Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS...Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS parametric modeling technology is used to construct its three-dimensional geometric model,and geometric simplification is carried out.Two surface treatment processes,HK-35 zinc nickel alloy electroplating and pure zinc electroplating,were designed,and the influence of different coatings on the mechanical properties of steering knuckles was compared and analyzed through numerical simulation.At the same time,standard specimens were prepared for salt spray corrosion testing and scratch method combined strength testing to verify the numerical simulation results.The results showed that under emergency braking and composite working conditions,the peak Von Mises stress of the zinc nickel alloy coating was 119.85 MPa,which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Its equivalent strain value was 652×10^(-6),which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Experimental data confirms that zinc nickel alloy coatings exhibit significant advantages in stress distribution uniformity,strain performance,and load-bearing capacity in high stress zones.The salt spray corrosion test further indicates that the coating has superior corrosion resistance and coating substrate interface bonding strength,which can significantly improve the mechanical stability and long-term reliability of automotive precision electroplating mechanical structures.展开更多
Seismic fragility analysis(SFA)is known as an effective probabilistic-based approach used to evaluate seismic fragility.There are various sources of uncertainties associated with this approach.A nuclear power plant(NP...Seismic fragility analysis(SFA)is known as an effective probabilistic-based approach used to evaluate seismic fragility.There are various sources of uncertainties associated with this approach.A nuclear power plant(NPP)system is an extremely important infrastructure and contains many structural uncertainties due to construction issues or structural deterioration during service.Simulation of structural uncertainties effects is a costly and time-consuming endeavor.A novel approach to SFA for the NPP considering structural uncertainties based on the damage state is proposed and examined.The results suggest that considering the structural uncertainties is essential in assessing the fragility of the NPP structure,and the impact of structural uncertainties tends to increase with the state of damage.Subsequently,machine learning(ML)is found to be superior in high-precision damage state identification of the NPP for reducing the time of nonlinear time-history analysis(NLTHA)and could be applied in the damage state-based SFA.Also,the impact of various sources of uncertainties is investigated through sensitivity analysis.The Sobol and Shapley additive explanations(SHAP)method can be complementary to each other and able to solve the problem of quantifying seismic and structural uncertainties simultaneously and the interaction effect of each parameter.展开更多
Double-shaft-driven needle punching machine is a specialized equipment designed for processing C/C crucible preforms.Its main needle punching module is operated by two sets of reciprocating crank-slider mechanisms.The...Double-shaft-driven needle punching machine is a specialized equipment designed for processing C/C crucible preforms.Its main needle punching module is operated by two sets of reciprocating crank-slider mechanisms.The intense vibration during needle punching not only generates huge noise,but also substantially reduces the quality of the preform.It is imperative to perform a dynamic analysis and optimization of the entire needle punching machine.In this paper,the three-dimensional(3D)model of the entire double-shaft-driven needle punching machine for C/C crucible preforms is established.Based on the modal analysis theory,the modal characteristics of the needle punching machine under various operating conditions are analyzed and its natural frequencies and vibration modes are determined.The harmonic response analysis is then employed to obtain the amplitude of the needle plate at different frequencies,and the structural weak points of the needle punching machine are identified and improved.The feasibility of the optimized scheme is subsequently reevaluated and verified.The results indicate that the first six natural frequencies of the machine increase,and the maximum amplitude of the needle plate decreases by 70.3%.The enhanced dynamic characteristics of the machine significantly improve its performance,enabling more efficient needle punching of C/C crucible preforms.展开更多
With the acceleration of the global aging process and the increase of cardiovascular ancerebrovascular diseases,more and more patients are paralyzed due to accidents,so theexoskeleton robot began to appear in people&#...With the acceleration of the global aging process and the increase of cardiovascular ancerebrovascular diseases,more and more patients are paralyzed due to accidents,so theexoskeleton robot began to appear in people's sight,and the lower limb exoskeleton robot withrehabilitation training is also favored by more and more people.In this paper,the structural designand analysis of the lower limb exoskeleton robot are carried out in view of the patients'expectation ofnormal walking.First,gait analysis and structural design of lower limb exoskeleton robot.Based onthe analysis of the walking gait of normal people,the freedom of the three key joints of the lower limbexoskeleton robot hip joint,knee joint and ankle joint is determined.at the same time,according tothe structuralcharacteristics of each joint,the three key joints are modeled respectively,and theoverall model assembly of the lower limb exoskeleton robot is completed.Secondly,the kinematicsanalysis of the lower limb exoskeleton robot was carried out to obtain the relationship between thelinear displacement,linear speed and acceleration of each joint,so as to ensure the coordination ofthe model with the human lower limb movement.Thirdly,the static analysis of typical gait of hipjoint,knee joint and ankle joint is carried out to verify the safety of the design model under thepremise of ensuring the structural strength requirements.Finally,the parts of the model were 3Dprinted,and the rationality of the design was further verified in the process of assembling the model.展开更多
