The selective hydrogenation of halogenated nitrobenzene over noble metal catalysts(Pd, Pt, and Ir) has attracted much attention owing to its high efficiency and environmental friendliness. However, the effect of size ...The selective hydrogenation of halogenated nitrobenzene over noble metal catalysts(Pd, Pt, and Ir) has attracted much attention owing to its high efficiency and environmental friendliness. However, the effect of size on the catalytic performance varies among different metal catalysts. In this study, sub-nano(<3 nm) Ir and Pd particles were prepared, and their catalytic properties for hydrogenation of halogenated nitrobenzene were evaluated.Results show that high selectivity(N 99%) was achieved over small Ir nanoparticles, in which the selectivity over the Pd with same size was much lower than that on Ir nanoparticles. Meanwhile, Ir and Pd have different hydrogen consumption rates and reaction rates. Density functional theory calculations showed that p-chloronitrobenzene(CNB) has different adsorption properties on Ir and Pd. The distance between oxygen(cholorine) and Ir is much shorter(longer) than that between oxygen and Pd. The reaction barriers of dechlorination of p-CNB and p-chloroaniline over different Ir models are much larger than those on Pd. Especially,lower coordination of Ir leads to larger barriers of dechlorination reaction. These theoretical results explain the difference between Ir and Pd on hydrogenation of halogenated nitrobenzene.展开更多
Developing biomass platform compounds into high value-added chemicals is a key step in renewable resource utilization.Herein,we report porous carbon-supported Ni-ZnO nanoparticles catalyst(Ni-ZnO/AC)synthesized via lo...Developing biomass platform compounds into high value-added chemicals is a key step in renewable resource utilization.Herein,we report porous carbon-supported Ni-ZnO nanoparticles catalyst(Ni-ZnO/AC)synthesized via low-temperature coprecipitation,exhibiting excellent performance for the selective hydrogenation of 5-hydroxymethylfurfural(HMF).A linear correlation is first observed between solvent polarity(E_(T)(30))and product selectivity within both polar aprotic and protic solvent classes,suggesting that solvent properties play a vital role in directing reaction pathways.Among these,1,4-dioxane(aprotic)favors the formation of 2,5-bis(hydroxymethyl)furan(BHMF)with 97.5%selectivity,while isopropanol(iPrOH,protic)promotes 2,5-dimethylfuran production with up to 99.5%selectivity.Mechanistic investigations further reveal that beyond polarity,proton-donating ability is critical in facilitating hydrodeoxygenation.iPrOH enables a hydrogen shuttle mechanism where protons assist in hydroxyl group removal,lowering the activation barrier.In contrast,1,4-dioxane,lacking hydrogen bond donors,stabilizes BHMF and hinders further conversion.Density functional theory calculations confirm a lower activation energy in iPrOH(0.60 eV)compared to 1,4-dioxane(1.07 eV).This work offers mechanistic insights and a practical strategy for solvent-mediated control of product selectivity in biomass hydrogenation,highlighting the decisive role of solvent-catalyst-substrate interactions.展开更多
Selective hydrogenation of substituted nitroarenes is an important reaction to obtain amines.Supported metal catalysts are wildly used in this reaction because the surface structure of supports can tune the properties...Selective hydrogenation of substituted nitroarenes is an important reaction to obtain amines.Supported metal catalysts are wildly used in this reaction because the surface structure of supports can tune the properties of the supported metal nanoparticles(NPs)and promote the selectivity to amines.Herein,Pt NPs were immobilized on Fe OOH,Fe_(3)O_(4)andα-Fe_2O_(3)nanorods to synthesize a series of iron compounds supported Pt catalysts by liquid phase reduction method.Chemoselective hydrogenation of 3-nitrostyrene to 3-aminostyrene was used as probe reaction to evaluate the performance of the catalysts.The results show that Pt/Fe OOH exhibits the highest selectivity and activity.Fe OOH support with pores and-OH groups can tune the electronic structure of Pt NPs.The positive charge of Pt NPs supported on Fe OOH is key factor for improving the catalytic performance.展开更多
Selective hydrogenation of phenol to cyclohexanone is intriguing in chemical industry.Though a few catalysts with promising performances have been developed in recent years,the basic principle for catalyst design is s...Selective hydrogenation of phenol to cyclohexanone is intriguing in chemical industry.Though a few catalysts with promising performances have been developed in recent years,the basic principle for catalyst design is still missing owing to the unclear catalytic mechanism.This work tries to unravel the mechanism of phenol hydro-genation and the reasons causing the selectivity discrepancy on noble metal catalysts under mild conditions.Results show that different reaction pathways always firstly converge to the formation of cyclohexanone under mild conditions.The selectivity discrepancy mainly depends on the activity for cyclohexanone sequential hy-drogenation,in which two factors are found to be responsible,i.e.the hydrogenation energy barrier and the competitive chemisorption between phenol and cyclohexanone,if the specific co-catalyzing effect of H 2 O on Ru is not considered.Based on the above results,a quantitative descriptor,E b(one/pl)/E a,in which E a can be further correlated to the d band center of the noble metal catalyst,is proposed by the first time to roughly evaluate and predict the selectivity to cyclohexanone for catalyst screening.展开更多
Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethyle...Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.展开更多
