Four different topics for high-temperature components, namely the development of the assessment codes for the structural integrity of high-temperature components, the application of continuous damage mechanics and pro...Four different topics for high-temperature components, namely the development of the assessment codes for the structural integrity of high-temperature components, the application of continuous damage mechanics and probabilistic damage mode on the life assessment of high-temperature components, the life extension for high-temperature components and a proposed strategy for remanufacturing of high-temperature components were discussed in this paper. These topics should provide some important insights for the design and re-design of high- temperature components.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
The efficient extraction and separation of valuable metal elements from coal gasification fine slag(CGFS)are crucial for the comprehensive high-value utilization of its constituents.This study focused on the carbon-ri...The efficient extraction and separation of valuable metal elements from coal gasification fine slag(CGFS)are crucial for the comprehensive high-value utilization of its constituents.This study focused on the carbon-rich components of CGFS(CGFS-H)and systematically investigates the selective leaching behavior of Fe^(3+),Al^(3+)and Ca^(2+)using three organic acid extractants,i.e.,citric acid,tartaric acid,and tetrasodium iminodisuccinate.Additionally,the stepwise leaching of iron,aluminum and calcium from CGFS-H is explored.The selective dissolution mechanisms of these metals by different organic acids are elucidated through X-ray diffraction(XRD),X-ray fluorescence(XRF),and scanning electron microscopy(SEM)analyses.The results indicate that tetrasodium iminodisuccinate exhibits the highest leaching selectivity for Fe^(3+),while tartaric acid demonstrateds a comparable affinity for both Fe^(3+)and Al^(3+).In contrast citric acid shows superior selectivity toward Ca^(2+).The leaching yield of Fe^(3+),Al^(3+)and Ca^(2+)after sequential leaching with the three organic acids were 79.8%,65.08%and 78.6%,respectively.These findings confirm that effective and selective separation of Fe^(3+),Al^(3+)and Ca^(2+)from CGFS-H can be achieved via optimized organic acid-based leaching strategies.This advancement provides a critical foundation for developing Ca/Fe/Al hydrotalcite materials using CGFS-H as a sustainable feedstock,thereby facilitating the transformation of waste residue into high-value functional materials and promoting resourceefficient utilization of coal gasification fine slag.展开更多
Diesel accounts for over 60%of the products derived from direct coal liquefaction(DCL).Compared to petroleum-based diesel,DCL diesel exhibits a cetane number ranging from 30 to 40,which fails to meet the automotive di...Diesel accounts for over 60%of the products derived from direct coal liquefaction(DCL).Compared to petroleum-based diesel,DCL diesel exhibits a cetane number ranging from 30 to 40,which fails to meet the automotive diesel standard requirement of≥45.Therefore,rapid and accurate analysis of its chemical composition is crucial for property optimization to meet fuel specifications by component blending.Thought traditional methods like gas chromatography offer high accuracy,they are unsuitable for rapid online analysis under industrial conditions.Near-infrared(NIR)spectroscopy can provide advantages in rapid,non-destructive analysis.Its application however,is limited by the complexity of spectral data interpretation.Machine learning(ML)is effective method for extracting valuable information from spectra and establishing high-precision prediction models.This study integrates NIR spectroscopy with ML to construct a spectral-composition database for DCL diesel.Feature extraction was performed using the correlation coefficient and mutual information methods to screen key wavelength variables and reduce data dimensionality.Subsequently,the predictive performance of three ML models—Lasso,SVR and XGBoost—was compared.Results indicate that excluding spectral data with absorbance greater than 1 significantly enhances model accuracy,increasing the test set R^(2) from 0.85 to 0.96.After feature extraction,the optimal number of wavelength variables was reduced to 177,substantially improving computational efficiency.Among the models evaluated,the SVR-MI-0.9 model,based on mutual information feature selection,demonstrated the best performance,achieving training and test set R^(2) values both exceeding 0.98.This model enables precise prediction of paraffin,naphthene,and aromatic hydrocarbon contents.This research provides a robust methodology for intelligent online quality monitoring.An intelligent NIR spectroscopy data analysis software was independently developed based on the established model.Compared with comprehensive two-dimensional gas chromatography,the software reduced the analysis time by over 98%,with an absolute prediction error below 0.2%.Thus,rapid analysis of DCL diesel components was successfully realized.展开更多