In the structural reliability analysis,the first-order reliability method(FORM)often yields significant errors when addressing nonlinear problems.Although the second-order reliability method(SORM)can provide higher ac...In the structural reliability analysis,the first-order reliability method(FORM)often yields significant errors when addressing nonlinear problems.Although the second-order reliability method(SORM)can provide higher accuracy,the additional computation of the Hessian matrix leads to lower computational efficiency.Additionally,when the dimensionality of the random variables is high,the approximation formula of SORM can result in larger errors.To address these issues,a structural reliability analysis method based on Kriging and spherical cap area integral is proposed.Firstly,this method integrates FORM with the quasi-Newton algorithm Broyden-Fletcher-Goldfarb-Shanno(BFGS),trains the Kriging model by using sample points from the algorithm’s iteration process,and combines the Kriging model with gradient information to approximate the Hessian matrix.Then,the failure surface is approximated as a rotating paraboloid,utilizing the spherical cap to replace the complex surface.For the n-dimensional case,the hyperspherical cap area expression is combined with the integral method to calculate the failure probability.Finally,the method is validated through three examples,demonstrating improved computational accuracy and efficiency compared to traditional methods.展开更多
This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-...This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-oped using the material point method.To reduce the computational cost of Monte Carlo simulations,response surface models are created as surrogate models for the material point system to approximate its dynamic behavior.An adaptive randomized greedy algorithm is employed to construct a sparse polynomial chaos expansion model with a fixed order,effectively balancing the accuracy and computational efficiency of the surrogate model.Based on the sparse polynomial chaos expansion,sensitivity analysis is conducted using the global finite difference and Sobol methods.Several examples of structural dynamics are provided to demonstrate the effectiveness of the proposed method in addressing structural dynamics problems.展开更多
The state equation and observation equation of the structural dynamic systems under various analysis scales are derived based on wavelet packet analysis. The time-frequency properties of structural dynamic response un...The state equation and observation equation of the structural dynamic systems under various analysis scales are derived based on wavelet packet analysis. The time-frequency properties of structural dynamic response under various scales are further formulated. The theoretical analysis results reveal that the wavelet packet energy spectrum （WPES） obtained from wavelet packet decomposition of structural dynamic response will detect the presence of structural damage. The sensitivity analysis of the WPES to structural damage and measurement noise is also performed. The transfer properties of the structural system matrix and the observation noise under various analysis scales are formulated, which verify the damage alarming reliability using the proposed WPES with preferable damage sensitivity and noise robusticity.展开更多
Making use of modal characteristics of the natural vibration of flexible structure to design the oscillating wing aircraft is proposed. A series of equations concerning the oscillating wing of flexible structures are ...Making use of modal characteristics of the natural vibration of flexible structure to design the oscillating wing aircraft is proposed. A series of equations concerning the oscillating wing of flexible structures are derived. The kinetic equation for aerodynamic force coupled with elastic movement is set up, and relevant formulae are derived. The unsteady aerodynamic one in that formulae is revised. The design principle, design process and range of application of such oscillating wing analytical method are elaborated. A flexible structural oscillating wing model is set up, and relevant time response analysis and frequency response analysis are conducted. The analytical results indicate that adopting the new-type driving way for the oscillating wing will not have flutter problems and will be able to produce propulsive force. Furthermore, it will consume much less power than the fixed wing for generating the same lift.展开更多
Spot weld models are widely used in finite element analysis（FEA） of automotive body in white（BIW） to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on...Spot weld models are widely used in finite element analysis（FEA） of automotive body in white（BIW） to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on evaluation of the validity of these spot weld models in structural dynamic analysis of BIW.To evaluate the validity and accuracy of spot weld models in structural dynamic analysis of BIW,two object functions,error function and deviation function,are introduced innovatively.Modal analysis of Two-panel and Double-hat structures,which are the dominated structures in BIW,is conducted,and the values of these two object functions are obtained.Based on the values of object functions,the validity of these spot weld models are evaluated.It is found that the area contact method（ACM2） and weld element connection（CWELD） can give more precise prediction in modal analysis of these two classical structures,thus are more applicable to structural dynamic analysis of automotive BIW.Modal analysis of a classical BIW is performed,which further confirms this evaluation.The error function and deviation function proposed in this research can give guidance on the adaptability of spot weld models in structural dynamic analysis of BIW.And this evaluation method can also be adopted in evaluation of other finite element models in static,dynamic and other kinds of analysis for automotive structures.展开更多
In this paper,a framework is established for nonlinear flutter and gust response analyses based on an efficient Reduced Order Model(ROM).The proposed method can be used to solve the aeroelastic response problems of wi...In this paper,a framework is established for nonlinear flutter and gust response analyses based on an efficient Reduced Order Model(ROM).The proposed method can be used to solve the aeroelastic response problems of wings containing geometric nonlinearities.A structural modeling approach presented herein describes the stiffness nonlinearities with a modal formulation.Two orthogonal spanwise modes describe the foreshortening effects of the wing.Dynamic linearization of the ROM under nonlinear equilibrium states is applied to a nonlinear flutter analysis,and the fully nonlinear ROM coupled with the non-planar Unsteady Vortex Lattice Method(UVLM)is applied to gust response analysis.Furthermore,extended Precise Integration Method(PIM)ensures accuracy of the dynamic equation solutions.To demonstrate applicability and accuracy of the method presented,a wind tunnel test is conducted and good agreements between theoretical and test results of nonlinear flutter speed and gust response deflection are reached.The method described in this paper is suitable for predicting the nonlinear flutter speed and calculating the gust responses of a large-aspect-ratio wing in time domain.Meanwhile,the results derived highlight the effects of geometric nonlinearities obviously.展开更多
