The high-current pulsed electron beam(HCPEB) treatment with current density 6 J/cm^2 was applied on AZ91 Mg alloy to improve its corrosion resistance. Results showed that the net-like Mg_(17)Al_(12) disappeared on the...The high-current pulsed electron beam(HCPEB) treatment with current density 6 J/cm^2 was applied on AZ91 Mg alloy to improve its corrosion resistance. Results showed that the net-like Mg_(17)Al_(12) disappeared on the surface of AZ91 Mg alloy after irradiation by HCPEB, which was instead of supersaturated Al element on the surface. Nevertheless, the application of HCPEB also led to the formation of crater-like and groove-like structures as well as micro-cracks on the surface of AZ91 Mg alloy. After HCPEB treatment by 3, 5 and 10 pulses, the AZ91 Mg alloy exhibited better corrosion resistance.However, the increasing amount of micro-cracks reduced the anti-corrosive properties of AZ91 Mg alloy as the pulse increased to 20 and 30.展开更多
The gradual advances of offshore oil and gas exploitation and the development tendency of equipment integration have prompted the design of a new type of the high-current composite umbilical to meet development needs....The gradual advances of offshore oil and gas exploitation and the development tendency of equipment integration have prompted the design of a new type of the high-current composite umbilical to meet development needs.In order to study the mechanical behavior of the high-current composite umbilical(HCCU)and provide design suggestions,a theoretical analysis framework of the tension-torsion coupled behavior of the spirally wound structure is proposed,which focuses more on the radial mechanical behavior.Then,by considering the mechanical and thermal conditions during the operation of HCCU,a semi-analytical method of the tension and torsion stiffness of the high-current composite umbilical considering the temperature effect is established.Furthermore,a practical case of HCCU is given,and the thermal effect on the radial and axial mechanical behaviors are analyzed.It is found that the thermal effect has a significant influence on the radial stiffness,and shows non-linear variation characteristics.Finally,the sensitivity analysis is carried out to study the influence of the design parameter on the stiffness of tension and torsion.The results indicated that the equivalent radial stiffness and helical angle have obvious effect on the tension-torsion coupled stiffness,which can provide reasonable reference for the design of HCCU.展开更多
The present paper reports the rapid surface alloying induced by the bombardment of high-current pulsed electron beam. Two kinds of substrate materials were examined to show this effect. The first sample was a pure Al ...The present paper reports the rapid surface alloying induced by the bombardment of high-current pulsed electron beam. Two kinds of substrate materials were examined to show this effect. The first sample was a pure Al metal pre-coated with fine carbon powders prior to the bombardment, and the second alloy is the D2-Crl2MolVl mould steel pre-coated with Cr, Ti, and TiN powders. The surface elements diffuse about several micrometers into the substrate materials only after several bombardments. Tribological behaviors of these samples were characterized and significant improvement in wear resistance was found. Finally, a TEM analysis reveals the presence of stress waves generated by coupled thermal and stress fields, which was considered as the main cause of the enhanced properties.展开更多
Ti–Al surface alloy was fabricated using a cyclic pulsed liquid-phase mixing of predeposited 100 nm Al film with a-Ti substrate by low-energy high-current electron beam. Electron probe micro-analysis（EPMA）,grazing ...Ti–Al surface alloy was fabricated using a cyclic pulsed liquid-phase mixing of predeposited 100 nm Al film with a-Ti substrate by low-energy high-current electron beam. Electron probe micro-analysis（EPMA）,grazing incidence X-ray diffraction analysis（GIXRD）,transmission electron microscopy（TEM）, and nanoindentation were used to investigate the characterization of Ti–Al surface alloy. The experimental results show that the thickness of alloy layer is ＊3 lm, and the content of Al in the ＊1 lm thickness surface layer is ＊60 at%. The tetragonal TiAl and TiAl2intermetallics were synthesized at the top surface, which have nanocrystalline structure.The main phase formed in the ＊2.5 lm thick surface is TiAl, and there are few TiAl2and Ti3Al phase for the alloy.Dislocation is enhanced in the alloyed layer. The nanohardness of Ti–Al surface alloy increased significantly compared with a-Ti substrate due to the nanostructure and enhanced dislocation. Since the e-beam remelted repeatedly, the Ti–Al surface alloy mixed sufficiently with Ti substrate. Moreover, there is no obvious boundary between the alloyed layer and substrate.展开更多
One should pay attention to quite a lot of factors when the emittance of high-current ion beam is measured. The background subtraction and threshold setting,the measuring method of pulsed beam emittance,as well as the...One should pay attention to quite a lot of factors when the emittance of high-current ion beam is measured. The background subtraction and threshold setting,the measuring method of pulsed beam emittance,as well as the error sources in the emittance measurements and its elimination or correction are discussed based on the experience during the R&D of three emittance measurement units for high-current ion beams at Peking University.展开更多
