,key future research directions are highlighted,including the development of high-voltage and wide-temperature-range electrolyte systems and the integrated advancement of multiscale in situ characterization techniques and theoretical modeling.This review aims to provide theoretical guidance and innovative strategies for material design,contributing toward the realization of next-generation supercapacitors with enhanced energy density and reliability.
基金financially supported by the National Natural Science Foundation of China (No.52372188)Natural Science Foundation of Henan (Nos.242300421625,252300421333)+4 种基金CAS Henan Industrial Technology Innovation & Incubation Center (No.2024121)Key Scientific Research Project of Education Department of Henan Province (Nos.22A150042,23A150038,and 24A150019)2023 Introduction of studying abroad talent programthe China Postdoctoral Science Foundation (No.2019 M652546)Key Project of Science and Technology of Henan Province (No.252102240007)。
文摘Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread application.In this study,hemin was employed as a multi-functional artificial interface for the first time to inhibit the disordered growth of zinc dendrites and mitigate side reactions.Theoretical calculations indicate that hemin is preferentially adsorbed onto the zinc anode,thus blocking the interaction between the active zinc anode and electrolyte.Compared with zinc foil,the Hemin@Zn anode demonstrates enhanced corrosion resistance,a decrease in hydrogen evolution,and more orderly deposition of zinc.As expected,the symmetric cell with Hemin@Zn anode can sustain up to 4000 h at 0.2 mA/cm^(2),0.2 mAh/cm^(2).Asymmetric Zn//Cu cells exhibit an average coulombic efficiency exceeding 99.72 % during 500 cycles.Moreover,the full cell Hemin@Zn//NH_(4)V_(4)O_(10) delivers a superior capacity up to 367 m Ah/g and the discharge capacity retention reaches 124 mAh/g after 1200 cycles even at a current density of 5 A/g.This work provides a simple and effective method for constructing a robust artificial interface to promote the application of long-life AZIBs.
基金supported by the National Natural Science Foundation of China(22279068,52374306)the Taishan Scholars of Shandong Province(tsqn202408202)the Qingdao New Energy Shandong Laboratory Open Project(QNESL OP202312)。
文摘Preferential magnesium(Mg)electrodeposition on separators is a ubiquitous yet poorly understood phenomenon in rechargeable Mg-metal batteries,posing a fundamental challenge to their development.In this work,the synergy effects of interface-accelerating desolvation and spatial confinement have been demonstrated as the essential causation of this counterintuitive experimental phenomenon.At the molecular level,the imide ring(-CO-NR-CO-,in which R represents the phenyl)groups in an artificially introduced polyimide(PI)interlayer facilitate the strong electrostatic affinity towards Mg^(2+),which accelerates the desolvation process for Mg^(2+)solvation structures at the inner Helmholtz plane.At the nucleation scale,the wedge-like concave geometry formed at the PI/current collector interface provides energetically favorable sites for Mg nucleation.This unique architecture reduces the critical nucleus size,thereby significantly lowering nucleation energy barriers.As a result,the satisfactory Coulombic efficiency for Mg plating/stripping(98.22%)and cycle lifespan(1200 cycles,above 100 days)have been achieved,outperforming most of the previous results.This work pioneers a molecular-level understanding of separator-directed Mg deposition and resolves a long-standing confusion in Mg-metal batteries.
基金financially supported by the National Natural Science Foundation of China (No.52100076)the Fundamental Research Funds for the Central Universities (No.2023MS064)。
文摘The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerged as a promising solution for effectively degrading refractory organic pollutants in water under light conditions.This review delves into the advancements made in the field,focusing on strategies to enhance the generation of active species by modulating the micro-interface of the photoanode.Strategies,such as morphological control,element doping,introduction of surface oxygen vacancies,and construction of heterostructures,significantly improve the separation efficiency of photogenerated charges and the generation of active species,thereby boosting the efficiency of photoelectrocatalytic performance.Furthermore,the review explores the potential applications of photoelectrocatalytic technology in organic pollutant degradation in solutions.It also outlines the current challenges and future development directions.Despite its remarkable laboratory success,practical implementation of photoelectrocatalytic technology encounters obstacles related to stability,cost-effectiveness,and operational efficiency.Future investigations need to focus on optimizing the performance of photoelectrocatalytic materials and exploring strategies for upscaling their application in real water treatment scenarios.
基金funded by the National Natural Science Foundation of China(Nos.52209130 and 52379100)Shandong Provincial Natural Science Foundation(No.ZR2024ME112).
文摘Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.