High-quality LDH-SO4-CO3 whiskers were synthesized via liquid precipitation method using MgSO4·7 H2 O and Al2(SO4)3·18 H2O as precursors and Na2CO3-NaHCO3 buffer solution as precipitant. The influence of buf...High-quality LDH-SO4-CO3 whiskers were synthesized via liquid precipitation method using MgSO4·7 H2 O and Al2(SO4)3·18 H2O as precursors and Na2CO3-NaHCO3 buffer solution as precipitant. The influence of buffer solution concentration on the characteristics of the samples was investigated. The asgrown whiskers were characterized by X-ray diffraction, transmission electron microscopy, and BrunauerEmmett-Teller N2 specific surface area measurements. The results show that the buffer solution concentration has significant impact on whiskers with intercalated structure. The LDH-SO4-CO3 whiskers with well-defined geometry, distinct intercalated structure, decent quality, and excellent dispersing capability can be obtained under the following conditions: buffer solution volume ratio of 45%, reaction temperature of 83°C, and reaction time of 182 h. The obtained whiskers are well-crystallized and exhibit homogeneous morphology consisting of fiber bars.展开更多
Water-soluble crude polyseccharide（PIP） was extracted from cultured mycelium of the fungus Phellinus igniarius. After ethanol precipitation and sepharose CL-6B gel filtration, the fraction of PIP1 was obtained, whic...Water-soluble crude polyseccharide（PIP） was extracted from cultured mycelium of the fungus Phellinus igniarius. After ethanol precipitation and sepharose CL-6B gel filtration, the fraction of PIP1 was obtained, which was shown to be a homogeneous polysaccharide by means of high-performance liquid chromatography. The structure of PIPt was determined by using several methods. C.,C analysis indicates that PIP1 is composed of the monosaccharides of glucose, galactose, and mannose. Their malar ratio is 3. 70： 4. 06： 1.00. The molar weight was estimated to be 17 kd via HPLC. IR, GC, partial hydrolysis with acid, pefiedate oxidation, Smith degradation, methylation, and GC-MS analysis were used for the structural analyses of PIP1. The results show that PIP1 has a small quantity of branch structure, The main glycosidic linkage of PIP1 has a β-configurafion. The main chain is made up of a large mass of glucose （ 1→3 ） and few mannose （ 1→4 ） ; the side chain is composed of glucose （ 1 →3 ） and galactose （ 1→6 ） ; the nonreduced end is composed of galactose and glucose. The side chains are branched at 6-0 of glucose（ 1→3,6） and mannose（1→4,6）. On an average, there are three branches among 20 residues. It is presumable that the existence of 1,3-linked Glc in the main and side chains is the main reason for its higher antitumor activity.展开更多
Isogeometric analysis(IGA),an approach that integrates CAE into conventional CAD design tools,has been used in structural optimization for 10 years,with plenty of excellent research results.This paper provides a compr...Isogeometric analysis(IGA),an approach that integrates CAE into conventional CAD design tools,has been used in structural optimization for 10 years,with plenty of excellent research results.This paper provides a comprehensive review on isogeometric shape and topology optimization,with a brief coverage of size optimization.For isogeometric shape optimization,attention is focused on the parametrization methods,mesh updating schemes and shape sensitivity analyses.Some interesting observations,e.g.the popularity of using direct(differential)method for shape sensitivity analysis and the possibility of developing a large scale,seamlessly integrated analysis-design platform,are discussed in the framework of isogeometric shape optimization.For isogeometric topology optimization(ITO),we discuss different types of ITOs,e.g.ITO using SIMP(Solid Isotropic Material with Penalization)method,ITO using level set method,ITO using moving morphable com-ponents(MMC),ITO with phase field model,etc.,their technical details and applications such as the spline filter,multi-resolution approach,multi-material problems and stress con-strained problems.In addition to the review in the last 10 years,the current developmental trend of isogeometric structural optimization is discussed.展开更多
This paper presents a new concept for enhancing the seismic ductility and damping capacity of diagrid structural frames by using shear-link fuse devices and its seismic performance is assessed through nonlinear static...This paper presents a new concept for enhancing the seismic ductility and damping capacity of diagrid structural frames by using shear-link fuse devices and its seismic performance is assessed through nonlinear static and dynamic analysis. The architectural elegancy of the diagrid structure attributed to its triangular leaning member configuration and high structural redundancy make this system a desirable choice for tall building design. However, forming a stable energy dissipation mechanism in diagrid framing remains to be investigated to expand its use in regions with high seismicity. To address this issue, a diagrid framing design is proposed here which provides a competitive design option in highly seismic regions through its increased ductility and improved energy dissipation capacity provided by replaceable shear links interconnecting the diagonal members at their ends.The structural characteristics and seismic behavior （capacity, stiffness, energy dissipation, ductility） of the diagrid structural frame are demonstrated with a 21-story building diagrid frame subjected to nonlinear static and dynamic analysis. The findings from the nonfinear time history analysis verify that satisfactory seismic performance can be achieved by the proposed diagrid frame subjected to design basis earthquakes in California. In particular, one appealing feature of the proposed diagrid building is its reduced residual displacement after strong earthquakes.展开更多
A unified structural model for high-aspect-ratio composite wing with arbitrary cross-section is developed. Two types of lay-ups of the composite wing, namely, circumferentially uniform stiffness （CUS） configuration ...A unified structural model for high-aspect-ratio composite wing with arbitrary cross-section is developed. Two types of lay-ups of the composite wing, namely, circumferentially uniform stiffness （CUS） configuration and circumferentially asymmetric stiffness （CAS） configuration, are investigated. The present structural modeling method is validated through ANSYS FEM software for the case of a composite box beam. Then, the case of a single-cell composite wing with NACA0012 airfoil shape is considered. To investigate the aeroelastic problem of high-aspect-ratio composite wings, the linear ONERA aerodynamic model is used to model the unsteady aerodynamic loads under the case of small angle of attack. Finally, flutter speeds of the high-aspect-ratio wing with various composite ply angles are determined by using U-g method.展开更多
