Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers of...Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers offer advantages such as reduced material usage,lower refrigerant charge,and compact structure.However,they also face challenges,including increased refrigerant pressure drop and smaller heat transfer area inside the tubes.This paper combines the advantages and disadvantages of both small and large-diameter tubes and proposes a combined-diameter heat exchanger,consisting of large and small diameters,for use in the indoor units of split-type air conditioners.There are relatively few studies in this area.In this paper,A theoretical and numerical computation method is employed to establish a theoretical-numerical calculation model,and its reliability is verified through experiments.Using this model,the optimal combined diameters and flow path design for a combined-diameter heat exchanger using R32 as the working fluid are derived.The results show that the heat transfer performance of all combined diameter configurations improves by 2.79%to 8.26%compared to the baseline design,with the coefficient of performance(COP)increasing from 4.15 to 4.27~4.5.These designs can save copper material,but at the cost of an increase in pressure drop by 66.86%to 131.84%.The scheme IIIH,using R32,is the optimal combined-diameter and flow path configuration that balances both heat transfer performance and economic cost.展开更多
Addressing limitations such as the lack of immersion and difficulties in comprehensively evaluating design schemes in traditional teaching models of environmental design courses,this study explores teaching reforms us...Addressing limitations such as the lack of immersion and difficulties in comprehensively evaluating design schemes in traditional teaching models of environmental design courses,this study explores teaching reforms using virtual simulation technology.An immersive virtual teaching environment was constructed,integrating virtual simulation technology gradually into the teaching process,with practical teaching cases used to assess the effectiveness of these reforms.Results demonstrate that virtual simulation technology significantly enhances students’spatial understanding and design expression abilities,while also improving teaching interactivity and student engagement.This reform aligns with the trend towards digital design,offering innovative ideas and methodologies for teaching environmental design courses.展开更多
In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design, a tri-hierarchical task classification model of ＂design for operation＂ is proposed...In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design, a tri-hierarchical task classification model of ＂design for operation＂ is proposed, which takes basic man-object interaction task, complex collaborative operation and large-scale joint operation into account. The corresponding general architecture of evaluation criteria is also depicted. Then a virtual simulation-based approach to implement the evaluations at three hierarchy levels is mainly analyzed with a detailed example, which validates the feasibility and effectiveness of evaluation architecture. Finally, extending the virtual simulation architecture from design to operation training is discussed.展开更多
High altitude air-launched autonomous underwater vehicle （AL-AUV） is a new anti-submarine field, which is designed on the Lockheed Martin＇s high altitude anti-submarine warfare weapons concept （HAAWC） and conduct...High altitude air-launched autonomous underwater vehicle （AL-AUV） is a new anti-submarine field, which is designed on the Lockheed Martin＇s high altitude anti-submarine warfare weapons concept （HAAWC） and conducts the basic aerodynamic feasibility in a series of wind tunnel trials. The AL-AUV is composed of a traditional torpedo-like AUV, an additional ex-range gliding wings unit and a descending parachute unit. In order to accurately and conveniently investigate the dynamic and static characteristic of high altitude AL-AUV, a simulation platform is established based on MATLAB/SIMULINK and an AUV 6DOF （Degree of Freedom） dynamic model. Executing the simulation platform for different wing＇s parameters and initial fixing angle, a set of AUV gliding data is generated. Analyzing the recorded simulation result, the velocity and pitch characteristics of AL-AUV deployed at varying wing areas and initial setting angle, the optimal wing area is selected for specific AUV model. Then the comparative simulations of AL-AUV with the selected wings are completed, which simulate the AUV gliding through idealized windless air environment and gliding with Dryden wind influence. The result indicates that the method of wing design and simulation with the simulation platform based on SIMULINK is accurately effective and suitable to be widely employed.展开更多
The paper establishes the relationship between the settling efficiency and the sizes of the sedimentation tank through the process of numerical simulation, which is taken as one of the constraints to set up a simple o...The paper establishes the relationship between the settling efficiency and the sizes of the sedimentation tank through the process of numerical simulation, which is taken as one of the constraints to set up a simple optimum designing model of sedimentation tank. The feasibility and advantages of this model based on numerical calculation are verified through the application of practical case.展开更多
