Three experiments of static state storage method, low-temperature and constant-pressure storage method and low-temperature and constant-pressure storage method were carried out to investigate which method was best in ...Three experiments of static state storage method, low-temperature and constant-pressure storage method and low-temperature and constant-pressure storage method were carried out to investigate which method was best in gas hydrate. The relationships of hydrate rate, capacity and liquid temperature versus time were derived and three results were contrasted. The experimental results show lowtemperature and constant-pressure method is better than the other two methods because it's operation period is shorter and storage capacity is larger than the other two. Low-temperature and constant-pressure method is the best method. So new method will be new research objective.展开更多
The carbonate reservoirs in the Tarim Basin are characterized by low matrix-porosity,heterogeneity and anisotropy,which make it difficult to predict and evaluate these reservoirs.The reservoir formations in Lundong ar...The carbonate reservoirs in the Tarim Basin are characterized by low matrix-porosity,heterogeneity and anisotropy,which make it difficult to predict and evaluate these reservoirs.The reservoir formations in Lundong area experienced a series of diagenesis and tectonic evolution stages.And secondary storage spaces such as fractures and dissolution caves were developed while nearly all the primary pores have disappeared.Based on a summary of different types of storage spaces and their responses in conventional logs,FMI and full waveform sonic logs which are sensitive to different reservoirs,the comprehensive probability index （CPI） method is applied to evaluating the reservoirs and a standard of reservoir classification is established.By comparing the evaluation results with actual welllogging results,the method has proven to be practical for formation evaluation of carbonate reservoirs,especially for the fractured carbonate reservoirs.In reservoir fluid identification,the multivariate stepwise discriminant analysis （MSDA） method is introduced.Combining the CPI method and MSDA method,comprehensive formation evaluation has been performed for fractured and caved carbonate reservoirs in the Tarim Basin.Additionally,on the basis of secondary pore inversion results,another new method of formation evaluation is also proposed in the discussion part of this paper.Through detailed application result analysis,the method shows a promising capability for formation evaluation of complex carbonate reservoirs dominated by various secondary pores such as holes,caves,and cracks.展开更多
Piled embankments are widely used in highway and railway engineering due to their economy and efficiency inovercoming several issues encountered in constructing embankments over weak soils. Soil arching, caused by the...Piled embankments are widely used in highway and railway engineering due to their economy and efficiency inovercoming several issues encountered in constructing embankments over weak soils. Soil arching, caused by the pile-subsoilrelative displacement （△s）, plays an important role in reducing the embankment load falling on weak soil, however, the funda-mental characteristics （e.g., formation and features） of soil arching remain poorly understood. In this study, a series of discreteelement method （DEM） modellings are performed to study the formation and features of soil arching with the variation of As inpiled embankments with or without geosynthetic reinforcement. Firstly, calibration for the modelling parameters is carried out bycomparing the DEM results with the experimental data obtained from the existing literature. Secondly, the analysis of the macro-and micro-behaviours is performed in detail. Finally, a parametric study is conducted in an effort to identify the influences of threekey factors on soil arching： the friction coefficient of the embankment fill （f）, the embankment height （h）, and the pile clear spacing（s-a）. Numerical results indicate that △s is a key factor governing the formation and features of soil arching in embankments. Tobe specific, soil arching gradually evolves from two inclined shear planes at a small △s to a hemispherical arch at a relatively largeAs. Then, with a continuous increase in △s, the soil arching height gradually increases and finally approaches a constant value of0.8（s-a） （i.e., the maximum soil arching height）. For a given case, the higher the soil arching height, the greater the degree of soilarching effect. The parametric study shows that the friction coefficient of the embankment fill has a negligible influence on theformation and features of soil arching. However, embankment height is a key factor governing the formation and features of soilarching. In addition, pile clear spacing has a significant effect on the formation of soil arching, but not on its features.展开更多