Economic losses and catastrophic casualties may occur once super high-rise structures are struck by low-probability but high-consequence scenarios of concurrent earthquakes and winds. Therefore, accurately predicting ...Economic losses and catastrophic casualties may occur once super high-rise structures are struck by low-probability but high-consequence scenarios of concurrent earthquakes and winds. Therefore, accurately predicting multi-hazard dynamic responses to super high-rise structures has significant engineering and scientific value. This study performed a parametric global sensitivity analysis (GSA) for multi-hazard dynamic response prediction of super high-rise structures using the multiple-degree-of-freedom shear (MFS) model. Polynomial chaos Kriging (PCK) was introduced to build a surrogate model that allowed GSA to be combined with Sobol’ indices. Monte Carlo simulation (MCS) is also conducted for the comparison to verify the accuracy and efficiency of the PCK method. Parametric sensitivity analysis is performed for a wide range of aleatory uncertainty (intensities of coupled multi-hazard), epistemic uncertainty (bending stiffness, k_(m);shear stiffness, kq;density, ρ;and damping ratio, ξ), probability distribution types, and coefficients of variation. The results indicate that epistemic uncertainty parameters, k_(m), ρ, and ξ dramatically affect the multi-hazard dynamic responses of super high-rise structures;in addition, Sobol’ indices between the normal and lognormal distributions are insignificant, while the variation levels have remarkably influenced the sensitivity indices.展开更多
To evaluate the structural failure risk of the regenerative cooling thrust chamber cylinder segment,a Finite Element Method(FEM)based on experimental data was developed.The methodology was validated and utilized to re...To evaluate the structural failure risk of the regenerative cooling thrust chamber cylinder segment,a Finite Element Method(FEM)based on experimental data was developed.The methodology was validated and utilized to reveal the thermal response and the nonlinear deformation behavior of the cylinder segment phase by phase.The conclusions of the research are as follows:The 2 D heat flux distribution caused by the injector determines the uneven temperature distribution on the gas-side wall and leads to the temperature disparity between various cooling channels;The reason for the accumulation of residual strain is that the tensile strain generated in the post-cooling phase is greater than the compressive strain produced in the hot run phase;Through the single-cycle simulation,two potential failure locations with conspicuous deformations were found,but it is difficult to determine which point is more dangerous.However,the multi-cycle thermo-structural analysis gives the evolution of the stress-strain curve and gradually discloses that the low-temperature corner of a particular channel is the most likely location to fail,rather than the maximum residual strain point of the gas-side wall.The damage analysis for dangerous point indicates that the quasistatic damage accounts for the majority of the total damage and is the main factor limiting the service life.展开更多
During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vib...During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vibration-based health monitoring methods is to seek some damage indices that are sensitive to structural damage, This paper proposes an online structural health monitoring method for long-span suspension bridges using wavelet packet transform （WPT）. The WPT- based method is based on the energy variations of structural ambient vibration responses decomposed using wavelet packet analysis. The main feature of this method is that the proposed wavelet packet energy spectrum （WPES） has the ability to detect structural damage from ambient vibration tests of a long-span suspension bridge. As an example application, the WPES-based health monitoring system is used on the Runyang Suspension Bridge under daily environmental conditions. The analysis reveals that changes in environmental temperature have a long-term influence on the WPES, while the effect of traffic loadings on the measured WPES of the bridge presents instantaneous changes because of the nonstationary properties of the loadings. The condition indication indices VD reflect the influences of environmental temperature on the dynamic properties of the Runyang Suspension Bridge. The field tests demonstrate that the proposed WPES-based condition indication index VD is a good candidate index for health monitoring of long-span suspension bridges under ambient excitations.展开更多
The connection efficiency of composite pre-tightened multi-tooth joint is low because of uneven load distribution and single load transmission path.In this paper,based on the principle of bio-tooth(suture)structure,co...The connection efficiency of composite pre-tightened multi-tooth joint is low because of uneven load distribution and single load transmission path.In this paper,based on the principle of bio-tooth(suture)structure,combining soft material with fractal,a composite pre-tightened multi-hierarchy tooth joint is proposed,and the bearing performance and failure process of the joint through experiments and finite element method under tensile load.First,the ultimate bearing capacity,load distribution ratio,and failure process of different hierarchies of teeth joints are studied through experiments.Then,the progressive damage models of different hierarchies of tooth joints are established,and experiments verify the validity of the finite element model.Finally,the effects of soft material and increasing tooth hierarchy on the failure process and bearing capacity of composite pre-tightened tooth joints are analyzed by the finite element method.The following conclusions can be drawn:(1)The embedding of soft materials changed the failure process of the joint.Increasing the tooth hierarchy can give the joint more load transfer paths,but the failure process of the joint is complicated.(2)Embedding soft materials and increasing the tooth hierarchy simultaneously can effectively improve the bearing capacity of composite pre-tightened tooth joints,which is 87.8%higher than that of traditional three-tooth joints.展开更多
文摘Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS parametric modeling technology is used to construct its three-dimensional geometric model,and geometric simplification is carried out.Two surface treatment processes,HK-35 zinc nickel alloy electroplating and pure zinc electroplating,were designed,and the influence of different coatings on the mechanical properties of steering knuckles was compared and analyzed through numerical simulation.At the same time,standard specimens were prepared for salt spray corrosion testing and scratch method combined strength testing to verify the numerical simulation results.The results showed that under emergency braking and composite working conditions,the peak Von Mises stress of the zinc nickel alloy coating was 119.85 MPa,which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Its equivalent strain value was 652×10^(-6),which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Experimental data confirms that zinc nickel alloy coatings exhibit significant advantages in stress distribution uniformity,strain performance,and load-bearing capacity in high stress zones.The salt spray corrosion test further indicates that the coating has superior corrosion resistance and coating substrate interface bonding strength,which can significantly improve the mechanical stability and long-term reliability of automotive precision electroplating mechanical structures.
