With increasing water depth,marine drilling conductors exhibit higher slenderness ratios,significantly reducing their resistance to environmental loads in Arctic waters.These conductors,when subjected to combined wind...With increasing water depth,marine drilling conductors exhibit higher slenderness ratios,significantly reducing their resistance to environmental loads in Arctic waters.These conductors,when subjected to combined wind,current,and ice loads,may experience substantial horizontal displacements and bending moments,potentially compromising off-shore operational safety and wellhead stability.Additionally,soil disturbance near the mudline diminishes the conductor’s bearing capacity,potentially rendering it inadequate for wellhead support and increasing operational risks.This study introduces a static analysis model based on plastic hinge theory to evaluate conductor survivability.The conductor analysis divides the structure into three segments:above waterline,submerged,and embedded below mudline.An idealized elastic-plastic p-y curve model characterizes soil behavior beneath the mudline,while the finite difference method(FDM)analyzes the conductor’s mechanical response under complex pile-head boundary conditions.Numerical simulations using ABAQUS validate the plastic hinge approach against conventional methods,confirming its accuracy in predicting structural performance.These results provide valuable insights for optimizing installation depths and bearing capacity designs of marine drilling conductors in ice-prone regions.展开更多
Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical e...Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical experimental measurement and numerical simulation pose research challenges.This study focuses on the ice load of a cylinder structure breaking upward through the ice sheet form underneath in the Small Ice Model Basin of China Ship Scientific Research Center(CSSRC SIMB).A high-speed camera system was employed to observe the ice sheet failure during the tests,in which,with the loading position as center,local radial cracks and circumferential cracks were generated.A load sensor was used to measure the overall ice load during this process.Meanwhile,a numerical model was developed using LS-DYNA for validation and comparison.With this model,numerical simulation was conducted under various ice thicknesses and upgoing speeds to analyze the instantaneous curves of ice load.The calculation results were statistically analyzed under different working conditions to determine the influence of the factors on the ice load of the cylinder.The study explores the measurement method about ice load of objects vertically breaking through model ice sheet and is expected to provide some fundamental insights into the safety design of underwater structures operating in ice waters.展开更多
Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice ...Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields.展开更多
Moored structures are suitable for operations in ice-covered regions owing to their security and efficiency.This paper aims to present a new method for simulating the ice load and mooring force on the moored structure...Moored structures are suitable for operations in ice-covered regions owing to their security and efficiency.This paper aims to present a new method for simulating the ice load and mooring force on the moored structure during ice-structure interaction with a spherical Discrete Element Method(DEM).In this method,the level ice and mooring lines consist of bonded sphere elements arranged in different patterns.The level ice model has been widely validated in simulation of the ice load of fixed structures.In the mooring line simulation,a string of spherical elements was jointed with the parallel bond model to simulate the chains or cable structure.The accuracy of the mooring line model was proved by comparing the numerical results with the nonlinear FEM results and model towing experiment results.The motion of the structure was calculated in the quaternion method,considering the ice load,mooring force,and hydrodynamic force.The hydrodynamic force comprised wave-making damping,current drag,and buoyancy force.Based on the proposed model,the interaction of a semi-submersible structure with level ice was simulated,and the effect of ice thickness on the ice load was analyzed.The numerical results show that the DEM method is suitable to simulate the ice load and mooring force on moored floating structures.展开更多
Ice load is one of the most important factors for design of marine stuctures in cold sea area.The designcriteria of ice loads for marine structures consist of two parts: level ice thickness and crushing strength. Due ...Ice load is one of the most important factors for design of marine stuctures in cold sea area.The designcriteria of ice loads for marine structures consist of two parts: level ice thickness and crushing strength. Due to thestrong randomness of the affecting factors on ice thickness and crushing strength, such as ice temperature,air temperature, water temperature,salinity,wind field, numerical simulation method method can not produce satisfactory results. Thispaper proposes a method of uncertainty analysis and joint probabilistic prediction of level ice thickness and crushingstrength instead of traditional ice load criteria for marine structures.展开更多