In this paper, we present an experimental investigation of deformation twinning in polycrystalline aluminum exposed to high-current pulsed electron beam (HCPEB) irradiation. The residual tensile stress with about 10 2...In this paper, we present an experimental investigation of deformation twinning in polycrystalline aluminum exposed to high-current pulsed electron beam (HCPEB) irradiation. The residual tensile stress with about 10 2 MPa was introduced in the irradiated surface layer. The feature characteristic irradiated with various numbers of pulses was investigated. The formation of a large number of twin bands on the surface irradiated with multiple pulses was determined. The experimental observations indicated that the deformation twinning was indeed triggered during HCPEB irradiation. It is suggested that high value of stress and strain rate induced by rapid heating and cooling due to HCPEB irradiation may cause the shifting of whole atomic planes simultaneously. Additionally, some slipping systems may be suppressed due to the geometric confinement by thinned size of surface layer, which can promote the initiation of deformation twinning.展开更多
Energy recovery linacs are promising for achieving high average current with superior beam quality.The key component for accelerating such high-current beams is the superconducting radio-frequency cavity.The design of...Energy recovery linacs are promising for achieving high average current with superior beam quality.The key component for accelerating such high-current beams is the superconducting radio-frequency cavity.The design of a 1.3 GHz five-cell high-current superconducting cavity has been carried out under cooperation between Peking University and the Argonne National Laboratory.The radio-frequency properties,damping of the higher order modes,multipacting and mechanical features of this cavity have been discussed and the final design is presented.展开更多
N-type Si(111) wafers have been processed by high-current pulsed electron beam(HCPEB) treatment with an increasing number of irradiation(1, 10 and 20pulses). The results of this work show that a highly porous nanostru...N-type Si(111) wafers have been processed by high-current pulsed electron beam(HCPEB) treatment with an increasing number of irradiation(1, 10 and 20pulses). The results of this work show that a highly porous nanostructure was formed after irradiation. Moreover, the high-density Si nanocrystals(Si-ncs) about 3 nm were distributed on the surface of Si wafers and exhibited3.02 e V Photoluminescence(PL) emission in blue band.The PL intensity increases with the increase in the Si-ncs' density in accordance with the quantum confinement model, which can be ascribed to the different pulse time of HCPEB treatment. The possible formation mechanisms of micropores and Si-ncs are discussed.展开更多
The Advanced Photon Source （APS） at Argonne National Laboratory is considering the development of a superconducting linac-based fourth-generation hard X-ray source to meet future scientific needs of the hard X-ray u...The Advanced Photon Source （APS） at Argonne National Laboratory is considering the development of a superconducting linac-based fourth-generation hard X-ray source to meet future scientific needs of the hard X-ray user community. This work specifically focuses on the design of an optimized 5-cell superconducting radio-frequency structure well suited for a high-energy, high-beam-current energy recovery linac. The cavity design parameters are based on the APS storage ring nominal 7 GeV and 100 mA beam operation. A high-current 5-cell cw superconducting cavity operating at 1.4 GHz has been designed. In order to achieve a high current, the accelerating cavity shape has been optimized and large end-cell beam pipes have been adopted. The beam break-up threshold of the cavity has been estimated using the code TDBBU, which predicts a high threshold beam current for a 7 GeV energy recovery linac model. A copper prototype cavity has been fabricated that uses half-cell modules, initially assembled by clamping the cells together.展开更多
基金the finacial support from the National Natural Science Foundation of China(Nos.51771128 and 51771129)the Projects of International Cooperation in Shanxi(No.201703D421039)the Natural Science Foundation of Shanxi(No.201601D011034)
文摘The high-current pulsed electron beam(HCPEB) treatment with current density 6 J/cm^2 was applied on AZ91 Mg alloy to improve its corrosion resistance. Results showed that the net-like Mg_(17)Al_(12) disappeared on the surface of AZ91 Mg alloy after irradiation by HCPEB, which was instead of supersaturated Al element on the surface. Nevertheless, the application of HCPEB also led to the formation of crater-like and groove-like structures as well as micro-cracks on the surface of AZ91 Mg alloy. After HCPEB treatment by 3, 5 and 10 pulses, the AZ91 Mg alloy exhibited better corrosion resistance.However, the increasing amount of micro-cracks reduced the anti-corrosive properties of AZ91 Mg alloy as the pulse increased to 20 and 30.