基金National Natural Science Foundation of China under Grant Nos.52208191 and 51908397Shanxi Province Science Foundation for Youths under Grant No.201901D211025China Postdoctoral Science Foundation under Grant No.2020M670695。
文摘Seismic fragility analysis(SFA)is known as an effective probabilistic-based approach used to evaluate seismic fragility.There are various sources of uncertainties associated with this approach.A nuclear power plant(NPP)system is an extremely important infrastructure and contains many structural uncertainties due to construction issues or structural deterioration during service.Simulation of structural uncertainties effects is a costly and time-consuming endeavor.A novel approach to SFA for the NPP considering structural uncertainties based on the damage state is proposed and examined.The results suggest that considering the structural uncertainties is essential in assessing the fragility of the NPP structure,and the impact of structural uncertainties tends to increase with the state of damage.Subsequently,machine learning(ML)is found to be superior in high-precision damage state identification of the NPP for reducing the time of nonlinear time-history analysis(NLTHA)and could be applied in the damage state-based SFA.Also,the impact of various sources of uncertainties is investigated through sensitivity analysis.The Sobol and Shapley additive explanations(SHAP)method can be complementary to each other and able to solve the problem of quantifying seismic and structural uncertainties simultaneously and the interaction effect of each parameter.
基金Open Project of Shanghai Key Laboratory of Lightweight Composite,China(No.2232021A4-04)。
文摘Double-shaft-driven needle punching machine is a specialized equipment designed for processing C/C crucible preforms.Its main needle punching module is operated by two sets of reciprocating crank-slider mechanisms.The intense vibration during needle punching not only generates huge noise,but also substantially reduces the quality of the preform.It is imperative to perform a dynamic analysis and optimization of the entire needle punching machine.In this paper,the three-dimensional(3D)model of the entire double-shaft-driven needle punching machine for C/C crucible preforms is established.Based on the modal analysis theory,the modal characteristics of the needle punching machine under various operating conditions are analyzed and its natural frequencies and vibration modes are determined.The harmonic response analysis is then employed to obtain the amplitude of the needle plate at different frequencies,and the structural weak points of the needle punching machine are identified and improved.The feasibility of the optimized scheme is subsequently reevaluated and verified.The results indicate that the first six natural frequencies of the machine increase,and the maximum amplitude of the needle plate decreases by 70.3%.The enhanced dynamic characteristics of the machine significantly improve its performance,enabling more efficient needle punching of C/C crucible preforms.
基金College Student Innovation andEntrepreneurship Project(Grant No.:S202414435026)ingkou Institute of Technology campus level research project——Development of food additive supercritical extraction equipment and fluid transmission systemresearch(Grant No.HX202427).
文摘With the acceleration of the global aging process and the increase of cardiovascular ancerebrovascular diseases,more and more patients are paralyzed due to accidents,so theexoskeleton robot began to appear in people's sight,and the lower limb exoskeleton robot withrehabilitation training is also favored by more and more people.In this paper,the structural designand analysis of the lower limb exoskeleton robot are carried out in view of the patients'expectation ofnormal walking.First,gait analysis and structural design of lower limb exoskeleton robot.Based onthe analysis of the walking gait of normal people,the freedom of the three key joints of the lower limbexoskeleton robot hip joint,knee joint and ankle joint is determined.at the same time,according tothe structuralcharacteristics of each joint,the three key joints are modeled respectively,and theoverall model assembly of the lower limb exoskeleton robot is completed.Secondly,the kinematicsanalysis of the lower limb exoskeleton robot was carried out to obtain the relationship between thelinear displacement,linear speed and acceleration of each joint,so as to ensure the coordination ofthe model with the human lower limb movement.Thirdly,the static analysis of typical gait of hipjoint,knee joint and ankle joint is carried out to verify the safety of the design model under thepremise of ensuring the structural strength requirements.Finally,the parts of the model were 3Dprinted,and the rationality of the design was further verified in the process of assembling the model.