The selective hydrogenation ofα,β-unsaturated aldehydes/ketones enables precise control over product structures and properties by regulating hydrogen transport pathways and bond cleavage sequences to selectively red...The selective hydrogenation ofα,β-unsaturated aldehydes/ketones enables precise control over product structures and properties by regulating hydrogen transport pathways and bond cleavage sequences to selectively reduce C=C or C=O bonds while preserving other functional groups within the molecule.This approach serves as a critical strategy for the directional synthesis of high-value molecules.However,achieving such selectivity remains challenging due to the thermodynamic equilibrium and kinetic competition between C=O and C=C bonds inα,β-unsaturated systems.Consequently,constructing precisely targeted catalytic systems is essential to overcome these limitations,offering both fundamental scientific significance and industrial application potential.Metal-organic frameworks(MOFs)and their derivatives have emerged as innovative platforms for designing such systems,owing to their programmable topology,tunable pore microenvironments,spatially controllable active sites,and modifiable electronic structures.This review systematically summarizes the research progress of MOF-based catalysts for selec-tive hydrogenation ofα,β-unsaturated aldehydes/ketones in the last decade,with emphasis on the design strategy,conformational relationship,and catalytic mechanism,aiming to provide new ideas for the design of targeted catalyt-ic systems for the selective hydrogenation ofα,β-unsaturated aldehydes/ketones.展开更多
The electrochemical hydrogenation(ECH)of 5-hydroxymethylfurfural(HMF)to 2,5-dihydroxymethylfuran(DHMF)represents a pivotal pathway for the electrocatalytic upgrading of biomass-based organic small molecules,offering s...The electrochemical hydrogenation(ECH)of 5-hydroxymethylfurfural(HMF)to 2,5-dihydroxymethylfuran(DHMF)represents a pivotal pathway for the electrocatalytic upgrading of biomass-based organic small molecules,offering significant reductions in energy consumption while producing value-added chemicals.The conversion of HMF to DHMF is challenging due to the high reduction potential and complex intermediates of HMF ECH under neutral environment.Also,the total efficiency is hindered by sluggish anodic oxygen evolution reaction(OER)kinetics.Herein,we report a synthesis of highly alloyed Pd-Pt bimetallene(Pd3Pt1 BML)for HMF ECH coupled with formic acid oxidation reaction(FAOR).Through a combination of in-situ Raman spectroscopy,electron paramagnetic resonance analysis,and theoretical calculations,we elucidate that the HMF adsorption on Pd atoms,strategically separated by Pt atoms,is weakened compared to pure Pd surfaces.Additionally,Pt atoms serve as crucial providers of active hydrogen to neighboring Pd atoms,synergistically enhancing the reaction kinetics of HMF conversion with a Faradaic efficiency>93%.Meanwhile,the atomically dispersed Pt atoms endow Pd_(3)Pt_(1) BML with high electrochemical performance for the direct pathway of FAOR at the anode.As a result,a FAOR-assisted HMF ECH system equipped with bifunctional Pd3Pt1 BML achieves the energy-efficient conversion of HMF to DHMF at electrolysis voltage of 0.72 V at 10 mA cm^(–2).This work provides insights into the rational design of bifunctional catalysts featuring two distinct types of active sites for advanced energy electrocatalysis and ECH.展开更多
The aqueous-phase hydrogenation of furfural to furfuryl alcohol using non-noble metal catalysts is constrained by the low activity of catalysts,necessitating high temperatures and high hydrogen pressures,and posing ch...The aqueous-phase hydrogenation of furfural to furfuryl alcohol using non-noble metal catalysts is constrained by the low activity of catalysts,necessitating high temperatures and high hydrogen pressures,and posing challenges in controlling furfuryl alcohol selectivity.Herein,a Co nanoparticle catalyst supported on nitrogendoped carbon derived from MOFs is reported,which adopts a synergistic strategy to enhance catalytic perfor-mance.The nitrogen doping simultaneously promotes hydrogen spillover on the catalyst surface and reduces surface acidity,thereby suppressing acid-catalyzed side reactions.This dual function enables the selective hy-drogenation of-C=O groups to-CH_(2)OH groups in water under mild conditions.Furfural reached 98%con-version with 95%selectivity of furfuryl alcohol at 135℃ and under hydrogen pressure close to atmospheric(0.4 MPa)in 2 h.This study allows a low energy-consuming method for producing furfuryl alcohol from hemicellulose-derived furfural,and provides a promising strategy for the conversion of renewable biomassderived compounds into high value-added chemicals.展开更多
Hierarchical Ni/ZSM-22-SBA-15 meso-microporous catalysts(Ni/ZS-x)with different acid properties and diffusion characteristics(acid-diffusion)properties were synthesized successfully and applied to the production of hi...Hierarchical Ni/ZSM-22-SBA-15 meso-microporous catalysts(Ni/ZS-x)with different acid properties and diffusion characteristics(acid-diffusion)properties were synthesized successfully and applied to the production of high-quality jet fuel by the efficient one-step hydrogenation(hydrodeoxygenation,isomerization,and cracking)of oleic acid.The acid-diffusion properties of the catalysts are modulated by tuning the ZSM-22 seed content,and their effects on the hydrogenation reactions were investigated.Acid properties affect the extent of isomerization and cleavage reactions,whereas diffusion properties affect the accessibility of active centers.The balanced acid-diffusion properties are conducive to efficient hydrogenation reactions of oleic acid.The optimal Ni/ZS-3 exhibits the highest jet fuel yield(56.3%,340°C)and superior iso/n-alkane ratio(i/n=3.12)because of its well-balanced acid-diffusion properties.Besides,the possible hydrogenation mechanism of oleic acid is proposed.展开更多
Metal oxides as support for constructing precious metal single-atom catalysts hold great promise for a wide range of industrial applications,but achieving a high-loading of thermally stable metal single atoms on such ...Metal oxides as support for constructing precious metal single-atom catalysts hold great promise for a wide range of industrial applications,but achieving a high-loading of thermally stable metal single atoms on such supports has been challenging.Herein,we report an innovative strategy for the fabrication of high-density single-atoms(Rh,Ru,Pd)catalysts on CaAl-layered double hydroxides(CaAl-LDH)via isomorphous substitution.The Rh species have occupied Ca^(2+)vacancies within CaAl-LDH laminate by ion-exchange,facilitating a substantial loading of isolated Rh single-atoms.Such catalysts displayed superior performance in the selective hydrogenation to quinoline,pivotal for liquid organic hydrogen storage,and the universality for the hydrogenation of N-heterocyclic aromatic hydrocarbons was also verified.Combining the experimental results and density functional theory calculations,the pathway of quinoline hydrogenation over Rh1CaAl-LDH was proposed.This synthetic strategy marks a significant advancement in the field of single-atom catalysts,expanding their horizons in green chemical processes.展开更多
