Adopting the quasi-three-dimensional （Quasi-3D） numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae bet...Adopting the quasi-three-dimensional （Quasi-3D） numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe con-veyance distance （SCD） of a water pipeline and six influencing factors are established based on the lowest water temper-ature （LWT） along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration （MFP） instead of the mean annual ground surface temperature （MAGST） and soil water content （SWC） to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is estab-lished based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters： the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.展开更多
The fluoride volatility method (FVM) is a technique tailored to separate uranium from fuel salt of molten salt reactors. A key challenge in R&D of the FVM is corrosion due to the presence of molten salt and corros...The fluoride volatility method (FVM) is a technique tailored to separate uranium from fuel salt of molten salt reactors. A key challenge in R&D of the FVM is corrosion due to the presence of molten salt and corrosive gases at high temperature. In this work, a frozen-wall technique was proposed to produce a physical barrier between construction materials and corrosive reactants. The protective performance of the frozen wall against molten salt was assessed using FLiNaK molten salt with introduced fluorine gas, which was regarded as a simulation of the FVM process. SS304, SS316L, Inconel 600 and graphite were chosen as the test samples. The extent of corrosion was characterized by an analysis of weight loss and scanning electron microscope studies. All four test samples suffered severe corrosion in the molten salt phase with the corrosion resistance as: Inconel 600>SS316L>graphite>SS304. The presence of the frozen wall could protect materials against corrosion by molten salt and corrosive gases, and compared with materials exposed to molten salt, the corrosion rates of materials protected by the frozen wall were decreased by at least one order of magnitude.展开更多
Lateral spread of frozen ground crust over liquefied soil has caused extensive bridge foundation damage in the past winter earthquakes.A shake table experiment was conducted to investigate the performance of a model p...Lateral spread of frozen ground crust over liquefied soil has caused extensive bridge foundation damage in the past winter earthquakes.A shake table experiment was conducted to investigate the performance of a model pile in this scenario and revealed unique pile failure mechanisms.The modelling results provided valuable data for validating numerical models.This paper presents analyses and results of this experiment using two numerical modeling approaches： solid-fluid coupled finite element（FE） modeling and the beam-on-nonlinear-Winkler-foundation（BNWF） method.A FE model was constructed based on the experiment configuration and subjected to earthquake loading.Soil and pile response results were presented and compared with experimental results to validate this model.The BNWF method was used to predict the pile response and failure mechanism.A p-y curve was presented for modelling the frozen ground crust with the free-field displacement from the experiment as loading.Pile responses were presented and compared with those of the experiment and FE model.It was concluded that the coupled FE model was effective in predicting formation of three plastic hinges at ground surface,ground crust-liquefiable soil interface and within the medium dense sand layer,while the BNWF method was only able to predict the latter two.展开更多
The average temperature of frozen soil wall is an essential parameter in the process of design, construction, and safety manage- ment of artificial ground freezing engineering. It is the basis of calculating frozen s...The average temperature of frozen soil wall is an essential parameter in the process of design, construction, and safety manage- ment of artificial ground freezing engineering. It is the basis of calculating frozen soil＇s mechanical parameters, fiarther prediction of bearing capacity and, ultimately, safety evaluation of the frozen soil wall. Regarding the average temperature of sin- gle-row-piped frozen soil wall, this paper summarizes several current calculation methods and their shortcomings. Furthermore, on the basis of Bakholdin＇s analytical solution for the temperature field under straight single-row-piped freezing, two new calcula- tion models, namely, the equivalent trapezoid model and the equivalent triangle model, are proposed. These two approaches are used to calculate the average temperature of a certain cross section which indicates the condition of the whole frozen soil wall. Considering the possible parameter range according to the freezing pipe layout that might be applied in actual construction, this paper compares the average temperatures of frozen soil walls obtained by the equivalent trapezoid method and the equivalent tri- angle method with that obtained by numerical integration of Bakholdin＇s analytical solution. The results show that the discrepancies are extremely small and these two new approaches are better than currently prevailing methods. However, the equivalent triangle method boasts higher accuracy and a simpler formula compared with the equivalent trapezoid method.展开更多