Dongpu depression is a fault basin at residual-mobility period of Diwa stage, it developed on the strata of the Mesozoie and Pre-Mesozoie. It is one of the important oil/gas- bearing basin during Cenozoie era along th...Dongpu depression is a fault basin at residual-mobility period of Diwa stage, it developed on the strata of the Mesozoie and Pre-Mesozoie. It is one of the important oil/gas- bearing basin during Cenozoie era along the East China. The strueture in Dongpu geodepression is very complex. There exists a strueture pattern with east- and west-depression belts and one central swell belt, it is divided into the southern- and northern-division by Gaopingji (orMeng Ju ) -Xieheng fault.展开更多
ZosterophyUum longa sp. nov. is reported from the Lower Devonian Pingyipu Formation, Jiangyou District, northern Sichuan of China. This new plant has vertically elongate sporangia differing from all known species of Z...ZosterophyUum longa sp. nov. is reported from the Lower Devonian Pingyipu Formation, Jiangyou District, northern Sichuan of China. This new plant has vertically elongate sporangia differing from all known species of Zosterophyllum, demonstrating morphological variations in Zosterophyllophytina. New materials of Zosterophyllum yunnanicum from the Lower Devonian Xujiachong Formation, Qujing District, eastern Yunnan of China show that fertile axes of this species are anisotomous or pseudomonopodial or K-shaped in branching. Sometimes fertile lateral axes are very short and bear an axillary axis at the dividing point. Distinct thickening occurs along the whole margin of a sporangium, with sporangial lobes undeveloped. The evolution of ZosterophyUum is tentatively discussed. A biostratigraphic method of Gerrienne and Streel is introduced and applied to dating of the Lower Devonian Xujiachong Formation, which is considered as of the late Pragian-early Emsian.展开更多
The selected-state probabilities of collinear ion-pair formation process Na+I2→Na++I2-on Aten-Laming-Los two-State potential energy surface have been calculated by using LCAC-SW method. The results show that reaction...The selected-state probabilities of collinear ion-pair formation process Na+I2→Na++I2-on Aten-Laming-Los two-State potential energy surface have been calculated by using LCAC-SW method. The results show that reaction probabilities are oscillatory with collision energy; the threshold energy of this ioniZation reaction is 2.8 ev, which is in modest agreement with experimental result.展开更多
The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil a...The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.展开更多
Recently, the research of dynamics and control of the satellite formation flying has been attracting a great deal of attentions of the researchers. The theory of the research was mainly based on Clohessy-Wiltshire'...Recently, the research of dynamics and control of the satellite formation flying has been attracting a great deal of attentions of the researchers. The theory of the research was mainly based on Clohessy-Wiltshire' s (C-W's) equations, which describe the relative motion between two satellites. But according to some special examples and qualitative analysis , neither the initial parameters nor the period of the solution of C-W' s equations accord with the actual situation, and the conservation of energy is no longer held. A new method developed from orbital element description of single satellite , named relative orbital element method ( ROEM) , was introduced. This new method, with clear physics conception and wide application range, overcomes the limitation of C-W s equation , and the periodic solution is a natural conclusion. The simplified equation of the relative motion is obtained when the eccentricity of the main satellite is small. Finally, the results of the two methods (C-W' s equation and ROEM) are compared and the limitations of C-W s equations are pointed out and explained.展开更多
In this paper, we focus on circle formation control of multi-agent systems （MAS） with a leader. The circle formation is achieved based on the lead-following and the artificial potential field method. A distributed c...In this paper, we focus on circle formation control of multi-agent systems （MAS） with a leader. The circle formation is achieved based on the lead-following and the artificial potential field method. A distributed control law is given to make a group of agents form a circle and consequently achieve an expected angle. Finally, simulation results show that the proposed circle formation strategies are effective.展开更多
Production,processing and transportation of natural gases can be significantly affected by clathrate hydrates.Knowing the gas analysis is crucial to predict the right conditions for hydrate formation.Nevertheless,Katz...Production,processing and transportation of natural gases can be significantly affected by clathrate hydrates.Knowing the gas analysis is crucial to predict the right conditions for hydrate formation.Nevertheless,Katz gas gravity method can be used for initial estimation of hydrate formation temperature （HFT） under the circumstances of indeterminate gas composition.So far several correlations have been proposed for gas gravity method,in which the most accurate and reliable one has belonged to Bahadori and Vuthaluru.The main objective of this study is to present a simple and yet accurate correlation for fast prediction of sweet natural gases HFT based on the fit to Katz gravity chart.By reviewing the error analysis results,one can discover that the new proposed correlation has the best estimation capability among the widely accepted existing correlations within the investigated range.展开更多