A model for conceptual design of mechanical devices is studied based onqualitative simulation. In this model, the desired functions are expressed bystate-transit-diagrams(ST-diagrams) and design space is represented b...A model for conceptual design of mechanical devices is studied based onqualitative simulation. In this model, the desired functions are expressed bystate-transit-diagrams(ST-diagrams) and design space is represented byqualitative-state-curves(QS-curves). The first design idea, called seeds idea, is proposed by thedesigner and then is abstracted into QS-curves. The qualitative simulation is implemented based onthe QS-curves. By changing the motion of acting parts, the connection of parts and the motion ofdriving part, new design ideas are generated. With this model, a series of new design ideas derivedfrom the seeds idea can be achieved.展开更多
Engineering design is undergoing a paradigm shift from design for performance to design for affordability, operability, and durability, seeking multi-objective optimization. To facilitate this transformation, signific...Engineering design is undergoing a paradigm shift from design for performance to design for affordability, operability, and durability, seeking multi-objective optimization. To facilitate this transformation, significantly extended design freedom and knowledge must be available in the early design stages. This paper presents a high-fidelity framework for design and optimization of the liquid swirl injectors that are widely used in aerospace propulsion and power-generation systems. The framework assembles a set of techniques, including Design Of Experiment(DOE), high-fidelity Large Eddy Simulations(LES), machine learning, Proper Orthogonal Decomposition(POD)-based Kriging surrogate modeling(emulation), inverse problem optimization, and uncertainty quantification. LES-based simulations can reveal detailed spatiotemporal evolution of flow structures and flame dynamics in a high-fidelity manner, and identify important injector design parameters according to their effects on propellant mixing, flame stabilization, and thermal protection.For a given a space of design parameters, DOE determines the number of design points to perform LES-based simulations. POD-based emulations, trained by the LES database, can effectively explore the design space and deduce an optimal group of design parameters in a turn-around time that is reduced by three orders of magnitude. The accuracy of the emulated results is validated, and the uncertainty of prediction is quantified. The proposed design methodology is expected to profoundly extend the knowledge base and reduce the cost for initial design stages.展开更多
Reliability model of a mechanical product system will be newly reconstructed and maintenance cost will increase because failed parts can be replaced with new components during service,which should be accounted for in ...Reliability model of a mechanical product system will be newly reconstructed and maintenance cost will increase because failed parts can be replaced with new components during service,which should be accounted for in system design.In this paper,a reliability model and reliability-based design optimization methodology for maintenance are presented.First,based on the time-to-failure density function of the part of the system,the age distributions of all parts of the system during service are investigated,a reliability model of the mechanical system for maintenance is developed.Then,reliability simulations of the systems with WeibuU probability density functions are performed,the system minimum reliability and steady reliability for maintenance are defined based on reliability simulation during the life cycle of the system.Thirdly,a maintenance cost model is developed based on replacement rates of the parts,a reliability-based design optimization model for maintenance is presented,in which total life cycle cost is considered as design objective and system reliability as design constrain.Finally,the reliability-based design optimization methodology for maintenance is used to design of a link ring for the chain conveyor,which shows that optimal design with the lowest maintenance cost can be obtained,and minimum reliability and steady reliability of the system can satisfy requirement of system reliability during service of the chain conveyor.展开更多
Room and pillar sizes are key factors for safe mining and ore recovery in open-stope mining. To investigate the influence of room and pillar configurations on stope stability in highly fractured and weakened areas, an...Room and pillar sizes are key factors for safe mining and ore recovery in open-stope mining. To investigate the influence of room and pillar configurations on stope stability in highly fractured and weakened areas, an orthogonal design with two factors, three levels and nine runs was proposed, followed by three-dimensional numerical simulation using ANSYS and FLAC3~. Results show that surface settlement after excavation is concentrically ringed, and increases with the decrease of pillar width and distances to stope gobs. In the meantime, the ore-control fault at the ore-rock boundary and the fractured argillaceous dolomite with intercalated slate at the hanging wall deteriorate the roof settlement. Additionally, stope stability is challenged due to pillar rheological yield and stress concentration, and both are induced by redistribution of stress and plastic zones after mining. Following an objective function and a constraint function, room and pillar configuration with widths of 14 m and 16 m, respectively, is presented as the optimization for improving the ore recovery rate while maintaining a safe working environment.展开更多