This paper investigates the possibility of utilizing response from natural ice loading for modal parameter identification of real offshore platforms.The test platform is the JZ20-2 MUQ jacket platform located in the L...This paper investigates the possibility of utilizing response from natural ice loading for modal parameter identification of real offshore platforms.The test platform is the JZ20-2 MUQ jacket platform located in the Liaodong Bay,China.A field experiment is carried out in winter season,as the platform is excited by floating ices.The feasibility is demonstrated by the acceleration response of two different segments.By the SSI-data method,the modal frequencies and damping ratios of four structural modes can be successfully identified from both segments.The estimated information from both segments is almost identical,which demonstrates that the modal identification is trustworthy.Furthermore,by taking the Jacket platform as a benchmark,the numerical performance of five popular time-domain EMA methods is systematically compared from different viewpoints.The comparisons are categorized as:(1)stochastic methods versus deterministic methods;(2)high-order methods versus low-order methods;(3)data-driven versus covariance-driven stochastic subspace identification methods.展开更多
Three types of ice loading, which are most commonly present when ice acts on structures, are chosen and simulated for use of fatigue crack propagation tests on offshore structural steel A131. The three types of ice ca...Three types of ice loading, which are most commonly present when ice acts on structures, are chosen and simulated for use of fatigue crack propagation tests on offshore structural steel A131. The three types of ice categorized in accordance with the failure modes when acting on structures called Crushing ice, bending ice, and buckling ice, respectively. This paper presents an experimental investigation on the fatigue crack propagation behavior of widely used high strength steel A131 for offshore jackets in the loading environment of ice crushing, bending, and buckling. The test results of fatigue crack propagation in steel A131 tinder these simulated ice loading at temperature 292K are presented and analyzed in detail in this paper, The amplitude root mean square stress intensity factor is optimized to be the fundamental parameter of fatigue crack propagation for all types of ice loading histories. The results are also compared with constant amplitude fatigue crack propagation conclusions as in wave load mode, and a joint investigation on the results from ice forces, ice-induced vibrations, and ice-induced fatigue crack propagation is conducted. Conclusions are drawn for reference in structural design and material selection for offshore structures in ice environments.展开更多
In this study,a numerical method was developed based on peridynamics to determine the ice loads for a ship navigating in level ice.Convergence analysis of threedimensional ice specimen with tensile and compression loa...In this study,a numerical method was developed based on peridynamics to determine the ice loads for a ship navigating in level ice.Convergence analysis of threedimensional ice specimen with tensile and compression loading are carried out first.The effects of ice thickness,sailing speed,and ice properties on the mean ice loads were also investigated.It is observed that the ice fragments resulting from the icebreaking process will interact with one another as well as with the water and ship hull.The ice fragments may rotate,collide,or slide along the ship hull,and these ice fragments will eventually drift away from the ship.The key characteristics of the icebreaking process can be obtained using the peridynamic model such as the dynamic generation of cracks in the ice sheet,propagation and accumulation of ice fragments,as well as collision,rotation,and sliding of the ice fragments along the ship hull.The simulation results obtained for the ice loads and icebreaking process were validated against those determined from the Lindqvist empirical formula and there is good agreement between the results.展开更多
Usually, the action of sea ice on offshore engineering structures is one of the controlling loads in cold waters engineering structure design. The reasonable selection of environmental condition and the physical mecha...Usually, the action of sea ice on offshore engineering structures is one of the controlling loads in cold waters engineering structure design. The reasonable selection of environmental condition and the physical mechanical properties of ice in the region are directly related to the structure design, operation and safety. In this paper, the sea ice force acting on the structure, the physical mechanical properties of ice and the selection of parameters in calculation are discussed. Some suggestions are proposed as to the calculation of various kinds of ice loads acting on the structure.展开更多
Two series of model tests were performed to observe the dynamic ice loads on conical structures.The variable testing parameters include the water line diameter of the model cone and ice parameters.During small water l...Two series of model tests were performed to observe the dynamic ice loads on conical structures.The variable testing parameters include the water line diameter of the model cone and ice parameters.During small water line diameter tests,two-time breaking is found to be the typical failure of ice on steep conical structure,and also be controlled by other factors,such as ice speed and the cone angle.During big water line diameter tests,the ice sheet failed nonsimultaneously around the cone.Several independent zones of bending were found in the nonsimultaneous failure process of ice.With the increase of the ratio of D/h and the number of independent zones,the total ice force was found being gradually reduced.展开更多
