To screen the high efficient mixed culture and understand the bioleaching behaviors of mixed culture for low-grade copper sulfide ore bioleaching,ten mixed cultures were collected and screened from different acid mine...To screen the high efficient mixed culture and understand the bioleaching behaviors of mixed culture for low-grade copper sulfide ore bioleaching,ten mixed cultures were collected and screened from different acid mine drainages obtained from sulfide mines of China.The leaching rate was set as criterion to screen the mixed culture and the metagenomic approach.Community genome array（CGA） was used for analyzing the mixed culture microbial community shift during the bioleaching process.The results indicate that the mixed culture obtained from Yinshan（YS） lead-zinc mine in Dexing of Jiangxi province in China reaches the maximum copper extraction（68.89%） during the one bioleaching period of 24 d.CGA results show that YS culture contains nine kinds of bacteria which are belong to six divisions,and the microbial community structure is changing during the bioleaching process.This provides a good way to accelerate the bioleaching process and reveals the microbial community shift during the bioleaching process.展开更多
Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low tim...Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low time efficiency. This paper presents two new methods with high efficiency to build a Content-based 3D model retrieval system. First, an improvement is made on the ＂Shape Distribution （D2）＂ algorithm, and a new algorithm named ＂Quick D2＂ is proposed. Four sample 3D mechanical models are used in an experiment to compare the time cost of the two algorithms. The result indicates that the time cost of Quick D2 is much lower than that of D2, while the descriptors extracted by the two algorithms are almost the same. Second, an expandable 3D model repository index method with high performance, namely, RBK index, is presented. On the basis of RBK index, the search space is pruned effectively during the search process, leading to a speed up of the whole system. The factors that influence the values of the key parameters of RBK index are discussed and an experimental method to find the optimal values of the key parameters is given. Finally, ＂3D Searcher＂, a content-based 3D model retrieval system is developed. By using the methods proposed, the time cost for the system to respond one query online is reduced by 75% on average. The system has been implemented in a manufacturing enterprise, and practical query examples during a case of the automobile rear axle design are also shown. The research method presented shows a new research perspective and can effectively improve the content-based 3D model retrieval efficiency.展开更多
The bottleneck of strontium compounds preparing from celestite is the promotion of Sr/S isolation efficiency.Low energy consumption and zero release method for isolating Sr/S in preparing Sr(OH)2 process from celestit...The bottleneck of strontium compounds preparing from celestite is the promotion of Sr/S isolation efficiency.Low energy consumption and zero release method for isolating Sr/S in preparing Sr(OH)2 process from celestite in mild condition was described.Sr element remained in precipitation with formation of Sr(OH)2,while S element entered into leachate with formation of Na2SO4.The effects of initial concentration of NaOH,conversion temperature,liquid-to-solid(L/S)ratio and conversion time on Sr/S ratio of samples for celestite conversion were systematically investigated by experiments.The results demonstrated that the efficiency of Sr/S isolation increased with the initial concentration of NaOH,L/S ratio and conversion time,and decreased with conversion temperature.The maximum conversion ratio of Sr(OH)2 was 93.88%under the optimum condition,whose Sr/S ratio of sample could reach to 41.16.It illustrated that better isolation efficiency of celestite could be achieved in alkaline treatment.The results of SEM-EDS analyses demonstrated that the conversion reaction was a dissolution-precipitation process.展开更多
On the basis of reviewing the progress in the high efficient enrichment from secondary resources of low grade precious metals at home and abroad, a process route of the high efficient enrichment precious metals from s...On the basis of reviewing the progress in the high efficient enrichment from secondary resources of low grade precious metals at home and abroad, a process route of the high efficient enrichment precious metals from secondary resources of low-grade metals by adding iron oxide as the trapping agent, reducing agent, additive, mixing uniformly and grinding, pelletizing, reduction, grinding and separation, and selectively acid leaching iron has been put forward in this paper. The experiments of reduction, grinding and separation, and selectively acid leaching iron were carried out mainly. Under the decided experiment parameters and conditions, iron generated during the reduction can trap precious metals during reduction, high active alloy powders were obtained from the reduced products by grinding and separation, the concentration of precious metals was obtained by acid leaching high active alloy powders. The better enrichment effect was obtained by adopting the technical route of processing. Other low grade noble metal materials and enrichment ratio of precious metals from the materials to acid products was high through acid leaching. This process has the advantages of simple process, environmental-friendly, strong adaptability of raw materials, high concentration ratio, which was regarded as a kind of the general efficient enrichment technology of low grade precious metal materials.展开更多