Selective hydrogenation of furfural to furfuryl alcohol is a great challenge in the hydrogenation field due to thermodynamic preference for hydrogenation of C=C over C=O.Herein,a novel Al_(2)O_(3)/C-u hybrid catalyst,...Selective hydrogenation of furfural to furfuryl alcohol is a great challenge in the hydrogenation field due to thermodynamic preference for hydrogenation of C=C over C=O.Herein,a novel Al_(2)O_(3)/C-u hybrid catalyst,composed of N-modified dendritic carbon networks supporting Al_(2)O_(3)nanoparticles,was successfully prepared via carbonizing the freeze-dried gel from spontaneous cross-linking of alginate,Al3+and urea.The obtained carbon-supported Al_(2)O_(3)hybrid catalyst has a high ratio (31%) of Al species in pentahedral-coordinated state.The introduction of urea enhances the surface N content,the ratio of pyrrolic N,and specific surface area of catalyst,leading to improved adsorption capacity of C=O and the accessibility of active sites.In the furfural hydrogenation reaction with isopropyl alcohol as hydrogen donor,Al_(2)O_(3)/C-u catalyst achieved a 90%conversion of furfural with 98.0% selectivity to furfuryl alcohol,outperforming that of commercial γ-Al_(2)O_(3).Moreover,Al_(2)O_(3)/C-u demonstrates excellent catalytic stability in the recycling tests attributed to the synergistic effect of abundant weak Lewis acid sites and the anchoring effect of the carbon network on Al_(2)O_(3)nanoparticles.This work provides an innovative and facile strategy for fabrication of carbon-supported Al_(2)O_(3)hybrid catalysts with rich AlVspecies,serving as a high selective hydrogenation catalyst through MPV reaction route.展开更多
Metal hydrides with high hydrogen density provide promising hydrogen storage paths for hydrogen transportation.However,the requirement of highly pure H_(2)for re-hydrogenation limits its wide application.Here,amorphou...Metal hydrides with high hydrogen density provide promising hydrogen storage paths for hydrogen transportation.However,the requirement of highly pure H_(2)for re-hydrogenation limits its wide application.Here,amorphous Al_(2)O_(3)shells(10 nm)were deposited on the surface of highly active hydrogen storage material particles(MgH_(2)-ZrTi)by atomic layer deposition to obtain MgH_(2)-ZrTi@Al_(2)O_(3),which have been demonstrated to be air stable with selective adsorption of H_(2)under a hydrogen atmosphere with different impurities(CH_(4),O_(2),N_(2),and CO_(2)).About 4.79 wt%H_(2)was adsorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)at 75℃under 10%CH_(4)+90%H_(2)atmosphere within 3 h with no kinetic or density decay after 5 cycles(~100%capacity retention).Furthermore,about 4 wt%of H_(2)was absorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)under 0.1%O_(2)+0.4%N_(2)+99.5%H_(2)and 0.1%CO_(2)+0.4%N_(2)+99.5%H_(2)atmospheres at 100℃within 0.5 h,respectively,demonstrating the selective hydrogen absorption of MgH_(2)-ZrTi@10nmAl_(2)O_(3)in both oxygen-containing and carbon dioxide-containing atmospheres hydrogen atmosphere.The absorption and desorption curves of MgH_(2)-ZrTi@10nmAl_(2)O_(3)with and without absorption in pure hydrogen and then in 21%O_(2)+79%N_(2)for 1 h were found to overlap,further confirming the successful shielding effect of Al_(2)O_(3)shells against O_(2)and N_(2).The MgH_(2)-ZrTi@10nmAl_(2)O_(3)has been demonstrated to be air stable and have excellent selective hydrogen absorption performance under the atmosphere with CH_(4),O_(2),N_(2),and CO_(2).展开更多
Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization met...Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.展开更多
A catalyst consisting of platinum nanoparticles on a ZIF-8 support（Pt@ZIF-8） was synthesized in a straightforward one-step procedure,by adding a nanostructured platinum sol during the formation of ZIF-8 at room temp...A catalyst consisting of platinum nanoparticles on a ZIF-8 support（Pt@ZIF-8） was synthesized in a straightforward one-step procedure,by adding a nanostructured platinum sol during the formation of ZIF-8 at room temperature.Pt@ZIF-8 was highly porous and well crystallized.The Pt nanoparticles were well dispersed within the ZIF-8 support.In the hydrogenation of 1,4-butynediol,Pt@ZIF-8 exhibited high activity,excellent selectivity for 1,4-butenediol of greater than 94%,and reusability.The Pt@ZIF-8 catalyst did not require further additives.The favorable catalytic performance was attributed primarily to the modification of the ZIF-8 support by the platinum nanoparticles.展开更多
The IB metal(Au,Ag and Cu)alloyed Pd single atom catalysts had been proved to be efficient in promoting the selectivity for hydrogenation of acetylene to ethylene.As a base metal in the same group as Pd,the Ni-based c...The IB metal(Au,Ag and Cu)alloyed Pd single atom catalysts had been proved to be efficient in promoting the selectivity for hydrogenation of acetylene to ethylene.As a base metal in the same group as Pd,the Ni-based catalysts are also active for hydrogenation reactions.Herein,the effects of the IB metals on the Ni/SiO2 catalyst for the selective hydrogenation of acetylene were systematically studied.Different from the Pd/SiO2 catalyst,the monometallic Ni/SiO2 catalyst is not active at low temperatures.The addition of the IB metals to the Ni/SiO2 catalysts can greatly enhance the activity.Besides,the catalytic activity of the AuNix/SiO2 and CuNix/SiO2 catalysts increase with the reduction temperature,while the AgNix/SiO2 catalysts are not sensitive to the pretreatment temperature.The origin of the effect of the different IB metals on the Ni-based catalysts for selective hydrogenation of acetylene is discussed based on the characterizations by XRD,TPR and microcalorimetric measurements.展开更多
