This paper presents a novel precision delay circuit design for high-speed data acquisition systems. Many studies have suggested that various advanced electronic measurement apparatuses require that the delay circuit s...This paper presents a novel precision delay circuit design for high-speed data acquisition systems. Many studies have suggested that various advanced electronic measurement apparatuses require that the delay circuit should have a high precision and a short delay interval. Practically, however, such measurement apparatuses are low in preci- sion and long in delay interval at present. The structure and function of a data acquisition system is introduced first; then the principle of ramp-based precision delay circuits and the digitally programmable delay generator is studied and the precision delay circuit is designed. The authors also demonstrated 8-bit programmable delay circuits with a timing pre- cision of 10 ps. Therefore the programmable precision delay circuit here presented has a higher precision, shorter inter- val and more detectable function than any other precision delay circuit.展开更多
Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predomina...Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predominantly on the phase-shifting approach,which involves collecting multiple interferograms and imposes stringent demands on environmental stability.These issues significantly hinder its ability to achieve real-time and dynamic high-precision measurements.Therefore,this study proposes a high-precision large-aperture single-frame interferometric surface profile measurement(LA-SFISPM)method based on deep learning and explores its capability to realize dynamic measurements with high accuracy.The interferogram is matched to the phase by training the data measured using the small aperture.The consistency of the surface features of the small and large apertures is enhanced via contrast learning and feature-distribution alignment.Hence,high-precision phase reconstruction of large-aperture optical components can be achieved without using a phase shifter.The experimental results show that for the tested mirror withΦ=820 mm,the surface profile obtained from LA-SFISPM is subtracted point-by-point from the ground truth,resulting in a maximum single-point error of 4.56 nm.Meanwhile,the peak-to-valley(PV)value is 0.0758λ,and the simple repeatability of root mean square(SR-RMS)value is 0.00025λ,which aligns well with the measured results obtained by ZYGO.In particular,a significant reduction in the measurement time(reduced by a factor of 48)is achieved compared with that of the traditional phase-shifting method.Our proposed method provides an efficient,rapid,and accurate method for obtaining the surface profiles of optical components with different diameters without employing a phase-shifting approach,which is highly desired in large-aperture interferometric measurement systems.展开更多
Zenith Tropospheric Delay(ZTD)is an important factor that restricts the high-precision positioning of global navigation satellite system(GNSS),and it is of great significance in establishing a real-time and highprecis...Zenith Tropospheric Delay(ZTD)is an important factor that restricts the high-precision positioning of global navigation satellite system(GNSS),and it is of great significance in establishing a real-time and highprecision ZTD model.However,existing ZTD models only consider the impact of linear terms on ZTD estimation,whereas the nonlinear factors have rarely been investigated before and thus become the focus of this study.A real-time and high-precision ZTD model for large height difference area is proposed by considering the linear and nonlinear characteristics of ZTD spatiotemporal variations and is called the realtime linear and nonlinearity ZTD(RLNZ)model.This model uses the ZTD estimated from the Global Pressure and Temperature 3(GPT3)model as the initial value.The linear impacts of periodic term and height on the estimation of ZTD difference between GNSS and GPT3 model are first considered.In addition,nonlinear factors such as geographical location and time are further used to fit the remaining nonlinear ZTD residuals using the general regression neural network method.Finally,the RLNZ-derived ZTD is obtained at an arbitrary location.The western United States,with height difference ranging from-500 to 4000 m,is selected,and the hourly ZTD of 484 GNSS stations provided by the Nevada Geodetic Laboratory(NGL)and the data of 9 radiosonde(RS)stations in the year 2021 are used.Experiment results show that a better performance of ZTD estimation can be retrieved from the proposed RLNZ model when compared with the GPT3 model.Statistical results show the averaged root mean square(RMS),Bias,and mean absolute error(MAE)of ZTD from GPT3 and RLNZ models are 33.7/0.8/25.7 mm and 22.6/0.1/17.4 mm,respectively.The average improvement rate of the RLNZ model is 33% when compared to the GPT3 model.Finally,the application of the proposed RLNZ model in simulated real-time Precise Point Positioning(PPP)indicates that the accuracy of PPP in N,E and U components is improved by 8%,2%,and 6% when compared with that from the GPT3-based PPP.Meanwhile,the convergence time in N and U components is improved by 23% and 7%,respectively.Such results verify the superiority of the proposed RLNZ model in retrieving realtime ZTD maps for GNSS positioning and navigation applications.展开更多
Surface-enhanced Raman spectroscopy(SERS)has evolved from a laboratory technique to a practical tool for ultra-sensitive detection,particularly in the biomedical field,where precise molecular identification is crucial...Surface-enhanced Raman spectroscopy(SERS)has evolved from a laboratory technique to a practical tool for ultra-sensitive detection,particularly in the biomedical field,where precise molecular identification is crucial.Despite significant advancements,a gap remains in the literature,as no comprehensive review systematically addresses the high-precision construction of SERS substrates for ultrasensitive biomedical detection.This review fills that gap by exploring recent progress in fabricating high-precision SERS substrates,emphasizing their role in enabling ultrasensitive bio-medical sensors.We carefully examine the key to these advancements is the precision engineering of substrates,including noble metals,semiconductors,carbon-based materials,and two-dimensional materials,which is essential for achieving the high sensitivity required for ultrasensitive detection.Applications in biomedical diagnostics and molecular analysis are highlighted.Finally,we address the challenges in SERS substrate preparation and outline future directions,focusing on improvement strategies,design concepts,and expanding applications for these advanced materials.展开更多
The elliptic integral method(EIM) is an efficient analytical approach for analyzing large deformations of elastic beams. However, it faces the following challenges.First, the existing EIM can only handle cases with kn...The elliptic integral method(EIM) is an efficient analytical approach for analyzing large deformations of elastic beams. However, it faces the following challenges.First, the existing EIM can only handle cases with known deformation modes. Second,the existing EIM is only applicable to Euler beams, and there is no EIM available for higher-precision Timoshenko and Reissner beams in cases where both force and moment are applied at the end. This paper proposes a general EIM for Reissner beams under arbitrary boundary conditions. On this basis, an analytical equation for determining the sign of the elliptic integral is provided. Based on the equation, we discover a class of elliptic integral piecewise points that are distinct from inflection points. More importantly, we propose an algorithm that automatically calculates the number of inflection points and other piecewise points during the nonlinear solution process, which is crucial for beams with unknown or changing deformation modes.展开更多
