Slip-form system constitutes the latest technology for the erection of elevated concrete pylons. This paper investigates the design of slip-form system applying BIM technology for the efficient development of the slip...Slip-form system constitutes the latest technology for the erection of elevated concrete pylons. This paper investigates the design of slip-form system applying BIM technology for the efficient development of the slip-form system. The considered pylon has a height of 10 m and presents the rectangular hollow section generally adopted in cable-supported bridges. The slip-form was thus designed to accommodate the tapered cross-section and changing thickness considering the continuous placing of concrete. In addition, the safety of the system was examined with regard to the various loads applied on the slip form along the construction. The design results could be verified visually through BIM and the applicability of the designed slip-form was validated in advance through virtual assembly and construction.展开更多
Most material distribution-based topology optimization methods work on a relaxed form of the optimization problem and then push the solution toward the binary limits.However,when benchmarking these methods,researchers...Most material distribution-based topology optimization methods work on a relaxed form of the optimization problem and then push the solution toward the binary limits.However,when benchmarking these methods,researchers use known solutions to only a single form of benchmark problem.This paper proposes a comparison platform for systematic benchmarking of topology optimization methods using both binary and relaxed forms.A greyness measure is implemented to evaluate how far a solution is from the desired binary form.The well-known ZhouRozvany(ZR)problem is selected as the benchmarking problem here,making use of available global solutions for both its relaxed and binary forms.The recently developed non-penalization Smooth-edged Material Distribution for Optimizing Topology(SEMDOT),well-established Solid Isotropic Material with Penalization(SIMP),and continuation methods are studied on this platform.Interestingly,in most cases,the grayscale solutions obtained by SEMDOT demonstrate better performance in dealing with the ZR problem than SIMP.The reasons are investigated and attributed to the usage of two different regularization techniques,namely,the Heaviside smooth function in SEMDOT and the power-law penalty in SIMP.More importantly,a simple-to-use benchmarking graph is proposed for evaluating newly developed topology optimization methods.展开更多
Tailings produced by mining and ore smelting are a major source of soil pollution.Understanding the speciation of heavy metals(HMs)in tailings is essential for soil remediation and sustainable development.Given the co...Tailings produced by mining and ore smelting are a major source of soil pollution.Understanding the speciation of heavy metals(HMs)in tailings is essential for soil remediation and sustainable development.Given the complex and time-consuming nature of traditional sequential laboratory extraction methods for determining the forms of HMs in tailings,a rapid and precise identification approach is urgently required.To address this issue,a general empirical prediction method for HM occurrence was developed using machine learning(ML).The compositional information of the tailings,properties of the HMs,and sequential extraction steps were used as inputs to calculate the percentages of the seven forms of HMs.After the models were tuned and compared,extreme gradient boosting,gradient boosting decision tree,and categorical boosting methods were found to be the top three performing ML models,with the coefficient of determination(R^(2))values on the testing set exceeding 0.859.Feature importance analysis for these three optimal models indicated that electronegativity was the most important factor affecting the occurrence of HMs,with an average feature importance of 0.4522.The subsequent use of stacking as a model integration method enabled the ability of the ML models to predict HM occurrence forms to be further improved,and resulting in an increase of R^(2) to 0.879.Overall,this study developed a robust technique for predicting the occurrence forms in tailings and provides an important reference for the environmental assessment and recycling of tailings.展开更多
Theoretical education and practical education are very important in clinical laboratory teaching.The teaching evaluation system is one of the important means to test the quality of course teaching.The traditional summ...Theoretical education and practical education are very important in clinical laboratory teaching.The teaching evaluation system is one of the important means to test the quality of course teaching.The traditional summative evaluation needs to be improved in terms of scientificity and impartiality,and its guiding effect on teaching reform is limited.Therefore,this paper proposes to apply formative evaluation to clinical laboratory teaching to remobilize students'learning enthusiasm and provide valuable guidance for the subsequent teaching reform,hoping to achieve the purpose of improving the quality of laboratory teaching.展开更多