Conversion of alkynes to alkenes by photocatalysis has inspired extensive interest but it is still challenging to obtain both high conversion and selectivity.Here we first demonstrate the photocatalytic conversion of ...Conversion of alkynes to alkenes by photocatalysis has inspired extensive interest but it is still challenging to obtain both high conversion and selectivity.Here we first demonstrate the photocatalytic conversion of phenylacetylene(PLE)to styrene(STE)with both high conversion and selectivity by using the titania(TiO2)supported platinum(Pt)as photocatalyst under 385 nm monochromatic light irradiation.It is demonstrated that the conversion rate of PLE is strongly dependent on the content of Pt cocatalyst loaded on the surface of TiO2.Based on our optimization,the conversion of PLE and the selectivity towards STE on the 1 wt%Pt/TiO2 photocatalyst can unexpectedly reach as high as 92.4%and 91.3%,respectively.The highly selective photocatalytic hydrogenation can well be extended to the conversion of other typical alkynes to alkenes,demonstrating the generality of selective hydrogenation of C≡C over the Pt/TiO2 photocatalyst.展开更多
Cyclohexanol is an important intermediate in the synthesis of Nylon-6 and plasticizers. In this work,cobalt oxide nanoparticles（NPs） supported on porous carbon（Co Ox@CN） were fabricated by one-pot method and the h...Cyclohexanol is an important intermediate in the synthesis of Nylon-6 and plasticizers. In this work,cobalt oxide nanoparticles（NPs） supported on porous carbon（Co Ox@CN） were fabricated by one-pot method and the hybrids could efficiently and selectively hydrogenate phenol to cyclohexanol with a high yield of 98%. The high catalytic performance of Co Ox@CN was associate with the high surface area（340 m2/g） and uniformly dispersed NPs. Furthurmore, by detailed analysing the relationship between catalytic activity and catalysts composition, it clearly indicated that the Co3O4 in Co Ox@CN played an important role for the adsorption and activation of phenol and the in situ gernerated Co was responsible for hydrogen adsorption and dissociation. These findings provide a fundamental insight into the real active sites in hydrogenation of phenol using Co-based catalysts.展开更多
The selective hydrogenation of phenol to cyclohexanone is an important process in the chemical industry.However,achieving high selectivity at high conversion rates is highly challenging,particularly under continuous r...The selective hydrogenation of phenol to cyclohexanone is an important process in the chemical industry.However,achieving high selectivity at high conversion rates is highly challenging,particularly under continuous reaction conditions.Here,we found that the presence of Na alkaline additives(NaX,X=CO3^2–,HCO^3–,or OH^–)on Pd/Al2O3 not only promoted the phenol conversion from 8.3%to>99%but also increased the cyclohexanone selectivity from 89%to>97%during the continuous hydrogenation of phenol on a fixed bed reactor.After 1200 h of continuous reaction,no activity or selectivity attenuation was observed and the turnover number was approximately 2.9×10^5.Density functional theory calculations,spectroscopic,and dynamics studies demonstrated that the addition of NaX greatly promoted phenol adsorption and hydrogen activation,thereby improving catalytic activity.Simultaneously,the formation of a“-C=O-Na-”intermediate inhibited the excessive hydrogenation and intermolecular coupling of cyclohexanone,leading to high selectivity.展开更多
The effect of La on the performance of a supported RuB amorphous alloy catalyst for benzene selective hydrogenation was studied by means of activity and selectivity tests, such as HRTEM, SAED, XPS, and XRD. The result...The effect of La on the performance of a supported RuB amorphous alloy catalyst for benzene selective hydrogenation was studied by means of activity and selectivity tests, such as HRTEM, SAED, XPS, and XRD. The results show that the addition of La to RuB amorphous alloy catalyst can evidently increase the activity and improve the thermal stability of RuB amorphous alloy to refrain its crystallization. The promoting effect of La on the activity of RuB amorphous alloy catalyst is because of the high dispersion of the active components.展开更多
An efficient heterogeneous catalyst,Pd@MIL‐101(Cr)‐NH2,is prepared through a direct pathway of anionic exchange followed by hydrogen reduction with amino‐containing MIL‐101as the host matrix.The composite is therm...An efficient heterogeneous catalyst,Pd@MIL‐101(Cr)‐NH2,is prepared through a direct pathway of anionic exchange followed by hydrogen reduction with amino‐containing MIL‐101as the host matrix.The composite is thermally stable up to350°C and the Pd nanoparticles uniformly disperse on the matal organic framework(MOF)support,which are attributed to the presence of the amino groups in the frameworks of MIL‐101(Cr)‐NH2.The selective hydrogenation of biomass‐based furfural to tetrahydrofurfuryl alcohol is investigated by using this multifunctional catalyst Pd@MIL‐101(Cr)‐NH2in water media.A complete hydrogenation of furfural is achieved at a low temperature of40°C with the selectivity of tetrahydrofurfuryl alcohol close to100%.The amine‐functionalized MOF improves the hydrogen bonding interactions between the intermediate furfuryl alcohol and the support,which is conducive for the further hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol in good coordination with the metal sites.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.21473159 and91334013)
文摘The selective hydrogenation of halogenated nitrobenzene over noble metal catalysts(Pd, Pt, and Ir) has attracted much attention owing to its high efficiency and environmental friendliness. However, the effect of size on the catalytic performance varies among different metal catalysts. In this study, sub-nano(<3 nm) Ir and Pd particles were prepared, and their catalytic properties for hydrogenation of halogenated nitrobenzene were evaluated.Results show that high selectivity(N 99%) was achieved over small Ir nanoparticles, in which the selectivity over the Pd with same size was much lower than that on Ir nanoparticles. Meanwhile, Ir and Pd have different hydrogen consumption rates and reaction rates. Density functional theory calculations showed that p-chloronitrobenzene(CNB) has different adsorption properties on Ir and Pd. The distance between oxygen(cholorine) and Ir is much shorter(longer) than that between oxygen and Pd. The reaction barriers of dechlorination of p-CNB and p-chloroaniline over different Ir models are much larger than those on Pd. Especially,lower coordination of Ir leads to larger barriers of dechlorination reaction. These theoretical results explain the difference between Ir and Pd on hydrogenation of halogenated nitrobenzene.