With the intensifying competition in the integrated circuit(IC)industry,the high turnover rate of integrated circuit engineers has become a prominent issue affecting the technological continuity of high-precision,spec...With the intensifying competition in the integrated circuit(IC)industry,the high turnover rate of integrated circuit engineers has become a prominent issue affecting the technological continuity of high-precision,specialized,and innovative enterprises.As a representative of such enterprises,JL Technology has faced challenges to its R&D efficiency due to talent loss in recent years.This study takes this enterprise as a case to explore feasible paths to reduce turnover rates through optimizing training and career development systems.The research designs a method combining learning maps and talent maps,utilizes a competency model to clarify the direction for engineers’skill improvement,implements talent classification management using a nine-grid model,and achieves personalized training through Individual Development Plans(IDPs).Analysis of the enterprise’s historical data reveals that the main reasons for turnover are unclear career development paths and insufficient resources for skill improvement.After pilot implementation,the turnover rate in core departments decreased by 12%,and employee satisfaction with training increased by 24%.The results indicate that matching systematic talent reviews with dynamic learning resources can effectively enhance engineers’sense of belonging.This study provides a set of highly operational management tools for small and medium-sized high-precision,specialized,and innovative technology enterprises,verifies their applicability in such enterprises,and offers replicable experiences for similar enterprises to optimize their talent strategies[1].展开更多
In ecological environments,the survival environment of species is often inhomogeneous,and the reproductive process is affected by time delay.System with nonlocal effects and delay can more accurately simulate changes ...In ecological environments,the survival environment of species is often inhomogeneous,and the reproductive process is affected by time delay.System with nonlocal effects and delay can more accurately simulate changes in population density.In this paper,we consider a reaction-diffusion-advection model with nonlocal delay and Dirichlet boundary conditions.First of all,we investigate the well-posedness of solution of model.Then,the existence of positive steady state is proofed by implicit function theorem.Based on a priori estimate for the eigenvalue,we prove the stability of the positive steady state and conclude the associated distribution of Hopf bifurcation.Our research indicates that the combined effects of nonlocal and time delays have a certain impact on the dynamics of the model.展开更多
Delay Alignment Modulation(DAM)is an innovative broadband modulation technique well-suited for millimeter Wave(mm Wave)and Terahertz(THz)massive Multiple-Input Multiple-Output(MIMO)communication systems.Leveraging the...Delay Alignment Modulation(DAM)is an innovative broadband modulation technique well-suited for millimeter Wave(mm Wave)and Terahertz(THz)massive Multiple-Input Multiple-Output(MIMO)communication systems.Leveraging the high spatial resolution and sparsity of multi-path channels,DAM effectively mitigates Inter-Symbol Interference(ISI)by aligning all multi-path components through a combination of delay pre-compensation(or post-compensation)and path-based beamforming.As such,ISI is eliminated while preserving multi-path power gains.In this paper,we investigate multi-user double-side DAM,which incorporates both delay pre-compensation at the transmitter and post-compensation at the receiver,in contrast to prior works that primarily focus on singleside DAM with only delay pre-compensation.Firstly,we derive the constraint on the number of introduced delays and formulate the corresponding delay pre/post-compensation vectors tailored for multi-user double-side DAM,given a specific number of delay compensations.Furthermore,we demonstrate that when the number of Base Stations(BSs)/User Equipment(UE)antennas is sufficiently large,single-side DAM—where delay compensation is performed only at the BS/UE—is preferable to double-side DAM,since the former results in less ISI to be spatially eliminated.Next,we propose two low-complexity path-based beamforming strategies based on the eigen-beamforming transmission and ISI-Zero Forcing(ZF),respectively.On this basis,we further analyze the achievable sum rates.Simulation results verify that with a sufficiently large number of BS/UE antennas,singleside DAM is adequate for ISI elimination.Moreover,compared to the benchmarking scheme of Orthogonal Frequency Division Multiplexing(OFDM),multi-user BS-side DAM achieves higher spectral efficiency and lower Peak-to-Average Power Ratio(PAPR).展开更多
To improve the estimation accuracy,a novel time delay estimation(TDE)method based on the closed-form offset compensation is proposed.Firstly,we use the generalized cross-correlation with phase transform(GCC-PHAT)metho...To improve the estimation accuracy,a novel time delay estimation(TDE)method based on the closed-form offset compensation is proposed.Firstly,we use the generalized cross-correlation with phase transform(GCC-PHAT)method to obtain the initial TDE.Secondly,a signal model using normalized cross spectrum is established,and the noise subspace is extracted by eigenvalue decomposition(EVD)of covariance matrix.Using the orthogonal relation between the steering vector and the noise subspace,the first-order Taylor expansion is carried out on the steering vector reconstructed by the initial TDE.Finally,the offsets are compensated via simple least squares(LS).Compared to other state-of-the-art methods,the proposed method significantly reduces the computational complexity and achieves better estimation performance.Experiments on both simulation and real-world data verify the efficiency of the proposed approach.展开更多
The flight envelope of Air Turbo Rocket(ATR)engines is broader compared to conventional aero-engines,and designing a full-envelope controller using traditional methods poses significant challenges due to a burdensome ...The flight envelope of Air Turbo Rocket(ATR)engines is broader compared to conventional aero-engines,and designing a full-envelope controller using traditional methods poses significant challenges due to a burdensome design process.To address this issue,this paper proposes a self-learning neural network controller design method based on Reinforcement Learning(RL).Additionally,a method for predictive compensation and stability rewards is proposed to reduce the system oscillation caused by actuator delay.This approach simplifies the actuator to a firstorder inertial element exhibiting pure delay.A simulation environment for the ATR engineactuator system is first established.Based on this environment,a self-learning neural network controller using a predictive compensator and the Proximal Policy Optimization(PPO)algorithm is then developed.Furthermore,the temporal difference signals from the controller output are integrated into the reward function to enhance system stability.The proposed method is validated through numerical simulations and semi-physical experiments.The numerical simulation results demonstrate that the proposed method increases the system's tolerance to delays from 20 ms to 400 ms.Under an actuator delay of 400 ms,the average steady-state error remains less than0.1%,the overshoot is limited to 1%,and the settling time does not exceed 3 s.Moreover,compared to the traditional method,the proposed method exhibits higher adaptability to model errors and variations in flight conditions.In the conducted semi-physical simulation experiments,the proposed method achieves stable control of a real electric pump.展开更多