Economic globalization is a process of forming a global market under the conditions of technological progress and national opening-up.Influenced by factors such as national policies,the international environment and g...Economic globalization is a process of forming a global market under the conditions of technological progress and national opening-up.Influenced by factors such as national policies,the international environment and geopolitics,the values,concepts and choices of the participants of globalization will change accordingly,thus affecting the mode,scale and speed of globalization.展开更多
Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles a...Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles appeared at the bottom of the part during single-step forming,but no wrinkles were observed during double-step forming.The thinning rate and deviation of the wall thickness of the part in each area were less than 20%and 2.7 mm,correspondingly,and the drawing depth of the part reached 45.8 mm.The effect of double-step forming was better than that of single-step forming,which was related to the IHF forming law.Besides,the characteristics of the IHF process were studied by numerical simulation.The results indicated that when double-step forming was utilized,there was almost no velocity field in the opposite direction of deformation after the bottom of the part contacted the die,and the existence of stress state at the bottom would restrain and eliminate the wrinkles.The inertia effect evolved with the driving pressure.Specially,the inertia effect can improve the flow of metal and reduce the deviation of the wall thickness of the part under double-step forming.展开更多
The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and redu...The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.展开更多
In this paper,we studyλ-biharmonic hypersurfaces M_(r)^(5) of 6-dimensional pseudo Riemannian space form N_(p)^(6)(c)with the indexs 0≤p≤6,r=p−1 or p,and constant curvature c.It was proved that if the shape operato...In this paper,we studyλ-biharmonic hypersurfaces M_(r)^(5) of 6-dimensional pseudo Riemannian space form N_(p)^(6)(c)with the indexs 0≤p≤6,r=p−1 or p,and constant curvature c.It was proved that if the shape operator of M_(r)^(5) is diagonalizable,then the mean curvature is a constant.As an application,we find some types of biharmonic hypersurfaces of N_(p)^(6)(c)are minimal.展开更多
In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
In aerospace,nuclear power,and new energy vehicles industries,utilizing integrated metal components with extreme sizes and/or structures is crucial for achieving significant weight-saving,performance-improvement,and e...In aerospace,nuclear power,and new energy vehicles industries,utilizing integrated metal components with extreme sizes and/or structures is crucial for achieving significant weight-saving,performance-improvement,and excellent reliability.These components,made from metal sheets,rings,or tubes,exhibit characteristics like ultra-thin,ultra-thick,ultra-large,ultra-long,ultra-high ribs,and large variable diameters.During plastic de-formation in metal forming processes,defects such as ruptures,wrinkles,excessive strain differences,and un-expected weak performance areas are likely to occur due to the intersection of multiple effects in different research disciplines,including materials science,processes,and mechanics of materials.Consequently,the smooth forming of integrated parts is difficult.It is the first time to review,summarize,and analyze the ad-vancement of forming methods for producing integrated parts with extreme sizes and structures.The general academic ideas to change the process conditions and sequences to optimize stress state and improve plastic deformation ability for forming the components with extreme sizes/structures are introduced.Practical ex-amples,discussed in detail in the paper,include the forming of(i)integrated ultra-thin and ultra-thick sheet components;(ii)integrated ultra-large size ring components with thin wall and high ribs;and(iii)integrated ultra-long tube components with large perimeter difference.Various plasticity technologies and process se-quences have been developed.The key processes and applications of the technologies are discussed in detail,which achieve successful plastic forming of integrated components.This paper provides state-of-the-art and perspectives for the rapidly advancing material forming fields of key metal components for the next generation of equipment.展开更多
To study a form invariance of Lagrange system, the form invariance of Lagrange equations under the infinitesimal transformations was used. The definition and criterion for the form invariance are given. The relati...To study a form invariance of Lagrange system, the form invariance of Lagrange equations under the infinitesimal transformations was used. The definition and criterion for the form invariance are given. The relation between the form invariance and the Noether symmetry was established.展开更多
The form invariance of Birkhoffian systems is a kind of invariance of the Birkhoffian equations under the infinitesimal transformations. The definition and criteria of the form invariance are given, and the relation b...The form invariance of Birkhoffian systems is a kind of invariance of the Birkhoffian equations under the infinitesimal transformations. The definition and criteria of the form invariance are given, and the relation between the form invariance and the Noether symmetry is studied.展开更多