Instead of pure bacteria, induction mutation of activated sludge by ultraviolet (Uv) was studied and used to treat pulping wastewater by continuous- flow. The result showed the mutagenic activated sludge had remarkabl...Instead of pure bacteria, induction mutation of activated sludge by ultraviolet (Uv) was studied and used to treat pulping wastewater by continuous- flow. The result showed the mutagenic activated sludge had remarkable effect and application potential in pulping wastewater treatment. Comparing with common activated sludge, the mutagenic activated sludge was more suitable for lignose decomposition and had high decomposing efficiency.展开更多
A laser diode (LD) pumped Q switched high efficient intracavity frequency doubled Nd ∶YAG laser is reported here. The authors have designed an optical coupler and pointed out that the key to increasing harmonic conve...A laser diode (LD) pumped Q switched high efficient intracavity frequency doubled Nd ∶YAG laser is reported here. The authors have designed an optical coupler and pointed out that the key to increasing harmonic conversion efficiency is to decrease the loss of fundamental wave. In the experiments, a fundamental mode output laser was acquired. When the pumping power was 12 W, 2.6 W average output power at 1 064 nm with AO Q switch was obtained. 2.1 W average output power at 532 nm was obtained with intracavity frequency doubling, and the highest second harmonic conversion efficiency was 82 0 0.展开更多
The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source ...The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.展开更多
A computer generated holographic stereogram based on the wavefront recording plane （WRP） is presented. A WRP closed to the parallax image plane is introduced to record the complex amplitude in a small region for eac...A computer generated holographic stereogram based on the wavefront recording plane （WRP） is presented. A WRP closed to the parallax image plane is introduced to record the complex amplitude in a small region for each point in the parallax image. By using three times of fast Fourier transform （FFT） to execute the Fresnel dif- fraction calculation between the WRP and the holographic stereogram plane, the object wave contributing to the hologram pattern can be achieved. The computation complexity of the proposed approach is dramatically reduced. The results show that the calculation time can be decreased by more than one order of magnitude.展开更多
Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign gen...Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign genes into wheat. By using the mature embryos derived from 20 different wheat lines including Shi 4185, Yumai 66, Lunxuan 987, CB037, Yangmai 6, Xinchun 9, Bobwhite, Han 6172, Zheng 9023, Jimai 20, Ningchun 4, and Jing 411, the effects of some factors including inoculation methods, initiating culture media, organic additives, antioxidants, and auxins on the regeneration from the explants were evaluated. The results indicated that the scraping embryo culture was better than the whole embryo culture, the Aa medium was better than the SD2 medium and dicamba was better than 2,4-D in increasing the regeneration frequency. An Adi medium was established in this study by adding silver nitrate, cysteine, ascorbic acid, dicamba, glutamine into the Aa medium at the concentration of 4,40, 100, 2, and 5 mg L^-1, respectively. By using the Adi medium and the scraping technique, the regeneration frequencies of the mature embryos of CB037, Lunxuan 987, Hart 6172, Yangmai 6, Bobwhite, Zheng 9023, Shi 4 185, and Jimai 20 became 85.6, 60,1, 46.0, 42.1,42.0, 34.0, 33.0, and 32.0%, respectively, which were about 5-8 times higher than that obtained from the conventional culture mediums and techniques. This novel regeneration system could be helpful in wheat transformation.展开更多
Most of the important agronomic traits in crop plants, such as yield, quality and stress response, are quantitative and jointly controlled by many genomic loci or major genes. Improving these complex traits depends on...Most of the important agronomic traits in crop plants, such as yield, quality and stress response, are quantitative and jointly controlled by many genomic loci or major genes. Improving these complex traits depends on the combination of beneficial alleles at the quantitative trait loci （QTLs）. However, the conventional cross breeding method is extremely time-consuming and laborious for pyramiding multiple QTLs. In certain cases, this approach might be technically difficult because of close linkage between genes separately responsible for desirable and undesirable traits.展开更多