The development of polymeric materials that exhibit blue thermally activated delayed fluorescence(TADF)is of great interest for optoelectronic applications.However,achieving TADF in polymers often requires an elaborat...The development of polymeric materials that exhibit blue thermally activated delayed fluorescence(TADF)is of great interest for optoelectronic applications.However,achieving TADF in polymers often requires an elaborate monomer design.The high-energy local triplet state(^(3)LE)of carbazole complicates its application despite the molecular orbital arrangement being suitable for blue emission.Here,we present an approach to polymer design that makes it possible to solve this problem.We demonstrate the in situ formation of a TADF donor-acceptor system during Suzuki polycondensation,creating an extended carbazole-based donor matrix coupled with a triazine acceptor.The resulting polymer exhibited efficient TADF with a low energy gap(ΔE_(ST))value if a phenyl N-substituent,enabling essential electron delocalization,was present in the carbazole moiety.This work establishes a versatile platform for developing carbazole-based TADF polymers,overcoming the fundamental limitations that hinder their widespread application.展开更多
Delayed wound healing following radical gastrectomy remains an important yet underappreciated complication that prolongs hospitalization,increases costs,and undermines patient recovery.In An et al’s recent study,the ...Delayed wound healing following radical gastrectomy remains an important yet underappreciated complication that prolongs hospitalization,increases costs,and undermines patient recovery.In An et al’s recent study,the authors present a machine learning-based risk prediction approach using routinely available clinical and laboratory parameters.Among the evaluated algorithms,a decision tree model demonstrated excellent discrimination,achieving an area under the curve of 0.951 in the validation set and notably identifying all true cases of delayed wound healing at the Youden index threshold.The inclusion of variables such as drainage duration,preoperative white blood cell and neutrophil counts,alongside age and sex,highlights the pragmatic appeal of the model for early postoperative monitoring.Nevertheless,several aspects warrant critical reflection,including the reliance on a postoperative variable(drainage duration),internal validation only,and certain reporting inconsistencies.This letter underscores both the promise and the limitations of adopting interpretable machine learning models in perioperative care.We advocate for transparent reporting,external validation,and careful consideration of clinically actionable timepoints before integration into practice.Ultimately,this work represents a valuable step toward precision risk stratification in gastric cancer surgery,and sets the stage for multicenter,prospective evaluations.展开更多
Time-delayed blasting is widely utilized in engineering to mitigate induced vibration hazards and enhance fragmentation.The underlying vibration reduction principle is the decrease of the charge weight per delay,while...Time-delayed blasting is widely utilized in engineering to mitigate induced vibration hazards and enhance fragmentation.The underlying vibration reduction principle is the decrease of the charge weight per delay,while the potential for further vibration reduction remains debated,largely due to unclear underlying mechanisms.In light of the popularization of electronic detonators and the representativeness of double-hole configurationsfor multiple blastholes,it is essential to investigate the vibration characteristics induced by time-delayed double blastholes.Therefore,a series of doubleborehole experimental blasts was conducted in an underground roadway to clarify the variation in vibration from single-hole to dual-hole conditions.Based on the experimental data and inherent limitations,an exact full-fieldtheoretical model was further employed to systematically analyze the effects of delay time,charge length,and borehole inclination angle on vibrations induced by various doublehole configurations.The experimental data and theoretical analysis reveal that the general scaled distance effectively predicts vibrations in delayed blasting but does not reflectvibration reduction.Increasing delay time causes fluctuatingPPVs,which stabilize slightly above single-hole PPVs as delay times exceed a certain value.The delayed blasting primarily reduces near-fieldfrequencies.Longer charge lengths in double boreholes increase PPV levels and attenuation rates within a certain length,and the vibration behavior of combined long and short charge lengths is governed by the long blasthole.Larger blasthole inclination angles enhance vibration amplitude and reduce PPV attenuation rates.Optimizing inclination angles is more critical than adjusting delay times,and parallel boreholes offer the best vibration control.展开更多
A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescenc...A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.展开更多
Tropospheric zenith wet delay(ZWD)plays a vital role in the analysis of space geodetic observations.In recent years,machine learning methods have been increasingly applied to improve the accuracy of ZWD calculations.H...Tropospheric zenith wet delay(ZWD)plays a vital role in the analysis of space geodetic observations.In recent years,machine learning methods have been increasingly applied to improve the accuracy of ZWD calculations.However,a single machine learning model has limited generalization capabilities.To address these limitations,this study introduces a novel machine learning fusion(MLF)algorithm with stronger generalization capabilities to enhance ZWD modeling and prediction accuracy.The MLF algorithm utilizes a two-layer structure integrating extra trees(ET),backpropagation neural network(BPNN),and linear regression models.By comparing the root mean square error(RMSE)of these models,we found that both ET-based and MLF-based models outperform RF-based and BPNN-based models in terms of internal and external accuracy,across both surface meteorological data-based and blind models.The improvement in exte rnal accuracy is particularly significant in the blind models.Our re sults show that the MLF(with an RMSE of 3.93 cm)and ET(3.99 cm)models outperform the traditional GPT3model(4.07 cm),while the RF(4.21 cm)and BPNN(4.14 cm)have worse external accuracies than the GPT3 model.It is worth noting that the BPNN suffered from overfitting during external accuracy tests,which was avoided by the MLF.In summary,regardless of the availability of surface meteorological data,the MLF-based empirical models demonstrate superior internal and external accuracy compared to the other tested models in this study.展开更多