A simple technique for preparing cauliflower-like PMMA particles by a self-formation method is proposed. PMMA particles can be obtained with tunable surface morphology by varying the polymerization time. Experimental ...A simple technique for preparing cauliflower-like PMMA particles by a self-formation method is proposed. PMMA particles can be obtained with tunable surface morphology by varying the polymerization time. Experimental results show that the formation of these cauliflower-like particles can be attributed to the special particle growth mechanism in the self-formation method.展开更多
This study proposed the newly-designed Pelagic and demersal trawls for the fishing vessels operating in Cameroonian waters in pelagic and demersal fishing grounds. The engineering performances of both trawls were inve...This study proposed the newly-designed Pelagic and demersal trawls for the fishing vessels operating in Cameroonian waters in pelagic and demersal fishing grounds. The engineering performances of both trawls were investigated using physical modelling method and analytical method based on the predicted equations. In a flume tank, a series of physical model tests based on Tauti’s law were performed to investigate the hydrodynamic and geometrical performances of both trawls and to assess the applicability of the analytical methods based on predicted equations. The results showed that in model scale, the working towing speed and door spread for the pelagic trawl were 3.5 knots and 1.85 m, respectively, and for the bottom trawl net they were 4.0 knots and 1.8 m. At that speed and door spread, the drag force, net opening height, and wing-end spread of the pelagic model trawl were 36.73 N, 0.89 m, and 0.86 m, respectively, and the swept area was 0.76 m<sup>2</sup>. Bottom trawl speed and door spread were 30.43 N, 0.38 m, and 0.45 m, respectively, and the swept area was 0.25 m<sup>2</sup>. The maximum difference between the experimental and analytical results of hydrodynamic performances was less than 56.22% and 41.45%, respectively, for pelagic and bottom trawls, the results of the geometrical performances obtained using predicted equations were close to the experimental results in the flume tank with a maximum relative error less than 12.85%. The newly developed pelagic and bottom trawls had advanced engineering performance for high catch efficiency and selectivity and could be used in commercial fishing operations in Cameroonian waters.展开更多
Nowadays,the novel oil water interface method has attracted a considerable attention owing to the advantages of mild reaction conditions,simple operation,low cost,and high efficiency.In this paper,uniform oil-soluble ...Nowadays,the novel oil water interface method has attracted a considerable attention owing to the advantages of mild reaction conditions,simple operation,low cost,and high efficiency.In this paper,uniform oil-soluble Fe_3O_4 nanoparticles(NPs) were synthesized by oil-water interface method from mixing iron tristearate of 0.067mol/L in cyclohexane with ferrous sulfate in water.The as-prepared products were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),vibrating sample magnetometer(VSM),Fourier transform infrared spectroscopy(FT-IR) and thermogravimetric analyzer(TGA).TEM images and XRD profiles showed that the size of the oil-soluble products ranged in 1.7-6.9 nm.VSM indicated that the Fe_3O_4 NPs were superparamagetic.FT-IR and TGA proved that oleic acid was combined to the surface of Fe_3O_4 NPs closely.TEM images and XRD profiles revealed that the most suitable reaction concentration of NH_3·H_2O,oleic acid/water in volume,reaction temperature and reaction time were 4.5 mol/L,50:1 000,80℃ and 6 h,respectively.The formation mechanism of the nearly monodispersed Fe_3O_4 NPs was that the preformed Fe_3O_4 nuclei were capped by oleic acid as early as the nucleation occurred in oil-water interface and subsequently entered into oil phase to stop growing.展开更多
This study shows the results of mapping numerous cavities and distress which appeared and detected in Qassim area, Saudi Arabia. This phenomenon was observed near a school building and residential area and became a se...This study shows the results of mapping numerous cavities and distress which appeared and detected in Qassim area, Saudi Arabia. This phenomenon was observed near a school building and residential area and became a serious risk to occupants and residents. The survey was carried out applying geotechnical techniques which included advancing rotary boreholes to depths of 23 m to 30 m with sampling and testing. The evaluation process also included resistivity imaging profiles using 2D electrical resistivity measurements. Results obtained from this research showed a thick top layer of silty