Ice-breaking methods have become increasingly significant with the ongoing development of the polar regions.Among many ice-breaking methods,ice-breaking that utilizes a moving load is unique compared with the common c...Ice-breaking methods have become increasingly significant with the ongoing development of the polar regions.Among many ice-breaking methods,ice-breaking that utilizes a moving load is unique compared with the common collision or impact methods.A moving load can generate flexural-gravity waves(FGWs),under the influence of which the ice sheet undergoes deformation and may even experience structural damage.Moving loads can be divided into above-ice loads and underwater loads.For the above-ice loads,we discuss the characteristics of the FGWs generated by a moving load acting on a complete ice sheet,an ice sheet with a crack,and an ice sheet with a lead of open water.For underwater loads,we discuss the influence on the ice-breaking characteristics of FGWs of the mode of motion,the geometrical features,and the trajectory of motion of the load.In addition to discussing the status of current research and the technical challenges of ice-breaking by moving loads,this paper also looks ahead to future research prospects and presents some preliminary ideas for consideration.展开更多
Sea ice exhibits complex mechanical properties,and no unified constitutive model currently exists.This study establishes an elastoplastic sea ice constitutive model based on non-ordinary state-based Peridynamics(PD)an...Sea ice exhibits complex mechanical properties,and no unified constitutive model currently exists.This study establishes an elastoplastic sea ice constitutive model based on non-ordinary state-based Peridynamics(PD)and the TsaiWu yield criterion,applying force state calculations to sea ice collisions while mitigating zero energy modes.A Fortran program implements the elastic-plastic constitutive equation of PD to simulate spherical ice-steel plate collisions.The program's accuracy in simulating sea ice collisions is validated through comparison with finite element results.Using the established model,this study simulates collisions between vertical structures and layer ice,analyzing the effects of impact velocity,vertical structure size,and critical elongation on sea ice load.The findings demonstrate positive correlations between collision force and impact velocity,vertical structure size,and critical elongation.At high velocities,impact significantly affects collision force,primarily following a quadratic function,while vertical structure effects exhibit a linear relationship.展开更多
In this work,the selected icebreaker model experiment is performed in a towing tank.We focus on the influence of seawater salinity on ship ice resistance in the ice floe field and the innovative ice model and ship mod...In this work,the selected icebreaker model experiment is performed in a towing tank.We focus on the influence of seawater salinity on ship ice resistance in the ice floe field and the innovative ice model and ship model test technology,including the similitude rule of ship model tests,test principles,and validation with full-scale ship data.A formula for calculating the relationship between the temperature and salinity of the water is constructed,which can be used to simulate the role of seawater in freshwater ice pools.On this basis,the effect of salinity on the resistance of ships sailing in broken ice fields is studied.A technique in which artificial ice made of polyethylene spheres is used to simulate ice resistance is proposed.With a series of ship model experiments in spherical and triangular ice fields,the effects of salinity and velocity on the ice resistance test of the ship model are analyzed.A relationship of the ice resistance of the ship model to the spherical ice field and the triangular ice field is proposed.The conversion results are consistent with onsite data of the full-size ship,which verifies the method of converting the test results of the ship model to the prototype.展开更多
Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched ...Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched marine equipment in low-temperature ice-prone waters.A computational fluid dynamics-finite element method(CFD-FEM) coupled framework was established to simulate bidirectional fluid-structure interactions during the water-exit process of a ventilated vehicle impacting ice in brash environments.Distinct evolution characteristics were revealed by comparatively analyzing the cavity,flow fields,hydrodynamic loading,structural deformation,and trajectory stability across three scenarios:ice-free,single-ice,and multi-ice.Furthermore,the position-dependent impact effects were characterized.The findings reveal that the impact,friction,and compression effects of ice induce bending and wrinkling of the shoulder cavity,aggravating its collapse and increasing the wetting of the vehicle,resulting in a substantial expansion of the high-velocity and vortex-dominated regions within the flow field,accompanied by more obvious water splashes.The impact of ice notably increases the kinetic energy dissipation of the vehicle during the cross-water stage and diminishes its motion stability.In the center-symmetric layout,the vehicle collides with ice only once,with high stress confined to the head.Conversely,the radial-offset layout causes secondary or even multiple collisions,resulting in high-stress areas on the shoulder of the vehicle,making it deflect and ultimately causing the tail cavity to tilt and become destabilized.The design of new vehicles suitable for ice-prone environments should focus on enhancing the impact toughness of the head structure and optimizing the surface shape design to improve the adaptability to low-temperature complex environments.展开更多
For ship structural design and good maneuverability in an ice-covered sea, the local and global load of ice cover on ships should be well understood. This paper reviews the extensive work done on ice loads on ships, i...For ship structural design and good maneuverability in an ice-covered sea, the local and global load of ice cover on ships should be well understood. This paper reviews the extensive work done on ice loads on ships, including： （a） Ice pressure and local load determination based on field and model tests; （b） Global ice loads on ships from full-scale field observations, model tests and numerical models under different ice conditions （level ice and pack ice） and ship operations （maneuvering and mooring）. Spe- cial attention is paid to the discrete element simulation of global ice loads on ships; and （c） Analytical solutions and numerical models of impact loads of icebergs on ships for polar navigation. Finally, research potential in these areas is discussed.展开更多
