A theory of （4＋1）-dimensional gravity is developed on the basis of the teleparallel theory equivalent to general relativity. The fundamental gravitational field variables are the five-dimensional vector fields （pe...A theory of （4＋1）-dimensional gravity is developed on the basis of the teleparallel theory equivalent to general relativity. The fundamental gravitational field variables are the five-dimensional vector fields （pentad）, defined globally on a manifold M, and gravity is attributed to the torsion. The Lagrangian density is quadratic in the torsion tensor. We then give the exact five-dimensional solution. The solution is a generalization of the familiar Schwarzschild and Kerr solutions of the four-dimensional teleparallel equivalent of general relativity. We also use the definition of the gravitational energy to calculate the energy and the spatial momentum.展开更多
In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
Five-dimensional seismic data encompasses seismic reflection wavefield information across three-dimensional space,offset,and observation azimuth.The interpretation of such data offers a novel approach for high-precisi...Five-dimensional seismic data encompasses seismic reflection wavefield information across three-dimensional space,offset,and observation azimuth.The interpretation of such data offers a novel approach for high-precision characterization of complex oil and gas reservoirs.This paper reviews key scientific issues and foundational research related to five-dimensional seismic data interpretation,with a particular emphasis on major advances in techniques involving rock physics theories,seismic attribute analysis,seismic inversion optimization,fracture prediction,in-situ stress estimation,and fluid identification,both domestically and internationally.It further explores the opportunities,challenges,and future directions in the development of theories and methods for interpreting five-dimensional seismic data.Theoretical research and real applications have shown that constructing a five-dimensional seismic rock physics model—incorporating temperature and pressure conditions,strong heterogeneity and anisotropy,and other microscopic rock physics mechanisms—provides the physical basis for seismically identifying different types of complex reservoirs.Additionally,the development of robust inversion and quantitative interpretation methods tailored to fractured reservoirs can address issues such as computational instability and low information utilization often associated with massive high-dimensional datasets.Innovations in fracture prediction technology,leveraging multi-dimensional information fusion attributes—including five-dimensional geometric attributes,azimuthal elastic modulus ellipse fitting,Fourier series decomposition,and azimuthal inversion attributes—have proven effective in enhancing fracture prediction accuracy.Moreover,the establishment of five-dimensional seismic prediction methods for engineering sweet spots(e.g.,reservoir brittleness and in-situ stress)based on anisotropy theory enables effective evaluation of the fracturability of subsurface formations.The application of five-dimensional seismic interpretation theory and technology provides a new pathway for predicting complex reservoirs and oil-gas identification.展开更多
In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→...In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.展开更多
Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar...Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.展开更多
Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analyt...Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.展开更多
Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development...Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development of mechanization,wide-row spacing substrate cultivation became an optimize mode of the greenhouse cucumber cultivation,aligning with the trend of intelligent agriculture.To determine the optimal nutrient solution supply amount(NS)and supply frequency(SF)for promoting the integrated growth of cucumber under wide-row spacing substrate cultivation,we explored the effects of substrate supply amount(SS),NS,and SF on cucumber yield,quality,and element utilization efficiency.A five-level quadratic orthogonal rotation combination design with three experimental factors(NS,SF,and SS)was implemented for 23 coupling treatments over three growing seasons,including spring(2022S and 2023S)and autumn(2022A).The technique for order preference by similarity to ideal solution(TOPSIS)combining weights based on game theory was applied to construct cucumber comprehensive growth evaluation model.Single and two experimental factors analyses revealed significant effects of single factors and the coupling of NS-SS,NS-SF and SS-SF on the integrated growth of cucumber for all three growing seasons.For the NS-SF-SS combination,the optimal parameters for comprehensive cucumber growth were determined as follows:levels