The increasing demand for flexible displays and wearable electronics has driven extensive efforts to develop stretchable organic lightemitting diodes(OLEDs).A critical challenge in this field is the creation of emissi...The increasing demand for flexible displays and wearable electronics has driven extensive efforts to develop stretchable organic lightemitting diodes(OLEDs).A critical challenge in this field is the creation of emissive layers that combine high efficiency with mechanical robustness.Thermally activated delayed fluorescence(TADF)materials have attracted significant attention as third-generation emitters capable of achieving 100%internal quantum efficiency;however,their application in stretchable OLEDs has been limited.In this study,we propose an elastomer doping strategy.Polyurethane(PU)is incorporated into TADF polymers to improve their mechanical flexibility while maintaining a high luminescent efficiency.The resulting composite films exhibited excellent TADF characteristics and remarkable stretchability(75%).OLEDs fabricated from these materials achieved a maximum external quantum efficiency(EQE)of 14.26%and a peak luminance of 73570 cd·m^(-2),with the PUdoped devices showing a significantly suppressed efficiency roll-off.Additionally,a fully stretchable OLED architecture was designed and operated under tensile strain to maintain stable electroluminescent performance.These results demonstrate that elastomer doping is an effective strategy for balancing the mechanical compliance with optoelectronic performance,offering a promising pathway for the development of high-performance stretchable OLEDs for flexible electronics.展开更多
Delayed neurocognitive recovery following anesthesia and surgery is a common complication in older adult patients.Synapses are fundamental to cognitive function.The activity of synapses heavily depends on the energy s...Delayed neurocognitive recovery following anesthesia and surgery is a common complication in older adult patients.Synapses are fundamental to cognitive function.The activity of synapses heavily depends on the energy supplied by synaptic mitochondria,which are significantly influenced by oxidative stress.Sirtuin 3 is a histone deacetylase located in the mitochondrial matrix that plays a pivotal role in regulating mitochondrial function.However,it remains unclear whether and how sirtuin 3 is involved in the development of delayed cognitive recovery.Therefore,in this study,we investigated the potential role of sirtuin 3 in synapses during delayed neurocognitive recovery.Our results showed that anesthesia and surgery induced cognitive impairment in mice and reduced sirtuin 3 protein expression.Overexpression of sirtuin 3 inhibited opening of the mitochondrial permeability transition pore by reducing acetylation of K166 on cyclophilin D and also rescued cognitive impairment.Aged mice carrying the cyclophilin D-K166R mutation exhibited significantly reduced cognitive impairment.Similarly,administering the mitochondrial permeability transition pore blocker,cyclosporine A,effectively alleviated the decline in synaptic mitochondrial function and cognitive impairment caused by anesthesia and surgery in aged mice.These results indicate that the sirtuin 3/cyclophilin D-K166/mPTP signaling pathway in hippocampal synaptic mitochondria is involved in delayed neurocognitive recovery of aged mice,suggesting this pathway could serve as a potential target for treatment.展开更多
To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition a...To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition and working principle are introduced. The mapping relationship between the feature image coordinates and the measuring space coordinates is established. The method of measuring path planning of small field of view （FOV） images is proposed. With the cooperation of the panoramic image of the object to be measured, the small FOV images with high object plane resolution are acquired automatically. Then, the auxiliary measuring characteristics are constructed and the parameters of the features to be measured are automatically extracted. Experimental results show that the absolute value of relative error is less than 0. 03% when applying the cooperative measurement system to gauge the hole distance of 100 mm nominal size. When the object plane resolving power of the small FOV images is 16 times that of the large FOV image, the measurement accuracy of small FOV images is improved by 14 times compared with the large FOV image. It is suitable for high-precision automatic measurement of two-dimensional complex geometric features distributed on large scale parts.展开更多
Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from ...Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from one or more sensors. Because of the problem that standard ball is deficient as a standard artifact in the coordinate unification of high-precision composite measurement in two dimensions （2D） , a new method is proposed in this paper which uses angle gauge blocks as standard artifacts to achieve coordinate unification between the image sensor and the tactile probe. By comparing the standard ball with the angle gauge block as a standard artifact, theoretical analysis and experimental results are given to prove that it is more precise and more convenient to use angle gauge blocks as standard artifacts to achieve coordinate unification of high-precision composite measurement in two dimensions.展开更多
A reliable multiphase flow simulator is an important tool to improve wellbore integrity and production decision-making.To develop a multiphase flow model with high adaptability and high accuracy,we first build a multi...A reliable multiphase flow simulator is an important tool to improve wellbore integrity and production decision-making.To develop a multiphase flow model with high adaptability and high accuracy,we first build a multiphase flow database with 3561 groups of data and developed a drift closure relationship with stable continuity and high adaptability.Second,a high-order numerical scheme with strong fault capture ability is constructed by effectively combining MUSCL technology,van Albada slope limiter and AUSMV numerical scheme.Finally,the energy equation is coupled into the AUSMV numerical scheme of the drift flow model in the form of finite difference.A transient non-isothermal wellbore multiphase flow model with wide applicability is formed by integrating the three technologies,and the effects of various factors on the calculation accuracy are studied.The accuracy of the simulator is verified by comparing the measurement results with the blowout experiment of a full-scale experimental well.展开更多
文摘This paper presents a novel precision delay circuit design for high-speed data acquisition systems. Many studies have suggested that various advanced electronic measurement apparatuses require that the delay circuit should have a high precision and a short delay interval. Practically, however, such measurement apparatuses are low in preci- sion and long in delay interval at present. The structure and function of a data acquisition system is introduced first; then the principle of ramp-based precision delay circuits and the digitally programmable delay generator is studied and the precision delay circuit is designed. The authors also demonstrated 8-bit programmable delay circuits with a timing pre- cision of 10 ps. Therefore the programmable precision delay circuit here presented has a higher precision, shorter inter- val and more detectable function than any other precision delay circuit.
基金funded by the National Natural Science Foundation of China Instrumentation Program(52327806)Youth Fund of the National Nature Foundation of China(62405020)China Postdoctoral Science Foundation(2024M764131).