On the basis of ice- induced forced vibration model, ice- induced displacement responses of offshore fixed platforms are investigated in both time domain and frequency domain. The relationships of ice-induced displace...On the basis of ice- induced forced vibration model, ice- induced displacement responses of offshore fixed platforms are investigated in both time domain and frequency domain. The relationships of ice-induced displacement responses with ice breaking modes, ice acting directions and platform structures are analyzed and determined. The results lead to an important conclusion obtained for the first time that ice breaking frequency and the natural frequency of the first mode of the platform are the two main factors that dominate the degree of vibration. The present work provides a firm basis for both design and operation of fixed platforms against ice loading.展开更多
Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical propertie...Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method.展开更多
Ships navigating in ice-covered regions will inevitably collide with ice ridges.Compared to other ice bodies,ice ridges exhibit more complicated mechanical behaviors due to the scale and structure characteristics.In t...Ships navigating in ice-covered regions will inevitably collide with ice ridges.Compared to other ice bodies,ice ridges exhibit more complicated mechanical behaviors due to the scale and structure characteristics.In this paper,nonlinear finite element method is used to investigate the interaction between a polar ship and an ice ridge.The ice ridge is modelled as elastic-plastic material based on Drucker-Prager yield function,with the consideration of the influence of cohesion,friction angle and material hardening.The material model is developed in LS-DYNA and solved using semi-implicit mapping algorithm.The stress distribution of ice ridge and ship,and the ice load history are evaluated through the simulation of multiple collisions.In addition,parametric analysis is performed to investigate the influence of ridge thickness and impact velocity on the ice load and energy absorption.展开更多
:Merchant ships,which are quite different from icebreakers,usually require the light ice-strengthened bow under the floe-ice condition.According to ice-class B,requirements of China Classification Society(CCS),interme...:Merchant ships,which are quite different from icebreakers,usually require the light ice-strengthened bow under the floe-ice condition.According to ice-class B,requirements of China Classification Society(CCS),intermediate frames and thick hull plates are necessary for the ice belt area to resist floe-ice impact.However,due to the limited space,it is not practical to set so many intermediate longitudinals from manufacture point of view.In this paper,a modification method is proposed to solve the problem by maintaining the frame spacing and increasing the plate thickness.The aim is to make sure that the bow owns the equivalent ice-bearing capacity with the original frame spacing.At first,a bulk carrier with ice-class B is used for case study.According to the requirements of the ice class rule,a designed ice thickness is used to calculate the ice load acting on the bow area due to the impact of ice floe.Two structural models are presented to perform the strength analysis under ice load,including the out-shell plate model and the longitudinal model.The results show that increasing the plate thickness is helpful to remove the negative effect induced by enlarging the spacing of the longitudinal.A reasonable curve is presented to modify the bow for the ice-strengthened merchant ship,which shows the relationship between the increase of plate thickness and the spacing of longitudinal.Moreover,a model test of floe-ice–ship interaction is conducted to measure the dynamic ice load,based on which nonlinear dynamic FE analysis is used to verify the presented plate-thickness–longitudinal spacing curve.The results show that the proposed method can be used to improve the ice-strengthened bow structure effectively,which provides theoretical foundation to modify the requirement of CCS’s ice class rule.展开更多
To investigate the low temperature fatigue crack propagation behavior of offshore structural steel A131 under random ice loading, three ice failure modes that are commonly present in the Bohai Gulf are simulated accor...To investigate the low temperature fatigue crack propagation behavior of offshore structural steel A131 under random ice loading, three ice failure modes that are commonly present in the Bohai Gulf are simulated according to the vibration stress responses induced by real ice loading. The test data are processed by a universal software FCPUSL developed on the basis of the theory of fatigue crack propagation and statistics. The fundamental parameter controlling the fatigue crack propagation induced by random ice loading is determined to be the amplitude root mean square stress intensity factor K-arm. The test results are presented on the crack propagation diagram where the crack growth rate da/dN is described as the function of K-arm. It is evident that the ice failure modes have great influence on the fatigue crack propagation behavior of the steel in ice-induced vibration. However, some of the experimental phenomena and test results are hard to be physically explained at present. The work in this paper is an initial attempt to investigate the cause of collapse of offshore structures due to ice loading.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.U22B20126)the National Key Research and Development Program of China(Grant No.2022YFC2806100).