of^(-1).68 for NS,-0.7 for SF,and^(-1).682 for SS in 2022A;-0.43 for NS,-0.06 for SF,and 0.34 for SS in 2022S;0.3 for NS,-0.02 for SF,and 0.04 for SS in 2023S.Furthermore,for SS ranges of 2.00-3.01,3.01-4.50,4.50-5.99,5.99-7.00(L·plant^(-1)),the corresponding NS and SF intervals maximizing cucumber integrated growth in spring were:0.28-0.30(L·plant^(-1))and 6(times·d^(-1)),0.26-0.30(L·plant^(-1))and 6(times·d^(-1)),0.25-0.30(L·plant^(-1))and 6(times·d^(-1)),0.23-0.30(L·plant^(-1))and 6(times·d^(-1)),respectively.With the same SS,the corresponding NS and SF intervals that maximized cucumber integrated growth in autumn were:0.10(L·plant^(-1))and 8(times·d^(-1)),0.18(L·plant^(-1))and 7(times·d^(-1)),0.30(L·plant^(-1))and 6(times·d^(-1)),0.49(L·plant^(-1))and 5(times·d^(-1)),respectively.The results provide a theoretical basis for solution management,and further in-depth research on cucumber cultivation.展开更多
Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis ...Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.展开更多
In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of roc...In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.展开更多
Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding str...Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.展开更多
Generalised reduced masses with a set of equations governing the three relative motions between two of 3-bodies in their gravitational field are established,of which the dynamic characteristics of 3-body dynamics,fund...Generalised reduced masses with a set of equations governing the three relative motions between two of 3-bodies in their gravitational field are established,of which the dynamic characteristics of 3-body dynamics,fundamental bases of this paper,are revealed.Based on these findings,an equivalent system is developed,which is a 2-body system with its total mass,constant angular momentum,kinetic and potential energies same as the total ones of three relative motions,so that it can be solved using the well-known theory of the 2-body system.From the solution of an equivalent system with the revealed characteristics of three relative motions,the general theoretical solutions of the 3-body system are obtained in the curve-integration forms along the orbits in the imaged radial motion space.The possible periodical orbits with generalised Kepler’s law are presented.Following the description and mathematical demonstrations of the proposed methods,the examples including Euler’s/Lagrange’s problems,and a reported numerical one are solved to validate the proposed methods.The methods derived from the 3-body system are extended to N-body problems.展开更多
The Internet of Things(IoT)is integral to modern infrastructure,enabling connectivity among a wide range of devices from home automation to industrial control systems.With the exponential increase in data generated by...The Internet of Things(IoT)is integral to modern infrastructure,enabling connectivity among a wide range of devices from home automation to industrial control systems.With the exponential increase in data generated by these interconnected devices,robust anomaly detection mechanisms are essential.Anomaly detection in this dynamic environment necessitates methods that can accurately distinguish between normal and anomalous behavior by learning intricate patterns.This paper presents a novel approach utilizing generative adversarial networks(GANs)for anomaly detection in IoT systems.However,optimizing GANs involves tuning hyper-parameters such as learning rate,batch size,and optimization algorithms,which can be challenging due to the non-convex nature of GAN loss functions.To address this,we propose a five-dimensional Gray wolf optimizer(5DGWO)to optimize GAN hyper-parameters.The 5DGWO introduces two new types of wolves:gamma(γ)for improved exploitation and convergence,and theta(θ)for enhanced exploration and escaping local minima.The proposed system framework comprises four key stages:1)preprocessing,2)generative model training,3)autoencoder(AE)training,and 4)predictive model training.The generative models are utilized to assist the AE training,and the final predictive models(including convolutional neural network(CNN),deep belief network(DBN),recurrent neural network(RNN),random forest(RF),and extreme gradient boosting(XGBoost))are trained using the generated data and AE-encoded features.We evaluated the system on three benchmark datasets:NSL-KDD,UNSW-NB15,and IoT-23.Experiments conducted on diverse IoT datasets show that our method outperforms existing anomaly detection strategies and significantly reduces false positives.The 5DGWO-GAN-CNNAE exhibits superior performance in various metrics,including accuracy,recall,precision,root mean square error(RMSE),and convergence trend.The proposed 5DGWO-GAN-CNNAE achieved the lowest RMSE values across the NSL-KDD,UNSW-NB15,and IoT-23 datasets,with values of 0.24,1.10,and 0.09,respectively.Additionally,it attained the highest accuracy,ranging from 94%to 100%.These results suggest a promising direction for future IoT security frameworks,offering a scalable and efficient solution to safeguard against evolving cyber threats.展开更多