A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)t...A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.展开更多
[Objectives]This study was conducted to isolate and identify the components from stems of Polyalthia plagioneura.[Methods]The compounds were isolated and purified by silica gel column,Sephadex LH-20,and C_(18) chromat...[Objectives]This study was conducted to isolate and identify the components from stems of Polyalthia plagioneura.[Methods]The compounds were isolated and purified by silica gel column,Sephadex LH-20,and C_(18) chromatography.Their chemical structures were elucidated on the basis of physicochemical properties and spectral data.[Results]Five compounds were isolated and identified as:di(2-ethylhexyl)phthalate(1),cinnamic anhydride(2),phthalic acid(3),citric acid(4),and syringaldehyde(5).[Conclusions]All compounds were isolated from this plant for the first time.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and propertie...The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.展开更多
In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved cerami...In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.展开更多
Enhancing the resilience of critical infrastructure(CI)systems has become a focal point of national and inter-national policies.However,the formulation of resilience enhancement strategies often requires component-(i....Enhancing the resilience of critical infrastructure(CI)systems has become a focal point of national and inter-national policies.However,the formulation of resilience enhancement strategies often requires component-(i.e.asset-)level prioritization,which entails many complexities.Acknowledging the complex and interdependent nature of infrastructure systems,this paper aims to aid researchers,practitioners and policy-makers by pre-senting a review of the relative literature and current state-of-the-art,and by identifying future research op-portunities to improve the applicability and operationalizability of CI component identification and prioritization methods.Theoretical and practical applications are reviewed for definitions,analysis and modelling approaches regarding the resilience of interdependent infrastructure systems.A detailed review of infrastructure criticality definitions,component criticality assessment and prioritization frameworks,from scientific,policy and other documents,is presented.A discussion on social justice and equity dimensions therein is included,which have the potential to greatly influence decisions and should always be incorporated in infrastructure planning and in-vestment discussions.The findings of this review are discussed in terms of applicability and operationalizability.Key recommendations for future research include:(i)developing quantification frameworks for CI component criticality based on formal definitions and multiple criteria,(ii)incorporating the entire resilience cycle of CI in component prioritization,(iii)accounting for the socio-technical nature of CI systems by integrating social di-mensions and their wider operating environment and(iv)developing comprehensive model validation,cali-bration and uncertainty analysis frameworks.展开更多
To investigate the evolution of grain orientation and slip modes in magnesium alloys with multiple texture components,an AZ31 gradient-structured magnesium alloy sheet was fabricated using hard plate rolling(HPR).The ...To investigate the evolution of grain orientation and slip modes in magnesium alloys with multiple texture components,an AZ31 gradient-structured magnesium alloy sheet was fabricated using hard plate rolling(HPR).The changes in texture and slip modes under different reductions were examined.The results demonstrate that the AZ31 magnesium alloy sheets display a self-epitaxial gradient structure,with the best mechanical properties observed at rolling temperature of 673 K and reduction of 50%.Significant changes in texture type and strength are observed along the normal direction(ND)of the sheet.The coarse-grain region exhibits a bimodal texture aligned with the rolling direction.These texture variations enhance the stress distribution at the fine grain-coarse grain interface,influencing the grain orientation and the activation of different slip modes,thus improving the mechanical properties of gradient-structured magnesium alloy sheets.This approach offers a new strategy for the fabrication of high-performance magnesium alloy sheets.展开更多
This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standar...This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standard system was established for comprehensive quality evaluation of HTD.There were obvious changes in the physicochemical properties,enzyme activities,and volatile flavor components at different storage periods,which affected the sensory evaluation of HTD to a certain extent.The results of high-throughput sequencing revealed significant microbial diversity,and showed that the bacterial community changed significantly more than did the fungal community.During the storage process,the dominant bacterial genera were Kroppenstedtia and Thermoascus.The correlation between dominant microorganisms and quality indicators highlighted their role in HTD quality.Lactococcus,Candida,Pichia,Paecilomyces,and protease activity played a crucial role in the formation of isovaleraldehyde.Acidic protease activity had the greatest impact on the microbial community.Moisture promoted isobutyric acid generation.Furthermore,the comprehensive quality evaluation standard system was established by the entropy weight method combined with multi-factor fuzzy mathematics.Consequently,this study provides innovative insights for comprehensive quality evaluation of HTD during storage and establishes a groundwork for scientific and rational storage of HTD and quality control of sauce-flavor Baijiu.展开更多
Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,a...Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.展开更多
High-nickel ternary cathodes hold a great application prospect in solid-state lithium metal batteries to achieve high-energy density,but they still suffer from structural instability and detrimental side reactions wit...High-nickel ternary cathodes hold a great application prospect in solid-state lithium metal batteries to achieve high-energy density,but they still suffer from structural instability and detrimental side reactions with the solid-state electrolytes.To circumvent these issues,a continuous uniform layer polyacrylonitrile(PAN)was introduced on the surface of LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2) via in situ polymerization of acrylonitrile(AN).Furthermore,the partial-cyclized treatment of PAN(cPAN)coating layer presents high ionic and electron conductivity,which can accelerate interfacial Li+and electron diffusion simultaneously.And the thermodynamically stabilized cPAN coating layer cannot only effectively inhibit detrimental side reactions between cathode and solid-state electrolytes but also provide a homogeneous stress to simultaneously address the problems of bulk structural degradation,which contributes to the exceptional mechanical and electrochemical stabilities of the modified electrode.Besides,the coordination bond interaction between the cPAN and NCM811 can suppress the migration of Ni to elevate the stability of the crystal structure.Benefited from these,the In-cPAN-260@NCM811 shows excellent cycling performance with a retention of 86.8%after 300 cycles and superior rate capability.And endow the solid-state battery with thermal safety stability even at hightemperature extreme environment.This facile and scalable surface engineering represents significant progress in developing high-performance solid-state lithium metal batteries.展开更多
High-temperature industries,as the primary consumers of energy,are greatly concerned with energy savings.Designing refractory linings with low thermal conductivity to reduce heat dissipation through high-temperature f...High-temperature industries,as the primary consumers of energy,are greatly concerned with energy savings.Designing refractory linings with low thermal conductivity to reduce heat dissipation through high-temperature furnace linings is a critical concern.In this study,a series of novel entropy-stabilized spinel materials are reported,and their potential applications in high-temperature industries are investigated.XRD and TEM results indicate that all materials possess a cubic spinel crystal structure with the■space group.Furthermore,these materials exhibit good phase stability at high temperatures.All entropy-stabilized spinel aggregates demonstrated high refractoriness(>1800℃)and a high load softening temperature(>1700℃).The impact of configurational entropy on the properties of entropy-stabilized spinel materials was also studied.As configurational entropy increased,the thermal conductivity of the entropy-stabilized spinel decreased,while slag corrosion resistance deteriorated.For the entropy-stabilized spinel with a configurational entropy value of 1.126R,it showed good high-temperature stability,reliable resistance to slag attack,and a low thermal conductivity of 2.776 W·m^(-1)·K^(-1)at 1000℃.展开更多
The austenite(γ)reversely transformed from lath martensite(LM),lath bainite(LB),granular bainite(GB)and pearlite+ferrite(P+F)in a high-strength steel was studied at high temperatures using in-situ electron backscatte...The austenite(γ)reversely transformed from lath martensite(LM),lath bainite(LB),granular bainite(GB)and pearlite+ferrite(P+F)in a high-strength steel was studied at high temperatures using in-situ electron backscatter diffraction(EBSD).The memory effect of initial γ significantly affects the nucleation of the reverted γ in LM and GB structures,while a weak influence on that of LB and P+F structures.This results in a significant difference in γ grain size after complete austenitization,with the first two obtaining larger γ grains while the latter two are relatively small.Crystallographic analysis revealed that the reverted γ with acicular morphology(γA),most of which maintained the same orientation with the prior γ,dominated the reaustenitization behavior of LM and GB structures through preferential nucleation within γ grains and coalesced growth modes.Although globular reverted γ(γ_(G))with random orientation or large deviation from the prior γ can nucleate