基金National Natural Science Foundation of China(No.52375236)Fundamental Research Funds for the Central Universities,China(No.23D110316)。
文摘In the structural reliability analysis,the first-order reliability method(FORM)often yields significant errors when addressing nonlinear problems.Although the second-order reliability method(SORM)can provide higher accuracy,the additional computation of the Hessian matrix leads to lower computational efficiency.Additionally,when the dimensionality of the random variables is high,the approximation formula of SORM can result in larger errors.To address these issues,a structural reliability analysis method based on Kriging and spherical cap area integral is proposed.Firstly,this method integrates FORM with the quasi-Newton algorithm Broyden-Fletcher-Goldfarb-Shanno(BFGS),trains the Kriging model by using sample points from the algorithm’s iteration process,and combines the Kriging model with gradient information to approximate the Hessian matrix.Then,the failure surface is approximated as a rotating paraboloid,utilizing the spherical cap to replace the complex surface.For the n-dimensional case,the hyperspherical cap area expression is combined with the integral method to calculate the failure probability.Finally,the method is validated through three examples,demonstrating improved computational accuracy and efficiency compared to traditional methods.
基金support from the National Natural Science Foundation of China(Grant Nos.52174123&52274222).
文摘This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-oped using the material point method.To reduce the computational cost of Monte Carlo simulations,response surface models are created as surrogate models for the material point system to approximate its dynamic behavior.An adaptive randomized greedy algorithm is employed to construct a sparse polynomial chaos expansion model with a fixed order,effectively balancing the accuracy and computational efficiency of the surrogate model.Based on the sparse polynomial chaos expansion,sensitivity analysis is conducted using the global finite difference and Sobol methods.Several examples of structural dynamics are provided to demonstrate the effectiveness of the proposed method in addressing structural dynamics problems.
文摘The state equation and observation equation of the structural dynamic systems under various analysis scales are derived based on wavelet packet analysis. The time-frequency properties of structural dynamic response under various scales are further formulated. The theoretical analysis results reveal that the wavelet packet energy spectrum （WPES） obtained from wavelet packet decomposition of structural dynamic response will detect the presence of structural damage. The sensitivity analysis of the WPES to structural damage and measurement noise is also performed. The transfer properties of the structural system matrix and the observation noise under various analysis scales are formulated, which verify the damage alarming reliability using the proposed WPES with preferable damage sensitivity and noise robusticity.
基金National Natural Science Foundation of China(10432040, 90716006)
文摘Making use of modal characteristics of the natural vibration of flexible structure to design the oscillating wing aircraft is proposed. A series of equations concerning the oscillating wing of flexible structures are derived. The kinetic equation for aerodynamic force coupled with elastic movement is set up, and relevant formulae are derived. The unsteady aerodynamic one in that formulae is revised. The design principle, design process and range of application of such oscillating wing analytical method are elaborated. A flexible structural oscillating wing model is set up, and relevant time response analysis and frequency response analysis are conducted. The analytical results indicate that adopting the new-type driving way for the oscillating wing will not have flutter problems and will be able to produce propulsive force. Furthermore, it will consume much less power than the fixed wing for generating the same lift.
基金supported by National Natural Science Foundation of China(Grant No.10772060)Heilongjiang Provincial Natural Science Foundation with Excellent Young Investigators of China(GrantNo.JC2006-13)
文摘Spot weld models are widely used in finite element analysis（FEA） of automotive body in white（BIW） to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on evaluation of the validity of these spot weld models in structural dynamic analysis of BIW.To evaluate the validity and accuracy of spot weld models in structural dynamic analysis of BIW,two object functions,error function and deviation function,are introduced innovatively.Modal analysis of Two-panel and Double-hat structures,which are the dominated structures in BIW,is conducted,and the values of these two object functions are obtained.Based on the values of object functions,the validity of these spot weld models are evaluated.It is found that the area contact method（ACM2） and weld element connection（CWELD） can give more precise prediction in modal analysis of these two classical structures,thus are more applicable to structural dynamic analysis of automotive BIW.Modal analysis of a classical BIW is performed,which further confirms this evaluation.The error function and deviation function proposed in this research can give guidance on the adaptability of spot weld models in structural dynamic analysis of BIW.And this evaluation method can also be adopted in evaluation of other finite element models in static,dynamic and other kinds of analysis for automotive structures.
基金supported by the National Key Research and Development Program of China(No.2016YFB 0200703).
文摘In this paper,a framework is established for nonlinear flutter and gust response analyses based on an efficient Reduced Order Model(ROM).The proposed method can be used to solve the aeroelastic response problems of wings containing geometric nonlinearities.A structural modeling approach presented herein describes the stiffness nonlinearities with a modal formulation.Two orthogonal spanwise modes describe the foreshortening effects of the wing.Dynamic linearization of the ROM under nonlinear equilibrium states is applied to a nonlinear flutter analysis,and the fully nonlinear ROM coupled with the non-planar Unsteady Vortex Lattice Method(UVLM)is applied to gust response analysis.Furthermore,extended Precise Integration Method(PIM)ensures accuracy of the dynamic equation solutions.To demonstrate applicability and accuracy of the method presented,a wind tunnel test is conducted and good agreements between theoretical and test results of nonlinear flutter speed and gust response deflection are reached.The method described in this paper is suitable for predicting the nonlinear flutter speed and calculating the gust responses of a large-aspect-ratio wing in time domain.Meanwhile,the results derived highlight the effects of geometric nonlinearities obviously.