Traditional parafoil homing usually uses a point as object. As the mobility of parafoil is limited by its glide ratio and wind, in some cases when the parafoil scatter area is large, or the glide ratio of parafoil is ...Traditional parafoil homing usually uses a point as object. As the mobility of parafoil is limited by its glide ratio and wind, in some cases when the parafoil scatter area is large, or the glide ratio of parafoil is small, the deviation of its landing point to object point will be arduous to control. Accordingly, during these situations, when parafoil is used in recovery of spacecraft or satellite, the landing area of parafoil can be set as a rectangle, and the object of parafoil can be set as a line segment. The thesis of this work is designing an algorithm for parafoil homing using line segment as object. The algorithm of wind velocity and direction calculation in different flying segments was also investigated. The algorithm designed navigates the parafoil to land into the predestined area and largely reduce the probability of recovery loads falling to unwanted area to damage houses and people.展开更多
This paper investigates the dynamic design methodology of mountain bikes with rear suspension. Firstly, a multi-rigid body dynamic model of rider and mountain bike coupled system is constructed. The rider model includ...This paper investigates the dynamic design methodology of mountain bikes with rear suspension. Firstly, a multi-rigid body dynamic model of rider and mountain bike coupled system is constructed. The rider model includes 19 skeletons, 18 joints and 118 main muscles. Secondly, to validate the feasibility of the model, an experiment test is designed to reflect the real cycling status. Finally, aiming at enhancing the performance of the rider vibration comfort, the scale parameters of rear suspension are optimized with computer simulation and uniform design. The mathematical model in the vibration performance and the design variables is constructed with regression analysis. The result shows that when the length of side link is 90 mm, the length of connected rod is 336.115 1 mm and the included angle between absorber and side link is 60°, the mountain bike has better vibration comfort. This study and relevant conclusions are of practical importance to the design of the mountain bike＇s rear suspension system.展开更多
Vegetation plays a key role in improving wind environment of residential districts,and is helpful for creating a comfortable and beautiful living environment.The optimal design of vegetation for wind environment impro...Vegetation plays a key role in improving wind environment of residential districts,and is helpful for creating a comfortable and beautiful living environment.The optimal design of vegetation for wind environment improvement in winter was investigated by carrying out field experiments in Heqingyuan residential area in Beijing,and after that,numerical simulation with SPOTE(simulation platform for outdoor thermal environment) experiments for outdoor thermal environment of vegetation was adopted for comparison.The conclusions were summarized as follows:1) By comparing the experimental data with simulation results,it could be concluded that the wind field simulated was consistent with the actual wind field,and the flow distribution impacted by vegetation could be accurately reflected;2) The wind velocity with vegetation was lower than that without vegetation,and the wind velocity was reduced by 46%;3) By adjusting arrangement and types of vegetation in the regions with excessively large wind velocity,the pedestrian-level wind velocity could be obviously improved through the simulation and comparison.展开更多
AlSi10Mg fabricated by selective laser melting(SLM)had a unique network-like silicon-rich structure,and the mechanism for its formation was explained by molecular dynamics(MD)simulations.The effects of the silicon-ric...AlSi10Mg fabricated by selective laser melting(SLM)had a unique network-like silicon-rich structure,and the mechanism for its formation was explained by molecular dynamics(MD)simulations.The effects of the silicon-rich phase and Mg-containing structure on corrosion were studied by first-principles methods.According to the simulations,corrosion resistant materials were designed,samples with laser powers of 150 W,200 W and 250 W were fabricated.The results indicated that a local thermal gradient during laser printing caused Si segregation,and the rapid cooling rate lead to a large number of subgrains,which assisted precipitation.The difference in potential caused galvanic corrosion,and a structure with low work function in the molten pool caused pitting.The corrosion resistance of materials processed with a high laser power increased.展开更多
Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coa...Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coal Mining Abatement Technology Support Package(CMATSP), threedimensional CFD simulations were conducted to test and optimise a conceptual design which proposes using horizontal boreholes to replace vertical boreholes at an underground coal mine in Australia.Drainage performance between a vertical borehole and a horizontal borehole was first carried out to compare their capacity and effectiveness. Then a series of cases with different horizontal borehole designs were simulated to optimise borehole configuration parameters such as location, diameter, and number of boreholes. The study shows that the horizontal borehole is able to create low pressure sinks that protect the workings from goaf gas ingresses by changing goaf gas flow directions, and that it has the advantage to continuously maintain such low pressure sinks near the tailgate as the longwall advances. An example of optimising horizontal borehole locations in the longwall lateral direction is also given in this paper.展开更多