A formula was proposed to calculate the distribution of metal ions quantitatively in chemical reaction system forming hydroxide where precipitation and complex are formed together. The effects of some factors on forma...A formula was proposed to calculate the distribution of metal ions quantitatively in chemical reaction system forming hydroxide where precipitation and complex are formed together. The effects of some factors on formation of precipitation and complex were investigated, and the corresponding precipitation rates of zinc, iron （III）, aluminum, copper and magnesium were calculated. As a result, it shows that the proposed formula is reliable. By the proposed formula, the existence state of metal ions in hydroxides reaction system with any metal ions can be well described and the effects of some factors on the distribution of metal ions were determined.展开更多
An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, clo...An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.展开更多
Changes of soil organic nitrogen forms and soil nitrogen supply under continuous rice cropping system were investigated in a long-term fertilization experiment in Jinhua, Zhejiang Province, China. The fertilizer treat...Changes of soil organic nitrogen forms and soil nitrogen supply under continuous rice cropping system were investigated in a long-term fertilization experiment in Jinhua, Zhejiang Province, China. The fertilizer treatments included combination of P-K, N-K, N-P, and N-P-K as well as the control. After six years of continuous double-rice cropping, total soil N and hydrolysable N contents remained stable in plots with N treatments, while the hydrolysable N contents were substantially reduced in those plots without N application. Compared to the unbalanced fertilization treatments, P and K increased the percentage of hydrolysable ammonium N in the total soil N with the balanced application of N, and also maintained higher rice grain yields and nitrogen uptake. Grain yield was positively correlated with total N uptake (r = 0.875**), hydrolysable N (r = 0.608**), hydrolysable ammonium N (r = 0.560**) and the hydrolysable unknown N (r = 0.417**). Total N uptake was positively correlated with hydrolysable N (r = 0.608**), hydrolysable ammonium N (r = 0.440**) and hydrolysable unknown N (r = 0.431**). Soil nutrient depletion and/or unbalanced fertilization to rice crop reduced N content in soil microbial biomass, and therefore increased C/N ratio, suggesting a negative effect on the total microbial biomass in the soil.展开更多
In this article, the Killing form of a Lie supertriple system （LSTS） and that of its imbedding Lie superalgebra （LSA） are investigated, and a unique decomposition theorem for a quasiclassical LSTS with trivial cen...In this article, the Killing form of a Lie supertriple system （LSTS） and that of its imbedding Lie superalgebra （LSA） are investigated, and a unique decomposition theorem for a quasiclassical LSTS with trivial center is established by means of the parallel decomposition theorem for a quasiclassical LSA.展开更多
Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the ...Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system’s ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier.Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance.For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance.In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions) along with their evaluation parameters have also been reviewed.展开更多
The present study was conducted in the alpine pastures of Tungnath （30° 14＇ N and 79° 13＇ E） to observe life-form and growth-form patterns of alpine plant species under grazed and ungrazed conditions and...The present study was conducted in the alpine pastures of Tungnath （30° 14＇ N and 79° 13＇ E） to observe life-form and growth-form patterns of alpine plant species under grazed and ungrazed conditions and to work out the plant life form spectrum. Species were categorized as plant habit, height and length of growth-cycle and life-form classes according to Raunkiaer＇s system. The results show that in total of 68 species at grazed site, hemicryptophytes （He） accounted for 50.00% species, followed by cryptophytes （26.47%）, chamaephytes （16.18%）, phanemphytes （4.41%） and therophytes （2.94%）. At the ungrazed site in 65 plant species, hemicryptophytes （He） accounted fo＇r 49.23% species, cryptophytes （26.15%）, chamaephytes （15.38%）, phanerophytes （6.15%） and ther6phytes （3.08 % species）. In general, hemicrptophyte are dominant^in both sites i.e. graged and ungrazed. Growth form categories were classified as forbs, shrubs, grasses and sedges＇and undershrubs, according to plant habit and height. On the basis of length of the growth cycle, species were categorized as plant species of short growth cycle, intermediate growth cycle and long growth cycle. The short forbs of plant habit and height, had the highest emergence, and grasses and sedges had the lowest emergence in representative species. Percentage of species with long growth cycle was highest in both sites.展开更多