clayey sand soil rich of gypsum and carbonate presenting a hazardous and high-risk soil type. The percentage of fines that are likely to be washed out as a result of chemical disintegration and exposure to significant hydraulic gradient was of great concern. Assessment was made using combined geotechnical and geophysical approach in addition to chemical tests. Based on the data collected and analysis of test results a practical solution was suggested to solve this problem. The use of “cut-off wall” in order to reduce the level of subsurface scour and cajuvity formation were found appropriate. The depth of the cut off wall was determined based on the subsurface geological profile. Advantages of this approach and concerns need to be considered in adopting typical solutions that are presented.展开更多
For at least the past five decades,structural synthesis has been used as a main means of finding better mechanisms with some predefined function.In structural synthesis,isomorphism identification is still a problem un...For at least the past five decades,structural synthesis has been used as a main means of finding better mechanisms with some predefined function.In structural synthesis,isomorphism identification is still a problem unsolved well,and to solve this problem is very significant to the design of new mechanisms.According to the given degree of freedom（DOF） and link connection property of planar closed chain mechanisms,vertex assortment is obtained.For solving the isomorphism problem,a method of the adding sub-chains is proposed with the detailed steps and algorithms in the synthesizing process.Employing this method,the identification code and formation code of every topological structure are achieved,therefore many isomorphic structures could be eliminated in time during structural synthesis by comparing those codes among different topological graphs,resulting in the improvement of synthesizing efficiency and accuracy,and the approach for eliminating rigid sub-chains in and after the synthesizing process is also presented.Some examples are given,including how to add sub-chains,how to detect simple rigid sub-chains and how to obtain identification codes and formulation codes et al.Using the adding sub-chain method,the relative information of some common topological graphs is given in the form of table.The comparison result is coincident with many literatures,so the correctness of the adding sub-chain method is convinced.This method will greatly improve the synthesizing efficiency and accuracy,and has a good potential for application.展开更多
基金supported by the National Natural Science Foundation of China(No.50176051)the State Key Development Program for Basic Research of China(No.2000026306).
文摘Three experiments of static state storage method, low-temperature and constant-pressure storage method and low-temperature and constant-pressure storage method were carried out to investigate which method was best in gas hydrate. The relationships of hydrate rate, capacity and liquid temperature versus time were derived and three results were contrasted. The experimental results show lowtemperature and constant-pressure method is better than the other two methods because it's operation period is shorter and storage capacity is larger than the other two. Low-temperature and constant-pressure method is the best method. So new method will be new research objective.
基金co-supported by the National Basic Research Program of China(Grant No.2011CB201103)the National Science and Technology Major Project(GrantNo.2011ZX05004003)
文摘The carbonate reservoirs in the Tarim Basin are characterized by low matrix-porosity,heterogeneity and anisotropy,which make it difficult to predict and evaluate these reservoirs.The reservoir formations in Lundong area experienced a series of diagenesis and tectonic evolution stages.And secondary storage spaces such as fractures and dissolution caves were developed while nearly all the primary pores have disappeared.Based on a summary of different types of storage spaces and their responses in conventional logs,FMI and full waveform sonic logs which are sensitive to different reservoirs,the comprehensive probability index （CPI） method is applied to evaluating the reservoirs and a standard of reservoir classification is established.By comparing the evaluation results with actual welllogging results,the method has proven to be practical for formation evaluation of carbonate reservoirs,especially for the fractured carbonate reservoirs.In reservoir fluid identification,the multivariate stepwise discriminant analysis （MSDA） method is introduced.Combining the CPI method and MSDA method,comprehensive formation evaluation has been performed for fractured and caved carbonate reservoirs in the Tarim Basin.Additionally,on the basis of secondary pore inversion results,another new method of formation evaluation is also proposed in the discussion part of this paper.Through detailed application result analysis,the method shows a promising capability for formation evaluation of complex carbonate reservoirs dominated by various secondary pores such as holes,caves,and cracks.