Rational design of ionic liquids(ILs),which is highly dependent on the accuracy of the model used,has always been crucial for CO_(2)separation from flue gas.In this study,a support vector machine(SVM)model which is a ...Rational design of ionic liquids(ILs),which is highly dependent on the accuracy of the model used,has always been crucial for CO_(2)separation from flue gas.In this study,a support vector machine(SVM)model which is a machine learning approach is established,so as to improve the prediction accuracy and range of IL melting points.Based on IL melting points data with 600 training data and 168 testing data,the estimated average absolute relative deviations(AARD)and squared correlation coefficients(R^(2))are 3.11%,0.8820 and 5.12%,0.8542 for the training set and testing set of the SVM model,respectively.Then,through the melting points model and other rational design processes including conductor-like screening model for real solvents(COSMO-RS)calculation and physical property constraints,cyano-based ILs are obtained,in which tetracyanoborate[TCB]-is often ruled out due to incorrect estimation of melting points model in the literature.Subsequently,by means of process simulation using Aspen Plus,optimal IL are compared with excellent IL reported in the literature.Finally,1-ethyl-3-methylimidazolium tricyanomethanide[EMIM][TCM]is selected as a most suitable solvent for CO_(2)separation from flue gas,the process of which leads to 12.9%savings on total annualized cost compared to that of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide[EMIM][Tf_(2)N].展开更多
It is practical, economic and sometimes essential to derive rules or conclusions by performing lesser runs of experiments. In this part, a methodology based on 2 f factorial design was brought up to derive guidelines ...It is practical, economic and sometimes essential to derive rules or conclusions by performing lesser runs of experiments. In this part, a methodology based on 2 f factorial design was brought up to derive guidelines to simulate growth curve and production of sugars by Spirulina (Arthrospira) maxima . The growth curve or accumulation process of sugars was idealized by sets of straight lines limited by phase transfers of growth or accumulation of sugars. Normal analyses of the critical values of the transfers were used to derive their linear relationships with the initial conditions of the experimental factors. These linear functions were called guidelines and were used to simulate the growth curve or accumulation of sugars. Generalization of the guideline technique was determined by the kinetic limitation of nutrient nitrogen or sulfur that was dependent upon their stoichiometric deficiency directly derived from their initial values in the medium. This method uses the initial conditions of culture and does not need measurements of concentrations of nitrate, sulfate and pigments during cultivation. It is a practical and useful alternative way to trace and predict approximately the growth curve and production of sugars by S. maxima .展开更多
A movement law of laser beam facula is designed for the injection trajectory of hyper-ve- locity kinetic energy missile to eliminate the influence of motor exhaust smoke on laser signal trans mission. Taking guidance...A movement law of laser beam facula is designed for the injection trajectory of hyper-ve- locity kinetic energy missile to eliminate the influence of motor exhaust smoke on laser signal trans mission. Taking guidance loop of hyper velocity kinetic energy missile as plant, a closed loop control system with desired step response characteristics is constructed and the movement law of laser beam facula for the missile injection trajectory is designed based on the output signal of the closed loop controller under a step input. Six degree of freedom trajectory simulations show that by the guidance of the laser beam facula moving with designed law, the missile can finish transition from the initial trajectory to a stable tracking trajectory without overshoot within the required time.展开更多
Proposed and demonstrated is a novel computer modeling method for high power light emitting diodes(LEDs). It contains geometrical structure and optical property of high power LED as well as LED dies definition with it...Proposed and demonstrated is a novel computer modeling method for high power light emitting diodes(LEDs). It contains geometrical structure and optical property of high power LED as well as LED dies definition with its spatial and angular distribution. Merits and non-merits of traditional modeling methods when applied to high power LEDs based on secondary optical design are discussed. Two commercial high power LEDs are simulated using the proposed computer modeling method. Correlation coefficient is proposed to compare and analyze the simulation results and manufacturing specifications. The source model is precisely demonstrated by obtaining above 99% in correlation coefficient with different surface incident angle intervals.展开更多
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
基金supported by Supported by the Scientific Research Foundation for High-Level Talents of Zhoukou Normal University(ZKNUC2024018).