The aim of this work is to simulate thermal deformation of tool system and investigate the influence of cutting parameters on it in single-point diamond turning(SPDT) of aluminum alloy. The experiments with various cu...The aim of this work is to simulate thermal deformation of tool system and investigate the influence of cutting parameters on it in single-point diamond turning(SPDT) of aluminum alloy. The experiments with various cutting parameters were conducted. Cutting temperature was measured by FLIR A315 infrared thermal imager. Tool wear was measured by scanning electron microscope(SEM). The numerical model of heat flux considering tool wear generated in cutting zone was established. Then two-step finite element method(FEM) simulations matching the experimental conditions were carried out to simulate the thermal deformation. In addition, the tests of deformation of tool system were performed to verify previous simulation results. And then the influence of cutting parameters on thermal deformation was investigated. The results show that the temperature and thermal deformation from simulations agree well with the results from experiments in the same conditions. The maximum thermal deformation of tool reaches to 7 μm. The average flank wear width and cutting speed are the dominant factors affecting thermal deformation, and the effective way to decrease the thermal deformation of tool is to control the tool wear and the cutting speed.展开更多
A method based on the semi-empirical Miedema model and a geometrical model was used to study the glass forming abili-ties （GFA） and the amorphous forming ranges of Al-Fe-Nd-Zr system and its constituent ternary syst...A method based on the semi-empirical Miedema model and a geometrical model was used to study the glass forming abili-ties （GFA） and the amorphous forming ranges of Al-Fe-Nd-Zr system and its constituent ternary systems. The amorphous forming composition ranges were analyzed based on different criteria such asΔGam-ss and PHSS （PHSS=ΔHchem （ΔSC/R）（ΔSσ/R）） for Al-Fe-Nd system. The predicted amorphous forming range was in good agreement with the experimental results. The results showed that the criterion ofΔGam-ss was more accurate, and agreed well with the experiment results. The Gibbs free energy differenceΔGam-ss and pa-rameter PHSS were then used to predict the amorphous forming composition range for the rest of the constitutive ternary systems of Al-Fe-Nd-Zr. In addition, the amorphous forming composition ranges of the （Al-Fe-Zr）100-xNdx （x=50, 60, 70） systems were predicted byΔGam-ss and the modified parameter PHSS. The Gibbs free energy of Al10（Fe1-xZrx）30Nd60 were also calculated. The GFA parameter PHSS indicated that the composition with the highest GFA was Al33.5Fe13.5Zr3Nd50 for the （Al-Fe-Zr）50Nd50 system, Al28.8Fe10Zr1.2Nd60 for the （Al-Fe-Zr）40Nd60 system and Al22.8Fe6.9Zr0.3Nd70 for the （Al-Fe-Zr）30Nd70 system, and the results suggested that those alloys with high content of Al had higher GFA. The appropriate content of neodymium and zirconium resulted in the lower value of PHSS and increased the GFA obviously.展开更多
文摘Slip-form system constitutes the latest technology for the erection of elevated concrete pylons. This paper investigates the design of slip-form system applying BIM technology for the efficient development of the slip-form system. The considered pylon has a height of 10 m and presents the rectangular hollow section generally adopted in cable-supported bridges. The slip-form was thus designed to accommodate the tapered cross-section and changing thickness considering the continuous placing of concrete. In addition, the safety of the system was examined with regard to the various loads applied on the slip form along the construction. The design results could be verified visually through BIM and the applicability of the designed slip-form was validated in advance through virtual assembly and construction.
文摘Most material distribution-based topology optimization methods work on a relaxed form of the optimization problem and then push the solution toward the binary limits.However,when benchmarking these methods,researchers use known solutions to only a single form of benchmark problem.This paper proposes a comparison platform for systematic benchmarking of topology optimization methods using both binary and relaxed forms.A greyness measure is implemented to evaluate how far a solution is from the desired binary form.The well-known ZhouRozvany(ZR)problem is selected as the benchmarking problem here,making use of available global solutions for both its relaxed and binary forms.The recently developed non-penalization Smooth-edged Material Distribution for Optimizing Topology(SEMDOT),well-established Solid Isotropic Material with Penalization(SIMP),and continuation methods are studied on this platform.Interestingly,in most cases,the grayscale solutions obtained by SEMDOT demonstrate better performance in dealing with the ZR problem than SIMP.The reasons are investigated and attributed to the usage of two different regularization techniques,namely,the Heaviside smooth function in SEMDOT and the power-law penalty in SIMP.More importantly,a simple-to-use benchmarking graph is proposed for evaluating newly developed topology optimization methods.