Based on reserve abundance,large gas fields in China can be divided into two types：type one of high abundance large gas fields,dominated by structural gas reservoirs; type two of low abundance large gas fields,domina...Based on reserve abundance,large gas fields in China can be divided into two types：type one of high abundance large gas fields,dominated by structural gas reservoirs; type two of low abundance large gas fields,dominated by stratigraphic and lithologic gas reservoirs.The formation of these two types of large gas fields is related to the highly efficient accumulation of natural gas.The accumulation of high abundance gas fields is dependent on the rapid maturation of the source kitchen and huge residual pressure difference between the gas source kitchen and reservoir,which is the strong driving force for natural gas migration to traps.Whereas the accumulation of low abundance gas fields is more complicated,involving both volume flow charge during the burial stage and diffusion flow charge during the uplift stage,which results in large area accumulation and preservation of natural gas in low porosity and low permeability reservoirs.This conclusion should assist gas exploration in different geological settings.展开更多
Perovskite/silicon tandem solar cells(PSTSCs) have exhibited huge technological potential for breaking the Shockley-Queisser limit of single-junction solar cells. The efficiency of P-I-N type PSTSCs has surpassed the ...Perovskite/silicon tandem solar cells(PSTSCs) have exhibited huge technological potential for breaking the Shockley-Queisser limit of single-junction solar cells. The efficiency of P-I-N type PSTSCs has surpassed the single-junction limit, while the performance of N-I-P type PSTSCs is far below the theoretical value. Here, we developed a composite electron transport layer for N-I-P type monolithic PSTSCs with enhanced open-circuit voltage(VOC) and power conversion efficiency(PCE). Lithium chloride(Li Cl) was added into the tin oxide(SnO_(2)) precursor solution, which simultaneously passivated the defects and increased the electron injection driving force at the electron transfer layer(ETL)/perovskite interface.Eventually, we achieved monolithic PSTSCs with an efficiency of 25.42% and V_(OC) of 1.92 V, which is the highest PCE and VOCin N-I-P type perovskite/Si tandem devices. This work on interface engineering for improving the PCE of monolithic PSTSCs may bring a new hot point about perovskite-based tandem devices.展开更多
A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device e...A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.展开更多
The development of deep-red emitting lead-free metal-halide perovskites with high photoluminescence quantum yields (PLQYs) and outstanding stability remains a major challenge for displays and deep-tissue bioimaging.In...The development of deep-red emitting lead-free metal-halide perovskites with high photoluminescence quantum yields (PLQYs) and outstanding stability remains a major challenge for displays and deep-tissue bioimaging.In this work,we report a facile and convenient solvothermal method to synthesize metal halides Cs_(2)Zn X_(4)(X=Cl,Br) that however is PL innert at room temperature.Upon composition engineering utilizing Sn^(2+) as the dopant,the resulting Cs_(2)Zn Cl_(4):Sn not only emits strong deep-red PL peaked at700 nm with the highest 99.4%PLQY among the similar materials so far,but also exhibits excellent structure stability in air (PLQY remains 96%after one year exposure to the atmosphere).Detailed experimental characterizations and theoretical calculations reveal that the deep-red emission stems from self-trapped excitons induced by the Sn^(2+) dopant.Particularly,triplet emission (^(3)P_(2)→^(1)S_(0)) from Sn-5s^(2) orbitals has been observed at low temperature due to the break of parity-forbidden transition.This work provides an important guidance for the development of deep-red light-emitting materials with low price,high efficiency and excellent stability.展开更多
A family of highly bulky bis(salicylaldiminate)Co(Ⅱ)complexes bearing cavity-like conformations are disclosed herein.Due to their unique bulky nature around the cobalt atoms that are reflected from space-filling mode...A family of highly bulky bis(salicylaldiminate)Co(Ⅱ)complexes bearing cavity-like conformations are disclosed herein.Due to their unique bulky nature around the cobalt atoms that are reflected from space-filling models and the buried volume percentages,obviously longer bond distances of Co―N and Co―O are revealed from those complexes.Moreover,because of these well-protected active species,the cobalt complexes are able to catalyze 1,3-butadiene polymerization in high yields at extreme low catalyst concentrations,revealing a ultra high catalytic efficiency.At a ratio of 50000,all the complexes can afford polybutadiene with yields higher than 90%.Furthermore,the highly steric bulkiness of the ligand can also significantly enhance the thermostability of the active species.At temperature of 80-120°C,the complexes are able to successfully maintain high activities,giving polymer yields up to 90%.展开更多