文摘With increasing water depth,marine drilling conductors exhibit higher slenderness ratios,significantly reducing their resistance to environmental loads in Arctic waters.These conductors,when subjected to combined wind,current,and ice loads,may experience substantial horizontal displacements and bending moments,potentially compromising off-shore operational safety and wellhead stability.Additionally,soil disturbance near the mudline diminishes the conductor’s bearing capacity,potentially rendering it inadequate for wellhead support and increasing operational risks.This study introduces a static analysis model based on plastic hinge theory to evaluate conductor survivability.The conductor analysis divides the structure into three segments:above waterline,submerged,and embedded below mudline.An idealized elastic-plastic p-y curve model characterizes soil behavior beneath the mudline,while the finite difference method(FDM)analyzes the conductor’s mechanical response under complex pile-head boundary conditions.Numerical simulations using ABAQUS validate the plastic hinge approach against conventional methods,confirming its accuracy in predicting structural performance.These results provide valuable insights for optimizing installation depths and bearing capacity designs of marine drilling conductors in ice-prone regions.
文摘Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical experimental measurement and numerical simulation pose research challenges.This study focuses on the ice load of a cylinder structure breaking upward through the ice sheet form underneath in the Small Ice Model Basin of China Ship Scientific Research Center(CSSRC SIMB).A high-speed camera system was employed to observe the ice sheet failure during the tests,in which,with the loading position as center,local radial cracks and circumferential cracks were generated.A load sensor was used to measure the overall ice load during this process.Meanwhile,a numerical model was developed using LS-DYNA for validation and comparison.With this model,numerical simulation was conducted under various ice thicknesses and upgoing speeds to analyze the instantaneous curves of ice load.The calculation results were statistically analyzed under different working conditions to determine the influence of the factors on the ice load of the cylinder.The study explores the measurement method about ice load of objects vertically breaking through model ice sheet and is expected to provide some fundamental insights into the safety design of underwater structures operating in ice waters.
基金The Special Funding for National Marine Commonwealth Industry of China under contract Nos 201105016 and 2012418007the National Natural Science Foundation of China under contract No.41176012
文摘Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields.
基金This study is financially supported by the National Natural Science Foundation of China(Grant Nos.11872136,U20A20327 and 42176241).
文摘Moored structures are suitable for operations in ice-covered regions owing to their security and efficiency.This paper aims to present a new method for simulating the ice load and mooring force on the moored structure during ice-structure interaction with a spherical Discrete Element Method(DEM).In this method,the level ice and mooring lines consist of bonded sphere elements arranged in different patterns.The level ice model has been widely validated in simulation of the ice load of fixed structures.In the mooring line simulation,a string of spherical elements was jointed with the parallel bond model to simulate the chains or cable structure.The accuracy of the mooring line model was proved by comparing the numerical results with the nonlinear FEM results and model towing experiment results.The motion of the structure was calculated in the quaternion method,considering the ice load,mooring force,and hydrodynamic force.The hydrodynamic force comprised wave-making damping,current drag,and buoyancy force.Based on the proposed model,the interaction of a semi-submersible structure with level ice was simulated,and the effect of ice thickness on the ice load was analyzed.The numerical results show that the DEM method is suitable to simulate the ice load and mooring force on moored floating structures.
文摘Ice load is one of the most important factors for design of marine stuctures in cold sea area.The designcriteria of ice loads for marine structures consist of two parts: level ice thickness and crushing strength. Due to thestrong randomness of the affecting factors on ice thickness and crushing strength, such as ice temperature,air temperature, water temperature,salinity,wind field, numerical simulation method method can not produce satisfactory results. Thispaper proposes a method of uncertainty analysis and joint probabilistic prediction of level ice thickness and crushingstrength instead of traditional ice load criteria for marine structures.
基金financially supported by the National Science Fund for Distinguished Young Scholars(Grant No.51625902)the Major Scientific and Technological Innovation Project of Shandong Province(Grant No.2019JZZY010820)+2 种基金the National Key Research and Development Program of China(Grant No.2019YFC0312404)the National Natural Science Foundation of China(Grant No.51879249)the Taishan Scholars Program of Shandong Province(Grant No.TS201511016)。
文摘This paper investigates the possibility of utilizing response from natural ice loading for modal parameter identification of real offshore platforms.The test platform is the JZ20-2 MUQ jacket platform located in the Liaodong Bay,China.A field experiment is carried out in winter season,as the platform is excited by floating ices.The feasibility is demonstrated by the acceleration response of two different segments.By the SSI-data method,the modal frequencies and damping ratios of four structural modes can be successfully identified from both segments.The estimated information from both segments is almost identical,which demonstrates that the modal identification is trustworthy.Furthermore,by taking the Jacket platform as a benchmark,the numerical performance of five popular time-domain EMA methods is systematically compared from different viewpoints.The comparisons are categorized as:(1)stochastic methods versus deterministic methods;(2)high-order methods versus low-order methods;(3)data-driven versus covariance-driven stochastic subspace identification methods.