文摘Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predominantly on the phase-shifting approach,which involves collecting multiple interferograms and imposes stringent demands on environmental stability.These issues significantly hinder its ability to achieve real-time and dynamic high-precision measurements.Therefore,this study proposes a high-precision large-aperture single-frame interferometric surface profile measurement(LA-SFISPM)method based on deep learning and explores its capability to realize dynamic measurements with high accuracy.The interferogram is matched to the phase by training the data measured using the small aperture.The consistency of the surface features of the small and large apertures is enhanced via contrast learning and feature-distribution alignment.Hence,high-precision phase reconstruction of large-aperture optical components can be achieved without using a phase shifter.The experimental results show that for the tested mirror withΦ=820 mm,the surface profile obtained from LA-SFISPM is subtracted point-by-point from the ground truth,resulting in a maximum single-point error of 4.56 nm.Meanwhile,the peak-to-valley(PV)value is 0.0758λ,and the simple repeatability of root mean square(SR-RMS)value is 0.00025λ,which aligns well with the measured results obtained by ZYGO.In particular,a significant reduction in the measurement time(reduced by a factor of 48)is achieved compared with that of the traditional phase-shifting method.Our proposed method provides an efficient,rapid,and accurate method for obtaining the surface profiles of optical components with different diameters without employing a phase-shifting approach,which is highly desired in large-aperture interferometric measurement systems.
基金supported by the National Natural Science Foundation of China(42274039)Shaanxi Provincial Innovation Capacity Support Plan Project(2023KJXX-050)+2 种基金The Open Grants of the State Key Laboratory of Severe Weather(2023LASW-B18)Scientific and technological research projects for major issues in military medicine and aviation medicine(2022ZZXM012)Local special scientific research plan project of Shaanxi Provincial Department of Education(22JE012)。
文摘Zenith Tropospheric Delay(ZTD)is an important factor that restricts the high-precision positioning of global navigation satellite system(GNSS),and it is of great significance in establishing a real-time and highprecision ZTD model.However,existing ZTD models only consider the impact of linear terms on ZTD estimation,whereas the nonlinear factors have rarely been investigated before and thus become the focus of this study.A real-time and high-precision ZTD model for large height difference area is proposed by considering the linear and nonlinear characteristics of ZTD spatiotemporal variations and is called the realtime linear and nonlinearity ZTD(RLNZ)model.This model uses the ZTD estimated from the Global Pressure and Temperature 3(GPT3)model as the initial value.The linear impacts of periodic term and height on the estimation of ZTD difference between GNSS and GPT3 model are first considered.In addition,nonlinear factors such as geographical location and time are further used to fit the remaining nonlinear ZTD residuals using the general regression neural network method.Finally,the RLNZ-derived ZTD is obtained at an arbitrary location.The western United States,with height difference ranging from-500 to 4000 m,is selected,and the hourly ZTD of 484 GNSS stations provided by the Nevada Geodetic Laboratory(NGL)and the data of 9 radiosonde(RS)stations in the year 2021 are used.Experiment results show that a better performance of ZTD estimation can be retrieved from the proposed RLNZ model when compared with the GPT3 model.Statistical results show the averaged root mean square(RMS),Bias,and mean absolute error(MAE)of ZTD from GPT3 and RLNZ models are 33.7/0.8/25.7 mm and 22.6/0.1/17.4 mm,respectively.The average improvement rate of the RLNZ model is 33% when compared to the GPT3 model.Finally,the application of the proposed RLNZ model in simulated real-time Precise Point Positioning(PPP)indicates that the accuracy of PPP in N,E and U components is improved by 8%,2%,and 6% when compared with that from the GPT3-based PPP.Meanwhile,the convergence time in N and U components is improved by 23% and 7%,respectively.Such results verify the superiority of the proposed RLNZ model in retrieving realtime ZTD maps for GNSS positioning and navigation applications.
基金supported by the projects funded by the Education Department of Shaanxi Provincial Government(NO.23JP116)the Natural Science Fund of Shaanxi Province(NO.2024JC-YBMS-396)+3 种基金the National Natural Science Foundation of China(NO.52171191,52371198,U22A20137)the Constructing National Independent Innovation Demonstration Zones(XM2024XTGXQ05)Shenzhen Science and Technology Innovation Program(JCYJ20220818102215033,GJHZ20210705142542015,JCYJ20220530160811027)Guangdong HUST Industrial Technology Research Institute,Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization(2023B1212060012).
文摘Surface-enhanced Raman spectroscopy(SERS)has evolved from a laboratory technique to a practical tool for ultra-sensitive detection,particularly in the biomedical field,where precise molecular identification is crucial.Despite significant advancements,a gap remains in the literature,as no comprehensive review systematically addresses the high-precision construction of SERS substrates for ultrasensitive biomedical detection.This review fills that gap by exploring recent progress in fabricating high-precision SERS substrates,emphasizing their role in enabling ultrasensitive bio-medical sensors.We carefully examine the key to these advancements is the precision engineering of substrates,including noble metals,semiconductors,carbon-based materials,and two-dimensional materials,which is essential for achieving the high sensitivity required for ultrasensitive detection.Applications in biomedical diagnostics and molecular analysis are highlighted.Finally,we address the challenges in SERS substrate preparation and outline future directions,focusing on improvement strategies,design concepts,and expanding applications for these advanced materials.
基金supported by the National Natural Science Foundation of China (Nos. 12172388 and 12472400)the Guangdong Basic and Applied Basic Research Foundation of China(No. 2025A1515011975)the Scientific Research Project of Guangdong Polytechnic Normal University of China (No. 2023SDKYA010)
文摘The elliptic integral method(EIM) is an efficient analytical approach for analyzing large deformations of elastic beams. However, it faces the following challenges.First, the existing EIM can only handle cases with known deformation modes. Second,the existing EIM is only applicable to Euler beams, and there is no EIM available for higher-precision Timoshenko and Reissner beams in cases where both force and moment are applied at the end. This paper proposes a general EIM for Reissner beams under arbitrary boundary conditions. On this basis, an analytical equation for determining the sign of the elliptic integral is provided. Based on the equation, we discover a class of elliptic integral piecewise points that are distinct from inflection points. More importantly, we propose an algorithm that automatically calculates the number of inflection points and other piecewise points during the nonlinear solution process, which is crucial for beams with unknown or changing deformation modes.