A novel SrSn(OH)_(6) photocatalyst with large plate and particle size were synthesized via a facile chemical precipitation method. The photocatalytic activity of the SrSn(OH)_(6) was evaluated by the removal of NO at ...A novel SrSn(OH)_(6) photocatalyst with large plate and particle size were synthesized via a facile chemical precipitation method. The photocatalytic activity of the SrSn(OH)_(6) was evaluated by the removal of NO at ppb level under UV light irradiation. Based on the ESR measurements, SrSn(OH)_(6) photocatalyst was found to have the ability to generate the main active species of O_(2)^(·-), ^(·)OH and ^(1)O_(2) during the photocatalytic process. Moreover, SrSn(OH)_(6) photocatalyst not only exhibits high photocatalytic activity for NO removal (79.6%), but also has good stability after five cycles. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was used to investigate the NO_(x) transfer pathway and the intermediate products distribution during the adsorption and photocatalytic NO oxidation process. The present work not only provides an efficient material for air pollutants purification at room temperature but also in-depth understanding of the mechanism involved in the photocatalytic NO removal process.展开更多
Since its first application to induce mutations in mammalian cells （Cong et al., 2013： Mall et al., 2013）, CRISPR/Cas9 has rapidly become a routine technique to perform genome editing in a variety of biological sys...Since its first application to induce mutations in mammalian cells （Cong et al., 2013： Mall et al., 2013）, CRISPR/Cas9 has rapidly become a routine technique to perform genome editing in a variety of biological systems due to its facile, robust, and multiplexable fea- tures （Hwang et al, 2013; Wang et al., 2013; Guo et al., 2014; Liu, 2017）.展开更多
Base editing, as an expanded clustered regularly interspaced short palindromic repeats(CRISPR)-Cas genome editing strategy, permits precise and irreversible nucleotide conversion. SaKKH, an efficient variant of a Cas9...Base editing, as an expanded clustered regularly interspaced short palindromic repeats(CRISPR)-Cas genome editing strategy, permits precise and irreversible nucleotide conversion. SaKKH, an efficient variant of a Cas9 ortholog from Staphylococcus aureus(SaCas9), is important in genome editing because it can edit sites with HHHAAT protospacer adjacent motif(PAM) that the canonical Streptococcus pyogenes Cas9(SpCas9) or its variants(e.g. xCas9, Cas9-NG) cannot. However, several technical parameters of SaKKH involved base editors have not been well defined and this uncertainty limits their application. We developed an effective multiplex cytosine base editor(SaKKHn-pBE) and showed that it recognized NNARRT, NNCRRT, NNGRGT, and NNTRGT PAMs. Based on 27 targets tested, we defined technical parameters of SaKKHn-pBE including the editing window, the preferred sequence context, and the mutation type. The editing efficiency was further improved by modification of the SaKKH sgRNA. These advances can be applied in future research and molecular breeding in rice and other plants.展开更多
A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at ...A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at random and single molecular state in the ultrasonic field and the ultrasonic wave favors the diffusion and adsorption processes of dye molecules. As a result, the introduction of ultrasonic technique at room temperature leads to faster and more well-distributed dye adsorption on TiO2 as well as higher cell efficiency than regular deposition, thus the fabrication time is markedly reduced. It is found that the device based on 40 kHz ultrasonic （within 1 h） with N719 exhibits a Voc of 789 mV, Jsc of 14.94 mA]cm2 and fill factor （FF） of 69.3, yielding power conversion efficiency （PCE） of 8.16%, which is higher than device regularly dyed for 12 h （PCE = 8.06%）. In addition, the DSSC devices obtain the best efficiency （PCE = 8.68%） when the ultrasonic deposition time increases to 2.5 h. The DSSCs fabricated via ultrasonic technique presents more dye loading, larger photocurrent, less charge recombination and higher photovoltage. The charge extraction and electron impedance spectroscopy （EIS） were performed to understand the influence of ultrasonic technique on the electron recombination and performance of DSSCs.展开更多
A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion e...A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.展开更多
基金Project(50774102)supported by the National Natural Science Foundation of ChinaProject(2004CB619204)supported by the National Basic Research Program of China
文摘To screen the high efficient mixed culture and understand the bioleaching behaviors of mixed culture for low-grade copper sulfide ore bioleaching,ten mixed cultures were collected and screened from different acid mine drainages obtained from sulfide mines of China.The leaching rate was set as criterion to screen the mixed culture and the metagenomic approach.Community genome array（CGA） was used for analyzing the mixed culture microbial community shift during the bioleaching process.The results indicate that the mixed culture obtained from Yinshan（YS） lead-zinc mine in Dexing of Jiangxi province in China reaches the maximum copper extraction（68.89%） during the one bioleaching period of 24 d.CGA results show that YS culture contains nine kinds of bacteria which are belong to six divisions,and the microbial community structure is changing during the bioleaching process.This provides a good way to accelerate the bioleaching process and reveals the microbial community shift during the bioleaching process.