at the grain boundaries or within the grains,it is difficult for it to grow and play a role in segmenting and refining the prior γ due to the inhibition of γ_(A) coalescing.For LB and P+F structures,the nucleation rate of intragranular γ_(G) increases with increasing temperature,and always shows a random orientation.These γ_(G) grains can coarsen simultaneously with the intergranular γ_(G),ultimately playing a role in jointly dividing and refining the finalγgrains.Research also found that the differences in the effects of four different microstructures on revertedγnucleation are closely related to the variant selection of the matrix structure,as well as the content and size of cementite(θ).High density of block boundaries induced by weakening of variant selection and many fineθformed in the lath are the key to promoting LB structure to obtain more intragranular γ_(G) formation,as well as the important role of the large-sized θ in P+F structure.展开更多
Acupuncture,a therapeutic practice rooted in traditional Chinese medicine and integrated with modern neuroscience,achieves its effects by stimulating sensory nerves at specific anatomical points known as acupoints.Thi...Acupuncture,a therapeutic practice rooted in traditional Chinese medicine and integrated with modern neuroscience,achieves its effects by stimulating sensory nerves at specific anatomical points known as acupoints.This review systematically explores the therapeutic components of acupuncture,emphasizing the interplay between sensory nerve characteristics and neural signaling pathways.Key factors such as acupoint location,needling depth,stimulation intensity,retention time,and the induction of sensations(e.g.,Deqi)are analyzed for their roles in neural activation and clinical outcomes.The review highlights how variations in spinal segment targeting,tissue-specific receptor activation,and stimulation modalities(e.g.,manual acupuncture,electroacupuncture,moxibustion)influence therapeutic effects.Emerging evidence underscores the significance of ion channels,dermatomes,myotomes,and genespecific pathways in mediating systemic effects.Additionally,the differential roles of mechanical,thermal and nociceptive stimuli and the temporal dynamics of sensory and immune responses are addressed.While insights from animal models have advanced our understanding,their translation to clinical practice requires further investigation.This comprehensive review identifies critical parameters for optimizing acupuncture therapy,advocating for individualized treatment strategies informed by neuroanatomical and neurophysiological principles,ultimately enhancing its precision and efficacy in modern medicine.展开更多
The high-temperature mechanical behaviors of Multi-Layer Composite Panels(MCP)and Corrugated Sandwich Panels(CSP)of Continuous Glass Fiber-Reinforced Polypropylene(CGFRPP)are critical for their application in aerospac...The high-temperature mechanical behaviors of Multi-Layer Composite Panels(MCP)and Corrugated Sandwich Panels(CSP)of Continuous Glass Fiber-Reinforced Polypropylene(CGFRPP)are critical for their application in aerospace fields,which have been rarely mentioned in previous studies.High-temperature quasi-static tensile and compression tests on CGFRPP MCP are conducted first.The results showed that the tensile and compression strength,stiffness,and tensile modulus of MCP decreased with increasing temperature.The Gibson model was found to be more suitable for predicting the high-temperature mechanical performance of MCP after comparing the calculated results of different theoretical models with experimental data.Secondly,hightemperature planar compression tests were conducted on the CGFRPP CSP,revealing that the main failure modes were corrugated core buckling and delamination between the face panel and core material,with delamination being intensified at higher temperatures.Therefore,we proposed a strength theoretical model that considers structural buckling failure and interface delamination failure,and introduced the influence factor to evaluate the effect of interface delamination on structural strength.展开更多
Commercial wrought high-strength Cu-Cr-Zr alloys face limited high-temperature properties due to the rapid coarsening or dissolution of Cr precipitates.Here,we report a laser powder bed fusion(LPBF)fabricated Cu-0.84C...Commercial wrought high-strength Cu-Cr-Zr alloys face limited high-temperature properties due to the rapid coarsening or dissolution of Cr precipitates.Here,we report a laser powder bed fusion(LPBF)fabricated Cu-0.84Cr-0.42Zr(wt.%)alloy with exceptional heat resistance after aging.Primary Cr@Cu_(5)Zr phase(∼39.8 nm)with core-shell structure and a high density of heat-stable dislocations were intro-duced from the rapid solidification of LPBF and enabled the alloy to gain significant improvement in high-temperature properties.After aging treatment,secondary Cr and Cu_(51)Zr_(14)phases(∼3.4 nm)were precipitated,in which Zr solute was segregated at one side of the Cr phase,enhancing the thermal sta-bility of Cr phase.The excellent combinations of strength and thermal conductivity were achieved at or above 400℃.Particularly at 600℃,the aged sample not only exhibited a high tensile strength of∼196 MPa,which significantly surpassed that of wrought Cu-Cr-Zr alloys,but also possessed a thermal conductivity of∼349 W/(m K)comparable to that of pure copper.展开更多