基金supported by the National Key Research and Development Program of China(2016YFC0800208)the National Natural Science Foundation of China(Nos.51278216,51478201,51308241,and 51608316)
文摘Piled embankments are widely used in highway and railway engineering due to their economy and efficiency inovercoming several issues encountered in constructing embankments over weak soils. Soil arching, caused by the pile-subsoilrelative displacement （△s）, plays an important role in reducing the embankment load falling on weak soil, however, the funda-mental characteristics （e.g., formation and features） of soil arching remain poorly understood. In this study, a series of discreteelement method （DEM） modellings are performed to study the formation and features of soil arching with the variation of As inpiled embankments with or without geosynthetic reinforcement. Firstly, calibration for the modelling parameters is carried out bycomparing the DEM results with the experimental data obtained from the existing literature. Secondly, the analysis of the macro-and micro-behaviours is performed in detail. Finally, a parametric study is conducted in an effort to identify the influences of threekey factors on soil arching： the friction coefficient of the embankment fill （f）, the embankment height （h）, and the pile clear spacing（s-a）. Numerical results indicate that △s is a key factor governing the formation and features of soil arching in embankments. Tobe specific, soil arching gradually evolves from two inclined shear planes at a small △s to a hemispherical arch at a relatively largeAs. Then, with a continuous increase in △s, the soil arching height gradually increases and finally approaches a constant value of0.8（s-a） （i.e., the maximum soil arching height）. For a given case, the higher the soil arching height, the greater the degree of soilarching effect. The parametric study shows that the friction coefficient of the embankment fill has a negligible influence on theformation and features of soil arching. However, embankment height is a key factor governing the formation and features of soilarching. In addition, pile clear spacing has a significant effect on the formation of soil arching, but not on its features.
文摘Dongpu depression is a fault basin at residual-mobility period of Diwa stage, it developed on the strata of the Mesozoie and Pre-Mesozoie. It is one of the important oil/gas- bearing basin during Cenozoie era along the East China. The strueture in Dongpu geodepression is very complex. There exists a strueture pattern with east- and west-depression belts and one central swell belt, it is divided into the southern- and northern-division by Gaopingji (orMeng Ju ) -Xieheng fault.
基金Acknowledgements This study is supported by the National Natural Science Foundation of China （grants 40302001 and 40232019） a foundation for the Author of National Excellent Doctoral Dissertation of China （200429）.
文摘ZosterophyUum longa sp. nov. is reported from the Lower Devonian Pingyipu Formation, Jiangyou District, northern Sichuan of China. This new plant has vertically elongate sporangia differing from all known species of Zosterophyllum, demonstrating morphological variations in Zosterophyllophytina. New materials of Zosterophyllum yunnanicum from the Lower Devonian Xujiachong Formation, Qujing District, eastern Yunnan of China show that fertile axes of this species are anisotomous or pseudomonopodial or K-shaped in branching. Sometimes fertile lateral axes are very short and bear an axillary axis at the dividing point. Distinct thickening occurs along the whole margin of a sporangium, with sporangial lobes undeveloped. The evolution of ZosterophyUum is tentatively discussed. A biostratigraphic method of Gerrienne and Streel is introduced and applied to dating of the Lower Devonian Xujiachong Formation, which is considered as of the late Pragian-early Emsian.