文摘Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers offer advantages such as reduced material usage,lower refrigerant charge,and compact structure.However,they also face challenges,including increased refrigerant pressure drop and smaller heat transfer area inside the tubes.This paper combines the advantages and disadvantages of both small and large-diameter tubes and proposes a combined-diameter heat exchanger,consisting of large and small diameters,for use in the indoor units of split-type air conditioners.There are relatively few studies in this area.In this paper,A theoretical and numerical computation method is employed to establish a theoretical-numerical calculation model,and its reliability is verified through experiments.Using this model,the optimal combined diameters and flow path design for a combined-diameter heat exchanger using R32 as the working fluid are derived.The results show that the heat transfer performance of all combined diameter configurations improves by 2.79%to 8.26%compared to the baseline design,with the coefficient of performance(COP)increasing from 4.15 to 4.27~4.5.These designs can save copper material,but at the cost of an increase in pressure drop by 66.86%to 131.84%.The scheme IIIH,using R32,is the optimal combined-diameter and flow path configuration that balances both heat transfer performance and economic cost.
基金The 2024 National Social Science Fund West Project“Research on Cultural Inheritance and Digital Protection of Rural Settlements in Southwest China”(24XSH012)The 2024 Provincial Undergraduate University Innovative Experimental Project“Innovative Design Experimental Teaching Project under Digital Twin 3D Visualization Platform”The 2025 Sichuan University Artificial Intelligence Empowered Innovative Experimental Technology Research Project“Research on the Upgrade of VR-based Exhibition Space Free Construction and Dual-user Interactive Virtual Simulation Experimental Platform”(SCU2025009)。
文摘Addressing limitations such as the lack of immersion and difficulties in comprehensively evaluating design schemes in traditional teaching models of environmental design courses,this study explores teaching reforms using virtual simulation technology.An immersive virtual teaching environment was constructed,integrating virtual simulation technology gradually into the teaching process,with practical teaching cases used to assess the effectiveness of these reforms.Results demonstrate that virtual simulation technology significantly enhances students’spatial understanding and design expression abilities,while also improving teaching interactivity and student engagement.This reform aligns with the trend towards digital design,offering innovative ideas and methodologies for teaching environmental design courses.
文摘In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design, a tri-hierarchical task classification model of ＂design for operation＂ is proposed, which takes basic man-object interaction task, complex collaborative operation and large-scale joint operation into account. The corresponding general architecture of evaluation criteria is also depicted. Then a virtual simulation-based approach to implement the evaluations at three hierarchy levels is mainly analyzed with a detailed example, which validates the feasibility and effectiveness of evaluation architecture. Finally, extending the virtual simulation architecture from design to operation training is discussed.
文摘High altitude air-launched autonomous underwater vehicle （AL-AUV） is a new anti-submarine field, which is designed on the Lockheed Martin＇s high altitude anti-submarine warfare weapons concept （HAAWC） and conducts the basic aerodynamic feasibility in a series of wind tunnel trials. The AL-AUV is composed of a traditional torpedo-like AUV, an additional ex-range gliding wings unit and a descending parachute unit. In order to accurately and conveniently investigate the dynamic and static characteristic of high altitude AL-AUV, a simulation platform is established based on MATLAB/SIMULINK and an AUV 6DOF （Degree of Freedom） dynamic model. Executing the simulation platform for different wing＇s parameters and initial fixing angle, a set of AUV gliding data is generated. Analyzing the recorded simulation result, the velocity and pitch characteristics of AL-AUV deployed at varying wing areas and initial setting angle, the optimal wing area is selected for specific AUV model. Then the comparative simulations of AL-AUV with the selected wings are completed, which simulate the AUV gliding through idealized windless air environment and gliding with Dryden wind influence. The result indicates that the method of wing design and simulation with the simulation platform based on SIMULINK is accurately effective and suitable to be widely employed.
文摘The paper establishes the relationship between the settling efficiency and the sizes of the sedimentation tank through the process of numerical simulation, which is taken as one of the constraints to set up a simple optimum designing model of sedimentation tank. The feasibility and advantages of this model based on numerical calculation are verified through the application of practical case.