基金the National Nature Science Foundation of China for Excellent Young Scientists Fund(32222058)Fundamental Research Foundation of CAF(CAFYBB2022QB001).
文摘Developing biomass platform compounds into high value-added chemicals is a key step in renewable resource utilization.Herein,we report porous carbon-supported Ni-ZnO nanoparticles catalyst(Ni-ZnO/AC)synthesized via low-temperature coprecipitation,exhibiting excellent performance for the selective hydrogenation of 5-hydroxymethylfurfural(HMF).A linear correlation is first observed between solvent polarity(E_(T)(30))and product selectivity within both polar aprotic and protic solvent classes,suggesting that solvent properties play a vital role in directing reaction pathways.Among these,1,4-dioxane(aprotic)favors the formation of 2,5-bis(hydroxymethyl)furan(BHMF)with 97.5%selectivity,while isopropanol(iPrOH,protic)promotes 2,5-dimethylfuran production with up to 99.5%selectivity.Mechanistic investigations further reveal that beyond polarity,proton-donating ability is critical in facilitating hydrodeoxygenation.iPrOH enables a hydrogen shuttle mechanism where protons assist in hydroxyl group removal,lowering the activation barrier.In contrast,1,4-dioxane,lacking hydrogen bond donors,stabilizes BHMF and hinders further conversion.Density functional theory calculations confirm a lower activation energy in iPrOH(0.60 eV)compared to 1,4-dioxane(1.07 eV).This work offers mechanistic insights and a practical strategy for solvent-mediated control of product selectivity in biomass hydrogenation,highlighting the decisive role of solvent-catalyst-substrate interactions.
基金the financial support provided by the National Natural Science Foundation of China(Nos.22072164,21773269,51932005 and 21761132025)the Liao Ning Revitalization Talents Program(No.XLYC1807175)。
文摘Selective hydrogenation of substituted nitroarenes is an important reaction to obtain amines.Supported metal catalysts are wildly used in this reaction because the surface structure of supports can tune the properties of the supported metal nanoparticles(NPs)and promote the selectivity to amines.Herein,Pt NPs were immobilized on Fe OOH,Fe_(3)O_(4)andα-Fe_2O_(3)nanorods to synthesize a series of iron compounds supported Pt catalysts by liquid phase reduction method.Chemoselective hydrogenation of 3-nitrostyrene to 3-aminostyrene was used as probe reaction to evaluate the performance of the catalysts.The results show that Pt/Fe OOH exhibits the highest selectivity and activity.Fe OOH support with pores and-OH groups can tune the electronic structure of Pt NPs.The positive charge of Pt NPs supported on Fe OOH is key factor for improving the catalytic performance.
基金This work was supported by Financial support from the National Natural Science Foundation of China(21908189,21872121)the National Key R&D Program of China(2016YFA0202900)+1 种基金the Key Program supportedby theNaturalScience Foundationof ZhejiangProvince,China(LZ18B060002)the Key R&D Project of Zhejiang Province(2020C01133).
文摘Selective hydrogenation of phenol to cyclohexanone is intriguing in chemical industry.Though a few catalysts with promising performances have been developed in recent years,the basic principle for catalyst design is still missing owing to the unclear catalytic mechanism.This work tries to unravel the mechanism of phenol hydro-genation and the reasons causing the selectivity discrepancy on noble metal catalysts under mild conditions.Results show that different reaction pathways always firstly converge to the formation of cyclohexanone under mild conditions.The selectivity discrepancy mainly depends on the activity for cyclohexanone sequential hy-drogenation,in which two factors are found to be responsible,i.e.the hydrogenation energy barrier and the competitive chemisorption between phenol and cyclohexanone,if the specific co-catalyzing effect of H 2 O on Ru is not considered.Based on the above results,a quantitative descriptor,E b(one/pl)/E a,in which E a can be further correlated to the d band center of the noble metal catalyst,is proposed by the first time to roughly evaluate and predict the selectivity to cyclohexanone for catalyst screening.
基金supported by National Natural Science Foundation of China (No.22102147 and 22002151)State Key Laboratory of Chemical Engineering (No.SKL-ChE-22A02)+2 种基金Zhejiang Provincial Natural Science Foundation of China under Grant No.LQ21B030009the Strategic Priority Research Program of the Chinese Academy of Sciences (No.XDA29050300)Qinchuang Yuan high-level innovation and entrepreneurship talents implementing project (No.QCYRCXM-2022-177)。
文摘Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.
