Empirical functional models for the maximum and minimum detectable deformation gradient of PALSAR interferometry were established based on coherence and discrete look numbers. Then, a least square regression method wa...Empirical functional models for the maximum and minimum detectable deformation gradient of PALSAR interferometry were established based on coherence and discrete look numbers. Then, a least square regression method was used to fit the model coefficients and thus obtain the generalized functional models for both coherence and look numbers. The experimental results with ALOS PALSAR data of Wenchuan earthquake of China show that the new model works well for judging whether the deformation gradient can be detected by the D-InSAR technology or not. The results can help researchers to choose PALSAR data and to configure processing parameters, and also benefit the interpretation of the measured surface deformation.展开更多
针对铝合金冷金属过渡焊接技术(cold metal transfer,CMT)分析了熔滴过渡过程,以Mast语言构建了相关模型,并测定瞬时送丝速度,给出了CMT过渡周期中送丝速度变化曲线,结合弧焊电源的电路结构,构建了基于Saber的CMT焊机主电路和控制电路...针对铝合金冷金属过渡焊接技术(cold metal transfer,CMT)分析了熔滴过渡过程,以Mast语言构建了相关模型,并测定瞬时送丝速度,给出了CMT过渡周期中送丝速度变化曲线,结合弧焊电源的电路结构,构建了基于Saber的CMT焊机主电路和控制电路仿真平台.通过该平台进行改变峰值持续时间的非一元化焊接仿真,并同实测的电流和电压信号进行对比,探讨了焊接电流、电弧电压、过渡频率、熔滴体积和送丝速度等参数误差.结果表明,仿真与实测值误差较小,均在10%以下,证实了搭建CMT仿真平台的准确性,进而为理解CMT物理过程,优化工艺参数奠定了初步的基础.展开更多
The Auto-Transformer Rectifier Unit（ATRU） is one preferred solution for high-power AC/DC power conversion in aircraft. This is mainly due to its simple structure, high reliability and reduced k VA ratings. Indeed, t...The Auto-Transformer Rectifier Unit（ATRU） is one preferred solution for high-power AC/DC power conversion in aircraft. This is mainly due to its simple structure, high reliability and reduced k VA ratings. Indeed, the ATRU has become a preferred AC/DC solution to supply power to the electric environment control system on-board future aircraft. In this paper, a general modelling method for ATRUs is introduced. The developed model is based on the fact that the DC voltage and current are strongly related to the voltage and current vectors at the AC terminals of ATRUs. In this paper, we carry on our research in modelling symmetric 18-pulse ATRUs and develop a generic modelling technique. The developed generic model can study not only symmetric but also asymmetric ATRUs. An 18-pulse asymmetric ATRU is used to demonstrate the accuracy and efficiency of the developed model by comparing with corresponding detailed switching SABER models provided by our industrial partner. The functional models also allow accelerated and accurate simulations and thus enable whole-scale more-electric aircraft electrical power system studies in the future.展开更多
The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings ar...The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.展开更多