文摘The selected-state probabilities of collinear ion-pair formation process Na+I2→Na++I2-on Aten-Laming-Los two-State potential energy surface have been calculated by using LCAC-SW method. The results show that reaction probabilities are oscillatory with collision energy; the threshold energy of this ioniZation reaction is 2.8 ev, which is in modest agreement with experimental result.
文摘The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.
基金Foundation items: the National Natural Science Foundation of China (10202008) the Post Doctoral Science Foundation of China ((2001)31)
文摘Recently, the research of dynamics and control of the satellite formation flying has been attracting a great deal of attentions of the researchers. The theory of the research was mainly based on Clohessy-Wiltshire' s (C-W's) equations, which describe the relative motion between two satellites. But according to some special examples and qualitative analysis , neither the initial parameters nor the period of the solution of C-W' s equations accord with the actual situation, and the conservation of energy is no longer held. A new method developed from orbital element description of single satellite , named relative orbital element method ( ROEM) , was introduced. This new method, with clear physics conception and wide application range, overcomes the limitation of C-W s equation , and the periodic solution is a natural conclusion. The simplified equation of the relative motion is obtained when the eccentricity of the main satellite is small. Finally, the results of the two methods (C-W' s equation and ROEM) are compared and the limitations of C-W s equations are pointed out and explained.
基金supported by the National Natural Science Foundation of China(No.61233002)the Fundamental Research Funds for the Central Universities(No.N120404019)
文摘In this paper, we focus on circle formation control of multi-agent systems （MAS） with a leader. The circle formation is achieved based on the lead-following and the artificial potential field method. A distributed control law is given to make a group of agents form a circle and consequently achieve an expected angle. Finally, simulation results show that the proposed circle formation strategies are effective.
文摘Production,processing and transportation of natural gases can be significantly affected by clathrate hydrates.Knowing the gas analysis is crucial to predict the right conditions for hydrate formation.Nevertheless,Katz gas gravity method can be used for initial estimation of hydrate formation temperature （HFT） under the circumstances of indeterminate gas composition.So far several correlations have been proposed for gas gravity method,in which the most accurate and reliable one has belonged to Bahadori and Vuthaluru.The main objective of this study is to present a simple and yet accurate correlation for fast prediction of sweet natural gases HFT based on the fit to Katz gravity chart.By reviewing the error analysis results,one can discover that the new proposed correlation has the best estimation capability among the widely accepted existing correlations within the investigated range.
基金This project was supported by the National Nature Science Foundation of China (Nos. 20204018 and 20374058).
文摘A simple technique for preparing cauliflower-like PMMA particles by a self-formation method is proposed. PMMA particles can be obtained with tunable surface morphology by varying the polymerization time. Experimental results show that the formation of these cauliflower-like particles can be attributed to the special particle growth mechanism in the self-formation method.
文摘This study proposed the newly-designed Pelagic and demersal trawls for the fishing vessels operating in Cameroonian waters in pelagic and demersal fishing grounds. The engineering performances of both trawls were investigated using physical modelling method and analytical method based on the predicted equations. In a flume tank, a series of physical model tests based on Tauti’s law were performed to investigate the hydrodynamic and geometrical performances of both trawls and to assess the applicability of the analytical methods based on predicted equations. The results showed that in model scale, the working towing speed and door spread for the pelagic trawl were 3.5 knots and 1.85 m, respectively, and for the bottom trawl net they were 4.0 knots and 1.8 m. At that speed and door spread, the drag force, net opening height, and wing-end spread of the pelagic model trawl were 36.73 N, 0.89 m, and 0.86 m, respectively, and the swept area was 0.76 m<sup>2</sup>. Bottom trawl speed and door spread were 30.43 N, 0.38 m, and 0.45 m, respectively, and the swept area was 0.25 m<sup>2</sup>. The maximum difference between the experimental and analytical results of hydrodynamic performances was less than 56.22% and 41.45%, respectively, for pelagic and bottom trawls, the results of the geometrical performances obtained using predicted equations were close to the experimental results in the flume tank with a maximum relative error less than 12.85%. The newly developed pelagic and bottom trawls had advanced engineering performance for high catch efficiency and selectivity and could be used in commercial fishing operations in Cameroonian waters.
