Deep tight reservoirs exhibit complex stress and seepage fields due to varying pore structures,thus the seepage characteristics are significant for enhancing oil production.This study conducted triaxial compression an...Deep tight reservoirs exhibit complex stress and seepage fields due to varying pore structures,thus the seepage characteristics are significant for enhancing oil production.This study conducted triaxial compression and permeability tests to investigate the mechanical and seepage properties of tight sandstone.A digital core of tight sandstone was built using Computed Tomography(CT)scanning,which was divided into matrix and pore phases by a pore equivalent diameter threshold.A fluid-solid coupling model was established to investigate the seepage characteristics at micro-scale.The results showed that increasing the confining pressure decreased porosity,permeability,and flow velocity,with the pore phase becoming the dominant seepage channel.Cracks and large pores closed first under increasing pressure,resulted in a steep drop in permeability.However,permeability slightly decreased under high confining pressure,which followed a first-order exponential function.Flow velocity increased with seepage pressure.And the damage mainly occurred in stress-concentration regions under low seepage pressure.Seepage behavior followed linear Darcy flow,the damage emerged at seepage entrances under high pressure,which decreased rock elastic modulus and significantly increased permeability.展开更多
This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE...This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.展开更多
Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is partic...Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is particularly prone to damage under combined stress and seepage interactions,and the mesoscale investigations on the damage-seepage coupling behavior of HAC under complex stress states remain limited.This research develops a numerical three-dimensional mesoscale model composed of asphalt mortar and polyhedral aggregate to investigate the stress-damage-seepage coupling behavior in HAC.In this model,asphalt mortar yields the viscoelastic continuum damage law and aggregate obeys the Mazars’elastic-brittle damage law;simultaneously,the effective permeability coefficient of asphalt mortar is assumed to follow an exponential function of damage.The predicted deviatoric stress-strain and hydraulic gradient-seepage curves both are in good agreement with the reported experimental results,which shows the proposed model is valid and reasonable.The simulated results indicate that the damaged asphalt mortar can induce localized areas of high permeability,which in turn affects the overall impervious performance of HAC.展开更多
To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests ...To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear beh...High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.展开更多
As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To...As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.展开更多
Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to re...Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to reinforce GRS. The effects of cement content and SiO_(2)/Na2O ratio of the alkaline solution on the static and dynamic strengths of GRS were discussed. Microscopically, the reinforcement mechanism and coupling effect were examined using X-ray diffraction (XRD), micro-computed tomography (micro-CT), and scanning electron microscopy (SEM). The results indicated that the addition of 2% cement and an alkaline solution with an SiO_(2)/Na2O ratio of 0.5 led to the densest matrix, lowest porosity, and highest static compressive strength, which was 4994 kPa with a dynamic impact resistance of 75.4 kN after adding glass fiber. The compressive strength and dynamic impact resistance were a result of the coupling effect of cement hydration, a pozzolanic reaction of clay minerals in the GRS, and the alkali activation of clay minerals. Excessive cement addition or an excessively high SiO_(2)/Na2O ratio in the alkaline solution can have negative effects, such as the destruction of C-(A)-S-H gels by the alkaline solution and hindering the production of N-A-S-H gels. This can result in damage to the matrix of reinforced GRS, leading to a decrease in both static and dynamic strengths. This study suggests that further research is required to gain a more precise understanding of the effects of this mixture in terms of reducing our carbon footprint and optimizing its properties. The findings indicate that cement and alkaline solution are appropriate for GRS and that the reinforced GRS can be used for high-strength foundation and embankment construction. The study provides an analysis of strategies for mitigating and managing GRS slope failures, as well as enhancing roadbed performance.展开更多