文摘The selective hydrogenation ofα,β-unsaturated aldehydes/ketones enables precise control over product structures and properties by regulating hydrogen transport pathways and bond cleavage sequences to selectively reduce C=C or C=O bonds while preserving other functional groups within the molecule.This approach serves as a critical strategy for the directional synthesis of high-value molecules.However,achieving such selectivity remains challenging due to the thermodynamic equilibrium and kinetic competition between C=O and C=C bonds inα,β-unsaturated systems.Consequently,constructing precisely targeted catalytic systems is essential to overcome these limitations,offering both fundamental scientific significance and industrial application potential.Metal-organic frameworks(MOFs)and their derivatives have emerged as innovative platforms for designing such systems,owing to their programmable topology,tunable pore microenvironments,spatially controllable active sites,and modifiable electronic structures.This review systematically summarizes the research progress of MOF-based catalysts for selec-tive hydrogenation ofα,β-unsaturated aldehydes/ketones in the last decade,with emphasis on the design strategy,conformational relationship,and catalytic mechanism,aiming to provide new ideas for the design of targeted catalyt-ic systems for the selective hydrogenation ofα,β-unsaturated aldehydes/ketones.
文摘The electrochemical hydrogenation(ECH)of 5-hydroxymethylfurfural(HMF)to 2,5-dihydroxymethylfuran(DHMF)represents a pivotal pathway for the electrocatalytic upgrading of biomass-based organic small molecules,offering significant reductions in energy consumption while producing value-added chemicals.The conversion of HMF to DHMF is challenging due to the high reduction potential and complex intermediates of HMF ECH under neutral environment.Also,the total efficiency is hindered by sluggish anodic oxygen evolution reaction(OER)kinetics.Herein,we report a synthesis of highly alloyed Pd-Pt bimetallene(Pd3Pt1 BML)for HMF ECH coupled with formic acid oxidation reaction(FAOR).Through a combination of in-situ Raman spectroscopy,electron paramagnetic resonance analysis,and theoretical calculations,we elucidate that the HMF adsorption on Pd atoms,strategically separated by Pt atoms,is weakened compared to pure Pd surfaces.Additionally,Pt atoms serve as crucial providers of active hydrogen to neighboring Pd atoms,synergistically enhancing the reaction kinetics of HMF conversion with a Faradaic efficiency>93%.Meanwhile,the atomically dispersed Pt atoms endow Pd_(3)Pt_(1) BML with high electrochemical performance for the direct pathway of FAOR at the anode.As a result,a FAOR-assisted HMF ECH system equipped with bifunctional Pd3Pt1 BML achieves the energy-efficient conversion of HMF to DHMF at electrolysis voltage of 0.72 V at 10 mA cm^(–2).This work provides insights into the rational design of bifunctional catalysts featuring two distinct types of active sites for advanced energy electrocatalysis and ECH.
基金supported by National Natural Science Foundation of China(22379131,22278049,22278049,and U24A20559)China Postdoctoral Science Foundation(2023M733216)+1 种基金Henan Science and Technology Department(242300421355)the Dalian High-Level Talent Innovation Program(2024RJ017).
文摘The aqueous-phase hydrogenation of furfural to furfuryl alcohol using non-noble metal catalysts is constrained by the low activity of catalysts,necessitating high temperatures and high hydrogen pressures,and posing challenges in controlling furfuryl alcohol selectivity.Herein,a Co nanoparticle catalyst supported on nitrogendoped carbon derived from MOFs is reported,which adopts a synergistic strategy to enhance catalytic perfor-mance.The nitrogen doping simultaneously promotes hydrogen spillover on the catalyst surface and reduces surface acidity,thereby suppressing acid-catalyzed side reactions.This dual function enables the selective hy-drogenation of-C=O groups to-CH_(2)OH groups in water under mild conditions.Furfural reached 98%con-version with 95%selectivity of furfuryl alcohol at 135℃ and under hydrogen pressure close to atmospheric(0.4 MPa)in 2 h.This study allows a low energy-consuming method for producing furfuryl alcohol from hemicellulose-derived furfural,and provides a promising strategy for the conversion of renewable biomassderived compounds into high value-added chemicals.
基金sponsored by the National Natural Science Foundation of China(Grant Nos.22308381 and 22522818)Science Foundation of China University of Petroleum-Beijing(Grant Nos.2462023QNXZ002 and 2462023QNXZ005)+1 种基金Beijing Nova Program(Grant No.20220484096)the National Key R&D Program of China(Grant No.2021YFA1501201).
文摘Hierarchical Ni/ZSM-22-SBA-15 meso-microporous catalysts(Ni/ZS-x)with different acid properties and diffusion characteristics(acid-diffusion)properties were synthesized successfully and applied to the production of high-quality jet fuel by the efficient one-step hydrogenation(hydrodeoxygenation,isomerization,and cracking)of oleic acid.The acid-diffusion properties of the catalysts are modulated by tuning the ZSM-22 seed content,and their effects on the hydrogenation reactions were investigated.Acid properties affect the extent of isomerization and cleavage reactions,whereas diffusion properties affect the accessibility of active centers.The balanced acid-diffusion properties are conducive to efficient hydrogenation reactions of oleic acid.The optimal Ni/ZS-3 exhibits the highest jet fuel yield(56.3%,340°C)and superior iso/n-alkane ratio(i/n=3.12)because of its well-balanced acid-diffusion properties.Besides,the possible hydrogenation mechanism of oleic acid is proposed.