BACKGROUND Esophageal stricture ranks among the most significant complications following endoscopic submucosal dissection(ESD).Excessive fibrotic repair is a typical pathological feature leading to stenosis after ESD....BACKGROUND Esophageal stricture ranks among the most significant complications following endoscopic submucosal dissection(ESD).Excessive fibrotic repair is a typical pathological feature leading to stenosis after ESD.AIM To examine the effectiveness and underlying mechanism of Kangfuxin solution(KFX)in mitigating excessive fibrotic repair of the esophagus post-ESD.METHODS Pigs received KFX at 0.74 mL/kg/d for 21 days after esophageal full circumferential ESD.Endoscopic examinations occurred on days 7 and 21 post-ESD.In vitro,recombinant transforming growth factor(TGF)-β1(5 ng/mL)induced a fibrotic microenvironment in primary esophageal fibroblasts(pEsF).After 24 hours of KFX treatment(at 1.5%,1%,and 0.5%),expression ofα-smooth muscle actin-2(ACTA2),fibronectin(FN),and type collagen I was assessed.Profibrotic signaling was analyzed,including TGF-β1,Smad2/3,and phosphor-smad2/3(p-Smad2/3).RESULTS Compared to the Control group,the groups treated with KFX and prednisolone exhibited reduced esophageal stenosis,lower weight loss rates,and improved food tolerance 21 d after ESD.After treatment,Masson staining revealed thinner and less dense collagen fibers in the submucosal layer.Additionally,the expression of fibrotic effector molecules was notably inhibited.Mechanistically,KFX downregulated the transduction levels of fibrotic functional molecules such as TGF-β1,Smad2/3,and p-Smad2/3.In vitro,pEsF exposed to TGF-β1-induced fibrotic microenvironment displayed increased fibrotic activity,which was reversed by KFX treatment,leading to reduced activation of ACTA2,FN,and collagen I.The 1.5%KFX treatment group showed decreased expression of p-Smad 2/3 in TGF-β1-activated pEsF.CONCLUSION KFX showed promise as a therapeutic option for post-full circumferential esophageal ESD strictures,potentially by suppressing fibroblast fibrotic activity through modulation of the TGF-β1/Smads signaling pathway.展开更多
Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method mor...Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.展开更多
Ultrathin Li-rich Li-Cu binary alloy has become a competitive anode material for Li metal batteries of high energy density.However,due to the poor-lithiophilicity of the single skeleton structure of Li-Cu alloy,it has...Ultrathin Li-rich Li-Cu binary alloy has become a competitive anode material for Li metal batteries of high energy density.However,due to the poor-lithiophilicity of the single skeleton structure of Li-Cu alloy,it has limitations in inducing Li nucleation and improving electrochemical performance.Hence,we introduced Ag species to Li-Cu alloy to form a 30μm thick Li-rich Li-Cu-Ag ternary alloy(LCA)anode,with Li-Ag infinite solid solution as the active phase,and Cu-based finite solid solutions as three-dimensional(3D)skeleton.Such nano-wire networks with LiCu4 and CuxAgy finite solid solution phases were prepared through a facile melt coating technique,where Ag element can act as lithiophilic specie to enhance the lithiophilicity of built-in skeleton,and regulate the deposition behavior of Li effectively.Notably,the formation of CuxAgy solid solution can strengthen the structural stability of the skeleton,ensuring the geometrical integrity of Li anode,even at the fully delithiated state.Meanwhile,the Li-Ag infinite solid solution phase can promote the Li plating/stripping reversibility of the LCA anode with an improved coulombic efficiency(CE).The synergistic effect between infinite and finite solid solutions could render an enhanced electrochemical performance of Li metal batteries.The LCA|LCA symmetric cells showed a long lifespan of over 600 h with stable polarization voltage of 40 mV,in 1 mA·cm^(-2)/1 mAh·cm^(-2).In addition,the full cells matching our ultrathin LCA anode with 17.2 mg·cm^(-2)mass loading of LiFePO_(4) cathode,can continuously operate beyond 110 cycles at 0.5C,with a high capacity retention of 91.5%.Kindly check and confirm the edit made in the article title.展开更多
Colorectal cancer(CRC)is a prevalent malignancy worldwide,posing a significant public health concern.Mounting evidence has confirmed that timely early screening facilitates the detection of incipient CRC,thereby enhan...Colorectal cancer(CRC)is a prevalent malignancy worldwide,posing a significant public health concern.Mounting evidence has confirmed that timely early screening facilitates the detection of incipient CRC,thereby enhancing patient prognosis.Obviously,non-participation of asymptomatic individuals in screening programs hampers early diagnosis and may adversely affect long-term outcomes for CRC patients.In this letter,we provide a comprehensive overview of the current status of early screening practices,while also thoroughly examine the dilemmas and potential solutions associated with early screening for CRC.In response to these issues,we proffer a set of recommendations directed at governmental authorities and the general public,which focus on augmenting financial investment,establishing standardized screening protocols,advancing technological capabilities,and bolstering public awareness campaigns.The importance of collaborative efforts from various stakeholders cannot be overstated in the quest to enhance early detection rates and alleviate the societal burden of CRC.展开更多