基金This project is supported by National Natural Science Foundation of China (No.50205019)Development Foundation of Shanghai Municipal Commission of Education, China (No.04EB03).
文摘A model for conceptual design of mechanical devices is studied based onqualitative simulation. In this model, the desired functions are expressed bystate-transit-diagrams(ST-diagrams) and design space is represented byqualitative-state-curves(QS-curves). The first design idea, called seeds idea, is proposed by thedesigner and then is abstracted into QS-curves. The qualitative simulation is implemented based onthe QS-curves. By changing the motion of acting parts, the connection of parts and the motion ofdriving part, new design ideas are generated. With this model, a series of new design ideas derivedfrom the seeds idea can be achieved.
基金sponsored by the William RT Oakes Endowment of the Georgia Institute of Technology
文摘Engineering design is undergoing a paradigm shift from design for performance to design for affordability, operability, and durability, seeking multi-objective optimization. To facilitate this transformation, significantly extended design freedom and knowledge must be available in the early design stages. This paper presents a high-fidelity framework for design and optimization of the liquid swirl injectors that are widely used in aerospace propulsion and power-generation systems. The framework assembles a set of techniques, including Design Of Experiment(DOE), high-fidelity Large Eddy Simulations(LES), machine learning, Proper Orthogonal Decomposition(POD)-based Kriging surrogate modeling(emulation), inverse problem optimization, and uncertainty quantification. LES-based simulations can reveal detailed spatiotemporal evolution of flow structures and flame dynamics in a high-fidelity manner, and identify important injector design parameters according to their effects on propellant mixing, flame stabilization, and thermal protection.For a given a space of design parameters, DOE determines the number of design points to perform LES-based simulations. POD-based emulations, trained by the LES database, can effectively explore the design space and deduce an optimal group of design parameters in a turn-around time that is reduced by three orders of magnitude. The accuracy of the emulated results is validated, and the uncertainty of prediction is quantified. The proposed design methodology is expected to profoundly extend the knowledge base and reduce the cost for initial design stages.
基金supported by National Basic Research Program of China(973 Program,Grant No.2003CB317001)Scientific Research Fund of Hunan Provincial Education Department of China(Grant No.07A018)+1 种基金Hunan Provincial Natural Science Foundation of China(Grant No.07JJ5074)National Natural Science Foundation of China(Grant No.50875082)
文摘Reliability model of a mechanical product system will be newly reconstructed and maintenance cost will increase because failed parts can be replaced with new components during service,which should be accounted for in system design.In this paper,a reliability model and reliability-based design optimization methodology for maintenance are presented.First,based on the time-to-failure density function of the part of the system,the age distributions of all parts of the system during service are investigated,a reliability model of the mechanical system for maintenance is developed.Then,reliability simulations of the systems with WeibuU probability density functions are performed,the system minimum reliability and steady reliability for maintenance are defined based on reliability simulation during the life cycle of the system.Thirdly,a maintenance cost model is developed based on replacement rates of the parts,a reliability-based design optimization model for maintenance is presented,in which total life cycle cost is considered as design objective and system reliability as design constrain.Finally,the reliability-based design optimization methodology for maintenance is used to design of a link ring for the chain conveyor,which shows that optimal design with the lowest maintenance cost can be obtained,and minimum reliability and steady reliability of the system can satisfy requirement of system reliability during service of the chain conveyor.
基金Projects(50934002,51074013,51104100)supported by the National Natural Science Foundation of ChinaProject(IRT0950)supported by the Program for Changjiang Scholars and Innovative Research Team in University of China
文摘Room and pillar sizes are key factors for safe mining and ore recovery in open-stope mining. To investigate the influence of room and pillar configurations on stope stability in highly fractured and weakened areas, an orthogonal design with two factors, three levels and nine runs was proposed, followed by three-dimensional numerical simulation using ANSYS and FLAC3~. Results show that surface settlement after excavation is concentrically ringed, and increases with the decrease of pillar width and distances to stope gobs. In the meantime, the ore-control fault at the ore-rock boundary and the fractured argillaceous dolomite with intercalated slate at the hanging wall deteriorate the roof settlement. Additionally, stope stability is challenged due to pillar rheological yield and stress concentration, and both are induced by redistribution of stress and plastic zones after mining. Following an objective function and a constraint function, room and pillar configuration with widths of 14 m and 16 m, respectively, is presented as the optimization for improving the ore recovery rate while maintaining a safe working environment.