文摘Metal oxides as support for constructing precious metal single-atom catalysts hold great promise for a wide range of industrial applications,but achieving a high-loading of thermally stable metal single atoms on such supports has been challenging.Herein,we report an innovative strategy for the fabrication of high-density single-atoms(Rh,Ru,Pd)catalysts on CaAl-layered double hydroxides(CaAl-LDH)via isomorphous substitution.The Rh species have occupied Ca^(2+)vacancies within CaAl-LDH laminate by ion-exchange,facilitating a substantial loading of isolated Rh single-atoms.Such catalysts displayed superior performance in the selective hydrogenation to quinoline,pivotal for liquid organic hydrogen storage,and the universality for the hydrogenation of N-heterocyclic aromatic hydrocarbons was also verified.Combining the experimental results and density functional theory calculations,the pathway of quinoline hydrogenation over Rh1CaAl-LDH was proposed.This synthetic strategy marks a significant advancement in the field of single-atom catalysts,expanding their horizons in green chemical processes.
基金China Postdoctoral Science Foundation (2023M733451)Dalian Innovation Team in Key Areas(2020RT06)Engineering Research Center for Key Aromatic Compounds and LiaoNing Key Laboratory,Liaoning Provincial Natural Science Foundation (Doctoral Research Start-up Fund 2024-BSBA-37)。
文摘Selective hydrogenation of furfural to furfuryl alcohol is a great challenge in the hydrogenation field due to thermodynamic preference for hydrogenation of C=C over C=O.Herein,a novel Al_(2)O_(3)/C-u hybrid catalyst,composed of N-modified dendritic carbon networks supporting Al_(2)O_(3)nanoparticles,was successfully prepared via carbonizing the freeze-dried gel from spontaneous cross-linking of alginate,Al3+and urea.The obtained carbon-supported Al_(2)O_(3)hybrid catalyst has a high ratio (31%) of Al species in pentahedral-coordinated state.The introduction of urea enhances the surface N content,the ratio of pyrrolic N,and specific surface area of catalyst,leading to improved adsorption capacity of C=O and the accessibility of active sites.In the furfural hydrogenation reaction with isopropyl alcohol as hydrogen donor,Al_(2)O_(3)/C-u catalyst achieved a 90%conversion of furfural with 98.0% selectivity to furfuryl alcohol,outperforming that of commercial γ-Al_(2)O_(3).Moreover,Al_(2)O_(3)/C-u demonstrates excellent catalytic stability in the recycling tests attributed to the synergistic effect of abundant weak Lewis acid sites and the anchoring effect of the carbon network on Al_(2)O_(3)nanoparticles.This work provides an innovative and facile strategy for fabrication of carbon-supported Al_(2)O_(3)hybrid catalysts with rich AlVspecies,serving as a high selective hydrogenation catalyst through MPV reaction route.
基金supported by the National Natural Science Foundation of China(22175136)the State Key Laboratory of Electrical Insulation and Power Equipment(EIPE23127)the Fundamental Research Funds for the Central Universities(xtr052024009).
文摘Metal hydrides with high hydrogen density provide promising hydrogen storage paths for hydrogen transportation.However,the requirement of highly pure H_(2)for re-hydrogenation limits its wide application.Here,amorphous Al_(2)O_(3)shells(10 nm)were deposited on the surface of highly active hydrogen storage material particles(MgH_(2)-ZrTi)by atomic layer deposition to obtain MgH_(2)-ZrTi@Al_(2)O_(3),which have been demonstrated to be air stable with selective adsorption of H_(2)under a hydrogen atmosphere with different impurities(CH_(4),O_(2),N_(2),and CO_(2)).About 4.79 wt%H_(2)was adsorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)at 75℃under 10%CH_(4)+90%H_(2)atmosphere within 3 h with no kinetic or density decay after 5 cycles(~100%capacity retention).Furthermore,about 4 wt%of H_(2)was absorbed by MgH_(2)-ZrTi@10nmAl_(2)O_(3)under 0.1%O_(2)+0.4%N_(2)+99.5%H_(2)and 0.1%CO_(2)+0.4%N_(2)+99.5%H_(2)atmospheres at 100℃within 0.5 h,respectively,demonstrating the selective hydrogen absorption of MgH_(2)-ZrTi@10nmAl_(2)O_(3)in both oxygen-containing and carbon dioxide-containing atmospheres hydrogen atmosphere.The absorption and desorption curves of MgH_(2)-ZrTi@10nmAl_(2)O_(3)with and without absorption in pure hydrogen and then in 21%O_(2)+79%N_(2)for 1 h were found to overlap,further confirming the successful shielding effect of Al_(2)O_(3)shells against O_(2)and N_(2).The MgH_(2)-ZrTi@10nmAl_(2)O_(3)has been demonstrated to be air stable and have excellent selective hydrogen absorption performance under the atmosphere with CH_(4),O_(2),N_(2),and CO_(2).
文摘Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.
基金supported by the National Natural Science Foundation of China(21573031 and 21428301)the Fundamental Research Funds for the Central Universities(DUT15ZD106 and DUT15RC(4)09)~~
文摘A catalyst consisting of platinum nanoparticles on a ZIF-8 support（Pt@ZIF-8） was synthesized in a straightforward one-step procedure,by adding a nanostructured platinum sol during the formation of ZIF-8 at room temperature.Pt@ZIF-8 was highly porous and well crystallized.The Pt nanoparticles were well dispersed within the ZIF-8 support.In the hydrogenation of 1,4-butynediol,Pt@ZIF-8 exhibited high activity,excellent selectivity for 1,4-butenediol of greater than 94%,and reusability.The Pt@ZIF-8 catalyst did not require further additives.The favorable catalytic performance was attributed primarily to the modification of the ZIF-8 support by the platinum nanoparticles.