The performance of Mg alloys is significantly influenced by the concentrations and solid solution behavior of the alloying elements.In this work,the solid solution behavior of 20 alloying elements in 190 ternary Mg al...The performance of Mg alloys is significantly influenced by the concentrations and solid solution behavior of the alloying elements.In this work,the solid solution behavior of 20 alloying elements in 190 ternary Mg alloy systems at 500℃are systematically investigated.The solid solution behavior of a set of two different alloying elements in Mg alloy systems are suggested to be classified into three categories:inclusivity,exclusivity and proportionality.Inclusivity classification indicates that the two alloying elements are inclusive inα-Mg,increasing the joint solubility of both elements.Exclusivity classification suggests that the two alloying elements have a low joint solid solubility inα-Mg,since they prefer to form stable second phases.For the proportionality classification,the solubility curve of the ternary Mg alloy systems is a straight line connecting the solubility points of the two sub-binary systems.The proposed classification theory was validated by key experiments and the calculation of formation energies.The interaction effects between alloying elements and the preference of formation of second phases are the main factors determining the solid solution behavior classifications.Based on the observed solid solution features of multi-component Mg alloys,principles for alloy design of different types of high-performance Mg alloys were proposed in this work.展开更多
Background:Isotonic crystalloids are recommended as the first choice for fluid therapy in acute pan-creatitis(AP),with normal saline(NS)and lactate Ringer’s(LR)used most often.Evidence based recom-mendations on the t...Background:Isotonic crystalloids are recommended as the first choice for fluid therapy in acute pan-creatitis(AP),with normal saline(NS)and lactate Ringer’s(LR)used most often.Evidence based recom-mendations on the type of fluid are conflicting and generally come from small single-center randomized controlled trials(RCTs).We therefore conducted a systematic review and meta-analysis to compare the effect of balanced solutions(BS)versus NS on patient-centered clinical outcomes in AP.Methods:From four databases searched up to October 2024,we included only RCTs of adult patients with AP that compared the use of BS(including LR,acetate Ringer’s,etc.)with NS.The primary out-come was the disease advances from AP to moderately severe and severe AP(MSAP/SAP).Trial sequential analyses(TSA)were conducted to control for type-I and type-II errors and Grading of Recommendations Assessment,Development,and Evaluation(GRADE)was used to assess the quality of evidence.Results:Six RCTs were identified and included,involving 260 patients treated with BS and 298 patients with NS.Patients who received the BS had less MSAP/SAP[odds ratio(OR)=0.50,95%confidence in-terval(CI):0.29 to 0.85,P=0.01,I^(2)=0%;5 studies,299 patients],reduced the need of ICU admission(OR=0.60,95%CI:0.39 to 0.93,P=0.02,I^(2)=0%;5 studies,507 patients)and shorter length of hospital stay[mean difference(MD)=-0.88,95%CI:-1.48 to-0.28,P=0.004,I^(2)=0%;6 studies,558 patients;confirmed by TSA with high certainty]compared with those who received NS.The evidence for most of the clinical outcomes was rated as moderate to low due to the risk of bias,imprecision and inconsistency.Conclusions:BS,compared with NS,was associated with improved clinical outcomes in patients with AP.However,given the moderate to low quality of evidence for most of the outcomes assessed,further trials are warranted.展开更多
文摘A theory of （4＋1）-dimensional gravity is developed on the basis of the teleparallel theory equivalent to general relativity. The fundamental gravitational field variables are the five-dimensional vector fields （pentad）, defined globally on a manifold M, and gravity is attributed to the torsion. The Lagrangian density is quadratic in the torsion tensor. We then give the exact five-dimensional solution. The solution is a generalization of the familiar Schwarzschild and Kerr solutions of the four-dimensional teleparallel equivalent of general relativity. We also use the definition of the gravitational energy to calculate the energy and the spatial momentum.