文摘Four different topics for high-temperature components, namely the development of the assessment codes for the structural integrity of high-temperature components, the application of continuous damage mechanics and probabilistic damage mode on the life assessment of high-temperature components, the life extension for high-temperature components and a proposed strategy for remanufacturing of high-temperature components were discussed in this paper. These topics should provide some important insights for the design and re-design of high- temperature components.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金Supported by National Natural Science Foundation(52374279)。
文摘The efficient extraction and separation of valuable metal elements from coal gasification fine slag(CGFS)are crucial for the comprehensive high-value utilization of its constituents.This study focused on the carbon-rich components of CGFS(CGFS-H)and systematically investigates the selective leaching behavior of Fe^(3+),Al^(3+)and Ca^(2+)using three organic acid extractants,i.e.,citric acid,tartaric acid,and tetrasodium iminodisuccinate.Additionally,the stepwise leaching of iron,aluminum and calcium from CGFS-H is explored.The selective dissolution mechanisms of these metals by different organic acids are elucidated through X-ray diffraction(XRD),X-ray fluorescence(XRF),and scanning electron microscopy(SEM)analyses.The results indicate that tetrasodium iminodisuccinate exhibits the highest leaching selectivity for Fe^(3+),while tartaric acid demonstrateds a comparable affinity for both Fe^(3+)and Al^(3+).In contrast citric acid shows superior selectivity toward Ca^(2+).The leaching yield of Fe^(3+),Al^(3+)and Ca^(2+)after sequential leaching with the three organic acids were 79.8%,65.08%and 78.6%,respectively.These findings confirm that effective and selective separation of Fe^(3+),Al^(3+)and Ca^(2+)from CGFS-H can be achieved via optimized organic acid-based leaching strategies.This advancement provides a critical foundation for developing Ca/Fe/Al hydrotalcite materials using CGFS-H as a sustainable feedstock,thereby facilitating the transformation of waste residue into high-value functional materials and promoting resourceefficient utilization of coal gasification fine slag.
基金Supported by National Natural Science Foundation of China(U24B6018,22178243)。
文摘Diesel accounts for over 60%of the products derived from direct coal liquefaction(DCL).Compared to petroleum-based diesel,DCL diesel exhibits a cetane number ranging from 30 to 40,which fails to meet the automotive diesel standard requirement of≥45.Therefore,rapid and accurate analysis of its chemical composition is crucial for property optimization to meet fuel specifications by component blending.Thought traditional methods like gas chromatography offer high accuracy,they are unsuitable for rapid online analysis under industrial conditions.Near-infrared(NIR)spectroscopy can provide advantages in rapid,non-destructive analysis.Its application however,is limited by the complexity of spectral data interpretation.Machine learning(ML)is effective method for extracting valuable information from spectra and establishing high-precision prediction models.This study integrates NIR spectroscopy with ML to construct a spectral-composition database for DCL diesel.Feature extraction was performed using the correlation coefficient and mutual information methods to screen key wavelength variables and reduce data dimensionality.Subsequently,the predictive performance of three ML models—Lasso,SVR and XGBoost—was compared.Results indicate that excluding spectral data with absorbance greater than 1 significantly enhances model accuracy,increasing the test set R^(2) from 0.85 to 0.96.After feature extraction,the optimal number of wavelength variables was reduced to 177,substantially improving computational efficiency.Among the models evaluated,the SVR-MI-0.9 model,based on mutual information feature selection,demonstrated the best performance,achieving training and test set R^(2) values both exceeding 0.98.This model enables precise prediction of paraffin,naphthene,and aromatic hydrocarbon contents.This research provides a robust methodology for intelligent online quality monitoring.An intelligent NIR spectroscopy data analysis software was independently developed based on the established model.Compared with comprehensive two-dimensional gas chromatography,the software reduced the analysis time by over 98%,with an absolute prediction error below 0.2%.Thus,rapid analysis of DCL diesel components was successfully realized.
基金provided by the National Natural Science Foundation of China(NSFC)through the Joint Fund Project(No.U24A202815)the Youth Science Fund Project(No.52302031).
文摘A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.
基金Supported by Jiangxi Education Department Project(GJJ201533)University-level Project of Gannan Medical University(YB201902).