This paper presents an implementation and posterior analysis of the convergence of the panel method. The implemented panel method is based on vortex lines and an unsteady wake on a flat plate as a wing. The main goal ...This paper presents an implementation and posterior analysis of the convergence of the panel method. The implemented panel method is based on vortex lines and an unsteady wake on a flat plate as a wing. The main goal of the study was to discover parameters and their values range to obtain convergence of the solution. Results of lift convergence in function of control panel’s position, the effect of the size of the wake panels, the dimension of the wake, and the computation time are quantitatively described. The lift results are similar to the predictions by the lifting-line theory and the wake exhibited an expected shape, showing wingtip, and start vortices. Geometric parameters and non-dimensional values were developed to increase accuracy and stability of the method.展开更多
Sun synchronous orbit and frozen orbit formed due to J 2 perturbation have very strict constraints on orbital parameters,which have restricted the application a lot.In this paper,several control strategies were illust...Sun synchronous orbit and frozen orbit formed due to J 2 perturbation have very strict constraints on orbital parameters,which have restricted the application a lot.In this paper,several control strategies were illustrated to realize Sun synchronous frozen orbit with arbitrary orbital elements using continuous low-thrust.Firstly,according to mean element method,the averaged rate of change of the orbital elements,originating from disturbing constant accelerations over one orbital period,was derived from Gauss＇ variation of parameters equations.Then,we proposed that binormal acceleration could be used to realize Sun synchronous orbit,and radial or transverse acceleration could be adopted to eliminate the rotation of the argument of the perigee.Finally,amending methods on the control strategies mentioned above were presented to eliminate the residual secular growth.Simulation results showed that the control strategies illustrated in this paper could realize Sun synchronous frozen orbit with arbitrary orbital elements,and can save much more energy than the schemes presented in previous studies,and have no side effect on other orbital parameters＇ secular motion.展开更多
冷冻熟面因口感好、方便等特点,发展潜力巨大。预冷是影响其品质的关键因素,为探究冷冻熟面在不同预冷方式处理的过程中品质特性的变化,选取了3种预冷方式:冰箱预冷(refrigerator pre-cooling,RPC)、冷水预冷(cold water pre-cooling,CW...冷冻熟面因口感好、方便等特点,发展潜力巨大。预冷是影响其品质的关键因素,为探究冷冻熟面在不同预冷方式处理的过程中品质特性的变化,选取了3种预冷方式:冰箱预冷(refrigerator pre-cooling,RPC)、冷水预冷(cold water pre-cooling,CWPC)、真空预冷(vacuum pre-cooling,VPC),4种预冷终温:20、15、10、5℃,对面条进行预冷。利用质构仪、傅里叶红外光谱仪、低场核磁等手段,探究不同预冷方式对冷冻熟面水分含量、质构特性、微观结构、蛋白质二级结构、水分分布等特性的影响规律。结果表明:RPC处理后的面条自由水含量增加,微观结构遭到破坏,面筋网络结构断裂,对面条品质产生负面影响;CWPC处理后的面条水分含量显著提升(P<0.05),在5℃升高至73.35%,预冷至20℃和15℃的面条有较好的拉伸特性和面筋网络结构,但随着预冷终温的降低,面条吸入更多的水分,形成了更多的冰晶,面条的品质特性有所下降;VPC处理后的面条水分含量显著(P<0.05)降低,在5℃时达到最低,与对照组相比下降了3.13%。VPC处理后的面条在硬度、弹性、黏性、咀嚼性上都存在下降趋势,蛋白质二级结构更有序,微观结构更连续、致密。因此,VPC对冷冻熟面的品质特性产生正面影响。研究结果为不同预冷方式在冷冻熟面产业中的应用提供了理论参考。展开更多
The potential of high-intensity lasers to influence nuclear decay processes has attracted considerable interest.This study quantitatively evaluated the effects of high-intensity lasers on α decay and cluster radioact...The potential of high-intensity lasers to influence nuclear decay processes has attracted considerable interest.This study quantitatively evaluated the effects of high-intensity lasers on α decay and cluster radioactivity.Our calculations revealed that,among the parent nuclei investigated,^(144)Nd is the most susceptible to laser-induced alterations,primarily because of its relatively low decay energy.Additionally,circularly polarized lasers exhibit a greater impact on decay modifications than linearly polarized lasers.Given the limited time resolution of current detectors,it is essential to account for the timeaveraging effect of the laser.By incorporating the effects of circular polarization,time averaging,and angular averaging,our theoretical predictions indicated that the modification of^(144)Nd decay could reach 0.1%at an intensity of 10^(27)W/cm^(2).However,this intensity significantly exceeds the current laser capability of 10^(23)W/cm^(2),and the predicted modification of 0.1%remains below the detection threshold of contemporary measurement techniques.Observing laser-assistedαdecay and^(14)C cluster radioactivity will likely remain unfeasible until both ultrahigh laser intensities and significant advancements in experimental resolution are achieved.展开更多
基金financially supported by the National Basic Research Program of China (No. 2013CBA01803)the National Natural Science Foundation of China (No. 41101065)and the CAS "Equipment Development Project for Scientific Research" (No. YZ201523)