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
基金supported by the Key Projects of the National Natural Science Foundation of China(Grant Nos.42430809,42030103).
文摘Five-dimensional seismic data encompasses seismic reflection wavefield information across three-dimensional space,offset,and observation azimuth.The interpretation of such data offers a novel approach for high-precision characterization of complex oil and gas reservoirs.This paper reviews key scientific issues and foundational research related to five-dimensional seismic data interpretation,with a particular emphasis on major advances in techniques involving rock physics theories,seismic attribute analysis,seismic inversion optimization,fracture prediction,in-situ stress estimation,and fluid identification,both domestically and internationally.It further explores the opportunities,challenges,and future directions in the development of theories and methods for interpreting five-dimensional seismic data.Theoretical research and real applications have shown that constructing a five-dimensional seismic rock physics model—incorporating temperature and pressure conditions,strong heterogeneity and anisotropy,and other microscopic rock physics mechanisms—provides the physical basis for seismically identifying different types of complex reservoirs.Additionally,the development of robust inversion and quantitative interpretation methods tailored to fractured reservoirs can address issues such as computational instability and low information utilization often associated with massive high-dimensional datasets.Innovations in fracture prediction technology,leveraging multi-dimensional information fusion attributes—including five-dimensional geometric attributes,azimuthal elastic modulus ellipse fitting,Fourier series decomposition,and azimuthal inversion attributes—have proven effective in enhancing fracture prediction accuracy.Moreover,the establishment of five-dimensional seismic prediction methods for engineering sweet spots(e.g.,reservoir brittleness and in-situ stress)based on anisotropy theory enables effective evaluation of the fracturability of subsurface formations.The application of five-dimensional seismic interpretation theory and technology provides a new pathway for predicting complex reservoirs and oil-gas identification.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12361040,12061064)the National Science Foundation of Gansu Province(Grant No.22JR5RA264)State Scholarship Fund(Grant No.20230862021).
文摘In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.
文摘Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.
基金supported by the National Natural Science Foundation of China(No.41941018)Shanghai Gaofeng Discipline Construction Funding.
文摘Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.
基金supported by the China Agriculture Research System(Grant No.CARS-23-D06)the Key Research and Development Program of Shaanxi Province(Grant Nos.2024NC2-GJHX-29 and 2024NC-ZDCYL-05-08)Shaanxi Agricultural Collaborative Innovation and Extension Alliance Project(Grant No.LMZD202202).
文摘Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development of mechanization,wide-row spacing substrate cultivation became an optimize mode of the greenhouse cucumber cultivation,aligning with the trend of intelligent agriculture.To determine the optimal nutrient solution supply amount(NS)and supply frequency(SF)for promoting the integrated growth of cucumber under wide-row spacing substrate cultivation,we explored the effects of substrate supply amount(SS),NS,and SF on cucumber yield,quality,and element utilization efficiency.A five-level quadratic orthogonal rotation combination design with three experimental factors(NS,SF,and SS)was implemented for 23 coupling treatments over three growing seasons,including spring(2022S and 2023S)and autumn(2022A).The technique for order preference by similarity to ideal solution(TOPSIS)combining weights based on game theory was applied to construct cucumber comprehensive growth evaluation model.Single and two experimental factors analyses revealed significant effects of single factors and the coupling of NS-SS,NS-SF and SS-SF on the integrated growth of cucumber for all three growing seasons.For the NS-SF-SS combination,the optimal parameters for comprehensive cucumber growth were determined as follows:levels of^(-1).68 for NS,-0.7 for SF,and^(-1).682 for SS in 2022A;-0.43 for NS,-0.06 for SF,and 0.34 for SS in 2022S;0.3 for NS,-0.02 for SF,and 0.04 for SS in 2023S.Furthermore,for SS ranges of 2.00-3.01,3.01-4.50,4.50-5.99,5.99-7.00(L·plant^(-1)),the corresponding NS and SF intervals maximizing cucumber integrated growth in spring were:0.28-0.30(L·plant^(-1))and 6(times·d^(-1)),0.26-0.30(L·plant^(-1))and 6(times·d^(-1)),0.25-0.30(L·plant^(-1))and 6(times·d^(-1)),0.23-0.30(L·plant^(-1))and 6(times·d^(-1)),respectively.With the same SS,the corresponding NS and SF intervals that maximized cucumber integrated growth in autumn were:0.10(L·plant^(-1))and 8(times·d^(-1)),0.18(L·plant^(-1))and 7(times·d^(-1)),0.30(L·plant^(-1))and 6(times·d^(-1)),0.49(L·plant^(-1))and 5(times·d^(-1)),respectively.The results provide a theoretical basis for solution management,and further in-depth research on cucumber cultivation.