文摘[Objectives]This study was conducted to isolate and identify the components from stems of Polyalthia plagioneura.[Methods]The compounds were isolated and purified by silica gel column,Sephadex LH-20,and C_(18) chromatography.Their chemical structures were elucidated on the basis of physicochemical properties and spectral data.[Results]Five compounds were isolated and identified as:di(2-ethylhexyl)phthalate(1),cinnamic anhydride(2),phthalic acid(3),citric acid(4),and syringaldehyde(5).[Conclusions]All compounds were isolated from this plant for the first time.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金financially supported by the National Key Research and Development Program of China(Nos.2022YFB3709300,2021YFB3701000)the National Natural Science Foundation of China(Nos.52271090,52071036,U2037601,U21A2048)+1 种基金Chongqing Science and Technology Commission,China(Nos.CSTB2022TIAD-KPX0021,CSTC2024YCJHBGZXM0164,CSTB2024TIAD-KPX0001)the Fundamental Research Funds for the Central Universities,China(No.2022CDJDX-002)。
文摘The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.
基金National Natural Science Foundation of China(No.U2241205)the Natural Science Basic Research Program of Shaanxi(Nos.2022JC-33,2023-GHZD-35,and 2024JC-ZDXM-25)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National 111 Project to provide fund for conducting experiments。
文摘In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.
基金supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement No.101037424.
文摘Enhancing the resilience of critical infrastructure(CI)systems has become a focal point of national and inter-national policies.However,the formulation of resilience enhancement strategies often requires component-(i.e.asset-)level prioritization,which entails many complexities.Acknowledging the complex and interdependent nature of infrastructure systems,this paper aims to aid researchers,practitioners and policy-makers by pre-senting a review of the relative literature and current state-of-the-art,and by identifying future research op-portunities to improve the applicability and operationalizability of CI component identification and prioritization methods.Theoretical and practical applications are reviewed for definitions,analysis and modelling approaches regarding the resilience of interdependent infrastructure systems.A detailed review of infrastructure criticality definitions,component criticality assessment and prioritization frameworks,from scientific,policy and other documents,is presented.A discussion on social justice and equity dimensions therein is included,which have the potential to greatly influence decisions and should always be incorporated in infrastructure planning and in-vestment discussions.The findings of this review are discussed in terms of applicability and operationalizability.Key recommendations for future research include:(i)developing quantification frameworks for CI component criticality based on formal definitions and multiple criteria,(ii)incorporating the entire resilience cycle of CI in component prioritization,(iii)accounting for the socio-technical nature of CI systems by integrating social di-mensions and their wider operating environment and(iv)developing comprehensive model validation,cali-bration and uncertainty analysis frameworks.
基金supported by the Natural Science Foundation of Heilongjiang Province,China(No.JQ2022E004)。
文摘To investigate the evolution of grain orientation and slip modes in magnesium alloys with multiple texture components,an AZ31 gradient-structured magnesium alloy sheet was fabricated using hard plate rolling(HPR).The changes in texture and slip modes under different reductions were examined.The results demonstrate that the AZ31 magnesium alloy sheets display a self-epitaxial gradient structure,with the best mechanical properties observed at rolling temperature of 673 K and reduction of 50%.Significant changes in texture type and strength are observed along the normal direction(ND)of the sheet.The coarse-grain region exhibits a bimodal texture aligned with the rolling direction.These texture variations enhance the stress distribution at the fine grain-coarse grain interface,influencing the grain orientation and the activation of different slip modes,thus improving the mechanical properties of gradient-structured magnesium alloy sheets.This approach offers a new strategy for the fabrication of high-performance magnesium alloy sheets.
文摘This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standard system was established for comprehensive quality evaluation of HTD.There were obvious changes in the physicochemical properties,enzyme activities,and volatile flavor components at different storage periods,which affected the sensory evaluation of HTD to a certain extent.The results of high-throughput sequencing revealed significant microbial diversity,and showed that the bacterial community changed significantly more than did the fungal community.During the storage process,the dominant bacterial genera were Kroppenstedtia and Thermoascus.The correlation between dominant microorganisms and quality indicators highlighted their role in HTD quality.Lactococcus,Candida,Pichia,Paecilomyces,and protease activity played a crucial role in the formation of isovaleraldehyde.Acidic protease activity had the greatest impact on the microbial community.Moisture promoted isobutyric acid generation.Furthermore,the comprehensive quality evaluation standard system was established by the entropy weight method combined with multi-factor fuzzy mathematics.Consequently,this study provides innovative insights for comprehensive quality evaluation of HTD during storage and establishes a groundwork for scientific and rational storage of HTD and quality control of sauce-flavor Baijiu.