基金supported by National Natural Science Foundation of China(Grant No. 51175287)National Science and Technology Major Project(Grant No. 2011ZX02403)
文摘Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low time efficiency. This paper presents two new methods with high efficiency to build a Content-based 3D model retrieval system. First, an improvement is made on the ＂Shape Distribution （D2）＂ algorithm, and a new algorithm named ＂Quick D2＂ is proposed. Four sample 3D mechanical models are used in an experiment to compare the time cost of the two algorithms. The result indicates that the time cost of Quick D2 is much lower than that of D2, while the descriptors extracted by the two algorithms are almost the same. Second, an expandable 3D model repository index method with high performance, namely, RBK index, is presented. On the basis of RBK index, the search space is pruned effectively during the search process, leading to a speed up of the whole system. The factors that influence the values of the key parameters of RBK index are discussed and an experimental method to find the optimal values of the key parameters is given. Finally, ＂3D Searcher＂, a content-based 3D model retrieval system is developed. By using the methods proposed, the time cost for the system to respond one query online is reduced by 75% on average. The system has been implemented in a manufacturing enterprise, and practical query examples during a case of the automobile rear axle design are also shown. The research method presented shows a new research perspective and can effectively improve the content-based 3D model retrieval efficiency.
基金Project(2015-GX-108A)supported by Qinghai Provincial Science and Technology Support Program,China
文摘The bottleneck of strontium compounds preparing from celestite is the promotion of Sr/S isolation efficiency.Low energy consumption and zero release method for isolating Sr/S in preparing Sr(OH)2 process from celestite in mild condition was described.Sr element remained in precipitation with formation of Sr(OH)2,while S element entered into leachate with formation of Na2SO4.The effects of initial concentration of NaOH,conversion temperature,liquid-to-solid(L/S)ratio and conversion time on Sr/S ratio of samples for celestite conversion were systematically investigated by experiments.The results demonstrated that the efficiency of Sr/S isolation increased with the initial concentration of NaOH,L/S ratio and conversion time,and decreased with conversion temperature.The maximum conversion ratio of Sr(OH)2 was 93.88%under the optimum condition,whose Sr/S ratio of sample could reach to 41.16.It illustrated that better isolation efficiency of celestite could be achieved in alkaline treatment.The results of SEM-EDS analyses demonstrated that the conversion reaction was a dissolution-precipitation process.
基金The National Basic Research Program( 973 Plan) of China(2012CB724201)
文摘On the basis of reviewing the progress in the high efficient enrichment from secondary resources of low grade precious metals at home and abroad, a process route of the high efficient enrichment precious metals from secondary resources of low-grade metals by adding iron oxide as the trapping agent, reducing agent, additive, mixing uniformly and grinding, pelletizing, reduction, grinding and separation, and selectively acid leaching iron has been put forward in this paper. The experiments of reduction, grinding and separation, and selectively acid leaching iron were carried out mainly. Under the decided experiment parameters and conditions, iron generated during the reduction can trap precious metals during reduction, high active alloy powders were obtained from the reduced products by grinding and separation, the concentration of precious metals was obtained by acid leaching high active alloy powders. The better enrichment effect was obtained by adopting the technical route of processing. Other low grade noble metal materials and enrichment ratio of precious metals from the materials to acid products was high through acid leaching. This process has the advantages of simple process, environmental-friendly, strong adaptability of raw materials, high concentration ratio, which was regarded as a kind of the general efficient enrichment technology of low grade precious metal materials.