基金financially supported by the Natural Science Foundation of Hunan Province,China(No.2024JJ2074)the National Natural Science Foundation of China(No.22376221)the Young Elite Scientists Sponsorship Program by CAST,China(No.2023QNRC001).
文摘Tailings produced by mining and ore smelting are a major source of soil pollution.Understanding the speciation of heavy metals(HMs)in tailings is essential for soil remediation and sustainable development.Given the complex and time-consuming nature of traditional sequential laboratory extraction methods for determining the forms of HMs in tailings,a rapid and precise identification approach is urgently required.To address this issue,a general empirical prediction method for HM occurrence was developed using machine learning(ML).The compositional information of the tailings,properties of the HMs,and sequential extraction steps were used as inputs to calculate the percentages of the seven forms of HMs.After the models were tuned and compared,extreme gradient boosting,gradient boosting decision tree,and categorical boosting methods were found to be the top three performing ML models,with the coefficient of determination(R^(2))values on the testing set exceeding 0.859.Feature importance analysis for these three optimal models indicated that electronegativity was the most important factor affecting the occurrence of HMs,with an average feature importance of 0.4522.The subsequent use of stacking as a model integration method enabled the ability of the ML models to predict HM occurrence forms to be further improved,and resulting in an increase of R^(2) to 0.879.Overall,this study developed a robust technique for predicting the occurrence forms in tailings and provides an important reference for the environmental assessment and recycling of tailings.
文摘Theoretical education and practical education are very important in clinical laboratory teaching.The teaching evaluation system is one of the important means to test the quality of course teaching.The traditional summative evaluation needs to be improved in terms of scientificity and impartiality,and its guiding effect on teaching reform is limited.Therefore,this paper proposes to apply formative evaluation to clinical laboratory teaching to remobilize students'learning enthusiasm and provide valuable guidance for the subsequent teaching reform,hoping to achieve the purpose of improving the quality of laboratory teaching.
文摘Economic globalization is a process of forming a global market under the conditions of technological progress and national opening-up.Influenced by factors such as national policies,the international environment and geopolitics,the values,concepts and choices of the participants of globalization will change accordingly,thus affecting the mode,scale and speed of globalization.
基金financially supported by the National Key R&D Program of China(No.2024YFE0108800/T24KITG014)the National Natural Science Foundation of China(No:52475411)the International Partnership Program of Chinese Academy of Sciences(No.172GJHZ2022096FN)。
文摘Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles appeared at the bottom of the part during single-step forming,but no wrinkles were observed during double-step forming.The thinning rate and deviation of the wall thickness of the part in each area were less than 20%and 2.7 mm,correspondingly,and the drawing depth of the part reached 45.8 mm.The effect of double-step forming was better than that of single-step forming,which was related to the IHF forming law.Besides,the characteristics of the IHF process were studied by numerical simulation.The results indicated that when double-step forming was utilized,there was almost no velocity field in the opposite direction of deformation after the bottom of the part contacted the die,and the existence of stress state at the bottom would restrain and eliminate the wrinkles.The inertia effect evolved with the driving pressure.Specially,the inertia effect can improve the flow of metal and reduce the deviation of the wall thickness of the part under double-step forming.
基金the supports of the National Natural Science Foundation of China(Grant No.52375378)。
文摘The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.
基金Supported by National Natural Science Foundation of China(12161078)Foundation for Innovative Fundamental Research Group Project of Gansu Province(24JRRA778)Project of Northwest Normal University(20240010)。
文摘In this paper,we studyλ-biharmonic hypersurfaces M_(r)^(5) of 6-dimensional pseudo Riemannian space form N_(p)^(6)(c)with the indexs 0≤p≤6,r=p−1 or p,and constant curvature c.It was proved that if the shape operator of M_(r)^(5) is diagonalizable,then the mean curvature is a constant.As an application,we find some types of biharmonic hypersurfaces of N_(p)^(6)(c)are minimal.
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
基金Supported by National Natural Science Foundation of China(Grant Nos.52422510,52373320,52175360,50725517)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(Grant No.2021QNRC001)+1 种基金the Key R&D Program of Hubei Province(Grant No.2024BAB080)Natural Science Foundation of Wuhan(Grant No.2024040801020257).