Deep underground excavation causes considerable unloading effects,leading to a pronounced bias pressure phenomenon.The deformation and seepage characteristics of rock masses under different gas and confining pressures...Deep underground excavation causes considerable unloading effects,leading to a pronounced bias pressure phenomenon.The deformation and seepage characteristics of rock masses under different gas and confining pressures were investigated via triaxial loading and unloading seepage tests.When the influential coefficient of effective confining pressure(β)is less than 0.065,the seepage force considerably weakens the strength of fractured rock masses.Conversely,whenβis greater than 0.065,the opposite is true.Moreover,the increase in the axial load leads to an increase in the precast fracture volumetric strain,which is the main reason for the increase in fracture permeability.This effect is particularly significant during the unloading stage.Based on the test results,a method for calculating the dynamic seepage evolution of rock masses,considering the effects of rock mass damage and fracture deformation,is introduced,and the effectiveness of the calculation is validated.The entire description of the seepage under loading and unloading was accomplished.The equivalent relationship between the lateral and normal stresses on fracture surfaces ranges from 0.001 to 0.1,showing an exponential variation between the lateral stress influence coefficient on normal deformation(χ)and seepage pressure.Before the failure of the rock mass,the seepage in the fractures was in a linear laminar flow state.However,after the failure,when the gas pressure reached 2 MPa,the flow state in the fractures transitioned to nonlinear laminar flow.The results are important for predicting hazardous gas leaks during deep underground engineering excavation.展开更多
This study focuses on coupled vibrations of rotating thin-walled composite beams subjected to hygrothermal effects.In the existing literature,many studies have been conducted on coupled bending-torsional vibration and...This study focuses on coupled vibrations of rotating thin-walled composite beams subjected to hygrothermal effects.In the existing literature,many studies have been conducted on coupled bending-torsional vibration and resonance in hygrothermal environments.Few studies considered the coupled flapwise-edgewise and resonances of composite thin-walled beams.Considering this,the flapwise-edgewise coupling effects and resonant characteristics of rotating thin-walled composite beams in a hygrothermal environment are studied.The Rayleigh–Ritz method is used to solve the equations of the beam.Results indicate that flapwise-edgewise coupling factors are essential for the vibration analysis of rectangular thin-walled beams.The ply angle and setting angle strongly affect the internal and external resonances.Large ply angles can significantly reduce the chances of primary internal and external resonances occurring when the permitted rotational speed is lower.展开更多
Hydraulic fracturing technology has played an important role in the exploitation of unconventional oil and gas resources,however,its application to gas hydrate reservoirs has been rarely studied.Currently,there is sti...Hydraulic fracturing technology has played an important role in the exploitation of unconventional oil and gas resources,however,its application to gas hydrate reservoirs has been rarely studied.Currently,there is still limited understanding of the propagation and extension of fractures around the wellbore during the fracturing process of horizontal wells in hydrate reservoirs,as well as the stress interference patterns between fractures.This study simulates hydraulic fracturing processes in hydrate reservoirs using a fluidsolid coupling discrete element method(DEM),and analyzes the impacts of hydrate saturation and geological and engineering factors on fracture extension and stress disturbance.The results show that hydraulic fracturing is more effective when hydrate saturation exceeds 30%and that fracture pressure increases with saturation.The increase in horizontal stress differential enhances the directionality of fracture propagation and reduces stress disturbance.The distribution uniformity index(DUI)reveals that injection pressure is directly proportional to the number of main fractures and inversely proportional to fracturing time,with fracturing efficiency depending on the spacing between injection points and the distance between wells.This work may provide reference for the commercial exploitation of natural gas hydrates.展开更多
Aqueous rechargeable Ni-Fe batteries exhibit unique advantages in large-scale energy storage thanks to their affordability,safety,and reliability.However,their limited energy density and Coulombic efficiency stem from...Aqueous rechargeable Ni-Fe batteries exhibit unique advantages in large-scale energy storage thanks to their affordability,safety,and reliability.However,their limited energy density and Coulombic efficiency stem from unfavorable OH^(−)adsorption capability and low electrochemical activity of Fe sites,result in electrode kinetic delays for Fe anodes.Here,we report Mn and S co-modified FeOOH(MSFF)nanosheets as an advanced anode in Ni-Fe batteries,synthesized from a facile one-step surface-redox-etching method at room temperature.Based on the strong electronic coupling effect between Mn and S atoms,such MSFF anode presents fast electron transport capability,enhanced OH^(−)-adsorption capability,and redox reactivity.Specifically,the MSFF anode can achieve a high areal capacity of 2 mAh cm^(−2)at 10 mA cm^(−2),which retains a staggering 96%of the initial capacity after undergoing 9000 cycles at a higher current density of 30 mA cm^(−2).In addition,the assembled Ni-Fe battery can provide a capacity of 0.85 mAh cm^(−2)at 16 mA cm^(−2),significantly outperforming most recently reported aqueous rechargeable batteries.This work may offer an innovative and feasible approach for modulating the local electronic structure of high-performance Ni-Fe battery electrode materials.展开更多