文摘Instead of pure bacteria, induction mutation of activated sludge by ultraviolet (Uv) was studied and used to treat pulping wastewater by continuous- flow. The result showed the mutagenic activated sludge had remarkable effect and application potential in pulping wastewater treatment. Comparing with common activated sludge, the mutagenic activated sludge was more suitable for lignose decomposition and had high decomposing efficiency.
文摘A laser diode (LD) pumped Q switched high efficient intracavity frequency doubled Nd ∶YAG laser is reported here. The authors have designed an optical coupler and pointed out that the key to increasing harmonic conversion efficiency is to decrease the loss of fundamental wave. In the experiments, a fundamental mode output laser was acquired. When the pumping power was 12 W, 2.6 W average output power at 1 064 nm with AO Q switch was obtained. 2.1 W average output power at 532 nm was obtained with intracavity frequency doubling, and the highest second harmonic conversion efficiency was 82 0 0.
基金Supported by the PetroChina Science and Technology Project(2021DJ1808).
文摘The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.
基金supported by the National Natural Science Foundation of China(No.61401288)the Guangdong Province Higher Vocational Colleges&Schools Pearl River Scholar Funded Scheme(2016)+1 种基金Integration of Cloud Computing and Big Data,Innovation of Science and Education(No.2017A15009)the Engineering Applications of Artificial Intelligence Technology Laboratory(No.PT201701)
文摘A computer generated holographic stereogram based on the wavefront recording plane （WRP） is presented. A WRP closed to the parallax image plane is introduced to record the complex amplitude in a small region for each point in the parallax image. By using three times of fast Fourier transform （FFT） to execute the Fresnel dif- fraction calculation between the WRP and the holographic stereogram plane, the object wave contributing to the hologram pattern can be achieved. The computation complexity of the proposed approach is dramatically reduced. The results show that the calculation time can be decreased by more than one order of magnitude.
基金funded by the National Natural Science Foundation of China (30971776)the National Transgenic Organism Research Program of China(2008ZX08010-004)
文摘Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign genes into wheat. By using the mature embryos derived from 20 different wheat lines including Shi 4185, Yumai 66, Lunxuan 987, CB037, Yangmai 6, Xinchun 9, Bobwhite, Han 6172, Zheng 9023, Jimai 20, Ningchun 4, and Jing 411, the effects of some factors including inoculation methods, initiating culture media, organic additives, antioxidants, and auxins on the regeneration from the explants were evaluated. The results indicated that the scraping embryo culture was better than the whole embryo culture, the Aa medium was better than the SD2 medium and dicamba was better than 2,4-D in increasing the regeneration frequency. An Adi medium was established in this study by adding silver nitrate, cysteine, ascorbic acid, dicamba, glutamine into the Aa medium at the concentration of 4,40, 100, 2, and 5 mg L^-1, respectively. By using the Adi medium and the scraping technique, the regeneration frequencies of the mature embryos of CB037, Lunxuan 987, Hart 6172, Yangmai 6, Bobwhite, Zheng 9023, Shi 4 185, and Jimai 20 became 85.6, 60,1, 46.0, 42.1,42.0, 34.0, 33.0, and 32.0%, respectively, which were about 5-8 times higher than that obtained from the conventional culture mediums and techniques. This novel regeneration system could be helpful in wheat transformation.
基金supported by Genetically Modified Breeding Major Projects(No.2016ZX08010-002-008)the National Natural Science Foundation of China(Nos.31501239 and 31401454)
文摘Most of the important agronomic traits in crop plants, such as yield, quality and stress response, are quantitative and jointly controlled by many genomic loci or major genes. Improving these complex traits depends on the combination of beneficial alleles at the quantitative trait loci （QTLs）. However, the conventional cross breeding method is extremely time-consuming and laborious for pyramiding multiple QTLs. In certain cases, this approach might be technically difficult because of close linkage between genes separately responsible for desirable and undesirable traits.
基金sponsored by the National Key Basic Research Program of China(2007CB2095)
文摘Based on reserve abundance,large gas fields in China can be divided into two types：type one of high abundance large gas fields,dominated by structural gas reservoirs; type two of low abundance large gas fields,dominated by stratigraphic and lithologic gas reservoirs.The formation of these two types of large gas fields is related to the highly efficient accumulation of natural gas.The accumulation of high abundance gas fields is dependent on the rapid maturation of the source kitchen and huge residual pressure difference between the gas source kitchen and reservoir,which is the strong driving force for natural gas migration to traps.Whereas the accumulation of low abundance gas fields is more complicated,involving both volume flow charge during the burial stage and diffusion flow charge during the uplift stage,which results in large area accumulation and preservation of natural gas in low porosity and low permeability reservoirs.This conclusion should assist gas exploration in different geological settings.