基金National Natural Science Foundation of China(52071126)Natural Science Foundation of Tianjin City,China(22JCQNJC01240)+2 种基金Central Guidance on Local Science and Technology Development Fund of Hebei Province(226Z1009G)Special Funds for Science and Technology Innovation in Hebei(2022X19)Anhui Provincial Natural Science Foundation(2308085ME135)。
文摘Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.
基金financially supported by the National Natural Science Foundation of China(Nos.22102212 and 22479067).
文摘High-nickel ternary cathodes hold a great application prospect in solid-state lithium metal batteries to achieve high-energy density,but they still suffer from structural instability and detrimental side reactions with the solid-state electrolytes.To circumvent these issues,a continuous uniform layer polyacrylonitrile(PAN)was introduced on the surface of LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2) via in situ polymerization of acrylonitrile(AN).Furthermore,the partial-cyclized treatment of PAN(cPAN)coating layer presents high ionic and electron conductivity,which can accelerate interfacial Li+and electron diffusion simultaneously.And the thermodynamically stabilized cPAN coating layer cannot only effectively inhibit detrimental side reactions between cathode and solid-state electrolytes but also provide a homogeneous stress to simultaneously address the problems of bulk structural degradation,which contributes to the exceptional mechanical and electrochemical stabilities of the modified electrode.Besides,the coordination bond interaction between the cPAN and NCM811 can suppress the migration of Ni to elevate the stability of the crystal structure.Benefited from these,the In-cPAN-260@NCM811 shows excellent cycling performance with a retention of 86.8%after 300 cycles and superior rate capability.And endow the solid-state battery with thermal safety stability even at hightemperature extreme environment.This facile and scalable surface engineering represents significant progress in developing high-performance solid-state lithium metal batteries.
基金financially supported by the National Natural Science Foundation of China(Nos.52472032 and 52172023)the Key Program of Natural Science Foundation of Hubei Province(No.2024AFA083)
文摘High-temperature industries,as the primary consumers of energy,are greatly concerned with energy savings.Designing refractory linings with low thermal conductivity to reduce heat dissipation through high-temperature furnace linings is a critical concern.In this study,a series of novel entropy-stabilized spinel materials are reported,and their potential applications in high-temperature industries are investigated.XRD and TEM results indicate that all materials possess a cubic spinel crystal structure with the■space group.Furthermore,these materials exhibit good phase stability at high temperatures.All entropy-stabilized spinel aggregates demonstrated high refractoriness(>1800℃)and a high load softening temperature(>1700℃).The impact of configurational entropy on the properties of entropy-stabilized spinel materials was also studied.As configurational entropy increased,the thermal conductivity of the entropy-stabilized spinel decreased,while slag corrosion resistance deteriorated.For the entropy-stabilized spinel with a configurational entropy value of 1.126R,it showed good high-temperature stability,reliable resistance to slag attack,and a low thermal conductivity of 2.776 W·m^(-1)·K^(-1)at 1000℃.
基金financially supported by the National Natural Science Foundation of China(Nos.52271089 and 52001023)the Basic Research and Application Basic Research Foundation of Guangdong Province(Nos.2022A1515240016 and 2023B1515250006)the Fundamental Research Funds for the Central Universities(No.FRF-BD-23-01).