基金Project(61503077)supported by the National Natural Science Foundation of ChinaProject(BK20130628)supported by the Jiangsu Natural Science Foundation,China
文摘Traditional parafoil homing usually uses a point as object. As the mobility of parafoil is limited by its glide ratio and wind, in some cases when the parafoil scatter area is large, or the glide ratio of parafoil is small, the deviation of its landing point to object point will be arduous to control. Accordingly, during these situations, when parafoil is used in recovery of spacecraft or satellite, the landing area of parafoil can be set as a rectangle, and the object of parafoil can be set as a line segment. The thesis of this work is designing an algorithm for parafoil homing using line segment as object. The algorithm of wind velocity and direction calculation in different flying segments was also investigated. The algorithm designed navigates the parafoil to land into the predestined area and largely reduce the probability of recovery loads falling to unwanted area to damage houses and people.
基金supported by Tianjin Municipal Science and Technology Development Project of China (Grant No. 043186211)Tianjin Municipal Key Laboratory of Advanced Manufacturing Technology and Equipment of Tianjin University of China
文摘This paper investigates the dynamic design methodology of mountain bikes with rear suspension. Firstly, a multi-rigid body dynamic model of rider and mountain bike coupled system is constructed. The rider model includes 19 skeletons, 18 joints and 118 main muscles. Secondly, to validate the feasibility of the model, an experiment test is designed to reflect the real cycling status. Finally, aiming at enhancing the performance of the rider vibration comfort, the scale parameters of rear suspension are optimized with computer simulation and uniform design. The mathematical model in the vibration performance and the design variables is constructed with regression analysis. The result shows that when the length of side link is 90 mm, the length of connected rod is 336.115 1 mm and the included angle between absorber and side link is 60°, the mountain bike has better vibration comfort. This study and relevant conclusions are of practical importance to the design of the mountain bike＇s rear suspension system.
基金Project(50878111) supported by the National Natural Science Foundation of China
文摘Vegetation plays a key role in improving wind environment of residential districts,and is helpful for creating a comfortable and beautiful living environment.The optimal design of vegetation for wind environment improvement in winter was investigated by carrying out field experiments in Heqingyuan residential area in Beijing,and after that,numerical simulation with SPOTE(simulation platform for outdoor thermal environment) experiments for outdoor thermal environment of vegetation was adopted for comparison.The conclusions were summarized as follows:1) By comparing the experimental data with simulation results,it could be concluded that the wind field simulated was consistent with the actual wind field,and the flow distribution impacted by vegetation could be accurately reflected;2) The wind velocity with vegetation was lower than that without vegetation,and the wind velocity was reduced by 46%;3) By adjusting arrangement and types of vegetation in the regions with excessively large wind velocity,the pedestrian-level wind velocity could be obviously improved through the simulation and comparison.
基金the National Key Research and Development program of China(No.2017YFB 0702300)Fundamental Research Funds for the Central Universities(No.FRF-TP-18-002B2)National Natural Science Foundation of China(No.51671029)。
文摘AlSi10Mg fabricated by selective laser melting(SLM)had a unique network-like silicon-rich structure,and the mechanism for its formation was explained by molecular dynamics(MD)simulations.The effects of the silicon-rich phase and Mg-containing structure on corrosion were studied by first-principles methods.According to the simulations,corrosion resistant materials were designed,samples with laser powers of 150 W,200 W and 250 W were fabricated.The results indicated that a local thermal gradient during laser printing caused Si segregation,and the rapid cooling rate lead to a large number of subgrains,which assisted precipitation.The difference in potential caused galvanic corrosion,and a structure with low work function in the molten pool caused pitting.The corrosion resistance of materials processed with a high laser power increased.