This paper presents an improved level set method for topology optimization of geometrically nonlinear structures accounting for the effect of thermo-mechanical couplings.It derives a new expression for element couplin...This paper presents an improved level set method for topology optimization of geometrically nonlinear structures accounting for the effect of thermo-mechanical couplings.It derives a new expression for element coupling stress resulting from the combination of mechanical and thermal loading,using geometric nonlinear finite element analysis.A topological model is then developed to minimize compliance while meeting displacement and frequency constraints to fulfill design requirements of structural members.Since the conventional Lagrange multiplier search method is unable to handle convergence instability arising from large deformation,a novel Lagrange multiplier search method is proposed.Additionally,the proposed method can be extended to multi-constrained geometrically nonlinear topology optimization,accommodating multiple physical field couplings.展开更多
Based on the rapid advancements in nanomaterials and nanotechnology,the Nanofluidic Reverse Electrodialysis(NRED)has attracted significant attention as an innovative and promising energy conversion strategy for extrac...Based on the rapid advancements in nanomaterials and nanotechnology,the Nanofluidic Reverse Electrodialysis(NRED)has attracted significant attention as an innovative and promising energy conversion strategy for extracting sustainable and clean energy fromthe salinity gradient energy.However,the scarcity of research investigating the intricate multi-factor coupling effects on the energy conversion performance,especially the trade-offs between ion selectivity and mass transfer in nanochannels,of NRED poses a great challenge to achieving breakthroughs in energy conversion processes.This numerical study innovatively investigates the multi-factor coupling effect of three critical operational factors,including the nanochannel configuration,the temperature field,and the concentration difference,on the energy conversion processes of NRED.In this work,a dimensionless amplitude parameter s is introduced to emulate the randomly varied wall configuration of nanochannels that inherently occur in practical applications,thereby enhancing the realism and applicability of our analysis.Numerical results reveal that the application of a temperature gradient,which is oriented in opposition to the concentration gradient,enhances the ion transportation and selectivity simultaneously,leading to an enhancement in both output power and energy conversion efficiency.Additionally,the increased fluctuation of the nanochannel wall from s=0 to s=0.08 improves ion selectivity yet raises ion transport resistance,resulting in an enhancement in output power and energy conversion efficiency but a slight reduction in current.Furthermore,with increasing the concentration ratio cH/cL from 10 to 1000,either within a fixed temperature field or at a constant dimensionless amplitude,the maximumpower consistently attains its optimal value at a concentration ratio of 100 but the cation transfer number experiences amonotonic decrease across this entire range of concentration ratios.Finally,uponmodifying the operational parameters fromthe baseline condition of s=0,c_(H)/c_(L)=10,andΔT=0 K to the targetedconditionof s=0.08,c_(H)/c_(L)=50,andΔT=25 K,there is a concerted improvement observed in the open-circuit potential,short-circuit current,andmaximumpower,with respective increments of 8.86%,204.97%,and 232.01%,but a reduction in cation transfer number with a notable decrease of 15.37%.展开更多
The fluid-solid coupling theory, an interdisciplinary science between hydrodynamics and solid mechanics, is an important tool for response analysis and direct design of structures in naval architecture and ocean engin...The fluid-solid coupling theory, an interdisciplinary science between hydrodynamics and solid mechanics, is an important tool for response analysis and direct design of structures in naval architecture and ocean engineering. By applying the corresponding relations between generalized forces and generalized displacements, convolutions were performed between the basic equations of elasto-dynamics in the primary space and corresponding virtual quantities. The results were integrated and then added algebraically. In light of the fact that body forces and surface forces are both follower forces, the generalized quasi-complementary energy principle with two kinds of variables for an initial value problem is established in non-conservative systems. Using the generalized quasi-complementary energy principle to deal with the fluid-solid coupling problem and to analyze the dynamic response of structures, a method for using two kinds of variables simultaneously for calculation of force and displacement was derived.展开更多