文摘In aerospace,nuclear power,and new energy vehicles industries,utilizing integrated metal components with extreme sizes and/or structures is crucial for achieving significant weight-saving,performance-improvement,and excellent reliability.These components,made from metal sheets,rings,or tubes,exhibit characteristics like ultra-thin,ultra-thick,ultra-large,ultra-long,ultra-high ribs,and large variable diameters.During plastic de-formation in metal forming processes,defects such as ruptures,wrinkles,excessive strain differences,and un-expected weak performance areas are likely to occur due to the intersection of multiple effects in different research disciplines,including materials science,processes,and mechanics of materials.Consequently,the smooth forming of integrated parts is difficult.It is the first time to review,summarize,and analyze the ad-vancement of forming methods for producing integrated parts with extreme sizes and structures.The general academic ideas to change the process conditions and sequences to optimize stress state and improve plastic deformation ability for forming the components with extreme sizes/structures are introduced.Practical ex-amples,discussed in detail in the paper,include the forming of(i)integrated ultra-thin and ultra-thick sheet components;(ii)integrated ultra-large size ring components with thin wall and high ribs;and(iii)integrated ultra-long tube components with large perimeter difference.Various plasticity technologies and process se-quences have been developed.The key processes and applications of the technologies are discussed in detail,which achieve successful plastic forming of integrated components.This paper provides state-of-the-art and perspectives for the rapidly advancing material forming fields of key metal components for the next generation of equipment.
文摘To study a form invariance of Lagrange system, the form invariance of Lagrange equations under the infinitesimal transformations was used. The definition and criterion for the form invariance are given. The relation between the form invariance and the Noether symmetry was established.
文摘The form invariance of Birkhoffian systems is a kind of invariance of the Birkhoffian equations under the infinitesimal transformations. The definition and criteria of the form invariance are given, and the relation between the form invariance and the Noether symmetry is studied.
基金Project (51304047) supported by the National Natural Science Foundation of ChinaProject (20131037) supported by Science and Technology Foundation of Liaoning Province,China
文摘A formula was proposed to calculate the distribution of metal ions quantitatively in chemical reaction system forming hydroxide where precipitation and complex are formed together. The effects of some factors on formation of precipitation and complex were investigated, and the corresponding precipitation rates of zinc, iron （III）, aluminum, copper and magnesium were calculated. As a result, it shows that the proposed formula is reliable. By the proposed formula, the existence state of metal ions in hydroxides reaction system with any metal ions can be well described and the effects of some factors on the distribution of metal ions were determined.
基金Project(51274250)supported by the National Natural Science Foundation of ChinaProject(2012BAK09B02-05)supported by the National Key Technology R&D Program during the 12th Five-year Plan of China
文摘An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.
基金Project supported by the International Fertilizer Industry Association (IFI), Francethe Potast & Phosphate Institute (PPI), USA and Canadathe International Potassium Institute (IPI), Switzerland
文摘Changes of soil organic nitrogen forms and soil nitrogen supply under continuous rice cropping system were investigated in a long-term fertilization experiment in Jinhua, Zhejiang Province, China. The fertilizer treatments included combination of P-K, N-K, N-P, and N-P-K as well as the control. After six years of continuous double-rice cropping, total soil N and hydrolysable N contents remained stable in plots with N treatments, while the hydrolysable N contents were substantially reduced in those plots without N application. Compared to the unbalanced fertilization treatments, P and K increased the percentage of hydrolysable ammonium N in the total soil N with the balanced application of N, and also maintained higher rice grain yields and nitrogen uptake. Grain yield was positively correlated with total N uptake (r = 0.875**), hydrolysable N (r = 0.608**), hydrolysable ammonium N (r = 0.560**) and the hydrolysable unknown N (r = 0.417**). Total N uptake was positively correlated with hydrolysable N (r = 0.608**), hydrolysable ammonium N (r = 0.440**) and hydrolysable unknown N (r = 0.431**). Soil nutrient depletion and/or unbalanced fertilization to rice crop reduced N content in soil microbial biomass, and therefore increased C/N ratio, suggesting a negative effect on the total microbial biomass in the soil.
基金Supported by the Natural Science Foundation of Hebei Province of China(A2005000088)
文摘In this article, the Killing form of a Lie supertriple system （LSTS） and that of its imbedding Lie superalgebra （LSA） are investigated, and a unique decomposition theorem for a quasiclassical LSTS with trivial center is established by means of the parallel decomposition theorem for a quasiclassical LSA.