基金Funded by National Natural Science Foundation of China(No.51272207)Science and Technology Plan of Guangdong Province((No.2013B021100019)
文摘High-quality LDH-SO4-CO3 whiskers were synthesized via liquid precipitation method using MgSO4·7 H2 O and Al2(SO4)3·18 H2O as precursors and Na2CO3-NaHCO3 buffer solution as precipitant. The influence of buffer solution concentration on the characteristics of the samples was investigated. The asgrown whiskers were characterized by X-ray diffraction, transmission electron microscopy, and BrunauerEmmett-Teller N2 specific surface area measurements. The results show that the buffer solution concentration has significant impact on whiskers with intercalated structure. The LDH-SO4-CO3 whiskers with well-defined geometry, distinct intercalated structure, decent quality, and excellent dispersing capability can be obtained under the following conditions: buffer solution volume ratio of 45%, reaction temperature of 83°C, and reaction time of 182 h. The obtained whiskers are well-crystallized and exhibit homogeneous morphology consisting of fiber bars.
基金Supported by the Science and Technique Bureau of Wenzhou City(No. S2005A003).
文摘Water-soluble crude polyseccharide（PIP） was extracted from cultured mycelium of the fungus Phellinus igniarius. After ethanol precipitation and sepharose CL-6B gel filtration, the fraction of PIP1 was obtained, which was shown to be a homogeneous polysaccharide by means of high-performance liquid chromatography. The structure of PIPt was determined by using several methods. C.,C analysis indicates that PIP1 is composed of the monosaccharides of glucose, galactose, and mannose. Their malar ratio is 3. 70： 4. 06： 1.00. The molar weight was estimated to be 17 kd via HPLC. IR, GC, partial hydrolysis with acid, pefiedate oxidation, Smith degradation, methylation, and GC-MS analysis were used for the structural analyses of PIP1. The results show that PIP1 has a small quantity of branch structure, The main glycosidic linkage of PIP1 has a β-configurafion. The main chain is made up of a large mass of glucose （ 1→3 ） and few mannose （ 1→4 ） ; the side chain is composed of glucose （ 1 →3 ） and galactose （ 1→6 ） ; the nonreduced end is composed of galactose and glucose. The side chains are branched at 6-0 of glucose（ 1→3,6） and mannose（1→4,6）. On an average, there are three branches among 20 residues. It is presumable that the existence of 1,3-linked Glc in the main and side chains is the main reason for its higher antitumor activity.
基金This work was supported by National Natural Science Foundation of China(51705158)the Fundamental Research Funds for the Central Universities(2018MS45)Open Funds of National Engineering Research Center of Near-Net-Shape Forming for Metallic Materials(2018005).
文摘Isogeometric analysis(IGA),an approach that integrates CAE into conventional CAD design tools,has been used in structural optimization for 10 years,with plenty of excellent research results.This paper provides a comprehensive review on isogeometric shape and topology optimization,with a brief coverage of size optimization.For isogeometric shape optimization,attention is focused on the parametrization methods,mesh updating schemes and shape sensitivity analyses.Some interesting observations,e.g.the popularity of using direct(differential)method for shape sensitivity analysis and the possibility of developing a large scale,seamlessly integrated analysis-design platform,are discussed in the framework of isogeometric shape optimization.For isogeometric topology optimization(ITO),we discuss different types of ITOs,e.g.ITO using SIMP(Solid Isotropic Material with Penalization)method,ITO using level set method,ITO using moving morphable com-ponents(MMC),ITO with phase field model,etc.,their technical details and applications such as the spline filter,multi-resolution approach,multi-material problems and stress con-strained problems.In addition to the review in the last 10 years,the current developmental trend of isogeometric structural optimization is discussed.
基金the University of Maryland for providing partial financial support for this research project
文摘This paper presents a new concept for enhancing the seismic ductility and damping capacity of diagrid structural frames by using shear-link fuse devices and its seismic performance is assessed through nonlinear static and dynamic analysis. The architectural elegancy of the diagrid structure attributed to its triangular leaning member configuration and high structural redundancy make this system a desirable choice for tall building design. However, forming a stable energy dissipation mechanism in diagrid framing remains to be investigated to expand its use in regions with high seismicity. To address this issue, a diagrid framing design is proposed here which provides a competitive design option in highly seismic regions through its increased ductility and improved energy dissipation capacity provided by replaceable shear links interconnecting the diagonal members at their ends.The structural characteristics and seismic behavior （capacity, stiffness, energy dissipation, ductility） of the diagrid structural frame are demonstrated with a 21-story building diagrid frame subjected to nonlinear static and dynamic analysis. The findings from the nonfinear time history analysis verify that satisfactory seismic performance can be achieved by the proposed diagrid frame subjected to design basis earthquakes in California. In particular, one appealing feature of the proposed diagrid building is its reduced residual displacement after strong earthquakes.