As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture...As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture the recoil dynamics of a deep-water riser in an emergency disconnect scenario, researchers typically focus on modelling the influential subsystems (e.g., the tensioner, the mud discharge and seawater refilling process) which can be solved in the preprocessing, and then the determined parameters are transmitted into an existing global riser analysis software. Distinctively, the current study devotes efforts into the coupling effects resulting from that the suspended riser reacts the platform heave motion via the tensioner system in the course of recoil and the discharging fluid column follows the oscillation of the riser in the mud discharge process. Four simulation models are established based on lumped mass method employing different formulas for the top boundary condition of the riser and the discharging flow acceleration. It demonstrates that the coupling effects discussed above can significantly affect the recoil behavior during the transition phase from initial disconnect to the final hang-off state. It is recommended to develop a fully- coupled integrated model for recoil analysis and anti-recoil control system design before extreme deep-water applications.展开更多
The water content and nutrient in soil are two main determine factors to crop yield and quality, managements of which in field are of great importance to maintain sustainable high yield. The objective of this study wa...The water content and nutrient in soil are two main determine factors to crop yield and quality, managements of which in field are of great importance to maintain sustainable high yield. The objective of this study was to measure the uptake, forms, and use efficiency of phosphorus （P） in wheat under four levels of irrigation （W0, W1, W2, and W3） and three levels of P application （P0, P1, and P2） through two growth seasons of wheat （2008-2010）. The field experiment was carried out in a low level of soil P concentration and the eultivar was Jimai 20. The results indicated that P fertilizer combined with irrigation not only improved the activity of phosphatase in soil, but also increased P accumulation in wheat, similar results was found in the grain of wheat, the content of total P increased significantly. Meanwhile, the mainly existence forms of P in grain were the lecithoid-P and labile organic-P. On the other hand, in comparison to the irrigation, the dry matter and grain P production efficiency and postponing P application of wheat increased with increasing Papplication rates within the range of 0-180 kg P2O5 ha-1. The interaction between P and irrigation also significantly （P〈0.01） affected on the P accumulation, grain total P, grain phospholipid P, and P production efficiency. In this study, therefore, the P applications and irrigation improved grain P production efficiency and postponing P application of winter wheat, and W2P2 treatment （180 kg P2O5 ha-1 combination with 120 mm irrigation） had a high P accumulation and P use efficiency, it was an optimum level for P fertilizer application and irrigation in this region.展开更多
In this paper, modifications to the finite-difference time-domain(FD-TD) method for modeling microwave pulse coupling into a slot, which is much narrower than one conventional FD-TD cell, are discussed. The coupling p...In this paper, modifications to the finite-difference time-domain(FD-TD) method for modeling microwave pulse coupling into a slot, which is much narrower than one conventional FD-TD cell, are discussed. The coupling process of microwave pulse into a slot is studied by using the modified FD-TD method, and the dependence of microwave coupling on slot sizes, the carrier frequencies and the polarization directions of the incident waves is analysed. Resonant and enhancement effects which occur in this process are observed. The condition at which the resonant effect takes place is also presented.展开更多
Based on the results of two dimension velo city structure, 1∶100 000 aeromagnetic anomaly, 1∶200 000 bouguer gravity anom aly and seismic anisotropy of Jiaodong and neighboring region in Shandong, China , the info...Based on the results of two dimension velo city structure, 1∶100 000 aeromagnetic anomaly, 1∶200 000 bouguer gravity anom aly and seismic anisotropy of Jiaodong and neighboring region in Shandong, China , the information of geophysical field was divided into two parts: deep and sh allow focus fields. And then, the information of two different fields was c ombined with that of deep seated geology and ore deposit features. The syntheti c result was adopted to analyze three dimension structure, to probe into crust mantle coupling effects of mineralization and dynamics of ore formation system .展开更多
Abstract： A joint solution model of variabk：-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated...Abstract： A joint solution model of variabk：-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated by the finite element method （FEM）. The results are basically consistent with relative experimental data. The calculated average heat transfer coefficient reaches 1.7~105 W/（m2. K）. When the equal percentage valve is used, the system needs the minimum requirements of valve control, but brings the highest construction cost. With the： decrease of initial steam pressure, the heat transfer intensity also weakens but the steam flow increases. With the initial water filling coefficient increasing or the temperature of steam supply decreasing, the amount of accumulative steam flow increases with the growth of steam pressure. When the pressure of steam supply drops, the steam flow gradient increases during the maximum opening period of control valve, and causes the maximum steam flow to increase.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.42272153 and 42472195)the Research Fund of PetroChina Tarim Oilfield Company(No.671023060003)the Research Fund of China National Petroleum Corporation Limited(No.2023ZZ16YJ04).