基金This research is financially supported by the National Natural Science Foundation of China (Grant No.5989410) Key Project Foundation of the Chinese Academy of Sciences China National Offshore Oil Corporation
文摘Three types of ice loading, which are most commonly present when ice acts on structures, are chosen and simulated for use of fatigue crack propagation tests on offshore structural steel A131. The three types of ice categorized in accordance with the failure modes when acting on structures called Crushing ice, bending ice, and buckling ice, respectively. This paper presents an experimental investigation on the fatigue crack propagation behavior of widely used high strength steel A131 for offshore jackets in the loading environment of ice crushing, bending, and buckling. The test results of fatigue crack propagation in steel A131 tinder these simulated ice loading at temperature 292K are presented and analyzed in detail in this paper, The amplitude root mean square stress intensity factor is optimized to be the fundamental parameter of fatigue crack propagation for all types of ice loading histories. The results are also compared with constant amplitude fatigue crack propagation conclusions as in wave load mode, and a joint investigation on the results from ice forces, ice-induced vibrations, and ice-induced fatigue crack propagation is conducted. Conclusions are drawn for reference in structural design and material selection for offshore structures in ice environments.
基金This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement(Grant No.2017YFE0111400)the National Key R&D Program Strategic International Science and Technology Innovation Cooperation Key Specialities(Grant No.2016YFE0202700)+3 种基金the National Natural Science Foundation of China(Grant Nos.51579054 and 51639004)the Ministry of Industry and Information Technology’s High-tech Ship Research Project(Grant No.2017-614)Mr.Renwei Liu is supported by a two-year visiting student fellowship in University of California,Berkeley from Chinese Scholar Council(Grant No.201706680104)this support is gratefully acknowledged.The authors also graciously acknowledge Professor Shaofan Li of University of California,Berkeley and Fei Han of Dalian University of Technology for their guidance and fruitful discussion regarding this work.
文摘In this study,a numerical method was developed based on peridynamics to determine the ice loads for a ship navigating in level ice.Convergence analysis of threedimensional ice specimen with tensile and compression loading are carried out first.The effects of ice thickness,sailing speed,and ice properties on the mean ice loads were also investigated.It is observed that the ice fragments resulting from the icebreaking process will interact with one another as well as with the water and ship hull.The ice fragments may rotate,collide,or slide along the ship hull,and these ice fragments will eventually drift away from the ship.The key characteristics of the icebreaking process can be obtained using the peridynamic model such as the dynamic generation of cracks in the ice sheet,propagation and accumulation of ice fragments,as well as collision,rotation,and sliding of the ice fragments along the ship hull.The simulation results obtained for the ice loads and icebreaking process were validated against those determined from the Lindqvist empirical formula and there is good agreement between the results.
文摘Usually, the action of sea ice on offshore engineering structures is one of the controlling loads in cold waters engineering structure design. The reasonable selection of environmental condition and the physical mechanical properties of ice in the region are directly related to the structure design, operation and safety. In this paper, the sea ice force acting on the structure, the physical mechanical properties of ice and the selection of parameters in calculation are discussed. Some suggestions are proposed as to the calculation of various kinds of ice loads acting on the structure.
基金supported by the National Natural Science Foundation of China(50609015)
文摘Two series of model tests were performed to observe the dynamic ice loads on conical structures.The variable testing parameters include the water line diameter of the model cone and ice parameters.During small water line diameter tests,two-time breaking is found to be the typical failure of ice on steep conical structure,and also be controlled by other factors,such as ice speed and the cone angle.During big water line diameter tests,the ice sheet failed nonsimultaneously around the cone.Several independent zones of bending were found in the nonsimultaneous failure process of ice.With the increase of the ratio of D/h and the number of independent zones,the total ice force was found being gradually reduced.
基金Supported by the National Natural Science Foundation of China(Nos.52192693,52192690,52371270,U20A20327)the National Key Research and Development Program of China(Nos.2021YFC2803400).