基金financially supported by the National Key R&D Program of China(Grant No.2021YFA1003501)the National Natural Science Foundation of China(Grant Nos.U1906233 and 52001088)+1 种基金the Key R&D Program of Shandong Province(Grant No.2019JZZY010801)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20ZD213 and DUT20LAB308)。
文摘The gradual advances of offshore oil and gas exploitation and the development tendency of equipment integration have prompted the design of a new type of the high-current composite umbilical to meet development needs.In order to study the mechanical behavior of the high-current composite umbilical(HCCU)and provide design suggestions,a theoretical analysis framework of the tension-torsion coupled behavior of the spirally wound structure is proposed,which focuses more on the radial mechanical behavior.Then,by considering the mechanical and thermal conditions during the operation of HCCU,a semi-analytical method of the tension and torsion stiffness of the high-current composite umbilical considering the temperature effect is established.Furthermore,a practical case of HCCU is given,and the thermal effect on the radial and axial mechanical behaviors are analyzed.It is found that the thermal effect has a significant influence on the radial stiffness,and shows non-linear variation characteristics.Finally,the sensitivity analysis is carried out to study the influence of the design parameter on the stiffness of tension and torsion.The results indicated that the equivalent radial stiffness and helical angle have obvious effect on the tension-torsion coupled stiffness,which can provide reasonable reference for the design of HCCU.
文摘The present paper reports the rapid surface alloying induced by the bombardment of high-current pulsed electron beam. Two kinds of substrate materials were examined to show this effect. The first sample was a pure Al metal pre-coated with fine carbon powders prior to the bombardment, and the second alloy is the D2-Crl2MolVl mould steel pre-coated with Cr, Ti, and TiN powders. The surface elements diffuse about several micrometers into the substrate materials only after several bombardments. Tribological behaviors of these samples were characterized and significant improvement in wear resistance was found. Finally, a TEM analysis reveals the presence of stress waves generated by coupled thermal and stress fields, which was considered as the main cause of the enhanced properties.
基金financially supported by the National Natural Science Foundation of China and the Russian Foundation for Basic Research (No. 11011120081)Large Scientific Facilities of the National Natural Science Foundation of China and of the Chinese Academy of Sciences (No. 11079012)the National Natural Science Foundation of China (No. 10875021)
文摘Ti–Al surface alloy was fabricated using a cyclic pulsed liquid-phase mixing of predeposited 100 nm Al film with a-Ti substrate by low-energy high-current electron beam. Electron probe micro-analysis（EPMA）,grazing incidence X-ray diffraction analysis（GIXRD）,transmission electron microscopy（TEM）, and nanoindentation were used to investigate the characterization of Ti–Al surface alloy. The experimental results show that the thickness of alloy layer is ＊3 lm, and the content of Al in the ＊1 lm thickness surface layer is ＊60 at%. The tetragonal TiAl and TiAl2intermetallics were synthesized at the top surface, which have nanocrystalline structure.The main phase formed in the ＊2.5 lm thick surface is TiAl, and there are few TiAl2and Ti3Al phase for the alloy.Dislocation is enhanced in the alloyed layer. The nanohardness of Ti–Al surface alloy increased significantly compared with a-Ti substrate due to the nanostructure and enhanced dislocation. Since the e-beam remelted repeatedly, the Ti–Al surface alloy mixed sufficiently with Ti substrate. Moreover, there is no obvious boundary between the alloyed layer and substrate.