基金funded by the research startup funding of National Research Foundation (NRF) of Korea through the Ministry of Science and ICT 2022R1G1A1009887Part of this study was supported by research start-up funding of Anhui University (S202418001/078)。
文摘Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2024ZD1700201)the National Natural Science Foundation of China(Nos.U2034206,51974014 and 51574014)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2024A1515011631)the National Key Research and Development Project of China(No.2022YFC3004601)。
文摘In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.
基金supported by the National Key R&D Program of China (No. 2018YFA0707300)the National Natural Science Foundation of China (No. 52374376)the Introduction Plan for High end Foreign Experts, China (No. G2023105001L)。
文摘Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.
基金supported by the National Key R&D Program of China(2023YFA1406200)the National Natural Science Foundation of China(T2521005,12174144,12474009,12174146,and 124B2059)the Special Construction Project Fund for Shan-dong Province Taishan Scholars.
文摘Multifunctional optical responsive materials have grown increasingly pivotal in addressingthe escalating demands of sensing,detection,and anti-counterfeiting applications[1,2].These materials exhibit distinct visible optical variations upon exposure to external stimuli,such as pressure,temperature,light,solvents,pH fluctuations,or mechanical force.Fluorescent sensing and anti-counterfeiting technologies leveraging these optical responses have emerged as highly promising solutions.
文摘Generalised reduced masses with a set of equations governing the three relative motions between two of 3-bodies in their gravitational field are established,of which the dynamic characteristics of 3-body dynamics,fundamental bases of this paper,are revealed.Based on these findings,an equivalent system is developed,which is a 2-body system with its total mass,constant angular momentum,kinetic and potential energies same as the total ones of three relative motions,so that it can be solved using the well-known theory of the 2-body system.From the solution of an equivalent system with the revealed characteristics of three relative motions,the general theoretical solutions of the 3-body system are obtained in the curve-integration forms along the orbits in the imaged radial motion space.The possible periodical orbits with generalised Kepler’s law are presented.Following the description and mathematical demonstrations of the proposed methods,the examples including Euler’s/Lagrange’s problems,and a reported numerical one are solved to validate the proposed methods.The methods derived from the 3-body system are extended to N-body problems.
基金described in this paper has been developed with in the project PRESECREL(PID2021-124502OB-C43)。
文摘The Internet of Things(IoT)is integral to modern infrastructure,enabling connectivity among a wide range of devices from home automation to industrial control systems.With the exponential increase in data generated by these interconnected devices,robust anomaly detection mechanisms are essential.Anomaly detection in this dynamic environment necessitates methods that can accurately distinguish between normal and anomalous behavior by learning intricate patterns.This paper presents a novel approach utilizing generative adversarial networks(GANs)for anomaly detection in IoT systems.However,optimizing GANs involves tuning hyper-parameters such as learning rate,batch size,and optimization algorithms,which can be challenging due to the non-convex nature of GAN loss functions.To address this,we propose a five-dimensional Gray wolf optimizer(5DGWO)to optimize GAN hyper-parameters.The 5DGWO introduces two new types of wolves:gamma(γ)for improved exploitation and convergence,and theta(θ)for enhanced exploration and escaping local minima.The proposed system framework comprises four key stages:1)preprocessing,2)generative model training,3)autoencoder(AE)training,and 4)predictive model training.The generative models are utilized to assist the AE training,and the final predictive models(including convolutional neural network(CNN),deep belief network(DBN),recurrent neural network(RNN),random forest(RF),and extreme gradient boosting(XGBoost))are trained using the generated data and AE-encoded features.We evaluated the system on three benchmark datasets:NSL-KDD,UNSW-NB15,and IoT-23.Experiments conducted on diverse IoT datasets show that our method outperforms existing anomaly detection strategies and significantly reduces false positives.The 5DGWO-GAN-CNNAE exhibits superior performance in various metrics,including accuracy,recall,precision,root mean square error(RMSE),and convergence trend.The proposed 5DGWO-GAN-CNNAE achieved the lowest RMSE values across the NSL-KDD,UNSW-NB15,and IoT-23 datasets,with values of 0.24,1.10,and 0.09,respectively.Additionally,it attained the highest accuracy,ranging from 94%to 100%.These results suggest a promising direction for future IoT security frameworks,offering a scalable and efficient solution to safeguard against evolving cyber threats.