文摘The IB metal(Au,Ag and Cu)alloyed Pd single atom catalysts had been proved to be efficient in promoting the selectivity for hydrogenation of acetylene to ethylene.As a base metal in the same group as Pd,the Ni-based catalysts are also active for hydrogenation reactions.Herein,the effects of the IB metals on the Ni/SiO2 catalyst for the selective hydrogenation of acetylene were systematically studied.Different from the Pd/SiO2 catalyst,the monometallic Ni/SiO2 catalyst is not active at low temperatures.The addition of the IB metals to the Ni/SiO2 catalysts can greatly enhance the activity.Besides,the catalytic activity of the AuNix/SiO2 and CuNix/SiO2 catalysts increase with the reduction temperature,while the AgNix/SiO2 catalysts are not sensitive to the pretreatment temperature.The origin of the effect of the different IB metals on the Ni-based catalysts for selective hydrogenation of acetylene is discussed based on the characterizations by XRD,TPR and microcalorimetric measurements.
基金supported by the National Natural Science Foundation of China(21633009)Dalian Science Foundation for Distinguished Young Scholars(2017RJ02)the Liaoning Revitalization Talents Program(XLYC1807241)~~
文摘Conversion of alkynes to alkenes by photocatalysis has inspired extensive interest but it is still challenging to obtain both high conversion and selectivity.Here we first demonstrate the photocatalytic conversion of phenylacetylene(PLE)to styrene(STE)with both high conversion and selectivity by using the titania(TiO2)supported platinum(Pt)as photocatalyst under 385 nm monochromatic light irradiation.It is demonstrated that the conversion rate of PLE is strongly dependent on the content of Pt cocatalyst loaded on the surface of TiO2.Based on our optimization,the conversion of PLE and the selectivity towards STE on the 1 wt%Pt/TiO2 photocatalyst can unexpectedly reach as high as 92.4%and 91.3%,respectively.The highly selective photocatalytic hydrogenation can well be extended to the conversion of other typical alkynes to alkenes,demonstrating the generality of selective hydrogenation of C≡C over the Pt/TiO2 photocatalyst.
基金Financial support from the key program supported by the Natural Science Foundation of Zhejiang Province, China (No. LZ18B060002)the National Natural Science Foundation of China (No. 21622308)+2 种基金the Specialized Research Fund for the Doctoral Program of Higher Education (No. J20130060)the Fundamental Research Funds for the Central Universitiesthe Program for Zhejiang Leading Team of S&T Innovation are greatly appreciated
文摘Cyclohexanol is an important intermediate in the synthesis of Nylon-6 and plasticizers. In this work,cobalt oxide nanoparticles（NPs） supported on porous carbon（Co Ox@CN） were fabricated by one-pot method and the hybrids could efficiently and selectively hydrogenate phenol to cyclohexanol with a high yield of 98%. The high catalytic performance of Co Ox@CN was associate with the high surface area（340 m2/g） and uniformly dispersed NPs. Furthurmore, by detailed analysing the relationship between catalytic activity and catalysts composition, it clearly indicated that the Co3O4 in Co Ox@CN played an important role for the adsorption and activation of phenol and the in situ gernerated Co was responsible for hydrogen adsorption and dissociation. These findings provide a fundamental insight into the real active sites in hydrogenation of phenol using Co-based catalysts.
基金supported by the National Natural Science Foundation of China (21622308)Key Program Supported by the Natural Science Foundation of Zhejiang Province, China (LZ18B060002)the Fundamental Research Funds for the Central Universities (2017XZZX002-16)~~
文摘The selective hydrogenation of phenol to cyclohexanone is an important process in the chemical industry.However,achieving high selectivity at high conversion rates is highly challenging,particularly under continuous reaction conditions.Here,we found that the presence of Na alkaline additives(NaX,X=CO3^2–,HCO^3–,or OH^–)on Pd/Al2O3 not only promoted the phenol conversion from 8.3%to>99%but also increased the cyclohexanone selectivity from 89%to>97%during the continuous hydrogenation of phenol on a fixed bed reactor.After 1200 h of continuous reaction,no activity or selectivity attenuation was observed and the turnover number was approximately 2.9×10^5.Density functional theory calculations,spectroscopic,and dynamics studies demonstrated that the addition of NaX greatly promoted phenol adsorption and hydrogen activation,thereby improving catalytic activity.Simultaneously,the formation of a“-C=O-Na-”intermediate inhibited the excessive hydrogenation and intermolecular coupling of cyclohexanone,leading to high selectivity.
文摘The effect of La on the performance of a supported RuB amorphous alloy catalyst for benzene selective hydrogenation was studied by means of activity and selectivity tests, such as HRTEM, SAED, XPS, and XRD. The results show that the addition of La to RuB amorphous alloy catalyst can evidently increase the activity and improve the thermal stability of RuB amorphous alloy to refrain its crystallization. The promoting effect of La on the activity of RuB amorphous alloy catalyst is because of the high dispersion of the active components.
文摘An efficient heterogeneous catalyst,Pd@MIL‐101(Cr)‐NH2,is prepared through a direct pathway of anionic exchange followed by hydrogen reduction with amino‐containing MIL‐101as the host matrix.The composite is thermally stable up to350°C and the Pd nanoparticles uniformly disperse on the matal organic framework(MOF)support,which are attributed to the presence of the amino groups in the frameworks of MIL‐101(Cr)‐NH2.The selective hydrogenation of biomass‐based furfural to tetrahydrofurfuryl alcohol is investigated by using this multifunctional catalyst Pd@MIL‐101(Cr)‐NH2in water media.A complete hydrogenation of furfural is achieved at a low temperature of40°C with the selectivity of tetrahydrofurfuryl alcohol close to100%.The amine‐functionalized MOF improves the hydrogen bonding interactions between the intermediate furfuryl alcohol and the support,which is conducive for the further hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol in good coordination with the metal sites.