文摘With the intensifying competition in the integrated circuit(IC)industry,the high turnover rate of integrated circuit engineers has become a prominent issue affecting the technological continuity of high-precision,specialized,and innovative enterprises.As a representative of such enterprises,JL Technology has faced challenges to its R&D efficiency due to talent loss in recent years.This study takes this enterprise as a case to explore feasible paths to reduce turnover rates through optimizing training and career development systems.The research designs a method combining learning maps and talent maps,utilizes a competency model to clarify the direction for engineers’skill improvement,implements talent classification management using a nine-grid model,and achieves personalized training through Individual Development Plans(IDPs).Analysis of the enterprise’s historical data reveals that the main reasons for turnover are unclear career development paths and insufficient resources for skill improvement.After pilot implementation,the turnover rate in core departments decreased by 12%,and employee satisfaction with training increased by 24%.The results indicate that matching systematic talent reviews with dynamic learning resources can effectively enhance engineers’sense of belonging.This study provides a set of highly operational management tools for small and medium-sized high-precision,specialized,and innovative technology enterprises,verifies their applicability in such enterprises,and offers replicable experiences for similar enterprises to optimize their talent strategies[1].
基金Supported by the Natural Science Foundation of Shanghai(23ZR1401700)National Natural Science Foundation of China(12471157)。
文摘In ecological environments,the survival environment of species is often inhomogeneous,and the reproductive process is affected by time delay.System with nonlocal effects and delay can more accurately simulate changes in population density.In this paper,we consider a reaction-diffusion-advection model with nonlocal delay and Dirichlet boundary conditions.First of all,we investigate the well-posedness of solution of model.Then,the existence of positive steady state is proofed by implicit function theorem.Based on a priori estimate for the eigenvalue,we prove the stability of the positive steady state and conclude the associated distribution of Hopf bifurcation.Our research indicates that the combined effects of nonlocal and time delays have a certain impact on the dynamics of the model.
基金supported in part by the Natural Science Foundation for Distinguished Young Scholars of Jiangsu Province under Grant BK20240070in part by the National Natural Science Foundation of China under Grant 62071114n part by the Fundamental Research Funds for the Central Universities under Grant 2242022k60004。
文摘Delay Alignment Modulation(DAM)is an innovative broadband modulation technique well-suited for millimeter Wave(mm Wave)and Terahertz(THz)massive Multiple-Input Multiple-Output(MIMO)communication systems.Leveraging the high spatial resolution and sparsity of multi-path channels,DAM effectively mitigates Inter-Symbol Interference(ISI)by aligning all multi-path components through a combination of delay pre-compensation(or post-compensation)and path-based beamforming.As such,ISI is eliminated while preserving multi-path power gains.In this paper,we investigate multi-user double-side DAM,which incorporates both delay pre-compensation at the transmitter and post-compensation at the receiver,in contrast to prior works that primarily focus on singleside DAM with only delay pre-compensation.Firstly,we derive the constraint on the number of introduced delays and formulate the corresponding delay pre/post-compensation vectors tailored for multi-user double-side DAM,given a specific number of delay compensations.Furthermore,we demonstrate that when the number of Base Stations(BSs)/User Equipment(UE)antennas is sufficiently large,single-side DAM—where delay compensation is performed only at the BS/UE—is preferable to double-side DAM,since the former results in less ISI to be spatially eliminated.Next,we propose two low-complexity path-based beamforming strategies based on the eigen-beamforming transmission and ISI-Zero Forcing(ZF),respectively.On this basis,we further analyze the achievable sum rates.Simulation results verify that with a sufficiently large number of BS/UE antennas,singleside DAM is adequate for ISI elimination.Moreover,compared to the benchmarking scheme of Orthogonal Frequency Division Multiplexing(OFDM),multi-user BS-side DAM achieves higher spectral efficiency and lower Peak-to-Average Power Ratio(PAPR).
基金supported in part by National Key R&D Program of China under Grants 2020YFB1807602 and 2020YFB1807600National Science Foundation of China(61971217,61971218,61631020,61601167)+1 种基金the Fund of Sonar Technology Key Laboratory(Range estimation and location technology of passive target viamultiple array combination),Jiangsu Planned Projects for Postdoctoral Research Funds(2020Z013)China Postdoctoral Science Foundation(2020M681585).
文摘To improve the estimation accuracy,a novel time delay estimation(TDE)method based on the closed-form offset compensation is proposed.Firstly,we use the generalized cross-correlation with phase transform(GCC-PHAT)method to obtain the initial TDE.Secondly,a signal model using normalized cross spectrum is established,and the noise subspace is extracted by eigenvalue decomposition(EVD)of covariance matrix.Using the orthogonal relation between the steering vector and the noise subspace,the first-order Taylor expansion is carried out on the steering vector reconstructed by the initial TDE.Finally,the offsets are compensated via simple least squares(LS).Compared to other state-of-the-art methods,the proposed method significantly reduces the computational complexity and achieves better estimation performance.Experiments on both simulation and real-world data verify the efficiency of the proposed approach.
基金co-supported by the National Science and Technology Major Project(No.J2019-Ⅲ-0010-0054)the National Natural Science Foundation of China(No.52336002)。
文摘The flight envelope of Air Turbo Rocket(ATR)engines is broader compared to conventional aero-engines,and designing a full-envelope controller using traditional methods poses significant challenges due to a burdensome design process.To address this issue,this paper proposes a self-learning neural network controller design method based on Reinforcement Learning(RL).Additionally,a method for predictive compensation and stability rewards is proposed to reduce the system oscillation caused by actuator delay.This approach simplifies the actuator to a firstorder inertial element exhibiting pure delay.A simulation environment for the ATR engineactuator system is first established.Based on this environment,a self-learning neural network controller using a predictive compensator and the Proximal Policy Optimization(PPO)algorithm is then developed.Furthermore,the temporal difference signals from the controller output are integrated into the reward function to enhance system stability.The proposed method is validated through numerical simulations and semi-physical experiments.The numerical simulation results demonstrate that the proposed method increases the system's tolerance to delays from 20 ms to 400 ms.Under an actuator delay of 400 ms,the average steady-state error remains less than0.1%,the overshoot is limited to 1%,and the settling time does not exceed 3 s.Moreover,compared to the traditional method,the proposed method exhibits higher adaptability to model errors and variations in flight conditions.In the conducted semi-physical simulation experiments,the proposed method achieves stable control of a real electric pump.