Development of the orbital-free (OF) approach of the density functional theory (DFT) may result in a power instrument for modeling of complicated nanosystems with a huge number of atoms. A key problem on this way is c...Development of the orbital-free (OF) approach of the density functional theory (DFT) may result in a power instrument for modeling of complicated nanosystems with a huge number of atoms. A key problem on this way is calculation of the kinetic energy. We demonstrate how it is possible to create the OF kinetic energy functionals using results of Kohn-Sham calculations for single atoms. Calculations provided with these functionals for dimers of sp-elements of the C, Si, and Ge periodic table rows show a good accordance with the Kohn-Sham DFT results.展开更多
本研究在WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research TestBed)临近空间资料同化预报系统中加入SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb So...本研究在WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research TestBed)临近空间资料同化预报系统中加入SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb Sounder)臭氧观测同化接口,并以2016年2月一次平流层爆发性增温(SSW)过程为模拟个例进行了SABER和MLS臭氧观测同化试验,得出以下结论:同化SABER和MLS臭氧体积浓度观测得出的WACCM+DART臭氧分析场能够较真实反映SSW期间北极上空平流层臭氧廓线随时间的演变特征,且与ERA5(Fifth Generation of ECMWF Reanalyses)再分析资料描述的臭氧变化特征具有很好的一致性;基于SABER和MLS臭氧观测的WACCM臭氧6 h预报检验表明同化臭氧观测对臭氧分析和预报误差的改善效果主要体现在南半球高纬平流层和北半球中高纬平流层中上层—中间层底部;基于ERA5再分析资料的WACCM+DART分析场检验表明同化SABER和MLS臭氧体积浓度资料可在提高北半球高纬地区上平流层—中间层底部臭氧场分析质量的同时减小该地区上平流层—中间层底部温度场和中间层底部纬向风场的分析误差;基于MLS臭氧资料的臭氧中期预报检验表明相对控制试验同化SABER和MLS臭氧体积浓度资料能更好改善0~5 d下平流层和中间层底部臭氧的预报效果。展开更多
基于WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research Test-Bed)临近空间资料同化预报系统,以2016年2月的一次平流层爆发性增温(SSW)事件为例,开展了临近空间SABER(Sounding of the Atmosphere using ...基于WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research Test-Bed)临近空间资料同化预报系统,以2016年2月的一次平流层爆发性增温(SSW)事件为例,开展了临近空间SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb Sounder)温度观测资料集合滤波同化试验.结果表明:同化SABER和MLS温度观测资料可显著降低WACCM模式在中间层和平流层中上部(0.001~10 hPa)大气温度场的预报误差,改善CR试验在SSW发生时中间层变冷现象偏强、纬向风场首次发生反转的层次偏低以及增温恢复阶段0.1~10 hPa的东风层提前消退、纬向风速偏大、平流层顶位置偏高等现象.基于ERA5(The Fifth Generation of ECMWF Reanalyses)再分析资料的检验表明:同化SABER和MLS温度资料明显有利于减小北半球高纬度地区(60°-90°N)平流层中上层和下中间层(0.1~14 hPa)纬向风场以及平流层和中间层中下层(0.01~100 hPa)温度场的分析误差;同化低层大气观测也有利于减小0.1~14hPa纬向风场和0.01~100 hPa温度场的分析误差,但是不如同化SABER和MLS温度资料对临近空间纬向风场和温度场分析误差的改善效果显著.展开更多
基金Projects(41222227,U1231105)supported by the National Natural Science Foundation of ChinaProject(13JJ1006)supported by the Natural Science Foundation of Hunan Province,China
文摘Empirical functional models for the maximum and minimum detectable deformation gradient of PALSAR interferometry were established based on coherence and discrete look numbers. Then, a least square regression method was used to fit the model coefficients and thus obtain the generalized functional models for both coherence and look numbers. The experimental results with ALOS PALSAR data of Wenchuan earthquake of China show that the new model works well for judging whether the deformation gradient can be detected by the D-InSAR technology or not. The results can help researchers to choose PALSAR data and to configure processing parameters, and also benefit the interpretation of the measured surface deformation.
文摘针对铝合金冷金属过渡焊接技术(cold metal transfer,CMT)分析了熔滴过渡过程,以Mast语言构建了相关模型,并测定瞬时送丝速度,给出了CMT过渡周期中送丝速度变化曲线,结合弧焊电源的电路结构,构建了基于Saber的CMT焊机主电路和控制电路仿真平台.通过该平台进行改变峰值持续时间的非一元化焊接仿真,并同实测的电流和电压信号进行对比,探讨了焊接电流、电弧电压、过渡频率、熔滴体积和送丝速度等参数误差.结果表明,仿真与实测值误差较小,均在10%以下,证实了搭建CMT仿真平台的准确性,进而为理解CMT物理过程,优化工艺参数奠定了初步的基础.