基金Supported by Science and Technology Department of Sichuan Province,No.2020YFS0376National Natural Science Foundation of China,No.81900599Science and Technology Program of Hospital of TCM,Southwest Medical University,No.2022-CXTD-01.
文摘BACKGROUND Esophageal stricture ranks among the most significant complications following endoscopic submucosal dissection(ESD).Excessive fibrotic repair is a typical pathological feature leading to stenosis after ESD.AIM To examine the effectiveness and underlying mechanism of Kangfuxin solution(KFX)in mitigating excessive fibrotic repair of the esophagus post-ESD.METHODS Pigs received KFX at 0.74 mL/kg/d for 21 days after esophageal full circumferential ESD.Endoscopic examinations occurred on days 7 and 21 post-ESD.In vitro,recombinant transforming growth factor(TGF)-β1(5 ng/mL)induced a fibrotic microenvironment in primary esophageal fibroblasts(pEsF).After 24 hours of KFX treatment(at 1.5%,1%,and 0.5%),expression ofα-smooth muscle actin-2(ACTA2),fibronectin(FN),and type collagen I was assessed.Profibrotic signaling was analyzed,including TGF-β1,Smad2/3,and phosphor-smad2/3(p-Smad2/3).RESULTS Compared to the Control group,the groups treated with KFX and prednisolone exhibited reduced esophageal stenosis,lower weight loss rates,and improved food tolerance 21 d after ESD.After treatment,Masson staining revealed thinner and less dense collagen fibers in the submucosal layer.Additionally,the expression of fibrotic effector molecules was notably inhibited.Mechanistically,KFX downregulated the transduction levels of fibrotic functional molecules such as TGF-β1,Smad2/3,and p-Smad2/3.In vitro,pEsF exposed to TGF-β1-induced fibrotic microenvironment displayed increased fibrotic activity,which was reversed by KFX treatment,leading to reduced activation of ACTA2,FN,and collagen I.The 1.5%KFX treatment group showed decreased expression of p-Smad 2/3 in TGF-β1-activated pEsF.CONCLUSION KFX showed promise as a therapeutic option for post-full circumferential esophageal ESD strictures,potentially by suppressing fibroblast fibrotic activity through modulation of the TGF-β1/Smads signaling pathway.
基金supported by the National Natural Science Foun-dation of China(Nos.52025028,52332008,52372214,52202273,and U22A20137)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions.
文摘Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.
基金supported by the National Natural Science Foundation of China(Nos.22379019,52172184)Sichuan Science and Technology Program(No.2024YFHZ0313)S&T Special Program of Huzhou(No.2023GZ03)。
文摘Ultrathin Li-rich Li-Cu binary alloy has become a competitive anode material for Li metal batteries of high energy density.However,due to the poor-lithiophilicity of the single skeleton structure of Li-Cu alloy,it has limitations in inducing Li nucleation and improving electrochemical performance.Hence,we introduced Ag species to Li-Cu alloy to form a 30μm thick Li-rich Li-Cu-Ag ternary alloy(LCA)anode,with Li-Ag infinite solid solution as the active phase,and Cu-based finite solid solutions as three-dimensional(3D)skeleton.Such nano-wire networks with LiCu4 and CuxAgy finite solid solution phases were prepared through a facile melt coating technique,where Ag element can act as lithiophilic specie to enhance the lithiophilicity of built-in skeleton,and regulate the deposition behavior of Li effectively.Notably,the formation of CuxAgy solid solution can strengthen the structural stability of the skeleton,ensuring the geometrical integrity of Li anode,even at the fully delithiated state.Meanwhile,the Li-Ag infinite solid solution phase can promote the Li plating/stripping reversibility of the LCA anode with an improved coulombic efficiency(CE).The synergistic effect between infinite and finite solid solutions could render an enhanced electrochemical performance of Li metal batteries.The LCA|LCA symmetric cells showed a long lifespan of over 600 h with stable polarization voltage of 40 mV,in 1 mA·cm^(-2)/1 mAh·cm^(-2).In addition,the full cells matching our ultrathin LCA anode with 17.2 mg·cm^(-2)mass loading of LiFePO_(4) cathode,can continuously operate beyond 110 cycles at 0.5C,with a high capacity retention of 91.5%.Kindly check and confirm the edit made in the article title.