文摘Deep tight reservoirs exhibit complex stress and seepage fields due to varying pore structures,thus the seepage characteristics are significant for enhancing oil production.This study conducted triaxial compression and permeability tests to investigate the mechanical and seepage properties of tight sandstone.A digital core of tight sandstone was built using Computed Tomography(CT)scanning,which was divided into matrix and pore phases by a pore equivalent diameter threshold.A fluid-solid coupling model was established to investigate the seepage characteristics at micro-scale.The results showed that increasing the confining pressure decreased porosity,permeability,and flow velocity,with the pore phase becoming the dominant seepage channel.Cracks and large pores closed first under increasing pressure,resulted in a steep drop in permeability.However,permeability slightly decreased under high confining pressure,which followed a first-order exponential function.Flow velocity increased with seepage pressure.And the damage mainly occurred in stress-concentration regions under low seepage pressure.Seepage behavior followed linear Darcy flow,the damage emerged at seepage entrances under high pressure,which decreased rock elastic modulus and significantly increased permeability.
基金National Natural Science Foundation of China under Grant Nos.U2139208 and 52278516Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant No.2024D15Key Laboratory of Soft Soil Characteristic and Engineering Environment,Tianjin Chengjian University under Grant No.2022SCEEKL003。
文摘This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC3005603-01)the Natural Science Foundation Science of Anhui Province(Grant No.2308085US02).
文摘Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is particularly prone to damage under combined stress and seepage interactions,and the mesoscale investigations on the damage-seepage coupling behavior of HAC under complex stress states remain limited.This research develops a numerical three-dimensional mesoscale model composed of asphalt mortar and polyhedral aggregate to investigate the stress-damage-seepage coupling behavior in HAC.In this model,asphalt mortar yields the viscoelastic continuum damage law and aggregate obeys the Mazars’elastic-brittle damage law;simultaneously,the effective permeability coefficient of asphalt mortar is assumed to follow an exponential function of damage.The predicted deviatoric stress-strain and hydraulic gradient-seepage curves both are in good agreement with the reported experimental results,which shows the proposed model is valid and reasonable.The simulated results indicate that the damaged asphalt mortar can induce localized areas of high permeability,which in turn affects the overall impervious performance of HAC.
基金supported by the Yunnan Province Science and Technology Plan Project(No.202403AA080001-4)the Key Research and Development Project of Guangxi,China(No.guikeAB24010144)the National Key Research and Development Project of China(Nos.2021YFB3901402 and 2018YFC1504802)。
文摘To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金support from the National Key Research and Development Program of China(Grant No.2022YFE0137200)supported by the Taishan Scholars Program and Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety(Grant No.SKLGME023003).
文摘High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.
基金supported by the National Natural Science Foundation of China(Nos.52222110,52401354,and 52301353).
文摘As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.
基金the support provided by the National Natural Science Foundation of China(Grant Nos.52278336 and 42302032)Guangdong Basic and Applied Research Foundation(Grant Nos.2023B1515020061).
文摘Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to reinforce GRS. The effects of cement content and SiO_(2)/Na2O ratio of the alkaline solution on the static and dynamic strengths of GRS were discussed. Microscopically, the reinforcement mechanism and coupling effect were examined using X-ray diffraction (XRD), micro-computed tomography (micro-CT), and scanning electron microscopy (SEM). The results indicated that the addition of 2% cement and an alkaline solution with an SiO_(2)/Na2O ratio of 0.5 led to the densest matrix, lowest porosity, and highest static compressive strength, which was 4994 kPa with a dynamic impact resistance of 75.4 kN after adding glass fiber. The compressive strength and dynamic impact resistance were a result of the coupling effect of cement hydration, a pozzolanic reaction of clay minerals in the GRS, and the alkali activation of clay minerals. Excessive cement addition or an excessively high SiO_(2)/Na2O ratio in the alkaline solution can have negative effects, such as the destruction of C-(A)-S-H gels by the alkaline solution and hindering the production of N-A-S-H gels. This can result in damage to the matrix of reinforced GRS, leading to a decrease in both static and dynamic strengths. This study suggests that further research is required to gain a more precise understanding of the effects of this mixture in terms of reducing our carbon footprint and optimizing its properties. The findings indicate that cement and alkaline solution are appropriate for GRS and that the reinforced GRS can be used for high-strength foundation and embankment construction. The study provides an analysis of strategies for mitigating and managing GRS slope failures, as well as enhancing roadbed performance.
基金supported by the National Natural Science Foundation of China(Grant No.52374079)Chongqing Graduate Research Innovation Project(Grant No.CYB22032)Chongqing Talents and Outstanding Scientists Project(Grant No.cstc2024ycjhbgzxm0032).