文摘One should pay attention to quite a lot of factors when the emittance of high-current ion beam is measured. The background subtraction and threshold setting,the measuring method of pulsed beam emittance,as well as the error sources in the emittance measurements and its elimination or correction are discussed based on the experience during the R&D of three emittance measurement units for high-current ion beams at Peking University.
基金supported by the National Natural Science Foundation of China (U1233111, 50671042)Open Foundation of Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Ministry of Education, Dalian University of Technology (DP1051102)
文摘In this paper, we present an experimental investigation of deformation twinning in polycrystalline aluminum exposed to high-current pulsed electron beam (HCPEB) irradiation. The residual tensile stress with about 10 2 MPa was introduced in the irradiated surface layer. The feature characteristic irradiated with various numbers of pulses was investigated. The formation of a large number of twin bands on the surface irradiated with multiple pulses was determined. The experimental observations indicated that the deformation twinning was indeed triggered during HCPEB irradiation. It is suggested that high value of stress and strain rate induced by rapid heating and cooling due to HCPEB irradiation may cause the shifting of whole atomic planes simultaneously. Additionally, some slipping systems may be suppressed due to the geometric confinement by thinned size of surface layer, which can promote the initiation of deformation twinning.
基金Supported by National High Technology Research and Development Program 863 (2009AA03Z206)
文摘Energy recovery linacs are promising for achieving high average current with superior beam quality.The key component for accelerating such high-current beams is the superconducting radio-frequency cavity.The design of a 1.3 GHz five-cell high-current superconducting cavity has been carried out under cooperation between Peking University and the Argonne National Laboratory.The radio-frequency properties,damping of the higher order modes,multipacting and mechanical features of this cavity have been discussed and the final design is presented.
基金supported by the National Natural Science Foundation of China(50671042)the Ph.D.Innovation Programs Foundation of Jiangsu Province(CXZZ12_0671)
文摘N-type Si(111) wafers have been processed by high-current pulsed electron beam(HCPEB) treatment with an increasing number of irradiation(1, 10 and 20pulses). The results of this work show that a highly porous nanostructure was formed after irradiation. Moreover, the high-density Si nanocrystals(Si-ncs) about 3 nm were distributed on the surface of Si wafers and exhibited3.02 e V Photoluminescence(PL) emission in blue band.The PL intensity increases with the increase in the Si-ncs' density in accordance with the quantum confinement model, which can be ascribed to the different pulse time of HCPEB treatment. The possible formation mechanisms of micropores and Si-ncs are discussed.
基金Supported by the U.S. Department of Energy,Office of Science,Office of Basic Energy Sciences,DE-AC02-06CH11357)
文摘The Advanced Photon Source （APS） at Argonne National Laboratory is considering the development of a superconducting linac-based fourth-generation hard X-ray source to meet future scientific needs of the hard X-ray user community. This work specifically focuses on the design of an optimized 5-cell superconducting radio-frequency structure well suited for a high-energy, high-beam-current energy recovery linac. The cavity design parameters are based on the APS storage ring nominal 7 GeV and 100 mA beam operation. A high-current 5-cell cw superconducting cavity operating at 1.4 GHz has been designed. In order to achieve a high current, the accelerating cavity shape has been optimized and large end-cell beam pipes have been adopted. The beam break-up threshold of the cavity has been estimated using the code TDBBU, which predicts a high threshold beam current for a 7 GeV energy recovery linac model. A copper prototype cavity has been fabricated that uses half-cell modules, initially assembled by clamping the cells together.