基金supported by the Russian Science Foundation (No. 25-13-00300)the Centre for Optical and Laser Materials Research (SPbSU) and Saint Petersburg State University for measuring the quantum yields of luminescence within the framework of research project(No.125021902439-8)。
文摘The development of polymeric materials that exhibit blue thermally activated delayed fluorescence(TADF)is of great interest for optoelectronic applications.However,achieving TADF in polymers often requires an elaborate monomer design.The high-energy local triplet state(^(3)LE)of carbazole complicates its application despite the molecular orbital arrangement being suitable for blue emission.Here,we present an approach to polymer design that makes it possible to solve this problem.We demonstrate the in situ formation of a TADF donor-acceptor system during Suzuki polycondensation,creating an extended carbazole-based donor matrix coupled with a triazine acceptor.The resulting polymer exhibited efficient TADF with a low energy gap(ΔE_(ST))value if a phenyl N-substituent,enabling essential electron delocalization,was present in the carbazole moiety.This work establishes a versatile platform for developing carbazole-based TADF polymers,overcoming the fundamental limitations that hinder their widespread application.
文摘Delayed wound healing following radical gastrectomy remains an important yet underappreciated complication that prolongs hospitalization,increases costs,and undermines patient recovery.In An et al’s recent study,the authors present a machine learning-based risk prediction approach using routinely available clinical and laboratory parameters.Among the evaluated algorithms,a decision tree model demonstrated excellent discrimination,achieving an area under the curve of 0.951 in the validation set and notably identifying all true cases of delayed wound healing at the Youden index threshold.The inclusion of variables such as drainage duration,preoperative white blood cell and neutrophil counts,alongside age and sex,highlights the pragmatic appeal of the model for early postoperative monitoring.Nevertheless,several aspects warrant critical reflection,including the reliance on a postoperative variable(drainage duration),internal validation only,and certain reporting inconsistencies.This letter underscores both the promise and the limitations of adopting interpretable machine learning models in perioperative care.We advocate for transparent reporting,external validation,and careful consideration of clinically actionable timepoints before integration into practice.Ultimately,this work represents a valuable step toward precision risk stratification in gastric cancer surgery,and sets the stage for multicenter,prospective evaluations.
基金supported by the National Natural Science Foundation of China(Grant Nos.42407267 and 52374152)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20220975).
文摘Time-delayed blasting is widely utilized in engineering to mitigate induced vibration hazards and enhance fragmentation.The underlying vibration reduction principle is the decrease of the charge weight per delay,while the potential for further vibration reduction remains debated,largely due to unclear underlying mechanisms.In light of the popularization of electronic detonators and the representativeness of double-hole configurationsfor multiple blastholes,it is essential to investigate the vibration characteristics induced by time-delayed double blastholes.Therefore,a series of doubleborehole experimental blasts was conducted in an underground roadway to clarify the variation in vibration from single-hole to dual-hole conditions.Based on the experimental data and inherent limitations,an exact full-fieldtheoretical model was further employed to systematically analyze the effects of delay time,charge length,and borehole inclination angle on vibrations induced by various doublehole configurations.The experimental data and theoretical analysis reveal that the general scaled distance effectively predicts vibrations in delayed blasting but does not reflectvibration reduction.Increasing delay time causes fluctuatingPPVs,which stabilize slightly above single-hole PPVs as delay times exceed a certain value.The delayed blasting primarily reduces near-fieldfrequencies.Longer charge lengths in double boreholes increase PPV levels and attenuation rates within a certain length,and the vibration behavior of combined long and short charge lengths is governed by the long blasthole.Larger blasthole inclination angles enhance vibration amplitude and reduce PPV attenuation rates.Optimizing inclination angles is more critical than adjusting delay times,and parallel boreholes offer the best vibration control.
文摘A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.
基金funded by National Natural Science Foundation of China Key Program(12431014)Key Project of Hunan Education Department(22A0126)+1 种基金Natural Science Foundation of Hunan Province(2022JJ30555)Postgraduate Scientific Research Innovation Project of Xiangtan University(XDCX2024Y172)。
文摘Tropospheric zenith wet delay(ZWD)plays a vital role in the analysis of space geodetic observations.In recent years,machine learning methods have been increasingly applied to improve the accuracy of ZWD calculations.However,a single machine learning model has limited generalization capabilities.To address these limitations,this study introduces a novel machine learning fusion(MLF)algorithm with stronger generalization capabilities to enhance ZWD modeling and prediction accuracy.The MLF algorithm utilizes a two-layer structure integrating extra trees(ET),backpropagation neural network(BPNN),and linear regression models.By comparing the root mean square error(RMSE)of these models,we found that both ET-based and MLF-based models outperform RF-based and BPNN-based models in terms of internal and external accuracy,across both surface meteorological data-based and blind models.The improvement in exte rnal accuracy is particularly significant in the blind models.Our re sults show that the MLF(with an RMSE of 3.93 cm)and ET(3.99 cm)models outperform the traditional GPT3model(4.07 cm),while the RF(4.21 cm)and BPNN(4.14 cm)have worse external accuracies than the GPT3 model.It is worth noting that the BPNN suffered from overfitting during external accuracy tests,which was avoided by the MLF.In summary,regardless of the availability of surface meteorological data,the MLF-based empirical models demonstrate superior internal and external accuracy compared to the other tested models in this study.