文摘The austenite(γ)reversely transformed from lath martensite(LM),lath bainite(LB),granular bainite(GB)and pearlite+ferrite(P+F)in a high-strength steel was studied at high temperatures using in-situ electron backscatter diffraction(EBSD).The memory effect of initial γ significantly affects the nucleation of the reverted γ in LM and GB structures,while a weak influence on that of LB and P+F structures.This results in a significant difference in γ grain size after complete austenitization,with the first two obtaining larger γ grains while the latter two are relatively small.Crystallographic analysis revealed that the reverted γ with acicular morphology(γA),most of which maintained the same orientation with the prior γ,dominated the reaustenitization behavior of LM and GB structures through preferential nucleation within γ grains and coalesced growth modes.Although globular reverted γ(γ_(G))with random orientation or large deviation from the prior γ can nucleate at the grain boundaries or within the grains,it is difficult for it to grow and play a role in segmenting and refining the prior γ due to the inhibition of γ_(A) coalescing.For LB and P+F structures,the nucleation rate of intragranular γ_(G) increases with increasing temperature,and always shows a random orientation.These γ_(G) grains can coarsen simultaneously with the intergranular γ_(G),ultimately playing a role in jointly dividing and refining the finalγgrains.Research also found that the differences in the effects of four different microstructures on revertedγnucleation are closely related to the variant selection of the matrix structure,as well as the content and size of cementite(θ).High density of block boundaries induced by weakening of variant selection and many fineθformed in the lath are the key to promoting LB structure to obtain more intragranular γ_(G) formation,as well as the important role of the large-sized θ in P+F structure.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.NRF-2020R1C1C1004107)。
文摘Acupuncture,a therapeutic practice rooted in traditional Chinese medicine and integrated with modern neuroscience,achieves its effects by stimulating sensory nerves at specific anatomical points known as acupoints.This review systematically explores the therapeutic components of acupuncture,emphasizing the interplay between sensory nerve characteristics and neural signaling pathways.Key factors such as acupoint location,needling depth,stimulation intensity,retention time,and the induction of sensations(e.g.,Deqi)are analyzed for their roles in neural activation and clinical outcomes.The review highlights how variations in spinal segment targeting,tissue-specific receptor activation,and stimulation modalities(e.g.,manual acupuncture,electroacupuncture,moxibustion)influence therapeutic effects.Emerging evidence underscores the significance of ion channels,dermatomes,myotomes,and genespecific pathways in mediating systemic effects.Additionally,the differential roles of mechanical,thermal and nociceptive stimuli and the temporal dynamics of sensory and immune responses are addressed.While insights from animal models have advanced our understanding,their translation to clinical practice requires further investigation.This comprehensive review identifies critical parameters for optimizing acupuncture therapy,advocating for individualized treatment strategies informed by neuroanatomical and neurophysiological principles,ultimately enhancing its precision and efficacy in modern medicine.
基金co-supported by the National Natural Science Foundation of China(Nos.12372127,12202085,12302464)the Fundamental Research Funds for the Central Universities,China(No.2024CDJXY009)+1 种基金the Chongqing Outstanding Youth Fund,China(No.CSTB2024NSCQ-JQX0028)the Chongqing Natural Science Foundation,China(Nos.cstc2021ycjh-bgzxm0117,CSTB2022NSCQ-MSX0608)。
文摘The high-temperature mechanical behaviors of Multi-Layer Composite Panels(MCP)and Corrugated Sandwich Panels(CSP)of Continuous Glass Fiber-Reinforced Polypropylene(CGFRPP)are critical for their application in aerospace fields,which have been rarely mentioned in previous studies.High-temperature quasi-static tensile and compression tests on CGFRPP MCP are conducted first.The results showed that the tensile and compression strength,stiffness,and tensile modulus of MCP decreased with increasing temperature.The Gibson model was found to be more suitable for predicting the high-temperature mechanical performance of MCP after comparing the calculated results of different theoretical models with experimental data.Secondly,hightemperature planar compression tests were conducted on the CGFRPP CSP,revealing that the main failure modes were corrugated core buckling and delamination between the face panel and core material,with delamination being intensified at higher temperatures.Therefore,we proposed a strength theoretical model that considers structural buckling failure and interface delamination failure,and introduced the influence factor to evaluate the effect of interface delamination on structural strength.
基金supported by the National Natural Science Foun-dation of China(Nos.52127802 and 52431008).
文摘Commercial wrought high-strength Cu-Cr-Zr alloys face limited high-temperature properties due to the rapid coarsening or dissolution of Cr precipitates.Here,we report a laser powder bed fusion(LPBF)fabricated Cu-0.84Cr-0.42Zr(wt.%)alloy with exceptional heat resistance after aging.Primary Cr@Cu_(5)Zr phase(∼39.8 nm)with core-shell structure and a high density of heat-stable dislocations were intro-duced from the rapid solidification of LPBF and enabled the alloy to gain significant improvement in high-temperature properties.After aging treatment,secondary Cr and Cu_(51)Zr_(14)phases(∼3.4 nm)were precipitated,in which Zr solute was segregated at one side of the Cr phase,enhancing the thermal sta-bility of Cr phase.The excellent combinations of strength and thermal conductivity were achieved at or above 400℃.Particularly at 600℃,the aged sample not only exhibited a high tensile strength of∼196 MPa,which significantly surpassed that of wrought Cu-Cr-Zr alloys,but also possessed a thermal conductivity of∼349 W/(m K)comparable to that of pure copper.