文摘The Auto-Transformer Rectifier Unit（ATRU） is one preferred solution for high-power AC/DC power conversion in aircraft. This is mainly due to its simple structure, high reliability and reduced k VA ratings. Indeed, the ATRU has become a preferred AC/DC solution to supply power to the electric environment control system on-board future aircraft. In this paper, a general modelling method for ATRUs is introduced. The developed model is based on the fact that the DC voltage and current are strongly related to the voltage and current vectors at the AC terminals of ATRUs. In this paper, we carry on our research in modelling symmetric 18-pulse ATRUs and develop a generic modelling technique. The developed generic model can study not only symmetric but also asymmetric ATRUs. An 18-pulse asymmetric ATRU is used to demonstrate the accuracy and efficiency of the developed model by comparing with corresponding detailed switching SABER models provided by our industrial partner. The functional models also allow accelerated and accurate simulations and thus enable whole-scale more-electric aircraft electrical power system studies in the future.
基金co-supported by the National Natural Science Foundation for Outstanding Young Scholar of China (No. 51622704)Jiangsu Provincial Science Funds for Distinguished Young Scientists of China (No. BK20150033)Postgraduate Research & Practice Innovation Program of Jiangsu Province (No. KYLX16_0358)
文摘The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.
文摘Development of the orbital-free (OF) approach of the density functional theory (DFT) may result in a power instrument for modeling of complicated nanosystems with a huge number of atoms. A key problem on this way is calculation of the kinetic energy. We demonstrate how it is possible to create the OF kinetic energy functionals using results of Kohn-Sham calculations for single atoms. Calculations provided with these functionals for dimers of sp-elements of the C, Si, and Ge periodic table rows show a good accordance with the Kohn-Sham DFT results.
文摘本研究在WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research TestBed)临近空间资料同化预报系统中加入SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb Sounder)臭氧观测同化接口,并以2016年2月一次平流层爆发性增温(SSW)过程为模拟个例进行了SABER和MLS臭氧观测同化试验,得出以下结论:同化SABER和MLS臭氧体积浓度观测得出的WACCM+DART臭氧分析场能够较真实反映SSW期间北极上空平流层臭氧廓线随时间的演变特征,且与ERA5(Fifth Generation of ECMWF Reanalyses)再分析资料描述的臭氧变化特征具有很好的一致性;基于SABER和MLS臭氧观测的WACCM臭氧6 h预报检验表明同化臭氧观测对臭氧分析和预报误差的改善效果主要体现在南半球高纬平流层和北半球中高纬平流层中上层—中间层底部;基于ERA5再分析资料的WACCM+DART分析场检验表明同化SABER和MLS臭氧体积浓度资料可在提高北半球高纬地区上平流层—中间层底部臭氧场分析质量的同时减小该地区上平流层—中间层底部温度场和中间层底部纬向风场的分析误差;基于MLS臭氧资料的臭氧中期预报检验表明相对控制试验同化SABER和MLS臭氧体积浓度资料能更好改善0~5 d下平流层和中间层底部臭氧的预报效果。
文摘基于WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research Test-Bed)临近空间资料同化预报系统,以2016年2月的一次平流层爆发性增温(SSW)事件为例,开展了临近空间SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb Sounder)温度观测资料集合滤波同化试验.结果表明:同化SABER和MLS温度观测资料可显著降低WACCM模式在中间层和平流层中上部(0.001~10 hPa)大气温度场的预报误差,改善CR试验在SSW发生时中间层变冷现象偏强、纬向风场首次发生反转的层次偏低以及增温恢复阶段0.1~10 hPa的东风层提前消退、纬向风速偏大、平流层顶位置偏高等现象.基于ERA5(The Fifth Generation of ECMWF Reanalyses)再分析资料的检验表明:同化SABER和MLS温度资料明显有利于减小北半球高纬度地区(60°-90°N)平流层中上层和下中间层(0.1~14 hPa)纬向风场以及平流层和中间层中下层(0.01~100 hPa)温度场的分析误差;同化低层大气观测也有利于减小0.1~14hPa纬向风场和0.01~100 hPa温度场的分析误差,但是不如同化SABER和MLS温度资料对临近空间纬向风场和温度场分析误差的改善效果显著.