基金the Department of Industry and Science,Australian Government for funding this researchthe management and staff of Glencore Bulga Underground Operations for their significant contributions in this project
文摘Computational fluid dynamics(CFD) simulation is an effective approach to develop and optimise gas drainage design for underground longwall coal mining. As part of the project supported by the Australian Government Coal Mining Abatement Technology Support Package(CMATSP), threedimensional CFD simulations were conducted to test and optimise a conceptual design which proposes using horizontal boreholes to replace vertical boreholes at an underground coal mine in Australia.Drainage performance between a vertical borehole and a horizontal borehole was first carried out to compare their capacity and effectiveness. Then a series of cases with different horizontal borehole designs were simulated to optimise borehole configuration parameters such as location, diameter, and number of boreholes. The study shows that the horizontal borehole is able to create low pressure sinks that protect the workings from goaf gas ingresses by changing goaf gas flow directions, and that it has the advantage to continuously maintain such low pressure sinks near the tailgate as the longwall advances. An example of optimising horizontal borehole locations in the longwall lateral direction is also given in this paper.
基金the financial support by the National Natural Science Foundation of China(Project No.21878054)the Natural Science Foundation of Fujian Province of China(2020J01515)
文摘Rational design of ionic liquids(ILs),which is highly dependent on the accuracy of the model used,has always been crucial for CO_(2)separation from flue gas.In this study,a support vector machine(SVM)model which is a machine learning approach is established,so as to improve the prediction accuracy and range of IL melting points.Based on IL melting points data with 600 training data and 168 testing data,the estimated average absolute relative deviations(AARD)and squared correlation coefficients(R^(2))are 3.11%,0.8820 and 5.12%,0.8542 for the training set and testing set of the SVM model,respectively.Then,through the melting points model and other rational design processes including conductor-like screening model for real solvents(COSMO-RS)calculation and physical property constraints,cyano-based ILs are obtained,in which tetracyanoborate[TCB]-is often ruled out due to incorrect estimation of melting points model in the literature.Subsequently,by means of process simulation using Aspen Plus,optimal IL are compared with excellent IL reported in the literature.Finally,1-ethyl-3-methylimidazolium tricyanomethanide[EMIM][TCM]is selected as a most suitable solvent for CO_(2)separation from flue gas,the process of which leads to 12.9%savings on total annualized cost compared to that of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide[EMIM][Tf_(2)N].
文摘It is practical, economic and sometimes essential to derive rules or conclusions by performing lesser runs of experiments. In this part, a methodology based on 2 f factorial design was brought up to derive guidelines to simulate growth curve and production of sugars by Spirulina (Arthrospira) maxima . The growth curve or accumulation process of sugars was idealized by sets of straight lines limited by phase transfers of growth or accumulation of sugars. Normal analyses of the critical values of the transfers were used to derive their linear relationships with the initial conditions of the experimental factors. These linear functions were called guidelines and were used to simulate the growth curve or accumulation of sugars. Generalization of the guideline technique was determined by the kinetic limitation of nutrient nitrogen or sulfur that was dependent upon their stoichiometric deficiency directly derived from their initial values in the medium. This method uses the initial conditions of culture and does not need measurements of concentrations of nitrate, sulfate and pigments during cultivation. It is a practical and useful alternative way to trace and predict approximately the growth curve and production of sugars by S. maxima .
文摘A movement law of laser beam facula is designed for the injection trajectory of hyper-ve- locity kinetic energy missile to eliminate the influence of motor exhaust smoke on laser signal trans mission. Taking guidance loop of hyper velocity kinetic energy missile as plant, a closed loop control system with desired step response characteristics is constructed and the movement law of laser beam facula for the missile injection trajectory is designed based on the output signal of the closed loop controller under a step input. Six degree of freedom trajectory simulations show that by the guidance of the laser beam facula moving with designed law, the missile can finish transition from the initial trajectory to a stable tracking trajectory without overshoot within the required time.
基金The"863"Project of National Ministry of Science and Technology(2006AA03A175)
文摘Proposed and demonstrated is a novel computer modeling method for high power light emitting diodes(LEDs). It contains geometrical structure and optical property of high power LED as well as LED dies definition with its spatial and angular distribution. Merits and non-merits of traditional modeling methods when applied to high power LEDs based on secondary optical design are discussed. Two commercial high power LEDs are simulated using the proposed computer modeling method. Correlation coefficient is proposed to compare and analyze the simulation results and manufacturing specifications. The source model is precisely demonstrated by obtaining above 99% in correlation coefficient with different surface incident angle intervals.