文摘Ice-breaking methods have become increasingly significant with the ongoing development of the polar regions.Among many ice-breaking methods,ice-breaking that utilizes a moving load is unique compared with the common collision or impact methods.A moving load can generate flexural-gravity waves(FGWs),under the influence of which the ice sheet undergoes deformation and may even experience structural damage.Moving loads can be divided into above-ice loads and underwater loads.For the above-ice loads,we discuss the characteristics of the FGWs generated by a moving load acting on a complete ice sheet,an ice sheet with a crack,and an ice sheet with a lead of open water.For underwater loads,we discuss the influence on the ice-breaking characteristics of FGWs of the mode of motion,the geometrical features,and the trajectory of motion of the load.In addition to discussing the status of current research and the technical challenges of ice-breaking by moving loads,this paper also looks ahead to future research prospects and presents some preliminary ideas for consideration.
基金financially supported by the Aeronautical Science Foundation of China(Grant No.023M031077001)Shandong Provincial Natural Science Foundation(Grant No.ZR2022QE092)the Open Fund Project of Key Laboratory of Ocean Observation Technology,MNR(Grant No.2022klootA03)。
文摘Sea ice exhibits complex mechanical properties,and no unified constitutive model currently exists.This study establishes an elastoplastic sea ice constitutive model based on non-ordinary state-based Peridynamics(PD)and the TsaiWu yield criterion,applying force state calculations to sea ice collisions while mitigating zero energy modes.A Fortran program implements the elastic-plastic constitutive equation of PD to simulate spherical ice-steel plate collisions.The program's accuracy in simulating sea ice collisions is validated through comparison with finite element results.Using the established model,this study simulates collisions between vertical structures and layer ice,analyzing the effects of impact velocity,vertical structure size,and critical elongation on sea ice load.The findings demonstrate positive correlations between collision force and impact velocity,vertical structure size,and critical elongation.At high velocities,impact significantly affects collision force,primarily following a quadratic function,while vertical structure effects exhibit a linear relationship.
基金financially supported by Jiangsu Province University(High Tech Ship)Collaborative Innovation Center(Grant No.XTCXKY20230008).
文摘In this work,the selected icebreaker model experiment is performed in a towing tank.We focus on the influence of seawater salinity on ship ice resistance in the ice floe field and the innovative ice model and ship model test technology,including the similitude rule of ship model tests,test principles,and validation with full-scale ship data.A formula for calculating the relationship between the temperature and salinity of the water is constructed,which can be used to simulate the role of seawater in freshwater ice pools.On this basis,the effect of salinity on the resistance of ships sailing in broken ice fields is studied.A technique in which artificial ice made of polyethylene spheres is used to simulate ice resistance is proposed.With a series of ship model experiments in spherical and triangular ice fields,the effects of salinity and velocity on the ice resistance test of the ship model are analyzed.A relationship of the ice resistance of the ship model to the spherical ice field and the triangular ice field is proposed.The conversion results are consistent with onsite data of the full-size ship,which verifies the method of converting the test results of the ship model to the prototype.
文摘Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched marine equipment in low-temperature ice-prone waters.A computational fluid dynamics-finite element method(CFD-FEM) coupled framework was established to simulate bidirectional fluid-structure interactions during the water-exit process of a ventilated vehicle impacting ice in brash environments.Distinct evolution characteristics were revealed by comparatively analyzing the cavity,flow fields,hydrodynamic loading,structural deformation,and trajectory stability across three scenarios:ice-free,single-ice,and multi-ice.Furthermore,the position-dependent impact effects were characterized.The findings reveal that the impact,friction,and compression effects of ice induce bending and wrinkling of the shoulder cavity,aggravating its collapse and increasing the wetting of the vehicle,resulting in a substantial expansion of the high-velocity and vortex-dominated regions within the flow field,accompanied by more obvious water splashes.The impact of ice notably increases the kinetic energy dissipation of the vehicle during the cross-water stage and diminishes its motion stability.In the center-symmetric layout,the vehicle collides with ice only once,with high stress confined to the head.Conversely,the radial-offset layout causes secondary or even multiple collisions,resulting in high-stress areas on the shoulder of the vehicle,making it deflect and ultimately causing the tail cavity to tilt and become destabilized.The design of new vehicles suitable for ice-prone environments should focus on enhancing the impact toughness of the head structure and optimizing the surface shape design to improve the adaptability to low-temperature complex environments.
基金supported by the Ocean Public Welfare Scientific Research Project of China (Grant No. 201105016,2012418007)the National Natural Science Foundation of China (Grant No.41176012)the American Bureau of Shipping (ABS)
文摘For ship structural design and good maneuverability in an ice-covered sea, the local and global load of ice cover on ships should be well understood. This paper reviews the extensive work done on ice loads on ships, including： （a） Ice pressure and local load determination based on field and model tests; （b） Global ice loads on ships from full-scale field observations, model tests and numerical models under different ice conditions （level ice and pack ice） and ship operations （maneuvering and mooring）. Spe- cial attention is paid to the discrete element simulation of global ice loads on ships; and （c） Analytical solutions and numerical models of impact loads of icebergs on ships for polar navigation. Finally, research potential in these areas is discussed.