文摘Deep underground excavation causes considerable unloading effects,leading to a pronounced bias pressure phenomenon.The deformation and seepage characteristics of rock masses under different gas and confining pressures were investigated via triaxial loading and unloading seepage tests.When the influential coefficient of effective confining pressure(β)is less than 0.065,the seepage force considerably weakens the strength of fractured rock masses.Conversely,whenβis greater than 0.065,the opposite is true.Moreover,the increase in the axial load leads to an increase in the precast fracture volumetric strain,which is the main reason for the increase in fracture permeability.This effect is particularly significant during the unloading stage.Based on the test results,a method for calculating the dynamic seepage evolution of rock masses,considering the effects of rock mass damage and fracture deformation,is introduced,and the effectiveness of the calculation is validated.The entire description of the seepage under loading and unloading was accomplished.The equivalent relationship between the lateral and normal stresses on fracture surfaces ranges from 0.001 to 0.1,showing an exponential variation between the lateral stress influence coefficient on normal deformation(χ)and seepage pressure.Before the failure of the rock mass,the seepage in the fractures was in a linear laminar flow state.However,after the failure,when the gas pressure reached 2 MPa,the flow state in the fractures transitioned to nonlinear laminar flow.The results are important for predicting hazardous gas leaks during deep underground engineering excavation.
基金supported by the National Natural Science Foundation of China(Grant Nos.11902002 and 51705002)the Sichuan Provincial Natural Science Foundation(Grant No.2022NSFSC0275)the University Outstanding Youth Researcher Support Program of the Education Department of Anhui Province,and the Teaching Project of the Education Department of Anhui Province(Grant No.2022xxsfkc023).
文摘This study focuses on coupled vibrations of rotating thin-walled composite beams subjected to hygrothermal effects.In the existing literature,many studies have been conducted on coupled bending-torsional vibration and resonance in hygrothermal environments.Few studies considered the coupled flapwise-edgewise and resonances of composite thin-walled beams.Considering this,the flapwise-edgewise coupling effects and resonant characteristics of rotating thin-walled composite beams in a hygrothermal environment are studied.The Rayleigh–Ritz method is used to solve the equations of the beam.Results indicate that flapwise-edgewise coupling factors are essential for the vibration analysis of rectangular thin-walled beams.The ply angle and setting angle strongly affect the internal and external resonances.Large ply angles can significantly reduce the chances of primary internal and external resonances occurring when the permitted rotational speed is lower.
基金financially supported by the National Key Research and Development Plan(2023YFC2811001)the National Natural Science Foundation of China(42206233)the Taishan Scholars Program(tsqn202312280,tsqn202306297)。
文摘Hydraulic fracturing technology has played an important role in the exploitation of unconventional oil and gas resources,however,its application to gas hydrate reservoirs has been rarely studied.Currently,there is still limited understanding of the propagation and extension of fractures around the wellbore during the fracturing process of horizontal wells in hydrate reservoirs,as well as the stress interference patterns between fractures.This study simulates hydraulic fracturing processes in hydrate reservoirs using a fluidsolid coupling discrete element method(DEM),and analyzes the impacts of hydrate saturation and geological and engineering factors on fracture extension and stress disturbance.The results show that hydraulic fracturing is more effective when hydrate saturation exceeds 30%and that fracture pressure increases with saturation.The increase in horizontal stress differential enhances the directionality of fracture propagation and reduces stress disturbance.The distribution uniformity index(DUI)reveals that injection pressure is directly proportional to the number of main fractures and inversely proportional to fracturing time,with fracturing efficiency depending on the spacing between injection points and the distance between wells.This work may provide reference for the commercial exploitation of natural gas hydrates.
基金financially supported by National Natural Science Foundation of China(Nos.52407242,52162025)Specific Research Fund of the Innovation Platform for Academicians of Hainan Province(No.YSPTZX202123).
文摘Aqueous rechargeable Ni-Fe batteries exhibit unique advantages in large-scale energy storage thanks to their affordability,safety,and reliability.However,their limited energy density and Coulombic efficiency stem from unfavorable OH^(−)adsorption capability and low electrochemical activity of Fe sites,result in electrode kinetic delays for Fe anodes.Here,we report Mn and S co-modified FeOOH(MSFF)nanosheets as an advanced anode in Ni-Fe batteries,synthesized from a facile one-step surface-redox-etching method at room temperature.Based on the strong electronic coupling effect between Mn and S atoms,such MSFF anode presents fast electron transport capability,enhanced OH^(−)-adsorption capability,and redox reactivity.Specifically,the MSFF anode can achieve a high areal capacity of 2 mAh cm^(−2)at 10 mA cm^(−2),which retains a staggering 96%of the initial capacity after undergoing 9000 cycles at a higher current density of 30 mA cm^(−2).In addition,the assembled Ni-Fe battery can provide a capacity of 0.85 mAh cm^(−2)at 16 mA cm^(−2),significantly outperforming most recently reported aqueous rechargeable batteries.This work may offer an innovative and feasible approach for modulating the local electronic structure of high-performance Ni-Fe battery electrode materials.