文摘A unified structural model for high-aspect-ratio composite wing with arbitrary cross-section is developed. Two types of lay-ups of the composite wing, namely, circumferentially uniform stiffness （CUS） configuration and circumferentially asymmetric stiffness （CAS） configuration, are investigated. The present structural modeling method is validated through ANSYS FEM software for the case of a composite box beam. Then, the case of a single-cell composite wing with NACA0012 airfoil shape is considered. To investigate the aeroelastic problem of high-aspect-ratio composite wings, the linear ONERA aerodynamic model is used to model the unsteady aerodynamic loads under the case of small angle of attack. Finally, flutter speeds of the high-aspect-ratio wing with various composite ply angles are determined by using U-g method.
基金Dalian Municipal Natural Science Foundation under Grant No.2019RD01。
文摘Economic losses and catastrophic casualties may occur once super high-rise structures are struck by low-probability but high-consequence scenarios of concurrent earthquakes and winds. Therefore, accurately predicting multi-hazard dynamic responses to super high-rise structures has significant engineering and scientific value. This study performed a parametric global sensitivity analysis (GSA) for multi-hazard dynamic response prediction of super high-rise structures using the multiple-degree-of-freedom shear (MFS) model. Polynomial chaos Kriging (PCK) was introduced to build a surrogate model that allowed GSA to be combined with Sobol’ indices. Monte Carlo simulation (MCS) is also conducted for the comparison to verify the accuracy and efficiency of the PCK method. Parametric sensitivity analysis is performed for a wide range of aleatory uncertainty (intensities of coupled multi-hazard), epistemic uncertainty (bending stiffness, k_(m);shear stiffness, kq;density, ρ;and damping ratio, ξ), probability distribution types, and coefficients of variation. The results indicate that epistemic uncertainty parameters, k_(m), ρ, and ξ dramatically affect the multi-hazard dynamic responses of super high-rise structures;in addition, Sobol’ indices between the normal and lognormal distributions are insignificant, while the variation levels have remarkably influenced the sensitivity indices.
文摘To evaluate the structural failure risk of the regenerative cooling thrust chamber cylinder segment,a Finite Element Method(FEM)based on experimental data was developed.The methodology was validated and utilized to reveal the thermal response and the nonlinear deformation behavior of the cylinder segment phase by phase.The conclusions of the research are as follows:The 2 D heat flux distribution caused by the injector determines the uneven temperature distribution on the gas-side wall and leads to the temperature disparity between various cooling channels;The reason for the accumulation of residual strain is that the tensile strain generated in the post-cooling phase is greater than the compressive strain produced in the hot run phase;Through the single-cycle simulation,two potential failure locations with conspicuous deformations were found,but it is difficult to determine which point is more dangerous.However,the multi-cycle thermo-structural analysis gives the evolution of the stress-strain curve and gradually discloses that the low-temperature corner of a particular channel is the most likely location to fail,rather than the maximum residual strain point of the gas-side wall.The damage analysis for dangerous point indicates that the quasistatic damage accounts for the majority of the total damage and is the main factor limiting the service life.
基金National Hi-Tech Research and Development Program of China (863 Program) (No. 2006AA04Z416)the National Natural Science Foundation of China Under Grant No. 50538020
文摘During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vibration-based health monitoring methods is to seek some damage indices that are sensitive to structural damage, This paper proposes an online structural health monitoring method for long-span suspension bridges using wavelet packet transform （WPT）. The WPT- based method is based on the energy variations of structural ambient vibration responses decomposed using wavelet packet analysis. The main feature of this method is that the proposed wavelet packet energy spectrum （WPES） has the ability to detect structural damage from ambient vibration tests of a long-span suspension bridge. As an example application, the WPES-based health monitoring system is used on the Runyang Suspension Bridge under daily environmental conditions. The analysis reveals that changes in environmental temperature have a long-term influence on the WPES, while the effect of traffic loadings on the measured WPES of the bridge presents instantaneous changes because of the nonstationary properties of the loadings. The condition indication indices VD reflect the influences of environmental temperature on the dynamic properties of the Runyang Suspension Bridge. The field tests demonstrate that the proposed WPES-based condition indication index VD is a good candidate index for health monitoring of long-span suspension bridges under ambient excitations.
基金funded by the National Natural Science Foundation of China(52478138).
文摘The connection efficiency of composite pre-tightened multi-tooth joint is low because of uneven load distribution and single load transmission path.In this paper,based on the principle of bio-tooth(suture)structure,combining soft material with fractal,a composite pre-tightened multi-hierarchy tooth joint is proposed,and the bearing performance and failure process of the joint through experiments and finite element method under tensile load.First,the ultimate bearing capacity,load distribution ratio,and failure process of different hierarchies of teeth joints are studied through experiments.Then,the progressive damage models of different hierarchies of tooth joints are established,and experiments verify the validity of the finite element model.Finally,the effects of soft material and increasing tooth hierarchy on the failure process and bearing capacity of composite pre-tightened tooth joints are analyzed by the finite element method.The following conclusions can be drawn:(1)The embedding of soft materials changed the failure process of the joint.Increasing the tooth hierarchy can give the joint more load transfer paths,but the failure process of the joint is complicated.(2)Embedding soft materials and increasing the tooth hierarchy simultaneously can effectively improve the bearing capacity of composite pre-tightened tooth joints,which is 87.8%higher than that of traditional three-tooth joints.