基金Vivekanand Education Society’s College of Pharmacy, Chembur, Mumbai, for their support and encouragement
文摘Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system’s ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier.Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance.For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance.In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions) along with their evaluation parameters have also been reviewed.
文摘The present study was conducted in the alpine pastures of Tungnath （30° 14＇ N and 79° 13＇ E） to observe life-form and growth-form patterns of alpine plant species under grazed and ungrazed conditions and to work out the plant life form spectrum. Species were categorized as plant habit, height and length of growth-cycle and life-form classes according to Raunkiaer＇s system. The results show that in total of 68 species at grazed site, hemicryptophytes （He） accounted for 50.00% species, followed by cryptophytes （26.47%）, chamaephytes （16.18%）, phanemphytes （4.41%） and therophytes （2.94%）. At the ungrazed site in 65 plant species, hemicryptophytes （He） accounted fo＇r 49.23% species, cryptophytes （26.15%）, chamaephytes （15.38%）, phanerophytes （6.15%） and ther6phytes （3.08 % species）. In general, hemicrptophyte are dominant^in both sites i.e. graged and ungrazed. Growth form categories were classified as forbs, shrubs, grasses and sedges＇and undershrubs, according to plant habit and height. On the basis of length of the growth cycle, species were categorized as plant species of short growth cycle, intermediate growth cycle and long growth cycle. The short forbs of plant habit and height, had the highest emergence, and grasses and sedges had the lowest emergence in representative species. Percentage of species with long growth cycle was highest in both sites.
基金Project(51175122)supported by the National Natural Science Foundation of China
文摘The aim of this work is to simulate thermal deformation of tool system and investigate the influence of cutting parameters on it in single-point diamond turning(SPDT) of aluminum alloy. The experiments with various cutting parameters were conducted. Cutting temperature was measured by FLIR A315 infrared thermal imager. Tool wear was measured by scanning electron microscope(SEM). The numerical model of heat flux considering tool wear generated in cutting zone was established. Then two-step finite element method(FEM) simulations matching the experimental conditions were carried out to simulate the thermal deformation. In addition, the tests of deformation of tool system were performed to verify previous simulation results. And then the influence of cutting parameters on thermal deformation was investigated. The results show that the temperature and thermal deformation from simulations agree well with the results from experiments in the same conditions. The maximum thermal deformation of tool reaches to 7 μm. The average flank wear width and cutting speed are the dominant factors affecting thermal deformation, and the effective way to decrease the thermal deformation of tool is to control the tool wear and the cutting speed.
基金Project supported by the National Natural Science Foundation of China(51061004)Science Foundation of Guangxi Education Department(2013YB377)
文摘A method based on the semi-empirical Miedema model and a geometrical model was used to study the glass forming abili-ties （GFA） and the amorphous forming ranges of Al-Fe-Nd-Zr system and its constituent ternary systems. The amorphous forming composition ranges were analyzed based on different criteria such asΔGam-ss and PHSS （PHSS=ΔHchem （ΔSC/R）（ΔSσ/R）） for Al-Fe-Nd system. The predicted amorphous forming range was in good agreement with the experimental results. The results showed that the criterion ofΔGam-ss was more accurate, and agreed well with the experiment results. The Gibbs free energy differenceΔGam-ss and pa-rameter PHSS were then used to predict the amorphous forming composition range for the rest of the constitutive ternary systems of Al-Fe-Nd-Zr. In addition, the amorphous forming composition ranges of the （Al-Fe-Zr）100-xNdx （x=50, 60, 70） systems were predicted byΔGam-ss and the modified parameter PHSS. The Gibbs free energy of Al10（Fe1-xZrx）30Nd60 were also calculated. The GFA parameter PHSS indicated that the composition with the highest GFA was Al33.5Fe13.5Zr3Nd50 for the （Al-Fe-Zr）50Nd50 system, Al28.8Fe10Zr1.2Nd60 for the （Al-Fe-Zr）40Nd60 system and Al22.8Fe6.9Zr0.3Nd70 for the （Al-Fe-Zr）30Nd70 system, and the results suggested that those alloys with high content of Al had higher GFA. The appropriate content of neodymium and zirconium resulted in the lower value of PHSS and increased the GFA obviously.