基金supported by the National Natural Science Foundation of China(Nos.T2441002,22525506,U24A20137,and U22A6002)Strategic Priority Research Program of CAS(No.XDB0520101)+1 种基金National Key R&D Program of China(No.2023YFB3609000)CAS Project for Young Scientists in Basic Research(No.YSBR-053)。
文摘The increasing demand for flexible displays and wearable electronics has driven extensive efforts to develop stretchable organic lightemitting diodes(OLEDs).A critical challenge in this field is the creation of emissive layers that combine high efficiency with mechanical robustness.Thermally activated delayed fluorescence(TADF)materials have attracted significant attention as third-generation emitters capable of achieving 100%internal quantum efficiency;however,their application in stretchable OLEDs has been limited.In this study,we propose an elastomer doping strategy.Polyurethane(PU)is incorporated into TADF polymers to improve their mechanical flexibility while maintaining a high luminescent efficiency.The resulting composite films exhibited excellent TADF characteristics and remarkable stretchability(75%).OLEDs fabricated from these materials achieved a maximum external quantum efficiency(EQE)of 14.26%and a peak luminance of 73570 cd·m^(-2),with the PUdoped devices showing a significantly suppressed efficiency roll-off.Additionally,a fully stretchable OLED architecture was designed and operated under tensile strain to maintain stable electroluminescent performance.These results demonstrate that elastomer doping is an effective strategy for balancing the mechanical compliance with optoelectronic performance,offering a promising pathway for the development of high-performance stretchable OLEDs for flexible electronics.
基金supported by the National Natural Science Foundation of China,Nos.81701040(to HM),82071180(to HM),82271206(to TL),82171191(to YW),82371211(to YW)the Natural Science Foundation of Beijing,No.7212023(to HM)Key Subject of the Natural Science Foundation ofJiangsu Province for Colleges and Universities,No.23KJA320009(to YW).
文摘Delayed neurocognitive recovery following anesthesia and surgery is a common complication in older adult patients.Synapses are fundamental to cognitive function.The activity of synapses heavily depends on the energy supplied by synaptic mitochondria,which are significantly influenced by oxidative stress.Sirtuin 3 is a histone deacetylase located in the mitochondrial matrix that plays a pivotal role in regulating mitochondrial function.However,it remains unclear whether and how sirtuin 3 is involved in the development of delayed cognitive recovery.Therefore,in this study,we investigated the potential role of sirtuin 3 in synapses during delayed neurocognitive recovery.Our results showed that anesthesia and surgery induced cognitive impairment in mice and reduced sirtuin 3 protein expression.Overexpression of sirtuin 3 inhibited opening of the mitochondrial permeability transition pore by reducing acetylation of K166 on cyclophilin D and also rescued cognitive impairment.Aged mice carrying the cyclophilin D-K166R mutation exhibited significantly reduced cognitive impairment.Similarly,administering the mitochondrial permeability transition pore blocker,cyclosporine A,effectively alleviated the decline in synaptic mitochondrial function and cognitive impairment caused by anesthesia and surgery in aged mice.These results indicate that the sirtuin 3/cyclophilin D-K166/mPTP signaling pathway in hippocampal synaptic mitochondria is involved in delayed neurocognitive recovery of aged mice,suggesting this pathway could serve as a potential target for treatment.
基金The National Natural Science Foundation of China(No.51175267)the Natural Science Foundation of Jiangsu Province(No.BK2010481)+2 种基金the Ph.D.Programs Foundation of Ministry of Education of China(No.20113219120004)China Postdoctoral Science Foundation(No.20100481148)the Postdoctoral Science Foundation of Jiangsu Province(No.1001004B)
文摘To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition and working principle are introduced. The mapping relationship between the feature image coordinates and the measuring space coordinates is established. The method of measuring path planning of small field of view （FOV） images is proposed. With the cooperation of the panoramic image of the object to be measured, the small FOV images with high object plane resolution are acquired automatically. Then, the auxiliary measuring characteristics are constructed and the parameters of the features to be measured are automatically extracted. Experimental results show that the absolute value of relative error is less than 0. 03% when applying the cooperative measurement system to gauge the hole distance of 100 mm nominal size. When the object plane resolving power of the small FOV images is 16 times that of the large FOV image, the measurement accuracy of small FOV images is improved by 14 times compared with the large FOV image. It is suitable for high-precision automatic measurement of two-dimensional complex geometric features distributed on large scale parts.
基金National Key Scientific Instrument and Equipment Development Project(No.2013YQ170539)
文摘Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from one or more sensors. Because of the problem that standard ball is deficient as a standard artifact in the coordinate unification of high-precision composite measurement in two dimensions （2D） , a new method is proposed in this paper which uses angle gauge blocks as standard artifacts to achieve coordinate unification between the image sensor and the tactile probe. By comparing the standard ball with the angle gauge block as a standard artifact, theoretical analysis and experimental results are given to prove that it is more precise and more convenient to use angle gauge blocks as standard artifacts to achieve coordinate unification of high-precision composite measurement in two dimensions.
基金The work was supported by the National Natural Science Foundation of China(No.51874045)National Natural Science Foundation-Youth Foundation(52104056)+2 种基金Department of Natural Resources of Guangdong Province(GDNRC[2021]56)Postdoctoral innovative talents support program in China(BX2021374)Scientific Research Program of Hubei Provincial Department of Education(T2021004).
文摘A reliable multiphase flow simulator is an important tool to improve wellbore integrity and production decision-making.To develop a multiphase flow model with high adaptability and high accuracy,we first build a multiphase flow database with 3561 groups of data and developed a drift closure relationship with stable continuity and high adaptability.Second,a high-order numerical scheme with strong fault capture ability is constructed by effectively combining MUSCL technology,van Albada slope limiter and AUSMV numerical scheme.Finally,the energy equation is coupled into the AUSMV numerical scheme of the drift flow model in the form of finite difference.A transient non-isothermal wellbore multiphase flow model with wide applicability is formed by integrating the three technologies,and the effects of various factors on the calculation accuracy are studied.The accuracy of the simulator is verified by comparing the measurement results with the blowout experiment of a full-scale experimental well.