基金supported by the National Key Research and Development Program of China (Grant No.2018YFB1500103)the National Natural Science Foundation of China (Grant No.61674084)+4 种基金the Overseas Expertise Introduction Project for Discipline Innovation of Higher Education of China (Grant No.B16027)the Tianjin Science and Technology Project (Grant No.18ZXJMTG00220)the Fundamental Research Funds for the Central Universities of Nankai University (Grant Nos.63191736,ZB19500204)the Natural Science Foundation of Tianjin (Grant No.20JCQNJC02070)the China Postdoctoral Science Foundation (Grant No.2020T130317)。
文摘Perovskite/silicon tandem solar cells(PSTSCs) have exhibited huge technological potential for breaking the Shockley-Queisser limit of single-junction solar cells. The efficiency of P-I-N type PSTSCs has surpassed the single-junction limit, while the performance of N-I-P type PSTSCs is far below the theoretical value. Here, we developed a composite electron transport layer for N-I-P type monolithic PSTSCs with enhanced open-circuit voltage(VOC) and power conversion efficiency(PCE). Lithium chloride(Li Cl) was added into the tin oxide(SnO_(2)) precursor solution, which simultaneously passivated the defects and increased the electron injection driving force at the electron transfer layer(ETL)/perovskite interface.Eventually, we achieved monolithic PSTSCs with an efficiency of 25.42% and V_(OC) of 1.92 V, which is the highest PCE and VOCin N-I-P type perovskite/Si tandem devices. This work on interface engineering for improving the PCE of monolithic PSTSCs may bring a new hot point about perovskite-based tandem devices.
文摘A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.
基金the financial supports from National Natural Science Foundation of China (Nos. 91741105, 22109130)Chongqing Municipal Natural Science Foundation (Nos. cstc2018jcyj AX0625, cstc2021jcyj-msxm X1180)Program for Innovation Team Building at Institutions of Higher Education in Chongqing (No. CXTDX201601011)。
文摘The development of deep-red emitting lead-free metal-halide perovskites with high photoluminescence quantum yields (PLQYs) and outstanding stability remains a major challenge for displays and deep-tissue bioimaging.In this work,we report a facile and convenient solvothermal method to synthesize metal halides Cs_(2)Zn X_(4)(X=Cl,Br) that however is PL innert at room temperature.Upon composition engineering utilizing Sn^(2+) as the dopant,the resulting Cs_(2)Zn Cl_(4):Sn not only emits strong deep-red PL peaked at700 nm with the highest 99.4%PLQY among the similar materials so far,but also exhibits excellent structure stability in air (PLQY remains 96%after one year exposure to the atmosphere).Detailed experimental characterizations and theoretical calculations reveal that the deep-red emission stems from self-trapped excitons induced by the Sn^(2+) dopant.Particularly,triplet emission (^(3)P_(2)→^(1)S_(0)) from Sn-5s^(2) orbitals has been observed at low temperature due to the break of parity-forbidden transition.This work provides an important guidance for the development of deep-red light-emitting materials with low price,high efficiency and excellent stability.
基金financially supported by the National Natural Science Foundation of China(Nos.U1862206 and 21801236)。
文摘A family of highly bulky bis(salicylaldiminate)Co(Ⅱ)complexes bearing cavity-like conformations are disclosed herein.Due to their unique bulky nature around the cobalt atoms that are reflected from space-filling models and the buried volume percentages,obviously longer bond distances of Co―N and Co―O are revealed from those complexes.Moreover,because of these well-protected active species,the cobalt complexes are able to catalyze 1,3-butadiene polymerization in high yields at extreme low catalyst concentrations,revealing a ultra high catalytic efficiency.At a ratio of 50000,all the complexes can afford polybutadiene with yields higher than 90%.Furthermore,the highly steric bulkiness of the ligand can also significantly enhance the thermostability of the active species.At temperature of 80-120°C,the complexes are able to successfully maintain high activities,giving polymer yields up to 90%.