文摘Colorectal cancer(CRC)is a prevalent malignancy worldwide,posing a significant public health concern.Mounting evidence has confirmed that timely early screening facilitates the detection of incipient CRC,thereby enhancing patient prognosis.Obviously,non-participation of asymptomatic individuals in screening programs hampers early diagnosis and may adversely affect long-term outcomes for CRC patients.In this letter,we provide a comprehensive overview of the current status of early screening practices,while also thoroughly examine the dilemmas and potential solutions associated with early screening for CRC.In response to these issues,we proffer a set of recommendations directed at governmental authorities and the general public,which focus on augmenting financial investment,establishing standardized screening protocols,advancing technological capabilities,and bolstering public awareness campaigns.The importance of collaborative efforts from various stakeholders cannot be overstated in the quest to enhance early detection rates and alleviate the societal burden of CRC.
基金financially supported by National Natural Science Foundation of China(grant numbers:52171100,U20A20234)National Key R&D Program of China(grant number:2021YFB3701100)。
文摘The performance of Mg alloys is significantly influenced by the concentrations and solid solution behavior of the alloying elements.In this work,the solid solution behavior of 20 alloying elements in 190 ternary Mg alloy systems at 500℃are systematically investigated.The solid solution behavior of a set of two different alloying elements in Mg alloy systems are suggested to be classified into three categories:inclusivity,exclusivity and proportionality.Inclusivity classification indicates that the two alloying elements are inclusive inα-Mg,increasing the joint solubility of both elements.Exclusivity classification suggests that the two alloying elements have a low joint solid solubility inα-Mg,since they prefer to form stable second phases.For the proportionality classification,the solubility curve of the ternary Mg alloy systems is a straight line connecting the solubility points of the two sub-binary systems.The proposed classification theory was validated by key experiments and the calculation of formation energies.The interaction effects between alloying elements and the preference of formation of second phases are the main factors determining the solid solution behavior classifications.Based on the observed solid solution features of multi-component Mg alloys,principles for alloy design of different types of high-performance Mg alloys were proposed in this work.
文摘Background:Isotonic crystalloids are recommended as the first choice for fluid therapy in acute pan-creatitis(AP),with normal saline(NS)and lactate Ringer’s(LR)used most often.Evidence based recom-mendations on the type of fluid are conflicting and generally come from small single-center randomized controlled trials(RCTs).We therefore conducted a systematic review and meta-analysis to compare the effect of balanced solutions(BS)versus NS on patient-centered clinical outcomes in AP.Methods:From four databases searched up to October 2024,we included only RCTs of adult patients with AP that compared the use of BS(including LR,acetate Ringer’s,etc.)with NS.The primary out-come was the disease advances from AP to moderately severe and severe AP(MSAP/SAP).Trial sequential analyses(TSA)were conducted to control for type-I and type-II errors and Grading of Recommendations Assessment,Development,and Evaluation(GRADE)was used to assess the quality of evidence.Results:Six RCTs were identified and included,involving 260 patients treated with BS and 298 patients with NS.Patients who received the BS had less MSAP/SAP[odds ratio(OR)=0.50,95%confidence in-terval(CI):0.29 to 0.85,P=0.01,I^(2)=0%;5 studies,299 patients],reduced the need of ICU admission(OR=0.60,95%CI:0.39 to 0.93,P=0.02,I^(2)=0%;5 studies,507 patients)and shorter length of hospital stay[mean difference(MD)=-0.88,95%CI:-1.48 to-0.28,P=0.004,I^(2)=0%;6 studies,558 patients;confirmed by TSA with high certainty]compared with those who received NS.The evidence for most of the clinical outcomes was rated as moderate to low due to the risk of bias,imprecision and inconsistency.Conclusions:BS,compared with NS,was associated with improved clinical outcomes in patients with AP.However,given the moderate to low quality of evidence for most of the outcomes assessed,further trials are warranted.