文摘Adopting the quasi-three-dimensional （Quasi-3D） numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe con-veyance distance （SCD） of a water pipeline and six influencing factors are established based on the lowest water temper-ature （LWT） along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration （MFP） instead of the mean annual ground surface temperature （MAGST） and soil water content （SWC） to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is estab-lished based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters： the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Science(No.XDA02030000)
文摘The fluoride volatility method (FVM) is a technique tailored to separate uranium from fuel salt of molten salt reactors. A key challenge in R&D of the FVM is corrosion due to the presence of molten salt and corrosive gases at high temperature. In this work, a frozen-wall technique was proposed to produce a physical barrier between construction materials and corrosive reactants. The protective performance of the frozen wall against molten salt was assessed using FLiNaK molten salt with introduced fluorine gas, which was regarded as a simulation of the FVM process. SS304, SS316L, Inconel 600 and graphite were chosen as the test samples. The extent of corrosion was characterized by an analysis of weight loss and scanning electron microscope studies. All four test samples suffered severe corrosion in the molten salt phase with the corrosion resistance as: Inconel 600>SS316L>graphite>SS304. The presence of the frozen wall could protect materials against corrosion by molten salt and corrosive gases, and compared with materials exposed to molten salt, the corrosion rates of materials protected by the frozen wall were decreased by at least one order of magnitude.
基金US Department of Transportation through Alaska University Transportation Centerthe State of Alaska Department of Transportation and Public Facilities(AK DOT&PF)under Project AUTC#410015
文摘Lateral spread of frozen ground crust over liquefied soil has caused extensive bridge foundation damage in the past winter earthquakes.A shake table experiment was conducted to investigate the performance of a model pile in this scenario and revealed unique pile failure mechanisms.The modelling results provided valuable data for validating numerical models.This paper presents analyses and results of this experiment using two numerical modeling approaches： solid-fluid coupled finite element（FE） modeling and the beam-on-nonlinear-Winkler-foundation（BNWF） method.A FE model was constructed based on the experiment configuration and subjected to earthquake loading.Soil and pile response results were presented and compared with experimental results to validate this model.The BNWF method was used to predict the pile response and failure mechanism.A p-y curve was presented for modelling the frozen ground crust with the free-field displacement from the experiment as loading.Pile responses were presented and compared with those of the experiment and FE model.It was concluded that the coupled FE model was effective in predicting formation of three plastic hinges at ground surface,ground crust-liquefiable soil interface and within the medium dense sand layer,while the BNWF method was only able to predict the latter two.
基金supported by the National Natural Science Foundation of China (No. 50578120)the National High Technology Research and Development Program of China (863 Program) (No. 2006AA11Z118)
文摘The average temperature of frozen soil wall is an essential parameter in the process of design, construction, and safety manage- ment of artificial ground freezing engineering. It is the basis of calculating frozen soil＇s mechanical parameters, fiarther prediction of bearing capacity and, ultimately, safety evaluation of the frozen soil wall. Regarding the average temperature of sin- gle-row-piped frozen soil wall, this paper summarizes several current calculation methods and their shortcomings. Furthermore, on the basis of Bakholdin＇s analytical solution for the temperature field under straight single-row-piped freezing, two new calcula- tion models, namely, the equivalent trapezoid model and the equivalent triangle model, are proposed. These two approaches are used to calculate the average temperature of a certain cross section which indicates the condition of the whole frozen soil wall. Considering the possible parameter range according to the freezing pipe layout that might be applied in actual construction, this paper compares the average temperatures of frozen soil walls obtained by the equivalent trapezoid method and the equivalent tri- angle method with that obtained by numerical integration of Bakholdin＇s analytical solution. The results show that the discrepancies are extremely small and these two new approaches are better than currently prevailing methods. However, the equivalent triangle method boasts higher accuracy and a simpler formula compared with the equivalent trapezoid method.