基金financially supported by the National Natural Science Foundation of China (No. 51708078)the Science and Technology Research Program of Chongqing Municipal Education Commission (No. KJZD-K201900502)+1 种基金the Natural Science Foundation of Chongqing (No. 2018jcyj A1040)the Innovative Research Team of Chongqing (No. CQYC201903221)。
文摘A novel SrSn(OH)_(6) photocatalyst with large plate and particle size were synthesized via a facile chemical precipitation method. The photocatalytic activity of the SrSn(OH)_(6) was evaluated by the removal of NO at ppb level under UV light irradiation. Based on the ESR measurements, SrSn(OH)_(6) photocatalyst was found to have the ability to generate the main active species of O_(2)^(·-), ^(·)OH and ^(1)O_(2) during the photocatalytic process. Moreover, SrSn(OH)_(6) photocatalyst not only exhibits high photocatalytic activity for NO removal (79.6%), but also has good stability after five cycles. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was used to investigate the NO_(x) transfer pathway and the intermediate products distribution during the adsorption and photocatalytic NO oxidation process. The present work not only provides an efficient material for air pollutants purification at room temperature but also in-depth understanding of the mechanism involved in the photocatalytic NO removal process.
基金supported by the grants from the National Natural Science Foundation of China (No.31101038 to M.Shao,31471360 and 31671509 to D.-L.Shi)Shandong Provincial Natural Science Foundation (ZR2017BC068 to M.Shao)
文摘Since its first application to induce mutations in mammalian cells （Cong et al., 2013： Mall et al., 2013）, CRISPR/Cas9 has rapidly become a routine technique to perform genome editing in a variety of biological systems due to its facile, robust, and multiplexable fea- tures （Hwang et al, 2013; Wang et al., 2013; Guo et al., 2014; Liu, 2017）.
基金supported by the Beijing Scholars Program[BSP041]。
文摘Base editing, as an expanded clustered regularly interspaced short palindromic repeats(CRISPR)-Cas genome editing strategy, permits precise and irreversible nucleotide conversion. SaKKH, an efficient variant of a Cas9 ortholog from Staphylococcus aureus(SaCas9), is important in genome editing because it can edit sites with HHHAAT protospacer adjacent motif(PAM) that the canonical Streptococcus pyogenes Cas9(SpCas9) or its variants(e.g. xCas9, Cas9-NG) cannot. However, several technical parameters of SaKKH involved base editors have not been well defined and this uncertainty limits their application. We developed an effective multiplex cytosine base editor(SaKKHn-pBE) and showed that it recognized NNARRT, NNCRRT, NNGRGT, and NNTRGT PAMs. Based on 27 targets tested, we defined technical parameters of SaKKHn-pBE including the editing window, the preferred sequence context, and the mutation type. The editing efficiency was further improved by modification of the SaKKH sgRNA. These advances can be applied in future research and molecular breeding in rice and other plants.
基金supported by the Science Fund for Creative Research Groups(21421004)the National Basic Research 973 Program(2013CB733700)NSFC/China(21172073,21372082,21572062 and 91233207)
文摘A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at random and single molecular state in the ultrasonic field and the ultrasonic wave favors the diffusion and adsorption processes of dye molecules. As a result, the introduction of ultrasonic technique at room temperature leads to faster and more well-distributed dye adsorption on TiO2 as well as higher cell efficiency than regular deposition, thus the fabrication time is markedly reduced. It is found that the device based on 40 kHz ultrasonic （within 1 h） with N719 exhibits a Voc of 789 mV, Jsc of 14.94 mA]cm2 and fill factor （FF） of 69.3, yielding power conversion efficiency （PCE） of 8.16%, which is higher than device regularly dyed for 12 h （PCE = 8.06%）. In addition, the DSSC devices obtain the best efficiency （PCE = 8.68%） when the ultrasonic deposition time increases to 2.5 h. The DSSCs fabricated via ultrasonic technique presents more dye loading, larger photocurrent, less charge recombination and higher photovoltage. The charge extraction and electron impedance spectroscopy （EIS） were performed to understand the influence of ultrasonic technique on the electron recombination and performance of DSSCs.
基金Supported by the National Natural Science Foundation of China under Grant No 11335003
文摘A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.