基金Nanometer Special Project of Shanghai,China(No.1052nm06400)
文摘Nowadays,the novel oil water interface method has attracted a considerable attention owing to the advantages of mild reaction conditions,simple operation,low cost,and high efficiency.In this paper,uniform oil-soluble Fe_3O_4 nanoparticles(NPs) were synthesized by oil-water interface method from mixing iron tristearate of 0.067mol/L in cyclohexane with ferrous sulfate in water.The as-prepared products were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),vibrating sample magnetometer(VSM),Fourier transform infrared spectroscopy(FT-IR) and thermogravimetric analyzer(TGA).TEM images and XRD profiles showed that the size of the oil-soluble products ranged in 1.7-6.9 nm.VSM indicated that the Fe_3O_4 NPs were superparamagetic.FT-IR and TGA proved that oleic acid was combined to the surface of Fe_3O_4 NPs closely.TEM images and XRD profiles revealed that the most suitable reaction concentration of NH_3·H_2O,oleic acid/water in volume,reaction temperature and reaction time were 4.5 mol/L,50:1 000,80℃ and 6 h,respectively.The formation mechanism of the nearly monodispersed Fe_3O_4 NPs was that the preformed Fe_3O_4 nuclei were capped by oleic acid as early as the nucleation occurred in oil-water interface and subsequently entered into oil phase to stop growing.
文摘This study shows the results of mapping numerous cavities and distress which appeared and detected in Qassim area, Saudi Arabia. This phenomenon was observed near a school building and residential area and became a serious risk to occupants and residents. The survey was carried out applying geotechnical techniques which included advancing rotary boreholes to depths of 23 m to 30 m with sampling and testing. The evaluation process also included resistivity imaging profiles using 2D electrical resistivity measurements. Results obtained from this research showed a thick top layer of silty clayey sand soil rich of gypsum and carbonate presenting a hazardous and high-risk soil type. The percentage of fines that are likely to be washed out as a result of chemical disintegration and exposure to significant hydraulic gradient was of great concern. Assessment was made using combined geotechnical and geophysical approach in addition to chemical tests. Based on the data collected and analysis of test results a practical solution was suggested to solve this problem. The use of “cut-off wall” in order to reduce the level of subsurface scour and cajuvity formation were found appropriate. The depth of the cut off wall was determined based on the subsurface geological profile. Advantages of this approach and concerns need to be considered in adopting typical solutions that are presented.
基金supported by National Natural Science Foundation of China (Grant No. 51075079)National Hi-tech Research and Development Program of China(863 Program,Grant No. 2008AA04Z202)
文摘For at least the past five decades,structural synthesis has been used as a main means of finding better mechanisms with some predefined function.In structural synthesis,isomorphism identification is still a problem unsolved well,and to solve this problem is very significant to the design of new mechanisms.According to the given degree of freedom（DOF） and link connection property of planar closed chain mechanisms,vertex assortment is obtained.For solving the isomorphism problem,a method of the adding sub-chains is proposed with the detailed steps and algorithms in the synthesizing process.Employing this method,the identification code and formation code of every topological structure are achieved,therefore many isomorphic structures could be eliminated in time during structural synthesis by comparing those codes among different topological graphs,resulting in the improvement of synthesizing efficiency and accuracy,and the approach for eliminating rigid sub-chains in and after the synthesizing process is also presented.Some examples are given,including how to add sub-chains,how to detect simple rigid sub-chains and how to obtain identification codes and formulation codes et al.Using the adding sub-chain method,the relative information of some common topological graphs is given in the form of table.The comparison result is coincident with many literatures,so the correctness of the adding sub-chain method is convinced.This method will greatly improve the synthesizing efficiency and accuracy,and has a good potential for application.