基金The project was financially supported by China Postdoctor Science Foundationthe Key Project Foundation of the Chinese Academy of Sciences and China National Offshore Oil Corporation
文摘On the basis of ice- induced forced vibration model, ice- induced displacement responses of offshore fixed platforms are investigated in both time domain and frequency domain. The relationships of ice-induced displacement responses with ice breaking modes, ice acting directions and platform structures are analyzed and determined. The results lead to an important conclusion obtained for the first time that ice breaking frequency and the natural frequency of the first mode of the platform are the two main factors that dominate the degree of vibration. The present work provides a firm basis for both design and operation of fixed platforms against ice loading.
基金This work was financially supported by the National High Technology Research and Development Programof China(863Program,Grant No.2001AA602015)the National Natural Science Foundation of China(Grant No.50578028and No.10721062)the Programfor NewCentury Excellent Talents in University.
文摘Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method.
文摘Ships navigating in ice-covered regions will inevitably collide with ice ridges.Compared to other ice bodies,ice ridges exhibit more complicated mechanical behaviors due to the scale and structure characteristics.In this paper,nonlinear finite element method is used to investigate the interaction between a polar ship and an ice ridge.The ice ridge is modelled as elastic-plastic material based on Drucker-Prager yield function,with the consideration of the influence of cohesion,friction angle and material hardening.The material model is developed in LS-DYNA and solved using semi-implicit mapping algorithm.The stress distribution of ice ridge and ship,and the ice load history are evaluated through the simulation of multiple collisions.In addition,parametric analysis is performed to investigate the influence of ridge thickness and impact velocity on the ice load and energy absorption.
基金the National Natural Science Foundation of China(No.51809124)the Jiangsu Natural Science Foundation Youth Project(No.BK20170576)the Research Foundation of State Key Laboratory of Ocean Engineering of Shanghai Jiao Tong University(Nos.1704 and 1807)。
文摘:Merchant ships,which are quite different from icebreakers,usually require the light ice-strengthened bow under the floe-ice condition.According to ice-class B,requirements of China Classification Society(CCS),intermediate frames and thick hull plates are necessary for the ice belt area to resist floe-ice impact.However,due to the limited space,it is not practical to set so many intermediate longitudinals from manufacture point of view.In this paper,a modification method is proposed to solve the problem by maintaining the frame spacing and increasing the plate thickness.The aim is to make sure that the bow owns the equivalent ice-bearing capacity with the original frame spacing.At first,a bulk carrier with ice-class B is used for case study.According to the requirements of the ice class rule,a designed ice thickness is used to calculate the ice load acting on the bow area due to the impact of ice floe.Two structural models are presented to perform the strength analysis under ice load,including the out-shell plate model and the longitudinal model.The results show that increasing the plate thickness is helpful to remove the negative effect induced by enlarging the spacing of the longitudinal.A reasonable curve is presented to modify the bow for the ice-strengthened merchant ship,which shows the relationship between the increase of plate thickness and the spacing of longitudinal.Moreover,a model test of floe-ice–ship interaction is conducted to measure the dynamic ice load,based on which nonlinear dynamic FE analysis is used to verify the presented plate-thickness–longitudinal spacing curve.The results show that the proposed method can be used to improve the ice-strengthened bow structure effectively,which provides theoretical foundation to modify the requirement of CCS’s ice class rule.
文摘To investigate the low temperature fatigue crack propagation behavior of offshore structural steel A131 under random ice loading, three ice failure modes that are commonly present in the Bohai Gulf are simulated according to the vibration stress responses induced by real ice loading. The test data are processed by a universal software FCPUSL developed on the basis of the theory of fatigue crack propagation and statistics. The fundamental parameter controlling the fatigue crack propagation induced by random ice loading is determined to be the amplitude root mean square stress intensity factor K-arm. The test results are presented on the crack propagation diagram where the crack growth rate da/dN is described as the function of K-arm. It is evident that the ice failure modes have great influence on the fatigue crack propagation behavior of the steel in ice-induced vibration. However, some of the experimental phenomena and test results are hard to be physically explained at present. The work in this paper is an initial attempt to investigate the cause of collapse of offshore structures due to ice loading.