文摘This paper presents an implementation and posterior analysis of the convergence of the panel method. The implemented panel method is based on vortex lines and an unsteady wake on a flat plate as a wing. The main goal of the study was to discover parameters and their values range to obtain convergence of the solution. Results of lift convergence in function of control panel’s position, the effect of the size of the wake panels, the dimension of the wake, and the computation time are quantitatively described. The lift results are similar to the predictions by the lifting-line theory and the wake exhibited an expected shape, showing wingtip, and start vortices. Geometric parameters and non-dimensional values were developed to increase accuracy and stability of the method.
基金supported by the National Natural Science Foundation of China (10702078)the Research Foundation of National University of Defense Technology (JC08-01-05)
文摘Sun synchronous orbit and frozen orbit formed due to J 2 perturbation have very strict constraints on orbital parameters,which have restricted the application a lot.In this paper,several control strategies were illustrated to realize Sun synchronous frozen orbit with arbitrary orbital elements using continuous low-thrust.Firstly,according to mean element method,the averaged rate of change of the orbital elements,originating from disturbing constant accelerations over one orbital period,was derived from Gauss＇ variation of parameters equations.Then,we proposed that binormal acceleration could be used to realize Sun synchronous orbit,and radial or transverse acceleration could be adopted to eliminate the rotation of the argument of the perigee.Finally,amending methods on the control strategies mentioned above were presented to eliminate the residual secular growth.Simulation results showed that the control strategies illustrated in this paper could realize Sun synchronous frozen orbit with arbitrary orbital elements,and can save much more energy than the schemes presented in previous studies,and have no side effect on other orbital parameters＇ secular motion.
文摘冷冻熟面因口感好、方便等特点,发展潜力巨大。预冷是影响其品质的关键因素,为探究冷冻熟面在不同预冷方式处理的过程中品质特性的变化,选取了3种预冷方式:冰箱预冷(refrigerator pre-cooling,RPC)、冷水预冷(cold water pre-cooling,CWPC)、真空预冷(vacuum pre-cooling,VPC),4种预冷终温:20、15、10、5℃,对面条进行预冷。利用质构仪、傅里叶红外光谱仪、低场核磁等手段,探究不同预冷方式对冷冻熟面水分含量、质构特性、微观结构、蛋白质二级结构、水分分布等特性的影响规律。结果表明:RPC处理后的面条自由水含量增加,微观结构遭到破坏,面筋网络结构断裂,对面条品质产生负面影响;CWPC处理后的面条水分含量显著提升(P<0.05),在5℃升高至73.35%,预冷至20℃和15℃的面条有较好的拉伸特性和面筋网络结构,但随着预冷终温的降低,面条吸入更多的水分,形成了更多的冰晶,面条的品质特性有所下降;VPC处理后的面条水分含量显著(P<0.05)降低,在5℃时达到最低,与对照组相比下降了3.13%。VPC处理后的面条在硬度、弹性、黏性、咀嚼性上都存在下降趋势,蛋白质二级结构更有序,微观结构更连续、致密。因此,VPC对冷冻熟面的品质特性产生正面影响。研究结果为不同预冷方式在冷冻熟面产业中的应用提供了理论参考。
基金supported by the National Natural Science Foundation of China(Nos.12475136 and 12075327)。
文摘The potential of high-intensity lasers to influence nuclear decay processes has attracted considerable interest.This study quantitatively evaluated the effects of high-intensity lasers on α decay and cluster radioactivity.Our calculations revealed that,among the parent nuclei investigated,^(144)Nd is the most susceptible to laser-induced alterations,primarily because of its relatively low decay energy.Additionally,circularly polarized lasers exhibit a greater impact on decay modifications than linearly polarized lasers.Given the limited time resolution of current detectors,it is essential to account for the timeaveraging effect of the laser.By incorporating the effects of circular polarization,time averaging,and angular averaging,our theoretical predictions indicated that the modification of^(144)Nd decay could reach 0.1%at an intensity of 10^(27)W/cm^(2).However,this intensity significantly exceeds the current laser capability of 10^(23)W/cm^(2),and the predicted modification of 0.1%remains below the detection threshold of contemporary measurement techniques.Observing laser-assistedαdecay and^(14)C cluster radioactivity will likely remain unfeasible until both ultrahigh laser intensities and significant advancements in experimental resolution are achieved.