基金supported by grants from the National Natural Science Foundation of China (51478130)the Guangzhou Municipal Education Bureau’s Scientific Research Project, China (2024312217)+1 种基金the China Scholarship Council (201808440070)the 111 Project of China (D21021).
文摘This paper presents an improved level set method for topology optimization of geometrically nonlinear structures accounting for the effect of thermo-mechanical couplings.It derives a new expression for element coupling stress resulting from the combination of mechanical and thermal loading,using geometric nonlinear finite element analysis.A topological model is then developed to minimize compliance while meeting displacement and frequency constraints to fulfill design requirements of structural members.Since the conventional Lagrange multiplier search method is unable to handle convergence instability arising from large deformation,a novel Lagrange multiplier search method is proposed.Additionally,the proposed method can be extended to multi-constrained geometrically nonlinear topology optimization,accommodating multiple physical field couplings.
基金funded by the National Natural Science Foundation of China[52106246]the Postgraduate Research&Practice innovation Program of Jiangsu Province[KYCX24_1641].
文摘Based on the rapid advancements in nanomaterials and nanotechnology,the Nanofluidic Reverse Electrodialysis(NRED)has attracted significant attention as an innovative and promising energy conversion strategy for extracting sustainable and clean energy fromthe salinity gradient energy.However,the scarcity of research investigating the intricate multi-factor coupling effects on the energy conversion performance,especially the trade-offs between ion selectivity and mass transfer in nanochannels,of NRED poses a great challenge to achieving breakthroughs in energy conversion processes.This numerical study innovatively investigates the multi-factor coupling effect of three critical operational factors,including the nanochannel configuration,the temperature field,and the concentration difference,on the energy conversion processes of NRED.In this work,a dimensionless amplitude parameter s is introduced to emulate the randomly varied wall configuration of nanochannels that inherently occur in practical applications,thereby enhancing the realism and applicability of our analysis.Numerical results reveal that the application of a temperature gradient,which is oriented in opposition to the concentration gradient,enhances the ion transportation and selectivity simultaneously,leading to an enhancement in both output power and energy conversion efficiency.Additionally,the increased fluctuation of the nanochannel wall from s=0 to s=0.08 improves ion selectivity yet raises ion transport resistance,resulting in an enhancement in output power and energy conversion efficiency but a slight reduction in current.Furthermore,with increasing the concentration ratio cH/cL from 10 to 1000,either within a fixed temperature field or at a constant dimensionless amplitude,the maximumpower consistently attains its optimal value at a concentration ratio of 100 but the cation transfer number experiences amonotonic decrease across this entire range of concentration ratios.Finally,uponmodifying the operational parameters fromthe baseline condition of s=0,c_(H)/c_(L)=10,andΔT=0 K to the targetedconditionof s=0.08,c_(H)/c_(L)=50,andΔT=25 K,there is a concerted improvement observed in the open-circuit potential,short-circuit current,andmaximumpower,with respective increments of 8.86%,204.97%,and 232.01%,but a reduction in cation transfer number with a notable decrease of 15.37%.
基金Supported by the National Natural Science Foundation under Grant No.10272034the Doctoral Education Foundation under Grant No.20060217020
文摘The fluid-solid coupling theory, an interdisciplinary science between hydrodynamics and solid mechanics, is an important tool for response analysis and direct design of structures in naval architecture and ocean engineering. By applying the corresponding relations between generalized forces and generalized displacements, convolutions were performed between the basic equations of elasto-dynamics in the primary space and corresponding virtual quantities. The results were integrated and then added algebraically. In light of the fact that body forces and surface forces are both follower forces, the generalized quasi-complementary energy principle with two kinds of variables for an initial value problem is established in non-conservative systems. Using the generalized quasi-complementary energy principle to deal with the fluid-solid coupling problem and to analyze the dynamic response of structures, a method for using two kinds of variables simultaneously for calculation of force and displacement was derived.
基金financially supported by the National Natural Science Foundation of China(Grant No.51879161)
文摘As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture the recoil dynamics of a deep-water riser in an emergency disconnect scenario, researchers typically focus on modelling the influential subsystems (e.g., the tensioner, the mud discharge and seawater refilling process) which can be solved in the preprocessing, and then the determined parameters are transmitted into an existing global riser analysis software. Distinctively, the current study devotes efforts into the coupling effects resulting from that the suspended riser reacts the platform heave motion via the tensioner system in the course of recoil and the discharging fluid column follows the oscillation of the riser in the mud discharge process. Four simulation models are established based on lumped mass method employing different formulas for the top boundary condition of the riser and the discharging flow acceleration. It demonstrates that the coupling effects discussed above can significantly affect the recoil behavior during the transition phase from initial disconnect to the final hang-off state. It is recommended to develop a fully- coupled integrated model for recoil analysis and anti-recoil control system design before extreme deep-water applications.
基金financial supported by the National Natural Science Foundation of China(30900876 and 31101127)the Key Technology R&D Program of China(2012BAD14B17)+1 种基金the Special Research Funding for Public Benefit Industries (Agriculture) of China(201103001)the Major Innovation Project for Applied Technology of Shandong Province,China
文摘The water content and nutrient in soil are two main determine factors to crop yield and quality, managements of which in field are of great importance to maintain sustainable high yield. The objective of this study was to measure the uptake, forms, and use efficiency of phosphorus （P） in wheat under four levels of irrigation （W0, W1, W2, and W3） and three levels of P application （P0, P1, and P2） through two growth seasons of wheat （2008-2010）. The field experiment was carried out in a low level of soil P concentration and the eultivar was Jimai 20. The results indicated that P fertilizer combined with irrigation not only improved the activity of phosphatase in soil, but also increased P accumulation in wheat, similar results was found in the grain of wheat, the content of total P increased significantly. Meanwhile, the mainly existence forms of P in grain were the lecithoid-P and labile organic-P. On the other hand, in comparison to the irrigation, the dry matter and grain P production efficiency and postponing P application of wheat increased with increasing Papplication rates within the range of 0-180 kg P2O5 ha-1. The interaction between P and irrigation also significantly （P〈0.01） affected on the P accumulation, grain total P, grain phospholipid P, and P production efficiency. In this study, therefore, the P applications and irrigation improved grain P production efficiency and postponing P application of winter wheat, and W2P2 treatment （180 kg P2O5 ha-1 combination with 120 mm irrigation） had a high P accumulation and P use efficiency, it was an optimum level for P fertilizer application and irrigation in this region.
文摘In this paper, modifications to the finite-difference time-domain(FD-TD) method for modeling microwave pulse coupling into a slot, which is much narrower than one conventional FD-TD cell, are discussed. The coupling process of microwave pulse into a slot is studied by using the modified FD-TD method, and the dependence of microwave coupling on slot sizes, the carrier frequencies and the polarization directions of the incident waves is analysed. Resonant and enhancement effects which occur in this process are observed. The condition at which the resonant effect takes place is also presented.
文摘Based on the results of two dimension velo city structure, 1∶100 000 aeromagnetic anomaly, 1∶200 000 bouguer gravity anom aly and seismic anisotropy of Jiaodong and neighboring region in Shandong, China , the information of geophysical field was divided into two parts: deep and sh allow focus fields. And then, the information of two different fields was c ombined with that of deep seated geology and ore deposit features. The syntheti c result was adopted to analyze three dimension structure, to probe into crust mantle coupling effects of mineralization and dynamics of ore formation system .
基金Project(20080431380) supported by China Postdoctoral Science Foundation
文摘Abstract： A joint solution model of variabk：-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated by the finite element method （FEM）. The results are basically consistent with relative experimental data. The calculated average heat transfer coefficient reaches 1.7~105 W/（m2. K）. When the equal percentage valve is used, the system needs the minimum requirements of valve control, but brings the highest construction cost. With the： decrease of initial steam pressure, the heat transfer intensity also weakens but the steam flow increases. With the initial water filling coefficient increasing or the temperature of steam supply decreasing, the amount of accumulative steam flow increases with the growth of steam pressure. When the pressure of steam supply drops, the steam flow gradient increases during the maximum opening period of control valve, and causes the maximum steam flow to increase.
